Java.lang.RuntimeException: Uncompilable source code - missing method body
Hi,
I am getting the following error at runtime
java.lang.RuntimeException: Uncompilable source code - missing method body, or declare abstractwhen I try to instantiate a class using reflexion as following:
MyInstance = MyClass.newInstance(); I have tried to find some explanation using Google, but could not find any that fit my case. MyClass's implementation has a public constructor with no parameter. There is no error at compile time when cleaning and building all code.
Anyone has tips about what could cause this error?
Thanks.
Jrm wrote:
It is not my code originally... You are making far too many unchecked assumptions about the reality of this situation to even get close to what that reality it is... Get over patronizing, it would improve your social/people skills... Thanks !It is your own problem that you perceive something as patronizing, while in fact it was only an honest and straight to the point attempt to help you. This forum does not deal in sensitivity, it gets in the way of helping people to see the error of their ways.
Similar Messages
-
Hi,
I am trying to abort a composite instance from SOA BPM Worklist.
I was able to do the same using weblogic 10.3.6 and SOA 11.1.1.6
Now, I am using weblogic 10.3.6 (same server) and SOA 11.1.1.7 . I have done the complete FacadeFinderBean and SOATestBean JNDI setup on my servers.
I am getting the below error now.
Caused by: An error occurred while aborting or purging composite instance.
Caused by: java.rmi.RemoteException: EJB Exception: ; nested exception is:
java.lang.RuntimeException: Caller doesn't have enough permission to call this method.
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:237)
at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:223)
at oracle.soa.management.internal.ejb.impl.FacadeFinderBean_4vacyo_FacadeFinderBeanImpl_1036_WLStub.getCompositeInstances(Unknown Source)
at oracle.soa.management.internal.ejb.EJBLocatorImpl.getCompositeInstances(EJBLocatorImpl.java:401)
Caused by: java.lang.RuntimeException: Caller doesn't have enough permission to call this method.
at oracle.soa.management.internal.ejb.impl.BaseSOABeanImpl.checkSecurityRole(BaseSOABeanImpl.java:55)
at oracle.soa.management.internal.ejb.impl.FacadeFinderBeanImpl.getCompositeInstances(FacadeFinderBeanImpl.java:913)
at oracle.soa.management.internal.ejb.impl.FacadeFinderBeanImpl.getCompositeInstances(FacadeFinderBeanImpl.java:905)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
Please provide your valuable inputs to solve the issue.
Thanks and Regards,
VijayHi,
I was able to solve the issue by a workaround >>>
Set the facade.security.check system property to false in setDomainEnv.sh on SOA domain under java_options
-Dfacade.security.check=false
Regards,
Vijay -
Hi All,
I am getting the exception "Exception: java.lang.RuntimeException: Caller doesn't have enough permission to call this method.", when i try to execute the code "Composite MFTComposite = (Composite)locator.lookupComposite(compositeNameRevision); ".Below mentioned the sample code , i am using this code for getting the running instances.
try{
String componentInstanceID = new Long(getInstanceId()).toString();
addAuditTrailEntry("Component Instance ID is "+componentInstanceID);
Locator locator = LocatorFactory.createLocator();
addAuditTrailEntry("Created locator..");
String compositeRevision = (String)getVariableData("compositeRevision");
addAuditTrailEntry("compositeRevision..1111"+compositeRevision);
String compositeNameRevision = "ManagedFileTransfer/MFT!" + compositeRevision;
Composite MFTComposite = (Composite)locator.lookupComposite(compositeNameRevision);
addAuditTrailEntry("MFT Composite lookup complete..setting filter");
CompositeInstanceFilter filter = new CompositeInstanceFilter();
filter.setState(CompositeInstance.STATE_RUNNING);
filter.setTitle((String) getVariableData("transferName"));
List<CompositeInstance> instances = MFTComposite.getInstances(filter);
StringBuffer message = new StringBuffer();
if ((instances != null) && (instances.size() > 1)) {
addAuditTrailEntry("currently running MFT Instances..");
for (CompositeInstance instance : instances) {
message.append("Instance: " + instance.getId() + " Creation date: " + instance.getCreationDate() + ",");
addAuditTrailEntry("Instance: " + instance.getId() +
" creation-date: " + instance.getCreationDate());
setVariableData("runningInstance", message.toString());
} catch (Exception ex) {
setVariableData("runningInstance", ex.getMessage());
addAuditTrailEntry("Exception: " + ex);
Appreaciate your quick response.
Thank You,
Vamsi.PHi Vamsi.P,
Try something like below... Using weblogic admin credentials...
