JCO connection for Meta Data fails

Hi,
I have installed the WebAS Preview version with SP9. I had installed it once and had succesfully configured the JCo connection to my R/3 system. After I re-installed the WebAS after a system format, I have configured the JCo for both model & metadata. Both are configured to connect to the same R/3 sytem with the same user/password combination. But the JCo connection for model data pings and test come OK. But the one for metadata fails (ping as well as test).
I have tried creating more JCo connections with different names, but again the model one works, but not the metadata one.
Can anyone figure out why this is happening?
Regards,
Sumith.

Hi,
The error that I get when testing the JCo connection is:
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=ltilsap GROUP=PUBLIC R3NAME=LTI MSSERV=sapmsLTI PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR service 'sapmsLTI' unknown TIME Fri Jan 21 16:37:40 2005 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -3 MODULE ninti.c LINE 494 DETAIL NiPGetServByName2: service 'sapmsLTI' not found SYSTEM CALL getservbyname_r COUNTER 1
and when I ping it gives:
Failed to ping JCo destination 'LTI_WDMETADATA_DEST'.
But the connection for model data works perfectly for the same set of configuration.
Thanks & Regards,
Sumith

Similar Messages

JCo connection for the application data

Dear All,
Now, we configure BP for MSS. When we set JCo connection for the application data, from this link http://help.sap.com/saphelp_erp2005/helpdata/en/29/d7844205625551e10000000a1550b0/frameset.htm we selected the method "Ticket".
When we run the page in "Team" area, we found some errors as follow:
- You do not have the authorization to start service sap.com/pcui_gp~isr/IsrStatusoverview
- You do not have the authorization to start service sap.com/mssreccand/CandidateStatusOverview
- Pages about "Employee Information" display Blank iViews.
But if we set JCo connection for application data by using "User/Password" method (UserID have "SAP_ALL" profile in back-end system), the application work fine.
Kindy advise us which method should be used to set JCo connection (Ticket or User/Password).
If the method should be "User/Password", please advise authorization and user type for UserID that be used to map JCo connection.
Thank you very much,
Anek.

Hi,
Go through the contents in,
http://help.sap.com/saphelp_ep60sp2/helpdata/en/8f/67d27676ace84080964d4c4223bb3c/content.htm
Hope this helps !
Regards
Srinivasan T

Error while creating jco connection for metadata?

Hi all,
we are using ep 6 sp 16.
I could create the JCO connection for application data but i am not able to create the jco connection for metadata for the same r3 server .
while creating the the connection
system name and logon group and disable
and when i click finish
it is giving following error
Failed to create new JCO client connection testmetadata: com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscapeException: Error while obtaining JCO connection. at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:150) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.createJCOClientConnection(SystemLandscapeFactory.java:356) at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.createJCOClientConnection(WDSystemLandscape.java:107) at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionFinish(ButtonBar.java:224) at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:265) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleAction(WebDynproMainTask.java:101) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:304) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:659) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59) at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:180) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve connection parameter for testmetadata at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter4MsgServerJCODestination(JCOClientConnection.java:670) at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter(JCOClientConnection.java:486) at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.init(AbstractJCOClientConnection.java:252) at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.<init>(AbstractJCOClientConnection.java:226) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:148) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.createJCOClientConnection(SystemLandscapeFactory.java:356) at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.createJCOClientConnection(WDSystemLandscape.java:107) at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionFinish(ButtonBar.java:224) at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:265) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleAction(WebDynproMainTask.java:101) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:304) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:659) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59) at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:180) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: java.lang.NullPointerException at java.util.Hashtable.put(Hashtable.java:606) at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter4MsgServerJCODestination(JCOClientConnection.java:564) at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter(JCOClientConnection.java:486) at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.init(AbstractJCOClientConnection.java:252) at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.<init>(AbstractJCOClientConnection.java:226) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:148) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.createJCOClientConnection(SystemLandscapeFactory.java:356) at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.createJCOClientConnection(WDSystemLandscape.java:107) at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionFinish(ButtonBar.java:224) at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:265) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleAction(WebDynproMainTask.java:101) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:304) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:659) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59) at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:180) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Thanking.
Rajendra

Hello Rajendra,
Good to hear from u. Let me try to give a soln for this problem of yours.
I think probably the logon group has not been specified in the backend.If thats the case then do the following:
Connect to the backend server for which you are trying to create the JCO. Run the transaction SMLG. It will show u the existing logon groups. carry out the following steps if the 'PUBLIC' group is not present in the list of logon groups.
Click on the create button. In the pop-up, type the logon as 'PUBLIC'. For the instance, select the F4 help and choose the existing instance number. Click on copy and click save. Try running the transaction /nsmlg and now it should show the logon group 'PUBLIC'.
When you create the JCO connection, it should now show the logon group 'PUBLIC'.
Regards,
Prathamesh.

