JDBC Adapter - Dynamic database address

Hi,
For a JDBC recevier adapter, is it possible to specify the address of the database dynamically.
Thanks
Martin

Hi,
I dont think this is possible.
Regards,
Bhavesh

Similar Messages

Can JDBC specify dynamic Database

Now we have two DB2 database, with different IP address.
One of those is running in normal situation, if it is down, the other will automatically start.
Why this happened, how can the XI get information from the other DB? Is it possible to specify dynamic database destination in JDBC Adapter?
Thanks in advance.

Hi YiNing,
look at my answers in
Re: JDBC Problem in a Productive Sys!!!
There is also a further link to a similar problem.
Regards Mario

JDBC Adapter - Established database connection failed

Hi Guys,
we have installed the JDBC Adapter based on the How To Guide and we checked after the installation the Libaries :Cluster --> Server --> Libraries --> com.sap.aii.af.jmsproviderlib and the box Box "JARs Contained" was filled.
So in my point of view we have done everything right during the installation.
Now the developer tested theJDBC Adapter and he comes back with following Error:
Attempt to establish database connection failed with SQL error com.sap.aii.adapter.jdbc.sql.DriverManagementException: Cannot establish connection to URL "jdbc:microsoft:sqlserver://xxx.x.xx.xxx:1433; databaseName=CZZ03;":ClassNot FoundException: com.microsoft.sqlserver.jdbc.SQLServerDriver
Do you have any ideas?
Regards
Markus

Hello Markus,
To install JDBC driver follow the how to guide.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
Configuration of JDBC Adapter for SQL Server
JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
UserID and Password.
If the connection is not working find the correct port number.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
JDBC- X I - R/3 Scenario
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Thanks,
Satya Kumar
Reward Points If it is Useful..

Error while executing the stored procedure through sender JDBC adapter

Hi All,
I am getting below error while executing the stored procedure through sender JDBC adapter.
Database-level error reported by JDBC driver while executing statement 'exec SapgetNextEntity 'SalesOrder''. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.'. For details, contact your database server vendor.
what is the problem? any idea to anyone...
regards
Ramesh

hi Dharamveer,
I am not getting below statement for your reply
Try to use Refrence Cursor it will return u reference of resultset.
I mention SP like this
exec SapgetNextEntity 'SalesOrder'
SapgetNextEntity -
> SP Name
SalesOrder----
> Parameter I am passing...
regards
Ramesh

How to set "Cc" field in Dynamic Email address in Receiver JDBC adapter

I have done the configuration for setting up the dynamic email address using the XSD provided by SAP in note no 748024. It is working fine.
Michal's blog Mail Adapter (XI) - how to implement dynamic mail address. was a gr8 help in doing this.
But there is no clue of setting up of "CC" in email.
There should be "CC" in email is our bussiness requirement.
Would appreciate your helps.
with regards
Ravi Siddam

HI,
See fragment from help,
Specifications for mail attributes:
○       Under From, specify the e-mail address from which the message is sent.
○       Under To, specify the e-mail address that will receive the message. If you enter more than one address, you must separate them with a semicolon.
If you have specified an IMAP server under URL, the message is saved in the specified folder but is not sent to the receiver specified under To.
○       Under Cc, specify the other e-mail addresses to which the e-mail is to be sent.
These addresses are visible to the receiver.
○       Under Bcc, specify the other e-mail addresses to which the e-mail is to be sent.
These addresses are not visible to the receiver.
○       Enter the Subject of the e-mail message.
○       Specify whether you want to encode the content of the e-mail message. You have the following options:
■       None
■       Base64 (default value)
■       quoted-printable
Hope this helps.
Regards,
Akshay.
reward points if find useful.

