JavaFX Script plugin for the Eclipse IDE

Experience the JavaFX Script in the comfort of your favorite IDE. For the download and documentation visit the project page: http://kenai.com/projects/eplugin

I have been unable to get the JavaFX Script plugin working with either Eclipse 3.3 or 3.4. I have reported the problem on the kenai web site and tried many of the suggestions, but I (and others) still cannot get it to work.
It would really be nice to have an alternate to NetBeans for FX development.
Cheers, Eric

Similar Messages

Plugin for the eclipse

Good night people!
would like to take off one doubts use IDE eclipse version 3.0 and sdk 1,5 and would like to know to develop some application in swing which plugin that I have that to install?
I am thankful karla Maria

The eclipse download comes with all the plug-ins you'll need. You might want to get AJDT or VE if you use those technologies.

Design Studio 1.4 SDK: Issues when launching from the Eclipse IDE

Hi,
I am receiving various errors when launching Design Studio 1.4 from the Eclipse IDE for SDK development. All of the components appear in the Component panel as expected but I can't drag and drop any of the SDK components (or standard components for that matter) onto the canvas. When I launch Design Studio 1.4 independently of Eclipse everything works fine (event though I still see come errors in the Console).
I'm hoping the community can provide some guidance to help resolve the issue. The details are documented below:
Environment:
Design Studio Version: Release 1.4 SP0 Patch 1 (64-bit)
Eclipse Version: Java EE IDE Luna Service Release 1a (4.4.1) - 64-bit
Java Run-time Environment: Version 8 Update 25 (64-bit)
Operating System: Windows 7 64-bit
Eclipse Configuration for DS SDK:
Target Location:
Target Environment:
Target Run Configuration (Main):
Target Run Configuration (VM Arguments as per DS SDK Developer Guide):
Steps to Reproduce Error
1. Launch Eclipse
2. Launch DS 1.4 from Run command in Eclipse
The following screen appears immediately after launching DS from Eclipse:
At this point the DS error log is as per the attached DS_Log_After_Eclipse_Launch.txt file.
3. Create a new blank Application from the Application -> New menu. This time additional error messages appear as shown in the screenshot below:
It's not possible to drop any standard or SDK components onto the canvas because the internal browser doesn't appear to have been instantiated due to the above errors.
At this point the DS error log is as per the attached DS_Log_After_Eclipse_LaunchAndAppCreate.txt file.
3. Return to Eclipse IDE
The Eclipse Console displays the following errors:
The Eclipse Console Log is as per the attached EclipseConsoleLog.txt file.
4. Launch DS 1.4 Independently
The following errors also appear when I launch DS 1.4 independently of Eclipse but it in this case everything seems to work fine.
Any assistance would be greatly appreciated.
Thanks,
Mustafa.

Hi there,
From My Experience you batter use older version of Eclipse - Helios:
Eclipse IDE for Java EE Developers | Packages
developers/heliossr2
Good Lack

