JDBC Receiver - Multiple rows Update

I have an interface the incoming message contain multiple columns and it has to be updated using a JDBC Receiver Adapter with its key values.
Can we send multiple rows in a single JDBC Update Statement.
Please advise.

Sebin,
No ,it's not possible to have multiple rows in single update statement. Rather you can duplicate the segment at Statement level and do the update.
Please refer http://help.sap.com/saphelp_nw70/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
raj.

Similar Messages

Multiple Rows Update / Refresh Toplink Query when database trigger involved

Hi everybody!
I have two easy troubles for you; the platform is the same as the SRDemo Toplink version.
1. Multiple Rows Update: I want to update with mergeEntity method, multiple rows for an isolated table; that method receives a parameter that I try to bind with the iterator "dataProvider" but it only merges the first row, not all, any other combination returns an error.
What I want to do is to have a form (like tabular forms in Apex) that lets me update multiple rows in a single page. ¿May anyone tell me how to do it?
2. Refresh Toplink Named Query: I have a list on a page with two columns. From another page, a button does an action that fires a database trigger that updates one of the columns on the list´s page. When I go back to the list, it is not updated; however, the CacheResults´s property is set to false on the iterator.
Thanks in advance,
Alejandro T

I didn't use it (yet), but - you might take a look. You'll find a [url http://www.oracle.com/technetwork/developer-tools/apex/application-express/apex-plug-ins-182042.html]Timer plug-in on this page. It is a dynamic action which allows you to periodically fire other dynamic actions in the browser. For example use the timer to refresh a region every five minutes. You can perform any dynamic action you want using this infrastructure.So I was thinking: you might use it to run a dynamic action which would check whether something changed in that table (I suppose you'll know the way) (for example, a database trigger might set a flag in some table, timestamp or similar), and - if you find that something really changed - refresh the page.
As I said, I never used it so that's pure theory. Someone else might know better, though.

Multiple row update of a table from another one

Im trying to make a multiple row update with date from a different table, but it's giving me an error.
update inv.mtl_system_items_b
set attribute1 = t2.description,
    last_update_date = SYSDATE,
    last_updated_by = 3606
from inv.mtl_system_items_b t2
     inner join TMP.TMP_INACTIVAR_PRODUCTOS t1
     on t2.segment2 = t1.inventory_item_id;Edited by: user8986013 on 21-may-2010 14:15

Hi,
Whenever you have a question involving an error message, post the complete error message, including line number. Don't you think that might help people solve your problem?
Whneve you have any question, post a little sample data (CREATE TABLE and INSERT statements) and the results you want from that data. (In the case of a DM<L statement, like UPDATE, the INSERT statements show the tables before the change, and the results are the contents of the changed table after it.)
Review the syntax of the UPDATE statement in the SQL Language manual:
http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/statements_10008.htm#sthref9598
MERGE may be more efficient and easier to use than UPDATE.

Multiple row update; CEV business rule parameters are not refreshed

During a multiple row update, a business rule is fired for each row.
This change event business rule must update the value of another column in the same table (and same row).
Unfortunately, the parameters of the BR are keeping the values of the first row that has been checked. Since my parameter p_id always keeps the same value, I always update the same row.
Does somebody have a hint on how to solve this problem ?
I'm using Headstart R6i and Forms6i with Oracle9i DB.
Thanks in advance for your help,
Denis.

I think that's how it works. I tried that with a variable where type is Members.
It is not showing me a prompt when i select multiple rows. However works only for first row. (even if the menu is initiated from second row).
Multiple rows selected, variable type is members. works only for first row in selection. (in 11.1.2.2) You can try log an SR and see what Oracle has to say.
Regards
Celvin
http://www.orahyplabs.com

Multiple Rows Update

Hi,
I am creating a form which will display the multiple rows from the table. Is there any way to make multiple rows update at the same time.
If it is report generated by the query, can we do multiple rows update.
Regards,
Munish

Munish,
Sounds like what youâre looking for is a tabular form. Click on create page, then choose form, then tabular form and follow the steps of the wizard. This will create a tabular form for you that lets you update multiple rows, add new rows and delete multiple rows.
Regards,
Marc

Multiple Row Update in a Table

Hi,
How do I do a multiple row update in a single table in Oracle? I was thinking of something that is similar to the insert example below:
Insert into SOME_TABLE (COL1, COL2) (select COL1, COL2 from ANOTHER_TABLE);
...wherein I don't have to write multiple lines of update statement.
Thanks.

Hi Mike,
Thanks for replying. I was actually looking for a multiple row update using a single update statement. The only reason I provided an Insert statement example is to show the idea. I did some test and I was able to figure it out. I thought it was something complicated but I just had to retrieve the new values from another table and equate the primary key and foreign keys of the two tables.