How to set "Cc" field in Dynamic Email address in Receiver Mail adapter

I have done the configuration for setting up the dynamic email address using the XSD provided by SAP in note no 748024. It is working fine.
Michal's blog Mail Adapter (XI) - how to implement dynamic mail address. was a gr8 help in doing this.
But there is no clue of setting up of "CC" in email.
There should be "CC" in email is our bussiness requirement.
Would appreciate your helps.
with regards,
Ravi Siddam

Hi,
If you do not need mail package for other reasons, I suppose it is enough to provide a value in Dynamic Configuration for fields "THeaderTO" and "THeaderCC" and the select "Use Adapter-Specific Message Attributes" and "Variable Transport Binding" in receiver Mail Adapter.
see <a href="http://help.sap.com/saphelp_nw04/helpdata/en/6b/4493404f673028e10000000a1550b0/frameset.htm">SAP help</a> for more details.
Regards,
Daniele

Configuring Receiver mail adapter with dynamic email addresses

Hi,
I'm a newbie to XI and I have problems in configuring the Receiver mail adapter with the "Use Mail package" option selected. I am trying pickup a file (using file adapter on Sender side, picks up a simple XML file) and after mapping in XI, send the message as an email message to dynamic email addresses.
Everything works fine if I did not select the "Use Mail Package". But when I choose that option it errors out. I followed this blog posted on SDN -
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
The following XML message is my source
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/Somenamespace">
   <ns0:Message1>
      <ns1:studentlisttest xmlns:ns1="urn:karthiksender_to_karthikreceiver">
         <Student>
            <studentid>1</studentid>
            <lastname>Studentlastname</lastname>
            <firstname>Studentfirstname</firstname>
         </Student>
         <Mail>
            <From>[email protected]</From>
            <To>[email protected]</To>
            <Subject>Test mail adapter</Subject>
         </Mail>
      </ns1:studentlisttest>
   </ns0:Message1>
</ns0:Messages>
What I want to accomplish is, I have a simple message mapping where the Studentdetails are mapped to, lets say Customer details. For convenience lets keep it simple, StudentId --> Customerid, (student)Firstname --> (customer)Firstname, (Student)Lastname --> (customer)Lastname
I would like to get the Customer details as an XML attachment or in the body of an email with from, to and subject corresponding to that specified in the <Mail> node.
I followed the instructions posted on the blog and it works fine if I don't map the studentdetails to customerdetails. I did multimapping, with one source message (the xml file I posted above) and two target messages (customerdetails and Mail, which is the external definition posted on the blog). I beleive I'm missing something here. Could somebody please guide me through this?
Thanks
Karthik

hi,
I still have not found the solution for this problem. Michal, your blog works fine when my source message has got only the mail details. As per your advice, I tried modified the structure of the xsd file as follows
<xs:schema targetNamespace="http://sap.com/xi/XI/Mail/30"
xmlns:xi="http://sap.com/xi/XI/Mail/30"
xmlns:xs="http://www.w3.org/2001/XMLSchema">

