JDBC Receiver channel is not showing any payloads

Hello Experts,
My interface is ABAP PROXY to JDBC i am facing a strange issue in ECC moni payload is succesful in PI moni also Payload is black colour flag but my Receiver JDBC channel is not showing any thing but it is in green colour (it is not showing neither succes nor error messages logs are empty).Sender chaneels are working only problem with receiver JDBC channels
In DEV and PROD it it is working in QUAL it is showing this problem.I take the restart of QUAL server still it is behaving like that
Please throw some light on the issue any help is higlhly apprecaited.
Regards
Praveen

Hi,
first check in pipe line step call technical routing , mapping execution generated JDBC receiver message pay load or not.
if it is not generated then check mapping , if is is generated then restart the channel and check what communication channel name you given in receiver agreement.
monitor the same channel, if all JDBC receiver channels have same behavior then restart the JDBC adapter service in NWA.
rEGARDS,
rAJ

Similar Messages

  • JDBC receiver channel problem

    Hi.. 
      I am doing File to JDBC scenario, for that i am using MicrosoftSqlServer.
    Driver----com.microsoft.jdbc.sqlserver.SQLServerDriver
    Connection------jdbc:microsoft:sqlserver://172.18.133.91:1433;DatabaseName=LMS
    While executing, in the JDBC receiver channel it is showing the below error.
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when attempting to get processing resources: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection to URL 'jdbc:microsoft:sqlserver://172.18.133.91:1433;DatabaseName=LMS': ClassNotFoundException: com.microsoft.jdbc.sqlserver.SQLServerDriver
    Could please tell where will be the problem.
    Thanks in advance,
    Leela

    Hi ,
    Driver shoud be :
    com.microsoft.sqlserver.jdbc.SQLSeverDriver
    Connection:
    jdbd:microsoft:sqlserver://<ip address>:port;databaseName=TNS
    try with above config..make sure that they are case sensitive.
    Regards,
    Sreenivas.

  • I have downloaded ios7 but the recent calls in phone is not showing any of the received or outgoing calls

    i have downloaded ios7 but now the recent calls (all and missed) in phone is not showing any of the received or outgoing calls.  How do I get this to show?

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • Condition editor in receiver determination does not show payload fields

    Hi !
    We are trying to create some conditions for the receiver determination in a RFC->XI->File scenario, but when we open the condition editor, under the XPATH option we do not set any payload fields to create conditions!!
    Any clues?
    Thanks,
    Matias.

    Hi,
    Check in SLD if your software component is installed on your business system and then clear SLD cache in ID.
    You will see interfaces assigned to your business system and also the payload fields in condition editor
    Thanks,
    Beena

  • Testing JDBC receiver channel

    Hi,
    I am new to XI and I am trying configure JDBC-Receiver channel for testing purpose.
    As documents says native Sql message protocal will be used for testing purpose I have selected that.Note I have given all connection parameters properly.
    In my SQL syntax parameters i have given one query
    'INSERT INTO Test  (name,age,loc) VALUES (‘Prabhakar’, ‘30’, ‘HYD’) '
    and activated the channel.
    Will it directly insert into database with the values in the specified table ?
    or do i need to do any thing else ?
    If it is wrong way,please tell me how to check my receiver channel is working fine or not without going to souruce to target scenario ?

    Hi,
    >>>>Will it directly insert into database with the values in the specified table ?
    no, it won't you need to start it with a message
    have a look at jdbc weblogs in the XI FAQ page documents section
    (link below)
    also have a look at this page:
    http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
    for jdbc document formats (messages which you can send to the jdbc adapter) to update the database
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Using TEST mode in sender file channel to trigger jdbc receiver channel

    Hi
    In order to call a jdbc receiver channel every 15 minutes I intended to use a file sender channel as a trigger where I set the Processing Mode to TEST. However, I would like to make multiple simultaneous different calls to the jdbc receiver channel, so I have multiple files in the folder, where the file sender channel is listening. Quality of Service in the file sender channel is set to Best Effort as the call is syncroneous.
    However, because the messages in the folder are not deleted, only the first message is being processed no matter whether I choose Processing Sequence "By Date" or "By Name".
    I would like to avoid having to create 15 folders containing one message each, so is there another way of doing it?
    By the way, I redirect the response from the jdbc receiver channel to a different folder, but I think this is irrelevant in this case.
    I use PI 7.11
    /Mikael

    Thanks for your answer, but I would like to avoid using Availability planning.
    Right now I am thinking about using "Advanced selection for source file" and then just specify 14 different folders here each containing one trigger message, but it seems that only the oldest message (if I choose Processing Sequence = Date) or the first message alfabetically (if I choose Processing Sequence = Name) is being processed across the many folders which I think is very weird!

