Javelin and Ant trouble

Hi All,
I'm trying to run Ant with the generated Ant build file (Controls application). And when I run Ant I've got this output :
Buildfile: build.xml
check-jar:
[echo] Controls.jar is not up-to-date. Running build
build:
[delete] Deleting directory C:\DOCUME~1\lacaes\LOCALS~1\Temp\wlw-temp-6760\wlw_compile6557
[mkdir] Created dir: C:\DOCUME~1\lacaes\LOCALS~1\Temp\wlw-temp-6760\wlw_compile6557
[javelin] Errors found in csf\fr\edi\exceptions\ExceptionDataBase.jcx:
[javelin] Error at line 54 column 10:
[javelin] void insertionErreur(final ImpErrRow errRow);
[javelin] <------------->
[javelin] Description: Validation class for this value was not provided or was not found.
[javelin] Prescription: Verify that the validation class for this type is available.
[javelin] Error at line 54 column 10:
[javelin] void insertionErreur(final ImpErrRow errRow);
etc.....
Some topics talks about this problem but I never saw a response. When I run setDomainEnv.cmd before Ant everything works fine: so I sure it's a classpath problem but I don't see which one ?
Thx for help :)

Hi
Which version of 8.1 are you using? You should not see the issue on the latest 8.1sp6
We have seen such issue on 8.1sp2 when you use jdk1.4.2.
There is a patch available on 8.1sp2 for the issue via CR139151. Please open a bea support case at http://bea.support.com if you need the patch.
Vimala-

Similar Messages

My new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help

my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is lagging

my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is lagging

I have updated my 4s iphone to ios 6.1.3 and have trouble connecting it to wi fi . i tried to back up it on itunes and then restore it but now i have left with a phone that still doesnt connect to wi fi and lost all my data. anyone knows how to fix it?

i have updated my 4s iphone to ios 6.1.3 and have trouble connecting it to wi fi . i tried to back up it on itunes and then restore it but now i have left with a phone that still doesnt connect to wi fi and lost all my data. anyone knows how to fix it?

If no change after restoring the iPhone with iTunes as a new iPhone or not from the backup, there is a hardware problem.

TS3899 "cannot get mail" in iphone5 suddenly. been using iphone to check 2 email accounts for months now, one is gmail and not troubled. the other is thunderbird and i get this error message now. no settings have been changed or anything! ideas?

hey all, I have been getting the "cannot get mail" error message on my iphone5 suddenly.
ive been using iphone to check two email accounts for months now, one is gmail and not troubled. the other is mail from thunderbird and i get this error message now saying it is not responding. no settings have been changed or anything, it just suddenly stopped receiving mail on my device as of Tuesday afternoon.
Does anyone have iny ideas about why? i have yet to update to the new OS7 yet, could that be it?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Hello. May I ask: I am using Acrobat 6.0.2, and having trouble formatting a PDF created from multiple (jpeg) files. Each page is formatted to A4 size, portrait. But when I create the PDF, each sheet appears as tiny, in the middle of a huge white page.

Hello. May I ask: I am using Acrobat 6.0.2, and having trouble formatting a PDF created from multiple (jpeg) files. Each page is formatted to A4 size, portrait. But when I create the PDF, each sheet appears as tiny, in the middle of a huge white page. I cannot seem to find any controls to adjust this. Any advice appreciated.

Thanks CtDave, for the further info. Unfortunately, those suggestions are not working, which is strange.
....Until last week, I used to make multi-page PDFs straight from Photoshop: File > Automate > Make PDF. One simply choses the files, orders them, and creates a PDF. (Resolution doesn't matter; 300 DPI is no problem.) However, my new Photoshop CS5 does not have the option in Automate.
What I've done, seeing as Acrobat is letting me down, is use Bridge (new to me) to create the PDF. It worked without a problem, but seems like more work than the old PS method. I will download a newer version of Acrobat to see if that makes any difference.
.....Also, thanks Test Screen Name: I agree with you that jpeg is irrelevant, and that one can make a PDF from Photoshop (Print > Save As - pdf). But that only works for SINGLE PAGE pdf, not multiple pages as far as I can tell.
Kind regards,
Prince Nuada

