JDBC in JDevelper

Hello Folks,
In JDevelper we are running across a problem with JDBC. The program will compile fine, but it will will not run.
We keep getting the error: java.lang.ClassNotFoundException: oracle.jdbc.driver.OracleDriver.
Now, here is the interesting part: I think the libraries are set up fine, because the classpath in JDevelper for the Oracle JDBC is set to:"C:\jdev9i_902\jdbc\lib\classes12.jar", which is the default.
We've tried reinstalling JDevelper (9.0.2), using the 9.0.3 version, and downloading the JDBC drivers directly from oracle all to no avail.
Any help would be appreciated!
Thanks,
Jeff

Similar Messages

Cannot connect Oracle 7.2.2 using JDBC thin in JDevelper....

When I try to connect Oracle 7.2.2 database using JDBC thin driver of Java 1.1.8 in JDeveloper, the connection manager refuse to connect the database and alert the minimum version supported is 7.2.3. But I know JDBC thin driver can connect database of 7.2.x onwards. Any way to workaround? Thank you.

Hi Tian-liang,
Try using Microsofts JDBC driver rather than Suns. Also search these forums, other have run into the same issue.
Thank you
Don

SOA WebLogic : Cannot load JDBC driver class

Hi, I'm new to this Oracle SOA World. Currently I'm trying to configure environment on my system. I found a very useful document to install all related SOA component to my system, the document name was 'Quick Start Guide for Oracle® SOA Suite 11gR1 (11.1.1.5.0)'. I did all the steps written in the document and have installed all the components successfully, component including Database, Jdevelper, WebLogic Server, RCU, SOA suite, service bus, all are installed successfully.
But when I'm trying to Configure Application Server (start -> Oracle SOA 11g-Home1), at one step 'Configure JDBC Component Schema' , here I'm getting this message
* The driver class listed below was not found in product installation
vendor: Derby
Driver: org.apache.derby.jdbc.clientdriver
A Test will not be performed on any database connections using this driver
In addition, when i just ignore this message and continue installation, after installation when i run weblogic server then it gives error and gets terminated
here is weblogic server log:
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
Listening for transport dt_socket at address: 8453
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b50)
Java HotSpot(TM) Client VM (build 19.1-b02, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xdebug -Xnoagent -Xrunjdwp:transpo
rt=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms512m -Xmx
1024m -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=AdminServer -Djava.
security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Xveri
fy:none -Xverify:none -da:org.apache.xmlbeans... -ea -da:com.bea... -da:javeli
n... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbcons
ole... -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE
~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dcom
mon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apach
e.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=
C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~2 -Djrockit.optfile=C:\Oracle\MIDDLE~
1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.
dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~2\config\FMWCON~1\servers\AdminSe
rver -Doracle.domain.config.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~2\con
fig\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\Oracle\MIDDLE~1\USER_P~1\domains\BAS
E_D~2\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Oracle\MIDDLE~1\USER_P~1\
domains\BASE_D~2\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\
Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~2\config\fmwconfig\jps-config.xml -Dorac
le.deployed.app.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~2\servers\AdminSe
rver\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirector
y=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\O
RACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.md
s.net.protocol"|"oracle.fabric.common.classloaderurl.handler"|"oracle.fabric.com
mon.uddiurl.handler"|"oracle.bpm.io.fs.protocol -Dweblogic.jdbc.remoteEnabled=f
alse -da:org.apache.xmlbeans... -Dsoa.archives.dir=C:\Oracle\Middleware\Oracle_
SOA1\soa -Dsoa.oracle.home=C:\Oracle\Middleware\Oracle_SOA1 -Dsoa.instance.home=
C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~2 -Dtangosol.coherence.clusteraddress
=227.7.7.9 -Dtangosol.coherence.clusterport=9778 -Dtangosol.coherence.log=jdk -D
javax.xml.soap.MessageFactory=oracle.j2ee.ws.saaj.soap.MessageFactoryImpl -Dwebl
ogic.transaction.blocking.commit=true -Dweblogic.transaction.blocking.rollback=t
rue -Djavax.net.ssl.trustStore=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrus
t.jks -Dem.oracle.home=C:\Oracle\Middleware\oracle_common -Djava.awt.headless=tr
ue -Dums.oracle.home=C:\Oracle\Middleware\Oracle_SOA1 -Dweblogic.management.disc
over=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dwe
blogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifes
t_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_c
lasspath weblogic.Server
Listening for transport dt_socket at address: 8453
<2012-mar-02 kl 21:14 CET> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE
Provider self-integrity check for better startup performance. To enable this ch
eck, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<2012-mar-02 kl 21:14 CET> <Info> <Security> <BEA-090906> <Changing the default
Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable th
is change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<2012-mar-02 kl 21:14 CET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLog
ic Server with Java HotSpot(TM) Client VM Version 19.1-b02 from Sun Microsystems
Inc.>
<2012-mar-02 kl 21:14 CET> <Info> <Management> <BEA-141107> <Version: WebLogic S
erver 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<2012-mar-02 kl 21:14 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state
changed to STARTING>
<2012-mar-02 kl 21:14 CET> <Info> <WorkManager> <BEA-002900> <Initializing self-
tuning thread pool>
<2012-mar-02 kl 21:14 CET> <Notice> <Log Management> <BEA-170019> <The server lo
g file C:\Oracle\Middleware\user_projects\domains\base_domain\servers\AdminServe
r\logs\AdminServer.log is opened. All server side log events will be written to
this file.>
<2012-mar-02 kl 21:14 CET> <Notice> <Security> <BEA-090082> <Security initializi
ng using security realm myrealm.>
<2012-mar-02 kl 21:14 CET> <Warning> <oracle.as.jmx.framework.MessageLocalizatio
nHelper> <J2EE JMX-46041> <The resource for bundle "oracle.jrf.i18n.MBeanMessage
Bundle" with key "oracle.jrf.JRFServiceMBean.checkIfJRFAppliedOnMutipleTargets"
cannot be found.>
<2012-mar-02 kl 21:14 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state
changed to STANDBY>
<2012-mar-02 kl 21:14 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state
changed to STARTING>
<2012-mar-02 kl 21:15 CET> <Critical> <JTA> <BEA-110482> <A logging last resourc
e failed during initialization. The server cannot boot unless all configured log
ging last resources (LLRs) initialize. Failing reason:
weblogic.common.resourcepool.ResourceSystemException: Cannot load driver class:
org.apache.derby.jdbc.ClientDriver
weblogic.common.resourcepool.ResourceSystemException: Cannot load driver class:
org.apache.derby.jdbc.ClientDriver
at weblogic.jdbc.common.internal.JDBCUtil.parseException(JDBCUtil.java:3
01)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.loadDriver(Connect
ionEnvFactory.java:75)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.<init>(ConnectionE
nvFactory.java:131)
at weblogic.jdbc.common.internal.ConnectionPool.initPooledResourceFactor
y(ConnectionPool.java:712)
at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.
java:235)
Truncated. see log file for complete stacktrace
>
<2012-mar-02 kl 21:15 CET> <Error> <Deployer> <BEA-149205> <Failed to initialize
the application 'wlsbjmsrpDataSource' due to error weblogic.application.ModuleE
xception: .
weblogic.application.ModuleException:
at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:302)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(Modu
leListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(Depl
oymentCallbackFlow.java:517)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineD
river.java:52)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(Dep
loymentCallbackFlow.java:159)
Truncated. see log file for complete stacktrace
Caused By: weblogic.common.resourcepool.ResourceSystemException: Cannot load dri
ver class: org.apache.derby.jdbc.ClientDriver
at weblogic.jdbc.common.internal.JDBCUtil.parseException(JDBCUtil.java:3
01)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.loadDriver(Connect
ionEnvFactory.java:75)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.<init>(ConnectionE
nvFactory.java:131)
at weblogic.jdbc.common.internal.ConnectionPool.initPooledResourceFactor
y(ConnectionPool.java:712)
at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.
java:235)
Truncated. see log file for complete stacktrace
>
<2012-mar-02 kl 21:16 CET> <Alert> <OSB Security> <BEA-387068> <There is no PKI
credential mapper provider configured in your security realm. Service key provid
er management will be disabled. Configure a PKI credential mapper provider if yo
u need service provider support. This is typically the case if you have Oracle S
ervice Bus proxy services with web service security enabled or outbound 2-way SS
L connections.>
<2012-mar-02 kl 21:16 CET> <Warning> <Coherence> <BEA-000000> <Oracle Coherence
3.6.0.4 (member=n/a): Local address "127.0.0.1" is a loopback address; this clus
ter node will not connect to nodes located on different machines>
<2012-mar-02 kl 21:17 CET> <Warning> <J2EE> <BEA-160140> <Unresolved optional pa
ckage references (in META-INF/MANIFEST.MF): [Extension-Name: oracle.applcore.mod
el, Specification-Version: 0.1, Implementation-Version: 11.1.1.0.0, referenced f
rom: C:\Oracle\Middleware\user_projects\domains\base_domain\servers\AdminServer\
tmp\_WL_user\usermessagingserver\a7bt7z]. Make sure the referenced optional pack
age has been deployed as a library