  • Aging in Ar not showing any transaction but its showing all the payments

    Hi can anyone help in regard of this problem
    when i am going to run 7bucket aging report in AR it doesn't showing any transaction but it shows only receipts.
    even the transaction is due i don't know why its not showing any transaction
    we have just get upgraded to 12 release.
    Regards
    Nishant

    I am suspecting the Transaction is not stamped with Legal entity, since you mention you have recently upgraded to r12.
    Just see the comment section at the end of this page, it will give you some idea about legal entity consideration for transaction.
    http://www.oracleappshub.com/accounts-receivable/power-of-autoinvoice/
    Check the status of all transactions, are they posted to GL. This cann't be a case..as receipt you are getting.

  • JDBC Receiver channel

    Hi,
    I have a receiver channel of JDBC type. The database configured in this channel is installed on a different net from XI. Is this a problem? I have seen an error connection of this type:
    Error during database connection to the database URL 'jdbc:odbc:thin:@<IP-Address>:<Port>:DB_PROVA using the JDBC driver 'oracle.jdbc.driver.OracleDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:odbc:thin:@<IP-Address>:<Port>:DB_PROVA': SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified'
    I can't say the real <IP-Address>:<Port>:DB_PROVA string, but it's not important to solve my problem.
    Thanks!

    Hi,
    my JDBC receiver channel give me this error in Runtime Workbench:
    Error during database connection to the database URL 'jdbc:oracle:thin:@<IP_ADDRESS>:<PORT>:<SID>' using the JDBC driver 'oracle.jdbc.driver.OracleDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:oracle:thin:@<IP_ADDRESS>:<PORT>:<SID>': SQLException: Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor The Connection descriptor used by the client was: <IP_ADDRESS>:<PORT>:<SID>'
    I have replaced the real IP address, port and sid of my database in this post because they are reserved. I want to know what this message means and what can I do to solve the problem.
    Thanks!

  • Error: com.sap.engine.interfaces.messaging.api.exception.RetryControlException: Receiver Determination did not find any receivers at all

    Hello,
    I have an issue configuring a simple File Adapter Content Conversion, it will be great to give me some support as I'am new in the PO Environment.
    Iam reading a flat file and trying to write into an XML in the same FTP server
    I have a 1 to 1 Mapping as follows
    And my Content Conversion at Sender side Looks like this
    After running the configuration Iam getting following error message
    Error: com.sap.engine.interfaces.messaging.api.exception.RetryControlException: Receiver Determination did not find any receivers at all
    My System is the SAP Netweaver Process Intgration 7.4 single Java stack
    Do you have any idea how to fix this issue?
    Many thanks in advance
    Khadim

    Hi evrybody
    I have enabled the tracing of ICO and have seen that my payload for the message mapping is ok,.
    <ns:hartgeldbest_ERP_KT xmlns:ns="http://xxxxxx.de">
    <Recordset>      
    <header> 
         <gesellschaft>03</gesellschaft> 
         <filiale>000</filiale>
         <satzart>11</satzart>
         <datum>00000000</datum>
         <kennzeichen>1</kennzeichen>
    </header>
    </Recordset>
    </ns:hartgeldbest_ERP_KT>
    The issue is on detrmining the RECEIVER in the Main-XML
    <sap:Main xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:sap="http://sap.com/xi/XI/Message/30" versionMajor="3"versionMinor="1" SOAP:mustUnderstand="1">
    <sap:MessageClass>ApplicationMessage</sap:MessageClass> 
    <sap:ProcessingMode>asynchronous</sap:ProcessingMode>
    <sap:MessageId>ae41678e-da87-11e3-cd0f-0000006831a2</sap:MessageId>
    <sap:TimeSent>2014-05-13T10:16:43Z</sap:TimeSent>
    <sap:Sender> 
    <sap:Party agency="http://sap.com/xi/XI" scheme="XIParty"/> 
    <sap:Service>CC_Hartgeldbest_File2Idoc</sap:Service>
    </sap:Sender>
    <sap:Receiver> 
    <sap:Party agency="" scheme=""/> 
    <sap:Service/>
    </sap:Receiver>
    <sap:Interface namespace="http://xxxxx.de">hartgeldbest_KT_async_out</sap:Interface>
    </sap:Main>
    Is it possible that the receiver is overwritten due to the Content Conversion? Because if I set my Message Protocol to "File" the receiver determination will work.
    Any idea?
    Thx
    Khadim

  • "Error establishing socket" error on JDBC Receiver Channel.