Connection for Source DataConnection failed because the enviroment is not trusted

Keep getting the error "Connection for Source DataConnection failed because the enviroment is not trusted. I have searched the internet and have not found a solution to this problem. Anyone know a way around this? Trying to connect a live cycle form and an Access database....I am at the end of my rope here...
TIA@

There are browser settings that control whether you allow getting data from other sources (than where the current page is loaded). In preview you are loading the PDF in an browser ActiveX control so that is why this is coming up. You may also have to add the other server name to your trusted site list in the browser.

JCO Connection for web-dynpro tutorials (EP 6.0 SP9 downlaod from SDN)

Hello,
I have a question regarding JCO connections for web-dynpro example/tutorials. I have installed WAS 6.40 sneak preview from EP 6.0 SP9 download from SDN. Installation instruction says: Choose "No SLD available"
but the web-dynpro example/tutorial asks to create JCO connections by going to web-dynpro -> content admin..etc on http:<host>:50000..Here, all the tabs relating to creating JCO connections appear to be "protected" on my screen. so I can't do anything further. By going to http:<host>:50000/sld, I also tried to add SLD server..but that is not helping. There is some "import" button, but which CIM file (in which folder etc) am i supposed to import for a simple test system? What are the steps for a bare minimum setup so that I can use the WAS 6.20 system at work-place as my backend & try out the web-dynpro examples? Do I really need SLD setup? Where is documentation about all this after one installs the WAS 6.40 JAva? I was expecting it somewhere at least in the eclipse IDE help-documentation..None of the web-dynpro tutorials explain this !
thanks

Thanks everybody.
NagaKishore, after doing all the steps, when I goto
localhost:50000-> web dynpro -> content administartor, and try to "maintain JCO Destinations" I am getting this error: (full stack trace not included)
An error has occurred:
"Failed to process the request."
Please contact your system administrator.
Error stacktrace:
java.lang.NullPointerException
 at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:871)
 at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:485)
 at com.sap.tc.webdynpro.tools.explorer.JCOConnectionsDetails.updateJCOClientStatus(JCOConnectionsDetails.java:438)
 at com.sap.tc.webdynpro.tools.explorer.JCOConnectionsDetails.addJCOClientToList(JCOConnectionsDetails.java:634)
 at com.sap.tc.webdynpro.tools.explorer.JCOConnectionsDetails.addJCOClientToList(JCOConnectionsDetails.java:598)
 at com.sap.tc.webdynpro.tools.explorer.JCOConnectionsDetails.wdDoInit(JCOConnectionsDetails.java:120)
 at com.sap.tc.webdynpro.tools.explorer.wdp.InternalJCOConnectionsDetails.wdDoInit(InternalJCOConnectionsDetails.java:238)
 at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
 at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)

Storing multipl values for meta data in DOCUMENT_META_DATA

Hi,
We currently have 3 content types in our system: news, announcements, and events.
They are currently stored in 3 different tables. We want to make this content
available via the various CM (select) and PZ tags (contentquery, contentselector).
I'd like to avoid writing my own doc provider (file:///D:/bea7/weblogic700/wlp/docs70/dev/conmgmt.htm#999019)
and instead would like to begin to publish document data directly to the reference
implementation tables (DOCUMENT and DOCUMENT_METADATA).
It seems like I should be able to do that with one exception. It doesn't seem
like we can store multiple values for meta data attributes. If you take the out
of the box p13n example, a lot of the data is tagged with 'genre' = Something
(i.e. Rock, Hip-hop, etc). Then content queries use this genre to personalize
pages.
What if I have a band that has multiple genres? What if I want to tag my band
as Rock and Hip-hop? And then also want that band to appear on both a Rock lovers
and a Hip hop groupies page? Is this possible with the default implementation?
I know when I tried entering multiple 'genre' meta data values for a same document
ID, it gave me a PK constraint violation. Any other trick around this?
Thanks,
Will Young
ps. using weblogic 7...

