Global transaction problem with JDriver/Oracle and Oracle XA

We are haveing serious problems with Container Managed Transactions on Bea 6.1
and Oracle with EJB having set "Required" for all methods. We have tried in vain
to make it work with JDriver as well as OracleXAClient. Both fail at sometime
during the execution throwing "Not called in cotext of global transaction" (with
JDriver) OR "XAER_PROTO : Routine was invoked in an
inproper context start() failed on resource 'OracleXAPool'" (this one with oracle
XA).
1.) Weblogic JDriver-XA:
DatabaseMetaData metaData = dataSource.getJDBCConnection.getMetaData();
ResultSet resultSet = metaData.getTables(null, null, tableName.toUpperCase(),
new String[]{"TABLE"});
This fails immmediately saying that it was not called from global transaction.
Interesting thing is that with OracleXA, it doesnt say this exception at this
check point.
2) Oracle XA
Okie, we couldnot read through the CLOB using it so for reading CLOB, we used
direct jdbc connection and then did away with it. Now all next sql queries were
executed against oracle pool using XA data source with OracleXAClient. But at
some point we again ran into the problem "XAER_PROTO : Routine was invoked in
an
inproper context start() failed on resource 'OracleXAPool'"
3 Oracle Thin Driver
everything always works with it.

AFAIR this issue was resoved by moving tx opreations out from non-tx
methods.
Regards,
Slava
"Apurb Kumar" <[email protected]> wrote in message
news:[email protected]...
Jawad,
It would be nice if you can post the full stack trace error message. Didyou try moving to
the latest service pack (sp2) for WLS6.1.
Thanks,
Jawad Mahmood wrote:
Yes we had correctly set TXDataSource and let it to point to the right
connection
pool each time and it worked well with oracle thin driver but not whenwe switched
the pool to JDriver or OracleXAClient. Note that we could aways confirmthat pool
was successfully created alongwith we could retrieve connection from itvia TXDatSource,
things gave problem after we attempted to do what i had mentioned in mylast posting.
>>
Also with JBoss 2.4.4 things work pretty well. So couldnt be our codeproblem.
"Slava Imeshev" <[email protected]> wrote:
Jawad,
Did you set up TxDataSource?
Regards,
Slava Imeshev
"Jawad Mahmood" <[email protected]> wrote in message
news:[email protected]...
We are haveing serious problems with Container Managed Transactionson
Bea 6.1
and Oracle with EJB having set "Required" for all methods. We havetried
in vain
to make it work with JDriver as well as OracleXAClient. Both fail atsometime
during the execution throwing "Not called in cotext of global
transaction"
(with
JDriver) OR "XAER_PROTO : Routine was invoked in an
inproper context start() failed on resource 'OracleXAPool'" (this onewith
oracle
XA).
1.) Weblogic JDriver-XA:
DatabaseMetaData _metaData =
_dataSource.getJDBCConnection.getMetaData();
ResultSet resultSet = metaData.getTables(null, null,tableName.toUpperCase(),
new String[]{"TABLE"});
This fails immmediately saying that it was not called from globaltransaction.
Interesting thing is that with OracleXA, it doesnt say this exceptionat
this
check point.
2) Oracle XA
Okie, we couldnot read through the CLOB using it so for reading CLOB,we
used
direct jdbc connection and then did away with it. Now all next sqlqueries
were
executed against oracle pool using XA data source with
OracleXAClient.
But
at
some point we again ran into the problem "XAER_PROTO : Routine wasinvoked
in
an
inproper context start() failed on resource 'OracleXAPool'"
3 Oracle Thin Driver
everything always works with it.
Apurb Kumar

Similar Messages

  • Problem with Java 5 and Oracle 10g JDBC driver

    Hi All,
    Currently we upgrade our web application to Java 5 and Oracle 10.2 JDBC driver. And we encountered a bug, when the user entered the information through UI and data didn't store into database (Oracle 9i). The problem is that this bug is not happend so often maybe once a day and this did not happen before we upgraded to Java 5 and Oracle 10.2 JDBC driver. Does anyone encounter the same problem ? Is this Java 5 problem or Oracle JDBC driver problem ?
    Thanks,

    sounds like a database problem...
    Are you using a driver version that's supported for your database engine?
    What else did you change? We once ran into a major bug in our application that had for 5 years been masked by performance problems in our hardware and infrastructure.
    Once those were resolved the bug showed itself and caused tens of thousands of records to be erroneously inserted into our database every day.
    It's certainly NOT a problem with your JVM (if it's a decent one, like the Sun implementation).
    So it's either your database, your driver, your network (dropping packets???), or your application.
    The upgrade may just have exposed something that was already there.

