Java Security Dialog Name field

We are accessing data outside of the sandbox so we have a Verisign signature and am stuck with the Java Security dialog box. The dialog contains the following:
The application's digital signature has been verified.
Do you want to run the application?
Name: pulpcore.platform.applet.CoreApplet
Publisher: OURPUBLISHER
From: MYSERVER
Is there anyway to make the name field display something other than the start java class? (pulpcore.platform.applet.CoreApplet) Optimally, I would like to
display the name of our application!
Thanks in advance

Hi Shawn - did you ever find a solution to this problem? I'm experiencing it - but only with ie6...
in ie7, ie8 and firefox things look good by using:
(for ie7 and 8):
<object
 classid="clsid:CAFEEFAC-0015-0000-0000-ABCDEFFEDCBA"
 standby="loading!!!"
 width="590" height="35"
 onError="javaDisabled();"
 name="Applet Name for Dialog Name Field"
 >
 <param name="code" value="com.blah.blach.classname"/>
</object>
and firefox:
<embed
 name="Applet Name for Dialog Name Field"
 title="Applet Name for Dialog Name Field"
 type="application/x-java-applet;version=1.5"
 code="com.blah.blach.classname"
 width=".....
</embed>
Thanks!
-Mike

Similar Messages

Java security dialog freezes Java & browser when loading signed applet

Hi,
I have a slightly unusual scenario: I have two signed applets. One is developed by me and another one by somebody else. Let's call them Applet A and Applet B.
Here is what hapens:
1)Applet A loads
2)Security dialog for Applet A - "yes, trust this vendor"
3)applet A loads applet B with the following code taken from this sample:
http://www.java-tips.org/java-se-tips/java.applet/have-an-applet-launch-another-applet.html
Class appletClass = Class.forName(appletToLoad);
Applet realApplet = (Applet)appletClass.newInstance();
realApplet.setStub(this);
setLayout( new GridLayout(1,0));
add(realApplet);
realApplet.init();
realApplet.start();
4) Applet B loads
5) Applet B security dialog shows up, but it is gray. From this point on, nothing resonds. The java console is gray, all browser windows are frozen, the dialog is gray and frozen. I can move it around, but it leaves trails.
The only hint that I have is that the last security dialog is a modal dialog, but it seems like it's pushed twice, possibly causing a deadlock?
This is what I see in the trace file:
security: Certificate has been verified with Root CA certificates successfully
security: No timestamping info available
basic: Modality pushed
basic: Modality pushed
Usually a "Modality pushed" is followed by a "Modality Popped".
Does anyone have any idea how I can go about resolving this problem? This is not an issue if I manually import the certificate for Applet B into the java cert. store.
Thanks.

Were you able to figure out the problem? I have the same issue and it is killing me. Please share with me anything you found.

Does Thawte Java Developer Certificate Fix Empty Security Dialog Problem?

I have encountered the well-documented empty security dialog bug (http://developer.java.sun.com/developer/bugParade/bugs/4631425.html) with Plug-in 1.3.1_02.
Because I use a Thawte Multi-Purpose certificate to sign the JAR with Netscape's Signtool, I wonder... if I were to get a Java Code Signing certficate from Thawte, would that fix the empty-dialog problem?
Has anyone been down that road who can tell me before I lay out the $$ for the cert?
I know that "upgrade to plugin 1.4" may come back as an option... it's not appropriate for our situation... we have to no control over the user's environment and have to be able to handle whatever they come at us with.
TIA....
JZ

I know that the documented bug says that ... but ... I'm not sure I'm buying into the "long org name" hypothesis.
The reason... I used the same configuration that doesn't work with my applet and went to another site with a signed applet. That site worked. The CN of the Subject (when you view the certificate) was "Telepix Imaging Inc." (20 chars) and ours is "Public Works and Government Services Canada" (43 chars). I know it's significantly longer, but would 23 chars be enough to push everything out of view?
There are also very significant differences in the way the certs are formatted (since theirs is from Versign and ours is from Thawte). I'm tempted think it's something else in the cert.
BTW, what do you mean by 'us'?
JZ

Java web start security dialog with Java 7 update 51

I build a Java Web Start application signed with a valid certificate.
When I star the application the security dialog appear correctly as show in this figure
http://www.java.com/en/img/download/trusted_signed.jpg
My issue is about the "do not show again" checkbox.
If the attributes href are present in the jnlp tag of the jnlp file the checkbox appear.
If the attribute are not present, the checkbox doesn't appear and the run needs to be confirmed every time.
(Example:
<jnlp spec="1.0+" codebase=
"http://docs.oracle.com/javase/tutorialJWS/samples/deployment/webstart_ComponentArch_DynamicTreeDemo"
href="dynamictree_webstart.jnlp">
This is a problem because my jnlp file is under a password protected directory and if href is specifed, the Java Web Start application try to retrieve it as the other resources. ( result in access denied because only the browser session is authenticated and the run fails)
The documentation at Deploying a Java Web Start Application said:
The codebase and href attributes are optional when deploying Java Web Start applications that will run on at least the Java SE 6 update 18 release or later. You must specify the codebase and href attributes when deploying Java Web Start applications that will run with previous releases of the Java Runtime Environment software.
What is the right code? With href or without?
Is this a BUG or a feature?
How can I show the "don't show again" checkbox without having to specify the href attribute?

From the documentation at JAR File Manifest Attributes for Security
If the Application-Library-Allowable-Codebase attribute is present and matches the location from which the RIA is started, then a single host is listed in the Location field for the prompt and the option to hide future prompts is provided.
This issue is also discussed here: Java Web Start security dialogs with Java 7 update 51 - Stack Overflow

How Does The Browser Know The "File Name" field in the "Save As" dialog

Hi!
I have a servlet called co.com.SomeStaff who reads a binary file from the server an sends it to the breowser.
The Browser opens the "Save As" Dialog whith the value "co.com.SomeStaff" in the File name field, but and I need the name "SomeBinariFile.exe" instead.
How can I change that value?
Thanks All.

Use <%
response.setHeader("Content-Disposition", "attachment; filename=filename.2save");
%>

How can I secure name fields in A9

I have just got acrobat9 and I dont seem to be able to get
the functionality that 8 had (much simpler in setting up forms) I
have 3 questions.
1. I have a name field and a text input field. How do I
secure the name fiels so as no one can mess with it
2. I'm havind trouble in placing and sizing the little tick
boxes. when selected the default size is to big.
3. nowhere can I find the calculation control where dollar
values are entered and then totaled .
any help please. I dont use acrobat a lot but in this case my
client wants it.
TIA

Thank you for your post. These forums are specific to the
Acrobat.com website and its set of hosted services, and do not
cover the Acrobat family of desktop products. Please visit the
following forums for any questions related to the Acrobat family of
desktop products:
http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/

Security Dialog Box appears in Javascripts

hi all.
I ve some problem with my javascript which is used to present menus at the homepage. I have a dropdown menu also, wherein, whenever I rollover t mouse on dropdown menus, a security dialog box appears(this page works on https), and it doesnot appear until u refresh the page again.
I have 2 menu scripts. In menu1.js, I call a fn which is in menu_main.js
The call in menu1.js, goes like this
startSubmenu("menu_pre_b7","menu_pre_menu",83);submenuItem("Help",loc+"pre_help.htm","_self","menu_pre_plain");submenuItem("Search",loc+"GetPage1Action.do?command=getPage1","_self","menu_pre_plain");submenuItem("DJVU Plugin",loc+"pre_lizardtech_djvu.htm","_self","menu_pre_plain");endSubmenu("menu_pre_b7"); and the menu_main.js has the function for startSubMenu as
function startSubmenu(name,style,sw){var depth=name.split("_").length+1000;if(NS4)return;if(sw>0)menuw=sw;d.write("<div id=\""+name+"\" style=\"z-index:999;border-color:#000000;border-style:solid;border-width:"+bd+"px 0px "+bd+"px 0px;background-color:#ffffff;position:absolute;left:0px;top:0px;visibility:hidden;z-index:"+depth+";width:"+(menuw+(NS7?bd*2:0))+"px\">");}I hope the problem is with the startSubMenu function. Can someone help me on this?