Cannot make .war file using tomcat with eclipse and ant

i have made all necesary configuration for deploying application using eclipse and ant for the tomcat server.
when i start the server by clicking the tomcat icon on eclipse toolbar, the message is prompted that "missing application web.xml and using defaults". i have placed the web.xml file in the web/WEB-INF directory of the source project directory.
also when i use ant by right-clicking on the build.xml file and choose Run as ant.. the process creates a desired .war file in webapps folder of the tomcat server but that war file does not works.
where is the error i cannot figure out.
am attaching the code of build.xml for reference.
please help.
build.xml:-
<project name="BecilCTI" default="compile" basedir=".">
<property file="build.properties"/>
<property file="${user.home}/build.properties"/>
<property name="app.name" value="BecilCTI"/>
<property name="app.path" value="/${app.name}"/>
<property name="app.version" value="0.1-dev"/>
<property name="build.home" value="${basedir}/build"/>
<property name="catalina.home" value="c:/Tomcat_5.5"/> 
<property name="dist.home" value="${basedir}/dist"/>
<property name="docs.home" value="${basedir}/docs"/>
<property name="manager.url" value="http://localhost:8080/manager"/>
<property name="src.home" value="${basedir}/src"/>
<property name="web.home" value="${basedir}/web"/>
<property name="compile.debug" value="true"/>
<property name="compile.deprecation" value="false"/>
<property name="compile.optimize" value="true"/>

<path id="compile.classpath">

<pathelement location="${catalina.home}/common/classes"/>
<fileset dir="${catalina.home}/common/endorsed">
<include name="*.jar"/>
</fileset>
<fileset dir="${catalina.home}/common/lib">
<include name="*.jar"/>
</fileset>
<pathelement location="${catalina.home}/shared/classes"/>
<fileset dir="${catalina.home}/shared/lib">
<include name="*.jar"/>
</fileset>
</path>
<target name="all" depends="clean,compile"
description="Clean build and dist directories, then compile"/>
<target name="clean"
description="Delete old build and dist directories">
<echo message="Cleaning all dirs."/>
<delete dir="${build.home}"/>
<delete dir="${dist.home}"/>
</target>
<target name="compile" depends="prepare"
description="Compile Java sources">

<mkdir dir="${build.home}/WEB-INF/classes"/>
<javac srcdir="${src.home}"
destdir="${build.home}/WEB-INF/classes"
debug="${compile.debug}"
deprecation="${compile.deprecation}"
optimize="${compile.optimize}">
<classpath refid="compile.classpath"/>
</javac>

<copy todir="${build.home}/WEB-INF/classes">
<fileset dir="${src.home}" excludes="**/*.java"/>
</copy>
</target>
<target name="dist" depends="compile"
description="Create binary distribution">


<jar jarfile="${catalina.home}/webapps/${app.name}.war"
basedir="${build.home}"/>

</target>
<target name="install" depends="compile"
description="Install application to servlet container">
<deploy url="${manager.url}"
username="${manager.username}"
password="${manager.password}"
path="${app.path}"
localWar="file://${build.home}"/>
</target>
<target name="list"
description="List installed applications on servlet container">
<list url="${manager.url}"
username="${manager.username}"
password="${manager.password}"/>
</target>
<target name="prepare">

<mkdir dir="${build.home}"/>
<mkdir dir="${build.home}/WEB-INF"/>
<mkdir dir="${build.home}/WEB-INF/classes"/>

