Jdev11.1.1.3 - SelectManyChoise loosing last chosen value when hit ENTER

Hi,
I have a QBE on a table and for one column I used a selectManyChoice component. When user selects a set of values from the selectManyChoice and hits "enter" IMMEDIATELY , the last chosen value in the list of values chosen is lost and filter is being applied on the remaining values. The same usecase is working fine, if user selects a set of values from the selectManyChoice and highlights either the filter input area or some other area on the UI - technically when he tabs out of the lov.
I do have autoSubmit property set to true. Debugged using valueChangeListener, even that is getting fired only when I tab out or hit enter. I am only concerned abt the case where in user hits enter immediately without tabbing out of selectManyChoice. In this case, even the valueChangeEvent shows me that the last chosen value is already lost. Also I observed that valueChangeListener is getting fired only after tabbing out or hitting enter. Is it not possible to listen to every event of selection/deselection in selectManyChoice ?
Any pointers plz ?

First of all "I installed 11.1.2.3 in windows 7 ultimate OS", it is not a supported OS so if you want assistance problem solving you should stick with a supported OS.
It also looks like you have installed a whole range of products some requiring additional configuration and the requirement of SOA.
I recommend starting with a support OS and only install products that are required.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

I don't see the last addm findings when I enter in Enterprise Manager

Hello:
I don't see the last addm findings when I enter in Enterprise Manager. The Snapshots are being taken periodically but when I enter the Home of Enterprise Manager I don't see the findings of ADDM. I can run manually ADDM but in fact the ADDM is run every hour. Any idea?
I use Oracle 10r2 Enterprise edition
Thanks
Jordi Martin

hi,
looks like that you cannot upload the xml files from your agent
you can try to perform a clean restart of your agent :
1) emctl stop agent
2)Remove the following files:
$AGENT_HOME/sysman/emd/state/*
$AGENT_HOME/sysman/emd/collection/*
$AGENT_HOME/sysman/emd/upload/*
$AGENT_HOME/sysman/emd/lastupld.xml
$AGENT_HOME/sysman/emd/agntstmp.txt
$AGENT_HOME/sysman/emd/blackouts.xml
$AGENT_HOME/sysman/emd/protocol.ini
3) emctl start agent
4) emctl clearstate agent
5) emctl secure agent your_pwd
6) emctl upload agent
7)emctl status agent ->to check agent status
br,
mrak

Loosing of object state when it is called from server to client side

Hi,
Iam loosing an object values when that object is returning from server side to client side.
Even my server class implements serilizable interface, the object is not retaing its values..
can any one suggest regarding this Issue..
Regards,
Dev

got the solution

Why am is my 4s loosing so much storage when I sync to itunes about 1GB in the last month

Why am is my 4s loosing so much storage when I sync to itunes about 1GB in the last month

*Update*
I thought I had found the offending 'app' namely "Songpop."
I regularly use "Songpop" on my phone late at night via my wifi connection.
All enteries on my phonebill are at midnight (even though I have a data allowance it was excluded from allowance). I switched 3G off on Friday, played "Songpop" at midnight and at the exact time I got a "Server Error" message.
I posted a message on the "Songpop" support forum.At first they said this was a problem relating to my ISP.
I have spoken to my ISP and asked if there are connection drops at the time I have been billed (ie to establish if my wifi dropped and 3G kicked in without my knowledge) and have been advised that there aren't any connection drops at that time.
"Songpop" have now responded that "This is an issue to take up with Apple Support" see: http://support.songpop.fm/songpop/topics/playing_songpop_on_phone_via_wifi_but_i ncurring_download_data_charges_for_3g_useage?utm_content=topic_link&utm_medium=e mail&utm_source=reply_notification
Hopefully someone at Apple can respond ....

HT4623 I installed iOS 7 last night and when I started the i-pad this morning, it ask for a password. I did not set a password and now my i-Pad is disabled and I can't use it, can you help?

I up loaded iOS7 last night and when I opened my iPad this morning, I was ask for a password. The problem is, I did not set a password and when I used the 4 digits I would normally use, the i-Pad disabled and I cannot get it open. Can anyone help?

