JBOSS Eclipse and Oracle
Hi, I am working on JBOSS 3.2.1 with Eclise 2.1 IDE using Lomboz plugin.
I want to know how can we use Oracle as the backend database. I know about JDBC and how to use it with JSP and servlets but don't about how to use it with EJBs , more over in JBOSS.
Please help.
Eclipse+Lomboz uses xdoclet tags. You need to make sure proper data sources are configured and used when deploying the project as well as generating ejbsrc in eclipse.
1. xdoclet.xml
Check jboss tag. set correct values for 'datasource', 'datasourcemapping' They are set to 'PLEASE_MODIFY_THIS' . If this is not updated then JBoss uses inbuilt database 'Hypersonic'.
2. jboss.xml & ejb-jar.xml
all the bean elements have 'res-ref-name' Set this approriately.
If you notice Eclipse/Lomboz sets the values to 'jdbc/DefaultDS'.
3. standardjbosscmp-jdbc.xml
This file sets default data source to 'Hypersonic sql'. This file has type mappings for various dtabases.
hope this helps.
- Prasad
Similar Messages
-
What are the versions required for JBOSS,JDK and ORACLE to setup the ATG 10.2.
Hi Folks,
Could you please share, What are the versions required for JBOSS, JDK and ORACLE to setup the ATG 10.2.
Thank you.In case you don't have access to MOS :
JBOSS : 5.1.2 EAP
JDK : 1.6.0_38
ORACLE :
Oracle Exadata5
Oracle 10gR2 (10.2.0.3)
Oracle 10gR2 RAC (10.2.0.3)
Oracle 11gR2 (11.2.0.2.0)
Oracle 11gR2 RAC (11.2.0.2.0) -
Eclipse and Oracle AS Webservices & weblogic
Hi,
Can we use Ant tasks for Oracle AS webservices something similar to servicegen in weblogic?
Also is there a way to configure all the weblogic webservices tasks in Eclipse instead of doing that one by one.
I know we can define an Ant script with a lot of taskdefs..
Does Oracle AS supply a script for this kind of configuration?
Does weblogic have a script of this kind?
--Rajesh.Eclipse+Lomboz uses xdoclet tags. You need to make sure proper data sources are configured and used when deploying the project as well as generating ejbsrc in eclipse.
1. xdoclet.xml
Check jboss tag. set correct values for 'datasource', 'datasourcemapping' They are set to 'PLEASE_MODIFY_THIS' . If this is not updated then JBoss uses inbuilt database 'Hypersonic'.
2. jboss.xml & ejb-jar.xml
all the bean elements have 'res-ref-name' Set this approriately.
If you notice Eclipse/Lomboz sets the values to 'jdbc/DefaultDS'.
3. standardjbosscmp-jdbc.xml
This file sets default data source to 'Hypersonic sql'. This file has type mappings for various dtabases.
hope this helps.
- Prasad -
Differences between Eclipse and Oracle JDeveloper
Hi,
Could any one please provide me a list of advantages/dis-advantages and differences between Eclipse 3.1 & Oracle JDeveloper 10g (any version). It's very imp and urgent!!!
Thanks!Hi,
Could any one please provide me a list of advantages/dis-advantages and differences between Eclipse 3.1 & Oracle JDeveloper 10g (any version). It's very imp and urgent!!!
Thanks! -
Oracle Service Bus (OSB), Eclipse --- and statement of direction
Can somebody please explain what this means in: http://www.oracle.com/technology/products/integration/service-bus/docs/Oracle-Service-Bus-SOD.pdf
+...The web-based console was complemented in the 3.0 release with full IDE support in Eclipse. The Eclipse capabilities will be ported to Oracle JDeveloper to provide a one-stop IDE for all SOA design needs. Until that port is complete, customers will still be able to use the Eclipse environment as IDE (in addition to the web-based console)...+
More specifically: what will happen to the Eclipse OSB plugin/workshop once the JDeveloper port is complete?
A) will it cease to exist and/or be terminated?
B) will it remain as is, without keeping the functionality in synch with new stuff in JDev?
C) will it continue to evolve side-by-side with JDev?