Hashtable props = new Hashtable();
props.put(Context.SECURITY_PRINCIPAL, "fred");
props.put(Context.SECURITY_CREDENTIALS, "seafood");
Locator locator = LocatorFactory.createLocator(props);
Cheers,
Vlad -
Can Any one help me in finding the cause of following error
16:18:27,565 INFO [PipelineManager] DEBUG Cancel Link Transaction
16:18:27,565 INFO [PipelineManager] DEBUG Transaction is TX_MANDATORY
16:18:27,565 INFO [PipelineManager] DEBUG Setting transaction to rollback
16:18:27,565 INFO [PipelineManager] DEBUG Cancel Chain Transaction
16:18:27,565 INFO [PipelineManager] DEBUG Transaction is TX_REQUIRED
16:18:27,565 INFO [PipelineManager] DEBUG Setting transaction to rollback
16:18:27,565 ERROR [OrderManager]
CAUGHT AT:
CONTAINER:atg.service.pipeline.RunProcessException: An exception was thrown from the context of the link named [loadCommerceItemObjects].; SOURCE:java.lang.RuntimeException: CONTAINER:atg.repository.RepositoryException; SOURCE:org.jboss.util.NestedSQLException: Transaction is not active: tx=TransactionImple < ac, BasicAction: -53eaeff2:f142:52c29876:2a4f status: ActionStatus.ABORT_ONLY >; - nested throwable: (ja
at atg.service.pipeline.PipelineChain.runProcess(PipelineChain.java:393)
at atg.service.pipeline.PipelineChainContext.runProcess(PipelineChainContext.java:207)
at atg.service.pipeline.PipelineManager.runProcess(PipelineManager.java:475)
at atg.commerce.pipeline.CommercePipelineManager.runProcess(CommercePipelineManager.java:123)
at atg.commerce.order.OrderImpl.ensureContainers(OrderImpl.java:1745)
at atg.commerce.order.OrderImpl.getShippingGroups(OrderImpl.java:1084)
at com.mk.integration.epicor.salesAudit.datamanager.EpicorSalesAuditDataManager.processShippingGroups(EpicorSalesAuditDataManager.java:477)
at com.mk.integration.epicor.salesAudit.datamanager.EpicorSalesAuditDataManager.constructSalesAuditFeed(EpicorSalesAuditDataManager.java:431)
at com.mk.integration.epicor.salesAudit.datamanager.EpicorSalesAuditDataManager.exportFullfilledOrder(EpicorSalesAuditDataManager.java:213)
at com.mk.integration.epicor.salesAudit.processor.EpicorSalesAuditProcessor.exportFullfilledOrder(EpicorSalesAuditProcessor.java:42)
at com.mk.integration.epicor.salesAudit.scheduler.EpicorSalesAuditScheduler.startSalesAuditExport(EpicorSalesAuditScheduler.java:65)
at com.mk.integration.epicor.salesAudit.scheduler.EpicorSalesAuditScheduler.doScheduledTask(EpicorSalesAuditScheduler.java:49)
at atg.service.scheduler.SingletonSchedulableService.performScheduledTask(SingletonSchedulableService.java:253)
at atg.service.scheduler.ScheduledJob.runJobs(ScheduledJob.java:466)
at atg.service.scheduler.Scheduler$2handler.run(Scheduler.java:782)
Caused by: java.lang.RuntimeException: CONTAINER:atg.repository.RepositoryException; SOURCE:org.jboss.util.NestedSQLException: Transaction is not active: tx=TransactionImple < ac, BasicAction: -53eaeff2:f142:52c29876:2a4f status: ActionStatus.ABORT_ONLY >; - nested throwable: (javax.resource.ResourceException: Transaction is not active: tx=TransactionImple < ac, BasicAction: -53eaeff2:f142:52c29876:2a4f status:
at atg.adapter.gsa.GSAItemDescriptor.loadProperty(GSAItemDescriptor.java:5994)
at atg.adapter.gsa.GSAItem.getPersistentPropertyValue(GSAItem.java:1315)
at atg.adapter.gsa.GSAItem.getPropertyValue(GSAItem.java:1208)
at atg.adapter.gsa.GSAItem.getPropertyValue(GSAItem.java:1405)
at atg.repository.RepositoryItemImpl.getPropertyValue(RepositoryItemImpl.java:151)Hi,
I seems like you don't have any active transaction. Try start or get transaction before execute your required operations.
After it, commit (or rollback, if something wrong happens) the transaction.
Hope it helps. -
Debugger stopped on uncompilable source code.
Dear Friends,
I got the Error as like
Debugger stopped on uncompilable source code.
The code is down!!!
I could not figure out the reason, why it comes. !!! I read data from a txt file and generate an XML file.
please any 1 help me to solve this
Priya
package java.Associations;
import java.io.*;
import java.util.ArrayList;
import java.util.Iterator;
import java.util.List;
import java.util.Scanner;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.parsers.ParserConfigurationException;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
import org.w3c.dom.Text;
import com.sun.org.apache.xml.internal.serialize.OutputFormat;
import com.sun.org.apache.xml.internal.serialize.XMLSerializer;
public class XMLCreatorExample {
//No generics
List myData;
Document dom;
public XMLCreatorExample() {
//create a list to hold the data
myData = new ArrayList();
//initialize the list
loadData();
//Get a DOM object
createDocument();
public void runExample(){
System.out.println("Started .. ");
createDOMTree();
printToFile();
System.out.println("Generated file successfully.");
* Add a list of books to the list
* In a production system you might populate the list from a DB
private void loadData(){
Scanner inputFile = null;
try {
inputFile = new Scanner(new File("C:\\coding\\weka\\1.txt"));
while(inputFile.hasNext()) {
myData.add(inputFile.next());
catch(FileNotFoundException fNFE) {
System.out.println("The file was not found");
finally {
inputFile.close();
//myData.add(new Book("Head First Java", "Kathy Sierra .. etc","Java 1.5"));
//myData.add(new Book("Head First Design Patterns", "Kathy Sierra .. etc","Java Architect"));
* Using JAXP in implementation independent manner create a document object
* using which we create a xml tree in memory
private void createDocument() {
//get an instance of factory
DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance();
try {
//get an instance of builder
DocumentBuilder db = dbf.newDocumentBuilder();
//create an instance of DOM
dom = db.newDocument();
}catch(ParserConfigurationException pce) {
//dump it
System.out.println("Error while trying to instantiate DocumentBuilder " + pce);
System.exit(1);
* The real workhorse which creates the XML structure
private void createDOMTree(){
//create the root element <Books>
Element rootEle = dom.createElement("Books");
dom.appendChild(rootEle);
//No enhanced for
Iterator it = myData.iterator();
while(it.hasNext()) {
Book b = (Book)it.next();
//For each Book object create <Book> element and attach it to root
Element bookEle = createBookElement(b);
rootEle.appendChild(bookEle);
* Helper method which creates a XML element <Book>
* @param b The book for which we need to create an xml representation
* @return XML element snippet representing a book
private Element createBookElement(Book b){
Element bookEle = dom.createElement("Book");
bookEle.setAttribute("Subject", b.getSubject());
//create author element and author text node and attach it to bookElement
Element authEle = dom.createElement("Author");
Text authText = dom.createTextNode(b.getAuthor());
authEle.appendChild(authText);
bookEle.appendChild(authEle);
//create title element and title text node and attach it to bookElement
Element titleEle = dom.createElement("Title");
Text titleText = dom.createTextNode(b.getTitle());
titleEle.appendChild(titleText);
bookEle.appendChild(titleEle);
return bookEle;
* This method uses Xerces specific classes
* prints the XML document to file.
