Java Server settings location in Config

Hi
Where do I find Java Server settings parameters like (-Xjvm:j9vm23,Xgcpolicy:gencon,Xms2048m etc) in Config tool..(Please note I need this for PI7.11 Config tool)
Thanks
Rajesh

Hi Rajesh,
Please find location in the config tool for updating Java System Properties : [Click Here|http://help.sap.com/saphelp_nwce711/helpdata/en/48/bdba8f50dd35bce10000000a42189d/content.htm]
Hope this will helps you.
Thanks
Arun Jaiswal

Similar Messages

Java server does not start; config tool

Hi All,
I am fairly new to SAP BASIS setup. I have installed IDES ECC 6.0 on Oracle(Win2003 as a guest on VMWare).
At the time of installation the install program installed a part of the Oracle database files on an external harddisk.
The ABAP server starts normally and I am able to connect to it without any issues. However, the disp+work.EXE always stays on yellow with a message : J2EE status info unavailable.
When I tried to connect to the database through configtool to check the setup of the parameter I am unable to connect to the database I get the following error:
Error occurred while working with Configuration(Scanning). Msg:Error while connecting to DB.
and the system.log shows
java.sql.SQLException: ORA-00376: file 102 cannot be read at this time and then ORA-01110: data file 102: "<location>".
Although the file is present at the location mentioned. This is the location of the external hard drive which is available with the correct drive letter. Is there anyway this can be resolved?
I would definitely like to get the Java server up and running.
All help is highly appreciated guys! Thanks.
Regards,
Manish

Hey Sunny, you are star!!
This note helped me resolve this issue!!
Now my Java server is also up and running I have greens!!
The issue with Oracle not available was resolved by the below:
/message/1824609#1824609 [original link is broken]
Re: ORA-01034: Oracle not available after service restart
Posted: Aug 16, 2007 12:28 PM in response to: user588442 in response to: user588442
One thing to check. If the Oracle service starts, but you get the "Connected to idle instance" is in the Registry on windows boxes.
Start->Run-> type in REGEDIT and hit return.
In the Registry editor, navigate to HKEY_LOCAL_MACHINEsoftwareOracle
Under this key, you should have a key like: Ora_db10g_Home1, or whatever you called your ORACLE_HOME. Under there, you should see: ORA_<SID>_AUTOSTART. Make sure that is set to TRUE. This starts the actual instance when the service starts. Otherwise, if set to FALSE, the service will start, but the database is "idle"."
Thank you.
Appreciate all your help man...
Manish
ERP, EAI, BI

Where to increase Java Heap settings for Admin and Managed Server.

Hello Experts
I am having issue with increasing the JVM memory arguments for the Admin and Managed Servers. I have tried in a couple of places to increase the memory arguments (Xms and Xmx to 1024m)but its not taking effect. When I start the Admin Server and Managed server , I do not see the increased Heap settings. Here is what I see -
"Starting WLS with line : /oracle/app/bi/Oracle_BI1/jdk/java -server - Xms256m -Xmx512m -XX:MaxPermSize=512m"
I have the following memory arguments in the setDomainEnv.sh located in <DOMAIN_HOME>/bin
XMS_SUN_64BIT ="2048"
export XMS_SUN_64BIT
XMX_SUN_64BIT="2048"
export XMX_SUN_64BIT
Looks like this did not work , so I added an entry in the setOBIDomainEnv.sh file hoping to increase the Java memory , but that does not work either. Below is from setOBIDomainEnv.sh file -
Really, trying to understand where/how the JVM settings are controlled from. Please guide me.
Appreciate your time.
Rakesh