<copy todir="${build.home}">
<fileset dir="${web.home}"/>
</copy>
<mkdir dir="${build.home}/WEB-INF/lib"/>
</target>
<target name="reload" depends="compile"
description="Reload application on servlet container">
<reload url="${manager.url}"
username="${manager.username}"
password="${manager.password}"
path="${app.path}"/>
</target>
<target name="remove"
description="Remove application on servlet container">
<undeploy url="${manager.url}"
username="${manager.username}"
password="${manager.password}"
path="${app.path}"/>
</target>
</project>

So is context.xml actually overwriting the settings found in server.xml?I think so. The way I understand it is the the context.xml file saves you from having to edit server.xml. It is preferred for each web app to do its own config, rather than lumping them all together in server.xml.
And what would be the best way to create the war file? IAt its heart, a WAR is just a zip file with its contents laid out in according to the specification of a web application directory structure.
So the simplest way to make a war file is to zip up your directory structure with a tool like winzip, and rename it to be myApp.war.
Regarding ant, I would recommend you take a look through [url http://jakarta.apache.org/tomcat/tomcat-4.1-doc/appdev/index.html
]this tutorial. It explains the basics of website layout, configuration and deployment.
On [url http://jakarta.apache.org/tomcat/tomcat-4.1-doc/appdev/source.html] this page in particular, it includes a link to a basic ant file that you can use as a starting point.
Cheers,
evnafets

10g BPEL process upgrade to 11g hangs in Jdeveloper and Ant script

I have successfully upgraded several 10g (10.1.3.4) BPEL processes and ESB services using Jdeveloper 11g (11.1.1.6.0) migration wizard and deployed them to an 11g environment. Both 10g and 11g environments are up and running.
However, my 11g jdeveloper hangs when migrating the next BPEL process. It hangs at the message box with the title: "Migration Status". I tried the Ant script and it hangs too. It hangs after printing out:
"CompositeRefs
[upgrade] WARNING: UPGBPEL-02009: No Binding setup for : "soapCheckPrivileges"
. This will cause compilation of the upgraded project to fail. Check SOA Upgrade
documentation on manual steps necessary to bind this composite reference. If ne
cessary, upgrade and deploy any dependencies. If planning to retain 1013x nodes
in this projects dependency tree, check earlier part of this log for 1013x WSDL
URLs that can be used."
I guess it makes sense since Jdeveloper and Ant script use the same code base for migration.
One other observation is that if I kill the hanging jdeveloper process and reopen it and go through the migration wizard again, it will be successful without hanging. However, when I fix all the wsdl reference and do a build and deploy to sar. The resulting sar is defective and cannot be deployed to Weblogic even if both build and deploy to sar report success. The defective sar contains only scac.log and scac-log.xml, not even composite.xml.
One difference between this BPEL process and others I have successfully upgraded is that it depends on an ESB service (this esb service has been upgraded and deployed to 11g).
Any ideas?
Thanks,

I will answer my question. I killed the migrating Java process and the migrating wizard will report failure of migrating the .jpr file. Actually, the only thing missing in the migrated .jpr file is deployment profile which I can generate from deployment menu. And I can deploy the migrated process. This works as a workaround.

I baught second hand iMac and having trouble to reset to factory setting Help pls

I baught second hand iMac and having trouble to reset to factory setting Help pls

The previous owner left a Recovery HD partition on the drive. You cannot use it because it will only install a version of OS X that is tied to that persons Apple ID. You cannot use his/her Apple ID nor reinstall his/her copy of OS X. You must start, literally, from scratch.
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

FlexBuilder 3 = MXMLC and ANT?