private void printToFile(){
try
//print
OutputFormat format = new OutputFormat(dom);
format.setIndenting(true);
//to generate output to console use this serializer
//XMLSerializer serializer = new XMLSerializer(System.out, format);
//to generate a file output use fileoutputstream instead of system.out
XMLSerializer serializer = new XMLSerializer(
new FileOutputStream(new File("C:\\coding\\book.xml")), format);
serializer.serialize(dom);
} catch(IOException ie) {
ie.printStackTrace();
public static void main(String args[]) {
//create an instance
XMLCreatorExample xce = new XMLCreatorExample();
//run the example
xce.runExample();/**/
package java.Associations;
public class Book {
private String title;
private String author;
private String subject;
public Book(String subject) {
this.subject = subject;
public Book() {
public Book(String title, String author, String subject) {
this.title = title;
this.author = author;
this.subject = subject;
public String getAuthor() {
return author;
public void setAuthor(String author) {
this.author = author;
public String getTitle() {
return title;
public void setTitle(String title) {
this.title = title;
public String getSubject() {
return subject;
public void setSubject(String subject) {
this.subject = subject;
public String toString() {
StringBuffer sb = new StringBuffer();
sb.append(" { Book Details --");
sb.append("Title:" + getTitle());
sb.append(", ");
sb.append("Author:" + getAuthor());
sb.append(", ");
sb.append("Subject:" + getSubject());
sb.append(". } \n");
return sb.toString();
}One of your .java files doesn't compile (has compilation errors.). Make sure there are no compilation errors before you attempt to run/debug the program.
P.S Why are you posting this across multiple forums? -
IWAB0399E Error in generating Java from WSDL: java.lang.RuntimeException:
Hi,
I did try to create web service client using eclipse. Imported wsdl to eclipse project and tried to create java client but I am getting following exception :
IWAB0399E Error in generating Java from WSDL: java.lang.RuntimeException: Unknown element _value
java.lang.RuntimeException: Unknown element _value
at org.apache.axis.wsdl.toJava.JavaBeanWriter.getBinaryTypeEncoderName(JavaBeanWriter.java:490)
at org.apache.axis.wsdl.toJava.JavaBeanWriter.writeSimpleTypeGetter(JavaBeanWriter.java:928)
at org.apache.axis.wsdl.toJava.JavaBeanWriter.writeAccessMethods(JavaBeanWriter.java:1102)
at org.apache.axis.wsdl.toJava.JavaBeanWriter.writeFileBody(JavaBeanWriter.java:238)
at org.apache.axis.wsdl.toJava.JavaWriter.generate(JavaWriter.java:127)
at org.apache.axis.wsdl.toJava.JavaBeanWriter.generate(JavaBeanWriter.java:1405)
at org.apache.axis.wsdl.toJava.JavaTypeWriter.generate(JavaTypeWriter.java:113)
at org.apache.axis.wsdl.toJava.JavaGeneratorFactory$Writers.generate(JavaGeneratorFactory.java:421)
at org.apache.axis.wsdl.gen.Parser.generateTypes(Parser.java:547)
at org.apache.axis.wsdl.gen.Parser.generate(Parser.java:432)
at org.apache.axis.wsdl.gen.Parser.access$000(Parser.java:45)
at org.apache.axis.wsdl.gen.Parser$WSDLRunnable.run(Parser.java:362)
at java.lang.Thread.run(Unknown Source)
This works just fine in SoapUI. Also can access this from other clients.
You can access the wsdl fine from http://unit7165.oracleads.com:9008/opptyMgmtOpportunities/OpportunityService?wsdl
Does anybody know why this does not work in Eclipse?
Thanks.Hi Team,
I am too getting same exception when trying to create client side code from wsdl.
Below is what I am using :
wsdl link :
https://fap0607-crm.oracleads.com/mklLeads/SalesleadService?wsdl
Tools I used : Apache Axis 1.4 jars and used command - wsdl2java
I guess, it's a bug already reported here :
https:/issues.apache.org/jira/browse/AXIS-1828
Any pointer to this will help.
Regards,
Sumit -
Hi,
I need some help.
Product=weblogic5.1.0
Revision=(Release Level)=
Problem Description=
I am doing cluster of weblogic server, I have no problem to set up the
cluster and to run servlet and EJB examples.