JDBC Receiver adapter ( INSERT/UPDATE with SELECT)

Is it possible to have following kind of SQL Statement comming out JDBC Receiver Adatpter. If yes what would be the corresponding XML Document format for this.
UPDATE suppliers
SET supplier_name = ( SELECT customers.name
FROM customers
WHERE customers.customer_id = suppliers.supplier_id)
This condition also needs to be applied for Insert condition. Any pointer would be useful.
Thanks,
Samir

Hi
Refer this links,
http://help.sap.com/saphelp_nw04/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/b0/676b3c255b1475e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/4d/8c103e05df2e4b95cbcc68fed61705/frameset.htm
Regards,
Suryanaryana

ADF JSF - Multiple Rows Update

Does anybody if there is a new component in ADF JSF that allows update of multiple rows? Se example...
ID     | Name | Number
1     | textbox | textbox
2     | textbox | textbox
3     | textbox | textbox
|Create- button| | Save - button|

Sure, the ADF Faces <af:table> supports updating multiple rows: just put an <af:inputText> inside one of the columns.

URGENT!!! Can't implement a Multiple Row Update Process

Hi All,
I'm a total newbie to APEX and wondered if anyone could help.
I've created an Application using the "Report and Form" template. My Table, call it tab1, has a pk called pk1 and four fields, f1, f2, f3 and f4. The Application has 3 pages, p1 is the login page, p2 is the Report and p3 the Form. The Report is fine and I've added a search on the Report based on the pk. The Below is an example of the output of a Report filtered on the value pk=3:
PK F1 F2 F3 F4
3 21 A C A
3 21 B B C
3 21 C A A
3 21 B D A
Each of the 4 rows above then links into a Form on P3 for updating, so if I clicked on the link for the first row the Form would like something like this:
PK 3
F1 21
F2 A
F3 C
F4 A
Now here's what I'm trying to achieve. I've created an "Update" button on p3 and when I press this I would simple like the below statement to be executed:
Update Tab1
set F4 = :P_4,
F3 = :P_3
where F1 = :P_F1
where :P_1, :P_3 and :P_4 are the values inserted by the user. So basically I want to do a multi-row update based on a non-primary key. In this case I would want 4 rows updated after pressing the Update button.
Any help would be most appreciated.
Mits

have you tried to download and install hp's drivers from this place?
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3382185&lc=en&cc=us& dlc=

Multiple Row Update From Similar Table

I am attempting to update a table based on similar table if the Entry_Type is D and they have the same log_numbers. I have created queries to show me the results I want but am having some difficulities getting the update to happen. I am getting a single-row subquery returns more than one row error, but I would like to update all necessary rows.
Here is my sql...
UPDATE V.MASTER
SET (MODIFIED_BY, ENTRY_TYPE) = (
     SELECT MODIFIED_BY, ENTRY_TYPE
     FROM J.BACK)
     WHERE LOG_NUMBER IN
     (SELECT LOG_NUMBER FROM V.MASTER
     WHERE ENTRY_TYPE <> 'D' AND LOG_NUMBER = ANY
               (SELECT LOG_NUMBER FROM J.BACK
               WHERE ENTRY_TYPE = 'D'))
I would appreciate any assistance! Thanks!

You can also use correlated update. This one is from AskTom (http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1197999096334)
if you have the proper primary keys to assure uniqueness on S and C, this does it (i have the keys
noted in the creates)
ops$tkyte@ORA920> create table pgp_person
2 ( date_of_birth date,
3 update_by varchar2(10),
4 update_date date,
5 load_timestamp date,
6 person_num int );
Table created.
ops$tkyte@ORA920>
ops$tkyte@ORA920> create table ship_passenger
2 ( date_of_birth date,
3 person_num int,
4 voy_num int,
5 book_num int,
6 seq_num int,
7 primary key (person_num) );
Table created.
ops$tkyte@ORA920>
ops$tkyte@ORA920> create table pgp_cruise_history
2 ( voy_num int,
3 book_num int,
4 seq_num int,
5 matched_ind int,
6 primary key(voy_num,book_num,seq_num) );
Table created.
ops$tkyte@ORA920>
ops$tkyte@ORA920> update ( select p.date_of_birth dob1, s.date_of_birth dob2,
2 p.update_by, p.update_date, p.load_timestamp
3 from pgp_person p, pgp_cruise_history c, ship_passenger s
4 where p.person_num = s.person_num
5 and s.voy_num = c.voy_num
6 and s.book_num = c.book_num
7 and s.seq_num = c.seq_num
8 and c.matched_ind is not null
9 and s.date_of_birth <> p.date_of_birth )
10 set dob1 = dob2,
11 update_by = 'sdm18649',
12 update_date = trunc(sysdate),
13 load_timestamp = sysdate;
0 rows updated.