Under setobidomainenv.sh you will also find the admin server tag's so you need to increase the jvm parameters in there too. Depending upon your java vendor and bit version(Sun/Oracle/IBM/HP and 32-bit vs 64-bit ) So change accordingly
eg:
if server group is not obi then we can assume that it is Admin Server
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
# -UseSSE42Intrinsics required for server running EM
if [ "${JAVA_USE_64BIT}" = "true" ] ; then
# Admin Server memory args for 64-bit Sun JVM
SERVER_MEM_ARGS="-Xms256m -Xmx1024m -XX:MaxPermSize=512m -XX:-UseSSE42Intrinsics"
export SERVER_MEM_ARGS
similarly in setdomain.sh you will find the args as below:
XMX_SUN_64BIT="512"
export XMX_SUN_64BIT
XMS_SUN_64BIT="256"
export XMS_SUN_64BIT
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
WLS_MEM_ARGS_64BIT="-Xms256m -Xmx512m"
export WLS_MEM_ARGS_64BIT
WLS_MEM_ARGS_32BIT="-Xms256m -Xmx512m"
export WLS_MEM_ARGS_32BIT
after setting them just execute them ./setdomain.sh and ./setobidomainenv.sh and then try to start the admin and managed servers and see the process running with the updated values.

Sun Java System Application Server installation location on windows

Hi there...
I'm just doing the "Your First Cup: An Introduction to the Java EE Platform" tutorial for the first time. I'm trying to add the Sun Java System Application Server in NetBeans IDE. It's asking me to select the Platform Location, and I have no idea where that is. No help instructions I've found say where it normally gets installed, and I've found now mention of it on the web.
Can anyone tell me the location where this is supposed to be located? I HAVE installed the Java EE SDK 5 for Windows. The location it offers as a default is "C:\Program Files\glassfish-v2ur2\", but there is a red message at the bottom of the dialog that reads "Provide a valid Application Server Installation Location for 'Sun Java System App...". The Register Local Default Domain drop-down box has not options to select, either.
I would try and search some more, but I just don't know what to search for. If anyone can offer any insight into this, I appreciate it.
Thanks a ton!!!
Orion Carrier

I`ve posted a shorter version of the question in the hopes of getting a timely answer. Thanks

Thunderbird V3 Menu location: Edit | Account Settings | account name | Server Settings not listed in edit menu?

Thunderbird v 3 help info is different than what actually is shown in the edit option list. Menu location: Edit | Account Settings | <account name> | Server Settings
Looking for ISP setting that instructs ISP(rr) to keep emails on serer until erased by user. This setting was in earlier versions of Thunderbird. This settings is used to download email to other user computers. When user's computer breaks down user has to reload email onto new setup.
Scenario is to go to Thunderbird V 3 Edit --> Account Settings and discover this option no longer exists. See earlier version where you can go to Account Settings and select email to be left on server for optional number of days or until erased by user.
Thanks for help,
Bob

This is my problem too. I don't usually need to edit settings but yahoo or gmail have had temporary problems with their smtp servers, when they do I can simply go to account settings and change from one to the other. Now when I open the account settings window and left or right click on ANY account or setting for an account in the left tree I get the error window with this message:
"The Local Directory path "C:\Users\Len\AppData\Roaming\Thunderbird\Profiles\dlcdrtl6.default\Mail\Local Folders" is not suitable for message storage. Please choose another directory."
Clicking OK in the window brings up another message window with the same message as above:
"An account with this name already exists. Please enter a different account name."
I cannot exit the account settings box by clicking OK. I need to click cancel. This effectively makes it impossible to change any account settings. This worked a few months ago as I switched smtp servers when gmail had problems, now I'm screwed if I need to.
This is a problem with one of the new versions it should be marked critical as account settings need be configurable and I don't see any workaround like there is for pasting links.

Can't save location for Trash at Server Settings (IMAP setting).

Hi,
I'd like to set a folder (one under an account name) to move messages to when deleting messages with IMAP.
I can't select Trash under an account name at Server Settings. I can only select Trash under "Inbox" under the account name.
I find that the folder settting was not saved at all. Folders settings for sent messages and drafts are OK.
How can I save a folder setting (one under an account name) for deleted messages ?
I guess this situation results to 2 Trashes (one under the account name and oner under "Inbox" under the account name). In fact, I have a trouble deleting Trash under "Inbox" under the account name.
Thanks in advance for any advices or clues for the solution or workaround.

(addition to the question)
To be exact, folder selection pull-down menu doesn't start with the account name, rather, start with "Inbox", therefore, I can only choose Trash under "Inbox".