However, on my command line for startcluster I got a lot of message as
followed:
Fri Aug 18 11:31:44 EDT 2000:<E> <MulticastSocket> Multicast socket receive
error: java.lang.RuntimeException: I/O error opening JAR file from
file:/D:/weblogic/mycluster/server86/tmp_deployments/ejbjar-17327.jar
java.util.zip.ZipException: error in opening zip file
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
at weblogic.boot.ServerClassLoader.deploy(ServerClassLoader.java,
Compiled Code)
at
weblogic.cluster.AnnotatedServiceOffer.expandClassPath(AnnotatedServiceOffer
.java, Compiled Code)
at
weblogic.cluster.AnnotatedServiceOffer.readObject(AnnotatedServiceOffer.java
, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
jectInputStreamBase.java, Compiled Co
de)
at
weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
treamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
tStreamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
eamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
treamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readArrayList(WLObjectInput
StreamBase.java, Compiled Code)
at weblogic.cluster.StateDump.readObject(StateDump.java, Compiled
Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
jectInputStreamBase.java, Compiled Co
de)
at
weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
treamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
tStreamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
eamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
treamBase.java, Compiled Code)
at weblogic.cluster.TMSocket.execute(TMSocket.java, Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
Code)
The message freshed about every 20 seconds.
Another question, I used a iplanet web server as a proxy server with a
cluster of two weblogic servers pluged in, although I set
weblogic.properties to round-robin, however, when I run a fibonacci servlet,
it does not do the round-robin. It always go to one machine for a lot of
times. Any idea?
Thank you for your help.
Tom
May i presume that your cluster is configured on a shared file system?.
I have seen this problem only if you cluster is configured on different machines
and if the directory structure is not identical.
let us know..
Kumar
Cameron Purdy wrote:
> First, update to SP4 (or SP5 if it is out now). Second, follow the cluster
> instructions on setting up deployments for a cluster. The only
> implementation that I have used is the single shared location that all the
> servers load from.
>
> --
>
> Cameron Purdy
> http://www.tangosol.com
>
> "Tom Gan" <[email protected]> wrote in message
> news:[email protected]...
> > Hi,
> > I need some help.
> >
> > Product=weblogic5.1.0
> > Revision=(Release Level)=
> > Problem Description=
> > I am doing cluster of weblogic server, I have no problem to set up the
> > cluster and to run servlet and EJB examples.
> > However, on my command line for startcluster I got a lot of message as
> > followed:
> > Fri Aug 18 11:31:44 EDT 2000:<E> <MulticastSocket> Multicast socket
> receive
> > error: java.lang.RuntimeException: I/O error opening JAR file from
> > file:/D:/weblogic/mycluster/server86/tmp_deployments/ejbjar-17327.jar
> > java.util.zip.ZipException: error in opening zip file
> > at java.util.zip.ZipFile.open(Native Method)
> > at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
> > at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
> > at weblogic.boot.ServerClassLoader.deploy(ServerClassLoader.java,
> > Compiled Code)
> > at
> >
> weblogic.cluster.AnnotatedServiceOffer.expandClassPath(AnnotatedServiceOffer
> > .java, Compiled Code)
> > at
> >
> weblogic.cluster.AnnotatedServiceOffer.readObject(AnnotatedServiceOffer.java
> > , Compiled Code)
> > at
> >
> weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
> > jectInputStreamBase.java, Compiled Co
> > de)
> > at
> >
> weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
> > treamBase.java, Compiled Code)
> > at
> >
> weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
> > tStreamBase.java, Compiled Code)
> > at
> >
> weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
> > eamBase.java, Compiled Code)
> > at
> >
> weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
> > treamBase.java, Compiled Code)
> > at
> >
> weblogic.common.internal.WLObjectInputStreamBase.readArrayList(WLObjectInput
> > StreamBase.java, Compiled Code)
> > at weblogic.cluster.StateDump.readObject(StateDump.java, Compiled
> > Code)
> > at
> >
> weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
> > jectInputStreamBase.java, Compiled Co
> > de)
> > at
> >
> weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
> > treamBase.java, Compiled Code)
> > at
> >
> weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
> > tStreamBase.java, Compiled Code)
> > at
> >
> weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
> > eamBase.java, Compiled Code)
> > at
> >
> weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
> > treamBase.java, Compiled Code)
> > at weblogic.cluster.TMSocket.execute(TMSocket.java, Compiled Code)
> > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
> > Code)
> >
> > The message freshed about every 20 seconds.
> >
> > Another question, I used a iplanet web server as a proxy server with a
> > cluster of two weblogic servers pluged in, although I set
> > weblogic.properties to round-robin, however, when I run a fibonacci
> servlet,
> > it does not do the round-robin. It always go to one machine for a lot of
> > times. Any idea?
> > Thank you for your help.
> > Tom
> >
> >
> >
-
Hi,
I need some help.
Product=weblogic5.1.0
Revision=(Release Level)=
Problem Description=
I am doing cluster of weblogic server, I have no problem to set up the
cluster and to run servlet and EJB examples.
However, on my command line for startcluster I got a lot of message as
followed:
Fri Aug 18 11:31:44 EDT 2000:<E> <MulticastSocket> Multicast socket receive
error: java.lang.RuntimeException: I/O error ope
ning JAR file from
file:/D:/weblogic/mycluster/server86/tmp_deployments/ejbjar-17327.jar
java.util.zip.ZipException: error in opening zip file
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
at weblogic.boot.ServerClassLoader.deploy(ServerClassLoader.java,
Compiled Code)
at
weblogic.cluster.AnnotatedServiceOffer.expandClassPath(AnnotatedServiceOffer
.java, Compiled Code)
at
weblogic.cluster.AnnotatedServiceOffer.readObject(AnnotatedServiceOffer.java
, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
jectInputStreamBase.java, Compiled Co
de)
at
weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
treamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
tStreamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
eamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
treamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readArrayList(WLObjectInput
StreamBase.java, Compiled Code)
at weblogic.cluster.StateDump.readObject(StateDump.java, Compiled
Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
jectInputStreamBase.java, Compiled Co
de)
at
weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
treamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
tStreamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
eamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
treamBase.java, Compiled Code)
at weblogic.cluster.TMSocket.execute(TMSocket.java, Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
Code)
The message freshed about every 20 seconds.
