Java Application has trouble

When I try to print a photograph with the Java-based Lightzone applicaiton, I get the following message:
Unknown error opening this file: com/apple/cocoa/foundation/NSArray
Can anyone interpret the message for me - ie tell me where this file is supposed to be, and why it is not there?

Thanks for replying so quickly..
Here is the sight..
http://www.cuevana.tv/

Similar Messages

Install Error: "Invocation of this Java Application has caused an InvocationTargetException"

Hi
I am installing Weblogic v 6.0 sp2 on Sun Solaris 8 on executing the command "
sh weblogic600sp2_sol.bin -i console" the installation starts and after selecting
the language as English, console displays the following error and the installation
stops, please advice
"Invocation of this Java Application has caused an InvocationTargetException.
This application will now exit. (LAX)
Stack Trace:
java.lang.NullPointerException
at java.util.StringTokenizer.<init>(StringTokenizer.java:122)
at java.util.StringTokenizer.<init>(StringTokenizer.java:138)
at com.zerog.ia.installer.steps.ChooseJavaVM.j([DashoPro-V1.2-120198])
at com.zerog.ia.installer.steps.ChooseJavaVM.c([DashoPro-V1.2-120198])
at com.zerog.ia.installer.Main.a([DashoPro-V1.2-120198])
at com.zerog.ia.installer.Main.main([DashoPro-V1.2-120198])
at java.lang.reflect.Method.invoke(Native Method)
at com.zerog.lax.LAX.launch([DashoPro-V1.2-120198])
at com.zerog.lax.LAX.main([DashoPro-V1.2-120198])
GUI-"
Has someone faced similar problem before? I have also tried installing the WebLogic
Server 6.1 as well but I get the same error.
Thanks and Regards
Kapil Singh Pawar

Hi.
What jdk version is currently installed on your solaris 8 machine? If it is not
already a 1.3.x version I suggest you install that first and put the bin directory in
your path. You might also check with Sun to see if there are any relevant OS patches
required by your jdk (or jdk 1.3.1) in order to run.
Regards,
Michael
Kapil Pawar wrote:
Hi
I am installing Weblogic v 6.0 sp2 on Sun Solaris 8 on executing the command "
sh weblogic600sp2_sol.bin -i console" the installation starts and after selecting
the language as English, console displays the following error and the installation
stops, please advice
"Invocation of this Java Application has caused an InvocationTargetException.
This application will now exit. (LAX)
Stack Trace:
java.lang.NullPointerException
at java.util.StringTokenizer.<init>(StringTokenizer.java:122)
at java.util.StringTokenizer.<init>(StringTokenizer.java:138)
at com.zerog.ia.installer.steps.ChooseJavaVM.j([DashoPro-V1.2-120198])
at com.zerog.ia.installer.steps.ChooseJavaVM.c([DashoPro-V1.2-120198])
at com.zerog.ia.installer.Main.a([DashoPro-V1.2-120198])
at com.zerog.ia.installer.Main.main([DashoPro-V1.2-120198])
at java.lang.reflect.Method.invoke(Native Method)
at com.zerog.lax.LAX.launch([DashoPro-V1.2-120198])
at com.zerog.lax.LAX.main([DashoPro-V1.2-120198])
GUI-"
Has someone faced similar problem before? I have also tried installing the WebLogic
Server 6.1 as well but I get the same error.
Thanks and Regards
Kapil Singh Pawar--
Michael Young
Developer Relations Engineer
BEA Support

Cannot open MSWord while running java application

Hi everyone
I'm not sure if anyone has encountered this problem before.. I'm running a java application under Windows NT and when I try to open an office document it won't run until that java application has been shutdown. I don't even get an error message for this. Nothing happens at all until the application is shutdown and then MSWord just opens as if nothing had ever happened.
Anyone have any ideas as to what this problem might be?

As a guess.....
1. Run a "hello world" java application. Use task manager and take a snap shot of the processes window.
2. Run nothing else but the java application. Use task manager and take a snap shot of the processes window.
3. Compare the two and eliminate any that are the same.
4. Run nothing else but word. Use task manager and take a snap shot of the processes window.
5. Compare it with 3. Note the ones that appear both times.
6. Run the java application - use task manager to kill what you found in 5. Run word.
Step 6 will probably cause the java app to fail in some odd way. But now you know why it doesn't work.
Of course if nothing is the same in 5 above then that would be odd.