Thx,
-J.I think it is clear that Oracle will remain commited to Eclipse in terms of deploying java applications to WebLogic, they will provide some plugins for some time to come. You will however see oracle specific products, such as OSB, Portal, etc removed from Eclipse and ported to JDev. The reason for this is that Oracle can release new releases within their timeframe. If Oracle rely on Eclipse to deliver some functionality before they can release new products then they will be doing their customers a disservice.
This statement in the SOD clearly states that JDev is the strategic platform and the Eclipse IP will be ported to JDev in the future:
Design-Time Environment
JDeveloper is the IDE of choice for SOA development at Oracle. AquaLogic Service Bus users have traditionally been using the web-based console to design, manage and monitor ESB flows. The web console is a key differentiator for ALSB (now Oracle Service Bus) and will therefore remain a primary design
environment moving forward.
The web-based console was complemented in the 3.0 release with full IDE support in Eclipse. The Eclipse capabilities will be ported to Oracle JDeveloper to provide a
one-stop IDE for all SOA design needs. Until that port is complete, customers will still be able to use the Eclipse environment as IDE (in addition to the web-based
console).
cheers
James -
Crystal Report and Oracle SDO_GEOMETRY
Hi,
<br />
<br />
I'm using Crystal Reports for Eclipse version 2.0.4.r825 with Eclipse 3.5 and Oracle 11g as database. I configured the database connection using ojdbc14.jar. Some of the tables i want to use in the report contains columns using the SDO_GEOMETRY data type and if i try to drag this table in the data tab of the report i get the following "Unexpected ValueType" error:
<br />
<br />
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Could not Add Object.
Unexpected ValueType: ValueType=[255]---- Error code:-2147215362 Error code name:unknownError
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(ReportSDKException.java:65)
at com.businessobjects.crystalreports.designer.core.commands.ReportCommand.throwExecFailure(ReportCommand.java:253)
at com.businessobjects.crystalreports.designer.core.commands.ReportCommand.internalDoCommand(ReportCommand.java:126)
at com.businessobjects.crystalreports.designer.core.commands.ReportCommand.execute(ReportCommand.java:237)
at com.businessobjects.crystalreports.designer.uibase.gef.commands.CoreCommand.execute(CoreCommand.java:70)
at com.businessobjects.crystalreports.designer.dseintegration.DSEDropHandler.drop(DSEDropHandler.java:114)
at org.eclipse.jface.util.DelegatingDropAdapter$3.run(DelegatingDropAdapter.java:211)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
at org.eclipse.core.runtime.Platform.run(Platform.java:888)
at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:48)
at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:175)
at org.eclipse.jface.util.DelegatingDropAdapter.drop(DelegatingDropAdapter.java:209)
at org.eclipse.swt.dnd.DNDListener.handleEvent(DNDListener.java:90)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1027)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1012)
at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:770)
at org.eclipse.swt.dnd.DropTarget.Drop(DropTarget.java:456)
at org.eclipse.swt.dnd.DropTarget$3.method6(DropTarget.java:258)
at org.eclipse.swt.internal.ole.win32.COMObject.callback6(COMObject.java:119)
at org.eclipse.swt.internal.ole.win32.COM.DoDragDrop(Native Method)
at org.eclipse.swt.dnd.DragSource.drag(DragSource.java:363)
at org.eclipse.swt.dnd.DragSource.access$0(DragSource.java:289)
at org.eclipse.swt.dnd.DragSource$1.handleEvent(DragSource.java:172)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3880)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3473)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2405)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2369)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221)
at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514)
at org.eclipse.equinox.launcher.Main.run(Main.java:1311)
Caused by: com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Unexpected ValueType: ValueType=[255]---- Error code:-2147467259 Error code name:failed
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:741)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:167)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:529)
<br />
<br />
I tried the same with the Crystal Reports 2008 trial version and i'm having the same problem.
<br />
<br />
I don't wanna use the geometry column in my report but because of this error i can't use the whole table. Is there a way to avoid this error and still use the other columns of the table. Or maybe there is another way to connect to an Oracle database which can handle this special data type.
<br />
<br />
Thanks in advance,
<br />
<br />
Jens KellerHi Jens,
Views would work also as you noted.