Hi all-
Admittedly I'm a flash / flex newbie, I have kindof a basic
question... Flex Builder 3 has the .project and
.actionScriptProperties files. I'm aware that MXMLC has a
"--load-config" option. What is the best way to unify those two
things? I've been trying for a week to get this stuff working using
basic MXMLC stuff and I've got some things but I don't think it's
the same thing that running a build in FlexBuilder does.
The command I'm running is:
mxmlc +FOO=something +BAR=something
--load-config=./test-flex-config.xml MyFile.as -output MyOutput.swf
...so I think I've gotten far, but I don't understand why I
can't use "mxmlc
--load-actionScriptProperties=./.actionScriptProperties" ??? Aren't
they all made by Adobe?
--Robert

No not really (thanks anyway). The link shows basically the same as my input except for the better formatting of the output.
Both my and the example given both uses the Ant <exec> tag which start ojaudit from the command line. The problems still exist because I would like Ant to know if something was reported and the stop the Ant build process. A kind of "failOnValidationError".
PMD has this (example below shows and Ant tag called pmd which is part of the PMD system.
<pmd printToConsole="yes" failOnRuleViolation="on">
Can ojaudit also do something like this? Or is there a way Ant can "scan" the result from the audit process and take the appropriate action?

I am running Mountain Lion and have trouble installing Adobe Application Manager

I am running Mountain Lion and have trouble installing Adobe Application Manager

Hi,
Do you receive any specific error message when Adobe application manager is being installed?
Thanks

I am physically disabled and having trouble with the sensitivity of the screen on my iPad mini - any suggestions?

I am physically disabled and having trouble selecting apps because of the sensitivity of the screen - any suggestions on what to do?

I would think assistive touch would be exactly what you are looking for. It's engaged using the Accessibility method I described above.
Here's the writeup about assistive touch from the iPad User Guide:
AssistiveTouch AssistiveTouch helps you use iPad if you have difficulty touching the screen or pressing the buttons. You can use a compatible adaptive accessory (such as a joystick) together with AssistiveTouch to control iPad. You can also use AssistiveTouch without an accessory to perform gestures that are difficult for you.
Turn on AssistiveTouch: Go to Settings > General > Accessibility > AssistiveTouch. To set Triple-click Home to turn AssistiveTouch on or off, go to Settings > General > Accessibility > Triple-click Home.
Adjust the tracking speed (with accessory attached): Go to Settings > General > Accessibility > AssistiveTouch > Touch speed.
Show or hide the AssistiveTouch menu: Click the secondary button on your accessory.
Hide the menu button (with accessory attached): Go to Settings > General > Accessibility >
AssistiveTouch > Always Show Menu.
Perform a swipe or drag that uses 2, 3, 4, or 5 fingers: Tap the menu button, tap Gestures, and then tap the number of digits needed for the gesture. When the corresponding circles appear on the screen, flick or drag in the direction required by the gesture. When you finish, tap the menu button.
Perform a pinch gesture: Tap the menu button, tap Favorites, and then tap Pinch. When the pinch circles appear, touch anywhere on the screen to move the pinch circles, then drag the pinch circles in or out to perform a pinch gesture. When you finish, tap the menu button.
Create your own gesture: Tap the menu button, tap Favorites, and then tap an empty gesture placeholder. Or, go to Settings > General > Accessibility > AssistiveTouch > Create New Gesture.
Lock or rotate the screen, adjust iPad volume, or simulate shaking iPad: Tap the menu button, then tap Device.
Simulate pressing the Home button: Tap the menu button, then tap Home. Move the menu button: Drag it to any location on the screen.
Exit a menu without performing a gesture: Tap anywhere outside the menu.

