JCO data in WD application

Hi,
Can you explain me the concept of "USER MAPPING" JCO and how it is different from the concept when we want to send the user logon data (like client, user ID and Password) via the WD application.
I have a WD application in which I am using the JCO API to get the connection to the R/3 system and fetch the data. Do I need to necessarily define a JCO for this application (while importing Model)?
The r/3 user ID for this user has be hardcoded in WD application and not maintained in the portal User Mapping screen.
Any help in this direction will be appreciated.
Regards
Puneet

Hi Puneet,
We had a requirement in which we wanted to multiple J2EE users to use the same R/3 User.
We had a detailed discussion on this with SAP here in Singapore. The outcome was that we are not supposed to use it since it voilates the User license agreement.
We have asked for a official note asking "What are the scenarios in which we should use User Mapping?" and waiting for the same.
Hence we should not use the "User Mapping" for above described scenarios.
You need to define a JCO Connection while importing the model because otherwise you cannot create a model. At runtime it use the connection details from this JCO. Anyways you can change the name of the JCO in the model later.
Also I think its possible to create your own JCO and use it at runtime by changing the JCO name linked to the model.
Hope this helps.
Regards,
Shubham

Similar Messages

JCo connection for the application data

Dear All,
Now, we configure BP for MSS. When we set JCo connection for the application data, from this link http://help.sap.com/saphelp_erp2005/helpdata/en/29/d7844205625551e10000000a1550b0/frameset.htm we selected the method "Ticket".
When we run the page in "Team" area, we found some errors as follow:
- You do not have the authorization to start service sap.com/pcui_gp~isr/IsrStatusoverview
- You do not have the authorization to start service sap.com/mssreccand/CandidateStatusOverview
- Pages about "Employee Information" display Blank iViews.
But if we set JCo connection for application data by using "User/Password" method (UserID have "SAP_ALL" profile in back-end system), the application work fine.
Kindy advise us which method should be used to set JCo connection (Ticket or User/Password).
If the method should be "User/Password", please advise authorization and user type for UserID that be used to map JCo connection.
Thank you very much,
Anek.

Hi,
Go through the contents in,
http://help.sap.com/saphelp_ep60sp2/helpdata/en/8f/67d27676ace84080964d4c4223bb3c/content.htm
Hope this helps !
Regards
Srinivasan T

MathScript Nugget #19: Sharing Data With Other Applications

In MathScript Nugget #18, we looked at ways to transfer data between MathSript and the rest of LabVIEW. In today's nugget, we'll see some of the different ways that MathScript can share data with programs besides LabVIEW.
The most common way to share data between programs is by reading and writing files. MathScript supports several file formats that are recognized by other programs. The ones we'll touch on in this nugget are MLV, MAT, CSV, TXT, TDM(S) and XLS.
The easiest way to bring data into MathScript is with the 'load' function. The help topic for this function does a great job of explaining it. The load function will bring in a group of variables that have been saved to a file earlier. The most common formats that load supports are:
MLV files created with MathScript save function
MAT files created with version 6.0 or earlier of The MathWorks, Inc. MATLAB® software
TDM and TDMS binary measurement files created in LabVIEW or DIAdem
The load and save functions are great for storing off a group of variables to be used again in a future session of MathScript. You can do the same thing using the Operate>>Load Data... and Operate>>Save Data... menu items in the MathScript Window. These support the same file formats as load and save.
The best formats to use if you want to share data with other applications are TXT, CSV, and XLS. MathScript has special funcitons to read and write each of these formats. The functions, such as fread_csv and fwrite_xls, are all members of the support class.
The last way to read and write data files with MathScript is to use a custom file format. MathScript supports common file operations like fread and fwrite. You can use these functions to create or import files of any binary or textual format.
There's one last way to move data out of MathScript without using files. You can copy data from the MathScript Window or MathScript Probe as tab-delimited text to your OS clipboard. You can then paste this text to a text editor or spreadsheet program.
Hopefully now you have an idea of the many ways to move data into and out of MathScript.
MATLAB® is a registered trademark of The MathWorks, Inc.
jattas
LabVIEW MathScript R&D
ps Check out more MathScript Nuggets!