Hi:
try placing the jars that represent ur driver, here
For both Windows and Linux, you must perform the following steps:
Drop the vendor-specific driver JAR files to the user_projects/domains/soainfra/lib directory.
Drop the vendor-specific driver JAR files to the <Weblogic_Home>/server/lib.
Edit the classpath to include the vendor-specific jar file in <Weblogic_HOME>/common/bin/commEnv.sh
This info was copied, from here: http://docs.oracle.com/cd/E21764_01/integration.1111/e10231/adptr_db.htm#CHDBEJDC
Hope this helps
best

Where is the jdbc driver to change it in IAS folders

Hello ...
we are developing an application in Jdevelper 10.1.2. When we test the application in the jdeveloper embedded container, a specific query is not returning the correct information from the database. However, if we deploy the application in an IAS 10g instance in the A server, the specific query in the application works correctly. We deploy the same application in another server and the specific query doesn't work correctly... we belive that the reason of this error is the jdbc driver
The question is: Where is located the oracle jdbc driver in the IAS 10g folders to change the driver.... i try in the jdbc folder from the Home folder but the folders in both servers are equals the applib folder in the instance path are diferent in some jar files but no one of this files are related with jdbc driver

Hi,
I don't want to use JDeveloper.
I want to write a Java program that connects to the database using Jdbc.
The PATH and CLASSPATH are defined for Java 1.4.
Here is the current CLASSPATH:
L:\oracle\product\10.2.0\db_1\jdbc\lib\ojdbc14.jar;
L:\oracle\product\10.2.0\db_1\jlib\orai18n.jar;.
What "import java......." should I code?
Many thanks.

Cannot assign an empty string to a parameter with JDBC type VARCHAR

Hi,
I am seeing the aforementioned error in the logs. I am guessing its happening whenever I am starting an agent instance in PCo. Can somebody explain whats going on?
Regards,
Chanti.
Heres the complete detail from logs -
Log Record Details
Message: Unable to retreive path for , com.sap.sql.log.OpenSQLException: Failed to set the parameter 1 of the statement >>SELECT ID, PARENTID, FULLPATH, CREATED, CREATEDBY, MODIFIED, MODIFIEDBY, REMOTEPATH, CHECKEDOUTBY FROM XMII_PATHS WHERE FULLPATH = ? <<: Cannot assign an empty string to a parameter with JDBC type >>VARCHAR<<.
Date: 2010-03-12
Time: 11:32:37:435
Category: com.sap.xmii.system.FileManager
Location: com.sap.xmii.system.FileManager
Application: sap.com/xappsxmiiear

Sounds like a UI browsing bug (when no path is selected from a catalog tree folder browser) - I would suggest logging a support ticket so that it can be addressed.