Use Sun Java Studio 2 with Existing Java Application

I have started using Sun Java Studio 2 and having fun and little difficulty creating a new Java web application from scatch. My question is where do I find information on Java Studio configuration to allow Java Studio to load up and modify Java server pages/forms in an existing Java application that I did not write?
The Java application has been created with Javabeans and using BEA Weblogic version 7, with a SQL-Server 2000 database backend.
Below is a bit of code out of one of the main Java forms.
<%@ page buffer="256kb" autoFlush="false" errorPage="../../common/system/error.jsp"
import="psdi.jsp.beans.*, psdi.jsp.common.*, psdi.jsp.app.wotrack.*, psdi.jsp.util.* , psdi.mbo.* , psdi.util.* "%>
I have looked around and have not found what I need to setup in Java Studio to allow me to load up a form and view it in the Visual designer, I keep getting errors on the psdi. references and cannot load up any pages.
I see on the server install ia folder under the main root <DIR> called <apps>, and inside the <apps> folder is a folder called <jsp> and in the <jsp> folder are sub folders for each main module within the application with all the related .jsp files. I have been manually editing the .jsp files using Windows Notpad and saving the changes. Then I rebuild the .ear file and my changes work fine. Since I have a lot of changes to make there has to be a better way than using Notpad.
My hope is somewhere is a point-by-point document on what to so I can use Sun Java Studio 2 to make my changes in a visual IDE.
Any assistance would really be appreciated.

Hi Giri,
Yep, this I know,b ut when I do I get errors messages and am looking for some form of point-bypoint instuction that better explains how to setup up custom libraries in Sun Java Studio, custom tags, etc.

Install Error "This Application has Unexpectedly Quit"

Anyone have this Java installation issue? Right after I
choose the language and try to install I get "This Application has
Unexpectedly Quit", followed by "Invocation of this Java
Application has caused an Invocation TargetExcepction...."
Thanks for any ideas.

An update on my previous post. I tried to reinstall itunes from the cd that came with it. It installed successfully and then when I went to find it in APPS and add it to my dock the system crashed
Here is the full message:
System Failure: cpu=0; code 00000008 (unknown failure code)
Latest Crash info for cpu0:
Exception state (sv=0x2A122780)
PC=0x00094080; MSR=0x00001030; DAR=0xF740C402; DSISR=0x40000000; LR=0x00093F8C; R1=-xFC14FB47; XCP=0x00000098 (System Failure)
backtrace terminated - unaligned frame address: 0xFC14FB47
Proceeding back via exception chain:
Exception State (sv=0x2A122780)
PC=0x0008C784; MSR=0x02143000; DAR=0xF740C402; DSISR=0x40000000; LR=0x0008AF24; R1=0xFC14FC27; XCP=0x00000008 (0x200 - Machine Check)
backtrace terminated - unaligned frame address: 0xFC14FC27
then it had another list of exception states, then it lists a Kernel Version:
Darwin Kernel Version 7.9.0 with an attached date
Then a Memory Access Exception (1,0,0)
an ethernet mac address
ip address
and Waiting for debugger connection.
After this it is doing nothing. It is frozen on the screen. I'm not sure those numbers and letters will help anyone identify the issue but I thought I'd try.
Any help would be HUGELY appreciated!!

Just recently my iPad started to get lazy on me I'll go on a website and it has trouble moving through the different applications within it. It has nothing to do with the wifi because it's doing it no matter what wifi it is using at the time.

Just recently my iPad started to get lazy on me I'll go on a website and it has trouble moving through the different applications within it. It has nothing to do with the wifi because it's doing it no matter what wifi it is using at the time?

Not sure what you are talking about.

WD java application in UWL link has authentication problems !