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

IMessage beta loose all saved conversations when I open and close a window.

iMessage beta looses all saved conversations when I open and close a window.
Just reporting this bug... Could not find anyother place to do it.
Jonathan

I thought it was doing that also. But I found that if I start a new chat with someone I was messaging before, then the old messages re-appear in the messages window.

Why does everyone at my work loose their internet connection when I update Adobe Cloud Products?

Why does everyone at my work loose their internet connection when I update Adobe Cloud Products? We are on a 20mb broadband connection and there is around 20 people using computers at my work but when I start my Adobe Cloud Product update or when I try and download my Adobe Cloud Product everyone at my work looses their internet connection and so do I. But the update keeps downloading and installing.

I am sorry FooWingLi but the difficulties you are describing sounds more like a local network configuration issue. I would recommend working with your I.T. department to investigate this matter.

I attempted to update my firefox last night, and when i did it casued me to have to reinstall adobe flahplayer and adblock. When i attempted to re-download these apps i couldn't. Now I don't have adblock and I can't watch videos because flashplayer won't

i attempted to update my firefox last night, and when i did it casued me to have to reinstall adobe flahplayer and adblock. When i attempted to re-download these apps i couldn't. Now I don't have adblock and I can't watch videos because flashplayer won't download. If this can't be corrected I may have to return to Internet Explorer. Can this be put right? in English
== This happened ==
Every time Firefox opened
== 7/20/2010

Your above posted list of installed plugins doesn't show the Flash plugin for Firefox.<br />
See [[Managing the Flash plugin]] and [[Installing the Flash plugin]]
You can check the Adobe welcome and test page: http://www.adobe.com/software/flash/about/
You can use this manual download link:
*http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller

How to fetch last transactioned values for given period

Hi,
I'm working on a report, here I'm fetching data from j_2irg1bal table for some period. it has data to internal table like
e.g. : given period 01-04.2009 to 30.04.2009
date        mantr opening balance closing balance
04.04.2009 1007     100             130
08.04.2009 1007     130              80
here for given date two record are available,
i need to capture last updated value i.e. for date 08.04.2009.
Kindly suggest your ideas to move with this

Hi,
Assume that your values are in internal table ITAB. Then,
Sort ITAB by date DESCENDING.
Doing so, your records gets sorted in Descending Order with respect to Date. And the Last updated record comes in the first position.
And now,
Read table ITAB index 1.
The above code, fetches the last record into the Work-Area.
That's it.
Rgds,
Ramani N

How to get the last "reported" value in a cross tab

Dear all,
based on a BeX Query Universe I have built a report with a cross tab in webI.
Maybe you can help me with the following issue. There I have a problem: I want to get in the Total-column always the last reported value, e.g. for Number Total Customers "66", not for Mar or Apr, because they are null.
Calendar Month                      |Jan| |Feb| |Mar| |Apr| |Total|
Number Total Customers         |54|    |66| | |      | |       66
Number Active Customers      |57|    |71| | |      | |       71
I hope that you understand my problem and could help as soon as possible.
Thanks a lot in advance for your support.
Best regards.
Edited by: HOLWUE on Feb 8, 2010 1:40 PM

Hi,
If this question is related to Webi then post in the below forum.
http://scn.sap.com/community/businessobjects-web-intelligence/content?filterID=content~objecttype~objecttype[thread]
Regards,
Sujit.

From within Photoshop Elements, when I try to open Editor, a box opens that states I must activate the software. I registered and activated the software last year. When I click to activate, I get a message that I am not connected to the internet. I am

From within Photoshop Elements, when I try to open Editor, a box opens that states I must activate the software. I registered and activated the software last year. When I click to activate, I get a message that I am not connected to the internet. I am connected. How do I get Editor to work?