Java Server stopped -11113 - Start of UME service failed

Hi experts,
I've recently been deploying via JSPM the latest component versions for my recently upgraded netweaver system (7.0 EHP1 on Windows with MaxDB). Part way through I received errors and now the Java server is unable to start.
Below is some of the trace from "std_server0.out". I double checked the settings in the config tool and double checked the users in the ABAP system (SAPJSF and J2EE_GUEST), and everything seems to be fine, but I'm not an SAP J2EE expert so its very possible that I've overlooked something.
I've looked through the forums and for the most part people with this problem fixed it by unlocking SAPJSF, but I don't have that problem.
Any assistance is much appreciated. If more of this trace or data from another log file would help please let me know.
Cheers,
JB
70.190: [GC 70.190: [DefNew: 108794K->26118K(131328K), 0.1303850 secs] 108794K->26118K(1004800K), 0.1304744 secs]
Dec 10, 2009 7:40:56 PM         com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_65] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: "CPIC-CALL: CMRCV on convId: 96069543
LOCATION    CPIC (TCP/IP) on local host with Unicode
ERROR       illegal parameter value ( function=SAP_CMTIMEOUT2 /
            parameter=conversation_ID / value=96069543 )
TIME        Thu Dec 10 19:40:56 200
RELEASE     701
COMPONENT   CPIC (TCP/IP) with Unicode
VERSION     3
RC          769
MODULE      r3cpic.c
LINE        7341
COUNTER     5
". This message is critical if it appears during the startup of the AS Java.
Dec 10, 2009 7:40:56 PM ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_65] Fatal:
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: CPIC-CALL: CMRCV on convId: 96069543
LOCATION    CPIC (TCP/IP) on local host with Unicode
ERROR       illegal parameter value ( function=SAP_CMTIMEOUT2 /
            parameter=conversation_ID / value=96069543 )
TIME        Thu Dec 10 19:40:56 200
RELEASE     701
COMPONENT   CPIC (TCP/IP) with Unicode
VERSION     3
RC          769
MODULE      r3cpic.c
LINE        7341
COUNTER     5
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:83)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:156)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: CPIC-CALL: CMRCV on convId: 96069543
LOCATION    CPIC (TCP/IP) on local host with Unicode
ERROR       illegal parameter value ( function=SAP_CMTIMEOUT2 /
            parameter=conversation_ID / value=96069543 )
TIME        Thu Dec 10 19:40:56 200
RELEASE     701
COMPONENT   CPIC (TCP/IP) with Unicode
VERSION     3
RC          769
MODULE      r3cpic.c
LINE        7341
COUNTER     5
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:440)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
     at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
     ... 6 more

Something that seemed odd in the error was: "200 RELEASE 701 COMPONENT CPIC (TCP/IP) with Unicode VERSION 3 RC 769 MODULE r3cpic.c LINE 7341 COUNTER 5"............So I updated the kernel and now everything works..
So for anyone with similar data in the trace updating kernel might be an option.
Cheers,
JB