  • Connectivity Problem with WPF Viewer and Oracle based imbedded reports

    I've been using code to modify the Database, Username and Password in imbedded reports for quite a few years.  Whether I was using C++ V6 or C# in VS2008, the process has been basically the same.  Now I am trying to use the WPF Viewer in VS2010 and am getting an "ORA-00942: table or view does not exist" error.  I perform a successful Connectivity Test and receive the error when I'm trying to view the report. 
    If I comment out all of the code that sets the source of the data and performs the connectivity test, the report shows up in the viewer and I'm presented a logon window similar to what I see when i design the RPT file in Crystal Reports. i.e the "Server Name:" shows the name of the Oracle Database I used when I designed the report; the "Database: " is empty; the "Login ID:" displays an edit box and contains the User ID I used when designing the report; and the "Password: " displays an edit box in which I type the password.  Once I click on the OK button, the report is displayed in the WPF viewer.
    Here is the code starting after I have loaded the report into a ReportDocument:
    if(report.IsLoaded)
      CrystalDecisions.Shared.TableLogOnInfo crTableLogonInfo;
      CrystalDecisions.CrystalReports.Engine.Tables crTables = report.Database.Tables;
      foreach(CrystalDecisions.CrystalReports.Engine.Table crTable in crTables)
        crTableLogonInfo = crTable.LogOnInfo;
        crTableLogonInfo.ConnectionInfo.LogonProperties.Clear( );
        crTableLogonInfo.ConnectionInfo.Attributes.Collection.Clear( );
        crTableLogonInfo.ConnectionInfo.DatabaseName = null;
        crTableLogonInfo.ConnectionInfo.ServerName = MyDatabase;
        crTableLogonInfo.ConnectionInfo.UserID = MyUsername;
        crTableLogonInfo.ConnectionInfo.Password = MyPassword;
        crTable.ApplyLogOnInfo(crTableLogonInfo);
      report.SetParameterValue("StartingCPID", "AAAAAA");
      report.SetParameterValue("EndingCPID", "ZZZZZZ");
      if(report.Database.Tables[0].TestConnectivity())
        reportViewer.ViewerCore.ReportSource = report;
        reportViewer.ToggleSidePanel = SAPBusinessObjects.WPF.Viewer.Constants.SidePanelKind.None;
      else
        MessageBox.Show("Unable to Connect to Database in report.");
    Any idea what I'm doing wrong or what is different in this version?

    See if the KB [
    [1448013  - Connecting to Oracle database. Error; Failed to load database information|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433343338333033313333%7D.do] helps.
    Also the following may not hurt to have a look at (if only for ideas):
    [1217021 - Err Msg: "Unable to connect invalid log on parameters" using Oracle in VS .NET|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313337333033323331%7D.do]
    [1471508 - Logon error when connecting to Oracle database in a VS .NET application|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433373331333533303338%7D.do]
    [1196712 - Error: "Failed to load the oci.dll" in ASP.NET application against an Oracle database|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333133393336333733313332%7D.do]
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup

  • Transaction problem with stateless EJB and DAO

    Hi,
    I'm using a stateless session bean with container managed transaction and I have a method, which updates a row via CMP entity bean and then calls stored procedure, using a DAO object, which has to use the updated data. Both calls must be done in one transaction. The problem is that the stored procedure doesn't see the changes made from the update via CMP EJB, but after the method exits the changes are in the database. I'm using WebSphere 4.0.3 and DB2 7.2. Method code example in the stateless bean:
    public doIt(ValueObject vo) throws ... {
    OrderPosRemote opr = getOrderPosRemote();
    opr.update(vo);
    getDAO().recalc(vo);
    } catch (DAOException daoex) {
    getSessionContext().setRollbackOnly();
    And in the DAO:
    public boolean recalc(...) throws DAOException {
    Connection conn = getConnFromDataSource();
    CallableStatement cstmt = conn.prepareCall("call ...(?,?)");
    cstmt.execute();
    ... // close cstmt and release connection to the pool
    Any help will be highly appreciated !

