Javascript Set Value

Hallo,
i have a Script:
if ($('table.apexir_WORKSHEET_DATA tr').size() ==2 )
$s('P1_VARIANTE_', $v('P1_VARIANTE'))
when the IR Report Shows one result, the value of "P1_variante_" is become the value from "P1_variante"
Without Submit the Page the Value is not saved
How can i Save the Value - i tested "doSubmit('REQUEST')" and it works but the IR report is
still 1 and Submit every time!
I want 1 Submit.
can you help me?
(Sry for my bad english, i hope you can understand)
Mike

Just to confirm what I have understood from your original question,
<li>You want to set that Item without submitting the page everytime the IR report is refreshed ?
For example after a new search filter, or columnfilter ?
If so try adding the following JS code on page load
$('#apexir_WORKSHEET_REGION').bind('apexafterrefresh',function(){
if ($('table.apexir_WORKSHEET_DATA tr').size() ==2 )
$s('P1_VARIANTE_', $v('P1_VARIANTE'))
});Note that the item is set with the value everytime on IR refresh, but it gets the new value in session only after a submit
Also if you are using "$('table.apexir_WORKSHEET_DATA tr').size()" to identify if only one record is fetch (one heading row and one data row) , it could have issues when the report uses row breaks etc(they add extra tr's under that table element )
Edited by: vee on Jan 26, 2011 2:48 AM

Similar Messages

Javascript setting value in session state

I have a javascript that figures our the interest rate for a mortgage loan based on principal balance, term and monthly payment. The script also rounds up to the nearest 8th. Here is the line code that sets the value on the APEX form:
document.getElementById('P2_NOTE_RATE_TO_PITIA_31').value = cRate.toFixed(3);
Obviously this line code doesn't set session state for the value. Users have to submit the form again to pass this new rate to other calculations on the forms.
Is there another piece of code I need to add to force value to session state? The javascript is called via the page load and it will produce the correct rate when ever values are changed to warrant a new interest rate to be calculated.
Here is the entire javascript:
function loanrate() {
function getVal(item){
if($x(item).value != "")
return parseFloat($x(item).value);
else
return 0 ;
//Allow rates of 0 to 100%, solve to the nearest 0.001%
var a=0.00001;
var b=1;
var tol=0.00001;
var test;
var t;
var y1;
var y2;
var P = getVal('P2_NEW_BAL_CALC');
var A = getVal('P2_NEW_PI_TARGET');
var N = getVal('P2_REMAINING_TERM');
var nRate;
var cRate;
var root;
var TEMP = a;
// Allow only 100 iterations (more than enough for convergence)
for(var k = 1; k<=100; k++) {
// A*(Math.pow((1+i),N)-1)/(i*Math.pow((1+i),N)) = present worth of N payments of A (beginning
// 1 period from now)
// Finally, subtract P (the present worth, or the price).
i = a;
y1 = A *(Math.pow((1+i),N)-1)/(i*Math.pow((1+i),N))- P;
i = b;
y2 = A *(Math.pow((1+i),N)-1)/(i*Math.pow((1+i),N))- P;
test = y1*y2;
// If test>0, the function that is to be driven to zero has the same sign
// for both sides of the interval.
if (test>0) {
b = a;
a = TEMP;
a = (a+b)/2;
} else {
// If test <0, the root of the equation is between a and b.
// If the interval is small enough, return (a+b)/2 as the root.
// If not, bisect the interval: save a as TEMP, move a (new) halfway toward b.
t = (b-a)/2;
if (t<tol) {
root = (a+b)/2;
// Compute the annual compounded rate, if payments are monthly
//var annual = 100*(Math.pow((1+root),12)-1);
root = root * 100;
nRate = Math.round(1000 * root)/1000 ;
cRate = (Math.ceil((nRate * 12)/.125)*.125);
document.getElementById('P2_NOTE_RATE_TO_PITIA_31').value = cRate.toFixed(3);
//$x_Value('P4_ANNUAL_RATE',Math.round(1000*annual)/1000);
break;
} else {
TEMP = a;
a = (a+b)/2;
}

I believe the following will do what you need.
document.getElementById('P2_NOTE_RATE_TO_PITIA_31').value = cRate.toFixed(3);
var get = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=dummy',0);
get.add('P2_NOTE_RATE_TO_PITIA_31',$x('P2_NOTE_RATE_TO_PITIA_31').value)
gReturn = get.get();
...