Hi ,
I am facing a starnge problem in UWL. I am trying to open an WD Java application upon clicking of UWL workitem. In the WdDoInit() method I have RFC present in R3-HR system. but Rfc execution could not be done when I click UWL work item and it opens in a new window. When I execute same application from place like through an Iview, it works fine. I feel WD_MODELDATA_DEST tickets are not being passed .
for the work arond I made application prperty Authentication to true. When I opens for the first time , application hits rfc n fetch out data. but strangely on the second time onwards it prompts me for user authentication.
Kindly give me possible solutions .
Thanks
Abhay

Hi,
1. Have you done the all the visualization settings in SWFVISU?
2. If yes then did you re-register the server you are using?
2. Are you able to view the WDJ view while clicking the link in UWL?
and one more thing WdDoInit() will execute only once.
please check the above things
Regards
SM Nizamudeen

Run java application on mainframes

i have a financial application which needs to run java application on mainframes. Any ideas how i may do it. where do i get the jvm for the various OS. !

Thank you all for the reply. I have noted regarding jvm for OS390. Trouble is we have > 30 banks where this application has to be installed and run and these are very old systems like nsk and ve. so this would mean we need to have the jvm for all the different OS running. i would collect more info on the various OS before deciding if it can be done in java.

Standalone java application that calls Db2

Hi,
I am trying to use coherence in my standalone java
application that makes JDBC calls to Db2.
The sql statemet is like below:
select lastName,firstName from employee where empNo=2224;
In the application,I would read from the flat file say
200 account numbers and query the database.
If I have queried the database already with the given
account,I want to retreive from the cache.
I am having real trouble in getting this work with
coherence software.
Any psudo code in this regard will help me a lot.
Thanks
DJon

Hi Jon,
Thanks for the mail.I am struck in
implementing the coherence in the sample program.
any help in this regard is appreciated.
Thanks
DJon
Below is the sample program that works without coherence.go to db2 and get the information.
import java.sql.*;
import java.util.*;
public class DB2Client
static void printColumn(String in)
System.out.print(in);
System.out.print(" | ");
public static void main(String[] args)
Driver myDriver = null;
Connection myConnection = null;
try
myDriver =
(Driver)Class.forName("com.ibm.db2.jcc.DB2Driver").newInstance();
myConnection =
DriverManager.getConnection("jdbc:db2:sample","dujon","jeff");
PreparedStatement myStatement
= myConnection.prepareStatement("SELECT
empno,firstnme,lastname FROM employee where empno > ?");
myStatement.setString(1,"00");
ResultSet
myResults=myStatement.executeQuery();
while (myResults.next())
printColumn(myResults.getString("empno") + "");
printColumn(myResults.getString("firstnme") + "");
printColumn(myResults.getString("lastname"));
System.out.println();
} catch (Exception e)
e.printStackTrace();
} finally
try
if (myConnection != null)
myConnection.close();
} catch (Exception e)
Now,to implement the above sample with
coherence I have written 2 programs.
1. TangosolDB2Cache.java
2. TestDB2Cache.java
import com.tangosol.net.cache.CacheStore;
import com.tangosol.util.Base;
import java.sql.DriverManager;
import java.sql.Connection;
import java.sql.PreparedStatement;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.util.Collection;
import java.util.Iterator;
import java.util.LinkedList;
import java.util.List;
import java.util.Map;
* An example implementation of CacheStore
* interface.
* @author erm 2003.05.01
public class TangosolDB2Cache extends
Base implements CacheStore
// ----- constructors
* Constructs DBCacheStore for a given
database table.
* @param sTableName the db table name
public TangosolJDBCCache(String
sTableName)
m_sTableName = sTableName;
configureConnection();
     * Set up the DB connection.
     protected void configureConnection()
          try
Class.forName("com.ibm.db2.jcc.DB2Driver");
               m_con =
DriverManager.getConnection(DB_URL, DB_USERNAME, DB_PASSWORD);
               m_con.setAutoCommit(true);
          catch (Exception e)
               throw ensureRuntimeException(e,
"Connection failed");
     // ---- accessors
* Obtain the name of the table this
CacheStore is persisting to.
* @return the name of the table this
CacheStore is persisting to
public String getTableName()
return m_sTableName;
* Obtain the connection being used to
connect to the database.
* @return the connection used to
connect to the database
public Connection getConnection()
return m_con;
// ----- CacheStore Interface
* Return the value associated with the
specified key, or null if the
* key does not have an associated
value in the underlying store.
* @param oKey key whose associated
value is to be returned
* @return the value associated with
the specified key, or
* <tt>null</tt> if no value is
available for that key
public Object load(Object oKey)
Integer iKey = (Integer)key;
     return query("select
lastName,firstName from employee where empNo = " + iKey);
* Store the specified value under the
specific key in the underlying
* store. This method is intended to
support both key/value creation
* and value update for a specific key.
* @param oKey key to store the
value under
* @param oValue value to be stored
* @throws
UnsupportedOperationException if this implementation or the
* underlying store is
read-only
public void store(Object oKey, Object
oValue)
          mycacheTable(oKey,oValue);
public void erase(Object oKey)
     public void eraseAll(Collection
colKeys)
          throw new
UnsupportedOperationException();
     public Map loadAll(Collection colKeys)
          throw new
UnsupportedOperationException();
     public void storeAll(Map mapEntries)
          throw new
UnsupportedOperationException();
     // ----- data members
     Hashtable mycacheTable = new Hashtable(1000);
     * The connection.
     protected Connection m_con;
     * The db table name.
     protected String m_sTableName;
     * Driver class name.
     private static final String DB_DRIVER =
"org.gjt.mm.mysql.Driver";
     * Connection URL.
     private static final String DB_URL =
"jdbc:db2:sample";
     * User name.
     private static final String DB_USERNAME =
"dujon";
     * Password.
     private static final String DB_PASSWORD =
"jeff";
TESTING THE ABOVE PROGRAM
import com.tangosol.net.cache.CacheStore;
import com.tangosol.util.Base;
import
com.tangosol.net.cache.MapCacheStore;
import java.sql.DriverManager;
import java.sql.Connection;
import java.sql.PreparedStatement;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.util.Collection;
import java.util.Iterator;
import java.util.LinkedList;
import java.util.List;
import java.util.Map;
public class TestDB2Cache {
     public static void main(String args[]){
                    TangosolJDBCCache mycache = new
TangosolDB2Cache("employee");
                    Connection
con=mycache.configureConnection();
                    MapCacheStore cacheStuff = new
MapCacheStore(HashMap hmap);
                    String[] employeeNumbers =
{"000010","000020","000030","000040","000050"};
                              // find whether it has been cached already
                                   for(int
i=0;i<employeeNumbers.length();i++){
                                   oCurValue =
cacheStuff.load(employeeNumbers);
                                   if(oCurValue == null){
                                        // execute SQL statement
                                        con.executeQuery(oCurKey);
                                   else
                                        //get from cache the values and return
                                        cacheStuff.load(oCurKey);