Ruleset webservice: error during deployment EAR file on the java server

Hi,
I want to create a webservices for a ruleset which i have created with the rules composer (NWDS).
During this proces, the following problem occurs: after creating a ruleset and the EAR file with the Web Service Generation Tool, i wanted to deploy this file on the java server for creating a webservices. During deployment, I get the following warning with no results:
<h5>
            S U M M A R Y
~~~~~~~~~~~~~~~~~~~
Successfully deployed:           0
Deployed with warnings:           1
Failed deployments:                0
~~~~~~~~~~~~~~~~~~~
1. File:C:\Documents and Settings\Martin Gerritsen\Desktop\Webservices\DeclaratieCheckRulesetEAR.ear
     Name:DeclaratieCheckRulesetEAR
     Vendor:sap.com
     Location:localhost
     Version:2008.03.12.12.02.09
     Deploy status:Warning
     Version:NEW
     Description:
          1. Warning occurred on server 1573750 during deploy sap.com/DeclaratieCheckRulesetEAR : Web Class Existence Test: The servlet "GenericWS" must implement "javax.servlet.Servlet"., file: DeclaratieCheckRulesetWEB.war#WEB-INF/web.xml, column 0, line 0, severity: warning
          2. Exception has been returned while the [sap.com/DeclaratieCheckRulesetEAR] was starting. Warning/Exception :[
][[ERROR CODE DPL.DS.6193] Error while ; nested exception is:
     com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: [server ID 1573750:[ERROR CODE DPL.DS.5035] Application [sap.com/DeclaratieCheckRulesetEAR] cannot be started. Reason: it has hard reference to resource [tcbrmsfacade] with type [application], which is not active on the server.
Hint: 1) Is referred resource deployed? 2) Is referred resource able to start?
           -> [ERROR CODE DPL.DS.5082] Exception while [validating application sap.com/tcbrmsfacade.
     The sap.com/tcbrmsfacade application was processed from [EJBContainer] containers, but none of them returned information about deployed components.
     The registered containers in this moment were [CTCContainer, MDRContainer, com.sap.security.ume, developmentserver, SCA Composites Container, com.sap.security.login-modules, app_libraries_container, Cache Configuration Upload, servlet_jsp, dbcontentcontainer, connector, Cluster File System, BRMS_Content_Archive, JMSConnector, MigrationContainer, Galaxy_Content_Archive, Monitoring Configurator, dbschemacontainer, appclient, orpersistence, PortalRuntimeContainer, JDBCConnector, EJBContainer, metamodelrepository, webservices_container, scheduler~container, ConfigurationsContainer, Content Container].
     Possible reasons :
     1.Empty or incorrect application, which is not recognized by registered containers.
     2.An AS Java service, which is providing a container, is stopped or not deployed.
     3.The containers, which processed it, are not implemented correctly, because the application was deployed or started initially, but containers didn't return information about deployed components in the application deployment info].
server ID 1573750:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5035] Application [sap.com/DeclaratieCheckRulesetEAR] cannot be started. Reason: it has hard reference to resource [tcbrmsfacade] with type [application], which is not active on the server.
Hint: 1) Is referred resource deployed? 2) Is referred resource able to start?
     at com.sap.engine.services.deploy.server.ReferenceResolver.checkApplicationStatus(ReferenceResolver.java:871)
     at com.sap.engine.services.deploy.server.ReferenceResolver.processReferenceToApplication(ReferenceResolver.java:848)
     at com.sap.engine.services.deploy.server.ReferenceResolver.processMakeReference(ReferenceResolver.java:575)
     at com.sap.engine.services.deploy.server.ReferenceResolver.beforeStartingApplication(ReferenceResolver.java:489)
     at com.sap.engine.services.deploy.server.application.StartTransaction.beginCommon(StartTransaction.java:169)
     at com.sap.engine.services.deploy.server.application.StartTransaction.begin(StartTransaction.java:134)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:493)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:544)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:286)
     at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:555)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:197)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:358)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3421)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3407)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3297)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3269)
     at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:105)
     at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:78)
     at com.sap.engine.services.dc.cm.deploy.impl.LifeCycleManagerStartVisitor.visit(LifeCycleManagerStartVisitor.java:34)
     at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:83)
     at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcessLCMDeplItem(DefaultDeployPostProcessor.java:91)
     at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcess(DefaultDeployPostProcessor.java:61)
     at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doPostProcessing(DeployerImpl.java:862)