    Hi meadandale,
    this was my first guess too and I set this attribute in the session bean method, then into the update method of the CMP bean and "manually" to the connection object in the DAO like this:
    conn.setTransactionIsolation(Connection.TRANSACTION_READ_UNCOMMITTED);
    The isolation level is set correctly (IMHO), because when I comment the line above in the DAO, an exception is thrown stating that the isolation level can't be changed within a transaction.
    Unfortenully this didn't help too. Should I set some special attribute to the database or connection pool additionally ?
    I don't understand what is the problem actually - it is definitely one transaction and why this doesn't work is not very clear to me ...

  • Installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system

    We are having installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system.
    Using interface, when installation come up to “Installing Wizard” window where Gateway Name Server Configuration window should take place, everything just freeze up
    Using console, after installation we obtain following errors:
    Installing Siebel Enterprise Server. Please wait...
    unable to launch: "ksh export
    LD_LIBRARY_PATH=/siebel/gtwysrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
    -Dtemp.dir=/root -cp /siebel/gtwysrvr/bin/setup.jar run -args LANG=ENU
    MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm" error code:
    "236"(SBL-STJ-00152)
    LD_LIBRARY_PATH=/siebel/siebsrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
    -Dtemp.dir=/root -cp /siebel/siebsrvr/bin/setup.jar run -args LANG=ENU
    REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebsrvr/admin/siebel_server.scm"
    error code: "236"(SBL-STJ-00152)
    LD_LIBRARY_PATH=/siebel/siebsrvr/mgmtagent/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
    -Dtemp.dir=/root -cp /siebel/siebsrvr/mgmtagent/bin/setup.jar run -args
    LANG=ENU MODE=LIVE
    MODEL_FILE=/siebel/siebsrvr/mgmtagent/admin/mgmtagent_ses.scm" error code:
    "236"(SBL-STJ-00152)
    Running command :
    ./ssincfgw -is:javaconsole -console -args LANG=ENU MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm
    Infinite loop of following error pops out:
    An error occurred during wizard bean change notification:
    java.lang.NoClassDefFoundError
    at ConfigInitialize.execute(ConfigInitialize.java:21)
    at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
    Is there any clue how this error can be solved??
    Thanks in advance!!
    Gordon
    Message was edited by:
    user605023

    I'm facing the same error message while install Siebel 8.0 on OEL. But before I had this ksh problem, it complains about disc space first, and I actually has plenty of disk space under the directory (it needs only 0.7 G and I have 17G free). Anybody has encountered such problem before?
    /net/sdcnas05/vol/engfs01/v_sia/8.0SIA[20405|http://forums.oracle.com/forums/]/Release/Linux/Server/Siebel_Enterprise_Server
    -bash-3.00$ ./setuplinux -is:javaconsole -console
    Initializing InstallShield Wizard........
    Initializing InstallShield Wizard........
    Launching InstallShield Wizard........
    0% 25% 50% 75% 100%
    Welcome to the InstallShield Wizard for Siebel Enterprise Server
    The InstallShield Wizard will install Siebel Enterprise Server on your
    computer.
    To continue, choose Next.
    Siebel Enterprise Server
    Siebel Systems
    Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]
    Siebel Enterprise Server Install Location
    Please specify a directory or press Enter to accept the default directory.
    Directory Name: [siebel] /slot/ems1115/appmgr/20405
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    Please select the products you wish to install.
    [ ] 1 - Gateway Name Server
    [ ] 2 - Siebel Server
    [ ] 3 - Database Configuration Utilities
    [ ] 4 - EAI Connectors
    To select an item enter its number, or 0 when you are finished: [0]: 1
    [X] 1 - Gateway Name Server
    [ ] 2 - Siebel Server
    [ ] 3 - Database Configuration Utilities
    [ ] 4 - EAI Connectors
    To select an item enter its number, or 0 when you are finished: [0]: 2
    [X] 1 - Gateway Name Server
    [X] 2 - Siebel Server
    [ ] 3 - Database Configuration Utilities
    [ ] 4 - EAI Connectors
    To select an item enter its number, or 0 when you are finished: [0]:
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    Configuring uninstallers. Please wait...
    0% 25% 50% 75% 100%
    Choose the setup type that best suits your needs.
    [X] 1 - Typical
    [ ] 2 - Compact
    [ ] 3 - Custom
    To select an item enter its number, or 0 when you are finished: [0]
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    Please select the languages you wish to install.
    [X] 1 - enu - English (American)
    [ ] 2 - fin - Finnish
    [ ] 3 - kor - Korean
    [ ] 4 - cht - Chinese (Traditional)
    [ ] 5 - ita - Italian (Standard)
    [ ] 6 - esn - Spanish (Modern)
    [ ] 7 - deu - German (Standard)
    [ ] 8 - chs - Chinese (Simplified)
    [ ] 9 - tha - Thai
    [ ] 10 - dan - Danish
    [ ] 11 - heb - Hebrew
    [ ] 12 - fra - French (Standard)
    [ ] 13 - nld - Dutch (Standard)
    [ ] 14 - ptb - Portuguese (Brazilian)
    [ ] 15 - csy - Czech
    [ ] 16 - jpn - Japanese
    [ ] 17 - ptg - Portuguese (Standard)
    [ ] 18 - ara - Arabic (Sa`udi)
    [ ] 19 - sve - Swedish
    To select an item enter its number, or 0 when you are finished: [0]
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    {color:#ff0000}*Drive "/slot/ems1115/appmgr/20405" does not have enough space to install the*
    selected configuration. Please free up "766446" KB on drive
    *"/slot/ems1115/appmgr/20405" before continuing.*{color}
    -bash-3.00$ pwd
    /slot/ems1115/appmgr/20405
    -bash-3.00$ df -h .
    Filesystem Size Used Avail Use% Mounted on
    sdc1002nap-vlan1:/vol/ems_39426_1115
    71G 55G 17G 77% /slot/ems1115