You would get the redemption code, or perhaps even the serial number, from whomever you purchased the software from, apparently Amazon, so talk to them. This wouldn’t be the first time they’ve sold something that didn’t have all the numbers needed to license it.
A redemption code is something that is usually on the inner disc packaging if you purchase the media in a box, and there is a barcode on the outside of the packaging that must be scanned at the checkout register to activate the hidden inner code so you can redeem it at home on that website. This is what happens if you buy PSE from a brick-and-mortar store like Best Buy. I don’t’ know what happens if you purchase the downloaded version as I have never done that.
A redemption code is 24-digits of letters and numbers that you enter into a website to get a serial number, once and only once. The serial number of only 24-digits, no letters, is what you enter into the software during the install or when you run it and it asks if you want to register or run in a trial mode—whatever the exact phrasing is.
In any case it sounds like you don’t have either a redemption code or serial number—although perhaps something is listed on the purchase confirmation or your account online at Amazon or even in an e-mail from Amazon.

HT1977 I purchased a game on my ipod touch. I restored the device to factory settings last night and when I synced all the apps back, the game is now in the demo version. How do I unlock it ? I hope I don't need to pay for the full version again.

I purchased a game on my ipod touch. I restored the device to factory settings last night and when I synced all the apps back, the game is now in the demo version. How do I unlock it ? I hope I don't need to pay for the full version again.

PES 2012 is no longer available in the US App Store and only on the British App Store currently.
http://pes-2012.en.softonic.com/iphone
That (an app no longer available) happens sometimes.
Your only way is if you have the appt on your computer such as in the recycle bin/trash or in a computer file backup. In that case move it to your iTunes library and sync.

HT2178 I do not have sound on my computer. It was fine last night but when my husband turned it on this morning, there was now sound. Also My iPhoto shuts down when I try to run a slide show. I have just had my computer for 2 1/2 weeks.

I had sound on my computer last night but when turning on this morning there was no sound. It is not muted. Any suggestions. Also, when I try to run an event in IPhoto as a slide show, it shuts down.

Just to clarify, does iPhoto unexpectedly quit or does your computer shut down? For the sound problem, try here:
http://support.apple.com/kb/PH3837

Using an index to access the last n values of a certain combination

I have a large table of the following form:
Name Typ
ID NUMBER
M_DATE DATE
M_LOC NUMBER
M_ARTICLE VARCHAR2(30)
M_TYPE VARCHAR2(30)
M_MEASURE VARCHAR2(50)
VALUE NUMBER
In this table there is only a small number of different locations, articles, types and maesures but a large number of m_date values.
I want to access the last 10 values for a certain combination of locations, articles, types and measures.
I have an index
create index i_res_2 on results (m_loc, m_article, m_type, m_measure, m_date);
In my opinion it should be possible to access the last 10 values directly by this index, but
when I do my select in the following way it seems to me that first all datasets with the same
locations, articles, types and maesures are selected, then sorted by date and then the last 10
dates are selected. As those datasets are spread over the whole table it needs a higher number
of physical reads. Is there a way to have an index on m_date and an other form of this query
that selects the requested values with less phyical reads? (Database version is 10.2)
SQL> select
2 id,
3 m_date,
4 value
5 from (
6 select
7 id,
8 m_date,
9 value,
10 rank() over (order by m_date desc) r
11 from results
12 where m_loc = '14001'
13 and m_article = '11211-00-00'
14 and m_type = '0002'
15 and m_measure = '032')
16 where r <= 10
17 order by m_date asc;
ID M_DATE Value
3931958 05.03.10 69.00
3931960 05.03.10 69.00
3905712 10.03.10 68.60
3999535 10.03.10 69.70
3985125 11.03.10 69.40
3957851 11.03.10 69.60
3949799 21.03.10 68.70
4017369 21.03.10 69.00
3951981 22.03.10 68.80
3983554 22.03.10 68.80
Abgelaufen: 00:00:03.00
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 48 | 6 (34)| 00:00:01 |
| 1 | SORT ORDER BY | | 1 | 48 | 6 (34)| 00:00:01 |
|* 2 | VIEW | | 1 | 48 | 5 (20)| 00:00:01 |
|* 3 | WINDOW SORT PUSHED RANK | | 1 | 39 | 5 (20)| 00:00:01 |
| 4 | TABLE ACCESS BY INDEX ROWID| RESULTS | 1 | 39 | 4 (0)| 00:00:01 |
|* 5 | INDEX RANGE SCAN | I_RES_2 | 1 | | 3 (0)| 00:00:01 |
Predicate Information (identified by operation id):
2 - filter("R"<=10)
3 - filter(RANK() OVER ( ORDER BY INTERNAL_FUNCTION("M_DATE") DESC )<=10)
5 - access("M_LOC"=14001 AND "M_ARTICLE"='11211-00-00' AND "M_TYPE"='0002' AND
"M_MEASURE"='032')
Statistiken
1 recursive calls
0 db block gets
547 consistent gets
474 physical reads
0 redo size
766 bytes sent via SQL*Net to client
380 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
2 sorts (memory)
0 sorts (disk)
10 rows processed