Launching a java application from another java application

Hi,
I'm facing an interesting challenge :-)
Inside a Java application, I want to start another java application.
Possible solutions in my list :
1. Using jakarta commons launcher.
2. Runtime.exec (make the code platform dependent).
3. Starting the main method of the other app by create a new Thread inside the current app
4. I know people did this by calling an ant target from the java application but I don't have
any sample code, I appreciate any sample code for it.
Thanks,
Ali Salehi

That is an iteresting challenge :)Don't be mean; he's polite, done some investigation and taken the trouble to be clear. The question, presumably, is "has anyone got a different solution or a preference as to which of these is the best?"
In which case, my advice would be to say that invoking main in a separate thread is fundamentally different from Runtime.exec() because the former would run in the same JVM. Is this what you want? If one app has the other on its classpath then do they need to be separate apps? Could they be modules of a single app?

Running the Batch Processor from a Java application (on schedule)

Hello,
I would like to run the Batch Processor (on schedule) from a Java application -- not from the Command Prompt.
To achieve that, I suppose I would need to call a certain function contained in engine/determinations-batch.jar, using perhaps the path to the config xml as an argument.
The trouble is that the OPA developer's guide doesn't mention it (or at least I didn't find it).
Could you help me out?
Thanks in advance.
Razvan

RazvanSaftescu wrote:
Thanks Frank, but is there a way to identify this method and its syntax? I didn't find anything so far on the internet or on the dev's guide.
This is the Java main method for the determination-batch.jar file - so the main method has the syntax:
public static void main(String[] args)
args is an array of strings matching the command line arguments described in the OPA Developer's Guide topic "Configure the Batch Processor".
Regards,
Brad