Unfortunately this forum is for the Java programming language, not for the ECMAScript compliant Javascript.
Sincerely,
Jussi

Java.awt.Dialog in Java 1.6 has a memory leak

When a modal Dialog opens a modal sub-dialog, the Dialog stays in memory after both the sub-dialog and the Dialog itself is disposed.
The field that contains the leaked object is Dialog.modalDialogs (static). The methods which causes the leak are Dialog.modalHide and Dialog.modalShow.
Whenever a modal Dialog is opened, Dialog.modalShow is called, and adds itself to Dialog.modalDialogs.
When it closes, Dialog.modalHide is called and removes one copy of itself from Dialog.modalDialogs. Then Dialog.modalShow is called on all previously blocked modal dialogs. When the sub-dialog is opened and closed, Dialog.modalDialogs contains two references to the main Dialog, and only one of them is removed when Dialog.modalHide for that Dialog is called.
To detect the leak, just put a break point in Dialog.modalHide, after modalDialogs.remove(this);. When opening a Dialog and closing it without opening a sub-dialog, the Dialog.modalDialogs field should be empty. When a sub-dialog was opened and closed before the main Dialog is closed, the Dialog.modalDialogs field contains a reference to the disposed main Dialog.
This leak does not exist in 1.5.0_10 (no Dialog.modalDialogs field). I have searched the bug database, but I have not found this bug there. Could anyone confirm this?
A simple code to reproduce the leak:
import java.awt.Dimension;
import java.awt.Toolkit;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.event.WindowEvent;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JOptionPane;
public class Test {
   public static void main(String[] args) {
      final JFrame frame = new JFrame() {
         protected void processWindowEvent(WindowEvent e) {
            super.processWindowEvent(e);
            if (e.getID() == WindowEvent.WINDOW_CLOSING) {
               System.exit(0);
      JButton button = new JButton("Dialog");
      button.addActionListener(new ActionListener() {
         public void actionPerformed(ActionEvent aE) {
            JButton subButton = new JButton("SubDialog");
            subButton.addActionListener(new ActionListener() {
               public void actionPerformed(ActionEvent aE) {
                  JOptionPane.showMessageDialog(frame, "SubDialog");
            JOptionPane.showMessageDialog(frame, subButton);
      frame.getContentPane().add(button);
      frame.pack();
      // Center the window
      Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize();
      Dimension frameSize = frame.getSize();
      if (frameSize.height > screenSize.height) {
         frameSize.height = screenSize.height;
      if (frameSize.width > screenSize.width) {
         frameSize.width = screenSize.width;
      frame.setLocation((screenSize.width - frameSize.width) / 2,
            (screenSize.height - frameSize.height) / 2);
      frame.setVisible(true);
}

Sorry, I just found the bug in the bugdatabase (with google of course,):
[http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6497929]