JDBC Lookup - Import table data from a different schema in same DB

Hi XI Experts,
We are facing an issue while importing a Database table into the external definition in PI 7.1.
The details are as below:
I have configured user 'A' in PI communication channel to access the database. But the table that I want to access is present in schema "B". Due to this, I am unable to view the table that I have to import in the list available.
In other words, I am trying to access a table present in a different schema in the same database. Please note that my user has been given all the required permissions to access different schema. Even then, I am unable to access the table in different schema.
Kindly provide your valuable suggestions as to how I can import table which is present in another schema but in the same Database.
Regards,
Subbu

If you are using PI 7.1, then you can do JDBC Lookup to import JDBC meta data (table structures from DB). Configure a jdbc receiver communication channel where you specify username and password which has permission to access schema A and Schema B of database. Specify database name in the connection string. Then you might have access to import both schema.
Please refer these links
SAP PI 7.1 Mapping Enhancements Series: Graphical Support for JDBC and RFC Lookups
How to use JDBC Lookup in PI 7.1 ?

Error while creating a JDBC connection to Oracle 11g using WLS 6.1

Hi
I am trying to connect to Oracle 11g database on Weblogic 6.1 server.
First of all i would like to know if this is compatible?
The environement that i have is this
1. JDK 1.3
2. Database 11g is on remote system
3. Oracle client on my local system ( Connecting to the 11g DB through the client works fine)
4. Weblogic server 6.1
5. Currently the application is connected to Oracle 10g DB and working fine(We are attempting to move it to 11g)
Below are the steps that i followed to create the connection:
1. Made an entry for the datasource in config.xml under <WLS_DOMAIN>/config folder as below
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
MaxCapacity="4" Name="CADConnectionPool"
Properties="user=abc_proxy;password=proxy_abc;dll=ocijdbc8;protocol=thin"
RefreshMinutes="5" ShrinkPeriodMinutes="10" Targets="CAsvr"
TestConnectionsOnRelease="true" TestConnectionsOnReserve="true"
TestTableName="dual" URL="jdbc:oracle:thin:@gen11t-ora.db.lab.xyz.com:1530:GEN11T"/>
2. Restarted the server.
3. Ran the application and get the following error on the server console:
<Aug 22, 2011 12:39:42 AM CDT> <Error> <JDBC> <Cannot startup connection pool "C
ADConnectionPool" weblogic.common.ResourceException:
Could not create pool connection. The DBMS driver exception was:
java.lang.ArrayIndexOutOfBoundsException
at oracle.security.o3logon.C0.r(C0)
at oracle.security.o3logon.C0.l(C0)
at oracle.security.o3logon.C1.c(C1)
at oracle.security.o3logon.O3LoginClientHelper.getEPasswd(O3LoginClientH
elper)
at oracle.jdbc.ttc7.O3log.<init>(O3log.java:289)
at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:251)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:246)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
va:365)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:260)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Con
nectionEnvFactory.java:193)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Con
nectionEnvFactory.java:134)
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllo
cator.java:705)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.j
ava:282)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.j
ava:650)
at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Depl
oymentTarget.java:360)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Dep
loymentTarget.java:285)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeploy
ments(DeploymentTarget.java:239)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(
DeploymentTarget.java:199)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:360)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
57)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
25)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy31.updateDeployments(Unknown Source)
at weblogic.management.configuration.ServerMBean_CachingStub.updateDeplo
yments(ServerMBean_CachingStub.java:2977)
at weblogic.management.mbeans.custom.ApplicationManager.startConfigManag
er(ApplicationManager.java:372)
at weblogic.management.mbeans.custom.ApplicationManager.start(Applicatio
nManager.java:160)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:360)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
57)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
25)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy42.start(Unknown Source)
at weblogic.management.configuration.ApplicationManagerMBean_CachingStub
.start(ApplicationManagerMBean_CachingStub.java:480)
at weblogic.management.Admin.startApplicationManager(Admin.java:1234)
at weblogic.management.Admin.finish(Admin.java:644)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:524)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:207)
at weblogic.Server.main(Server.java:35)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Con
nectionEnvFactory.java:209)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Con
nectionEnvFactory.java:134)
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllo
cator.java:705)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.j
ava:282)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.j
ava:650)
at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Depl
oymentTarget.java:360)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Dep
loymentTarget.java:285)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeploy
ments(DeploymentTarget.java:239)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(
DeploymentTarget.java:199)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:360)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
57)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
25)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy31.updateDeployments(Unknown Source)
at weblogic.management.configuration.ServerMBean_CachingStub.updateDeplo
yments(ServerMBean_CachingStub.java:2977)
at weblogic.management.mbeans.custom.ApplicationManager.startConfigManag
er(ApplicationManager.java:372)
at weblogic.management.mbeans.custom.ApplicationManager.start(Applicatio
nManager.java:160)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:360)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
57)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
25)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy42.start(Unknown Source)
at weblogic.management.configuration.ApplicationManagerMBean_CachingStub
.start(ApplicationManagerMBean_CachingStub.java:480)
at weblogic.management.Admin.startApplicationManager(Admin.java:1234)
at weblogic.management.Admin.finish(Admin.java:644)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:524)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:207)
at weblogic.Server.main(Server.java:35)
Can't load scjd12.dll, file not found java.library.path=C:\jdk1.3.1_11\bin;.;C:\WINDOWS\system32;C:\WINDOWS;.\bin;C:\P
rogram Files\Lotus\Notes\Data;C:\Program Files\Lotus\Notes;C:\Program Files\Java
\jre1.5.0_17\bin;C:\Program Files\Java\j2re1.4.2_06\bin;C:\Oracle\bin;C:\Program
Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\sys
tem32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\nls;C:\WINDOWS\sys
tem32\nls\ENGLISH;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Rational
\common;C:\Program Files\Rational\ClearCase\bin;C:\apache-ant-1.6.5\bin;C:\jdk1.
3.1_11\bin;C:\Program Files\Citrix\ICAService\;C:\Program Files\Citrix\System32\
;Z:.
<Aug 22, 2011 12:38:06 AM CDT> <Info> <JDBC> <Sleeping in createResource()>
<Aug 22, 2011 12:38:07 AM CDT> <Error> <JDBC> <Cannot startup connection pool "c
ispool" weblogic.common.ResourceException:
Could not load 'com.neon.jdbc.Driver
If this is a type-4 JDBC driver, it could occur if the JDBC
driver is not in the system CLASSPATH.
If this is a type-2 JDBC driver, it may also indicate that
the Driver native layers(DBMS client lib or driver DLL)
have not been installed properly on your system
or in your PATH environment variable.
This is most likely caused by one of the following:
1. The native layer SO, SL, or DLL could not be found.
2. The file permissions on the native layer SO, SL, or DLL
have not been set properly.
3. The native layer SO, SL, or DLL exists, but is either
invalid or corrupted.
For more information, read the installation documentation
for your JDBC Driver, available from:
http://e-docs.bea.com
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Con
nectionEnvFactory.java:212)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Con
nectionEnvFactory.java:134)
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllo
cator.java:705)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.j
ava:282)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.j
ava:650)
at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Depl
oymentTarget.java:360)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Dep
loymentTarget.java:285)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeploy
ments(DeploymentTarget.java:239)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(
DeploymentTarget.java:199)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:360)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
57)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
25)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy31.updateDeployments(Unknown Source)
at weblogic.management.configuration.ServerMBean_CachingStub.updateDeplo
yments(ServerMBean_CachingStub.java:2977)
at weblogic.management.mbeans.custom.ApplicationManager.startConfigManag
er(ApplicationManager.java:372)
at weblogic.management.mbeans.custom.ApplicationManager.start(Applicatio
nManager.java:160)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:360)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
57)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
25)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy42.start(Unknown Source)
at weblogic.management.configuration.ApplicationManagerMBean_CachingStub
.start(ApplicationManagerMBean_CachingStub.java:480)
at weblogic.management.Admin.startApplicationManager(Admin.java:1234)
at weblogic.management.Admin.finish(Admin.java:644)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:524)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:207)
at weblogic.Server.main(Server.java:35)
Would like some help on this asap as the project is in critical stage.
Thanks

The driver being used by your weblogic is too old and incompatible with the DBMS. Upgrade the driver.