Yes Subler http://code.google.com/p/subler/ does support adding the HD tag.
On the Mac I wouldn't use anything but Subler for tagging, best UI, best metadata lookup, best underlying libraries for mp4 files (I'm biased on the libraries part).
Cheers Ed.

URL for meta data HTML

Hi
Does anyone know the URL on WAS for html generated for meta data rep?
http://wasxyz:port/sap/bw/ ?????
Thanks in adv.

Hi,
please have a look on the online documentation
http://help.sap.com/saphelp_nw04/helpdata/en/a2/3dd83fbd27ea34e10000000a1550b0/frameset.htm
Heike

Settings SLD and JCO connection for Java Web Dynpro

Hi BI Gurus,
I'm a Business Intelligence newbye and I'm a bit confused about Web Dynpro configurations.
I try to execute, through Netweaver Developer Studio 7, a simple java Web Dynpro who call the standard Flight List BAPI.
My configuration is: NW 2004s installed on BI server (with java instance and j2EE Server) and Flight List BAPI stored on R/3 ECC. 5 System in another server.
Now, my doubt are:
1) in SLD Data Supplier (J2EE Visual Admin on BI Server) CIM configuration, what are the connections parameter necessary?The BI host or R/3 host?
2)if I set BW system parameters in SLD and in NWDS when I try to run my simple web dynpro an error occour This is the output:
The initial exception that caused the request to fail, was:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve JCO destination name 'WD_FLIGHTLIST_RFC_METADATA_DEST' in the SLD. No such JCO destination is defined in the SLD.
Correction Hints
Accessing the System Landsape Directory (SLD) failed. Depending on the concrete reason (see root cause) check the following:
is the SLD Supplier in the J2EE engine configured correctly? See the SLD documentation for more details about the SLD and about how to configure it.
are all JCO destinations maintained correctly? Use the preinstalled Web Dynpro Content Admin application to check/edit the destination. Use the Ping and Test functions of the Content Admin to verify that each destination is properly configured.
Additional information about the System Landscape Directory and the Web Dynpro Content Admin can be found in the SAP Developer Network (SDN) and in the Online Help for the SAP Web Application Server (installed with SAP NetWeaver Developer Studio and available online).
Note: the above hints are only a guess. They are automatically derived from the exception that occurred and therefore can't be guaranteed to address the original problem in all cases.
3)where can I create new JCO connections?What are the requirements settings?
I am always available for answers about the post!!
Help me please!!
Thanks thousand and sorry for my incorrect english!!

Andrea,
You can Create the JCo destination from Content Administrator. You must login as Administrator.
use the link as
http://<server>:<port>/webdynpro/welcome/Welcome.jsp, select Content Administator->Create JCo Destinations/Maintain JCo Destinations.
Please have a look on the following links regarding creating/maintaining JCo destinations. The are usally asked questions regarding JCo destinations.
Create JCo destinations:
/message/4947478#4947478 [original link is broken]
Creating JCO Destinations
/message/5369333#5369333 [original link is broken]
Rgs,
Dni

Connection for srouce dataconnection failed because the environment is not trusted

HI all I keep gettng this message when I
preview the page
i get this message that sayd he the connection for the source dataconnection failed because the environment is not trusted
can anyone help??

Here is a blog entry that discusses how to deal with getting specific records etc....
http://forms.stefcameron.com/2006/09/29/selecting-specific-database-records/
Note at the bottom of the blog he mentions new security rules in version 8. Make sure you follow that link and look at the section on cloning ....you will need to do that in your script.
Once you are on that blog you can search for your "Environment not Trusted" error. There were a couple of hits in the Q/A sections at the bottom of the blog. There is no definitive answer but there was a couple of suggestion there.
Also if you go a google serach on "Environment not Trusted" there are numerous hits on different discussion forums. You may get your answer from one of those. If you find the answer can you post it back here please?
paul