Java.security.cert.CertificateException

Hi,
I am using a JAVA client to connect to a https server which uses certificates for authentication.
The server uses gSOAP certificates for client authentication and encryption of messages.
I am using JSSE coming along with JDK1.6 and generated keystore file from client.pem and cacert.pem files used by the server.
I need to send SOAP messages with attachments.
I am using SAAJ API with JDK 1.6 .
When I try to connect to the server through javax.xml.soap.SOAPConnection, I am getting java.security.cert.CertificateException. Please see the exception below.
Note: Server is responding properly to SOAP UI tool(java testing tool) with certifcates authentication.
I have enabled debug option in SSL.
E:\test\properties\storefile.jks
keyStore is : E:\test\properties\storefile.jks
keyStore type is : jks
keyStore provider is :
init keystore
init keymanager of type SunX509
trustStore is: E:\test\properties\storefile.jks
trustStore type is : jks
trustStore provider is :
init truststore
adding as trusted cert:
Subject: [email protected], CN=genivia.com, OU=IT, O="Genivia, Inc.", L=Tallahassee, ST=FL, C=US
Issuer: [email protected], CN=genivia.com, OU=IT, O="Genivia, Inc.", L=Tallahassee, ST=FL, C=US
Algorithm: RSA; Serial number: 0x0
Valid from Sat Oct 02 22:38:06 IST 2004 until Tue Oct 02 22:38:06 IST 2007
adding as trusted cert:
Subject: [email protected], CN=localhost, OU=IT, O="Genivia, Inc.", L=Tallahassee, ST=FL, C=US
Issuer: [email protected], CN=genivia.com, OU=IT, O="Genivia, Inc.", L=Tallahassee, ST=FL, C=US
Algorithm: RSA; Serial number: 0x7
Valid from Sun Dec 25 01:01:53 IST 2005 until Wed Dec 24 01:01:53 IST 2008
adding as trusted cert:
Subject: [email protected], CN=localhost, OU=IT, O="Genivia, Inc.", L=Tallahassee, ST=FL, C=US
Issuer: [email protected], CN=genivia.com, OU=IT, O="Genivia, Inc.", L=Tallahassee, ST=FL, C=US
Algorithm: RSA; Serial number: 0x8
Valid from Sun Dec 25 01:03:13 IST 2005 until Wed Dec 24 01:03:13 IST 2008
trigger seeding of SecureRandom
done seeding SecureRandom
%% No cached client session
*** ClientHello, TLSv1
RandomCookie: GMT: 1155448094 bytes = { 120, 70, 246, 123, 195, 47, 61, 191, 223, 241, 23, 204, 98, 143, 212, 251, 80, 10, 100, 183, 82, 82, 215, 228, 212, 47, 68, 224 }
Session ID: {}
Cipher Suites: [SSL_RSA_WITH_RC4_128_MD5, SSL_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, SSL_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_DES_CBC_SHA, SSL_DHE_RSA_WITH_DES_CBC_SHA, SSL_DHE_DSS_WITH_DES_CBC_SHA, SSL_RSA_EXPORT_WITH_RC4_40_MD5, SSL_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA]
Compression Methods: { 0 }
Thread-3, WRITE: TLSv1 Handshake, length = 73
Thread-3, WRITE: SSLv2 client hello message, length = 98
Thread-3, READ: TLSv1 Handshake, length = 74
*** ServerHello, TLSv1
RandomCookie: GMT: 1155531752 bytes = { 248, 141, 63, 154, 117, 213, 184, 250, 239, 237, 26, 225, 175, 38, 151, 65, 101, 127, 134, 46, 180, 80, 153, 133, 215, 120, 102, 11 }
Session ID: {100, 201, 98, 232, 113, 191, 163, 129, 1, 101, 251, 29, 233, 245, 144, 203, 231, 208, 202, 248, 160, 99, 84, 248, 86, 16, 235, 234, 20, 73, 231, 148}
Cipher Suite: SSL_RSA_WITH_RC4_128_MD5
Compression Method: 0
%% Created: [Session-1, SSL_RSA_WITH_RC4_128_MD5]
** SSL_RSA_WITH_RC4_128_MD5
Thread-3, READ: TLSv1 Handshake, length = 1868
*** Certificate chain
chain [0] = [
Version: V3
Subject: [email protected], CN=localhost, OU=IT, O="Genivia, Inc.", L=Tallahassee, ST=FL, C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 1024 bits
modulus: 144881101064455404788814091404981462608080902688277626878350142057531273562236240952084735254146287262789443540177122740514352105900513219519909051335421867736741713195463254360663999239941476817345303119999799829037388457231058611674562175705514528085594563474765367007497034178272408363177194954006361904887
public exponent: 65537
Validity: [From: Sun Dec 25 01:03:13 IST 2005,
 To: Wed Dec 24 01:03:13 IST 2008]
Issuer: [email protected], CN=genivia.com, OU=IT, O="Genivia, Inc.", L=Tallahassee, ST=FL, C=US
SerialNumber: [ 08]
Certificate Extensions: 4
[1]: ObjectId: 2.16.840.1.113730.1.13 Criticality=false
Extension unknown: DER encoded OCTET string =
0000: 04 1F 16 1D 4F 70 65 6E 53 53 4C 20 47 65 6E 65 ....OpenSSL Gene
0010: 72 61 74 65 64 20 43 65 72 74 69 66 69 63 61 74 rated Certificat
0020: 65 e
[2]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
0000: 3D C1 C8 B5 19 17 C3 8C 12 64 3C 05 C3 22 EE 7B =........d<.."..
0010: BA 27 B4 C1 .'..
[3]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
0000: E0 CC 88 8B 41 A0 21 4A A4 61 18 67 27 61 A0 C9 ....A.!J.a.g'a..
0010: 49 95 77 CA I.w.
[[email protected], CN=genivia.com, OU=IT, O="Genivia, Inc.", L=Tallahassee, ST=FL, C=US]
SerialNumber: [ 00]
[4]: ObjectId: 2.5.29.19 Criticality=false
BasicConstraints:[
CA:false
PathLen: undefined
Algorithm: [SHA1withRSA]
Signature:
0000: 6E D0 0E EC 85 EA A9 71 60 5D CB 13 3A 0C C2 C6 n......q`]..:...
0010: A1 92 15 14 2A BB 86 2A 1D 68 B1 4B 41 C0 0B FB ....*..*.h.KA...
0020: 35 C7 0F 6E 51 99 B3 25 95 4F 58 18 3D 73 F2 06 5..nQ..%.OX.=s..
0030: 18 63 40 21 A7 44 1D AB 46 DB DD 6C 20 7D 23 23 .c@!.D..F..l .##
0040: 08 84 92 CE 04 93 10 B3 CB 84 67 FD 3F 53 81 51 ..........g.?S.Q
0050: 25 60 EE D1 02 89 06 58 E6 E0 B4 C2 20 D8 E8 84 %`.....X.... ...
0060: 8A 4E 8D 59 62 67 33 4C 95 BD A3 F7 68 76 5E BA .N.Ybg3L....hv^.
0070: D9 84 3F 80 C8 1E 49 3A 59 D0 B4 74 9E 2D CD F6 ..?...I:Y..t.-..
chain [1] = [
Version: V3
Subject: [email protected], CN=genivia.com, OU=IT, O="Genivia, Inc.", L=Tallahassee, ST=FL, C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 1024 bits
modulus: 106482211752195899275275639329238789380560290379431640534106480581317795742917955972475513891969031216742557266096088552725987675210922796797720103531106400345818891764659480805498923495886457178236281557583158652266656923442983245641013901721295378444704296581436391012531718274035287004196101203604693764023
public exponent: 65537
Validity: [From: Sat Oct 02 22:38:06 IST 2004,
 To: Tue Oct 02 22:38:06 IST 2007]
Issuer: [email protected], CN=genivia.com, OU=IT, O="Genivia, Inc.", L=Tallahassee, ST=FL, C=US
SerialNumber: [ 00]
Certificate Extensions: 3
[1]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
0000: E0 CC 88 8B 41 A0 21 4A A4 61 18 67 27 61 A0 C9 ....A.!J.a.g'a..
0010: 49 95 77 CA I.w.
[2]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
0000: E0 CC 88 8B 41 A0 21 4A A4 61 18 67 27 61 A0 C9 ....A.!J.a.g'a..
0010: 49 95 77 CA I.w.
[[email protected], CN=genivia.com, OU=IT, O="Genivia, Inc.", L=Tallahassee, ST=FL, C=US]
SerialNumber: [ 00]
[3]: ObjectId: 2.5.29.19 Criticality=false
BasicConstraints:[
CA:true
PathLen:2147483647
Algorithm: [SHA1withRSA]
Signature:
0000: 59 9B F6 45 7E 10 3C 79 3B 88 FB 74 B3 2E F7 4F Y..E..<y;..t...O
0010: 67 16 09 C1 2F 4E AC 7A 98 EA B4 12 08 6D 96 37 g.../N.z.....m.7
0020: 1A 70 A0 79 FC 4A A7 54 BA 21 FD 35 FE 67 55 EF .p.y.J.T.!.5.gU.
0030: D9 D9 18 99 5D 7A 03 3B EE DC F8 54 89 73 B8 86 ....]z.;...T.s..
0040: B3 FB 63 4E F8 6A 9B AF A1 2B 39 1F B7 50 63 AB ..cN.j...+9..Pc.
0050: 46 E1 F7 F5 A3 13 D4 3B F0 1D 8A 54 E4 65 3E 94 F......;...T.e>.
0060: 6D 5A 58 77 50 A7 CB 99 E7 2E 28 90 C8 37 67 D2 mZXwP.....(..7g.
0070: 19 E6 78 A3 91 49 E9 08 74 0E FA AF FC 16 B3 0B ..x..I..t.......
Feb 24, 2007 9:50:47 AM com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection post
SEVERE: SAAJ0009: Message send failed
com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: java.security.PrivilegedActionException: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Message send failed
 at com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection.call(Unknown Source)
 at SOAPConnector$1.run(SOAPConnector.java:145)
Caused by: java.security.PrivilegedActionException: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Message send failed
 at java.security.AccessController.doPrivileged(Native Method)Found trusted certificate:
Version: V3
Subject: [email protected], CN=localhost, OU=IT, O="Genivia, Inc.", L=Tallahassee, ST=FL, C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 1024 bits
modulus: 144881101064455404788814091404981462608080902688277626878350142057531273562236240952084735254146287262789443540177122740514352105900513219519909051335421867736741713195463254360663999239941476817345303119999799829037388457231058611674562175705514528085594563474765367007497034178272408363177194954006361904887
public exponent: 65537
Validity: [From: Sun Dec 25 01:03:13 IST 2005,
 To: Wed Dec 24 01:03:13 IST 2008]
Issuer: [email protected], CN=genivia.com, OU=IT, O="Genivia, Inc.", L=Tallahassee, ST=FL, C=US
SerialNumber: [ 08]
Certificate Extensions: 4
[1]: ObjectId: 2.16.840.1.113730.1.13 Criticality=false
Extension unknown: DER encoded OCTET string =
0000: 04 1F 16 1D 4F 70 65 6E 53 53 4C 20 47 65 6E 65 ....OpenSSL Gene
0010: 72 61 74 65 64 20 43 65 72 74 69 66 69 63 61 74 rated Certificat
0020: 65 e
[2]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
0000: 3D C1 C8 B5 19 17 C3 8C 12 64 3C 05 C3 22 EE 7B =........d<.."..
0010: BA 27 B4 C1 .'..
[3]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
0000: E0 CC 88 8B 41 A0 21 4A A4 61 18 67 27 61 A0 C9 ....A.!J.a.g'a..
0010: 49 95 77 CA I.w.
[[email protected], CN=genivia.com, OU=IT, O="Genivia, Inc.", L=Tallahassee, ST=FL, C=US]
SerialNumber: [ 00]
[4]: ObjectId: 2.5.29.19 Criticality=false
BasicConstraints:[
CA:false
PathLen: undefined
Algorithm: [SHA1withRSA]
Signature:
0000: 6E D0 0E EC 85 EA A9 71 60 5D CB 13 3A 0C C2 C6 n......q`]..:...
0010: A1 92 15 14 2A BB 86 2A 1D 68 B1 4B 41 C0 0B FB ....*..*.h.KA...
0020: 35 C7 0F 6E 51 99 B3 25 95 4F 58 18 3D 73 F2 06 5..nQ..%.OX.=s..
0030: 18 63 40 21 A7 44 1D AB 46 DB DD 6C 20 7D 23 23 .c@!.D..F..l .##
0040: 08 84 92 CE 04 93 10 B3 CB 84 67 FD 3F 53 81 51 ..........g.?S.Q
0050: 25 60 EE D1 02 89 06 58 E6 E0 B4 C2 20 D8 E8 84 %`.....X.... ...
0060: 8A 4E 8D 59 62 67 33 4C 95 BD A3 F7 68 76 5E BA .N.Ybg3L....hv^.
0070: D9 84 3F 80 C8 1E 49 3A 59 D0 B4 74 9E 2D CD F6 ..?...I:Y..t.-..
Thread-3, SEND TLSv1 ALERT: fatal, description = certificate_unknown
Thread-3, WRITE: TLSv1 Alert, length = 2
Thread-3, called closeSocket()
Thread-3, handling exception: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: No subject alternative names present
 ... 2 more
Caused by: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Message send failed
 at com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection.post(Unknown Source)
 at com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection$PriviledgedPost.run(Unknown Source)
 ... 3 more
Caused by: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: No subject alternative names present
 at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Unknown Source)
 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(Unknown Source)
 at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Unknown Source)
 at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Unknown Source)
 at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(Unknown Source)
 at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(Unknown Source)
 at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Unknown Source)
 at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Unknown Source)
 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source)
 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(Unknown Source)
 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(Unknown Source)
 at sun.net.www.protocol.https.HttpsClient.afterConnect(Unknown Source)
 at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
 at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(Unknown Source)
 at sun.net.www.protocol.https.HttpsURLConnectionImpl.getOutputStream(Unknown Source)
 ... 5 more
Caused by: java.security.cert.CertificateException: No subject alternative names present
 at sun.security.util.HostnameChecker.matchIP(Unknown Source)
 at sun.security.util.HostnameChecker.match(Unknown Source)
 at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkIdentity(Unknown Source)
 at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(Unknown Source)
 ... 17 more
CAUSE:
java.security.PrivilegedActionException: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Message send failed
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection.call(Unknown Source)
 at SOAPConnector$1.run(SOAPConnector.java:145)
Caused by: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Message send failed
 at com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection.post(Unknown Source)
 at com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection$PriviledgedPost.run(Unknown Source)
 ... 3 more
Caused by: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: No subject alternative names present
 at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Unknown Source)
 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(Unknown Source)
 at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Unknown Source)
 at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Unknown Source)
 at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(Unknown Source)
 at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(Unknown Source)
 at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Unknown Source)
 at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Unknown Source)
 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source)
 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(Unknown Source)
 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(Unknown Source)
 at sun.net.www.protocol.https.HttpsClient.afterConnect(Unknown Source)
 at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
 at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(Unknown Source)
 at sun.net.www.protocol.https.HttpsURLConnectionImpl.getOutputStream(Unknown Source)
 ... 5 more
Caused by: java.security.cert.CertificateException: No subject alternative names present
 at sun.security.util.HostnameChecker.matchIP(Unknown Source)
 at sun.security.util.HostnameChecker.match(Unknown Source)
 at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkIdentity(Unknown Source)
 at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(Unknown Source)
 ... 17 more
CAUSE:
java.security.PrivilegedActionException: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Message send failed
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection.call(Unknown Source)
 at SOAPConnector$1.run(SOAPConnector.java:145)
Caused by: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Message send failed
 at com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection.post(Unknown Source)
 at com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection$PriviledgedPost.run(Unknown Source)
 ... 3 more
Caused by: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: No subject alternative names present
 at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Unknown Source)
 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(Unknown Source)
 at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Unknown Source)
 at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Unknown Source)
 at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(Unknown Source)
 at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(Unknown Source)
 at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Unknown Source)
 at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Unknown Source)
 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source)
 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(Unknown Source)
 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(Unknown Source)
 at sun.net.www.protocol.https.HttpsClient.afterConnect(Unknown Source)
 at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
 at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(Unknown Source)
 at sun.net.www.protocol.https.HttpsURLConnectionImpl.getOutputStream(Unknown Source)
 ... 5 more
Caused by: java.security.cert.CertificateException: No subject alternative names present
 at sun.security.util.HostnameChecker.matchIP(Unknown Source)
 at sun.security.util.HostnameChecker.match(Unknown Source)
 at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkIdentity(Unknown Source)
 at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(Unknown Source)
 ... 17 more
Any help is appreciated.