Error while running a test case in Jcaps 6 JDBC project

I encountered an error while running the testcase for a JDBC BC project in Jcaps 6.
BPCOR-6135:A fault was not handled in the process scope; Fault Name is {http://docs.oasis-open.org/wsbpel/2.0/process/executable}selectionFailure; Fault Data is null. Sending errors for the pending requests in the process scope before terminating the process instance
Caused by: I18N: BPCOR-3023: Selection Failure occurred in BPEL({http://enterprise.netbeans.org/bpel/DBSample/Db}Db
Kindly suggest a solution

It seems to be a very common error. Try checking your map assignments when the source (from) is empty (null). These mappings with null values may produce the error you are facing...
Good luck!

Calling Glassfish jdbc Datasorce in EJB 3.0 with @Resource annotation.

I tried EJB 3.0 with netbeans and glassfish and "{color:#ff0000}+_ORACLE_+{color}". I wanted to link the oracle database to GLASSFISH server and I followed the instructions.After I clicked 'ping' button, it displayed as *{color:#339966}'PING SUCCEED".{color}*
But I couldn't call my datasource from the eje stateless session bean with @Resource annotation.It resulted a dependency injection exception. Can some one tell me how to do this properly.
{color:#ff0000}Thanks in Advance!!!!{color}

Frank, yes, I can modify if it is necessary the datasource but, how can I say in the xxxx-jdbc.xml not to use JTA transactions when this data source is called inside a ejb 3.0 method?
I'm using Jdev11g and the integrated Web Logic Server.
Thank's

Error while executing a JDBC to Idoc scenario : No standard agreement found

Hello SAP PI Gurus,
I am having a JDBC to idoc Scenario .And the interface is running at 10 min of duration.
<SAP:AdditionalText>No standard agreement found for ,
BS_EXT_CTBSREPDB, , BS_ERPQAS_QE1_320, http://XYZ.com/FI/FI_FI_01/Charges, FIDCC2</SAP:AdditionalText>.
While i test the configuration...i get an error in reciever agreement as mentioned above.
Can you pls help me in resolving this issue.
Regards,
Ravi

Hi,
I think the problem is with namespace....for IDOC the namespace will be "urn:sap-com:document:sap:idoc:messages"...but in your case it is different.....i.e http:....etc.....please check whether you 've used the same IDOC withe above mentioned namespace in all the configuration objects like interface determination, receiveragreement etc.....
Thanks
Priyanka