Javafx 2 plugin for RCP

I develop an eclipse RCP application and want to use Javafx 2.
So, i have created a javafx 2 plugin with the wizard New > Project > Plug in development > Plug in from existing jar archives.
My RCP application has a dependency to that plug-in. It compiles and works well when i launch my application from eclipse.
But when i try to deploy it, i obtain a java.lang.NoClassDefFoundError: javafx/scene/chart/Axis caused by java.lang.ClassNotFoundException: javafx.scene.chart.Axis
What's wrong?
My javafx 2 manifest.MF:
Manifest-Version: 1.0
Bundle-ManifestVersion: 2
Bundle-Name: Javafx2
Bundle-SymbolicName: com.thales.plugin.javafx2
Bundle-Version: 2.0.0
Bundle-ClassPath: jfxrt.jar
Export-Package: com.sun.browser.plugin,
com.sun.deploy.uitoolkit.impl.fx,
com.sun.deploy.uitoolkit.impl.fx.ui,
com.sun.deploy.uitoolkit.impl.fx.ui.resources,
com.sun.glass.events,
com.sun.glass.ui,
com.sun.glass.ui.delegate,
com.sun.glass.ui.mac,
com.sun.glass.ui.win,
com.sun.glass.ui.x11,
com.sun.glass.utils,
com.sun.javafx,
com.sun.javafx.animation,
com.sun.javafx.animation.transition,
com.sun.javafx.applet,
com.sun.javafx.application,
com.sun.javafx.beans.annotations,
com.sun.javafx.beans.event,
com.sun.javafx.binding,
com.sun.javafx.charts,
com.sun.javafx.collections,
com.sun.javafx.collections.annotations,
com.sun.javafx.collections.transformation,
com.sun.javafx.css,
com.sun.javafx.css.converters,
com.sun.javafx.css.parser,
com.sun.javafx.cursor,
com.sun.javafx.effect,
com.sun.javafx.embed,
com.sun.javafx.event,
com.sun.javafx.font,
com.sun.javafx.functions,
com.sun.javafx.fxml,
com.sun.javafx.fxml.builder,
com.sun.javafx.fxml.expression,
com.sun.javafx.geom,
com.sun.javafx.geom.transform,
com.sun.javafx.iio,
com.sun.javafx.iio.bmp,
com.sun.javafx.iio.common,
com.sun.javafx.iio.gif,
com.sun.javafx.iio.jpeg,
com.sun.javafx.iio.png,
com.sun.javafx.jmx,
com.sun.javafx.logging,
com.sun.javafx.perf,
com.sun.javafx.property,
com.sun.javafx.robot,
com.sun.javafx.robot.impl,
com.sun.javafx.runnable,
com.sun.javafx.runtime,
com.sun.javafx.runtime.async,
com.sun.javafx.runtime.eula,
com.sun.javafx.runtime.provider,
com.sun.javafx.scene,
com.sun.javafx.scene.control,
com.sun.javafx.scene.control.behavior,
com.sun.javafx.scene.control.skin,
com.sun.javafx.scene.control.skin.resources,
com.sun.javafx.scene.input,
com.sun.javafx.scene.layout.region,
com.sun.javafx.scene.paint,
com.sun.javafx.scene.shape,
com.sun.javafx.scene.text,
com.sun.javafx.scene.traversal,
com.sun.javafx.scene.web.behavior,
com.sun.javafx.scene.web.skin,
com.sun.javafx.sg,
com.sun.javafx.sg.prism,
com.sun.javafx.stage,
com.sun.javafx.svgpath.ext.geom,
com.sun.javafx.svgpath.i18n,
com.sun.javafx.svgpath.parser,
com.sun.javafx.svgpath.util,
com.sun.javafx.svgpath.util.io,
com.sun.javafx.tk,
com.sun.javafx.tk.desktop,
com.sun.javafx.tk.quantum,
com.sun.javafx.util,
com.sun.media.jfxmedia,
com.sun.media.jfxmedia.control,
com.sun.media.jfxmedia.effects,
com.sun.media.jfxmedia.events,
com.sun.media.jfxmedia.locator,
com.sun.media.jfxmedia.logging,
com.sun.media.jfxmedia.metadata,
com.sun.media.jfxmedia.track,
com.sun.media.jfxmediaimpl,
com.sun.openpisces,
com.sun.prism,
com.sun.prism.camera,
com.sun.prism.d3d,
com.sun.prism.impl,
com.sun.prism.impl.packrect,
com.sun.prism.impl.paint,
com.sun.prism.impl.ps,
com.sun.prism.impl.shape,
com.sun.prism.j2d,
com.sun.prism.j2d.paint,
com.sun.prism.nativewindow,
com.sun.prism.nativewindow.impl,
com.sun.prism.opengl,
com.sun.prism.opengl.fixedfunc,
com.sun.prism.opengl.glu,
com.sun.prism.opengl.impl.glu,
com.sun.prism.opengl.impl.glu.error,
com.sun.prism.opengl.impl.glu.tessellator,
com.sun.prism.paint,
com.sun.prism.ps,
com.sun.prism.render,
com.sun.prism.shader,
com.sun.prism.shape,
com.sun.prism.tkal,
com.sun.scenario,
com.sun.scenario.animation,
com.sun.scenario.animation.shared,
com.sun.scenario.effect,
com.sun.scenario.effect.impl,
com.sun.scenario.effect.impl.hw,
com.sun.scenario.effect.impl.hw.d3d,
com.sun.scenario.effect.impl.prism,
com.sun.scenario.effect.impl.prism.ps,
com.sun.scenario.effect.impl.prism.sw,
com.sun.scenario.effect.impl.state,
com.sun.scenario.effect.impl.sw,
com.sun.scenario.effect.impl.sw.java,
com.sun.scenario.effect.impl.sw.sse,
com.sun.scenario.effect.light,
com.sun.t2k,
com.sun.webpane.perf,
com.sun.webpane.platform,
com.sun.webpane.platform.event,
com.sun.webpane.platform.graphics,
com.sun.webpane.sg,
com.sun.webpane.sg.prism,
com.sun.webpane.sg.prism.theme,
com.sun.webpane.sg.theme,
com.sun.webpane.webkit,
com.sun.webpane.webkit.dom,
com.sun.webpane.webkit.network,
com.sun.webpane.webkit.network.about,
com.sun.webpane.webkit.network.data,
com.sun.webpane.webkit.unicode,
glass.mat,
javafx.animation,
javafx.application,
javafx.beans,
javafx.beans.binding,
javafx.beans.property,
javafx.beans.value,
javafx.collections,
javafx.concurrent,
javafx.embed.swing,
javafx.embed.swt,
javafx.event,
javafx.fxml,
javafx.geometry,
javafx.scene,
javafx.scene.chart,
javafx.scene.control,
javafx.scene.control.cell,
javafx.scene.effect,
javafx.scene.image,
javafx.scene.input,
javafx.scene.layout,
javafx.scene.media,
javafx.scene.paint,
javafx.scene.shape,
javafx.scene.text,
javafx.scene.transform,
javafx.scene.web,
javafx.stage,
javafx.util,
netscape.javascript
Bundle-RequiredExecutionEnvironment: JavaSE-1.7
Eclipse-BuddyPolicy: registered
My javafx 2 build.properties :
bin.includes = META-INF/,\
jfxrt.jar,\
WebPaneJava.dll,\
decora-d3d.dll,\
decora-sse.dll,\
fxplugins.dll,\
glib-lite.dll,\
gstreamer-lite.dll,\
javafx-font.dll,\
javafx-iio.dll,\
jfxmedia.dll,\
libxml2.dll,\
mat.dll,\
msvcr100.dll,\
prism-d3d.dll
What is missing? How can i deploy javafx in my application so the user does not have to install javafx?
Thanks