Javascript: set value of hidden item

Hi,
I have a select list and a hidden item on my page, after select a value, I want to write this value (and a little bit more) to the hidden item.
So I have done the following...
applied to page html header:
<script language="JavaScript" type="text/javascript">
function setExpress(item_id)
html_GetElement('P230_HIDDEN').value = 'Test ' + html_GetElement(item_id).value;
</script>
and in selection list I set the HTML Form Element Attributes to onChange="setExpress(this.id); .
But nothing is written to the hidden item. When I make it a text field it works correct.
Isn't it possible to set a value of hidden item by javascript? Is there another way to do this (without computation)?
Thanks for help
chrissy

Hello chrissy,
I don't see the connection between the item being Hidden or Text. The item id stays the same, and so the JavaScript reference to it.
It is possible to assign values to hidden items using JavaScript, just as you did. In the following page - http://htmldb.oracle.com/pls/otn/f?p=22814:8
-you can see a working example of your situation select list populate a hidden item, then display by using alert.
After selecting from the list you should TAB out, so it will fire the JavaScript event. In your example, you were using onChange. I think that could be problematic in cases were the default value (first value) of the select list is the one chosen no change there. In my example, I'm using onBlur.
You can see the JavaScript on the source page.
Hope this help,
Arie.

Can we set h:outputText value= "(some javascript function value)"/

Hi
Can we set <h:outputText value= "(some javascript function value)"/>
In a scenario like when user changes the item in dropdown box. label name as to change for the next text box.
-----JSP page------
h:outputText value="*" styleClass="mandatoryField" />
<h:outputText value="Matching Criteria:" />
<h:selectOneMenu id="MatchingCriteria" styleClass="dropDownMenu" value="#{OffsetTradingRuleBean.matchingCriteria}"immediate="true" onchange="unitChange()">
<f:selectItems value="#{OffsetTradingRuleBean.matchingCriteriaMap}"/>
</h:selectOneMenu>
<h:outputText value=""></h:outputText>
<h:outputText value=""></h:outputText>
<h:outputText id="DeminimisLabel" value="" ></h:outputText>
<h:inputText id="DeMinimisUnit" styleClass="text" value="#{OffsetTradingRuleBean.deMinimisUnit}" maxlength="15" onchange="detectChange()" >
<f:validator validatorId="DefaultValidator"/>
</h:inputText>
<h:outputText value=""></h:outputText>
-----Java Script-----
function unitChange(){
     if(document.getElementById("frm:MatchingCriteria").value!="1"){
     alert('inside unitchange--'+document.getElementById("frm:MatchingCriteria").value)
          document.getElementById("frm:DeminimisLabel").value="Deminimis Dollars";
     if(document.getElementById("frm:MatchingCriteria").value!="0"){
          document.getElementById("frm:DeminimisLabel").value="Deminimis Shares";
thanks in advance
Rambhapuri

balu
actually i want to swap label name using javascript. first i will call onchange event from matching criteria dropdown box . then it will fire unitChange() function.
then i am putting value Deminimis dollor or deminimis shares accroiding to the value which is there in dropdown.
this value as to come in <h:outputText id="deminimisLabel" value=" should come value from java script" />
and it should act dynamically ,. like when ever user changes the dropdown item . the corresponding name should change in lable name.
thanks
rambhapuri

Assign a Javascript variable value to a ABAP variable

Hi,
   I wish to assign a javascript variable value to a ABAP variable. Any ideas how to do that?
    Many thanks.
Rgds,
Bernice