     at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.performDeploy(DeployerImpl.java:810)
     at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doDeploy(DeployerImpl.java:640)
     at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:359)
     at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:248)
     at com.sap.engine.services.dc.cm.deploy.impl.DeployerImplp4_Skel.dispatch(DeployerImplp4_Skel.java:897)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:355)
     at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:69)
     at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:67)
     at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:41)
     at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:971)
     at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:57)
     at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:55)
     at com.sap.engine.core.thread.execution.Executable.run(Executable.java:109)
     at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
Caused by: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5082] Exception while [validating application sap.com/tcbrmsfacade.
     The sap.com/tcbrmsfacade application was processed from [EJBContainer] containers, but none of them returned information about deployed components.
     The registered containers in this moment were [CTCContainer, MDRContainer, com.sap.security.ume, developmentserver, SCA Composites Container, com.sap.security.login-modules, app_libraries_container, Cache Configuration Upload, servlet_jsp, dbcontentcontainer, connector, Cluster File System, BRMS_Content_Archive, JMSConnector, MigrationContainer, Galaxy_Content_Archive, Monitoring Configurator, dbschemacontainer, appclient, orpersistence, PortalRuntimeContainer, JDBCConnector, EJBContainer, metamodelrepository, webservices_container, scheduler~container, ConfigurationsContainer, Content Container].
     Possible reasons :
     1.Empty or incorrect application, which is not recognized by registered containers.
     2.An AS Java service, which is providing a container, is stopped or not deployed.
     3.The containers, which processed it, are not implemented correctly, because the application was deployed or started initially, but containers didn't return information about deployed components in the application deployment info].
     at com.sap.engine.services.deploy.server.utils.ValidateUtils.missingDCinDIValidator(ValidateUtils.java:80)
     at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:158)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:502)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:544)
     at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyLocal(StartTransaction.java:477)
     at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:433)
     at com.sap.engine.services.deploy.server.application.StartTransaction.prepareLocal(StartTransaction.java:193)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:591)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:202)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesLocalAndWait(ParallelAdapter.java:367)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.regularStartApplicationLocalAndWait(DeployServiceImpl.java:3218)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationLocalAndWait(DeployServiceImpl.java:3210)
     at com.sap.engine.services.deploy.server.ReferenceResolver.checkApplicationStatus(ReferenceResolver.java:863)
     ... 36 more
Result
Status:Warning
</h5>
Development Infrastructure:
- development configuration: local development
- development configuration: saptest (SAP NetWeaver CE 7.1 EHP1)
Before I created the EAR file with the Web Service Generation Tool, I have carried out the following steps:
- Created a ruleset (including two rules and one decision table) (development configuration: saptest)
- Build and deploy the ruleset on the java server...
- Created a dummy web module (development configuration: local development)
- Added 3 dependencies (references) to the dummy web module:
- References 1: enginee.jee5.facade (no selection on design time, deploy time or runtime)
- References 2: tc/bl/logging/api (selection on design time, deploy time and runtime)
- References 3: tc/brms/ facade (selection on design time, deploy time and runtime)
- Dummy web module -> sync used DC's
- Build dummy web module
After that I started the Web Service Generation Tool and created the EAR file....
1) NWDS -> window -> show view -> others -> deploy view -> deploy view
2) Added the EAR file to External Deployable Archives
3) deployed the file to the java server... then the warning occurs...
How can I resolve this error?
<h5>Application [sap.com/DeclaratieCheckRulesetEAR] cannot be started. Reason: it has hard reference to resource [tcbrmsfacade] with type [application], which is not active on the server.
Hint: 1) Is referred resource deployed? 2) Is referred resource able to start...</h5>
And...
<h5>[ERROR CODE DPL.DS.5082] Exception while [validating application sap.com/tcbrmsfacade.
     The sap.com/tcbrmsfacade application was processed from [EJBContainer] containers, but none of them returned information about deployed components.</h5>
Can somebody help me with this problem?
Kind regards,
Martin Gerritsen