No, if DB manufacturers change/update their Servers/clients they need to follow ANSII 92 standards. If they don't return the correct data type then CR will not "hack" our drivers to fix their issues. We did that for years and was a code nightmare, when they got around to fixing the problem it broke CR again. We decided to follow the standards, it may be our issue sometimes but in this case unique data types typically are not supported by CR. If you want support and it's not a client issue then add your request to the Enhancement Request2 post.
So yes in your case it would make it easier but for others they'll be asking why CR doesn't show all fields. Same reason.... not a CR issue.
Thanks agian
Don -
Problems with Whitespace using nested tables from eclipse dtp oracle plugin
Hi,
sending from eclipse to oracle xe fails if whitespace is used:
Example1: Nested table in nested table
adress_table_typ has another nested table in it
that works
CREATE TABLE x (
i INTEGER PRIMARY KEY,
adressen adress_table_typ
) NESTED TABLE adressen STORE AS adressen_nt (NESTED TABLE tels STORE AS tels_nt);
inserting a newline fails
CREATE TABLE x (
i INTEGER PRIMARY KEY,
adressen adress_table_typ
) NESTED TABLE adressen STORE AS adressen_nt
(NESTED TABLE tels STORE AS tels_nt);
Example2:
Two nested tables
CREATE TABLE x (
i INT PRIMARY KEY,
l_table_typ,
m_table_typ
) NESTED TABLE laptops STORE AS laptop_nt NESTED TABLE interessen STORE AS interessen_nt;
and then an insert
INSERT INTO x VALUES (123456,
l_typ(laptop_typ('123', 'netop'),
laptop_typ('234', 'thinkpad'),
laptop_typ('345', 'iBook')),
m_typ('a', 'b', 'c')
which fails. Note that the INSERT works when copy&pasted to sqlplus. It also works if there is
just one nested table.
Am I doing somethig wrong or is this a bug in the eclipse data tools plugin?
Regards
- Peter
PS; It is rather difficult to insert whitespace in that forum editor. Any possibility to have ascii?
For a "whitespace" question rather important...A bit of an update on the original post. I was playing around with the plug-in xml file (e.g. eclipse\plugins\org.eclipse.jst.server.generic.oc4j_1.5.100.v20070608\buildfiles\oracle.10.1.3.xml). I changed the following from "deploy" to "redeploy" and it seems to be working once the applicatoin is initial deployed. Of course, I have to change it back to "deploy" if it is the first time the application is being deployed. However; I would still would like to resolve this if there is something out there that fixes this problem. Or if everything points to an enviornment problem, I can continue to play with it.
<target name="deploy.j2ee.ear" depends="check.skip.ear.deploy" unless="skip.deploy">
<antcall target="package.module.ear"/>
<oracle:redeploy
deployerUri="${deployer.uri}"
userId="${oc4j.admin.user}"
password="${oc4j.admin.password}"
file="${server.publish.dir}/${module.name}.ear"
deploymentName="${module.name}"
bindAllWebApps="${oc4j.bind.website}"/>
</target> -
Global transaction problem with JDriver/Oracle and Oracle XA
We are haveing serious problems with Container Managed Transactions on Bea 6.1
and Oracle with EJB having set "Required" for all methods. We have tried in vain
to make it work with JDriver as well as OracleXAClient. Both fail at sometime
during the execution throwing "Not called in cotext of global transaction" (with
JDriver) OR "XAER_PROTO : Routine was invoked in an
inproper context start() failed on resource 'OracleXAPool'" (this one with oracle
XA).
1.) Weblogic JDriver-XA:
DatabaseMetaData metaData = dataSource.getJDBCConnection.getMetaData();
ResultSet resultSet = metaData.getTables(null, null, tableName.toUpperCase(),
new String[]{"TABLE"});
This fails immmediately saying that it was not called from global transaction.
Interesting thing is that with OracleXA, it doesnt say this exception at this
check point.
2) Oracle XA
Okie, we couldnot read through the CLOB using it so for reading CLOB, we used
direct jdbc connection and then did away with it. Now all next sql queries were
executed against oracle pool using XA data source with OracleXAClient. But at
some point we again ran into the problem "XAER_PROTO : Routine was invoked in
an
inproper context start() failed on resource 'OracleXAPool'"
3 Oracle Thin Driver
everything always works with it.AFAIR this issue was resoved by moving tx opreations out from non-tx
methods.