Unable to create JCO connections for ESS self service

Hello SDN,
I am configuring the ESS for an EP 7.0 and a ECC 6.0(EP and ECC are combined in one instance).
I need to configure some JCO connections at:
http://host:port/webdynpro/dispatcher/sap.com/tcwdtools/Explorer
But i cannot create any JCO connection from there. I filled in all fields that are necessary. But I keep receiving this error messages:
MsgServerName is not defined.
SystemName is not defined.
LogonGroupName is not defined.
Which is strange because I have defined the right message server. The SLD connection to the SLD is working fine. I have upgraded the SLD and the EP java stack to SP 9.0 which is the highest level.
Does anyone know the solution for this problem?
Thanx in advance,
Regards,
Bart

Hi ,
Add logon group Public in the tx smlg then execute tx RZ70 then try to create RFC destination
Regards,
Sreekantha

Try to use dynamic sql connection for additioal data for xml publisher

I understand that the xml publisher is using template to merger the xml data output (say from Oracle report).
We have some Oracle seeded report and do not wish to modify these report, but we do need to add additional data to these reports. In the past, the tool we used has the capability to make dynamic sql calls to get these additional data. Can this be achieved in xml publisher?
I did noticed that the template builder has two options for upload data source: from a data file or from a sql connection, but seems they can not be used together. Not much document I can find for this. Thank you in advance for your help.
Frank

Hi All,
Sandeep: if u have the solution pls send to my email id [email protected]
ill really appriciate u r response.
I have the same requirement to develop AR Invoice Report in XML publisher, actually it was developed using Optio Layout.my issue is the actual AR Invoice RDF contains 20 records and it showing the 20 recodes when we run that program (concurrent program output) after that while printing this report uisng the OPTIO layout (The Optio system is fetching some more records (10 records)) it printing total 30 records. i mean here the OPTIO is handling some pl/sql code i guess..
so now how we can handle this requirement using XMLP.I am using RTF Templates with 5.6.2 v. Is it possible to do the same manner how the OPTIO was doing. Is this possible with any other Templates ?. or we need to customize the RDF itself ? .but I know that I can go ahead and modify the existing out-of-the-box report, but I do not want to do that. I do not have control over the XML that is generated since the XML is generated when the report is run. Is there any way to retrieve the extra information AFTER the xml has been generated and BEFORE the template is applied ?
Thanks,
Rad

Cannot maintain JCO connection for webdynpro application in Portal Admin

I cannot create or modify the JCO connection in Portal Content Admin->the application.name while executing webdynpro application.
There should be a red or green icon Butr in my case for my application ,
The create or test is disbaled .Colored icon is not there.
I am using SAP sneak preview and its first time.Should I check SLD settings.Pls help.
George

how to maintain it?
accidently deleted SLD form localhost/sld url and now i cannot change or add the sld.It gives page cannot be displayed.PLs advice how to fix it or should i reinstall it?
George

Add-On connection for Journal Entry - Failed to Connect to SBO Common

We have a customer (SAPBO 2005A SP01 PL29) with some specific requirements that required an add-on running in the background to monitor the addition of Goods Receipt PO's to the system. When the GRPO is successfully added, the Add-On will (behind the scenes) create an appropriate Journal Entry through the SAP DI. One of the issues that we encountered during the development of this functionality was that when it was tested by users, they weren't authorized to access the Financials module or the Journal Entry screen. What we ended up doing was creating a secondary connection (vCompany) in the DL pulling the information from the encrypted user information from SAP the Add-On used to connect, but utilizing a management level user ID and password. Once that connection has been made, the Journal Entry is added through the DI and that secondary connection is disconnected.
The problem that we're encountering is this. When the users are logged into SAP Client with an regular user, and the GRPO adds, the secondary connection fails and returns a message of "Failed to Connect to SBO-Common". However, if the user is logged into SAP as an adminitrative level user and the GRPO is added, the secondary connection is successful and the Journal Entry is created. The secondary connection is strictly used for the JE. Here's the code (VS.Net 2005) for the secondary connection:
vCompany = New SAPbobsCOM.Company
vCompany.UseTrusted = True
vCompany.language = SAPbobsCOM.BoSuppLangs.ln_English
vCompany.CompanyDB = oCompany.CompanyDB
vCompany.UserName = "XXXXX"
vCompany.Password = "YYYYY"
vCompany.Server = oCompany.Server
vCompany.DbServerType = SAPbobsCOM.BoDataServerTypes.dst_MSSQL2005
lRetConnect = vCompany.Connect()
Where "XXXXX" would be the appropriate management level SAP User Name and "YYYYY" would be that users password.
Has anyone else had this kind of issue where you needed a secondary connection with management level access behind the scenes to accomplish something in SAP and had problems getting it to connect? Any thoughts or ideas would be greatly appreciated.