Hello Martin Gerritsen,
This is Arti from the PM team.
It seems to me that the brms facade has not yet started in your application server. You can check whether it has started or not by doing the following -
You need to access the JavaEE Applications running on your AS. To do this -
1. Open the nwa portal
2. Navigate to Operations Management > Systems > Start & Stop > Java EE Applications
3. Search for the brms related applications available on the server.
In case the applications have not yet been started, please try to manually start them. If you still have problem in starting the BRMS facade please contact me.
I will send across to you a fresh set of SCAs which you can deploy into your server to resolve this issue.
Regards,
Arti

Can't override DNS Server settings - can only append!

See this thread for a similar question:
http://discussions.apple.com/thread.jspa?messageID=3555096
I have also filed this with Apple (Problem ID 5159216). Here is the text of the report (with a few bits removed - not crucial to understanding the report).
If anyone has suggestions/clues to resolve, please advise. Thanks!
Summary:
This problem concerns AirPort Extreme (802.11n) at revision 7.1. I will summarize with a comparison between AirPort and MacOS X.
MacOS X and Airport Extreme (referred herein as "AE") both permit editing of DNS server settings whether in DHCP or Manual mode.
When MacOS X DNS server settings are set manually by the end-user, the new server IPs are used (good). When AE's DNS server settings are overridden by the end-user, the new server IPs are NOT used (not good)! Rather, the DHCP-supplied DNS server always pre-empts whatever is given in the AE Configuration UI.
Steps to Reproduce:
1. Using AirPort Extreme (802.11n) at revision 7.1 and MacOS 10.4.9 on a MacBook Pro (Core 2 Duo). The AE has been previously configured for IPv4 using DHCP and the MacBook is successfully connected and resolving domain names through the AE.
2. Visit "Apple Menu > Location > Network Settings" and check the AirPort TCP/IP settings. For purposes of this test, make sure the "DNS Servers" field is EMPTY so MacOS X defaults to the AE's DNS settings, then close System Preferences.
3. Run "AirPort Utility" (the newer version, not "Airport Admin Utility") and configure the AE under test. Pick the "Internet" icon in the toolbar and note the Internet Connection settings.
4. In this test, Configure IPv4 is set to "DHCP" and the DNS Server(s) field contains two DNS IPs assigned by the Internet Service Provider. In my case that's Cablevision's Optimum Online service. You may or may not see IP addresses here, but in my case they are visible.
5. As the DNS Server(s) are editable, and they both show ISP-supplied addresses, they can be changed to whatever alternate IPs you wish. For instance, change them to these alternate DNS IPs from OpenDNS.com: 208.67.222.222 and 208.67.220.220. (You could use any alternate set of IPs but for the purpose of this test use the OpenDNS IPs.) Update the AE and restart.
(For additional reference, http://www.opendns.com/start/airport.php shows instructions for the older AirPort Admin Utility, but the concept is exactly the same.)
6. Normally you shouldn't have to restart the MacBook Pro since we're just using the AE settings, but go ahead and do that just to be consistent with this test.
Expected Results:
Now for the moment of truth! We want to verify that we're using the OpenDNS IPs for our DNS Servers. One nice feature OpenDNS has is automagic redirection for certain domain name typos.
Here's an example. Drop to shell (Applications > Utilities > Terminal) and try this command (excluding the $ prompt, natch):
$ dig craigslist.og
The "og" typo is deliberate. We really want to go to craigslist.org. If you're using the new OpenDNS IPs, you will STILL get an Address (A) record with an IP like so:
;; ANSWER SECTION:
craigslist.og. 0 IN A 208.69.32.130
If you had entered "craigslist.og" in Safari, you would end up at 208.69.32.130 (an OpenDNS server) and then redirected to craigslist.org.
Actual Results:
Alas, that's not what happens! Instead, you get NO IP address, like so:
;; QUESTION SECTION:
;craigslist.og. IN A
This means we're not actually using the OpenDNS IPs. What's happening?
To find out, I spoke with the AirPort support group (Case # xxx-xxx-xx). I learned that, despite being allowed to edit and override the IP addresses provided via DHCP, the AE still uses the DHCP-provided DNS server if available.
Again, the user interface suggests that I'm allowed to override the DHCP-provided DNS IPs as shown in the UI. Even though I can do this, the AirPort will still keep note of any DHCP-provided DNS Server IPs and use those first.
True, I can switch to Manual network settings (and then my own DNS Server IPs take effect). Of course this is problematic when the ISP renews my IP address (which it does from time to time).
Another workaround is to use the "DNS Servers" settings noted in step 2 (above). However this is also problematic if I want to keep my network settings simple. It requires a "Home Network" location and an "Office" location. Still not preferable, but it's a workaround.
Regression:
n/a
Notes:
I would like AirPort's DNS settings to be overridden in the same way OS X allows DNS settings to be overridden. The user interfaces suggest this is possible but it is not. It's only possible in the OS X case. Having the same flexibility on the AirPort would be most welcome.

Afraid of the answer...sheesh...you must be a child. This has nothing to do with masquerading anything. The issue being discussed here is that people want to manually assign a dns server address via the new AEBS, while maintaining DHCP for IP address assignments through their ISP. For example, I would like to have opendns.com take care of all dns addressing at the router level, even though I have "Configure IPv4" set to "Using DHCP". If you do not understand why one would want to use something like opendns.com, please visit their website and enlighten yourself. The fact that the dns server address fields are editable when set to "Using DHCP" leads one to believe that you can manually assign a dns server in this configuration; however, under firmware 7.1.1, you still cannot. The previous iteration of the airport hardware can do it, as can nearly any router you pull off the shelf. In addition, this is something that can easily be done at the individual-computer level in OS X; however, many people would prefer to administer their network at the router level. That is the issue being discussed here. Either you can't read or you are purposely derailing the thread.
iMac 24" Mac OS X (10.4.9)