  • Problem with date format from Oracle DB

    Hi,
    I am facing a problem with date fields from Oracle DB sources. The date format of the field in DB table is 'Date base type is DATE and DDIC type is DATS'.
    I mapped the date fields to Date characters in BI. Now the data that comes to PSA is in weird format. It shows like -0.PR.09-A
    I have changing the field settings in DataSource  to internal and external and also i have tried mapping these date fields to text fields with out luck. All delivers the same format.
    I have also tried using conversion routines like, CONVERSION_EXIT_IDATE_INPUT to change format. It also delivers me the same old result.
    If anybody of you have any suggestions or if anybody have you experienced such probelms, Please share your experience with me.
    Thanks in advance.
    Regards
    Varada

    Thanks for all your reply. I can only the solutions creating view in database. I want some solution to be done in BI. I appreciate if some of you have idea in it.
    The issue again in detail
    I am facing an issue with date fields from oracle data. The data that is sent from Oracle is in the format is -0.AR.04-M. I am able to convert this date in BI with conversion routine in BI into format 04-MAR-0.
    The problem is,  I am getting data of length 10 (Output format) in the format -0.AR.04-M where the month is not in numericals. Since it is in text it is taking one character spacing more.
    I have tried in different ways to convert and increased the length in BI, the result is same. I am wondering if we can change the date format in database.
    I am in puzzle with the this date format. I have checked other Oracle DB connections data for date fields in BI, they get data in the format 20.081.031 which will allow to convert this in BI. Only from the system i am trying creating a problem.
    Regards
    Varada

  • Using the Auth pear package with php 4 and oracle

    Hi all.
    I was wondering if anybody out there has had any success (or else) using the Auth Pear package with php 4 and Oracle.
    I'm trying to do just that but can't get it to work.
    I've found lots of examples on the web for mysql but none for oracle...
    Feedback on your experiences with this would be most appreciated.
    Thanks in advance.
    Rob

    Hi cj.
    Thanks for your advice. I came across those documents but discarded them as they didn't deal with the Auth pear package I was intending on using. I didn't want to look at other alternatives as the focus of my project was primarily on migrating existing data from a mysql setup to an oracle setup. And quickly.
    I hadn't found any documentation out there on using Auth with Oracle. All examples available on the web were mysql specific.
    I eventually got round to gutting the code from the package and finding the fix to my problem.
    Just for info, Auth expects by default an auth table containing two fields username and password. That's lowercase table and field names.
    If the table name or field names to be used differ from these then they must be explicitly defined when calling Auth. Doing so resolved my problem.
    My mysql db had all lowercase naming, while my oracle db has all uppercase naming throughout.
    It is important to note that the Auth package uses the table and field names quoted, thus referring to the table and fields in a case sensitive way.
    So for an uppercase table and fields setup the call has to be :
    $options = array(
        'dsn' => "$dsn_for_my_oracledb",
        'table' => 'AUTH',
        'usernamecol' => 'USERNAME',
        'passwordcol' => 'PASSWORD',
        'db_fields' => '*',
    $a = new Auth("DB", $options , "loginFunction");I hope this helps anybody trying to use this package with oracle. It worked great for me.
    Pear Auth package documentation:
    http://www.pear.php.net/manual/en/package.authentication.auth.intro.php
    Regards,
    Robert