<xs:element name="Mail">
    <xs:annotation>
      <xs:documentation>Mail package for XI - Mail Adapter</xs:documentation>
    </xs:annotation>
    <xs:complexType>
      <xs:sequence>
        <xs:element name="Subject" type="xs:string" minOccurs="0"/>
        <xs:element name="From" type="xs:string" minOccurs="0"/>
        <xs:element name="To" type="xs:string" minOccurs="0"/>
        <xs:element name="Reply_To" type="xs:string" minOccurs="0"/>
        <xs:element name="Content_Type" type="xs:string" minOccurs="0"/>
        <xs:element name="Date" type="xs:dateTime" minOccurs="0"/>
        <xs:element name="Message_ID" type="xs:string" minOccurs="0"/>
        <xs:element name="X_Mailer" type="xs:string" minOccurs="0"/>
        <xs:element name="Content" minOccurs="0">
          <xs:annotation>
            <xs:documentation>any type</xs:documentation>
          </xs:annotation>
        </xs:element>
      </xs:sequence>
      <xs:attribute name="encoding" type="xs:string"/>
    </xs:complexType>
</xs:element>
<xs:element name="MailReceipt">
    <xs:annotation>
      <xs:documentation>Mail Receipt for XI - Mail Adaper</xs:documentation>
    </xs:annotation>
    <xs:complexType>
      <xs:sequence>
        <xs:element name="Server" type="xs:string"/>
        <xs:element name="Format" type="xs:string"/>
        <xs:element name="UseMailPackage" type="xs:boolean"/>
        <xs:element name="Encoding" type="xs:string"/>
        <xs:element name="Subject" type="xs:string" minOccurs="0"/>
        <xs:element name="From" type="xs:dateTime" minOccurs="0"/>
        <xs:element name="To" type="xs:string" minOccurs="0"/>
        <xs:element name="Date" type="xs:dateTime" minOccurs="0"/>
      </xs:sequence>
    </xs:complexType>
</xs:element>
<xs:element name="CustomerlistExternal">
    <xs:annotation>
      <xs:documentation>Customer List</xs:documentation>
    </xs:annotation>
    <xs:complexType>
      <xs:sequence>
        <xs:element name="Customername" type="xs:string"/>
        <xs:element name="Customerid" type="xs:string"/>
      </xs:sequence>
    </xs:complexType>
</xs:element>
</xs:schema>
My source message will be something like
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
      <ns1:studentlisttest xmlns:ns1="urn:karthiksender_to_karthikreceiver">
         <Student>
            <studentid>1</studentid>
            <lastname>abclname</lastname>
            <firstname>abcfname</firstname>
         </Student>
         <Mail>
            <From>[email protected]</From>
            <To>[email protected]</To>
            <Subject>Testing Mail adapter</Subject>
         </Mail>
      </ns1:studentlisttest>
   </ns0:Message1>
</ns0:Messages>
I have mapped the <student></student> information to customerlist, with customerid --> studentid and customername --> firstname or lastname (for symplicity). This was a multimapping with one source and two target messages. My test mapping output is
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
     <ns0:Message1>
          <ns2:Mail xmlns:ns2="http://sap.com/xi/XI/Mail/30">
               <Subject>Testing Mail adapter</Subject>
               <From>[email protected]</From>
               <To>[email protected]</To>
          </ns2:Mail>
     </ns0:Message1>
     <ns0:Message2>
          <ns2:CustomerlistExternal xmlns:ns2="http://sap.com/xi/XI/Mail/30">
               <Customername>abclname</Customername>
               <Customerid>1</Customerid>
          </ns2:CustomerlistExternal>
     </ns0:Message2>
</ns0:Messages>
So how would I get this part of the <CustomerlistExternal></CustomerlistExternal> part of the message as an attachment to the mail address specified in the <ns2:Mail></ns2:Mail> tags.
I'm definitely not understanding it right and am missing something. Could you give me step by step instructions to acheive this. I apologize for the trouble..this would be of great help to me.
Thanks
Karthik

Dynamic query configuration in sender jdbc adapter

Hi,
According my undertsnading in XI.3.0 dynamic query in sender JDBC adapter is not possible.
could any one confirms the possibility of this feature in XI 7.0 .
Thanks,
venu

Hi VJ,
sorry for late responding to your answer.
One of our requirements is the query statement that we write in sender communication channel should be changed dynamically, for example in where condition the condition parameters values required to change.
Thanks,
venu

Receiver Mail Adapter Error ( Dynamic mail address to be used)

Hi EveryBody,
I am getting an error in the RWB (Communication Channel Monitoring) as Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error: invalid XIMailAdapter channel 'a089879fd0b63a4b92ca72d4a4af2ec4'.Mail is not send to the receiver.I have tried using USE MAIL PACKAGE as base64 and NONE.
Can somebody help me out in the configuration.

Hi,
have u refered the below weblog of michal:
Mail Adapter (XI) - how to implement dynamic mail address
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
Thnx
Chirag gohil.

Dynamic email address in MAIL adapter

Hi ALL,
Is there a way of sending dynamic email addresses in mail adapter?
Regards,
XIer

Xier,
Yes. You can do it. Using Mail adapter option with Use MailPackage option.
raj.