Error in Java Server Proxy in PI 7.1

Hi Gurus,
Can you please help me whether for Java server Proxies ,registration of interfaces are required or not in PI 7.1? I am using one synchronus interface(stateless).I have developped the proxy by connecting the ESR from NWDS and generating the Java skeleton from that interface.It is deployed and I tested the WSDL also after creating the service endpoint.It is running fine.
But while trying to use that proxy in an end-to-end scenario and triggering the msg from RWB->integration engine,even after registering it is giving the error "Cannot locate proxy bean localejbs/sap.com/JavaProxyServer/CalculatorImplBean"
Is it also requirred in PI 7.1 to register the interface?If not,the what should be the next step?
Thanks,
Jaydeep

Hi,
I am working on java proxy PI7.1.
I have follwed the steps provided in the below link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/508bb504-87cf-2c10-2aaf-f3a5df75e651?quicklink=index&overridelayout=true
I have Generates an outbound JAX-WS proxy based on the WSDL document.
And i didnt get the further steps.
Please advice me how to deploy the java proxie.
Thanks,
Sabitha

Displaying a picture or image in a java server page

I am using tomcat to load my java server pages. I need to display a picture in the page. Can somebody help?

The images are not located on my site, or computer, but rather they are located on different websites. This is what the browser recieves when the jsp runs:
<IMG SRC="http://www.thesite.com/images/theimage.gif"/>
and the site that is running the JSP is:
www.mysite.com/jsp/PicPage.jsp
Is this what you think maybe happening when the browser tries to process the linked image:
www.mysite.com/images/theimage.gif
I don't really understand the nuances of HTML, but if I specify a web address completely in the HTML then wouldn't that specified website be queried for the pictures by the web browser?
Thank you for any help you can provide.
John

Exception using fault message in java server proxy.

Hi All,
I am trying to use Fault message inside my server proxy code in Asynchronous java server proxy. I am referring the below mentioned link :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d06315a6-e66e-2910-039c-ba8bbbd23702?quicklink=index&overridelayout=true
I successfully deployed my SDA file but while running the scenario(http-XI-ftp in PI7.11) i am getting the folowing exception under MDT:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing inbound message. Exception: Cannot locate proxy bean ServerProxyFTTest3.
I am using the following library refernces under application-j2ee-engine.xml file: com.sap.aii.af.sdk.lib, com.sap.aii.proxy.svc, com.sap.xi.util.misc,com.sap.guid,com.sap.exception all of type "weak".
I have checked almost all the forums related to fault messages in asynchronous java server proxy but couldn't find much help.
Request you all to help me.
Thanks
Amit

Hi Rajesh,
I am deploying my SDA file on Non Central Adapter Engine.
I have also registered my interface using:
http://ISVSAPPISB:51000/ProxyServer/register?ns=http://infosys.com/poc&interface=SI_Proxy_IA&bean=localejbs/ServerProxyFTTest3&method=sIProxyIA
But still i ma getting the same exception.
Hi Gabriel,
I implemented my scenario using the same. But in addittion to the librarry referneces mentioned over there i have added one more refrence in it "com.sap.exception" of type "weak". My structure is like this:
<?xml version="1.0" encoding="UTF-8"?>
<application-j2ee-engine xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="application-j2ee-engine.xsd">
<reference reference-type="weak">
<reference-target provider-name="sap.com" target-type="library">com.sap.aii.af.sdk.lib</reference-target>
</reference>
<reference reference-type="weak">
<reference-target provider-name="sap.com" target-type="service"> com.sap.aii.proxy.svc</reference-target>
</reference>
<reference reference-type="weak">
<reference-target provider-name="sap.com" target-type="library">com.sap.xi.util.misc</reference-target>
</reference>
<reference reference-type="weak">
<reference-target provider-name="sap.com" target-type="library">com.sap.guid</reference-target>
</reference>
<reference reference-type="weak">
<reference-target provider-name="sap.com" target-type="library">com.sap.exception</reference-target>
</reference>
</application-j2ee-engine>
Please help.
Thanks
Amit

How do I set a breakpoint in a Java Server page (.jsp)?

