JDeveloper problem with actions

Hello
I'm working on my first struts application and I have any problem with actions(I think).
When I run the application, I don't see any data from DB on my page but when I click any of these 4 buttons, then the data load from DB.....Can anybody help me....I want to see my data when the page loads for the first time, not after the button click. Thanks a lot.
(The buttons shows the rows of the table....first,previous,next,last)
<%@ taglib uri="/WEB-INF/struts-html.tld" prefix="html"%>
<html:form action="/zuctzaz.do" >
<table width="100%" height="100%" border="0" cellpadding="0" cellspacing="0">
<input type="hidden" name="<c:out value='${bindings.statetokenid}'/>" value="<c:out value='${bindings.statetoken}'/>" >
<tr>
<td>
<table>
<tr>
<td>
<table>
<tr>
<td><input type="submit" name="event_First" value="First" STYLE="width:35px" <c:out value="${bindings.First.enabledString}" /> ></td>
<td><input type="submit" name="event_Previous" value="Prev" STYLE="width:35px" <c:out value="${bindings.Previous.enabledString}" /> ></td>
<td><input type="submit" name="event_Next" value="Next" STYLE="width:35px" <c:out value="${bindings.Next.enabledString}" /> ></td>
<td><input type="submit" name="event_Last" value="Last" STYLE="width:35px" <c:out value="${bindings.Last.enabledString}" /> ></td>
</tr>
</table>
</td>
<td>
<table>
<tr>
<td colspan="3"><strong>Z�&#269;tovac� z�znam</strong></td>
</tr>
<tr>
<td>Date</td>
<td><input type="text" name="textfield1" value="<c:out value="${bindings['datZuct']}"/>"></td>
<td><c:out value="${bindings['cisPdo']}"/> AND <c:out value="${bindings['zucZazn']}"/></td>
</tr>
<tr>
<td>Place</td>
<td colspan="2">Brusel</td>
</tr>
</table>
</td>
</tr>
</table>
</td>
</tr>
</table>
</html:form>

Hy Again!
I forgot to say one more thing that could be relevant:
If i add any action from the struts-config.xml in the provider for the <defaultAction> of the portlet it works correctly.
So the actions work correctly, the problem is that when sending back to the oracle portal the request with the new action, there is no response.
Pls help!
Thanx, and best regards!
Ado

Similar Messages

  • Problem with: Action Required: Your AOL Username login must transition to Apple ID

    In the early days of the iTunes store, it was possible to log in and make purchases with an AOL screen name. This has since been discontinued. In March 2015, Apple sent out a message to legacy iTunes account holders who have not yet converted their iTunes accounts from an AOL screen name to an Apple ID.
    However, the conversion program seem to be completely mismanaged and full of glitches and problems. If Apple does nothing about this, the company will face costly class action lawsuits by disgruntled consumers who purchased music but will in the future be prevented from playing it.
    I tried to follow the directions, but I am not able to log into the iTunes account under the AOL screen name. I tried to initiate a password recovery through the recovery email, but the recovery message with the re-sent link never arrives.
    I contacted Apple support several times. During very lengthy (several hours long) conversations, we were able to locate the account. However, I was told that Apple cannot reset the password and give me access to the account - I should contact AOL. My appeals that this would be illogical because AOL does not have the power to change passwords on an iTunes store account were ignored, and it was clear that each Apple employees I spoke with just wanted to push the problem on someone else.
    So I contacted AOL and was told that they have nothing to do with this. Nevertheless, we reset the password for the AOL screen name. As I predicted, this made no difference for the iTunes account: I still cannot log in.
    Today I contacted Apple again, and after we we made certain that I we identified the correct iTunes account, the Apple employee manually initiated a recovery e-mail sent to me. However, the confirmation message I received refers to resetting the existing Apple ID (not the iTunes store account we are trying to turn into an Apple ID).
    Clearly, there is a glitch in the system. It somehow intermingles and confuses information from the Apple ID and the AOL Screen Name / iTunes store ID and thinks that we are trying to reset the Apple ID.
    Apple's response was ridiculous: Talk to AOL. (I already have done that and established that changing the AOL SN password does not allow me to gain access to the iTunes account).
    This is my 4th call to Apple. Each lasted several hours (including hold time). Now I've been on hold for about 3 hours while I'm waiting to talk to a higher tier tech support person.
    Does anyone have similar problems with this conversion? Any solutions?

