Java.exe - Application error. memory cannot be "read".

Hi
I am facing this problem in a production server. This error happens once in a while.
java.exe - Application error. The instruction at "0x0803de14" referenced memory at "0x00000000".The memory cannot be "read".
I am using WL 8.1.4, JDK 1.4.2_08. Server is Windows Server 2003R2 (we have tried with Windows 2003 also).
LAst week, in fact, we have reformatted the production server and reinstall the software and deploy again but still same results.
I have created the WL domains on another app server (but still pointing to the same DB) but still having the problem.
Any one got any clue. Many thanks.
Edited by yewloon at 05/30/2007 12:36 AM

how many instances do you have ? what are you trying to deploy (war,jar or ear)? how do you access the application ?, I mean do you go through any webserver ?, have you configured the webserver plugin correctly ?

Similar Messages

Java.exe - Application error. The instruction at "0x504c42b8" referenced memory at "0x00000009".The memory cannot be "read".

Our production application is experiencing the following error with increasing
frequency.
Windows 2000 Dialog Box:
java.exe - Application error.
The instruction at "0x504c42b8" referenced memory at "0x00000009".The memory cannot
be "read".
Click on OK to terminate program.
Does anybody know the cause and solution to this problem?
We're using WL 5.1.0 sp11 jvm version 1.2.2_007
However, searching the web indicates the error message occurs with a variety of
configurations.
[javaError.gif]

John Slaman wrote:
>
Our production application is experiencing the following error with
increasing frequency.
Windows 2000 Dialog Box:
java.exe - Application error.
The instruction at "0x504c42b8" referenced memory at "0x00000009".The
memory cannot be "read".
Click on OK to terminate program.
Does anybody know the cause and solution to this problem?
We're using WL 5.1.0 sp11 jvm version 1.2.2_007
However, searching the web indicates the error message occurs with a
variety of configurations.I believe this is a memory flaws problem, cannot read memory can be in 2
ways: either the address has been allocated (reserved) by some other
resources or the address specified is not valid (phantom lookup).
Try to get a higher version of WLS.
Thanks,
Neo Gigs
"Follow the white rabbit..."

Java.exe-Application Error

Hi,
There is a runtime error
java.exe - application error - the
instruction at "0x5006f60a" referenced memory at "0x08f20528". The memory
could not be "written"
The application was performing well, but now there is an runtime error which gives the above statement.
I re-installed the java.exe , but the same error exists.
Is there any solution for it.?
Kindly help.
Regards,
vidhya

Windows, eh? Ask Bill if he can resolve it.
***Annie***

Jav.exe - application error

The software I am using needs to run a Java virtual machine, and requires jre1.2.2. However when it tries to launch java I get the following error
Java.exe application error
The instruction at "0x500bf874" referenced memory at "0x00000e7f". The memory could not be "read"
Click OK to terminate
CLick on cancel to deug.
Any ideas what is causing this?

What OS are you using?
What exact version of the JRE 1.2.2 are you using?
I remember this error with Win2000 and an old 1.2.2 jre. Try to download the latest one (1.2.2_013).
http://java.sun.com/products/jdk/1.2/download.html
hope this help.

JFileChooser causes "java.exe - Application Error"

Hi,
When I'm closing an JFileChooser dialog (by e.g. pressing ok or cancel) a second or so later my JVM terminates with the error message "java.exe - Application Error. The instruction at "0*6d0ea46e" referenced a memory at "0x00000000". The memory could not be "read". Click on OK to treminate the program".
I turned on verbose output from the JVM and the last printout was:
[Loaded javax.swing.Autoscroller from C:\Program Files\Java\jdk1.5.0\jre\lib\rt.jar]
[Dynamic-linking native method sun.awt.windows.WComponentPeer.removeNativeDropTarget ... JNI]
result 1
[Dynamic-linking native method sun.awt.windows.WFramePeer.getState ... JNI]
[Loaded java.awt.EventDispatchThread$StopDispatchEvent from C:\Program Files\Java\jdk1.5.0\jre\lib\rt.jar]
[Dynamic-linking native method sun.awt.windows.WToolkit.shutdown ... JNI]
No exception is shown.
I have uninstall all old JVMs and reinstalled JDK 5.0. This does not help.
This simple program causes the termination of the JVM:
public static void main(String[] args) {
System.out.println("0");
JFileChooser fileChooser = new JFileChooser();
System.out.println("1");
int result = -2;
try {
result = fileChooser.showOpenDialog(null);
} catch (HeadlessException e1) {
e1.printStackTrace();
System.out.println("result " + result);
try {
Thread.sleep(5000);
} catch (InterruptedException e) {
// TODO Auto-generated catch block
e.printStackTrace();
System.out.println("2");
I receive the printout "result" but not "2".
I appriciate any help!
BR
/Marcus

No, this is very bad. Any time you see a message like this mentioning a memory address, it means that java, not you, has crashed. There's no way for you to fix this. The only thing you can try is to work around it.
My suggestions:
1. Report it to Sun. Make sure you include your system info (processor, memory, computer manufacturer) and what version of java you're using
2. Try downloading and installing a different version of java

I get firefox.exe Application Error memory could ot be read, instruction 0x10008d37.