Error while creating a report that uses Oracle OCI JDBC connectivity

Please let me know why my CR and LF characters are removed from my forum posting *****
Hi,
I was trying to create a report that uses Oracle OCI JDBC connectivity. I am using Eclipse3.4 download from "cr4e-all-in-one-win_2.0.2.zip". I have successfully created a JDBC OCI connection.
The connection parameters are given below:
URL: jdbc:oracle:oci8:@xe
Database: xe
username: <userName>
password: <password>
I have tested the above connection in Data source Explorer and it works fine!!!
But I am getting the following error when I drag-and-drop a table from the list of tables. Not sure what I am missing here? Any help is highly appreciated.
com.businessobjects.reports.jdbinterface.common.DBException: InvalidURLOrClassName
     at com.crystaldecisions.reports.queryengine.driverImpl.jdbc.JDBCConnection.Open(Unknown Source)
     at com.crystaldecisions.reports.queryengine.JDBConnectionWrapper.Open(SourceFile:123)
     at com.crystaldecisions.reports.queryengine.Connection.br(SourceFile:1771)
     at com.crystaldecisions.reports.queryengine.Connection.bs(SourceFile:491)
     at com.crystaldecisions.reports.queryengine.Connection.t1(SourceFile:2979)
     at com.crystaldecisions.reports.queryengine.Table.u7(SourceFile:2408)
     at com.crystaldecisions.reports.dataengine.datafoundation.AddDatabaseTableCommand.new(SourceFile:529)
     at com.crystaldecisions.reports.common.CommandManager.a(SourceFile:71)
     at com.crystaldecisions.reports.common.Document.a(SourceFile:203)
     at com.businessobjects.reports.sdk.requesthandler.f.a(SourceFile:175)
     at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.byte(SourceFile:1079)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(SourceFile:1163)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:657)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:163)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:525)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:523)
     at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
     at java.util.concurrent.FutureTask.run(Unknown Source)
     at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing$3.doWork(ExecutorWithIdleProcessing.java:182)
     at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(AbstractCancellableRunnable.java:69)
     at com.businessobjects.crystalreports.designer.core.util.thread.PriorityTask.run(PriorityTask.java:75)
     at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.runSubtask(PriorityCompoundCancellableRunnable.java:187)
     at com.businessobjects.crystalreports.designer.core.util.thread.PriorityProgressAwareRunnable.runSubtask(PriorityProgressAwareRunnable.java:90)
     at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.doWork(PriorityCompoundCancellableRunnable.java:144)
     at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(AbstractCancellableRunnable.java:69)
     at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing$IdleTask.run(ExecutorWithIdleProcessing.java:320)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Thanks
Karthik
Edited by: KARTHIK1 on Oct 14, 2009 9:38 PM

Hi Ted,
Thanks for the feedback. I was able to create a report in Creystal Reports Designer 2008 using OCI. It is not allowing only in the Eclipse plugin. In our environment we are not allowed to user Oracle thin connections and ONLY OCI is allowed.
1) Can you please let me know if there is a way to do this?
2) Will it allow data sources using native database driver?
3) If so, can I use JRC to create these reports from a desktop java program?
Thanks & Regards
Karthik
Edited by: KARTHIK1 on Oct 15, 2009 4:38 PM

Error got while creating a jdbc in Weblogic server 9.2

Hi All,
I am getting the following error
+"Warning! Connectivity to backend database not verified. This is either because required connection pool attributes "TestConnectionsOnReserve" or "TestConnectionsOnRelease" have not been enabled, or an invalid value has been specified for attribute "TestTableName". Please check the server log for more details".+
While creating a jdbc datasource in Weblogic 9.2. When I add the target and activate the setting and while testing only I am getting this error. While before adding target "Test connection" works good.
Please help me in fixing this bug.
Thank you in Advance.
With regards
John
Edited by: user7329724 on Dec 16, 2008 11:25 AM
Edited by: user7329724 on Dec 16, 2008 11:26 AM

Please confirm the "Test Connections On Reserve" attribute is enabled. You can find this property in Administration Console--->Data Sources--->Your Data Source Name--->Configuration--->Connection Pool--->Advanced

** How to use TO_DATE function in Stored Proc. for JDBC in ABAP-XSL mapping

Hi friends,
I use ABAP-XSL mapping to insert records in Oracle table. My Sender is File and receiver is JDBC. We use Oracle 10g database. All fields in table are VARCHAR2 except one field; this is having type 'DATE'.
I use Stored procedure to update the records in table. I have converted my string into date using the Oracle TO_DATE function. But, when I use this format, it throws an error in the Receiver CC. (But, the message is processed successfully in SXMB_MONI).
The input format I formed like below:
<X_EMP_START_DT hasQuot="No" isInput="1" type="DATE">
Value in Payload is like below.
<X_EMP_START_DT hasQuot="No" isInput="1" type="DATE">TO_DATE('18-11-1991','DD-MM-YYYY')</X_EMP_START_DT>
Error in CC comes as below:
Error processing request in sax parser: Error when executing statement for table/stored proc. 'SP_EMP_DETAILS' (structure 'STATEMENT'): java.lang.NumberFormatException: For input string: "TO_DATE('18"
Friends, I have tried, but unable to find the correct solution to insert.
Kindly help me to solve this issue.
Kind Regards,
Jegathees P.
(But, the same is working fine if we use direct method in ABAP-XSL ie. not thru Stored Procedure)