did you find the solution for the issue i am using jscape now...

Java.security.cert.CertificateException: Untrusted Cert Chain

Hi all,
While sending transaction to our supplier I am facing below error, Actually Our trading partner has given .p7b cert, I converted it into base 64 and i m using in b2b server. I am doing the same with all the suppliers but I am facing issue with only this trading partner. I asked him to send a new trusted certificate but he said that he is having 100's of customers, all are using the same certficate.
Error
http.sender.timeout=0
2010.05.20 at 10:52:20:711: Thread-19: B2B - (DEBUG) scheme null userName null realm null
2010.05.20 at 10:52:22:159: Thread-19: B2B - (WARNING)
Message Transmission Transport Exception
Transport Error Code is OTA-HTTP-SEND-1006
StackTrace oracle.tip.transport.TransportException: [IPT_HttpSendHttpResponseError] HTTP response error :java.security.cert.CertificateException: Untrusted Cert Chain.
 at oracle.tip.transport.TransportException.create(TransportException.java:91)
 at oracle.tip.transport.basic.HTTPSender.send(HTTPSender.java:627)
 at oracle.tip.transport.b2b.B2BTransport.send(B2BTransport.java:311)
 at oracle.tip.adapter.b2b.transport.TransportInterface.send(TransportInterface.java:1034)
 at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1758)
 at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:976)
 at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1167)
 at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
 at oracle.tip.transport.basic.FileSourceMonitor.processMessages(FileSourceMonitor.java:903)
 at oracle.tip.transport.basic.FileSourceMonitor.run(FileSourceMonitor.java:317)
Caused by: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Untrusted Cert Chain
 at com.sun.net.ssl.internal.ssl.BaseSSLSocketImpl.a(DashoA12275)
 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
 at com.sun.net.ssl.internal.ssl.SunJSSE_az.a(DashoA12275)
 at com.sun.net.ssl.internal.ssl.SunJSSE_az.a(DashoA12275)
 at com.sun.net.ssl.internal.ssl.SunJSSE_ax.a(DashoA12275)
 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.j(DashoA12275)
 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
 at com.sun.net.ssl.internal.ssl.AppOutputStream.write(DashoA12275)
 at java.io.ByteArrayOutputStream.writeTo(ByteArrayOutputStream.java:112)
 at HTTPClient.HTTPConnection.sendRequest(HTTPConnection.java:3018)
 at HTTPClient.HTTPConnection.handleRequest(HTTPConnection.java:2843)
 at HTTPClient.HTTPConnection.setupRequest(HTTPConnection.java:2635)
 at HTTPClient.HTTPConnection.Post(HTTPConnection.java:1107)
 at oracle.tip.transport.basic.HTTPSender.send(HTTPSender.java:590)
 ... 8 more
Caused by: java.security.cert.CertificateException: Untrusted Cert Chain
 at oracle.security.pki.ssl.C21.checkClientTrusted(C21)
 at oracle.security.pki.ssl.C21.checkServerTrusted(C21)
 at oracle.security.pki.ssl.C08.checkServerTrusted(C08)
 at com.sun.net.ssl.internal.ssl.JsseX509TrustManager.checkServerTrusted(DashoA12275)
 ... 21 more
2010.05.20 at 10:52:22:164: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send Error in sending message
2010.05.20 at 10:52:22:168: Thread-19: B2B - (INFORMATION) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Request Message Transmission failed
2010.05.20 at 10:52:22:170: Thread-19: B2B - (DEBUG) DBContext beginTransaction: Enter
2010.05.20 at 10:52:22:173: Thread-19: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2010.05.20 at 10:52:22:176: Thread-19: B2B - (DEBUG) DBContext beginTransaction: Leave
2010.05.20 at 10:52:22:179: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab [IPT_HttpSendHttpResponseError] HTTP response error :java.security.cert.CertificateException: Untrusted Cert Chain.
Untrusted Cert Chain
2010.05.20 at 10:52:22:226: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:notifyApp retry value <= 0, so sending exception to IP_IN_QUEUE
2010.05.20 at 10:52:22:232: Thread-19: B2B - (DEBUG) Engine:notifyApp Enter
2010.05.20 at 10:52:22:248: Thread-19: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>543222</correlationId>
<b2bMessageId>543222</b2bMessageId>
<errorCode>AIP-50079</errorCode>
<errorText>Transport error: [IPT_HttpSendHttpResponseError] HTTP response error :java.security.cert.CertificateException: Untrusted Cert Chain.
Untrusted Cert Chain</errorText>
<errorDescription>
<![CDATA[Machine Info: (usmtnz-sinfwi02)Transport error: [IPT_HttpSendHttpResponseError] HTTP response error :java.security.cert.CertificateException: Untrusted Cert Chain.
Untrusted Cert Chain ]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2010.05.20 at 10:52:22:298: Thread-19: B2B - (DEBUG) Engine:notifyApp Exit
2010.05.20 at 10:52:22:301: Thread-19: B2B - (DEBUG) DBContext commit: Enter
2010.05.20 at 10:52:22:307: Thread-19: B2B - (DEBUG) DBContext commit: Transaction.commit()
2010.05.20 at 10:52:22:310: Thread-19: B2B - (DEBUG) DBContext commit: Leave
2010.05.20 at 10:52:22:313: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequest Exit
2010.05.20 at 10:52:22:317: Thread-19: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage:
***** REQUEST MESSAGE *****
Exchange Protocol: AS2 Version 1.1
Transport Protocol: HTTPS
Unique Message ID: <543222@EMRSNS>
Trading Partner: ZZEASY_PROD
Message Signed: RSA
Payload encrypted: 3DES
Attachment: None

Hi CNU,
1st they has given me in .p7b certificateIs it a self-signed certificate? If no then do you have the CA certs as well?
Open the certificate by double clicking on it. If "Issued To" and "Issued By" fields are same then it is a self signed cert and you need to import only this cert (in base64 format) into wallet.
If it is not a self-signed cert then open the certificate and click on "Certification Path" tab. You should be able to see the issue's certificate here. Make sure that you have imported all issuers certificate along with your TP's cert in the wallet. Moreover, check that all the certs (TP cert and it's issuer cert's) are valid in terms of dates. You can see the "Certificate status" in "Certification Path" tab of certificate.
Please provide the certificate chain details here along with list of certs in wallet (you may mail it to my id as well - [email protected])
Regards,
Anuj

Error in weblogic7.0 :java.security.NoSuchAlgorithmException:

Hi All
thanks in advance.
i am facing a peculiar problem while using SunJce provider
i have some classes to encrypt& decrypt some information using
DeffieHellman protocol.
Problem 1
while i am running those classes in command prompts
some time it gives me correct results where as other time during decryption i am unable to get the plaintext (i am getting some junk character),where as some time it gives me Badpadding exception
I am using JDK1.3 which comes with weblogic and jce1.2.2
for classpath and path setting
set path=D:\bea\jdk131_03\bin
set classpath=%classpath%; D:\bea\jdk131_03\jre\lib\ext\ jce1_2_2.jar
set classpath=%classpath%; D:\bea\jdk131_03\jre\lib\ext\sunjce_provider.jar
set classpath=%classpath%; D:\bea\jdk131_03\jre\lib\ext\local_policy.jar
set classpath=%classpath%; D:\bea\jdk131_03\jre\ext\US_export_policy.jar
my BEA_HOME=d\bea and JAVA_HOME=D:\bea\jdk131_03\jre
Problem 2
While i am using those classes in servlet and jsp which are deployed in weblogic 7
Some time i am getting correct results
but as i stop and start the weblogic server ,i am getting .NoSuchAlgorithmException.
So mainly i am having two classes DiffieHellmanKeyGeneRation and DHEncryptDecrypt given below
import java.io.*;
import java.math.BigInteger;
import java.security.*;
import java.security.spec.*;
import java.security.interfaces.*;
import javax.crypto.*;
import javax.crypto.spec.*;
import javax.crypto.interfaces.*;
import com.sun.crypto.provider.SunJCE;
public class DiffieHellmanKeyGeneRation {
PublicKey alicePubKey=null;
     PublicKey bobPubKey=null;
     KeyAgreement aliceKeyAgree =null;
     KeyAgreement bobKeyAgree =null;
* DiffieHellmanKeyGeneRation() constructor -Set the mode and call run method to generate Keypairs
* and assigns it to the instance variables .
* @param nil
* @returns nil
public DiffieHellmanKeyGeneRation(){
     try {
String mode = "GENERATE_DH_PARAMS";
               run(mode);
} catch (Exception e) {
System.err.println("Error: " + e);
System.exit(1);
* getAlicePubKey() -Return the Instance Variable alicePubKey
* @param nil
* @returns PublicKey
public PublicKey getAlicePubKey()
return alicePubKey;
* getBobPubKey() -Return the Instance Variable bobPubKey
* @param nil
* @returns PublicKey
public PublicKey getBobPubKey()
return bobPubKey;
* getAliceKeyAgree() -Return the Instance Variable aliceKeyAgree
* @param nil
* @returns KeyAgreement
     public KeyAgreement getAliceKeyAgree()
return aliceKeyAgree;
* getBobKeyAgree() -Return the Instance Variable bobKeyAgree
* @param nil
* @returns KeyAgreement
public KeyAgreement getBobKeyAgree()
return bobKeyAgree;
*run() method -Generate Algorithm instance,KeySpec,and keypair
* and assigns it to the instance variables .
* @param String
* @returns nil
private void run(String mode) throws Exception {
DHParameterSpec dhSkipParamSpec=null;
// System.out.println("Creating Diffie-Hellman parameters (takes VERY long) ...");
AlgorithmParameterGenerator paramGen=AlgorithmParameterGenerator.getInstance("DH");
paramGen.init(512);
AlgorithmParameters params = paramGen.generateParameters();
dhSkipParamSpec = (DHParameterSpec)params.getParameterSpec(DHParameterSpec.class);
* Alice creates her own DH key pair, using the DH parameters from
* above
// System.out.println("ALICE: Generate DH keypair ...");
KeyPairGenerator aliceKpairGen = KeyPairGenerator.getInstance("DH");
aliceKpairGen.initialize(dhSkipParamSpec);
KeyPair aliceKpair = aliceKpairGen.generateKeyPair();
// Alice creates and initializes her DH KeyAgreement object
// System.out.println("ALICE: Initialization ...");
aliceKeyAgree = KeyAgreement.getInstance("DH");
aliceKeyAgree.init(aliceKpair.getPrivate());
// Alice encodes her public key, and sends it over to Bob.
byte[] alicePubKeyEnc = aliceKpair.getPublic().getEncoded();
* Let's turn over to Bob. Bob has received Alice's public key
* in encoded format.
* He instantiates a DH public key from the encoded key material.
KeyFactory bobKeyFac = KeyFactory.getInstance("DH");
X509EncodedKeySpec x509KeySpec = new X509EncodedKeySpec(alicePubKeyEnc);
alicePubKey = bobKeyFac.generatePublic(x509KeySpec);
* Bob gets the DH parameters associated with Alice's public key.
* He must use the same parameters when he generates his own key
* pair.
DHParameterSpec dhParamSpec = ((DHPublicKey)alicePubKey).getParams();
// Bob creates his own DH key pair
// System.out.println("BOB: Generate DH keypair ...");
KeyPairGenerator bobKpairGen = KeyPairGenerator.getInstance("DH");
bobKpairGen.initialize(dhParamSpec);
KeyPair bobKpair = bobKpairGen.generateKeyPair();
// Bob creates and initializes his DH KeyAgreement object
// System.out.println("BOB: Initialization ...");
bobKeyAgree = KeyAgreement.getInstance("DH");
bobKeyAgree.init(bobKpair.getPrivate());
// Bob encodes his public key, and sends it over to Alice.
byte[] bobPubKeyEnc = bobKpair.getPublic().getEncoded();
* Alice uses Bob's public key for the first (and only) phase
* of her version of the DH
* protocol.
* Before she can do so, she has to instanticate a DH public key
* from Bob's encoded key material.
KeyFactory aliceKeyFac = KeyFactory.getInstance("DH");
x509KeySpec = new X509EncodedKeySpec(bobPubKeyEnc);
bobPubKey = aliceKeyFac.generatePublic(x509KeySpec);
2)
import java.io.*;
import java.math.BigInteger;
import java.security.*;
import java.security.spec.*;
import java.security.interfaces.*;
import javax.crypto.*;
import javax.crypto.spec.*;
import javax.crypto.interfaces.*;
import sun.misc.*;
import com.sun.crypto.provider.SunJCE;
public class DHEncryptDecrypt {
PublicKey alicePubKey=null;
     PublicKey bobPubKey=null;
     KeyAgreement aliceKeyAgree =null;
     KeyAgreement bobKeyAgree =null;
     SecretKey bobDesKey = null;
     SecretKey aliceDesKey =null;
* DHEncryptDecrypt constructor -it intancetiate DiffieHellmanKeyGeneRation object to get Public key of both party and Shared Secrete
* and assigns it to the instance variables .
* @param nil
* @returns nil
     public DHEncryptDecrypt()
          try{
          init();
     }catch(Exception e){e.printStackTrace();}
* init() -it DiffieHellmanKeyGeneRation object to get Public key of both party and Shared Secrete
* and assigns it to the instance variable ds.
* @param nil
* @returns nil
private void init() throws Exception
     System.out.println("Initialising...");
               DiffieHellmanKeyGeneRation dhPubKey=new DiffieHellmanKeyGeneRation();
               alicePubKey=dhPubKey.getAlicePubKey();
               bobPubKey=dhPubKey.getBobPubKey();
aliceKeyAgree=dhPubKey.getAliceKeyAgree();
               bobKeyAgree=dhPubKey.getBobKeyAgree();
//System.out.println("ALICE: Execute PHASE1 ...");
aliceKeyAgree.doPhase(bobPubKey, true);
     * Bob uses Alice's public key for the first (and only) phase
     * of his version of the DH
     * protocol.
// System.out.println("BOB: Execute PHASE1 ...");
bobKeyAgree.doPhase(alicePubKey, true);
* At this stage, both Alice and Bob have completed the DH key
* agreement protocol.
* Both generate the (same) shared secret.
byte[] aliceSharedSecret = aliceKeyAgree.generateSecret();
int aliceLen = aliceSharedSecret.length;
byte[] bobSharedSecret = new byte[aliceLen];
int bobLen;
/* try {
// show example of what happens if you
// provide an output buffer that is too short
bobLen = bobKeyAgree.generateSecret(bobSharedSecret, 1);
} catch (ShortBufferException e) {
System.out.println(e.getMessage());
// provide output buffer of required size
bobLen = bobKeyAgree.generateSecret(bobSharedSecret, 0);
          if (!java.util.Arrays.equals(aliceSharedSecret, bobSharedSecret))
throw new Exception("Shared secrets differ");
//System.out.println("Shared secrets are the same");
// System.out.println("Return shared secret as SecretKey object ...");
// Bob
// Note: The call to bobKeyAgree.generateSecret above reset the key
// agreement object, so we call doPhase again prior to another
// generateSecret call
bobKeyAgree.doPhase(alicePubKey, true);
bobDesKey = bobKeyAgree.generateSecret("DES");
// Alice
// Note: The call to aliceKeyAgree.generateSecret above reset the key
// agreement object, so we call doPhase again prior to another
// generateSecret call
aliceKeyAgree.doPhase(bobPubKey, true);
aliceDesKey = aliceKeyAgree.generateSecret("DES");
* encrypt() - Alice encrypts, using DES in ECB mode
* and assigns it to the instance variable ds.
* @param String
* @returns String
          public String encrypt(String ClearText) throws Exception
     String CipherText=null;
               try{
               // byte[] iv = {(byte)0xFF, (byte)0xFF, (byte)0xFF, (byte)0xFF,(byte)0xFF, (byte)0xFF, (byte)0xFF, (byte)0xFF};
          Cipher aliceCipher = Cipher.getInstance("DES/ECB/PKCS5Padding");
     aliceCipher.init(Cipher.ENCRYPT_MODE, aliceDesKey);
               byte[] cleartext = ClearText.getBytes();
               //System.out.println("cleartext Array:"+ cleartext.size);
               byte[] ciphertext = aliceCipher.doFinal(cleartext);
// BASE64Encoder b64e = new BASE64Encoder();
               //CipherText = b64e.encode(ciphertext);
               CipherText = new String(ciphertext);
               }catch(Exception e){e.printStackTrace();}
     return CipherText;
* encrypt() - Bob Decrypts, using DES in ECB mode
* and assigns it to the instance variable ds.
* @param String
* @returns String
public String decrypt(String CipherText) throws Exception
String Recovered=null;
     try{
          // byte[] iv = {(byte)0xFF, (byte)0xFF, (byte)0xFF, (byte)0xFF,(byte)0xFF, (byte)0xFF, (byte)0xFF, (byte)0xFF};
// System.out.println("Length of String is:"+CipherText.length());
               Cipher bobCipher = Cipher.getInstance("DES/ECB/PKCS5Padding");
          bobCipher.init(Cipher.DECRYPT_MODE, bobDesKey);
               byte[] CipherTextBytes=CipherText.getBytes();
byte[] recovered = bobCipher.doFinal(CipherTextBytes);
               Recovered=new String(recovered);
          // System.out.println("Decryption:"+Recovered+"length:="+Recovered.length());
}catch(Exception e){e.printStackTrace();}
     return Recovered;
and i am using following logic to encrypt and decrypt
String MyPlainText ="sm_user=residential&csol_account=383784";
//String MyPlainText ="This is my message";
     System.out.println("\nPlain Text:="+MyPlainText+"\n\n");
try{
     DHEncryptDecrypt ed=new DHEncryptDecrypt();
String CipherText=(ed.encrypt(MyPlainText));
               BASE64Encoder b64e = new BASE64Encoder();
               String CipherText1 = b64e.encode(CipherText.getBytes());
System.out.println("\n\nUserInfo="+CipherText1);
     String DecryptedMessage=ed.decrypt(CipherText);
System.out.println("\n\nDecrypedMessage=:"+DecryptedMessage);
     }catch(Exception e){e.printStackTrace();}
and my java.security file in D:\ bea\jdk131_03\jre\lib\security
is changed to add the provider as
# List of providers and their preference orders (see above):
security.provider.1=sun.security.provider.Sun
security.provider.2=com.sun.crypto.provider.SunJCE
security.provider.3=com.sun.rsajca.Provider
# Class to instantiate as the system Policy. This is the name of the class
# that will be used as the Policy object.
policy.provider=sun.security.provider.PolicyFile
Pls help me to resolve the magic shown by these classes.....some time right and some time worng
mainly i need help in
Badpadding Exception and NosuchAlogorithm exception in weblogic
Thanks
And regards
Arati