How to let users run your Java application

Hello,
I'm writing an application using JBuilder7 and it's wonderful designer: so far it is composed by only 2 class and imports java.awt.* and javax.swing.* (SDK 1.4)
Now, I've yet to finish it but I was wondering: "how will users be able to use it?"
I don't want them to install 30+ Mb of SDK so I've looked into the forums and elsewhere and come up with several answers:
1) Let them install JRE: but it's 10+ Mb and they would need to download it separately from my program.
2) Let them use somehow their browser's JVM..(should I turn my application into applet for this? I guess so)
3) Make an .exe: I know there are many programs to make .exe from java but they would make a one-platform-based file.
Also there were many hints about using .jar files to get things easier.
Is there a 4th option in which users have to download only a few mbs to use the application?
And about .jar, how should I use it?
Thank you very much for all your help :)

Simply put - the users must download or be supplied the JRE. This must be installed before they can execute your java application.
As to distributing the application itself - You can jar (Java Archive) your classes into a single file.
You could as has been suggested create an EXE, but these generally are very large and tend to severely restrict the range of java technologies able to be used (EG Serialization, RMI, Reflection, class loading, ...)
Java is not intended for little tools that get installed separately - It is intended for larger applications or small applets in which case the download of the JRE is a minor concern.
Note that applets targeting Java 1.1.7 functionality work fine with most old browsers inbuilt JVMs - Your customers browser may not however have an inbuilt JVM and the user will still need to download the JRE to execute a SWING based applets.
Talden

How to get Portal user from a standalone Java application

Hi,
I have a standalone Java application from where I need to fetch the Portal User Information like userid and email id.
I am using the below line of code
iUser = UMFactory.getUserFactory().getUserByLogonID("e017939");
I have included the jar file com.sap.security.api , But it was giving me the below exception
java.lang.NoClassDefFoundError: com/sap/tc/logging/Location
     at com.sap.security.api.UMFactory.<clinit>(UMFactory.java:55)
     at com.am.wcas.java.mailscheduler.kmaccess.FetchDataFromKM.getiUser(FetchDataFromKM.java:29)
     at com.am.ScheduleEmails.main(ScheduleEmails.java:89)
and I am getting a pop Up message from the Java Virtual Machine Launcher, saying a Fatal Exception has occured and the Program will exit.
Then I went throught he SDN threads and they asked me to include the
logging.jar and com.sap.security.perm.api .
I Included them, then also, it is giving me Exception
java.lang.NoClassDefFoundError: com/sap/engine/lib/logging/LoggingHelper
     at com.sap.security.api.UMFactory.<clinit>(UMFactory.java:56)
     at com.am.FetchKMData.main(FetchKMData.java:30)
Exception in thread "main"
and I am getting a pop Up message from the Java Virtual Machine Launcher, saying a Fatal Exception has occured and the Program will exit.
Kindly let me know if it is possible to access the User info using UMFactory in a standalone Java application. If yes kindly let me know where i am going wrong.
Regards,
Shilpa B.V

Hi Shilpa,
1. Check that you have added com.sap.security.api within the Your Project>Libraries folder (under navigation tab) and also added jars in the build path of the Your Project under project>properties>Build Path.
2. In case you have a DC instead of Web Dynpro Project then you have to add the com.sap.security.api under Your DC>Used DCs and have compile time and runtime dependency added.
Here java.lang.NoClassDefFoundError is caused basically due to only build time dependency added and reference to the jar missing at runtime. Rest the code to retrieve the current user id using UME API and getUserByLogOnID("....") method with/without portal environment would not be an issue at all.
Regards,
Tushar SInha

Web Application and Java Application

Hello,
I have a standalone Java application and a web application (JSP/Servlets) that I would like integrate. The standalone app. should send some information to my web app (which is not a problem), but then the user can be at this web app. for a while and then once he sees something he likes here, he can select it which should take him BACK to the standalone application. My question is whether something like this is possible?
If so, then how do i do it.
Also the web app and the standalone app run to 2 separate machines and 2 different JVM's.
Any kind of help will be great.
Thanks

Well let me describe the scenario in detail
We have a standalone java application that is good to search for data across an enterprise database. We also have another application which is web based and uses jsp's and servlets and is good for displaying data in different ways, let's say different kind of graps. Now the user will typically search for something using the standalone application and once he finds what he is looking for, then he might say that he wants to graph the selected data using this web application. Now this part is not too difficult as the standalone app can simply POST the selected information to the web app and the web app can then plot the graph. However, the tricky part is that this web application has the capability to allow the user to select let's say a bar and then get additional info. on that bar. Now to get this additional info. the web app. must contact the standalone app and tell it what bar was selected to get the additional info.
so my concern is how does the web app contact the standalone app. or even KNOW about this web app. Also, RMI is pretty flaky and i would much rather use web services to accomplish it. If that is the only way to go that is.
Hope that helps.