Here's another suggestion for you.
BSP Application: SBSPEXT_HTMLB
Check out the radionbuttongroup.bsp
So then instead of using a standard HTML radio buttons you can use the HTMLB element with the parameter for onClick set then in your DO_HANDLE_EVENT you can read the value.
VIEW
<htmlb:radioButtonGroup id="radio">
<htmlb:radioButton id="id_link"
                   text="Link"
                onClick="myClickHandler"/>
<htmlb:radioButton id="id_unlink"
                   text="Unlink"
                onClick="myClickHandler"/>
</htmlb:radioButtonGroup>
DO_HANDLE_EVENT
DATA:   lt_event        TYPE REF TO if_htmlb_data.
lt_event = cl_htmlb_manager=>get_event_ex( request ).
if lt_event IS NOT INITIAL.
    if lt_event->event_name = htmlb_events=>radiobutton.
       case lt_event->event_id.
        when 'control_id_link'.
          schalter = ' '..
        when 'control_id_unlink'.
          schalter = '1'.
       endcase.
    endif.
endif.
There is an example of how to use it and read it in the DO_HANDLE_EVENT you then just have to pass the variable around (in this example the variable name is schalter and is defined as char1 in the class)

Dynamic Action on tabular form: to auto set value for all changes rows

Hi All:
I am using APEX4.2.3 and I am not very familar with JQUERY or Javascript.
I am having a tabular form to support Update and Delete action. The tabular form has 4 columns:
Column A: ID                      (Number)     : Read-only column
column B: Name                 (Varchar2)   : Editable
Column C: Age                    (Number)     : Editable
Column D: ChangeFlag      (Varchar2)   : Read-only column                             ==> however, I want this column been automatically upldated by my APEX application
Here is the requirement: First user update Column B, or C or both for # of rows; then user click "Save Change" button. For ALL updated rows, I need to automatically update Column D with below logic:
For a given row,
               IF Column D IS NULL THEN
                     set value = 'M'                           -- M means modified
               ELSE --- column D has a value already
                    IF last character of Column D is 'M', THEN
                           don't do anything;
                    ELSE
                          set value of D = existing value + 'M'                       (here + means concatenate
                   END IF;
            END IF;
I thought this can be done by creating dynamic action on tabular form ... I have researched this on this forum and can't find a good match example ..
I know I can implement this using a DB trigger; however, I want to learn if this can be achived via Dynamic Action.
Thanks!
Kevin

Hi Expert:
Anyone can offer any direction or help on this?
Thanks!
Kevin

Dynamic Form in Tabular Form i.e SET VALUE

Hi,
I have an tabular form ,
In which two column are there i.e username and department
Just I wnt to know can dynamic action i.e SET VALUE CAN BE USED IN TABULAR FORM.
AS I CHANGE THE USERNAME THERE PERSPECTIVE DEPARTMENT SHOULD CHANGE.
can anyone help.