replace all calls of getBytes() and new String(text) with the versions where you can state a charset: getBytes(charset), new String(text, charset). i use "iso-8859-1" as the charset.
this should at least fix your "Badpadding exception" problem (it did fix it for me).

How can i deal with java.security.AccessControlException?

Hi all, I need to implement JavaMail using Servlet and deploy throught J2EE deployment tool. But when i test out the servlet i will always encounter this exception thrown. How can i solve this?
java.security.AccessControlException: access denied (java.util.PropertyPermission * read,write)
This is the servlet i am testing. Please advise. Thanks in advance!
* @(#)JavaMailServlet.java 1.3 99/12/06
* Copyright 1998, 1999 Sun Microsystems, Inc. All Rights Reserved.
* This software is the proprietary information of Sun Microsystems, Inc.
* Use is subject to license terms.
import java.io.*;
import java.util.*;
import java.text.*;
import javax.servlet.*;
import javax.servlet.http.*;
import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.*;
* This is a servlet that demonstrates the use of JavaMail APIs
* in a 3-tier application. It allows the user to login to an
* IMAP store, list all the messages in the INBOX folder, view
* selected messages, compose and send a message, and logout.
* 
* Please note: This is NOT an example of how to write servlets!
* This is simply to show that JavaMail can be used in a servlet.
* 
* For more information on this servlet, see the
* JavaMailServlet.README.txt file.
* 
* For more information on servlets, see
* * http://java.sun.com/products/java-server/servlets/index.html
* @author Max Spivak
public class JavaMailServlet extends HttpServlet implements SingleThreadModel {
String protocol = "POP3";
String mbox = "INBOX";
* This method handles the "POST" submission from two forms: the
* login form and the message compose form. The login form has the
* following parameters: <code>hostname</code>, <code>username</code>,
* and <code>password</code>. The <code>send</code> parameter denotes
* that the method is processing the compose form submission.
public void doPost(HttpServletRequest req, HttpServletResponse res)
 throws ServletException, IOException {
// get the session
 HttpSession ssn = req.getSession(true);
 String send = req.getParameter("send");
String host = req.getParameter("hostname");
String user = req.getParameter("username");
String passwd = req.getParameter("password");
URLName url = new URLName(protocol, host, -1, mbox, user, passwd);
ServletOutputStream out = res.getOutputStream();
 res.setContentType("text/html");
 out.println("<html><body bgcolor=\"#CCCCFF\">");
 if (send != null) {
 // process message sending
 send(req, res, out, ssn);
 } else {
 // initial login
 // create
 MailUserData mud = new MailUserData(url);
 ssn.putValue("javamailservlet", mud);
 try {
 Properties props = System.getProperties();
 System.out.println("url");
 props.put("mail.smtp.host", host);
 Session session = Session.getDefaultInstance(props, null);
 session.setDebug(false);
 Store store = session.getStore(url);
 store.connect();
 Folder folder = store.getDefaultFolder();
 if (folder == null)
 throw new MessagingException("No default folder");
 folder = folder.getFolder(mbox);
 if (folder == null)
 throw new MessagingException("Invalid folder");
 folder.open(Folder.READ_WRITE);
 int totalMessages = folder.getMessageCount();
 Message[] msgs = folder.getMessages();
 FetchProfile fp = new FetchProfile();
 fp.add(FetchProfile.Item.ENVELOPE);
 folder.fetch(msgs, fp);
 // track who logged in
 System.out.println("Login from: " + store.getURLName());
 // save stuff into MUD
 mud.setSession(session);
 mud.setStore(store);
 mud.setFolder(folder);
 // splash
 out.print("<center>");
 out.print("");
 out.println("Welcome to JavaMail!</center>");
 // folder table
 out.println("<table width=\"50%\" border=0 align=center>");
 // folder name column header
 out.print("<tr><td width=\"75%\" bgcolor=\"#ffffcc\">");
 out.print("");
 out.println("FolderName</td> ");
 // msg count column header
 out.print("<td width=\"25%\" bgcolor=\"#ffffcc\">");
 out.print("");
 out.println("Messages</td> ");
 out.println("</tr>");
 // folder name
 out.print("<tr><td width=\"75%\" bgcolor=\"#ffffff\">");
 out.print("<a href=\"" + HttpUtils.getRequestURL(req) + "\">" +
 "Inbox" + "</a></td> ");
 // msg count
 out.println("<td width=\"25%\" bgcolor=\"#ffffff\">" +
 totalMessages + "</td>");
 out.println("</tr>");
 out.println("</table");
 } catch (Exception ex) {
 out.println(ex.toString());
 } finally {
 out.println("</body></html>");
 out.close();
* This method handles the GET requests for the client.
public void doGet (HttpServletRequest req, HttpServletResponse res)
 throws ServletException, IOException {
HttpSession ses = req.getSession(false); // before we write to out
ServletOutputStream out = res.getOutputStream();
 MailUserData mud = getMUD(ses);
 if (mud == null) {
 res.setContentType("text/html");
 out.println("<html><body>Please Login (no session)</body></html>");
 out.close();
 return;
 if (!mud.getStore().isConnected()) {
 res.setContentType("text/html");
 out.println("<html><body>Not Connected To Store</body></html>");
 out.close();
 return;
 // mux that takes a GET request, based on parameters figures
 // out what it should do, and routes it to the
 // appropriate method
 // get url parameters
 String msgStr = req.getParameter("message");
String logout = req.getParameter("logout");
 String compose = req.getParameter("compose");
 String part = req.getParameter("part");
 int msgNum = -1;
 int partNum = -1;
 // process url params
 if (msgStr != null) {
 // operate on message "msgStr"
 msgNum = Integer.parseInt(msgStr);
 if (part == null) {
 // display message "msgStr"
res.setContentType("text/html");
 displayMessage(mud, req, out, msgNum);
 } else if (part != null) {
 // display part "part" in message "msgStr"
 partNum = Integer.parseInt(part);
displayPart(mud, msgNum, partNum, out, res);
 } else if (compose != null) {
 // display compose form
 compose(mud, res, out);
} else if (logout != null) {
 // process logout
try {
mud.getFolder().close(false);
mud.getStore().close();
 ses.invalidate();
out.println("<html><body>Logged out OK</body></html>");
} catch (MessagingException mex) {
out.println(mex.toString());
 } else {
 // display headers
 displayHeaders(mud, req, out);
/* main method to display messages */
private void displayMessage(MailUserData mud, HttpServletRequest req,
 ServletOutputStream out, int msgNum)
 throws IOException {
 out.println("<html>");
out.println("<HEAD><TITLE>JavaMail Servlet</TITLE></HEAD>");
 out.println("<BODY bgcolor=\"#ccccff\">");
 out.print("<center>");
 out.println("Message " + (msgNum+1) + " in folder " +
 mud.getStore().getURLName() +
 "/INBOX</center>");
 try {
 Message msg = mud.getFolder().getMessage(msgNum);
 // first, display this message's headers
 displayMessageHeaders(mud, msg, out);
 // and now, handle the content
 Object o = msg.getContent();
 //if (o instanceof String) {
 if (msg.isMimeType("text/plain")) {
 out.println("<pre>");
 out.println((String)o);
 out.println("</pre>");
 //} else if (o instanceof Multipart){
 } else if (msg.isMimeType("multipart/*")) {
 Multipart mp = (Multipart)o;
 int cnt = mp.getCount();
 for (int i = 0; i < cnt; i++) {
 displayPart(mud, msgNum, mp.getBodyPart(i), i, req, out);
 } else {
 out.println(msg.getContentType());
 } catch (MessagingException mex) {
 out.println(mex.toString());
 out.println("</BODY></html>");
 out.close();
* This method displays a message part. <code>text/plain</code>
* content parts are displayed inline. For all other parts,
* a URL is generated and displayed; clicking on the URL
* brings up the part in a separate page.
private void displayPart(MailUserData mud, int msgNum, Part part,
 int partNum, HttpServletRequest req,
 ServletOutputStream out)
 throws IOException {
 if (partNum != 0)
 out.println("<hr>");
try {
 String sct = part.getContentType();
 if (sct == null) {
 out.println("invalid part");
 return;
 ContentType ct = new ContentType(sct);
 if (partNum != 0)
 out.println("Attachment Type: " +
 ct.getBaseType() + " ");
 if (ct.match("text/plain")) {
 // display text/plain inline
 out.println("<pre>");
 out.println((String)part.getContent());
 out.println("</pre>");
 } else {
 // generate a url for this part
 String s;
 if ((s = part.getFileName()) != null)
 out.println("Filename: " + s + " ");
 s = null;
 if ((s = part.getDescription()) != null)
 out.println("Description: " + s + " ");
 out.println("<a href=\"" +
 HttpUtils.getRequestURL(req) +