Another question, I used a iplanet web server as a proxy server with a
cluster of two weblogic servers pluged in, although I set
weblogic.properties to round-robin, however, when I run a fibonacci servlet,
it does not do the round-robin. It always go to one machine for a lot of
times. Any idea?
Thank you for your help.
TomHi,
I need some help.
Product=weblogic5.1.0
Revision=(Release Level)=
Problem Description=
I am doing cluster of weblogic server, I have no problem to set up the
cluster and to run servlet and EJB examples.
However, on my command line for startcluster I got a lot of message as
followed:
Fri Aug 18 11:31:44 EDT 2000:<E> <MulticastSocket> Multicast socket receive
error: java.lang.RuntimeException: I/O error ope
ning JAR file from
file:/D:/weblogic/mycluster/server86/tmp_deployments/ejbjar-17327.jar
java.util.zip.ZipException: error in opening zip file
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
at weblogic.boot.ServerClassLoader.deploy(ServerClassLoader.java,
Compiled Code)
at
weblogic.cluster.AnnotatedServiceOffer.expandClassPath(AnnotatedServiceOffer
.java, Compiled Code)
at
weblogic.cluster.AnnotatedServiceOffer.readObject(AnnotatedServiceOffer.java
, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
jectInputStreamBase.java, Compiled Co
de)
at
weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
treamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
tStreamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
eamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
treamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readArrayList(WLObjectInput
StreamBase.java, Compiled Code)
at weblogic.cluster.StateDump.readObject(StateDump.java, Compiled
Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
jectInputStreamBase.java, Compiled Co
de)
at
weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
treamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
tStreamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
eamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
treamBase.java, Compiled Code)
at weblogic.cluster.TMSocket.execute(TMSocket.java, Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
Code)
The message freshed about every 20 seconds.
Another question, I used a iplanet web server as a proxy server with a
cluster of two weblogic servers pluged in, although I set
weblogic.properties to round-robin, however, when I run a fibonacci servlet,
it does not do the round-robin. It always go to one machine for a lot of
times. Any idea?
Thank you for your help.
Tom -
Java.lang.RuntimeException : I/O error opening JAR file
Hi,
Cluster configuration : 2 NT boxes WLS5.1(SP6). On one m/c weblogic
is installed on drive C:\ and on another m/c weblogic is installed on drive D:\.
i.e. all jars are at two place m/c 1 : c:\weblogic\myserver\*.jar
m/c 2 : d:\weblogic \myserver\*.jar
When servers startup successfully, error is coming :
on the console of m/c 1 :
java.lang.RuntimeException : I/O error opening JAR file from
file:/d:/weblogic/myserver/eb_arn.jar
on the console of m/c 2 :
java.lang.RuntimeException : I/O error opening JAR file from
file:/c:/weblogic/myserver/eb_arn.jar
When both the weblgoic servers are installed on two machines and
on same drive(c:\), this error is not coming.
i.e. all jars are at two place m/c 1 : c:\weblogic\myserver\*.jar
m/c 2 : c:\weblogic \myserver\*.jar
Regards,
Jitendra Kumar.
Jitendra,
This looks like a bug. Please approach support.
- Prasad
Jitendra Kumar wrote:
> Hi,
>
> I'm deploying as per server property, because all servers have got their own myserver
> directory and jars under that.
> primary key class is not a problem at all, because that file is anyway under serverclasses directory.
>
> The problem starts when two weblogic servers on two m/c are installed on different drive(one on 'C:\' dirve
> and another on 'D:\' drive or a unix machine in cluster).
>
> Regards,
> Jitendra Kumar.
>
> Prasad Peddada <[email protected]> wrote:
> >Are you sure that the the primary key class is there in the jar file.
> >
> >Are you deploying as per cluster property? Deploy on all the servers as per server property.
> >
> >
> >- Prasad
> >
> >Jitendra Kumar wrote:
> >
> >> Hi,
> >>
> >> I don't have any problem in deploying beans and all servers have their local jar files.
> >> Today I started solaris server in cluster and that also giving the same error message in console.
> >> Now 2NT and One Solaris m/c running in cluster.
