JavaScript Pop-up Validation message

Can we capture the JavaScript Pop-up validation message in OpenScript?

Hi,
While recording the Dialog box is captured with the option you choose. Subsequently, while play-back how do you dynamically change the option.
Eg. While capturing you might have selected 'Yes' option and while playback you want to dynamically choose different option, can someone let me know the steps.
Thanks
Raj

Similar Messages

Pop up error messages for failed custom validation

I am using jdev-10.1.3.4
My application is in ADF BC
I am writing custom validation through managed bean, I want pop-up error message for this failed validation.
My problem scenario is:
I had some list box as "status"-when this status changes to failed then the other field namely "closed date" should become madantory and also date in closed date field can't be in future.I am able to have all this validation through managed bean and also able to use af:messages through which i am able to print error message on the top of the form, but i am not able to give pop up error message for this failed validation.
I had gone thru jdev guide but there is nothing like what i am asking.
it would be of great help if someone can give me some example also.
thanks in advance.

ADF has global setting where you can configure the way messages are shown to user:
You can make this setting in adf-faces-config.xml
The <client-validation> element controls how client-side converters and validators are run.
Three values are supported:
"INLINE": validation is shown inline in a page (the default)
"ALERT": validation is shown in an Javascript alert
"DISABLED": validation is only handled on the server
IN your case, set it to 'ALERT'.

Display of javascript pop-up messages in NLS

Does anyone have experience with the following condition?
Display problems will occur on javascript pop-up messages if using English O/S Browser while the language preference for the user is set for another local language.
Pop-up messages become unreadable as a result. We are trying to come up with a solution to avoid this.

Ummm - I don't think you'll get much help for JavaScript here, as it is no relation to Java.

How to set a dynamic validation message in javascript

Hi,
I am using the "validate" event on a field, along with the "script message" field, to make a validation and send a message to the user if the test fails.
- Is it possible to define parameters in this message, for example "field &1 is invalid" where we replace &1 by the name of a field?
- Is it possible to send 2 different messages (I guess it's like using a message &1)?
- What is the best practice according to your experience?
Notes:
- I am aware of the xfa.host.messageBox, but I'd like to keep Adobe logic for validations (am I wrong? why?)
- I also saw the possibility of binding a field from the context, to the message field, but I found that it was not very clean to do this way (if even possible)
Thx !

According to the tests I did since yesterday, it is very difficult to use the "validation script message" (in the "value" tab of a "text input" field, within a dynamic table), for sending a dynamic message.
I abandon, and prefer to use use
xfa.host.messageBox( "dynamic message text" )
For information, I could change the message during "validate" event, with a rather complex algorithm.
Unfortunately, when a table row is just added (dynamically, with a button), though the message has been changed, it displays the original value. When I change the field again, the changed validation message is taken into account. I don't know why.
Edited by: Sandra Rossi on Jul 24, 2009 9:01 AM : it's only to say that since then, this was the only solution! Question closed

Cfform regex validation message

I have a problem returning my message text when validating a
cfinput field against a regular expression on CF8, as follows:
<cfinput type="text" name="AddrTitle" id="AddrTitle"
size="50" maxlength="250" value="#AddrTitle#"
validate="regular_expression" pattern="[\w_-]*"
validateat="onsubmit,onserver" message="Use only alphanumeric
characters or - (dash) or _ (underscore) only for the address bar
title" />
Instead of a javascript pop-up message (which I would
expect), I get the server response using the default CF error
response (The value entered in the field ADDRTITLE is not correctly
formatted for the pattern [\w_-]*.)
In the same form, a date field validates just fine and
displays my message text properly, both in a javascript message box
or server side, when I have disabled javascript, so the cfform.js
file is available (I have checked this though the address bar too).
Does anyone know why the regex validated field isn't
displaying my custom message?

Hi,
Automatically, you can include only whole validation in your change request. But, you can create a manual change request for this message only. This definition is stored in GB931 table.
Regards,
Eli

How to get UI page validation messages?

Hi,
I have problem regarding Front End validation messages..how to get this
in my project i have a form with some fields
i need to generate small pop up message "already exist" for entering same values for perticular
columns (when click the tab for next column then i need message)
can any body help me..

Community Feedback and Suggestions (Do Not Post Product-Related Questions Here)
Mod: locking.

Web Form Validation Message Language Setting at Runtime when work in multi lingual environment

Business Catalyst use the default culture language to display web form validation message.
When we are in multi lingual environment and not using subdoamin to handle multilingual sites, we found that the validation message did appear in the default culture setting. To make this work, we need to add the below script in our template.
<script type="text/javascript">
$(document).ready(function(){
var head= document.getElementsByTagName('head')[0];
var script= document.createElement('script');
script.src= '/BcJsLang/ValidationFunctions.aspx?lang=FR';
script.charset = 'utf-8';
script.type= 'text/javascript';
head.appendChild(script);
</script>
Assuming the template is in french. You can change the lang parameter in the script according to your language.