Help please! Java application and web application...

Hi,
I have a problem with inserting a java application (Main.java) in a web application(index.jsp).
I found a source demo of a drag and drop application on the Internet, but now I want to
have the drag and drop application work in a Jpanel/JFrame in a webapplication.
The drag and drop application code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.border.*;
public class Main {
    public static void main(final String[] args) {
        final ButtonGroup grp = new ButtonGroup();
        final JPanel palette = new JPanel(new FlowLayout(FlowLayout.LEFT));
        palette.setBorder(BorderFactory.createTitledBorder("Palette"));
        final MainPanel mainPanel = new MainPanel();
        mainPanel.setPalette(palette);
        for(int j=0; j<4; j++){
            final JToggleButton btn = new JToggleButton("Panel "+(j+1));
            palette.add(btn);
            grp.add(btn);
            btn.addActionListener(new ActionListener() {
                public void actionPerformed(ActionEvent e) {
                    mainPanel.setAdding(btn.getText());
        final JFrame f = new JFrame("Drag and drop panels");
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.getContentPane().add(palette, BorderLayout.WEST);
        f.getContentPane().add(mainPanel, BorderLayout.CENTER);
        f.setSize(800, 600);
        f.setVisible(true);
class MainPanel extends JPanel implements MouseListener, MouseMotionListener {
    private JPanel palette;
    private String adding="";
    private SubPanel hitPanel;
    private int deltaX, deltaY, oldX, oldY;
    private final int TOL = 4; //tolerance
    public MainPanel() {
        setLayout(null);
        addMouseListener(this);
        addMouseMotionListener(this);
    public void mousePressed(final MouseEvent e) {
        if( adding != "" ){
            setCursor(new Cursor(Cursor.DEFAULT_CURSOR));
            SubPanel sub = new SubPanel(adding);
            add(sub);
            sub.setSize(sub.getPreferredSize());
            sub.setLocation((int)e.getX(),(int)e.getY());
            revalidate();
            adding = "";
            return;
        Component c = getComponentAt(e.getPoint());
        if (c instanceof SubPanel) {
            hitPanel = (SubPanel) c;
            oldX = hitPanel.getX();
            oldY = hitPanel.getY();
            deltaX = e.getX() - oldX;
            deltaY = e.getY() - oldY;
            if( oldX < e.getX()-TOL ) oldX += hitPanel.getWidth();
            if( oldY < e.getY()-TOL ) oldY += hitPanel.getHeight();
    public void mouseDragged(final MouseEvent e) {
        if (hitPanel != null) {
            int xH = hitPanel.getX();
            int yH = hitPanel.getY();
            int xDiff = e.getX()-oldX;
            int yDiff = e.getY()-oldY;
            int cursorType = hitPanel.getCursor().getType();
            if( cursorType == Cursor.W_RESIZE_CURSOR){           //West resizing
                hitPanel.setBounds( e.getX(), yH, hitPanel.getWidth() - xDiff, hitPanel.getHeight() );
            }else if( cursorType == Cursor.N_RESIZE_CURSOR){     //North resizing
                hitPanel.setBounds( xH, e.getY(), hitPanel.getWidth(), hitPanel.getHeight() - yDiff );
            }else if( cursorType == Cursor.S_RESIZE_CURSOR){     //South resizing
                hitPanel.setSize( hitPanel.getWidth(), hitPanel.getHeight() + yDiff );
            }else if( cursorType == Cursor.E_RESIZE_CURSOR){     //East resizing
                hitPanel.setSize( hitPanel.getWidth() + xDiff, hitPanel.getHeight() );
            }else if( cursorType == Cursor.NW_RESIZE_CURSOR){     //NorthWest resizing
                hitPanel.setBounds( e.getX(), e.getY(), hitPanel.getWidth() - xDiff, hitPanel.getHeight() - yDiff );