    You need to sign in with just the user name. not with the @aol.com at the end.
    Example: If your AOL username is AOLUSERNAME & your AOL email is [email protected], you must log in with only AOLUSERNAME & your AOL email password & it will prompt you to change it. You can’t use your @aol email, it must be something else.

  • Problem with action links

    I have a relatively simple DVD project with 10 movie sequences each placed on a separate timeline. DVD has just one menu with a Button: "Watch whole movie" which basically sequences all 10 clips and then back to the menu.
    Then I also have 10 Sequence-Buttons on the menu that should only show the respective sequence and then back to the menu.
    1. I set up the action sequence for "Watch the whole movie" m1-m2-m3-m4-m5-m6-m7-m8-m9-m10-menu. No problem with that.
    2. When I then start working on the first sequence button "SCENE 1" the problem starts. What I want is just Scene1-back to the menu. I tried it without and with end action override but then I disturbed the m1-m2-m3-m4-m5-m6-m7-m8-m9-m10-menu sequence.
    I really couldn't figure out this simple task. Maybe somebody can give me a hint. 

    1. I set up the action sequence for "Watch the whole movie" m1-m2-m3-m4-m5-m6-m7-m8-m9-m10-menu. No problem with that.
    Actually, that is the problem. Instead of making the end action of each timeline the next timeline, create a Playlist and sequence the timelines in there. Your play all button links to the playlist. End action of the playlist is Return to last menu.
    Without end actions that go to the next movie, your Scene buttons will work fine. (The end action on each timeline will be "Return to Last Menu."

  • JDeveloper Problem with GUI

    Hi All,
    I'm running JDev 3.1 on Win2000, and I'm having a bit of a problem with redraws of the GUI.
    When I click anywhere on the JDev GUI and trigger and action that involves a GUI redraw the little piece of the GUI under the mouse pointer graphic is not redrawn. It does not effect the functionality but it is annoying and will make the other developers I work with less keen about using it.
    Does anyone else have this problem? Is it a JDev or Win2k problem?
    Cheers
    d

    Probably an issue with the JRE used by JDev. on Win 2k. Have you tried 3.2x? I haven't seen that type of issue with it on Win 2k.

  • Problem with action script to button

    Hello all.
    I'm having a problem with my adobe flash CS3 action script. My button cant link to the other URL. I tried to put an action script but i fail. anyone can help me? here the attachment for my flash document.

    HELLO,
                  just check       navigateToURL()

  • Problem with ACTION (move, rotate, etc) in iBookAuthor with a Keynote file

    Hi everyone,
    I'm doing nice keynote animations with ACTION like rotate an image, move an image, etc. That makes great animation on my Mac screen.
    But when i put that animation (keynote file) in iBookAuthor as a widget, the actions are not showing correctly on the iPad. I can't see them anymore.
    Do you know why?
    Tx
    Steeve

    It would seem that the Keynote widget can only handle the following animations (looks like what you are trying is not included). See http://support.apple.com/kb/HT5067
    Transitions and builds
    These transitions and builds work with the Keynote widget:
    Transitions
    Magic Move
    Cube
    Dissolve
    Drop
    Flip
    Flop
    Iris
    Motion Dissolve
    Move In
    Page Flip
    Pivot
    Push
    Reveal
    Scale
    Twirl
    Twist
    Wipe
    Builds
    Appear or Disappear
    Cube
    Dissolve
    Drop
    Move In or Move Out
    Pivot
    Scale
    Twirl
    Unsupported builds and transitions will be replaced with Dissolve.

  • Problem with action script 3 make input text box and button....