> >>
> >> error message on NT console is :
> >> **************************************************
> >> Sat Nov 04 15:43:14 GMT+05:30 2000:<E> <MulticastSocket> Multicast socket receive error: java.lang.R
> >> untimeException: I/O error opening JAR file from file:/mazaa/weblogic/weblogic/myserver/voter.jar
> >> <ServerClassLoader><W>: com.cot.eis.vl.eb_voter.VoterPK in not in archive java.util.zip.ZipFile@b902
> >> 66be
> >> java.util.zip.ZipException: error in opening zip file
> >> at java.util.zip.ZipFile.open(Native Method)
> >> at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
> >> at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
> >> at weblogic.boot.ServerClassLoader.deploy(ServerClassLoader.java, Compiled Code)
> >> at weblogic.cluster.AnnotatedServiceOffer.expandClassPath(AnnotatedServiceOffer.java, Compil
> >> ed Code)
> >> at weblogic.cluster.AnnotatedServiceOffer.readObject(AnnotatedServiceOffer.java, Compiled Co
> >> de)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLObjectInputStre
> >> amBase.java, Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputStreamBase.jav
> >> a, Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInputStreamBase.j
> >> ava, Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStreamBase.java,
> >> Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputStreamBase.jav
> >> a, Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readArrayList(WLObjectInputStreamBase.ja
> >> va, Compiled Code)
> >> at weblogic.cluster.StateDump.readObject(StateDump.java, Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLObjectInputStre
> >> amBase.java, Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputStreamBase.jav
> >> a, Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInputStreamBase.j
> >> ava, Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStreamBase.java,
> >> Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputStreamBase.jav
> >> a, Compiled Code)
> >> at weblogic.cluster.TMSocket.execute(TMSocket.java, Compiled Code)
> >> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
> >> Sat Nov 04 15:54:24 GMT+05:30 2000:<E> <MulticastSocket> Multicast socket receive error: java.lang.R
> >> untimeException: I/O error opening JAR file from file:/mazaa/weblogic/weblogic/myserver/voter.jar
> >>
> >> error message on Solaris console is :
> >> ******************************************
> >> java.util.zip.ZipException: error in opening zip file
> >> at java.util.zip.ZipFile.open(Native Method)
> >> at java.util.zip.ZipFile.open(Compiled Code)
> >> at java.util.zip.ZipFile.<init>(Compiled Code)
> >> at java.util.zip.ZipFile.<init>(Compiled Code)
> >> at weblogic.boot.ServerClassLoader.deploy(Compiled Code)
> >> at weblogic.cluster.AnnotatedServiceOffer.expandClassPath(Compiled Code)
> >> at weblogic.cluster.AnnotatedServiceOffer.readObject(Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializab
> >> le(Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readLeftover(Compile
> >> d Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(Compi
> >> led Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readObject(Compiled
> >> Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(Compile
> >> d Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readArrayList(Compil
> >> ed Code)
> >> at weblogic.cluster.StateDump.readObject(Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializab
> >> le(Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readLeftover(Compile
> >> d Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(Compi
> >> led Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readObject(Compiled
> >> Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(Compile
> >> d Code)
> >> at weblogic.cluster.TMSocket.execute(Compiled Code)
> >> at weblogic.kernel.ExecuteThread.run(Compiled Code)
> >> Sat Nov 04 15:55:09 GMT+00:00 2000:<E> <MulticastSocket> Multicast socket receiv
> >> e error: java.lang.RuntimeException: I/O error opening JAR file from file:/C:/we
> >> blogic/myserver/eb_arn.jar
> >>
> >> Regards,
> >> Jitendra Kumar
> >>
> >> Prasad Peddada <[email protected]> wrote:
> >> >Do you trouble deploying the app also.
> >> >
> >> >- Prasad
> >> >
> >> >Jitendra Kumar wrote:
> >> >
> >> >> Hi,
> >> >>
> >> >> Cluster configuration : 2 NT boxes WLS5.1(SP6). On one m/c weblogic
> >> >> is installed on drive C:\ and on another m/c weblogic is installed on drive D:\.
> >> >> i.e. all jars are at two place m/c 1 : c:\weblogic\myserver\*.jar
> >> >> m/c 2 : d:\weblogic \myserver\*.jar
> >> >> When servers startup successfully, error is coming :
> >> >>
> >> >> on the console of m/c 1 :
> >> >> java.lang.RuntimeException : I/O error opening JAR file from
> >> >> file:/d:/weblogic/myserver/eb_arn.jar
> >> >>
> >> >> on the console of m/c 2 :
> >> >> java.lang.RuntimeException : I/O error opening JAR file from
> >> >> file:/c:/weblogic/myserver/eb_arn.jar
> >> >>
> >> >> When both the weblgoic servers are installed on two machines and
> >> >> on same drive(c:\), this error is not coming.
> >> >> i.e. all jars are at two place m/c 1 : c:\weblogic\myserver\*.jar
> >> >> m/c 2 : c:\weblogic \myserver\*.jar
> >> >>
> >> >> Regards,
> >> >> Jitendra Kumar.
> >> >
> >
> >--
> >Cheers
> >
> >- Prasad
> >
> >
-
Hi there
Running Oracle Enterpride Edition 8.1.7
including Oracle Http webserver
I'm trying to run a JSP application developed with Jdeveloper
through th http server
Think I have modified alle the .conf files correctly
I get the message :
"Error Message: java.lang.RuntimeException: JSP Registry could not locate runtime property file:ORDERS_ORDERS_PKG_ORDERS_PKGModule.properties"
Any ideas ?
Or can anyone point me to a (proper) document that decribes (correctly and completely) alle the steps that need to be done ?
Many Thanxs
Regards TJ
nullI am also experiancing this problem. I have updated the ojsp to version 112200 and the properties file exist within the .jar used by the .jsp file.
Exception:
java.lang.RuntimeException: java.lang.RuntimeException: JSP Registry could not locate runtime property file:deseweb_DesewebModule.properties
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.(Compiled Code)
at java.lang.Exception.(Compiled Code)
at java.lang.RuntimeException.(RuntimeException.java:47)
at morenet.jsp.JSPApplicationRegistry.registerApplicationFromProperties(JSPApplicationRegistry.java:199)
at morenet.jsp.MorenetWebBeanImpl.internalInitialize(MorenetWebBeanImpl.java:119)
at oracle.jdeveloper.html.WebBeanImpl.initialize(WebBeanImpl.java:56)
at oracle.jdeveloper.html.DataWebBeanImpl.initialize(DataWebBeanImpl.java:395)
at morenet.jsp.MorenetWebBeanImpl.initialize(MorenetWebBeanImpl.java:62)
at apps.deseweb._index._jspService(_index.java:71)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java)
at oracle.jsp.JspServlet.internalService(Compiled Code)
at oracle.jsp.JspServlet.service(JspServlet.java)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:314)
at org.apache.jserv.JServConnection.run(Compiled Code)
at java.lang.Thread.run(Compiled Code) -
Hi,
I am following the tutorial which is given in Tutorial for Oracle WebCenter Developers.pdf i am at step 3 , i am using document library service in my page. BUt when i am running the page, the page get opens and it shows the following error:
Error 500--Internal Server Error java.lang.RuntimeException: javax.servlet.jsp.el.ELException.