            }else if( cursorType == Cursor.NE_RESIZE_CURSOR){     //NorthEast resizing
                hitPanel.setBounds( xH, e.getY(), hitPanel.getWidth() + xDiff, hitPanel.getHeight() - yDiff );
            }else if( cursorType == Cursor.SW_RESIZE_CURSOR){     //SouthWest resizing
                hitPanel.setBounds( e.getX(), yH, hitPanel.getWidth() - xDiff, hitPanel.getHeight() + yDiff );
            }else if( cursorType == Cursor.SE_RESIZE_CURSOR){     //SouthEast resizing
                hitPanel.setBounds( xH, yH, hitPanel.getWidth() + xDiff, hitPanel.getHeight() + yDiff );
            }else{      //moving subpanel
                hitPanel.setLocation( e.getX()-deltaX, e.getY()-deltaY );
            oldX = e.getX();
            oldY = e.getY();
    public void mouseMoved(final MouseEvent e) {
        Component c = getComponentAt(e.getPoint());
        if (c instanceof SubPanel) {
            int x = e.getX();
            int y = e.getY();
            int xC = c.getX();
            int yC = c.getY();
            int w = c.getWidth();
            int h = c.getHeight();
            if(       y >= yC-TOL   && y <= yC+TOL && x >= xC-TOL   && x <= xC+TOL ){
                c.setCursor(new Cursor(Cursor.NW_RESIZE_CURSOR));
            }else if( y >= yC-TOL   && y <= yC+TOL && x >= xC-TOL+w && x <= xC+TOL+w ){
                c.setCursor(new Cursor(Cursor.NE_RESIZE_CURSOR));
            }else if( y >= yC-TOL+h && y <= yC+TOL+h && x >= xC-TOL   && x <= xC+TOL ){
                c.setCursor(new Cursor(Cursor.SW_RESIZE_CURSOR));
            }else if( y >= yC-TOL+h && y <= yC+TOL+h && x >= xC-TOL+w && x <= xC+TOL+w ){
                c.setCursor(new Cursor(Cursor.SE_RESIZE_CURSOR));
            }else if( x >= xC-TOL   && x <= xC+TOL ){
                c.setCursor(new Cursor(Cursor.W_RESIZE_CURSOR));
            }else if( y >= yC-TOL   && y <= yC+TOL ){
                c.setCursor(new Cursor(Cursor.N_RESIZE_CURSOR));
            }else if( x >= xC-TOL+w && x <= xC+TOL+w ){
                c.setCursor(new Cursor(Cursor.E_RESIZE_CURSOR));
            }else if( y >= yC-TOL+h && y <= yC+TOL+h ){
                c.setCursor(new Cursor(Cursor.S_RESIZE_CURSOR));
            }else{
                c.setCursor(new Cursor(Cursor.MOVE_CURSOR));
    public void mouseReleased(final MouseEvent e) { hitPanel = null; }
    public void mouseClicked(final MouseEvent e) {}
    public void mouseEntered(final MouseEvent e) {}
    public void mouseExited(final MouseEvent e) {}
    public void setAdding(final String string) {
        adding = string;
        setCursor(new Cursor(Cursor.HAND_CURSOR));
    public void setPalette(final JPanel panel) { palette = panel; }
class SubPanel extends JPanel {
    public SubPanel(final String name) {
        setPreferredSize(new Dimension(100, 100));
        setBorder(new TitledBorder(new LineBorder(Color.BLACK), name));
}This application works with JFrame, but I want to display the JFrame in a webapplication (JSP Page).
I'm using Netbeans 6.0 (GlassFish) to create webapplication using Visual Web JavaServer Faces.
So in summary:
How can i display the drag and drop application into a JFrame (better in a JPanel) in a webapplication (index.jsp)??
Hope you can help...
Thanks in advance...
Greetings,
Rajsh

So have an applet that opens a JFrame... JSP or not has nothing to do with it, since it's nothing but HTML the client gets.
You can't have a JFrame embedded in an HTML page. And if you could have an applet but don't know how to get that copied code to fit inside (I mean, content pane is content pane), you might want to consider learning how to do that.

Java Application has trouble

Similar Messages

Maybe you are looking for