After user 1 submits the page, it might not even be committed, so there is no way to have the pending data from user1 seen by user2.
However, we do have a new feature in ADF 11g TP4 that I plan to blog more about called Auto-Refresh view objects. This feature allows a view object instance in a shared application module to refresh its data when it receives the Oracle 11g database change notification that a row that would affect the results of the query has been changed.
The minimum requirements in 11g TP4 to experiment with this feature which I just tested are the following:
1. Must use Database 11g
2. Database must have its COMPATIBLE parameter set to '11.0.0.0.0' at least
3. Set the "AutoRefresh" property of the VO to true (on the Tuning panel)
4. Add an instance of that VO to an application module (e.g. LOVModule)
5. Configure that LOVModule as an application-level shared AM in the project properties
6. Define an LOV based on a view accessor that references the shared AM's VO instance
7. DBA must have performed a 'GRANT CHANGE NOTIFICATION TO YOURUSER'
8. Build an ADF Form for the VO that defined the LOV above and run the web page
9. In SQLPlus, go modify a row of the table on which the shared AM VO is based and commit
When the Database delivers the change notification, the shared AM VO instance will requery itself.
However that notification does not arrive all the way out to the web page, so you won't see the change until the next time you repaint the list.
Perhaps there is some way to take it even farther with the active data feature PaKo mentions, but I'm not familiar enough with that myself to say whether it would work for you hear.

Validation message

Hi
I have a code segment like this -
<messageTextInput name="WlCensusNonTreatPrimary" promptAndAccessKey="& " shortDesc="Enter the number of applicants" data:readOnly="isViewing@jheadstart:ServiceDelivery" onBlur="check()">
<onBlurValidater>
<decimal/>
</onBlurValidater> </messageTextInput>
If I am having the label removed (that is I don't have any name specified after "& " in promptAndAccessKey attribute (or) nothing at all in the Prompt attribute, I am getting the following validation message when I enter a alphabet(say 'a') in a numeric field -
"Value 'a' in " " is not a number". But, if I put a label there (say &EmpNo) I get the appropriate message.
But my problem is I don't want a label on my screen as I am arranging it in a different order (like a cross tab).
Any help?
Patrick

Patrick,
Hmm, may be if you set the anchor or id attribute to "Empno", the javascript validations message will pick it up?
If not, you better address this question to the JDeveloper forum since it is really a UIX issue. The UIX experts are monitoring the JDeveloper forum.
Steven.

Validations message- Interactive form - column

Hi,
I need 2 type of validations to happen in a single column where user enters his input.
My column will have both whole numbers and percentages.I can identify these with a key which i have in internal table.
when it is a percentage and when user tries to enter more than 100 like 12131 I should get a validation pop-up a message saying please enter % value less than 100.
How do I handle this?
Rgds
Praveen

Hi Prabhakar,
I am trying to implement your code.
My column which is user input is A field but my key field is another field in same internal table and it is B
I am expecting that I should place code in A validate/exit script.
But i can't access key field B inside A script.
if(ADOBE_DATA.ItemForm.ITEMP.DATA.B == "% installed")
        // Validation script for Percentage
        if(!(percentVal>0 && percentVal<100))
     xfa.host.messageBox("Invalid Percentage! Please enter the correct value(0-100%).",
"Error in Percentage",0,0);
                <Field>.rawValue = null;
                xfa.host.setFocus("<Field>");
How should I overcome this issue?
Rgds
Praveen
Edited by: PRAVEEN s on Apr 1, 2009 10:21 PM

Customizing EO validation messages

Example use case (JDeveloper 11.1.1.6):
- I have one EO that maps to one VO that is displayed in two different jsff tabs (tab1, tab2).
- The EO has an attribute (say Myint of type oracle.jbo.domain.Number that corresponds to a NUMBER(10,0) db type).
- Myint appears in both tabs, however in tab1 it is referred as"int1" and in tab2 as "int2".
- The attribute has a validation rule (at EO level) based on the corresponding db type (basically requesting that it is an integer).
I read/believe that validation, if possible should be done at EO level (and it makes sense as you define once and reuse in all screens).
Here are my questions:
1) In the 'Edit Validation rule ' pop-up (EO) I can define an error message based on an key from a rb.
In my case, I have a generic message like 'An integer value is required for the 'Myint' field.'
How can I customize the messages for the specific jsff tabs, e.g., get messages like:
An integer value is required for the 'int1' field.'
An integer value is required for the 'int2' field.'
I want to avoid client validation; however I would like to be able also customize my error message. Is there a way to do this?
I know I can pass a expression to the message text, but still this does not really help me.
Now if I cannot do this, does not this limits the usability of EO validation?
2) Is there a way to have ADF create the red box around the erroneous field. In my view this is nice to have as it directly identifies the issue.
Thanks

Hi,
I am using JDev 11g R2 and it has a red box highlighted for any validation failure of attribute (your point#2) but not sure if it's there in your jdev version :)
Coming to your issue,
For EO, it is always the same field irrespective of it coming from vo1 or vo2 and you don't have control of validation messages of vow/vo2 directly on EO however you can achieve your requirement in couple of ways
Option#1. You can have a custom entity level validation (invoke your custom method with what ever message you want to throw)
Option#2: You can create a transient attribute in your EO of String type and update your VO1 and VO2 to add the new transient attribute and always keep that transient attribute with int1 or int2 (based on your VO usage)
and now in your validation error message of attribute you can use place holder to read the value from transient attribute
for e.g. you error message looks like "Please fill the value for field {field}"
and it will populate field in token list in the same editor window, there in field value give it as Attribute name of transient attribute.
Regards,
Ravi Nuka.