Yes, it does!
Finally, i solved my problems by doanloading a eclipse Indigo with the plugin efxclipse.
In the preferences > javafx i set the javafx SDK directory. Then, in my eclipse rcp, i put all javafx packages i needed in the "imported packages".
Finally, i added a dependency of my product to the plugins at.bestsolution.efxclipse.runtime.javafx and at.bestsolution.efxclipse.runtime.osgi found here
I don't know how to do that without efxclipse. I posted a message on their forum to know if there is another way easier than this one.
It seems their is some problems with classloading to fix and the plugin at.bestsolution.efxclipse.runtime.osgi care about that.
If someone has found another solution, i'm interested.
Edited by: Razielwar on 2 mai 2012 05:39

A little info about the iSync plugin for the N97

Several 3rd party developers have confirmed that something is broken in the way the N97 communicates via the iSync plugin. Nokia has changed, incorrectly implemented, or out right made something wrong and a firmware upgrade is DRASTICALLY needed or a plugin will NEVER work. The problem started with Nokia and ends with Nokia. They need to fix the problem with the N97. The developers feel that unless Nokia fixes this problem there will never be a plugin for the N97. It is as simple as that.
This is all the info that I have at the moment. For the time being the only way to sync your data is:
1. Prepare all of your data the way you want on your phone and then us Ovi. This can be a problem too as Ovi is not that great and is not very stable.
2. You can use Memotoo (www.memotoo.com) to sync your data via SyncML. I have used tried it and it works okay. Better than Ovi for sure but it costs.
3. You can use The Missing Sync by Mark Space (www.markspace.com - currently testing). It does not use the same way to sync via iSync plugins. The Missing Sync sends a plugin to your phone instead. The syncing is very stable and works flawlessly. The only drawback is that the phone plugin is not exactly designed for the N97 and it requires that the N97 needs to be reboot sometimes to sync. Other than this, the operation is flawless and it appears that Mark Space will be able to fix this one problem faster than Nokia will be able to fix their phone.
Hope this helps......
Show the KUDOS button some love.... Hit that bad boy.... It don't hurt....
Apple iPhone 5,
Retina MacBook Pro, iPad Mini, Nikon D4