JDBC Adapter - Multiple Table Update - Sequence Number

I have to design a integration scenario where I will be updating 4 tables in a oracle database. One of these tables is a header table and the rest are detail tables. I have to generate a sequence number using Oracle Sequence number object which is one of the columns in the header table.
How can i use the Oracle SEquence number object to get the next value with JDBC Adapter?

Use an Enhancement Spot

Multi-Mapping - JDBC receiver - Multiple stored procedure - How to sequence?

Hi Folks,
We have 7.1 .Done multi-mapping , single source mapped to 5 different stored procedures.
The challenge we are facing here is , these stored procedure is not working sequentially .
i.,e for e.g., 2nd Stored Procedure should start only when first Stores procedure completely finished its turn.
But third procedure getting completed before1 st stored procedure completes .
Highly appreciate if any views on this ? How to sequence and make sure second will start only when first SP complete ?
-- Shiva

Hi ,
Thanks for your reply. all stored procedures are asynchronous one.
If we go for ccBPM , do we need to put wait step ?
- Here we dont know how much time each procedure takes to complete. Requirement is another procedure has to start only when the previous one completes.
--Shiva

BPM Question: JDBC Sender to RFC to JDBC Receiver

I have the following requirement:
JDBC Sender Adapter (by nature Asynchronous) SELECT multiple rows from a table
To
RFC Receiver Adapter (Synchronous)
To
JDBC Receiver Adapter (Synchronous) UPDATE multiple rows in a table
Then
IF <SAP:Error> XML is returned from the JDBC Receiver Adapter, I want to either issue a CCMS alert, or utilize the XI Email Adapter for error notification.
ELSE, if <root_response> XML is returned from the JDBC Receiver Adapter, do nothing.
This obviously requires a BPM. If I use the JDBC Receiver Adapter Asynchronously (with no error handling) this is a piece of cake. But after trying to use it synchronously along with error handling logic, I am stuck.
This issue that I am facing is how to logically handle the JDBC Receiver Adapter Response XML in the BPM. I would like to know what I need to do in the BPM in order to issue a CCMS alert (and/or send a message through the XI Email Adapter) ONLY if the <SAP:Error> XML is returned.
Below are examples of the 2 types of response messages that I would receive back from the JDBC Receiver:
Error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'SAP_OrderImport' (structure 'StatementName2'): java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Violation of PRIMARY KEY constraint 'PK_SAP_OrderImport'. Cannot insert duplicate key in object 'SAP_OrderImport'.</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Success:
<?xml version="1.0" encoding="utf-8" ?>
<root_response>
<StatementName1_response>
<update_count>1</update_count>
</StatementName1_response>
</root_response>
I have searched SDN for a while but did not find anything that specifically addressed this. I would appreciate any help

Hi,
In ur BPM wrap the jdbc send step with a exception block. in the exception block define a control step to throw an alert.
so when the jdbc step fails, the exception is caught and an alert is generated by the control step.
cheers,
naveen

Query for Multiple Rows as XML

Ok I've seen this topic in the forums, but have failed to get this to work within my process. Basically I have a process that has a user fill out a form, and upon submittal the form writes it's information to a database (via a data connection within the form that invokes a separate process upon submittal.), once this is done the main process is invoked and it's first step is to query that same database and bring back the data in a lower (now exposed) portion of the form that contains certain fields that track the issue history. The query brings back the xml document and I store it in an xml variable (xml_output). I then take this information and use the Set Value object to assign the returned nodes values to the location fields in the form. This works if the query returns only one row. But once the form is moved beyond the initial Task Assignment, (first user), and query returns more than just one row, the added nodes to not show up on the form, i.e I still just get information about the first row in my form. From what I've read the form should be able to recognize the xpath expression, and bring back all the nodes, by in a sense using instance manager to create an instance for each node on the form. My question is how can I get this to work. Jasmin if your still out there... Help!
Also We're using Adobe LiveCycle ES 8.0
created the process using Workbench
the form was reader enabled and saved as a dynamic PDF.
Thanks
Mike