TDM and TDMS are also excellent file formats to share your data with other applications. National Instrumenst offers free libraries and add-ins to access TDM and TDMS files with e.g. Excel, OpenOffice Calc or The MathWorks, Inc. MATLAB® software. Have a look at this page to
Find Resources for Reading and Writing TDMS Files in Third-Party Products

Why files in Lightroom mobile and files in the creative cloud not the same? idea- one place(stored date) for all application ??????

Why files in Lightroom mobile and files in the creative cloud not the same? idea- one place(stored date) for all application ??????

Lightroom Mobile is not a cloud storage service. You shouldn't treat it as a way of backing up your files. You are merely storing Smart Previews of your files in the cloud space, high-quality JPEGs of your files regardless of their original format on your desktop. The point is that they are there so you can continue editing them in a Lightroom-like environment even while away from your desktop/laptop computer. The files in Lightroom Mobile can only be used in Lightroom Mobile.
This is very different from what is offered by the Creative Cloud storage, which can be used to synchronize your files between any device (that can support the individual files).
The vast difference in how each service works and its intended use is why they are separate.

How can i get my data from an application that deleted from my iphone

how can i get my data from an application that deleted from my iphone????

Which application?
With many applications, when deleting the app the app's data is deleted with it.

ABAP Code for Backup the entire table data in the application server

Hello Friends,
I have to create the table data Backup and Store the entire table data in the application server and also be able to restore the data back if needed.
this should be dynamic program for any table based on the table name given on the application server.. I have developed a program for this but its having problems with the Quantity, amount. Its not writing it correctly at the application level.
ANy Suggestions on this.
Below is the program for this.
Thanks,
Ster.
* Report YWMM_TABLE_DUMP                                             *
REPORT ywmm_table_dump .
TABLES :
        dd03l.
* Type spool declaration
TYPE-POOLS:
        abap, slis.
DATA: i_table_data1 TYPE REF TO data.
DATA : it_dd03l LIKE dd03l OCCURS 0 WITH HEADER LINE.
*DATA : gt_fieldcat TYPE lvc_s_fcat.
DATA : i_fcat      TYPE STANDARD TABLE OF lvc_s_fcat,
       l_dr_line         TYPE   REF TO data,
       l_v_as4vers       TYPE as4vers.
FIELD-SYMBOLS: <f_table_data1>     TYPE STANDARD TABLE,
               <f_wa_table_data1> TYPE ANY.
SELECTION-SCREEN: BEGIN OF BLOCK bl1 WITH FRAME TITLE text-001.
PARAMETERS: rb_copy RADIOBUTTON GROUP map DEFAULT 'X',
            rb_rest RADIOBUTTON GROUP map.
SELECTION-SCREEN: END   OF BLOCK bl1.
SELECTION-SCREEN: BEGIN OF BLOCK bl2 WITH FRAME TITLE text-002.
PARAMETERS: p_table TYPE tabname OBLIGATORY,
            p_plfld TYPE dd03l-fieldname.
SELECTION-SCREEN SKIP 1.
PARAMETERS: p_bkfile TYPE localfile OBLIGATORY.
SELECTION-SCREEN: END   OF BLOCK bl2.
PERFORM get_data.
IF rb_copy = 'X'.
PERFORM backup.
ELSEIF rb_rest = 'X'.
PERFORM database_update.
ENDIF.
*&      Form get_data
FORM get_data.
CLEAR   i_fcat.
REFRESH i_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
       EXPORTING
            i_structure_name = p_table " Table Name
       CHANGING
            ct_fieldcat      = i_fcat
       EXCEPTIONS
            OTHERS           = 1.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
    it_fieldcatalog = i_fcat
IMPORTING
    ep_table        = i_table_data1.
IF sy-subrc = 0.
    ASSIGN i_table_data1->* TO <f_table_data1>.
ELSE.
    WRITE: 'Error creating internal table'.
ENDIF.
IF rb_copy = 'X'.
    SELECT * FROM (p_table) INTO CORRESPONDING FIELDS OF
              TABLE <f_table_data1> UP TO 20 ROWS.
ELSEIF rb_rest = 'X'.
    CREATE DATA l_dr_line LIKE LINE OF <f_table_data1>.
    ASSIGN l_dr_line->* TO <f_wa_table_data1>.
*Get Data from Application Server
* Opening the dataset P_BKFILE given in the selection screen
    TRANSLATE p_bkfile TO LOWER CASE.
    OPEN DATASET p_bkfile FOR INPUT IN TEXT MODE." ENCODING DEFAULT.
    IF sy-subrc NE 0.
*    MESSAGE:
    ELSE.
      DO.
* Reading the file from application server
        READ DATASET p_bkfile INTO <f_wa_table_data1>.
        IF sy-subrc = 0.