Yes, once you have MfE, you can sync N97 to Google Calendar and Gmail Contact list. The Mac's iCal app can add the Google Calendar. For Address Book, there are two choices: Access Gmail Contact via LDAP, or do proper synchronization in iSync style (see http://lifehacker.com/393855/enable-google-contact-sync-without-an-iphoneipod-touch).
MfE is not "installed" by default in the N97, but it is actually there. I need to credit someone on this forum for mentioning it, but I'm afraid I forgot who. The steps are basically thus:
Basically go to the Menu -> App folder, look for Settings Wizard "Sett. wiz.". Try to setup an email account from there. Don't use your gmail account though (it seems like MfE tries to be smart when it recognizes some email domains and pre-selects some settings for you, but we need to be able to access some options to set on our own). Don't worry about this account, you can always delete it once MfE is configured. At some point of the setup, you will be asked what kind of server. Choose Mail for Exchange. This will trigger Mail for Exchange to be installed.
Subsequently you will see your MfE folder populated with Mail for Exchange and other stuffs. Get into it and configure your Gmail. Some settings to note:
Exchange server: m.google.com
Secure connection: Yes
Use default port: Yes
Username: Your gmail username (just the name, no need the @gmail.com part)
Password: For the gmail account
Domain: gmail.com (I believe blank is also ok, but mine is current set as such)
Make sure that synchronization is set for Contacts and Calendar only. Tasks must be disabled (it used to be because Google Calendar did not support Tasks, but even they do support Tasks now, it still breaks MfE). Email must be disabled.
Done.
I did have further trouble though. The sync keeps hanging and then eventually "Invalid Password" error (yah right, after sync halfway they realize my password is wrong... no, something else is mucked up). I eventually deleted my phone data, and re-sync it from Google again, and everything was fine.
Once you've got your phone data on Google, you can search Google for other tips on pulling the data into Mac.
Hope you have fun getting this to work.

I'm looking for the best IDE to program in C#

I am an entry level programmer and I am looking for the best IDE to practice programming in C#. What are the best and easier IDEs to work with that work on a MacBook?
Also, any suggestions on sites, books, etc that could help me learn the language better?

"If you plan on writing apps for Windows, get a Windows-based computer."
A MacBook Pro running ML is the best lapstop computer for running Windows according to
this: http://www.eweek.com/apple/apple-makes-the-best-windows-laptop-soluto/
The OP already has the best hardware for developing Windows applications.

Import for the eclipse

Post Author: gzofera
CA Forum: JAVA
hello, how do I import the web intelligence for the eclipse? there is a file that makes this war?

Post Author: Ted Ueda
CA Forum: JAVA
There is a Crystal Reports for Eclipse product, but there is no Web Intelligence for Eclipse product.There are Java-based SDKs that would allow you to interact with Web Intelligence documents on BusinessObjects Enterprise. The documentation is found here: https://boc.sdn.sap.com/node/11269the ReportEngine Java (REBean) SDK.Sincerely,Ted Ueda

Windows script needed for the following tags

hi ,
I am currently automating a web task using windows script.
For the below source script , i need wsh script
<td title="Export Report" class="ui-pg-button ui-corner-all" style="cursor: pointer;" jQuery1404898744838="556">
     <div class="ui-pg-div">
             <span class="ui-icon ui-icon-newwin"/>
                        Text - Export
From the above script,
I need to click the "export"
Please anyone guide me to form a WSH script for clicking the "Export"
So far my code is
Set IE = CreateObject("InternetExplorer.Application")
Set WshShell = Wscript.CreateObject("Wscript.Shell")
IE.navigate "url"
IE.Visible = True
Wscript.sleep 10000
IE.Document.getElementbyID("ctl00_ContentPlaceHolder1_ddl_datefilter4").focus()
WScript.sleep 10000
IE.Document.getElementbyID("ctl00_ContentPlaceHolder1_ddl_datefilter").SelectedIndex=4
WScript.Sleep 10000
IE.Document.getElementbyID("ctl00_ContentPlaceHolder1_txt_fromdate").value = "30 Jun 2014"
WScript.Sleep 10000
IE.Document.getElementbyID("ctl00_ContentPlaceHolder1_txt_todate").value = "04 Jul 2014"
WScript.Sleep 10000
IE.Document.getElementbyID("a_genslasummary").click()
WScript.sleep 10000
Thanks in Advance
Naveen