JDBC adapter - no UPDATE to database

Hi,
I have the scenario ABAP Proxy to XI to JDBC to read some data from a database and return some info back to BW. Is it mandatory to UPDATE the selected records in some way or can the UPDATE part of the adapter be disabled by putting something in the UPDATE parameter on the comm channel ?
Cheers
Colin.

Hi Colin,
if you are talking about a sender JDBC adapter: you can put <TEST> in the update statement.
See this snippet from the help:
<i>Update SQL Statement
You have the following options:
Enter a valid SQL statement that is to be applied to the database once the data (determined from the Query SQL Statement) has been successfully sent to the Integration Server/PCK.
It must be an INSERT, UPDATE, or DELETE statement.
In place of the SQL statement, you can also enter <TEST>. Once the data determined from Query SQL Statement has been successfully sent, the data in the database remains unaltered.
This is recommended if the data has not only been read, but also changed by a stored procedure entered under Query SQL Statement.</i>
http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
If you want to synchronously call a receiver JDBC adapter, i think you can use action=SELECT without an update.
Regards
Christine

Populating SAP Database table using JDBC adapter

Hi Folks,
I have a requirement to populate a SAP database table say ZTABLE using XI. The Model is the table has to be populated through a file which will be processed by SAP XI. Basically this is a File to JDBC scenario. The database used is ORACLE. Kindly provide me some idea to go ahead.

I tried to place the MS access table in the shared folder of the Application server system but still it seems the table is not being populated.
did you check the log in your receiver channel? (/people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn)
The requirement is to update the tables directly as those are the custom tables.
i would still say that do not update SAP tables directly from XI/ PI.....this is not a standard architecture/ solution....

Inserting Multiple Rows into Database Table using JDBC Adapter - Efficiency

I need to insert multiple rows into a database table using the JDBC adapter (receiver).
I understand the traditional way of repeating the statement multiple times, each having its <access> element. However, I am just wondering whether this might be performance-inefficient, as it might insert records one by one.
Is there a way to ensure that the records are inserted into the table as a block, rather than record-by-record?

Hi Bhavesh/Kanwaljit,
If we have multiple ACCESS tags then what happens is that the connection to the database is made only once. But the data is inserted row by row.
Why i am saying this?
If we add the following in JDBC Adapter..logSQLStatement = true. Then incase of multiple inserts we can see that there are multiple
<i>Insert into tablename(EMP_NAME,EMP_ID) VALUES('J','1000')
Insert into tablename(EMP_NAME,EMP_ID) VALUES('J','2000')</i>
Doesnt this mean that rows are inserted one by one?
Correct me if i am wrong.
This does not mean that the transaction is not guaranted. Either all the rows will be inserted or rolled back.
Regards,
Sumit

Sender JDBC adapter donot want to update database..

Hi,
We have JDBC to RFC scenario. In This we need to read only database table , we should not update it. As in sender JDBC adapter configuration Update SQL Statement is mandatory, so what needs to be done in this case?

Hi,
In place of the SQL statement, you can also enter <TEST>. Once the data determined from Query SQL Statement has been successfully sent, the data in the database remains unaltered.
This is recommended if the data has not only been read, but also changed by a stored procedure entered under Query SQL Statement.
http://help.sap.com/saphelp_nw04/helpdata/EN/7e/5df96381ec72468a00815dd80f8b63/frameset.htm
Regards,
Manjusha

DYnamic select statement in JDBC adapter?

Hi guys,
Is it possible so send dynamic select statement in jdbc adapter?
XIer

Aamir,
The poster did not specify whether this was sender or receiver channel, but it would only make sense that a "dynamic query" must be on the receiver communication channel since if it was on the sender channel, the channel would have to intelligently determine how to do dynamic queries.
Also, the poster asked if there was a way to "send a dynamic query" to the channel. This seems to imply that the channel is receiving information from somewhere to determine the query, which could only mean it is a receiver channel.
If you would like more information on the JDBC sender communication channel, please open a new thread.

JDBC Adapter - Dynamic database address

Similar Messages

Maybe you are looking for