  • Compatibility problem windows7- 64 bits and oracle 8

    I have a compatibility problem with windows 7 and 64 bits and oracle 8 client
    the data server is also version 8
    What type of client is compatible with oracle 8 and 64 bits?
    or any solution to the problem.
    I use the client to run a desktop application
    thanks

    Oracle 8 client is not certified on Windows 7. Client 10.2.0.5 is compatible with Oracle 8 and is certified on Windows 7 too.
    To install 10.2.0.5 client, please refer to the MOS document.
    How To Install Oracle 10.2.0.5 Client Software on Windows 7 (32 or 64-bit) and Windows 2008 R2 (64-bit) (Doc ID 1316079.1)

  • Any kind of integration experience with Weblogic JMS and Oracle AQ?

    Hi,
    In my company I work with java developers who believe in some kind of "holly" database independence I don't understand and as a result my life as a database developer is hell on earth.. Yesterday we again started to discuss, this time where to log, they believe database is slow and prefer logging to filesystem, after some hours finally I could convince them for some operational and reporting needs to use the database and will do this in an asyncronous way whiich they won't get slow. After all I believe the reason for a database is data, this is the place where data lives, and with the correct desing and implementation logging to database would perform better.
    I love Oracle features, and know that we paid a lot for this software, so today I started investigating this promised solution. And quickly I found AQ and JMS topics in the documentation :)
    After this introduction here is my problem; my company use BEA Weblogic as application server and the java guys want AQ to automatically (but of course with some delay) take their JMS log requests into database tables. Does any one have similar application experience, or any kind of integration experience with Weblogic JMS and Oracle AQ?
    Any comments, references, documentation, sample code, url will be most welcomed :)
    Thank you very much!
    Tonguc
    [email protected]
    References I found upto now;
    Oracle® Streams Advanced Queuing Java API Reference 10g Release 2 (10.2) http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14291/toc.htm
    (Packages; javax.jms & oracle.jms)
    Oracle® Streams Advanced Queuing User's Guide and Reference 10g Release 2 (10.2) http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14257/toc.htm
    Part IV
    Using Oracle JMS and Oracle Streams AQPart V describes how to use Oracle JMS and Oracle Streams Advanced Queuing (AQ).
    Chapter 11, "Introducing Oracle JMS"
    Chapter 12, "Oracle JMS Basic Operations"
    Chapter 13, "Oracle JMS Point-to-Point"
    Chapter 14, "Oracle JMS Publish/Subscribe"
    Chapter 15, "Oracle JMS Shared Interfaces"
    Chapter 16, "Oracle JMS Types Examples"
    A Sample Code from Otn
    http://www.oracle.com/technology/sample_code/tech/java/web_services/jmsws/NewsQueueEJB.java.html

    I wouldn't go as far to say Oracle AQ is out-dated today. However, it is indeed a proprietary technology that did not found much main-stream adoption in the earlier years after its introduction. The advent of JMS made it somewhat more useful (or should I say intriguing, because more people are trying to tie it together with other J2EE technologies), but the Oracle's JMS wrapper classes in aqapi.jar were not feature complete for a long while, so using it outside Oracle's application server was painful, if not impossible. I do agree that the info at the dev2dev's JMS newsgroup or in this forum is highly fragmented, as neither Oracle nor BEA provides an official solution to integrate AQ with WebLogic, so people like us have to learn the technology through experimentation and in a piecemeal fashion.
    3 years ago I was literally "playing around" - we had a polling mechanism set up to use triggers to write Oracle data changes into an event table, and had a Java-based daemon to scan that table and publish events as JMS messages to the WebLogic JMS server. This continues to work reliably till today, but I was looking for a solution that has few parts - I wanted to hook up my WebLogic MDB directly to AQ as a foreign JMS provider. Although I was able to get it to work (including XA), there were a few hoops I had to jump through, such as decompiling the Oracle AQjms classes to make them bind to the WebLogic JNDI tree.
    One year after that Diptanshu Parui took what I did a giant step further - he extended the Oracle AQjms classes to allow them to be bound to the WebLogic JNDI tree naturally, and he figured out how to use WebLogic JMS messging bridge to re-send single-threaded AQ JMS messages to clustered JMS queues, which allow concurrent message assumption by multiple instances of MDB's. My impression is that he is using that setup in a production environment.
    I am sure you are aware of it but I would like to make it clear - in order to use AQ as a foreign JMS provider to WebLogic-hosted MDB's, you don't need to update your database to Oracle 10g - Oracle 8i is good enough (although I recommend at least 9i Release 2). It is not the database engine, but rather the aqapi.jar JMS wrapper on top of AQ that matters. I do recommend that you use aqapi.jar from Oracle Application Server 10.0.3 or up for better XA support, among other things. Again, you don't have to replace WebLogic with Oracle AS - you only need a single jar file from it and put it in your WebLogic's classpath. However, I don't know what this means from a licensing point of view if you ever go to production - do you have to pay the full price of OracleAS or OC4J just to use the aqapi.jar?
    In the coming days I will test the latest aqapi.jar to see how much progress Oracle has made in terms of making their J2EE products more spec-compliant :-).
    Hope the above gives you a different perspective.
    Eric