the details of the error are shown below:
java.lang.RuntimeException: javax.servlet.jsp.el.ELException: Encountered "\u2019", expected one of [<INTEGER_LITERAL>, <FLOATING_POINT_LITERAL>, <STRING_LITERAL>, "true", "false", "null", "(", "-", "not", "!", "empty", <IDENTIFIER>]
at oracle.adf.share.el.OracleExpressionEvaluatorImpl.evaluateInternal(OracleExpressionEvaluatorImpl.java:85)
at oracle.adf.share.el.OracleExpressionEvaluatorImpl.evaluate(OracleExpressionEvaluatorImpl.java:51)
at oracle.adfinternal.view.faces.model.FacesExpressionEvaluator._evaluate(FacesExpressionEvaluator.java:115)
at oracle.adfinternal.view.faces.model.FacesExpressionEvaluator.evaluate(FacesExpressionEvaluator.java:72)
at oracle.adf.model.binding.DCUtil.elEvaluate(DCUtil.java:788)
at oracle.adf.model.binding.DCBindingContainer.evaluateParameterWithElCheck(DCBindingContainer.java:1403)
at oracle.adf.model.binding.DCBindingContainer.evaluateParameter(DCBindingContainer.java:1452)
at oracle.adf.model.binding.DCParameter.internalEvaluateExpresion(DCParameter.java:183)
at oracle.adf.model.binding.DCParameter.getValue(DCParameter.java:98)
at oracle.adf.controller.internal.binding.DCTaskFlowBinding.initializeParams(DCTaskFlowBinding.java:549)
at oracle.adf.controller.internal.binding.DCTaskFlowBinding.createRegionViewPortContext(DCTaskFlowBinding.java:320)
at oracle.adf.controller.internal.binding.DCTaskFlowBinding.getViewPort(DCTaskFlowBinding.java:281)
at oracle.adf.controller.internal.binding.TaskFlowRegionModel.doProcessBeginRegion(TaskFlowRegionModel.java:129)
at oracle.adf.controller.internal.binding.TaskFlowRegionModel.processBeginRegion(TaskFlowRegionModel.java:90)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:116)
at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3038)
at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2759)
at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.prepareModel(PageLifecycleImpl.java:112)
at oracle.adf.controller.faces.lifecycle.FacesPageLifecycle.prepareModel(FacesPageLifecycle.java:80)
at oracle.adf.controller.v2.lifecycle.Lifecycle$2.execute(Lifecycle.java:137)
at oracle.adfinternal.controller.lifecycle.LifecycleImpl.executePhase(LifecycleImpl.java:192)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.mav$executePhase(ADFPhaseListener.java:21)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.startPageLifecycle(ADFPhaseListener.java:231)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$1.after(ADFPhaseListener.java:267)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:71)
at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.afterPhase(ADFLifecyclePhaseListener.java:53)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:352)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:165)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:85)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:54)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.wls.JpsWlsFilter$1.run(JpsWlsFilter.java:96)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.wls.util.JpsWlsUtil.runJaasMode(JpsWlsUtil.java:146)
at oracle.security.jps.wls.JpsWlsFilter.doFilter(JpsWlsFilter.java:140)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:202)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3588)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2200)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2106)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1428)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.servlet.jsp.el.ELException: Encountered "\u2019", expected one of [<INTEGER_LITERAL>, <FLOATING_POINT_LITERAL>, <STRING_LITERAL>, "true", "false", "null", "(", "-", "not", "!", "empty", <IDENTIFIER>]
at org.apache.commons.el.ExpressionEvaluatorImpl.parseExpressionString(ExpressionEvaluatorImpl.java:320)
at oracle.jsp.el.OracleExpressionEvaluator.parseExpression(Unknown Source)
at oracle.adf.share.el.OracleExpressionEvaluatorImpl.evaluateInternal(OracleExpressionEvaluatorImpl.java:78)
... 64 more
Kindly suggest me.
Thanks.There may be a problem with the encoding of the single quotes in the connectionName and startFolderPath parameters of the task flow binding. I had the same problem when I copied and pasted the values from the pdf version of the tutorial.
Try this:
Select the "Bindings" tab of "MyPage.jspx".
Double click on "taskFlow - doclibdocumentLibrary1"
Replace the single quotes in the values by re-typing them.
The tutorial uses these values:
${’MyTutorialContent’}
${'/Manuals'} -
I'm trying to create a graphical editor with GMF tools. To launch the plugin i used Run configurations, for the plugins i used "plugins selected below only" and pressing "add required plugins" it worked fine but after updating eclipse with help->check for updates I can not run the application and i get this error:
eclipse.buildId=4.4.2.M20150204-1700
java.version=1.8.0_31
java.vendor=Oracle Corporation
BootLoader constants: OS=win32, ARCH=x86_64, WS=win32, NL=fr_FR
Framework arguments: -product org.eclipse.platform.ide
Command-line arguments: -product org.eclipse.platform.ide -data C:\Users\Computer\IT\pfe Master\temp\EclipseModelingProjects\gmf1_filesystem\filesystem app1 -dev file:C:/Users/Computer/IT/pfe Master/temp/EclipseModelingProjects/.metadata/.plugins/org.eclipse.pde.core/filesystem app1/dev.properties -os win32 -ws win32 -arch x86_64 -consoleLog
org.eclipse.osgi
Error
Wed May 13 19:18:59 GMT+01:00 2015
Application error
java.lang.RuntimeException: Application "org.eclipse.ui.ide.workbench" could not be found in the registry. The applications available are: org.eclipse.ant.core.antRunner, org.eclipse.e4.ui.workbench.swt.E4Application, org.eclipse.e4.ui.workbench.swt.GenTopic, org.eclipse.help.base.infocenterApplication, org.eclipse.help.base.helpApplication, org.eclipse.help.base.indexTool, org.eclipse.equinox.app.error.
at org.eclipse.equinox.internal.app.EclipseAppContainer.startDefaultApp(EclipseAppContainer.java:248)
at org.eclipse.equinox.internal.app.MainApplicationLauncher.run(MainApplicationLauncher.java:29)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:134)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:104)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:380)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:235)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:648)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:603)
at org.eclipse.equinox.launcher.Main.run(Main.java:1465)
at org.eclipse.equinox.launcher.Main.main(Main.java:1438)
I will appreciate your help.Hi,
after updating, did you get back to Run configuration and press add required plugin again?