Hi Dennis,
what you can try is to make a untrusted connection
oCompany.UseTrusted = False
and set the DBUser and Pwd
oCompany.DbUserName = "sa"
oCompany.DbPassword = "insertpwd"
lg David

Establishing Database connection for XML Data Definition?

I have a XML Data Definition which will query data from Oracle Database.
I did some research and tried few setting options in JDeveloper (11g), but had no luck on finding a way to connect to Database.
My goal is to use JDeveloper to run a XML Data Definition against Database and generate a XML File with data.
Can this be done?
Data Definition:
<?xml version="1.0" encoding="WINDOWS-1252"?>
<dataTemplate name="XX_ATT_VALIDATION" description="description"
dataSourceRef="MTS-AT"
version="1.0">
<properties>
 <property name="include_parameters" value="false" />
 <property name="include_null_Element" value="true" />
 <property name="include_rowset_tag" value="false" />
</properties>
<parameters>
 <parameter name="p_batch_id" dataType="character"/>
</parameters>
<dataQuery>
 <sqlStatement name="Q_HEADER_VALUES">
 <![CDATA[
select distinct
sci.bill_cycle,
to_char(sci.bill_date,'mm/dd/yyyy') bill_date,
to_char(sysdate,'mm/dd/yyyy') report_run_date
 from st_cm_interface sci
 where sci.record_type='05'
 and sci.batch_id=:p_batch_id
 ]]>
</sqlStatement>
<dataStructure>
 <group name="G_HEADER_VALUES" source="Q_HEADER_VALUES">
<element name="bill_cycle" value="bill_cycle"/>
<element name="bill_date" value="bill_date"/>
<element name="report_run_date" value="report_run_date"/>
</group>
</dataStructure>
</dataTemplate>

Hi,
Consider there is 2 database, Oracle_1 and Oracle_2.
I want to fetch some table data in Oracle_2 from Oracle_1 database Stored procedure/functions through query staments and cursors. How to establish the Oracle_1 DB connection in Oracle_2 DB stored procedure/function. Is it possible?
It's not the same how you implement the programs in java or .Net to create DB connection. It's different over here. You have use the DataBase Links in order to make to connection with another DB and use that Link in the stored procedure or function where ever its necessary as per your requirement.
- Pavan Kumar N

JCO connection for the metadata - account permissions????

Hello All,
This is our first try at adaptive RFC and I'm trying to instruct our security people to set up a user account for jco metadata and have forwarded lots of excerpts from docs like ESS setup, etc., and generally that this user needs access to a all DDIC function modules. Our security people aren't getting it, and I can find nothing specific in an documents I find on specifically how to set up that account, and don't want to give SAP_ALL.
Any help is appreciated.
Thanks,
Doug

Hi Doug,
You are correct regarding the JCO destination metadata setup, and you can check the official SAP documentation for <a href="http://help.sap.com/saphelp_nw04/helpdata/en/3a/3b1b40fcdd8f5ce10000000a155106/frameset.htm">SAP JCO Destination Setup</a> (see section 5 for user authentication requirements)
Bottom line, you have to set up a user type 'System' (no dialog authorization) in the back end, and its authorizations must be set so that this user can access all DDIC function modules.
I would suggest that you either try to:
- Determine with your security group a new authorization profile that would allow a new system user to access all required DDIC modules
OR
- Check user 'SAPJSF' with role 'SAP_BC_JSF_COMMUNICATION' (if possible/compatible with your environment), and test if you can execute your application with this user initially.
If successful, then ask your security group to create a new system user, copy & customize the role 'SAP_BC_JSF_COMMUNICATION' and assign it to your new user so you can assign it for the JCO destination METADATA authentication configuration section.
Regards,
Joseph
Message was edited by:
Armin Reichert

JCO connection for Meta Data fails

Similar Messages

Maybe you are looking for