    Dear All,
    Scenario: Soap to JDBC.
    I m getting error on JDBC Receiver Channel. messages are processed succesfully on ABAP Stack and receiver channel is on below error:
    ERROR : Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when attempting to get processing resources: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection to URL 'jdbc:microsoft:sqlserver://156.5.202.194:3312;DatabaseName=ODW': SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket.
    Note: i already tested another interface with this same IP and it was fine with different port.
    jdbc:microsoft:sqlserver://IP:PORT;DatabaseName=Name
    Regards,
    Manikandan

    and it was fine with different port
    socket exception is (always) related to port....did you check with the network team about this new Port?

  • Escape character for apostrophe ' in JDBC receiver channel

    Hi all,
    We have Proxy to JDBC scenario in our project. This interface is working fine with unicode data but when there is an apostrophe( ' ) coming in any of the field values ( ex: DOWTHERM 'J' MODEL19QAGB1G ) , the message is failing in receiver JDBC channel.
    can anyone please tell us how to handle single quote in JDBC receiver channel.
    I have read in SAP help documentation that apostrophe is a reserved character in SQL syntax and is therefore replaced by an escape character if it occurs within value strings. There is a option to JDBC receiver communication channel under "SQL SYNTAX PARAMETER"  to specify the escape character for apostrophe.
    Can any please tell us which value needs to be maintained in the channel to avoid this error.
    Regards
    Jagruthi

    Hi Prateek,
    Thanks a lot for you inputs.
    This issue is solved now. We have replaced single quote with two single quotes and then did the hasQuote mapping as described in the blog.
    /people/prateek.srivastava3/blog/2009/04/02/unicode-handling-for-ms-sql-server
    No value needs to be maintained in channel(SQL SYNTAX PARAMETER ).
    But just want to understand  the difference between replacing the ' with '' in mapping and using SQL SYNTAX PARAMETER option in communication channel.
    Both should ideally result in same  output. But it didnu2019t work when we tried with two single quotes in SQL SYNTAX PARAMETER (Escape Symbol for Apostrophe) in communication channel without doing anything in mapping.
    Regards
    Jagruthi

  • Recently upgraded to iOS7.0 on my iPhone 4s. The Phone app is not showing any 'all' or 'missed' calls under the Recents icon.

    I recently upgraded my iPhone 4S to iOS7. I noticed that when I place calls or receive calls there Phone app - under Recents does not show any calls under 'all' or 'missed' calls.

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • HT1430 my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

    my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

    There is a hardware problem.  Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.

  • My itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?

    my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
    Diagnostics test
    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    ECS G31T-M7
    iTunes 10.5.2.11
    QuickTime 7.6.9
    FairPlay 1.13.37
    Apple Application Support 2.1.6
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 4.0.0.97
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 0012ABAC07F3CCB0
    Current user is an administrator.
    The current local date and time is 2011-12-31 14:06:21.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is not supported. (16005)
    Video Display Information
    Intel(R) G33/G31 Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:        {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
    Description:            Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
    IP Address:             192.168.1.5
    Subnet Mask:          255.255.255.0
    Default Gateway:    192.168.1.1
    DHCP Enabled:      Yes
    DHCP Server:         192.168.1.1
    Lease Obtained:     Sat Dec 31 13:46:09 2011
    Lease Expires:       Tue Jan 03 13:46:09 2012
    DNS Servers:         192.168.1.1
    Active Connection: LAN Connection
    Connected:             Yes
    Online:                    Yes
    Using Modem:        No
    Using LAN:             Yes
    Using Proxy:           No
    SSL 3.0 Support:     Enabled
    TLS 1.0 Support:     Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was unsuccessful.
    The network connection timed out.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2011-12-31 14:00:02.
    **** Device Connectivity Tests ****
    iPodService 10.5.2.11 is currently running.
    iTunesHelper 10.5.2.11 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Connected Device Information:
    rawkiss’s iPhone, iPhone 3G running firmware version 4.0
    Serial Number:       86931UEAY7H
    **** Device Sync Tests ****
    Sync tests completed successfully.

    I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
    Here is a link that will take you directly to the Tech Note:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
    When using this fix the Tech Note indicates:
    "Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
    however it did retain the captions (at least it did for me).

  • HT1338 I am still with 10.5.8 and my macbook does not show any software updates, i am willing to pay for a new software if it is needed, because i can't connect mi iPhone 5S or iPad mini to iTunes. PLEASE HELP!!!!!

    How do i update 10.5.8 if my macbook does not show any software updates?

    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading from Snow Leopard to Lion or Mountain Lion to Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mavericks- System Requirements
           Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

Maybe you are looking for