I found a solution, which is much better in terms of physical reads and consistent gets even if the optimizer calculates higher costs. But I still think, that there should be an easier way to do this:
SQL> select
2 id, m_date, value from results
3 where
4 (m_loc, m_article, m_type, m_measure, m_date)
5 in
6 (select m_loc, m_article, m_type, m_measure, m_date
7 from (
8 select /*+ first_rows(10) */ m_loc, m_article, m_type, m_measure, m_date
9 from results
10 where m_loc = '14001'
11 and m_article = '11370-00-00'
12 and m_type = '0002'
13 and m_measure = '032'
14 order by m_loc,m_article,m_type,m_measure,m_date desc
15 ) where rownum < 10);
ID M_DATE VALUE
2495995 01.02.09 70,4
2457657 19.01.09 66,9
2556262 13.02.09 67,4
2496232 01.02.09 67,6
2465051 20.01.09 67
2454994 19.01.09 67,4
2545951 13.02.09 67,4
2502216 01.02.09 67,5
2497533 01.02.09 67,2
9 Zeilen ausgewählt.
Ausführungsplan
Plan hash value: 3924867000
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 122 | 8 (25)| 00:00:01 |
| 1 | TABLE ACCESS BY INDEX ROWID| RESULTS | 1 | 39 | 3 (0)| 00:00:01 |
| 2 | NESTED LOOPS | | 1 | 122 | 8 (25)| 00:00:01 |
| 3 | VIEW | VW_NSO_1 | 1 | 83 | 4 (25)| 00:00:01 |
| 4 | HASH UNIQUE | | 1 | 31 | | |
|* 5 | COUNT STOPKEY | | | | | |
| 6 | VIEW | | 1 | 31 | 4 (25)| 00:00:01 |
|* 7 | SORT ORDER BY STOPKEY| | 1 | 31 | 4 (25)| 00:00:01 |
|* 8 | INDEX RANGE SCAN | I_RES_2 | 1 | 31 | 3 (0)| 00:00:01 |
|* 9 | INDEX RANGE SCAN | I_RES_2 | 1 | | 2 (0)| 00:00:01 |
Predicate Information (identified by operation id):
5 - filter(ROWNUM<10)
7 - filter(ROWNUM<10)
8 - access("M_LOC"=14001 AND "M_ARTICLE"='11370-00-00' AND "M_TYPE"='0002'
AND "M_MEASURE"='032')
9 - access("M_LOC"="$nso_col_1" AND "M_ARTICLE"="$nso_col_2" AND
"M_TYPE"="$nso_col_3" AND "M_MEASURE"="$nso_col_4" AND "M_DATE"="$nso_col_5")
Statistiken
1 recursive calls
0 db block gets
36 consistent gets
14 physical reads
0 redo size
748 bytes sent via SQL*Net to client
381 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
9 rows processed

I tried to update my phone last night. When I woke up, it said it needed to be connected to iTunes. I restored my phone and now it won't turn on and keeps saying it needs to be connected to iTunes.

I tried to update my phone last night. When I woke up, it said it needed to be connected to iTunes. I restored my phone and now it won't turn on and keeps saying it needs to be connected to iTunes.

probably need pc or mac update for ios 6 on your home device

Jdev11.1.1.3 - SelectManyChoise loosing last chosen value when hit ENTER

Similar Messages

Maybe you are looking for