          APPEND <f_wa_table_data1> TO <f_table_data1>.
        ELSE.
          EXIT.
        ENDIF.
      ENDDO.
* Closing the dataset
      CLOSE DATASET p_bkfile.
    ENDIF.
ENDIF.
ENDFORM.                    " get_data
*&      Form backup
*       text
* --> p1        text
* <-- p2        text
FORM backup.
TRANSLATE p_bkfile TO LOWER CASE.
OPEN DATASET p_bkfile FOR OUTPUT IN TEXT MODE.
IF sy-subrc NE 0.
    WRITE: text-017.
    STOP.
ELSE.
    LOOP AT <f_table_data1> ASSIGNING <f_wa_table_data1>.
      TRANSFER <f_wa_table_data1> TO p_bkfile.
    ENDLOOP.
ENDIF.
CLOSE DATASET p_bkfile.
ENDFORM.                    " backup
*&      Form database_update
FORM database_update.
DATA : i_mara_u TYPE STANDARD TABLE OF mara WITH HEADER LINE,
         i_ekpo_u TYPE STANDARD TABLE OF ekpo WITH HEADER LINE,
         i_eban_u TYPE STANDARD TABLE OF eban WITH HEADER LINE,
         i_resb_u TYPE STANDARD TABLE OF resb WITH HEADER LINE,
         i_plpo_u TYPE STANDARD TABLE OF plpo WITH HEADER LINE,
         i_stpo_u TYPE STANDARD TABLE OF stpo WITH HEADER LINE,
         i_vbap_u TYPE STANDARD TABLE OF vbap WITH HEADER LINE,
         i_vbrp_u TYPE STANDARD TABLE OF vbrp WITH HEADER LINE,
         i_lips_u TYPE STANDARD TABLE OF lips WITH HEADER LINE,
         i_afvc_u TYPE STANDARD TABLE OF afvc WITH HEADER LINE,
         i_asmd_u TYPE STANDARD TABLE OF asmd WITH HEADER LINE,
*           i_cooi_u TYPE STANDARD TABLE OF cooi WITH HEADER LINE,
         i_qmel_u TYPE STANDARD TABLE OF qmel WITH HEADER LINE,
         i_cooi_u TYPE STANDARD TABLE OF cooi WITH HEADER LINE,
         i_esll_u TYPE STANDARD TABLE OF esll WITH HEADER LINE,
         i_t165_u TYPE STANDARD TABLE OF t165 WITH HEADER LINE,
         i_t165e_u TYPE STANDARD TABLE OF t165e WITH HEADER LINE,
         i_twpko_u TYPE STANDARD TABLE OF twpko WITH HEADER LINE,
         i_tpext_u TYPE STANDARD TABLE OF tpext WITH HEADER LINE,
         i_ce4mxpa_u TYPE STANDARD TABLE OF ce4mxpa WITH HEADER LINE,
         i_ce4mxpa_acct_u TYPE STANDARD TABLE OF ce4mxpa_acct WITH
                                                         HEADER LINE,
         i_zaim_u TYPE STANDARD TABLE OF zaim WITH HEADER LINE,
         i_s012_d TYPE STANDARD TABLE OF s012 WITH HEADER LINE,
         i_s012_i TYPE STANDARD TABLE OF s012 WITH HEADER LINE,
         i_dummy TYPE STANDARD TABLE OF mara.
CASE p_table.
    WHEN 'MARA'.
*     Non-Key
      PERFORM move_to_table USING   <f_table_data1>
                            CHANGING i_mara_u[]
                                     i_mara_u.
      PERFORM update_table USING i_mara_u[].
ENDCASE.
ENDFORM.                    " database_update
*&      Form move_to_mara
FORM move_to_table USING    p_tab_from TYPE STANDARD TABLE
                   CHANGING p_tab_to   TYPE STANDARD TABLE
                            p_w_table.
DATA: l_wa_fcat TYPE lvc_s_fcat.
FIELD-SYMBOLS: <f_field_from> TYPE ANY,
                 <f_field_to>   TYPE ANY.
LOOP AT p_tab_from ASSIGNING <f_wa_table_data1>.
    LOOP AT i_fcat INTO l_wa_fcat.
      ASSIGN COMPONENT l_wa_fcat-fieldname
     OF STRUCTURE <f_wa_table_data1> TO <f_field_from>.
      ASSIGN COMPONENT l_wa_fcat-fieldname
     OF STRUCTURE p_w_table TO <f_field_to>.
      <f_field_to> = <f_field_from>.
    ENDLOOP.
    APPEND p_w_table TO p_tab_to.
ENDLOOP.
ENDFORM.                    " move_to_mara
*&      Form update_table
FORM update_table USING p_table_update TYPE STANDARD TABLE.
SELECT SINGLE *
    FROM dd03l
   WHERE fieldname = p_plfld
     AND tabname   = p_table
     AND keyflag   <> 'X'
     AND as4local = 'A'
     AND   as4vers = l_v_as4vers
     AND   ( comptype = 'E' OR comptype = space ).
IF sy-subrc = 0.
*   Do update
    IF NOT p_table_update IS INITIAL.
      UPDATE (p_table) FROM TABLE p_table_update.
      IF sy-subrc = 0.
        COMMIT WORK.
      ELSE.
        ROLLBACK WORK.
        WRITE: text-003.
        STOP.
      ENDIF.
    ENDIF.
ELSE.
*delete and insert.
    IF NOT p_table_update IS INITIAL.
*      DELETE (p_table).
      IF sy-subrc = 0.
        INSERT (p_table) FROM TABLE p_table_update.
        IF sy-subrc = 0.
          COMMIT WORK.
        ELSE.
          ROLLBACK WORK.
          WRITE: text-018.
          STOP.
        ENDIF.
      ELSE.
        ROLLBACK WORK.
        WRITE: text-018.
        STOP.
      ENDIF.
    ENDIF.
ENDIF.
ENDFORM.                    " update_table
Edited by: Julius Bussche on Jul 18, 2008 1:43 PM
Please use a meaningfull subject title!