Regards,
Slava
"Apurb Kumar" <[email protected]> wrote in message
news:[email protected]...
Jawad,
It would be nice if you can post the full stack trace error message. Didyou try moving to
the latest service pack (sp2) for WLS6.1.
Thanks,
Jawad Mahmood wrote:
Yes we had correctly set TXDataSource and let it to point to the right
connection
pool each time and it worked well with oracle thin driver but not whenwe switched
the pool to JDriver or OracleXAClient. Note that we could aways confirmthat pool
was successfully created alongwith we could retrieve connection from itvia TXDatSource,
things gave problem after we attempted to do what i had mentioned in mylast posting.
>>
Also with JBoss 2.4.4 things work pretty well. So couldnt be our codeproblem.
"Slava Imeshev" <[email protected]> wrote:
Jawad,
Did you set up TxDataSource?
Regards,
Slava Imeshev
"Jawad Mahmood" <[email protected]> wrote in message
news:[email protected]...
We are haveing serious problems with Container Managed Transactionson
Bea 6.1
and Oracle with EJB having set "Required" for all methods. We havetried
in vain
to make it work with JDriver as well as OracleXAClient. Both fail atsometime
during the execution throwing "Not called in cotext of global
transaction"
(with
JDriver) OR "XAER_PROTO : Routine was invoked in an
inproper context start() failed on resource 'OracleXAPool'" (this onewith
oracle
XA).
1.) Weblogic JDriver-XA:
DatabaseMetaData _metaData =
_dataSource.getJDBCConnection.getMetaData();
ResultSet resultSet = metaData.getTables(null, null,tableName.toUpperCase(),
new String[]{"TABLE"});
This fails immmediately saying that it was not called from globaltransaction.
Interesting thing is that with OracleXA, it doesnt say this exceptionat
this
check point.
2) Oracle XA
Okie, we couldnot read through the CLOB using it so for reading CLOB,we
used
direct jdbc connection and then did away with it. Now all next sqlqueries
were
executed against oracle pool using XA data source with
OracleXAClient.
But
at
some point we again ran into the problem "XAER_PROTO : Routine wasinvoked
in
an
inproper context start() failed on resource 'OracleXAPool'"
3 Oracle Thin Driver
everything always works with it.
Apurb Kumar -
How to use Jboss Mbean from Oracle BPEL
I have to invoke an application which starts by invoking Jboss Mbean and then sending some message in the queue. How to do it from Oracle BPEL? Any help is appreciated.
Hi,
I'm not sure if you want to use a JBoss MBean or a JBossMQ.
JBoss MBean is used to monitoring of java applications, but if you need call a JBoss MBean, make a Webservices wich does the call and inside the BPEL create a PartnerLink for this Webservice.
I hope to help you... -
I created a wsdl based on a dbadapter in jdeveloper, imported into eclipse and created the biz and the proxy and uploaded to oracle service bus, it works fine
but have not implemented the part of having a business xsd and wsdl to transform or map to the technical names of the database
how do i contruct or make this files
if you any sample
thanks
soniaI think it is clear that Oracle will remain commited to Eclipse in terms of deploying java applications to WebLogic, they will provide some plugins for some time to come. You will however see oracle specific products, such as OSB, Portal, etc removed from Eclipse and ported to JDev. The reason for this is that Oracle can release new releases within their timeframe. If Oracle rely on Eclipse to deliver some functionality before they can release new products then they will be doing their customers a disservice.
This statement in the SOD clearly states that JDev is the strategic platform and the Eclipse IP will be ported to JDev in the future:
Design-Time Environment
JDeveloper is the IDE of choice for SOA development at Oracle. AquaLogic Service Bus users have traditionally been using the web-based console to design, manage and monitor ESB flows. The web console is a key differentiator for ALSB (now Oracle Service Bus) and will therefore remain a primary design
environment moving forward.