Hello Trent,
I too, am attempting to set the value of an item when another item is changed.
I need to capture the APP_USER changing the row for each row changed in the tabular form when submitted.
My table is in a remote database that is not allowed to have APEX loaded directly in the instance (or db link TO the APEX instance).
Can’t get the APP_USER making the change at this level, as the APEX code is not there.
The instance that hosts the APEX installation accesses the table via a view through a db link.
Can’t use a trigger on the view to set the APP_USER using APEX functionality.
Not desirable to re-invent the IUD wheel using instead-of triggers.
The example you posted on http://apex.oracle.com/pls/apex/f?p=45448:11 is exactly what I need (even though your example sets the value on Lose Focus and I Set value on Change).
I am attempting to implement the dynamic action for the item using your javascript, and am almost there....but not quite. The dynamic action is updating the target item in ALL the rows in the tabular form, not just the one that is being changed.
This, I am sure, is due to my inexperience with Dynamic Actions, jquery syntax, and the javascript API’s for APEX. I believe I know what the issue IS, I’m just not sure how to work around it.
Please note: I attempted to download your example at the above website (turning off popup blockers), but had no success (I got the thank-you for downloading message, but have no clue what was downloaded to where). I was hoping to compare your form Dynamic action with mine to see where I went wrong.
If you could please, review the following and:
1) let me know what might be different from your working example?
2) provide info on how to get your working form downloaded (such a tease to have the download link there and not get it to work ;0} ) , please?
The following shows the html from view source for a row in my tabular form. This will help you get an idea of the items. The actual number of rows in the form is about 50.
<table cellpadding="0" border="0" cellspacing="0" summary="" class="report-standard">
<tr class="highlight-row">
<td headers="CHECK$01" class="data">
<label for="f01_0002" class="hideMe508">CHECK$01</label>
<input type="checkbox" name="f01" value="2" class="row-selector" id="f01_0002" />
</td>
<td headers="JOBNO_DISPLAY" class="data">X111Y2222</td>
<td align="center" headers="DEPR" class="data">
<label for="f03_0002" class="hideMe508">DEPR</label>
<input type="checkbox" name="f03_NOSUBMIT" value="1" id="f03_0002_01"
onClick="if (this.checked) {apex.jQuery('#f03_0002').val('1');}
else {apex.jQuery('#f03_0002').val('');}" />
<input type="hidden" name="f03" value="" id="f03_0002" /></span>
</td>
<td headers="UPDUSER" class="data">
<label for="f04_0002" class="hideMe508">UPDUSER</label>
<input type="text" name="f04" size="16" maxlength="2000"
value="MOMSDAT" id="f04_0002" />
</td>
<td headers="DERIVED$01" class="data">MOMSDAT</td>
<td headers="UPDDATE" class="data">13-DEC-11
<label for="f02_0002" class="hideMe508">JOBNO</label>
<input type="hidden" name="f02" value="X111Y2222" id="f02_0002" />
<input type="hidden" id="fcs_0002" name="fcs"
value="DB31F7B9ED99E6A2F7295F6B7D236409">
<input type="hidden" id="frowid_0002" name="frowid"
value="AAATI3AAGAAAAIXAAo" />
<input type="hidden" id="fcud_0002" name="fcud" value="U" />
</td>
</tr>.....
<tr>.....</tr>
</table>
To help explain:
I have a checkbox associated with array name f03_NOSUBMIT,
This checkbox OnClick updates a hidden item associated with array name f03. The hidden item is linked to the depr column of my view/table (this functionality is straight from Oracle’s tabular checkbox wizard – works great, no problems).
When the check box is changed, I need to capture the APP_USER value in the UPDUSER field associated with the f04 array (nice that the array names matched up with your example :0} )
To do so, I created a dynamic action:
Name: Set_Upduser
Sequence: 10 (it’s the only DA)
Event: Change
Select Type: jQuery Selector
jQuery Selector: input[name=”f03_NOSUBMIT”]
--note: the event does not fire if I use f03
--since that value is not actually
--changed until submit with this
--method.
Condition: - No condition –
True Actions:
Sequence: 10
Action: Set Value
Fire When Event Result is: True
Fire On page Load: Unchecked
Stop Execution On Error: Checked
Set Type: JavaScript Expression
JavaScript Expression:
var row = $x_UpTill(this.triggeringElement, 'TR');
var otherElement = $('input[name="f04"]',row)[0];
otherElement.value = '&APP_USER.';
Selection type: jQuery Selector
jQuery Selector: input[name="f04"]
This ALMOST works...
When I run the page and click on just one check box, the UPDUSER fields are updated with the APP_USER for ALL the records, not just the row for the checkbox I clicked. And, if I submit the changes, ALL the records in the table now have the APP_USER in the UPDUSER column. Not just the column where the check box was changed (Which would be expected since all the values are changed in the form – hey, the submit part works :0} ).
Your example at http://apex.oracle.com/pls/apex/f?p=45448:11 works, setting the value for the target field only for that row. If I can get mine to work the same way, I will be good to go (as in hog-heaven, doing the Snoopy Supper-Time dance).
I am thinking my issue is with the row identification in the
--- var otherElement = $('input[name="f04"]',row)[0];
I seem to not be picking up the row value in the row var.
Am I reading line correctly where 'input[name="f04"]' is pNd, and row is pValue? Read the description of the $x_UpTill API, not sure how this is working to identify pValue (Row?).
Additionally, I am not sure what the [0] is for at the end of the otherElement var definition. I don’t see that listed with the $ JavaScript API parameters (Google wasn't much help there either).
OR, am I missing something else?
Once again, if you could:
1) let me know what might be different from your working example? (What does yours have that mine doesn’t)
2) Provide any info on how to get your working form downloaded at http://apex.oracle.com/pls/apex/f?p=45448:11. Please, please?
As always, your assistance is greatly appreciated!
Edited by: amckinne on Dec 27, 2011 5:29 PM
Edited by: amckinne on Dec 27, 2011 5:33 PM

Setting value in cookie using ABAP code

Hai All,
Is it possible to set value in a cookie using ABAP code.
Regards,
H.K.Hayath Basha.