ARS,
I am struggling a bit to get this.
there is a syntax error,
Field "FIELDS_INT-TYPE" is unknown. It is neither in one of thespecified tables nor defined by a "DATA" statement.
Again you have asked to move to a diffrent table. What is that table and how to build it.
    LOOP AT <f_table_data1> ASSIGNING <f_wa_table_data1>.
      LOOP AT i_fcat INTO l_fcat.
        IF l_fcat-inttype EQ 'P'.
          ASSIGN COMPONENT l_fcat-fieldname
              OF STRUCTURE <f_wa_table_data1> TO <f_field>
              TYPE     fields_int-type
              DECIMALS fields_int-decimals.
        ELSE.
          ASSIGN COMPONENT l_fcat-fieldname
              OF STRUCTURE <f_wa_table_data1> TO <f_field>
              TYPE     fields_int-type.
        ENDIF.
        " Move <f_field> to a new table and use this table for download
      ENDLOOP.
      TRANSFER <f_wa_table_data1> TO p_bkfile.
    ENDLOOP.
Ster

Not able to Parse XML data in Sun Application Server 8.2

Iam not able to parse the xml data in sun application server,this is working fine in tomcat and oracle server.
Please go thru the code , thanks in advance.This is used in ajax.
function processStateChange() {
if (req.readyState == 4) { // Complete
if (req.status == 200) { // OK response
     var message=req.responseXML.getElementsByTagName("value")[0];
          setMessage(message.childNodes[0].nodeValue);
//document.getElementById("theResponse").innerHTML = req.responseText;
          else
alert("Problem: " + req.statusText);
          return true;
     }

Use Notepad. Drag and drop in notepad.
Aman

Move data from one Application to another Application.

Hi All,
I have a requirement to move data from one Application to another Application(we are working on SAP BPC 5.1/7.1 MS version).
Can anybody please mention all the possible ways to achieve it.
Thanks in advance.
Regards
Vani

Hi,
The best way to do this would be to use destination_app statement. Please refer to the below link from help.sap:
http://help.sap.com/saphelp_bpc75/helpdata/en/79/b299446e02478fa5eca684d1297ef3/content.htm
Alternatively, you can definitely export the data from one application and import it to the second.
Hope this helps.