    Hi every one I am trying to make a family book using "Air for Android" with a simple search engin in the book
    air for android only work with AS3,
    the search function is to type a person's name and hit submit then go to a specific frame.
    have a problem making below code to work in AS3 and hopefully one of you guys can lead me in the right direction to fix the issue.
    Currently, I have an input text box and a button. When you type specific words into the input box and then hit the button it sends you to a specific frame.
    (it work find in AS2 but not in AS3,)
    Here is my current code that is placed on the main timeline, first frame:
    stop();
    onEnterFrame = function () {
        submit.onRelease = function() {
            switch (yourname.text) {
            case "name1" :
                gotoAndStop(2);
                break;
            case "name2" :
                gotoAndStop(3);
                break;
    My button that checks if the phrase is correct is called "submit" and my input box has an instance of "yourname".
    My phrases that will be accepted in the input box are "name1" and "name2" which bring me to two different frames.
    Basically, I'm having a problem with making this to work with AS3.

    you should use the default option in the switch statement
    that way yourname contains something not in one of the case statements it will go to the default bit and execute teh code there
    function onSubmit(e:MouseEvent):void
                                  switch (yourname.text)
                                            case "name1":
                                                      gotoAndStop(2);
                                                      break;
                                            case "name2":
                                                      gotoAndStop(3);
                                                      break;
                                            default:
                                                      goToAndStop(you frame you want);
                                            break;

  • Problem with 'action' attriubte when using 'rendered'

    I have something really strange;
    I have a JSF page used to insert a record and when inserting is successful, I set a REQUEST scope parameter called 'saved' with a value of 'true' as following:
    FacesContext.getCurrentInstance().getExternalContext().getRequestMap().put("saved",true);Now, in the JSF page I already have a <h:commandButton ...> on the SAME previous JSF page used to collect the data :
    <h:commandButton rendered="#{requestScope.saved}" action="#{insertionBean.displayNew}" value="Create another"/>As it is shown, the rendering of this button is conditional ONLY after complete inserting. Until now every thing is OK, and the button rendered only as expected, but what is not expected is that when I click on the button the page only reloads and the method in the action attribute is never fired.
    Does the attribute rendered have something to do with RestoreView at the server side? Becasue when I DELETE it, the button fires the method, the problem is only when I use it in this scope.
    How I can accomplish this goal?!
    Thanks for helpful people

    The value of the rendered attribue is re-evaluated during apply request values phase. So you need to transfer it to the next request using h:inputHidden or, better, t:saveState (so that it also survives validations).

  • Problem with Action/Batch

    OK, PS CS4 extended v. 11.0.1 on a Win XP sp3 OS
    I recorded a simple action set
    Open | Set File Info of current document | Save | Close
    I then performed an Automated Batch run to duplicate this on a series of more than 100 photo images in a folder.  In the Batch dialogue box, I clearly identified a new folder - located in the same directory as the original - as the Destination Folder for the images.  However, when the batch process was complete, the newly created folder was EMPTY and all of the photo images in the Source Folder had been rewritten!
    Now, since this was as simple as entering file information, no harm was done to the image files.  However, I have had other times when I run a batch action to resize the images from their raw size to, for instance, 6" X 4" @ 300 dpi for printing.  When these save to the original source folder it IS a problem because my native files are overwritten.
    Did I do something wrong in the action?  Did I set something incorrectly in the batch process?
    If I do this correctly, there should be a screenshot of my action steps and my batch settings here.
    Please help me!  I use this feature A LOT because I am responsible for cataloging all of the photos taken at our airport.
    Thank you!
    Susan

    ZB:  Please don't apologize!  I am grateful for the assistance, I was just confused by the "save" vs. "save as" information and wanted to be certain that I understood what you were saying.  I figure if I'm going to ask someone to share their knowledge/time with me, the least I can do is understand it well enough to put it to use and possibly pass it along to someone else at a later date!  I certainly don't want to have to keep asking the same questions each time I try to do a task.  Oy ve...that would be annoying!
    Thank you very much for your help.  I don't have another project right now to try this with, but I'm certain I will soon enough.  We have a $138 million dollar construction project we are photographing almost daily.
    Again, my heartfelt thanks! 

  • Problem with action events........ :(

    hi all,
    there is a strange problem which me and my colleagues are facing now-a-days......
    For some odd and unknown reason, the links on the page suddenly stops woking... it goes like this....
    we write events (buttons or action links) .... we test them and they are working fine...... than we write some other piece of code and than run the program and links work no more... The program never goes in the action event for the component...... and surprisingly it also dont show an error.... It just keeps on refreshing itself again and again....... (this thing is also verified by using debugger that actions events just stop being called....) it happens for random situations ...... Once i thought that maybe its has to do something with beforeRenderResponse() method... but it happens even in beans without beforeRenderResponse() method.....
    Can anyone tell me whats going on around here???? we are extremely confused here with dead lines approaching fast........
    regards

    I've had this same problem....links were working fine yesterday. I added more functionality which didn't even affect the links, and now they're not working. Unfortunately, I don't have a solution either.
    Has anybody been able to access the logging in the facescontext or application to see what the lifecycle is doing before it stops???