The web-based console was complemented in the 3.0 release with full IDE support in Eclipse. The Eclipse capabilities will be ported to Oracle JDeveloper to provide a
one-stop IDE for all SOA design needs. Until that port is complete, customers will still be able to use the Eclipse environment as IDE (in addition to the web-based
console).
cheers
James -
Hi, I've a problem with Eclipse BPEL designer plugin (eclipse 3.3). I'm trying to create a BPEL process with eclipse and deploy it in oracle bpel process manager (10.1.3.1), but the format of the xml file created from eclipse isn't valid for oracle! In oracle examples, in fact, bpel files are in this format:
code:
<process name="CreditRatingService"
targetNamespace="http://services.otn.com"
suppressJoinFailure="yes"
xmlns:tns="http://services.otn.com"
xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/">
<variable....>
but in eclipse the output file is:
code:
<?xml version="1.0" encoding="UTF-8"?>
<bpws rocess exitOnStandardFault="yes"
name="bpeltest"
xmlns:bpws="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
xmlns:ns="UGGH"
xmlns:ns0=http://www.bpeltest.it/bpeltest/>
<bpws:variable....>
The strange fact is that eclipse create an xml in correct format (the first) at the end of the create bpel file wizard... But at the first save... The format become the second!
Please, help!Create the partner link as you normally would in the New partnerLink Wizard (launched either from the Add Partner Link link in the 'Overview' view or from the Create PartnerLink option in the partnerLink pull down in the BPEL Inspector view of an invoke operation).
After you type in the URL of the WSDL you want to link to, you will see a warning beneath the parnerLinkType text box that reads 'This WSDL does not include a partnerLinkType'. Next to that will be a link titled 'Auto-generate one'. Clicking on this link will create a 'services' sub-directory in your project folder (if one doesn't exist already) and a wrapper WSDL called '<ServiceName>.wsdl'
Example: if you use the WSDL at http://localhost:8080/axis/services/AdminService?wsdl (the Apache-Axis Admin Service), the wrapper would be created as services/AdminServiceWrapper.wsdl, which consists of a parnerLinkType element and an import element which imports the real WSDL.
From here, you can use the Axis web service as you would any other web service.
HTH,
Ian -
Unsupport feature SQL exception ---JDK1.4 and oracle 10g driver
here there,
I got the unsupport feature SQLexeption, does anybody have any idea? JDK1.4 and oracle 10g driver should fully support JDBC 3.0. Am I right ?
Thank you very much
Avni
here is my snippet code,
Connection con = DriverManager.getConnection(url, user, password);
DatabaseMetaData data = con.getMetaData();
int jdbcVersion = data.getJDBCMajorVersion();
and here is the exception,
java.sql.SQLException: Unsupported feature
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:269)
at oracle.jdbc.dbaccess.DBError.throwUnsupportedFeatureSqlException(DBError.java:690)
at oracle.jdbc.OracleDatabaseMetaData.getJDBCMajorVersion(OracleDatabaseMetaData.java:4061)
at com.sbc.jdbc.ConnectionVersion.<init>(ConnectionVersion.java:36)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:80)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:44)
at java.lang.reflect.Constructor.newInstance(Constructor.java:315)
at org.eclipse.ve.internal.java.vce.launcher.remotevm.JavaBeansLauncher.main(JavaBeansLauncher.java:93)Avni,
Works for me with Oracle 10g database, "ojdbc14.jar" JDBC driver (latest version -- 10.2.0.1.0 -- downloaded from OTN) and JDK 1.4.2_07:
conn = ods.getConnection(); // Using 'OracleDataSource'
DatabaseMetaData dbmd = conn.getMetaData();
System.out.println("JDBC Major Version: " + dbmd.getJDBCMajorVersion());Above code prints out:
JDBC Major Version: 10Good Luck,
Avi. -
Select query differences between oracle 9 and oracle 8.
Hi,
I have a problem using the select query between oracle 7 and oracle 9i I don't have the same result :
ex:
With oracle7
SQL> select 'champ1','champ2' from DUAL;
'CHAMP 'CHAMP
champ1 champ2
With Oracle 9
SQL> select 'champ1','champ2' from DUAL;
'CHAMP1' 'CHAMP2'
champ1 champ2
So Can someone tell me how to solve this problem ? Is there a parameter in oracle 9 to set?
Thanx.Whenever you are posting anything over internet forums like this - you should be very careful about not just posting the details which requires to solve the problem - also should be sensible about your question.