When I first open firefox, a window opens in the center of the screen. The title of the window is firefox.exe-Application Error there is a red circle with a white x on the left side of the box. Written in the box is: The instruction at 0x10008d37 referenced memory at 0xfffffff. The memory could not be read. then it gives two choices. Click on ok to terminate the program or Click on cancel to debug the program. Cancel and ok shuts down firefox. If you move the box out of the way, you can use firefox to surf the net.

Thanks for the advice. I am afraid I may have bigger issues than my initial problem. I have not been able to load Firefox 8. It will go through the initial steps, then stop, without completing the update. I will try again after i figure out how to get 8 loaded.

9cc: MsiExec.exe Application Error Memory Could Not Be Written on Install

During installation the following error occurs:
9cc: MsiExec.exe - Application Error
The instruction at "0x3ff084a2" referenced memory at "0x00000000". The memory could not be written.
Screenshot:
http://img196.imageshack.us/img196/724/qterror.jpg
I followed the instructions here:
http://support.apple.com/kb/HT1926
Completely removed and cleaned up Quicktime and tried a reinstall, and it does the same thing.
The install completes, but then Quicktime does not funciton.

You probably just have a old msi file from a previous QT installation that needs to be removed.
I'd remove QT again from the add\remove control panel. Then do a search of the computer and remove any left over files or folders that the uninstall didn't get, including QuickTime qts and QuickTimeVR qtx from C:\WINDOWS\system32.
Then run this program to remove any old QT installer information and give it another try.
http://support.microsoft.com/kb/290301/

Explorer.exe application error "Memory could not be written" ?! OS seems stuck now

(Model # m6-k010dx) My new laptop after 13 months automatically updated from windows 8 to 8.1 after I had said 'no' as many times as it allowed. After the update my files are still on it and most things are there but it seems 'stuck' and the orange screen keeps flickering like start to desktop so fast you usually can't even click anything in time to open it before it switches. I was told that the drivers probably needed to be updated first (eventhough I am pretty sure I kept up with all my other updates that popped up the only one I postponed was 8.1) and that I should refresh it, so I lose my programs but keep my files. I'm so sad I now lost Photoshop cs6 and my prefered antivirus (webroot) But anyway back to 8.0, it functioned fine aside from annoying pop ups to install norton antivirus no thank you, i bought webroot again. no updates were available.
I went to HP.com drivers update, searched for my pc and its correct update, and next thing I know is it's installing windows 8.1....??!
So again when it's 'done' and reboots, the screens flicker forever. I shut down, restart, same. so I put it back to windows 8...it will install 8.1 on its own any day now.. Please help asap!!!
Also forgot to mention when the screens are flickering, a few explorer exe application errors pop up on occaision. IE: "the instruction at 0xaa0c663c referenced memory at 0xaa0c663c. The memory could not be written. Click ok to terminate the program." was one the last time,
and the time before it, the initial windows 8.1 update when I still had Webroot antivirus, the pop up said "the instruction at 0x9b63663c referenced memory at 0x9b63663c. The memory could not be written. Click ok to terminate the program." the other pop ups the initial time came from Webroot - IE: "This file is trying to install itself to start every time the computer turns on C: /Windows/system32/DrvInst (dot) exe" and gives the options to block, allow once, or allow always.
Another trying to install every time computer starts is "C: /WINDOWS/system32/wbem/WMIADAP (dot) EXE"
and another is : "Process ID: 4244
Thread ID: 3460
Event Type: Registry
Access: Write
Registry Key: /REGISTRY/MACHINE/SYSTEM/ControlSet001/Services/NDIS/IfTypes/131
Value: IfUsedNetLuidIndices"
I searched all of those but found nothing. How can I have a smooth update? THank you in advance

Hi @ASAP666 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP ENVY m6-k010dx Sleekbook and trying to update to Windows 8.1. Before updating did you make sure your system was up to date with Windows. Here is something from Microsoft that might help.
Looking into this I have found that it is a driver issue usually associated with USB devices.
Please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues.
Plug the power adapter directly into a functioning wall outlet. Do not plug it into a power strip, surge protector, or secondary power source as this could cause and issue.
I recommend to do this update to disable your Anti Virus or Webroot temporarily to allow the update to go through.
Please let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Java.exe application error - the memory could not be read