  • Problems with Action menu in 3.1.2.00.02

    Hi,
    I wonder if any one has encountered a similar problem am having with the action menu of Interactive reports in version 3.1.2.00.02. The action items of the action menu do not work for a conditional report.
    If I have the Interactive Report set to display conditional (like on the click of a button) when the report is displayed and I try to select any items on the menu, the following error message appears.
    Error
    A Runtime Error has occurred.
    Do you wish to Debug?
    Line: 1
    Error: 'options' is null or not an object
    Yes No
    If I select no, the space to display the select manu item appears blank and the loading image remains on the page ( close to the top of the page) until I close the page or rerun the report.
    I would appreciate any comments on how to deal with this problem.

    after the installation i queried the dba_registry table
    CODE:
    SELECT STATUS FROM DBA_REGISTRY WHERE COMP_ID = 'APEX';
    STATUS
    LOADED
    According to the installation manual, a successful installation should give
    STATUS
    VALID
    Is this the reason because of which i cannot LOGIN to APEX..
    Please let me know how do i validate this APEX entry in dba_registry...

  • JDeveloper - problems with Tutorial for Java EE Developers

    Hi,
    I am trying to start learning Oracle J2EE technologies, and I am using the Oracle "Tutorial for Java EE Developers (10.1.3.1.0)" listed in the Oracle Application Server 10g (10.1.3) page: http://www.oracle.com/technology/tech/java/oc4j/1013/how_to/index.html.
    I am having problems in chapter 2, at the creating EJB 3.0 Persistence Entities stage, when using the Create Entities from Tables Wizard. Basically, when I select all the tables from the SRDEMO schema and attempt to create the Java classes, only the first table objects are created - ExpertiseAreas.java and ExpertiseAreasPK.java. I do not get any error messages, so I am not sure why the other table objects are not created.
    If I then use the Wizard to select tables individually, the objects are created. However, they appear to be missing some details - specifically the @OneToMany annotation.
    Has anyone encountered this same issue, or are there any known issues with this tutorial.
    I am using version 10.1.3.4 of JDeveloper, on a 10g (10.2) XE database. I installed the version of JDeveloper without JDK included. I have a Sun Java EE 5 SDK Udate 5 (JDK 6u7) install of JDK.
    Thanks,
    Fraser

    Please refer
    http://www.oracle.com/technology/obe/obe1013jdev/10131/10131_ejb_30/ejb_30.htm
    http://www.oracle.com/technology/tech/java/oc4j/ejb3/howtos/howtoejb30mappingannotations/doc/how-to-ejb30-mapping-annotations.html#onetomany

  • Chris Lord save as problems with actions

    Hi..I have been experiencing a frustrating problem. When running an automated batch action which ends with a 'save as' command to a 'action completed' folder, the files keeps overwriting the previous files in the batch and retains name of the first file processed by the action.
    Other actions I have created never had this problem, but all of a sudden it simply refuses to save the individual files without overwriting the previous one.

    Are you setting the batch dialog to override save as steps. also when recording save as steps in actions its best to use the file type pull-down menu to set the file type and not to set the name just take the default so no name is recorded in the action step. Expand your action's save as step make sure no file name has been recorded into the step.

  • Problem with action script from Schewe and Frasier book.

    I am working on a Photoshop CS3 action script to
    open raw files, do a couple of modifications
    in Camera Raw, exit camera raw and save
    the file as a jpeg.
    I think this should work, because I am working
    on an example out of "Camera raw with Adobe
    Photoshop CS3" by Schewe and Frasier which
    shows the step recorded.
    See page 344 of Schewe and Frasier.
    In figure 9-11 you see, after the open
    statement, 10 lines of details like
    "As camera raw"
    "Model:Canon 350d" etc.
    I get the file path and name line, but
    none of the other details reflecting
    actions in Camera Raw.
    The problem is that in setting up the action, none
    of the steps done in camera raw after I do the
    open get recorded.
    And it works in my old CS version !
    Out of frustration I repeated the action
    script creation in my old CS version and
    it worked fine.
    Any idea where I am screwing up ?