There is nothing to click on export. It is just text. YOu also cannot click on anything that does not have an event associated. Many events ae hidden in JS code.
None of the objects in your HTML have IDs so they will not be easy to find.
¯\_(ツ)_/¯

Can the photomerge plugin for the interactive layout for CS4

I was using the photomerge plugin for the interactive layout light box in CS5. Now that I have migrated onto CC 2014, will that plugin still work for CC 2014?

CS4 is an End of life product.
Please refer to:
John Nack on Adobe : Feedback, please: Photomerge in Photoshop
CS5 Photomerge vs CS4
Moving to Photoshop.
Regards
Rajshree

How to install plugin in the eclipse?

Hi all,
I made a download the KXML plugin (http://prdownloads.sourceforge.net/kxml/kxml2-min-2.2.2.jar?download), but I can't to install and use this plugin for to read XML files. For example: I need to import org.kxml2.io.KXmlParser. I put the downloaded file in the folder plugins of eclipse and I use the eclipse for develop with J2ME.
I read one article that it teaches to read XML files using the KXML API, see below:
XML File example:
<?xml version="1.0" encoding="UTF-8"?>
<list>
<person>
<name>Person 1</name>
<phone>Number 1</phone>
</person>
<person>
<name>Person 2</name>
<phone>Number 2</phone>
</person>
</list>
Source code of MIDlet
import �
import org.kxml2.io.KXmlParser;
import org.xmlpull.v1.XmlPullParser;
import org.xmlpull.v1.XmlPullParserException;
public class XMLParserMidlet extends MIDlet {
Form form = new Form("Persons");
protected void startApp() throws MIDletStateChangeException {
InputStream in = getClass().getResourceAsStream("person.xml");
try {
Display.getDisplay(this).setCurrent(form);
parser(in);
} catch (Exception e) {
e.printStackTrace();
private void parser(InputStream in) throws Exception {
//begin the XMLParser
KXmlParser parser = new KXmlParser();
parser.setInput(new InputStreamReader(in));
parser.nextTag();
//it locates in the tag <list>
parser.require(XmlPullParser.START_TAG, null, "list");
//while is different END_TAG
while (parser.nextTag () != XmlPullParser.END_TAG) {
//put in the tag <person>
parser.require(XmlPullParser.START_TAG, null, "person");
parserPerson(parser);
form.append("\n");
parser.require(XmlPullParser.END_TAG, null, "person");
parser.require(XmlPullParser.END_TAG, null, "list");
parser.next();
parser.require(XmlPullParser.END_DOCUMENT, null, null);
private void parserPeerson(KXmlParser parser) throws Exception {
//While is different of </person>
while (parser.nextTag() != XmlPullParser.END_TAG) {
//put in one tag "START". Ex: <name> ou <phone>
parser.require(XmlPullParser.START_TAG, null, null);
String name = parser.getName();
String text = parser.nextText();
System.out.println("Tag: " + name + " -> " + text);
//add the text in the Form
form.append(text);
//put in the and of tag </name> or </phone>
parser.require(XmlPullParser.END_TAG, null, name);
//the other classes that is necessary
pauseApp�
destroyApp�
thanks!

Really? You downloaded exactly the same jar as the OP? And you read exactly the same tutorial and have a question about exactly the same code?
I don't think so.
The OP didn't get an answer because the question has absolutely nothing to do with the topic of this forum. It's going to be the same for you. So find an Eclipse forum where you can ask questions about Eclipse.
Hidden Brains, indeed.