Hai Thomas Jung,
In Enterprise portal SAP has standard functionality to set inactivity timeout. We can set whatever time we want, say for example if we set the time as 15 minutes. If the user is not interacting with the system for 15 minutes then portal will logout the user automatically without any information.
Our user wants a popup to be shown that the system will be logged out due to inactivity.
Since Portal logout the user automatically without any information. I want to put in my own framework to handle inactivity timeout.
What idea I have is, when ever user interacts with any function in portal. I will set current time in a cookie. Someother application will read this cookie at regular interval, if the time difference between the cookie and system is 15, then I will force the user to logout by showing a popup screen.
In our portal we have three different type of application, they are, Java Webdynpro, ABAP-Webdynpro and BSP.
I think that from Java Webdynpro and BSP we can call a javascript to set value in a cookie, from ABAP-Webdynpro I don't know how to set a value in cookie.
This is my business requirement. Is there anyother solution to fullfill this business requirement.
Thanks & Regards,
H.K.Hayath Basha.
Let me tell the business requirement. Our user want to give a popup message when

Pass javascript field value to ABAP field value

Hi all,
how can i Pass javascript field value to ABAP field value and utilise that value within layout.

since you are new here, may i suggest you to search the forum, before posting a question. This has been discussed many times here.
to set a js variable value to a ABAP variable value, you cannot do it on the client side, your page has to go for a server rountrip so that the value can be set into a ABAP variable.
for this we generally follow the approach of setting the js variable value to a hidden html element (input type=hidden) and submit the form, and then in oninputprcessing retrieve the value from the form field and set it to a ABAP variable.
Regards
Raja

Dynamic action with set value on date field

Hi,
I'm using APEX 4.02
I'm trying to calculate the age based on the date of birth dynamically on a form. I'm trying to do this with a (advanced)dynamic action with set value.
I'm able to get this kind of action working based on a number field etc, but NEVER on a date field.
I've read all posts on this subject but so far no solution. Even if I try to simply copy the value over to another date field or typecast it to a string ( to_char function ) it does not work. So for me the problem seems to be in the source field being a date field.
I've tried using the source value as is in a select statement :
select :P33_GEBOORTEDATUM from dual;
and also type casted based on the date format :
select TO_DATE(:P33_GEBOORTEDATUM,'DD-MON-YYYY') from dual
but still no luck.
On the same form I don't have any issues as long as the calculation is based on number fields, but as soon as I start using dates all goes wrong.
Any suggestions would be greatly appreciated. If you need any extra info just let me know.
Cheers
Bas
b.t.w My application default date format is DD-MON-YYYY, maybe this has something to do with the issue .... ?
Edited by: user3338841 on 3-apr-2011 7:33

Hi,
Create a dynamic action named "set age" with following values.
Event: Change
Selection Type: Item(s)
Item(s): P1_DATE_OF_BIRTH
Action: Set value
Fire on page load: TRUE
Set Type: PL/SQL Expression
PL/SQL Expression: ROUND( (SYSDATE - :P1_DATE_OF_BIRTH)/365.24,0)
Page items to submit: P1_DATE_OF_BIRTH
Selection Type: Item(s)
Item(s): P1_AGE
Regards,
Kartik Patel
http://patelkartik.blogspot.com/
http://apex.oracle.com/pls/apex/f?p=9904351712:1