Hi Sinha,
Thanks for your reply.
I used the syntax
<xsl:call-template name="date:format-date">
<xsl:with-param name="date-time" select="string" />
<xsl:with-param name="pattern" select="string" />
</xsl:call-template>
in my Abap XSL. But, its not working correctly. The problem is 'href' function to import "date.xsl" in my XSLT is not able to do that. The system throws an error. Moreover, it is not able to write the command 'extension-element-prefixes' in my <xsl:stylesheet namespace>
May be I am not able to understand how to use this.
Anyway, I solved this problem by handling date conversion inside Oracle Stored Procedure. Now, its working fine.
Thank you.

Calling stored procedure multiple times in the JDBC receiver

Hi,
I am calling the stored procedure(SP) to update a DB table in the JDBC receiver.
SP has 10 input parameters, and SP can receive one value for each parameter at a time.
In my case, i will have multiple rows to insert using SP.i.e multiple values for each parameter.
Its working correctly for a single value for each parameter, but when i have multiple values i want to call the SP multiples times.
Is this possible and how?
Thanks,
Varghese.

Varghese,
I think you can have multiple statements in the JDBC Adapter's XML, as in http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm.
Here the StatementName1 node can be inserted into your JDBC XML as often as you want.
Kind regards,
Koen

Query works in Oracle Client but not JDBC

The query is as follows:
SELECT COUNT(*) THE_COUNT FROM sentorders WHERE ordersentdate BETWEEN '15-JAN-01' and '15-JAN-03';When I run this query in the Oracle client (SQL+) it tells me that THE_COUNT is 4 which is correct but when I use the following JDBC code I get THE_COUNT is 0 which is incorrect.
public ResultSet viewTotalSentOrdersByDate()
throws SQLException, Exception {
      String beginDate = "15-JAN-01";
      String endDate = "15-JAN-03";
      ResultSet rs = null;
    try {
      String queryString = ("SELECT COUNT(*) THE_COUNT FROM sentorders WHERE ordersentdate BETWEEN '" + beginDate + "' and '" + endDate + "'");
      System.out.println(queryString);
      Statement stmt = con.createStatement();
      rs = stmt.executeQuery(queryString);
      while(rs.next()) {
       System.out.println(rs.getString("THE_COUNT"))
    } catch (SQLException sqle) {
      error = "SQLException: Could not execute the query.";
      throw new SQLException(error);
    } catch (Exception e) {
      error = "An exception occured.";
      throw new Exception(error);
    return rs;
}Thanks for the help
Zac

The query is as follows:
SELECT COUNT(*) THE_COUNT FROM sentorders WHERE ordersentdate BETWEEN '15-JAN-01' and '15-JAN-03';When I run this query in the Oracle client (SQL+) it tells me that THE_COUNT is 4 which is correct but when I use the following JDBC code I get THE_COUNT is 0 which is incorrect.
public ResultSet viewTotalSentOrdersByDate()
throws SQLException, Exception {
String beginDate = "15-JAN-01";
String endDate = "15-JAN-03";
ResultSet rs = null;
try {
String queryString = ("SELECT COUNT(*) THE_COUNT FROM sentorders WHERE ordersentdate BETWEEN '" + beginDate + "' and '" + endDate + "'");
System.out.println(queryString);
Statement stmt = con.createStatement();
rs = stmt.executeQuery(queryString);
while(rs.next()) {
System.out.println(rs.getString("THE_COUNT"))
} catch (SQLException sqle) {
error = "SQLException: Could not execute the query.";
throw new SQLException(error);
} catch (Exception e) {
error = "An exception occured.";
throw new Exception(error);
return rs;
}Thanks for the help
Zac

JDBC in JDevelper

Similar Messages

Maybe you are looking for