This is not at all desired when you are posting such question. It may be because - you may not well aware of the fact.
My suggestion is -> First Go through the basics Of SQL in general.
Then go for any specific product like Oracle/ SQL Server/ Sybase etc.
And, finally learn the advanced commands of that DB.
You asked it - may be you thought the difference in output in terms of lines. But, that is not your actual output. That is the graphical display part only.
Anyway,
You can get the quite familier output by first type the following command ->
set lin 310Regards.
Satyaki De. -
Oracle Single Sign on and Oracle Internet Directory
Hello Gurus,
What is the relationship between Oracle Single Sign on and Oracle Internet Directory.
To my understanding, OID is required to install SSO.
If OID already exist, can we just install SSO and go on integrating it to existing OID.
Great Thanks,
vimal jain.
[email protected]Hi Tim,
I've been working on this and could reproduce the issue with anonymous binds. A fix will be ready in 4.2.1.
So what I really need is the password used for login to pass to the is_member call.The P101_PASSWORD item does not save state. However, you can access the value during submit processing of the login page, for example in the post authentication function of your authentication scheme. People sometimes put code in there to query the user's groups (e.g. with apex_ldap.member_of2) and save them in an application. This item value can then be used in the authorization schemes.
Regards,
Christian -
Oracle Spatial and Oracle Forms
Hi,
Does anyone have experience with Oracle Spatial and Oracle Forms?
I have generated a form, which is based on a view. The view uses the mdsys.sdo_relate operator. Somehow I am unable to get the form to perform (to get one record it takes over 20 minutes). While useing sql-navigator to process the same statement it seems no problem. The query that also uses the view, is then processed in 10 seconds.
I also noticed that when text-functions like ' lower' of ' upper' are used to query the view, the query is processed within 15 seconds. If I don't use ' lower' or ' upper' it takes a long time (> 20 minutes) to process the query. Is it possible that this causes the bad performance of the form?
On metalink I have found that forms and spatial do not cooperate because of the pl/sql version that
forms6 uses. There is no solution presented, does anyone know of a work around?
My configuration is:
Oracle 8.1.7 on WIN2K @ PIII-800Mhz 256 Mb memory.
Formsbuilder 6
If requested I can post the queries that I have made.
With regards,
Gerjan Walrecht
[email protected]
nullHello Priya,
Look into the following.
1. Book - Pro Oracle Spatial for Oracle Database 11g by r. Kothuri, A. Godfrind, E. Beinat. This book provides a nice introduction on Oracle Spatial concepts and have examples.
2. Look at the Oracle Spatial & Graph User Guide
2. Book - Applying and Extending Oracle Spatial by S. Greener and S. Ravada. This book provides hands on information for advanced oracle spatial application developers. Practical guide on hands-on examples, Data models and develop cross-vendor database solutions.
3. This oracle spatial forum, once you understand these concepts.
In the future consider Certification on Oracle Spatial 11g Certified Implementation Specialist.
Best
Navaneet
Maybe you are looking for
-
Planning File Entry has Reset Procurement Proposal field marked
Dear Sir, We are facing a problem that in the Planning File Entry , the Material has "Reset Procurement Proposal " field marked as "X" automatically . We desire that this fileld should be blank as a default . Kindly help us on this issue pl . Rgds
-
Hi all, I have one query. When I transfer the data from interface to base table through concurrent program.the message is displayed. the output file for the request 463237 is empty (0 bytes) can u please help me . I am using Oracle EBS R12
-
Shuffle problems, please help
Got a shuffle for a family member Already had iTunes on PC for my ipod Created second user account for use with new Shuffle Installed iTunes on new user account iTunes won't recognize shuffle on new account WINXP only recognizes as USB storage device
-
Please explain me this elements in a script
hi, can any one please explain how the co-ordinates are defined and explain this code in a simple way FO791,105A0B,374,413CI13FRFN999FS FO1015,626A0B,88,96CI13FRFN998FS BY7,2.9FO104,126B3B,N,348,N,YFRFN997FS FO483,169A0B,
-
Ok I really need help - my laptop hard drive died yesterday and I had to get a new one. I've just booted up Photoshop on my new hard drive and it's saying it doesn't support importing video frames to layers on this version of Windows. It's Windows 7