[svn] 758: Updating all modules to Java 1.5.0 and Ant 1.7.0

Revision: 758
Author: [email protected]
Date: 2008-03-07 10:47:56 -0800 (Fri, 07 Mar 2008)
Log Message:
Updating all modules to Java 1.5.0 and Ant 1.7.0
* Updated setup.sh to reflect this.
* Added an Eclipse project called flex-asc; it's required to run the other compiler projects now (now you can build and debug the entire compiler, including asc, all in Eclipse; I've removed the reference to asc.jar).
* The other Eclipse projects now specify Java 1.5.
* Revving asc.jar for compatibility with Java 1.5; it's taken from the 3.0.x branch temporarily while mainline asc is fixed up.
* Fixed some assertions in mainline ASC (commenting them out with comments means fixing them, in this case)
* Fixed some in-your-face warnings in the modules when compiling.
* This will probably break the build, so hold tight. Preemptively, I'm on it...
Modified Paths:
flex/sdk/trunk/README.txt
flex/sdk/trunk/development/eclipse/java/flex-compiler/.classpath
flex/sdk/trunk/development/eclipse/java/flex-compiler/.settings/org.eclipse.jdt.core.pref s
flex/sdk/trunk/development/eclipse/java/flex-compiler/.settings/org.eclipse.jdt.ui.prefs
flex/sdk/trunk/development/eclipse/java/flex-debugger/.classpath
flex/sdk/trunk/development/eclipse/java/flex-debugger/.settings/org.eclipse.jdt.core.pref s
flex/sdk/trunk/development/eclipse/java/flex-debugger/.settings/org.eclipse.jdt.ui.prefs
flex/sdk/trunk/development/eclipse/java/flex-jars/.classpath
flex/sdk/trunk/development/eclipse/java/flex-swfutils/.classpath
flex/sdk/trunk/development/eclipse/java/flex-swfutils/.settings/org.eclipse.jdt.core.pref s
flex/sdk/trunk/development/eclipse/java/flex-swfutils/.settings/org.eclipse.jdt.ui.prefs
flex/sdk/trunk/lib/asc.jar
flex/sdk/trunk/modules/antTasks/build.xml
flex/sdk/trunk/modules/asc/README.txt
flex/sdk/trunk/modules/asc/build/java/build.xml
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/embedding/LintEvaluator.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/parser/MetaDataEvaluator.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/util/Context.java
flex/sdk/trunk/modules/compiler/build.xml
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/API.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/config/ConfigurationBuffer.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/swc/zip/ZipEntry.java
flex/sdk/trunk/modules/compiler/src/java/flex2/tools/ToolsConfiguration.java
flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/Library.java
flex/sdk/trunk/modules/debugger/build.xml
flex/sdk/trunk/modules/swfutils/build.xml
flex/sdk/trunk/modules/swfutils/src/java/flash/util/ExceptionUtil.java
flex/sdk/trunk/setup.sh
Added Paths:
flex/sdk/trunk/development/eclipse/java/flex-asc/
flex/sdk/trunk/development/eclipse/java/flex-asc/.classpath
flex/sdk/trunk/development/eclipse/java/flex-asc/.project
flex/sdk/trunk/development/eclipse/java/flex-asc/.settings/
flex/sdk/trunk/development/eclipse/java/flex-asc/.settings/org.eclipse.jdt.core.prefs
flex/sdk/trunk/development/eclipse/java/flex-asc/.settings/org.eclipse.jdt.ui.prefs
flex/sdk/trunk/development/eclipse/java/flex-jars/.settings/
flex/sdk/trunk/development/eclipse/java/flex-jars/.settings/org.eclipse.jdt.core.prefs
Property Changed:
flex/sdk/trunk/development/eclipse/java/flex-compiler/
flex/sdk/trunk/development/eclipse/java/flex-debugger/
flex/sdk/trunk/development/eclipse/java/flex-jars/
flex/sdk/trunk/development/eclipse/java/flex-swfutils/

I'm expieriencing the very same problem, i.e. code compilation with a 1.5.0_06 compiler and execution on a 1.5.0_06 jre works fine, but the code parser will display an red line under a code line like the following:
Vector<String> sv = new Vector<String>();
I did what was hinted to in the reply. I connected to archive rt.jar in the jre-director of the jdk-1.5 and connected the javadoc for 1.5, but I still have the red lines.
I have also added the argument -source 1.5 to the compiler, but nothing seems to help.
Any hints very much appreciated. Many thanks.
Pasqualino