Best way To get data from another application using NDDE lbrary

My vb.net application gets data from another application using NDDE Library. I got stocks prices (open,high,low,close,volume,change......(about 15 records for each stock)) (about 200 stocks) . I don't know if there is a problem in my code.
This is my code:
l : is the list of stocks.
This Sub connects to server and requests the data :
Public Shared Sub GetQuotes()
Try
client1 = New DdeClient(server, topic)
client1.Connect()
For i As Integer = 0 To l.Count - 1
client1.StartAdvise("QO." & l(i).t & ".TAD$last", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$open", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$high", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$low", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$pclose", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$volume", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$date", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$time", 1, True, 60000)
Next
Catch ex As Exception
MsgBox(ex.Message)
End Try
End Sub
and then I get the data from Client_advise sub (called each time a value changed )and fill the list. What I know is that client advise gets only one record for single stock each time is called..
Example: for stock AAPL. 1st time enters client_Advise I get open price for AAPL, 2nd time I get high price for AAPL,3rd time I get low price..... and I update the value in the List (l)
This the client_Advise Sub:
Private Shared Sub client1_Advise(ByVal sender As Object, ByVal e As NDde.Client.DdeAdviseEventArgs) Handles client1.Advise
For q As Integer = 0 To l.Count - 1
If l(q).t = w(1) Then
Dim item() As String = e.Item.Split("$")
If l(q).Open = "#" Then
l(q).Open = "0"
End If
If l(q).hi = "#" Then
l(q).hi = "0"
End If
If l(q).lo = "#" Then
l(q).lo = "0"
End If
If l(q).Close = "" Or l(q).Close = "#" Then
l(q).Close = "0"
End If
If l(q).pclose = "#" Then
l(q).pclose = "0"
End If
If item(1) = "open" Then
l(q).Open = Format(Val(e.Text), "0.00")
ElseIf item(1) = "last" Then
l(q).Close = Format(Val(e.Text), "0.00")
ElseIf item(1) = "high" Then
l(q).hi = Format(Val(e.Text), "0.00")
ElseIf item(1) = "volume" Then
l(q).Volume = Val(e.Text)
ElseIf item(1) = "low" Then
l(q).lo = Format(Val(e.Text), "0.00")
ElseIf item(1) = "pclose" Then
l(q).pclose = Format(Val(e.Text), "0.00")
If l(q).pclose <> "" And l(q).pclose <> "#" And l(q).Close <> "" And l(q).Close <> "#" Then
l(q).c = Format(l(q).Close - l(q).pclose, "0.00")
l(q).cp = Format(((l(q).Close - l(q).pclose) / l(q).pclose) * 100, "0.00")
End If
l(q).flag1 = 2
ElseIf item(1) = "date" Then
l(q).Date1 = e.Text
ElseIf item(1) = "time" Then
l(q).Time = e.Text
End If
Exit For
End If
Next
End Sub
Am I doing something wrong which inreases CPU usage to 80 or 90 % ?
Thanks in advance.

Hi MikeHammadi,
According to your description, you'd like to get data from another app using NDDE library.
When using the NDDE library, the CPU usage is high. As the NDDE library is third-party library, it is not supported here. I suggest you checking if the problem is caused by the NDDE library.
If you'd like to get data from another app. I suggest you could save the data in the dataBase, and then read it in another application if necessary.
If you have any other concern regarding this issue, please feel free to let me know.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Defining and Viewing BLOB Data in Oracle Application Express 3.2

Hello All,
There is a nice tutorial for working with images in Application Express 3.1 entitled "Defining and Viewing BLOB Data in Oracle Application Express 3.1". I have 3.2 and I am finding that I can't follow this tutorial... Is there any similar how to for 3.2?
Thank you,
Daniel

Hi,
I have just gone through the first steps in my OTN workspace app, and I do get the Implementation option (showing Interactive or Classic). In fact, my page at this point matches exactly the image shown in the tutorial.
My OTN workspace app uses Apex version 3.2. The Interactive reports are relatively new, so older versions of Apex would not have this option. But you say that you are using version 3.2? If you just try to create a report page on, say, EMP, do you get the option to select Interactive or Classic?
Andy