If after update there are modifications, it means that you are not using a Target Platform. I recommend to use one in order to have a stable base against which to work on. See documentation.
Regards, -
Java.lang.RuntimeException: Error while creating embedded frame
hello,
i know about http://forums.sun.com/thread.jspa?messageID=10273756, but this doens't helped.
i got a
java.lang.RuntimeException: Error while creating embedded frame
at sun.plugin.viewer.WNetscapePluginObject.createFrame(Unknown Source)
at sun.plugin.viewer.WNetscapePluginObject.setWindow(Unknown Source)
when starting a complex Java Applet in Firefox (2 + 3). Then the bowser freezes.
Internet Explorer freezes too, but doesn't left anything in the console.
Simple applets like http://www.java.com/en/download/help/testvm.xml works fine, but i doesn't know the special thing on my applet that keeps it from running.
The best thing about it is ... this happens only on some computers, on most systems the applet works as aspected.
i have no idea, where i should start to search to solve this problem, does anybody have one?
Systems that doesn't work : Win XP; Java Plugin 1.6.0_06
Systems that work : Win XP; all Java PluginsI solved this problem by correcting a typo in the HTML source:
I had a error within the DIV tag containing the applet. In this case a TD tag within this DIV contained some bad characters. Such problems could be avoided by using a HTML validator. -
I am the applications administrator for an instance of Galaxy server. In Galaxy there is an option / plugin to opne a BAM file via the Integrative Genomics Viewer (IGV) created at the Broad Institute. When invoked it downloads a jnlp file and launches IGV and then is supposed to open the BAM file in the viewer. However, when it attempts to open the BAM file I get the following error:
"An Error occurred while loading: http://galaxy/display_application/52cef830ad5766ca/igv_bam/web/29212308ff643a94/data/galaxy_52cef830ad5766ca.bam
java.lang.RuntimeException: Error loading file: http://galaxy/display_application/52cef830ad5766ca/igv_bam/web/29212308ff643a94/data/galaxy_52cef830ad5766ca.bam NULL content-length."UPDATE
Compiling from command line I found out that the class definition for oracle.oats.scripting.modules.basic.api.IteratingVUserScript is missing. Do you know what .jar file contains this class?
Thanks.
Fede. -
We have some web services that run under OC4J 10.1.3.4. We have various JEE 'client' apps (JSF, servlets etc.) that use these web services. These JEE apps also run under OC4J.
We started a migration project from oc4j to weblogic 10.3.2. In phase 1 we want to move these JEE 'client' apps to weblogic. In phase 2 we want to move the web services themselves to weblogic with adjustments to the JEE 'client' apps as needed.
However we ran into an issue during this phase 1. Deploying these JEE 'client' apps to weblogic results in an error like this:
java.lang.Error: JAX-RPC 1.1 method is not supported in WLS 8.1 clients. If you are attempting to run an OC4J 10.1.3 JAX-RPC client in WLS, please see the Web Service Migration Guide for instructions.
We are including Oracle web services client libraries (http://download.oracle.com/otn/java/oc4j/1013/wsclient_extended.zip) in these JEE 'client' apps's war files because weblogic does not have them.
What part of Web Service Migration Guide is the above error message talking about? Do we have to re-generate the client side proxies for all these web services using weblogic's clientgen task in 'JAXRPC' mode? Many of these web services are doc/literal jax-rpc web services. Or does the migration guide recommend we migrate the web services first to weblogic? Any other specific information on working around this error message would be greatly appreciated.Hi,
I had the same issue but I just managed to fix it. You must upgrade and/or regenerate you proxy. This creates new classes (possibily in a new package) that you must use in your code. I had this error because the classes directory was not clean after the rebuild and the old classes (in the old package) were still present, so the compilation was successful with the old classes. So clean your classes directories, regenerate your proxy and use the new classes in your code.
Regards,
Sylvain
Maybe you are looking for
-
Report to check a transport request
Hi community, I would like to write a report that checks all objects of a transport request. For example I would like to check if all classes in that request follow the same naming convention and start with "ZCL_". Any ideas how to do this? Regards,
-
ITunes not working with new iPod
After recently getting a new iPod, I cant get it to work. The problem is no tin the iPod, Im sure of that. The problem occurs with any iPod on the system. The problem is that when the iPod is plugged in, it recognizes it, but not as an iPod. At first
-
I bought a new laptop after mine was stolen. I also purchased Adobe Acrobat Pro on Disc. I then realized my new steady state laptop doesn't have a CD drive... Can I download the software with my serial number or do I have to send it back and purchase
-
How to avoid the"Saving iTunes Library" dialog
I have been experience this issue for a couple of weeks now, the only information that i found online regarding this was related to an antivirus, but i never used any ativirus. if there any other reason why itunes is doing this? My library is only 38
-
My dad and i,have the same icloud id,when i updated the software (to ios 8.1.3) i have my dad´s photos on my iphone.And want my photos back (i tried by restoring my phone from my last backup)but still have my dad´s photos in my device