SQL Query (updateable report) Region - Conditionally Hide and Set Values

SQL Query (updateable report) Region - Conditionally Hide and Set Values
Outline of requirement :-
Master / Detail page with Detail updated on same page using SQL Query (updateable report).
The detail region has the following source
SELECT item_id,
       contract_id,
       CASE WHEN hardware_id IS NOT NULL THEN
               'HA'
            WHEN backup_dev_id IS NOT NULL THEN
               'BD'
            WHEN hardware_os_id IS NOT NULL THEN
               'HS'
       END item_type,
       hardware_id,
       backup_dev_id,
       hardware_os_id
FROM   "#OWNER#".support_items
WHERE contract_id = :P26_CONTRACT_IDThe table support_items implements arced relationships and has the following columns
CREATE TABLE SUPPORT_ITEMS
ITEM_ID         NUMBER                        NOT NULL,
CONTRACT_ID     NUMBER                        NOT NULL,
HARDWARE_ID     NUMBER,
BACKUP_DEV_ID   NUMBER,
HARDWARE_OS_ID NUMBER
)A check type constaint on support_items ensures that only one of the fk's is present.
      (    hardware_id    IS NOT NULL
       AND backup_dev_id IS NULL
       AND hardware_os_id IS NULL
OR    (    hardware_id    IS NULL
       AND backup_dev_id IS NOT NULL
       AND hardware_os_id IS NULL
OR    (    hardware_id    IS NULL
       AND backup_dev_id IS NULL
       AND hardware_os_id IS NOT NULL
      )    Hardware_Id is a FK to Hardware_Assets
Backup_dev_id is a FK to Backup_Devices
Hardware_os_id is a FK to Hardware_op_systems
The Tabular Form Element based on item_type column of SQL query is Displayed As Select List (based on LOV) referencing a named list of values which have the following properties
Display Value     Return Value
Hardware Asset    HA
Backup Device     BD
Computer System   HSThe Tabular Form Elements for the report attributes for hardware_id, backup_dev_id and hardware_os_id are all Displayed As Select List (Based on LOV).
What I want to do is only display the Select List for the FK depending on the value of the Select List on Item Type, e.g.
Item_Type is 'HA' then display Select List for hardware_id, do not display and set to NULL the Select Lists for backup_dev_id and hardware_os_id.
Item_Type is 'BB' then display Select List for backup_dev_id, do not display and set to NULL the Select Lists for hardware_id and hardware_os_id.
Item_Type is 'HS' then display Select List for hardware_os_id, do not display and set to NULL the Select Lists backup_dev_id and hardware_id.
There are properties on elements to conditionally display it but how do we reference the values of the SQL query Updateable region? they are not given a page item name?
Also on the Tabular For Elements there is an Edit tick against a report item - however when you go to the Column Attributes there is not a property with which you can control the Edit setting.
What's the best way of implementing this requirement in APEX 3.1?
Thanks.

>
Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and update your profile with a real handle instead of "user13515136".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
I have a multi-row region that displays values and allows entries in a number of fields.Provide exact details of how this has been implemented. (An example on apex.oracle.com is always a good way to do this.)
I should like the fields to be conditional in that they do not permit entry, but still display, if certain conditions apply (e.g. older rows greyed out). Can this be done? Almost anything can be done, often in multiple ways. Which are appropriate may be dependent on a particular implementation, the skills available to implement it, and the effort you're willing to expend on it. Hence it's necessary to provide full details of what you've done so far...

How to set value from one view to other view's context node attr b4 save

HI all,
My requirement is as below:
There are two views in component BP_CONT.
BP_CONT/ContactDetails    IMPL class
BP_CONT/SalesEmployee   SALESEMPLOYEE    STRUCT.SALESEMPLOYEE
I want to set value from first view to second view's context node's attribute.
i get Sales Employee BP number in ContactDetails view, from here i want to set that value in to STRUCT.SALESEMPLOYEE
of second view in the same component.
please send me code snippet for doing the same.
Thanks in advance.
seema