Upload the Special Purpose Ledger Data Using GB01 Application Trough BAPI

Hi Experts,
I need to Upload the Special Purpose Ledger Data Using GB01 Application Trough BAPI
Can anybody help me Which BAPI is available for this application.
plz give me the Guidence Which steps Should i follow this.
Thanks Inadvance

try these
JV_GB01_DOCUMENT_POST.
JV_GB01_DIRECT_INPUT this fm is used to to post directly to SPL
or try BAPI_ACC_DOCUMENT_POST
BAPI_ACC_GL_POSTING_CHECK
BAPI_ACC_GL_POSTING_POST

Passing data from PCUI application to BSP page

Hi,
From CRM PCUI application, a BSP page is called for displaying a report. The behaviour of the report has to be different based on a data (field value) in the PCUI application.
How can I pass the data from PCUI application to the BSP page?
Thanks & Regards
G.Raja

Hi Gregor,
The weblog was very useful. Thank you.
In the current scenario, in the PCUI application there is a button, on clicking which a bsp page is displayed. This is implemented via the Navigation (URL generation) in CRMC_BLUEPRINT table. In the BSP page, on entering the details and clicking on a button, different APIs have to be called based on a flag. The flag is set in PCUI application but I couldn't pass the information from there to the BSP page. Can you please let me know how I can achieve this.
Thanks & Regards
G.Raja

Authorization Object for data downloading from application server

Hi friends ,
My program downloads and uploads data from the application server .
My requirement is ,
Authorization checks should be performed on the Server directories to ensure that the user has access to read and write to the directory. It should check the s_dataset authorisation object for this.. If a user does not have the s_dataset authorisation object no upload or download should be allowed.
Can you please tell me how to deal with this ? how do we check the above condition ??
Many thanks ,
Hemant

hi,
This is not a single step process.
First of all you have to create a field for authorization for server directories from su20 and then create authorization object from su21.then define a role from pfcg with this authorization object and assign this role to user profile from su01 with values defined.
Then you have to call this authorization object in your program at selection screen.

Load data from one Application to another in BPC NW 7.5

Hi
I have a requirement to load data from One application to another application.
eg. HR Plannning to CostCenter Planning.
I am aware of a method to load data using transformation file mapping source and target dimensions and run DM package and this works fine.
However, the challenge is if i try to automate this process then i will have to hardcode the application tech name and save as variant to use that in process chain. Now, if i hardcode the tech name of the application then it might happen that during full optimization the tech name might change and the automation load will fail.
so how to handle this situation? any standard practices available?
appreciate your inputs/thoughts.
Regards.

Hi,
Exactly. The main problem is that there is no statement to transfer the data. Please take a look at the below link from help.sap:
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/f4/33f0bbc46c4a53860f1410f20ffb8b/content.htm
Since the structure of both the applications is same, you dont require add_dim or rename_dim, etc. However, you definitely need the when statement.
If you want to transfer all the records, then you can have something like
*WHEN ACCOUNT
*IS *
*REC(EXPRESSION = %VALUE%)
*ENDWHEN
Hope this helps.

Best approach to synchronize data from custom application database to EBS

Hi All,
We have requirement to synchronize data between custom application database and EBS database. Thw two database is on different location connected by 128 kbps connection.
The synchronization will do the following task :
- Download customer table from EBS (I have checked there are only 2000 rows of it)
- Up load billing data to EBS auto invoice interface table
The question is :
What approach is the best way to do this synchronization task ? some that come into my mind :
- create database link and run stored procedure to do the batch update ?
- for Customer synchronization, is it a good idea to create Materialized view so that any update to EBS customer data will be updated, refreshed nightly
- or is ther any better approach ?
Thank you very much,
xtanto

Hi,
There are two direction of synchroonization that should be done :
- RECEIVE Customers data from EBS into Custom Billing Database -> Yes, this can be done via materialized view
- SEND Billing data from Custom Billing Database into EBS database (Interface table)-> this cannot be done with materialized view
--> so how is the best way to do this under limited bandwidth (128 kbps) ?
Thank you very much,
xtanto
Edited by: xtanto on Oct 19, 2008 1:52 PM

JCO data in WD application

Similar Messages

Maybe you are looking for