  • Does report2.5 works with srw.run_report and Oracle Apps11.0.3

    Hi,
    I have reports2.5 and using srw,run_report I want to call another report. NOw I have registered this in oracle apps 11.0.3 . Now through oracle apps if I run the main report it has to call the child report (calling via srw.run_report) and the output should be put in the Unix server directory /tmp/
    Please help Ratheesh.
    Iam not sure whether report2.5 works fine with srw.run_report and oracle apps11.0.3

    Try this isntead.
    java -classpath d:\jdbc\classes12.zip;. jdbccheckup
    an error occured:
    Exception in thread "main" java.lang.NoClassDefFoundError:jdbccheckup
    Why??????

  • Oracle10gRAC installation with ASM, SGeRAC and Oracle Clusterware on Ita64

    Hello!
    Does anyone have an installation guide for the configuration: Oracle10gRAC with ASM, SGeRAC and Oracle Clusterware on Itanium?
    Thanks in advance, Mara

    859875 wrote:
    Thanks Fiedi. Thanks a lot for your response.
    Last month I did RAC installation where I need format raw devices using below commands :
    clean all
    create part ext
    create part log
    Is it not required for standalone DB installation with ASM ?
    Basically preparing disk for ASM on RAC or non RAC is the same
    >
    >
    I am able to create 4 logical raw devices (175GB) each. 2 for Data and 2 for DB flash. However I am not able to clean those raw devices with "clean all" command.
    Can you help me ?
    what error did you get?. Try delete the logical partition and recreate it

  • Problem with Data Model and Analysis View

    I create an analyze in BI Publisher and then i create a data model using this object.
    When i try to generate an XML with a number of rows the BI Publisher return an empty XML (Only with de DATA_DS tags but no data).   To bypass this problem i make and XML file by hand and this allow me to create reports and design it but when i try to view the reports i got the message that says "No Data Found".
    So i was check the analysis and all looks appears to be fine,  In the results tab it show me a complete table with the data i was looking to use.
    So i try to repeat the error and when  i try to create the XML for the Data Model i found this two error in the logs:
    [root@server ~]# [2013-07-17T16:37:22.844-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b34,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
    [2013-07-17T16:37:26.828-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b3a,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
    [2013-07-17T16:37:26.865-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b3a,0] [APP: bipublisher#11.1.1] oracle.xdo.servlet.CreateException: Path: /FOLDER/MODEL.xdm is not pointing to a report. Actual type: ReportItem, sub-type: DataModel[[
            at oracle.xdo.servlet.ReportException.fillInStackTrace(ReportException.java:124)
            at java.lang.Throwable.<init>(Throwable.java:196)
            at java.lang.Exception.<init>(Exception.java:41)
            at oracle.xdo.servlet.ReportException.<init>(ReportException.java:36)
            at oracle.xdo.servlet.CreateException.<init>(CreateException.java:18)
            at oracle.xdo.servlet.ReportRepository.getReport(ReportRepository.java:104)
            at oracle.xdo.servlet.ReportRepository.getReport(ReportRepository.java:128)
            at oracle.xdo.servlet.dataengine.DataProcessorFactory.getDataModelPath(DataProcessorFactory.java:207)
            at oracle.xdo.servlet.dataengine.DataProcessorFactory.isSemanticLayerDataModel(DataProcessorFactory.java:99)
            at oracle.xdo.servlet.dataengine.DataProcessorFactory.isSemanticLayerDataModel(DataProcessorFactory.java:78)
            at oracle.xdo.servlet.ReportModelContextImpl.getReportXMLData(ReportModelContextImpl.java:157)
            at oracle.xdo.servlet.CoreProcessor.process(CoreProcessor.java:346)
            at oracle.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:101)
            at oracle.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:1074)
            at oracle.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:639)
            at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:492)
            at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:462)
            at oracle.xdo.servlet.XDOServlet.doGet(XDOServlet.java:280)
            at oracle.xdo.servlet.XDOServlet.doPost(XDOServlet.java:313)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
            at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
            at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
            at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
            at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.xdo.servlet.metadata.track.MostRecentFilter.doFilter(MostRecentFilter.java:64)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:125)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.xdo.servlet.init.InitCheckingFilter.doFilter(InitCheckingFilter.java:63)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
            at java.security.AccessController.doPrivileged(Native Method)
            at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
            at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
            at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
            at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
            at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
            at java.security.AccessController.doPrivileged(Native Method)
            at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
            at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
            at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
            at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
            at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
            at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
            at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
            at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
            at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
            at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
            at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
            at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
            at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    And when i try to view the report that use the analysis i got this two warning in the logs:
    [2013-07-17T16:58:01.615-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 57] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2d7c,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
    [2013-07-17T16:58:02.034-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 57] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2d84,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
    As i understand there is has a reference to a null value but i cant find what column of the analysis has the problem.
    Any ideas about how to solve or debug this?
    Thanks