"A Connection to the server has failed" Pop up error message.

Hi All,
We have build Oracle ADF application in which we are halted with pop-up error message "A connection to the server has failed" whenever we entered apostrophe (') in input text field all other special character are acceptable except ('). Please advise how we can get rid of this error.
Thanks,
Abhishek

Hi,
Not really my area but generally if you have an 'unusual' username required (like one that starts with a number etc) it's generally rejected by oracle. However if you surround it with double quotes it will work OK. Can you somehow incorporate this into how the adf app is connecting (wrap the username in double quotes)?
Another approach would be to just have some form validation which rejecting any ' characters before it tried to even do a login and gave a nice friendly message saying 'dont use apostrophes'?
Regards,
Harry

Pop up warning message while creating PO

Hi,
How to give a Genral or a POP up Warning Message while creating and checking a PO in ME21n and ME22n.
Even i tried in changing the local setting in the menu bar, but it doesnt work.
Help and suggestions will be much appreciated.
Thanks & Regards.
Kumar.

Hi Jay,
I tired with the BADI ME_PROCESS_PO_CUST in the method IF_EX_ME_PROCESS_PO_CUST~CHECK, but still i am able to display only error message not Warning message.
Any suggestion regarding this.....
Thanks & Regards.
Kumar.

Ok i recently tried to restore my ipod touch but when i plug it in it says your ipod needs to be restored. but when i try to restore it downloads the software and while its downloading it pops up a message saying your ipod needs to be restored. when the d

Ok i recently tried to restore my ipod touch but when i plug it in it says your ipod needs to be restored. but when i try to restore it downloads the software and while its downloading it pops up a message saying your ipod needs to be restored. when the download is finished it doesnt restore or do anything and it stays stuck on the plug your ipod into itunes screen somebody please help me.

Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

ADAPTER.JAVA_EXCEPTION - java.lang.Exception: no valid message format obje

Hi experts,
we have a problem when we call a web service PI (release 7.01 , SP 10), from legacy system : the PI system return this message : ADAPTER.JAVA_EXCEPTION ; - java.lang.Exception: no valid message format object found
For to test this scenario we use soapUI tool.
I tried the URL (... /XISOAPAdapter/HelperServlet?action=FindChannel ...) in IE and got the following response :
<?xml version="1.0"; ?>
- <s:ChannelInfo xmlns:s="http://sap.com/xi/WebService/xi30">
<channelID>11ccbb96a7f3349c895a005c9bc09cb7</channelID>
<name>CC_Soap_Sender_TestWS</name>
<type xmlns:st="http://sap.com/xi/XI/System">st:SOAP</type>
<direction>INBOUND</direction>
<party />
<service>BS_..........IDB_DEV</service>
</s:ChannelInfo>
so I think that this service is OK .
Thanks in advance for your help,
Alberto

Hi,
1) Check the URL once again- check for the extra spaces at the end of the link.
2) please refer below blog i hope it will help you
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40611dd6-e66e-2910-f383-e80fb44f9cd4?QuickLink=index&overridelayout=true
Did you check the page no 14 of the document which has the same problem - in problem analysis it has mentioned that check the URL as well as proxy setting of internet browser.
3) Try to create the ID objects manually (Sender Channel and Sender Agreement).....when we use the wizard a * gets introduced in the unfilled (unused) fields (party etc) ....however when manually created the unused fields are left blank.
4) Check if all the ID objects are available in SXI_CACHE.
regards,
ganesh.

Is there a way that you can have two different text fields (email, phone) that one at least one of them must be completed before submitting the form? Can it be done using javascript in the validation tab? if so, how?

Is there a way that you can have two different text fields (email, phone) that one at least one of them must be completed before submitting the form? Can it be done using javascript in the validation tab? if so, how?

Here is one solution:
// mouse up action for submit button;
function GetField(cName) {
// get field object for cName field with error checking;
var oField = this.getField(cName);
if(oField == null) app.alert("Error accessing field named " + cName + "\nPleae verigy field name, spelling and capitalizeation.", 1, 0);
return oField;
} // end GetField function;
var oPhone = GetField("phone");
oPhone.required = oPhone.value == oPhone.defaultValue;
var oEmail = GetField("email");
oEmail.required = oEmail.value == oEmail.defaultValue;
if(oPhone.required && oEmail.required) {
app.alert("Missing required fields.", 1, 0);
} else {
app.alert("Submitting form", 3, 0);
// additional code for submission;

JavaScript Pop-up Validation message

Similar Messages

Maybe you are looking for