Hi all,
I have some problems. I have been getting this error:
The instruction at "0x03491c33" referenced memory at "0x034c1f77". The memory could not be "read".
This error occurs when the disconnect function() is called.
My code is as follows:
JNIEXPORT void JNICALL Java_JFrame_disconnect (JNIEnv * env, jobject obj) {
::CoInitialize(NULL);
HINSTANCE getprocDLL = LoadLibrary(TEXT("test.dll"));
if (getprocDLL != NULL){
typedef void (_cdecl*pICFUNC)(void);
pICFUNC disconnect;
FARPROC getProcessID = (FARPROC)GetProcAddress(HMODULE(getprocDLL),"Disconnect");
disconnect = pICFUNC (getProcessID);
disconnect() <---- error occurs when this function is called
FreeLibrary(getprocDLL);
::CoUninitialize();
Any idea what could be the possible problem with the code?
Any help / suggestions would be greatly appreciated! Thanks in advance!
Edited by: dolphlam on Sep 4, 2008 12:41 AM

1. Check what value getProcessID has.
2. Verify that the signature of the method that you are casting it to is correct.
3. Can you call disconnect without actually connecting to something?
4. Move the code out of JNI entirely. Create a C/C++ executable and verify that the code works there first.

Itunes.exe - Application error ..... memory cannot be read

Using version 10.3.1.55 (although the problem has existed in previous version for a few months now)
After using the computer for a few hours - when I close it down I get a box saying:-
iTunes:iTunes.exe - Application Error
The instruction at 0x64761602 referenced memory at 0x06294238. The memory could not be read.
Click OK to terminate the program.
This often happens after Shockwave has crashed in CHROME - but has also happened without Shockwave crashing.

how many instances do you have ? what are you trying to deploy (war,jar or ear)? how do you access the application ?, I mean do you go through any webserver ?, have you configured the webserver plugin correctly ?

Why do I get the Application Error jqsnotify.exe-Application Error. The memory could not be read?

Why do I get this error message every time i opened up Firefox saying: jqsnotify.exe-Application Error and then at the bottom line it says: The instruction at "0x5ff3d322"referenced memory at " 0xe41203c3". The memory could not be "read". Click on OK to terminate the program.
== This happened ==
Every time Firefox opened
== I recently renewed and installed the CA Security Suite and un-installed Firefox and re-installed it again.

System restore did it for me........!!!! It's gone and I don't miss it one bit.....!!!! May be one of those untraceable tricks that hackers use to irritate people.....Some security programs can identify these things ,but the perps usually use bogus addresses to send them anyway...Cyber criminals SUCK....<u>That is right ,I said that....</u> and they should be jailed and fined and suspended from internet usage all over the globe....
Reverend K.
CEO,FOUNDER,Site Editor,
http://WWW.CCCINTL.NET

RWRBE60.EXE - Application Error. The memory could not be "read" - URGENT !

Hi,
We are getting the error "RWRBE60.EXE - Application Error. The memory could not be written" in some of the machines. That too, this error is encountered only some times and not always.
Scenario: The report builder generates a .RTF file and places it in the network path. The report is called from the forms 6i. We are using the Report Builder - 6.0.8.25.0.
This error is encountered only in some machines but not always.
It's a critical release issue. Could any let us know the possible solution?
Thanks,
Monica

Thanks. We can not re-install the report builder now. How do I check whether memory is sufficient or not?

We installed the Acrobat Reader 11.0.09 on Citrix enable Windows 2008 server a month ago , it was working. starting from this weeke we are receiveing error mesaage AcroRD32.exe - application error (Instruction at 0x...bad8 bad referenced memory at

We installed the Acrobat Reader 11.0.09 on Citrix enable Windows 2008 server a month ago , it was working. starting from this weeke we are receiveing error mesaage AcroRD32.exe - application error (Instruction at 0x...bad8 bad referenced memory at 0x....bad8 The memory could not be written Click ok to terminate the program)
Instruction at 0x...bad8 bad referenced memory at 0x....bad8
The memory could not be written
Click ok to terminate the program

Hi SUBRAMANIAN,
Are you still facing this issue? It seems to be conflict to me.
Are you using any third party plugins with Acrobat? Try disabling and to use it again.
Regards,
Ajlan Huda.

Nimax.exe - Application Error. Instruction at 0x6d8e3e61 referenced memory at 0x00000000. The memory could not be "read."

On startup I get a nimax.exe application error.
The instruction at "0x1ce30df7" referenced memory at "0x00000000". The memory could not be "read".
This happens every time I start the computer, run a vi with the initialize.vi or try to use the measurement and automation explorer.
I am running windows XP, Labview 7.1, and max 3.1.1

I had a similar problem in win2000 / max 3.1.1. I do not recall the exact memory location error.
It happened every time I started the computer, or once started, evrytime I load a vi that has some daqmx functionlity.
I reinstalled windows / Nidaq, and never had the error again.

Firefox.exe-application error: Found 0 results for the instruction at "0x00b48d37" reference memory at "0x00bd37". the memory could not be "read".

my firefox does not work because of this error.
firefox.exe-application error: Found 0 results for the instruction at "0x00b48d37" reference memory at "0x00bd37". the memory could not be "read".

Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
Uninstall your current Firefox version if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
See also:
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Java.exe - Application error. memory cannot be "read".

Similar Messages

Maybe you are looking for