    I follow your instructions and it works fine. I can create the XML and the reports can show data.
    So, i already know that there is no problem with the data and with the BI Publisher installation but i still doesn know what is the problem with the analysis view that fails.
    Any idea how to debug it?
    Thanks.

  • Differences between TOAD for Oracle and Oracle SQL Developer?

    Does someone know the advantages and disadvantages of using TOAD for Oracle and Oracle SQL Developer?
    I work making reports with TOAD, but in a few days I will have to use the SQL Developer (because it´s free) unless I justify the necessity of using TOAD.
    Could some that used both compare them?
    Thanks,
    Facundo.

    Hello Facundo,
    since we are rolling out new client PCs we switch from Toad to SQL Developer. Therefore I'm doing some training for the "normal" users and our developers.
    Most users simply want to have access to the data in tables and views. For those there are 2 main issues:
    - Filters get lost when exiting table while sorting is still applied. Since there is no way to apply filtering before entering the data tab this can become a great performance issue because sorting is applied to many many rows. For views it is sometimes impossible to open the data tab.
    - Exporting date values to Excel needs some know how if you want to sort by this column in Excel, because the date is formatted as "Standard" meaning that the sorting is done as for a text column: 01.01.2009 is less than 02.01.2008. Here you have to use a workaround column with a formula (=1*<datecolumn>)
    The greatest Pro is the easy sharing of connections and reports by XML files.
    Our developers like the easy debugging in SQL Developer. Though they miss the feature that the source is compiled for debug automatically as in Toad. For this we have distributed a script that compiles any PL/SQL object for debugging.
    There are only some Toads installed for DBAs and for users that need access to tables protected by policies that require authentification by OS user since this information is not passed under every circumstance.
    Regards
    Marcus

  • E-Recruiting: Problems with search profile and serach templates

    Hi Recruiting-Experts,
    I´m facing problems with "Search Profiles" and "Search Templates"
    (Customizing SPRO --> SAP-E-Recruiting --> Recruitment --> Talent Warehouse --> Candidate --> Candidate Search )
    Out customers wants me to add a new search criterion to the talent search. It's a customer-field (type 'd' --> Date)  belonging to infotype 5106.
    Unfortunately, it doesn't work. The hit list is always empty.
    What I did:
    Customizing (see above)
    Updated search profile (report RCF_RECREATE_SEARCH_PROFILES)
    The result:
    I can see and choose the new search criterion on talent warehouse search site (recruiters startpage)
    I can find the data (internal format yyyymmdd) via transaction SKPR07 (see XML below, ZZEARLIEST_ENTRY 20090901)
    By the way, the hit list is also empty when adding and searching for birthdate.
    Has it got to do with the date stored in internal format?
    Thanks for any comments / help.
    Regards
    CHRIS
    =========================================================================

    Hi Sebastian,
    thanks for your quick answer.
    That's why I didn't get it done for hours yesterday.
    Thanks again,
    Regards
    CHRIS