    Crappy format justification:
    I sometimes have a day of family
    type pictures that are in raw format
    that I want to put up on the internet
    quickly. I would like to be able to
    apply the "Auto" feature, as in general
    it seems to be pretty good for something
    quick.
    OK, it sorta works in CS, go here
    http://www.angelplace.net/photos/sample.jpg
    It sets up all of the details and gets the
    "As camera raw" but opens the .dng file
    rather than the Camera raw window.
    The point is, these important settings
    seem to be saved, which does not happen
    in CS3.

  • Save As problem with Actions

    I am running CS5 and Snow Leopard, both up to date.
    I ingest photos onto my computer using Bridge or Photomechanic.  When I ingest, I change the name and add a sequence and the date shot, using the ingesting progam's dialog box.  All photos are raw (nef).
    I have recorded an action to use when I have finished working on a nef in CS5.  This is Flatten Image, Convert from Prophoto to sRGB, Save As in specified folder, jpeg, max quality, close, do not save.  When recording the action I keep the file name attached at ingest, but CS5 changes this by replacing .nef by .jpg automatically.
    The problem is that when I run the action on subsequent files, the action automatically changes the file name.  Where the file has been ingested by PhotoMechanic, the file name is the original file name minus the date and number, but with "1 Copy" inserted before .jpg.  Where the file has been ingested by Bridge, the file name is shortened by including the date and the 0 from the number, with "Copy" added before.jpg.
    The really evil thing is that all files to which the action applies are given the same name, with each overwriting its predecessor.  This renders the action useless.
    The action works properly if I do not change the name of the photo when downloading or subsequently, but this is hopeless as it would mean that all my photos had the name attached by the camera.
    If I run the steps in the action as normal manual steps, everything works correctly.  It is only when I run them as an action that this problem arises.
    Any advice greatly appreciated.

    I haven’t given it too much thought actually, but Save As and Save for Web just seem to be troublesome in Actions as they can save specific file-paths.
    May I ask what kind of work you do or what kind of customers you work for?
    The company I work for in turn works mainly for ad agencies and in that context one always has to expect that images will have to be edited/differently recombined later on – so we usually save all layered files no matter what.
    And we use jpg mainly for communication with the customers (and in the final pdf naturally, but not for the images placed in the layouts) as it is a lossy compression.
    Depending on your output-device the bigger color-space can also be beneficial for printing.
    With offset-printing the specific CMYK-space is usually somewhat small itself but if you do fine-art-prints on inkjets converting to srgb may cost you some colors that would actually be achieveable.

Maybe you are looking for

  • I used to have a sidebar before this last update, how can i get it back?

    I used to have a sidebar that showed my playlists, etc before this last update.  Now it is gone.  How can I get it back?

  • CDESK: Start userdefined search program and recieve DIRs

    Hello, We want to use as user specific search program in the CDESK: We defined the menu button created in BADI DESK_TBM_ADDINADD_NEW_FUNCTIONS, in BADI CDESK_TBM_ADDINPROCESS_NEW_FUNCTIONS, the program gets started. I tried to fill the parameter DOCU

  • Hi! I am Suzana Mieles

    Hola mi nombre es Maria Suzana Mieles Briones. Bien, explico el porque de mi razon de escribir a ustedes, debido a mis cambios he solicitado y he enviado mi nuevo identidad apple. Aparte he enviado dando de bajas los siguientes correos... ********** 

  • Audio bounce cuts first eight bars

    Somehow, all my newly-bounced audio files begin at eight bars beyond the start of the region. Example: I verify that a region begins precisely at 1404 1 1 1. Bringing up the Bounce dialog, I see that Logic gives it a Start point of 1412 1 1 1. And af

  • DRQ : Exposing the Tax details tables in PLD

    Hi Experts, Expose the respective Tax details tables in PLD for marketing documents ? For example table INV4 for A/R Invoice. Samir Gandhi