Use of additional Plugins for Netweaver / Eclipse

Hello,
i just was trying to install the Omondo Plugin for Eclipse into Netweaver, but it wasn't activating.
what is the recommended way to integrate Eclipse Plugins into Netweaver ?
I hope there is one at all
Regards,
Norbert

Hi Norbert!
> thanks for the info. i hope this will not take too
> long
I just got a special build from Omondo yesterday evening but I did not have time yet to test if it works. The problem seems to be that two different GEF builds cannot live together on the same Eclipse platform.
Regards, Tanja

Find the SAP Script name for the Output type RD00 and Appli V3

Hi Gurus,
My requirement was to copy the Std SAP Script for the output type RD00 and application name V3 and to do some modification.
Please any one suggest me how to find the Std SAP script based on the above Output type and Appl ?
Regards
paul

Hi,
The script Name is LB_BIL_INVOICE
You can find byNACE>V3>Output Types>RD00-->Processing Routines
In thje output type Press Change button and select New entries.
Regards
Sandipan
Edited by: Sandipan Ghosh on Mar 31, 2008 12:06 PM

What do the upgrade scripts do for the following cases?

Hi,
I have got the compare reports between 9.0 vanilla(Source) and 8.4 copy of production(Target).
it has the following properties.
source---------target--------action-----upgrade
changed-----*changed-------copy-------yes
changed-----*unchanged----copy-------yes
unchanged---*changed------copy--------yes
unchanged----*unchanged--copy--------yes
which means in all the above cases the customizations will be overridden.
I have read somewhere that as a developer i need to look for the following case and re-apply the customizations
source---------target--------action-----upgrade
changed-----*changed-------copy-------yes
my question is that, when we run the 9.0 upgrade scripts on 8.4 copy of production, will it not override the customizations for the following cases?
source---------target--------action-----upgrade
unchanged---*changed------copy--------yes
unchanged----*unchanged--copy--------yes
Please help me,
Thank you.
Edited by: user609854 on Dec 8, 2008 6:20 PM

If you are talking about compare reports during Initial move of Upgrade --Yes , objects from the source will come over and based on user's or you(in this case) have to re-apply them back.At later stages of the upgrade pass you have to re-apply them eventually if you want to opt with old or delivered custom or pure custom psoft objects.

What does it take to write script/plugin for Motion?

Hi,
I have no clue about this but I was wondering what would it take to write a plugin/script for M5? I'm thinking about something like "Ease & Wizz", "Split Layers", or "Rubberize it" like for after effects ?
Thanks

Well, much of that is already done in Motion with various parameter and object behaviors. But what can and can not be done in FxPlug, well, I'd find a developer and ask them. They're all pretty nice about sharing information, just not company secrets. I'm not a programmer. I know "of" FxPlug", I know the basic structure, but I'm far from a programer. If you learned FxPlug, you'd probably also want to dive into Quartz Composer, too. Tons of stuff in FCPX, Motion, and other apps, are built with Quartz Composer. I know just enough of QC to destroy whatever it is I'm trying to build, not enough to do anything real with. They're both relatively easy if you are dedicated enough.

Has anyone used the IC Interactive scripting editor for the Webclient ?

We originally received the 'Loading %0' message when loading the editor via the IC_MANAGER business role. This was overcome by updating Java (See note 717921).
However, the editor now seesm to working, I can see two examples as standard, but when I click on them I do not see anything. I've ifnored this issue and have started to create my own question and answers in preparation for a script.
However, I have hit a few quirky things while using editor. Am I alone in this, or is this just the way it is.
I'm using the latest version of CRM 7.
If anyone's used this script editor I would dearly like to hear from you, especially in avoiding any upcoming nasties that I may hit.
A perfect example of this kind of problem is in how you create 'Answers'. If I highlight the answer section and click on the 'Create' button I have the options to create the following: Field, Objective script, Question, Action, Button and script, of which none of these are what I want. I can however create a question with an answer section, but of course when it comes to dragging a answer in to the answer box I can't do this as I can't create any answers. Am I missing something?.
With regards
Jason

Hi,
We are facing similar kind of problem in our scenario "Loading 0%". We have crm7.0, IE6 and JRE 1.5.0 version.
Kindly help us, which version of JRE do we need to use?
we reffered notes: 1105843, 717921. However this did not help us.
Kindly help us.
Thanks!

JavaFX Script plugin for the Eclipse IDE

Similar Messages

Maybe you are looking for