  • Problems with ListViews Drag and Drop

    I'm surprised that there isn't an Active X control that can do this more
    easily? Would
    be curious to find out if there is - although we aren't really embracing the
    use of
    them within Forte because it locks you into the Microsoft arena.
    ---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 02/03/98 01:33
    PM ---------------------------
    "Stokesbary, Michael" <[email protected]> on 02/03/98 12:19:52 PM
    Please respond to "Stokesbary, Michael" <[email protected]>
    To: "'[email protected]'" <[email protected]>
    cc:
    Subject: Problems with ListViews Drag and Drop
    I am just curious as to other people's experiences with the ListView
    widget when elements in it are set to be draggable. In particular, I am
    currently trying to design an interface that looks a lot like Windows
    Explorer where a TreeView resides on the left side of the window and a
    ListView resides on the right side. Upon double clicking on the
    ListView, if the current node that was clicked on was a folder, then the
    TreeView expands this folder and the contents are then displayed in the
    ListView, otherwise, it was a file and it is brought up in Microsoft
    Word. All this works great if I don't have the elements in the ListView
    widget set to be draggable. If they are set to be draggable, then I am
    finding that the DoubleClick event seems to get registered twice along
    with the ObjectDrop event. This is not good because if I double click
    and the current node is a folder, then it will expand this folder in the
    TreeView, display the contents in the ListView, grab the node that is
    now displayed where that node used to be displayed and run the events
    for that as well. What this means, is that if this is a file, then Word
    is just launched and no big deal. Unfortunately, if this happens to be
    another directory, then the previous directory is dropped into this
    current directory and a recursive copy gets performed, giving me one
    heck of a deep directory tree for that folder.
    Has anybody else seen this, or am I the only lucky one to experience.
    If need be, I do have this exported in a .pex file if anybody needs to
    look at it more closely.
    Thanks in advance.
    Michael Stokesbary
    Software Engineer
    GTE Government Systems Corporation
    tel: (650) 966-2975
    e-mail: [email protected]

    here is the required code....
    private static class TreeDragGestureListener implements DragGestureListener {
         public void dragGestureRecognized(DragGestureEvent dragGestureEvent) {
         // Can only drag leafs
         JTree tree = (JTree) dragGestureEvent.getComponent();
         TreePath path = tree.getSelectionPath();
         if (path == null) {
              // Nothing selected, nothing to drag
              System.out.println("Nothing selected - beep");
              tree.getToolkit().beep();
         } else {
              DefaultMutableTreeNode selection = (DefaultMutableTreeNode) path
                   .getLastPathComponent();
              if (selection.isLeaf()) {
              TransferableTreeNode node = new TransferableTreeNode(
                   selection);
              dragGestureEvent.startDrag(DragSource.DefaultCopyDrop,
                   node, new MyDragSourceListener());
              } else {
              System.out.println("Not a leaf - beep");
              tree.getToolkit().beep();
    }

Maybe you are looking for

  • Usage reports are not getting in site collection level

    Verifiedthatusage data collection is enabled. Verified that Analytics Usage, Feature Use, and Page Requests are selected under the Events to Log. Verified that jobs Microsoft SharePoint Foundation Usage Data Import and Microsoft SharePoint Foundation

  • Search iView instead of KM Navigation iView

    Hi, the guide "How To... Tune the Performance of Knowledge Management" recommends to use Search iViews instead of KM Navigation iViews for performance reasons. Can someone please explain how to configure these iViews? The Search iViews we use provide

  • Can anyone recommend a Hard Drive handycam?

    Apologies for reposting this, however my original post was misleading. I had put HD handycam (which in the real world means high def) when I meant HDD (hard disk drive). Here is my corrected post: Can anyone recommend a Hard Disk Drive handycam that

  • Creating KEYS for a HashMap property of dynaAction form in jsp

    Hii Javaties I am developing a view customization module, where the view can be customized by the user . My view generally contains data from the join of two tables. Now to customize this view, i am providing a link (a action--viewColumns.do), this a

  • Cannot create BPEL domain in SoaSuite 10.1.3.5.0

    Hi all, I'm having problems creating BPEL domains. Here's my situation: I installed a fresh Soa Suite 10.1.3.1 on a Windows environment and upgraded to 10.1.3.5.0. Before patching to 10.1.3.5.0 creating BPEL domains works fine. However, after the upg