I have set up an application for remote debugging and am able to connect to it from JDeveloper. When the code execution comes to breakpoints that I have set in java (.java) files they work and the application stops so I can debug etc.
This also applies to breakpoints set in java code that is called from Java Server pages.
However if I set breakpoints directly in a java server page whether it is in html code or in java code (such as scriplets) the execution does not stop and the breakpoints are ignored.
Why? Is there some extra thing I have to do? I have tried in Project Properties/Run/Debug/Profile/Edit/Launch Settings to choose server as Virtual Machine for instance but that does not change anything.
Comment. I do not know if this is of interest but I am going to add some java server pages to an application and they are defined in a directory like this:
. . . src\org\yawlfoundation\yawl\resourcing\jsf\jsp
but when the tomcat deploys the .war file they end up here:
. . . apache-tomcat-6.0.18\webapps\resourceService
As I can find no package declaration in a .jsp file this should not matter but I mention it anyway.
Edited by: user10477024 on Nov 25, 2008 5:32 AM

Hi user10477024,
thanks for explaining your background on what you are trying to do and I do understand the approach you are taking. Unlike user10689900's completely random post.
I've tried to convey why there is no support for JSP debugging in JDev, but again the main reason is that the current frameworks do not code Java directly into a JSP. The JSP is purely used to position the components on the page aiding visual design and real Java classes in tag libs do the rest.
So the evolution has been:
Servlets (Java classes writing HTML logic and intermingling presentation and business logic)
JSP 1.0 JSP (HTML looking) files where you can add scriptlets enclosed in <% ... %> <- you are here
JSP 1.1 Introduction of Tags and Tag libraries, tag libraries are true java classes and the JSP controls layout and simpler more elegant design.
Really JSP 1.1 is all about building reusable components together in tag libraries that can be reused across pages and improving design by not mixing presentation and business logic code together.
If I had inherited something as you have, my advice (if you can) would be to code up some tag libraries because it would be a good learning experience and would be very helpful for moving to more advanced frameworks like JSF.
regards,
Brenden

Java Server Proxy---Deployment error?

I am trying the scenario from this blog
/people/rashmi.ramalingam2/blog/2005/06/25/an-illustration-of-java-server-proxy
I am getting deployment error
May 30, 2006 1:39:34 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[003]Deployment aborted
Settings
SDM host : sapep
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/ADMINI1/LOCALS~1/Temp/temp57679JPS_EAR.ear
Deployment exception : Server sapep did not accept login request as apiadmin on port 50018 - CmdXmlFactory could not find Top Element within String: "null".
Inner exception was :
Server sapep did not accept login request as apiadmin on port 50018 - CmdXmlFactory could not find Top Element within String: "null".
Help me
Thanks

Hi Saru,
It seems u dont have the correct sdm password or someone has changed the sdm password.It has not accepted the credentials u have given during deployment.
Check with all Sap enterprise portal settings in the prefernces/NWDS
The host name,alias,port
If not done with
Try to change the sdm password using this Password trouble in SDM
restart server again after changes
even try
- Stop nd restart the sdm from yor NWDS and deploy once again
Thanks,
Swathi
Do offer pts:-)

Email server settings

Hi, I have a Blackberry Pearl 8130 that used to be used to access our county school system's email account. My wife entered some information into the Blackberry 2 years ago, and it apprently did some sort of an auto-config for the email account. She doesn't remember entering any server settings, etc etc. My question is how can we pull up the account settings (incoming and outgoing servers, etc) to plug into an iPhone that needs to access that account? The iPhone doesn't seem to be able to perform the same auto-config that the Pearl apparently was able to do. I'm not terribly Blackberry-literate (it's been my wife's phone), so I'll almost certainly need a good step-by-step for this if it can be done! Thanks in advance for any help you guys can pass along!

Hmmmm...well, if it's not one of those that BIS auto-recognizes, then you'd have had to put them in way back then...and can see them now. So try this.
On your BB, go into Setup > Email Settings. That should display a list of the various BIS conduits that are configured. Click on the one in question and that should display the requisite settings. You might also have to press the BBKey and select "Advanced Settings" to see the server names and such.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Java Server settings location in Config

Similar Messages

Maybe you are looking for