Ant Trouble: Defining class file properly

I'm new to the Java and Ant world and was wondering if someone would be kind enough to explain why my sample xml file cannot find the class file?
The XML / class file relationship works well when both files are in the same directory. I then moved the class file into a subdirectory named "Dir1" and cannot seem to get the proper reference. I'm sure it's something simple but I'm not experienced enough to be able to figure it out.
The key seems to be in the bolded text below (or so I believe) but I haven't been able to find a path that seems to work as of yet. Each time I try the code below, I get a simple class cannot be found error.
XML File:
<?xml version="1.0"?>
<project name="Test" default="main">
<description>
Sample to test class file in subdirectory
</description>
<taskdef name="Hi1" classname="Ant.Sample.Dir1.Hi1"/>
<target name="main">
<Hi1 str1="This is Hi1.class"/>
</target>
</project>
Class File:
import org.apache.tools.ant.*;
import java.text.*;
public class Hi1 extends Task {
private String msg;
// Set msg variable
public void setstr1(String str1)
this.msg = str1;
// The method executing the task
public void execute() throws BuildException {
main(msg);
public static void main(String msg)
System.out.println("Hi1: " + msg);
Thanks!
Cameron

Hi,
I'm not sure what exactly you want to do, but I recomend to do a little bit differently:
<?xml version="1.0"?>
<project name="Test" default="dist" basedir=".">
<description>
Sample to test class file in subdirectory
</description>
<target name="clean">
<delete dir="./classes/"/>
<delete dir="./dist/"/>
</target>
<target name="init">
<mkdir dir="./classes/"/>
<mkdir dir="./dist/"/>
</target>
<target name="compile" depends="init">
<javac srcdir="./dir1" destdir="./classes" />
</target>
<target name="dist" depends="compile">
<jar jarfile="./dist/test.jar" basedir="./classes/" manifest="manifest.mf"/>
</target>
<target name="run" depends="dist">
<exec dir="./dist/" executable="java.exe">
<arg line="-jar test.jar"/>
</exec>
</target>
</project>
manifest file looks like this:
Manifest-Version: 1.0
Main-Class: Hi1

I have a macbook air and have trouble getting images to load on ebay, many blogs

i have a macbook air and have trouble getting images to load on ebay, many blogs and also pinterest. What can I do to improve performence?

this is not normal but try to see the multiples accounts in the mail check if his account is not connected yet

Jdeveloper and ant

hello,
i need execute ant script before create EAR and WAR file
i found the option in the project war properties ant xml execute but the build.xml don't run ,
any ideas for jdeveloper and Ant integration ?
the use case this i want create a properties file with svn version.
thanks!!

<?xml version="1.0" encoding="windows-1252" ?>
<project xmlns="antlib:org.apache.tools.ant" default="generar">
<path id="path.svnant">
<pathelement location="libs/svnant/svnant.jar"/>
<pathelement location="libs/svnant/svnClientAdapter.jar"/>
<pathelement location="libs/svnant/svnjavahl.jar"/>
<pathelement location="libs/svnant/svnkit.jar"/>
<pathelement location="libs/svnant/ganymed.jar"/>
<pathelement location="libs/svnant/jna.jar"/>
</path>
<typedef resource="org/tigris/subversion/svnant/svnantlib.xml" classpathref="path.svnant"/>
<target name="find_revision" >
<property name="directorio" value="${buildir}"/>

<exec executable="svn" outputproperty="svnlog.out">
<arg line="log ../"/>
</exec>
<echo>${homedir}</echo>
<echo>${svnlog.out}</echo>
<taskdef resource="net/sf/antcontrib/antcontrib.properties">
<classpath>
<pathelement location="libs/svnant/ant-contrib-1.0b3.jar"/>
</classpath>
</taskdef>
<propertyregex property="revision.number" input="${svnlog.out}" select="\1">
<regexp pattern="r([0-9]*)"/>
</propertyregex>
<echo file="src\org\sidoc\common\BuildInfo.java">
package org.common;
public class BuildInfo {
public static final String revisionNumber="${revision.number}";
</echo>
</target>
</project>
works!

Javelin and Ant trouble

Similar Messages

Maybe you are looking for