 "?message=" +
 msgNum + "&part=" +
 partNum + "\">Display Attachment</a>");
 } catch (MessagingException mex) {
 out.println(mex.toString());
* This method gets the stream from for a given msg part and
* pushes it out to the browser with the correct content type.
* Used to display attachments and relies on the browser's
* content handling capabilities.
private void displayPart(MailUserData mud, int msgNum,
 int partNum, ServletOutputStream out,
 HttpServletResponse res)
 throws IOException {
 Part part = null;
try {
 Message msg = mud.getFolder().getMessage(msgNum);
 Multipart mp = (Multipart)msg.getContent();
 part = mp.getBodyPart(partNum);
 String sct = part.getContentType();
 if (sct == null) {
 out.println("invalid part");
 return;
 ContentType ct = new ContentType(sct);
 res.setContentType(ct.getBaseType());
 InputStream is = part.getInputStream();
 int i;
 while ((i = is.read()) != -1)
 out.write(i);
 out.flush();
 out.close();
 } catch (MessagingException mex) {
 out.println(mex.toString());
* This is a utility message that pretty-prints the message
* headers for message that is being displayed.
private void displayMessageHeaders(MailUserData mud, Message msg,
 ServletOutputStream out)
 throws IOException {
 try {
 out.println("Date: " + msg.getSentDate() + " ");
Address[] fr = msg.getFrom();
if (fr != null) {
boolean tf = true;
out.print("From: ");
for (int i = 0; i < fr.length; i++) {
out.print(((tf) ? " " : ", ") + getDisplayAddress(fr));
tf = false;
out.println(" ");
Address[] to = msg.getRecipients(Message.RecipientType.TO);
if (to != null) {
boolean tf = true;
out.print("To: ");
for (int i = 0; i < to.length; i++) {
out.print(((tf) ? " " : ", ") + getDisplayAddress(to[i]));
tf = false;
out.println(" ");
Address[] cc = msg.getRecipients(Message.RecipientType.CC);
if (cc != null) {
boolean cf = true;
out.print("CC: ");
for (int i = 0; i < cc.length; i++) {
out.print(((cf) ? " " : ", ") + getDisplayAddress(cc[i]));
 cf = false;
out.println(" ");
 out.print("Subject: " +
 ((msg.getSubject() !=null) ? msg.getSubject() : "") +
 " ");
} catch (MessagingException mex) {
 out.println(msg.toString());
* This method displays the URL's for the available commands and the
* INBOX headerlist
private void displayHeaders(MailUserData mud,
 HttpServletRequest req,
ServletOutputStream out)
 throws IOException {
SimpleDateFormat df = new SimpleDateFormat("EE M/d/yy");
out.println("<html>");
out.println("<HEAD><TITLE>JavaMail Servlet</TITLE></HEAD>");
 out.println("<BODY bgcolor=\"#ccccff\"><hr>");
 out.print("<center>");
 out.println("Folder " + mud.getStore().getURLName() +
 "/INBOX</center>");
 // URL's for the commands that are available
 out.println("");
out.println("<a href=\"" +
 HttpUtils.getRequestURL(req) +
 "?logout=true\">Logout</a>");
out.println("<a href=\"" +
 HttpUtils.getRequestURL(req) +
 "?compose=true\" target=\"compose\">Compose</a>");
 out.println("");
 out.println("<hr>");
 // List headers in a table
out.print("<table cellpadding=1 cellspacing=1 "); // table
 out.println("width=\"100%\" border=1>"); // settings
 // sender column header
 out.println("<tr><td width=\"25%\" bgcolor=\"ffffcc\">");
 out.println("");
 out.println("Sender</td>");
 // date column header
 out.println("<td width=\"15%\" bgcolor=\"ffffcc\">");
 out.println("");
 out.println("Date</td>");
 // subject column header
 out.println("<td bgcolor=\"ffffcc\">");
 out.println("");
 out.println("Subject</td></tr>");
 try {
 Folder f = mud.getFolder();
 int msgCount = f.getMessageCount();
 Message m = null;
 // for each message, show its headers
 for (int i = 1; i <= msgCount; i++) {
m = f.getMessage(i);
 // if message has the DELETED flag set, don't display it
 if (m.isSet(Flags.Flag.DELETED))
 continue;
 // from
out.println("<tr valigh=middle>");
out.print("<td width=\"25%\" bgcolor=\"ffffff\">");
 out.println("" +
 ((m.getFrom() != null) ?
 m.getFrom()[0].toString() :
 "" ) +
 "</td>");
 // date
out.print("<td nowrap width=\"15%\" bgcolor=\"ffffff\">");
 out.println("" +
df.format((m.getSentDate()!=null) ?
 m.getSentDate() : m.getReceivedDate()) +
 "</td>");
 // subject & link
out.print("<td bgcolor=\"ffffff\">");
 out.println("" +
 "<a href=\"" +
 HttpUtils.getRequestURL(req) +
"?message=" +
i + "\">" +
((m.getSubject() != null) ?
 m.getSubject() :
 "No Subject") +
"</a>" +
"</td>");
out.println("</tr>");
 } catch (MessagingException mex) {
 out.println("<tr><td>" + mex.toString() + "</td></tr>");
 mex.printStackTrace();
 out.println("</table>");
 out.println("</BODY></html>");
 out.flush();
 out.close();
* This method handles the request when the user hits the
* Compose link. It send the compose form to the browser.
private void compose(MailUserData mud, HttpServletResponse res,
 ServletOutputStream out)
 throws IOException {
 res.setContentType("text/html");
 out.println(composeForm);
 out.close();
* This method processes the send request from the compose form
private void send(HttpServletRequest req, HttpServletResponse res,
 ServletOutputStream out, HttpSession ssn)
 throws IOException {
String to = req.getParameter("to");
 String cc = req.getParameter("cc");
 String subj = req.getParameter("subject");
 String text = req.getParameter("text");
 try {
 MailUserData mud = getMUD(ssn);
 if (mud == null)
 throw new Exception("trying to send, but not logged in");
 Message msg = new MimeMessage(mud.getSession());
 InternetAddress[] toAddrs = null, ccAddrs = null;
 if (to != null) {
 toAddrs = InternetAddress.parse(to, false);
 msg.setRecipients(Message.RecipientType.TO, toAddrs);
 } else
 throw new MessagingException("No \"To\" address specified");
 if (cc != null) {
 ccAddrs = InternetAddress.parse(cc, false);
 msg.setRecipients(Message.RecipientType.CC, ccAddrs);
 if (subj != null)
 msg.setSubject(subj);
 URLName u = mud.getURLName();
 msg.setFrom(new InternetAddress(u.getUsername() + "@" +
 u.getHost()));
 if (text != null)
 msg.setText(text);
 Transport.send(msg);
 out.println("<h1>Message sent successfully</h1></body></html>");
 out.close();
 } catch (Exception mex) {
 out.println("<h1>Error sending message.</h1>");
 out.println(mex.toString());
 out.println(" </body></html>");
// utility method; returns a string suitable for msg header display
private String getDisplayAddress(Address a) {
String pers = null;
String addr = null;
if (a instanceof InternetAddress &&
((pers = ((InternetAddress)a).getPersonal()) != null)) {
 addr = pers + " "+"<"+((InternetAddress)a).getAddress()+">";
} else
addr = a.toString();
return addr;
// utility method; retrieve the MailUserData
// from the HttpSession and return it
private MailUserData getMUD(HttpSession ses) throws IOException {
 MailUserData mud = null;
 if (ses == null) {
 return null;
 } else {
 if ((mud = (MailUserData)ses.getValue("javamailservlet")) == null){
 return null;
 return mud;
public String getServletInfo() {
return "A mail reader servlet";
* This is the HTML code for the compose form. Another option would
* have been to use a separate html page.
private static String composeForm = "<HTML><HEAD><TITLE>JavaMail Compose</TITLE></HEAD><BODY BGCOLOR=\"#CCCCFF\"><FORM ACTION=\"/servlet/JavaMailServlet\" METHOD=\"POST\"><input type=\"hidden\" name=\"send\" value=\"send\">JavaMail Compose Message<TABLE BORDER=\"0\" WIDTH=\"100%\"><TR><TD WIDTH=\"16%\" HEIGHT=\"22\"> To:</TD><TD WIDTH=\"84%\" HEIGHT=\"22\"><INPUT TYPE=\"TEXT\" NAME=\"to\" SIZE=\"30\"> (separate addresses with commas)</TD></TR><TR><TD WIDTH=\"16%\">CC:</TD><TD WIDTH=\"84%\"><INPUT TYPE=\"TEXT\" NAME=\"cc\" SIZE=\"30\"> (separate addresses with commas)</TD></TR><TR><TD WIDTH=\"16%\">Subject:</TD><TD WIDTH=\"84%\"><INPUT TYPE=\"TEXT\" NAME=\"subject\" SIZE=\"55\"></TD></TR><TR><TD WIDTH=\"16%\"> </TD><TD WIDTH=\"84%\"><TEXTAREA NAME=\"text\" ROWS=\"15\" COLS=\"53\"></TEXTAREA></TD></TR><TR><TD WIDTH=\"16%\" HEIGHT=\"32\"> </TD><TD WIDTH=\"84%\" HEIGHT=\"32\"><INPUT TYPE=\"SUBMIT\" NAME=\"Send\" VALUE=\"Send\"><INPUT TYPE=\"RESET\" NAME=\"Reset\" VALUE=\"Reset\"></TD></TR></TABLE></FORM></BODY></HTML>";
* This class is used to store session data for each user's session. It
* is stored in the HttpSession.
class MailUserData {
URLName url;
Session session;
Store store;
Folder folder;
public MailUserData(URLName urlname) {
 url = urlname;
public URLName getURLName() {
 return url;
public Session getSession() {
 return session;
public void setSession(Session s) {
 session = s;
public Store getStore() {
 return store;
public void setStore(Store s) {
 store = s;
public Folder getFolder() {
 return folder;
public void setFolder(Folder f) {
 folder = f;