Hi Seema
You can access the fields from different views by either using custom controllers or by using component controllers, in your case you can access the Sales employee BP number from the Component controller.
first access the component controller as below in BP_CONT/SalesEmployee (in do_prepare_output method) or in (specific setter method)
lv_compcontroller type ref to CL_BP_CONT_BSPWDCOMPONENT_IMPL,
lv_partner type ref to cl_crm_bol_entity,
lv_role type string,
lv_partner_no type string.
lv_employee TYPE REF TO if_bol_bo_property_access,
lv_compcontroller = me->COMP_CONTROLLER.
lv_partner ?= lv_compcontroller ->typed_context->-partner->collection_wrapper->get_current( ).
lv_role = lv_partner->get_property( iv_attr_name = 'BP_ROLE' )
IF LV_ROLE = 'SALESEMPLOYEE'
lv_partner_no ?= lv_current->get_property( iv_attr_name = 'BP_NUMBER' ).
endif.
now set the value
lv_employee ?= me->typed_context->salesemployee->collection_wrapper->get_current( )
CHECK lv_employee IS BOUND.
    lv_employee->set_property( iv_attr_name = 'SALESEMPLOYEE' iv_value = lv_partner_no )
Thanks & Regards
Raj

Help to set value of an attribute based on value selected in another field

Hi all,
I want to set the value of an attribute STRUCT.ITM_TYPE to a default value whenever i select one of the value from dropdown list in LC_STATUS.
I tried to add an event in the get_p method of the lc_status but there i cant able to access the context of the ITM_TYPE as the fields are in different views.
Please Help,
Rewards will be awarded.
Naveenn

Hi Vineet,
Thanks for the suggestion.
Please chech my code and suggest me for any corrections.
In the Get_P_LCSTATUS method of Context Node BTADMINH in View1.
METHOD GET_P_LCSTATUS.
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>field_type_picklist.
    WHEN if_bsp_wd_model_setter_getter=>fp_server_event.
      rv_value = 'ACT_STATUS_SELECTED'.
ENDCASE.
ENDMETHOD.
In event handler method in Context Node BTADMINI in View2
method EH_ONACT_STATUS_SELECTED.
* Added by wizard: Handler for event 'ACT_STATUS_SELECTED'
data: lr_ent1 type ref to cl_crm_bol_entity,
         lr_ent2 type ref to cl_crm_bol_entity.
lr_ent1 = me->typed_context->BTADMINH->collection_wrapper->get_current( ).
check lr_ent1 is bound.
* To Get Value of First Attribute
lv_attr1 = lr_ent1->get_property_as_string( 'LC_STATUS' ).
* To Set Value of 2nd Input Field now based upon this value
lr_ent2 = me->typed_context->BTADMINI->collection_wrapper->get_current( ).
*lr_ent2->lock( ).
lr_ent2->set_property_as_string( iv_attr_name = 'ITM.TYPE' iv_value = 'RREQ' ).
endif.
endmethod.
but during syntax check its showing error messge as BTADMINH is unknown.
2) How and where to bind the context node in custom controller.
Please help.

How to set value in combox by code

how to set value in combox by code

Dear
You can use the following code to set the values in combobox by a query
   strQuery = "select ItemCode,ItemName from OITM"
        oRecSet = Me.SBO_Company.GetBusinessObject(BoObjectTypes.BoRecordset)
        oRecSet.DoQuery(strQuery)
             oCombo = Me.oForm.Items.Item(encontrolName.colEmpType).Specific
        If oRecset.Fields.Count > 0 Then
            While oRecset.EoF = False
                oCombo.ValidValues.Add(oRecset.Fields.Item(0).Value, oRecset.Fields.Item(1).Value)
                oRecset.MoveNext()
            End While
        End If
Regards
Rupinder

How to set value in selectOnemenu using binding

hi all.
i have bind htmlSelectOneMenu. it contains some value. I want to set or display a value after a process.
How to change value
i have tried using setValue method of both binding property and value property of htmlSelectOneMenu.
Same issue is with InputTextArea. how to set value in it via code(RowSelectionListener of icefaces)

Balaji wrote:
hi all.
i have bind htmlSelectOneMenu. it contains some value. I want to set or display a value after a process.
How to change value
i have tried using setValue method of both binding property and value property of htmlSelectOneMenu.
Same issue is with InputTextArea. how to set value in it via code(RowSelectionListener of icefaces)The html SelectOneMenu is bound to a value of a backing bean. You have to change the value of that backing bean, not the JSF component directly. JSF takes care of updating the model, you shouldn't be touching it unless you know what you are doing.

Javascript Set Value

Similar Messages

Maybe you are looking for