Ok have done the binding of the schema to the form, and I'm getting the information to flow as it's supposed to. The problem I'm having now, (I know I'm having a bunch.) is that once I've placed the form into my process, and I use the set value operation to pre-fill information I get the form to flow, but the rest of the information that was previously filled in is blank. So I have checked the variable and nothing wrong there. It appears the problem is how I'm using the set value operation. If I don't use the set value operation, the form retains it's information. And if I use the set value by trying to set the subform value, the form retains it's information, but no pre-fill. I'm going to try to be a little more detailed here. The xml that is returned looks like this:
        0016-03-30
        Mike
        Public Works
        alone in the dark
        Type sleep
        -1
        Council
        FYI
        Important
Flowed and positioned are actual subforms on the form that have their properties set as their names indicates. The entire path is /form1/Page1/flowed/positioned . The way I was able to get the form to flow correctly upon the injection of this xml data, was to bind the subforms in the form in this manner, positioned[*]. Designer didn't place the [*] for me so I had to do this myself. But once I previewed the document, the form pre-populated and created the necessary number of subforms and placed information into the fields correctly.
Now on the process side, I have created an xfaform variable that stores the form (bound to xsd.) information, and another xml variable that stores the query return that looks like the xml listed above (has an xsd associated with it for navigating xpath). My first operation performs the query (JDBC- Query Multiple Rows as XML) and stores it into the xml variable. The next step of the process is the Set Value operation which is supposed to inject the xml data retrieved from the query into the form. Initially I tried the an xpath similar to the following:
/process_data/object/data/form1/page1/flowed/positioned = /xml_data/flowed/positioned.
No dice. On this one the form retains the information filled out by the user (didn't explain this earlier, the form is filled out first, and upon submittal the process starts.), but doesn't pre-populate the bottom part of the form. Next I tried the following xpath:
/process_data/object/data/form1/page1/flowed = /xml_data/flowed/positioned.
This time it retained the form information which was filed in by the user, but the bottom part is becomes hidden! Didn't understand this. But I started to kinda think that I had to navigate he xpath in order to correctly inject the xml into the form. That being said my next attempt was:
/process_data/object/data/form1/page1 = /xml_data
My thinking was that if on location, I stop at page1, the xml in the variable will allow it to navigate correctly through the form. Well it worked, but too well. The top part of the form is blank, but the bottom portion is pre-populated correctly. Now I'm stuck. Not sure how to get the rest of the information in the form. I thought about creating variables form each of the fields and then re-populating them after the injection of xml, but that didn't seem practical. I'm almost positive it's something I'm not doing correctly with xpath. Anyway, thanks for all your help on this.
Mike

How to pass out multiple rows from EJB method?

I need a sample for passing multiple rows from a EJB query method
(using SQLJ). All I found in existing sample code is query on a
single row and pass out as a bean class e.g Emp class with some
getXX() method.
What I'm currently doing is to convert the Iterator to a Vector
and pass the Vector out, which means I've to code a bean class,
use a Vector and later use a Enumeration to read the result. Is
there a simpler way to receive multiple rows from EJB?
In EJB:
while ( empIter.next() ) {
EmpVect.addElement( new Emp( emps.empNo(), emps.eName(),
emps.job(), emps.deptNo()) );
return EmpVect;
In client:
Vector empVect = empEJB.getEmployees(123);
Enumeration employees = empVect.elements();
while ( employees.hasMoreElements() ) {
emp = ( Emp ) employees.nextElement();
System.out.println(" " + emp.getEName());

Hi Ankit,
There is a workarround that requires some excel work.
Here you need to follow the above mentioned steps along with this you need an additional combo box (wont be displayed at runtime, it will fetch the entire data if we select blank for the first combo box).
Now suppose we are using 2 combobox C1 and C2 and our data is from B3 to F6.
Now for C1 (one we are using for selection)
1. select the labels as Sheet1!$B$2:$B$6 (a blank cell is added for all selection)
2. Insertion type as filtered Rows
3. Take source data as Sheet1!$B$2:$F$6 (includeing one blank row)
4. selected Items as none
5. for C2 labels as Sheet1!$A$3:$A$6 source data as Sheet1!$B$3:$F$6 destination as Sheet1!$B$14:$F$17.
6. Selected Item : Sheet1!$B$9 (blank Type dynamic). So it will select the entire table, if nothing is selected.
7. take a Grid component and map it to Sheet1!$H$9:$L$12. use formula as =IF(IF($B$9="",B14,B9)=0,"",IF($B$9="",B14,B9)) on cell H9. Where we take H6 to L12 as final data set. Tis will become the data for next set fo Combo box for further selection.
8. follow the same steps for other combobox selections.
9. control the dynamic visibility of grids on the basis of Destination cell (like B9).
Revert if you need further clarification.
Regards,
Debjit

JDBC Receiver - Multiple rows Update

Similar Messages

Maybe you are looking for