You posted a thousand lines of badly-formatted code and didn't have the sense to say which one had the exception.
My guess is that it was this one:Session session = Session.getDefaultInstance(props, null);because that happened to me. I fixed it by calling getInstance instead of getDefaultInstance.
However if that isn't the problem, how about spending a few seconds to post a less useless question?

Java Security Error while Launching the Application through JNLP

Hi!,
I have a problem in launching my Application through JNLP. It is giving the Error dialog as "Unable to lauch application" with the dialog title as "Java Security Error".
I don't know why this problem is coming but when I have reset my profile on my system & then I tried to launch the same application & I got success.
Can anyone suggest me what was the problem?
Pradeep Gupta

hi,
usually it is the web dynpro launch system that is causing the issue, OR there is a misconfiguration in the backend like the tasks are set up with com.sap/esslea in the backend and the xml file is referencing sap.com <SWITCH>/esslea and the dynpro is showing this as not deployed.
Regards
Sharanya Rajagopal

Invalid Security role-name error in Web Project

Hi All,
I have imported a J2EE application project built in JBOSS into NWDS 7.1.
While building the project i get the following error
CHKJ3020E:Invalid Security role-name error: PEHNTAHO_ADMIN
This error directs me to the following code in web.xml
<security-constraint>
 <display-name>Default JSP Security Constraints</display-name>
 <web-resource-collection>
 <web-resource-name>Portlet Directory</web-resource-name>
 <url-pattern>/jsp/*</url-pattern>
 <http-method>GET</http-method>
 <http-method>POST</http-method>
 </web-resource-collection>
 <auth-constraint>
 <role-name>PEHNTAHO_ADMIN</role-name>
 </auth-constraint>
 <user-data-constraint>
 <transport-guarantee>NONE</transport-guarantee>
 </user-data-constraint>
 </security-constraint>
I have tried out the following things to resolve this issue :
1) Remove the role manually(as suggested by various people in other J2EE forums), but then some other error came in to picture
2)Then I added the following code in web.xml
<security-role>
 <role-name>PEHNTAHO_ADMIN</role-name>
 </security-role>
Then the above mentioned build error gets resolved, but then I get the following error while deploying the application.
Dec 3, 2007 12:59:21 AM /userOut/daView_category (eclipse.UserOutLocation) [Thread[Deploy Thread,5,main]] ERROR: Deploy Exception.An error occurred while deploying the deployment item 'sap.com_AnalyticsApp2EAR'.; nested exception is:
 java.rmi.RemoteException: class com.sap.engine.services.dc.gd.DeliveryException: An error occurred during deployment of sdu id: sap.com_AnalyticsApp2EAR
sdu file path: D:\usr\sap\CE1\J01\j2ee\cluster\server0\temp\tcbldeploy_controller\archives\191\AnalyticsApp2EAR.ear
version status: HIGHER
deployment status: Admitted
description:
 1. Error:
Cannot update application sap.com/AnalyticsApp2EAR. Reason: The application sap.com/AnalyticsApp2EAR will not be update, because its validation failed. Reason:
ERRORS:
Web Model Builder: com.sap.engine.frame.core.configuration.NameNotFoundException: The parameter/s in String "<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
 
</web-app>
" is/are not defined and could not be substituted., file: AnalyticsApp2.war#WEB-INF/web.xml, column 0, line 0, severity: error
WARNINGS:
Web Model Builder: Following tests could not be executed because of failed precondition test "Web Model Builder" : Implicit Constraints Test, JSF Application Test, Mapping Test, Web File Existence Test, Web Class Existence Test, Security Role Test, file: AnalyticsApp2.war, column -1, line -1, severity: warning
3) I had also added the following code in web-j2ee-engine.xml
<security-role-map>
 <role-name>PEHNTAHO_ADMIN</role-name>
 <server-role-name>all</server-role-name>
 </security-role-map>
but still i get the same deployment error.
Please help me in resolving this problem.
Can anybody tell me the use of role "PEHNTAHO_ADMIN"?
Thanks and Regards,
Sruti

Hi Malathy,
Once the users are created in Authentication Provider, and once the roles are created in Weblogic Server, You just have to map users to roles in Jazn-data.xml.
Could you please let us know you created a roles named users in WLS ?
Thanks & Regards,
Murali.
============

BPEL Call synchronous ESB java.security.PrivilegedActionException

There is three project :
BPEL A : synchronous process , reply fault
ESB1 : Exxcetion type : synchronous, use BPEL A as SOAP service
BPEL B : synchronous process ,call ESB1
When invoke ESB1 in em , it works good.
But when execute BPEL B in BPELConsole , the following fault occured :
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
- <part name="summary">
<summary>
exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
</summary>
</part>
</remoteFault>
What's wrong with this ?
Anyone help me ?

There is three project :
BPEL A : synchronous process , reply fault
ESB1 : Exxcetion type : synchronous, use BPEL A as SOAP service
BPEL B : synchronous process ,call ESB1
When invoke ESB1 in em , it works good.
But when execute BPEL B in BPELConsole , the following fault occured :
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
- <part name="summary">
<summary>
exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
</summary>
</part>
</remoteFault>
What's wrong with this ?
Anyone help me ?

Java Security Dialog Name field

Similar Messages

Maybe you are looking for