Problem with action events........ :(

hi all,
there is a strange problem which me and my colleagues are facing now-a-days......
For some odd and unknown reason, the links on the page suddenly stops woking... it goes like this....
we write events (buttons or action links) .... we test them and they are working fine...... than we write some other piece of code and than run the program and links work no more... The program never goes in the action event for the component...... and surprisingly it also dont show an error.... It just keeps on refreshing itself again and again....... (this thing is also verified by using debugger that actions events just stop being called....) it happens for random situations ...... Once i thought that maybe its has to do something with beforeRenderResponse() method... but it happens even in beans without beforeRenderResponse() method.....
Can anyone tell me whats going on around here???? we are extremely confused here with dead lines approaching fast........
regards

I've had this same problem....links were working fine yesterday. I added more functionality which didn't even affect the links, and now they're not working. Unfortunately, I don't have a solution either.
Has anybody been able to access the logging in the facescontext or application to see what the lifecycle is doing before it stops???

Similar Messages

JDeveloper problem with actions

Hello
I'm working on my first struts application and I have any problem with actions(I think).
When I run the application, I don't see any data from DB on my page but when I click any of these 4 buttons, then the data load from DB.....Can anybody help me....I want to see my data when the page loads for the first time, not after the button click. Thanks a lot.
(The buttons shows the rows of the table....first,previous,next,last)
<%@ taglib uri="/WEB-INF/struts-html.tld" prefix="html"%>
<html:form action="/zuctzaz.do" >
<table width="100%" height="100%" border="0" cellpadding="0" cellspacing="0">
<input type="hidden" name="<c:out value='${bindings.statetokenid}'/>" value="<c:out value='${bindings.statetoken}'/>" >
<tr>
<td>
<table>
<tr>
<td>
<table>
<tr>
<td><input type="submit" name="event_First" value="First" STYLE="width:35px" <c:out value="${bindings.First.enabledString}" /> ></td>
<td><input type="submit" name="event_Previous" value="Prev" STYLE="width:35px" <c:out value="${bindings.Previous.enabledString}" /> ></td>
<td><input type="submit" name="event_Next" value="Next" STYLE="width:35px" <c:out value="${bindings.Next.enabledString}" /> ></td>
<td><input type="submit" name="event_Last" value="Last" STYLE="width:35px" <c:out value="${bindings.Last.enabledString}" /> ></td>
</tr>
</table>
</td>
<td>
<table>
<tr>
<td colspan="3"><strong>Z�čtovac� z�znam</strong></td>
</tr>
<tr>
<td>Date</td>
<td><input type="text" name="textfield1" value="<c:out value="${bindings['datZuct']}"/>"></td>
<td><c:out value="${bindings['cisPdo']}"/> AND <c:out value="${bindings['zucZazn']}"/></td>
</tr>
<tr>
<td>Place</td>
<td colspan="2">Brusel</td>
</tr>
</table>
</td>
</tr>
</table>
</td>
</tr>
</table>
</html:form>

Hy Again!
I forgot to say one more thing that could be relevant:
If i add any action from the struts-config.xml in the provider for the <defaultAction> of the portlet it works correctly.
So the actions work correctly, the problem is that when sending back to the oracle portal the request with the new action, there is no response.
Pls help!
Thanx, and best regards!
Ado

At event calendering site, getting message "There was a problem with your event submission. If you have disabled JavaScript please enable it and try your submission again." Javascript is ENABLED on my computer.

I'm trying to submit an event to the events calendar at http://calendar.jtnews.net/events/index.php?com=submit. After I enter the Authentication words and press Enter, I get the message, "There was a problem with your event submission. If you have disabled JavaScript please enable it and try your submission again." According to my Firefox/Tools, etc., button, Javascript is enabled. I

Hello mjswooosh,
I'm very disheartened to hear that you've had ongoing problems when attempting to order from BestBuy.com. Our goal is ever to provide a fun and efficient shopping environment! Certainly creating aggravation serves neither you nor us and I apologize sincerely for this having been your experience.
We recommend the troubleshooting steps you mentioned (i.e., clearing the browser cache, deleting temporary internet files and cookies) because this is the most common cause of this type of problem. I too have encountered this issue from time to time and these steps have almost always resolved the problem. I say almost always because there's one further step you can try: ensure that you have signed out of BestBuy.com, then perform the browser maintenance steps we've recommended. Afterward, before signing in to BestBuy.com, add your desired items to your cart and sign in as part of the checkout process. When the standard steps have not netted a resolution for me, this has solved the problem each time.
I hope this helps. I'm very grateful that you took the time to write to us with your concerns and for sharing your very valuable feedback about your online experience.
Sincerely,
John|Social Media Specialist | Best Buy® Corporate
Private Message

Problems with close event scripts and closing Photoshop

Hi!
We are having problems with close event scripts ("Cls ") when closing/quitting Photoshop.
The close event scripts are working without problem when closing an image. But when quitting Photoshop without having closed all images we are observing the following behaviour:
with CS2 the close event scripts are not triggered at all
with CS4 the close event scripts are triggered and executed correctly. But after that the Photshop process freezes. No visible GUI, you have to kill the process with the task manager.
I can reproduce this behaviour even with a small script consisting of a single alert('hello') and even an empty script. Is this an known bug or am I doing something wrong?
Thanks for your help!
Eric

Check your energy saver settings under system preferences. That is where you set sleep setting.

Problem with halcyon event adapter

Can anyone help me with the following problem I have with the installation of the Halcyon Prime alert event action module on my SunMC 3.6.1 which is installed on a Solaris 10 zone.
Installation of Halcyon eventaction module 2.2.0b seems to be ok but if I try to add an new action the script tab stays empty.
I placed the scripts in the /var/opt/SUNWsymon/bin/HALEventAction file system with root as owner as described. Are there more reguirements ?
Thanks in advance.

It seems to be a problem with our console client.
The webstart method I used to start the console with has this problem.
The windows console client works fine.
Thanks anyway

Problems with Repeating Events on Palm and iCal

Hi,
I'm having a problem with daily-repeating events entered into either my Palm or iCal. When I put events in my palm and sync them to iCal, the iCal calendars look right, but then the Palm events become truncated,i.e. only the first day of daily event will be visible. If I do nothing but just sync again, the events in iCal become weirdly duplicated, i.e. if an event had two repeats, the "original" occurrance will be there, along with a second, starting on next day of the series, lasting for the same number of repeats. Is there any way to make one calendar the overwriting calendar while using iSync? Or do you know of some other fix? This problem doesn't seem to affect other repeating events, either monthly or yearly.
Thanks
20" iMac with Intel Mac OS X (10.4.10) 500 GB HD, 2GB RAM 60GB Video iPod

As I just posted in another thread, there are a whole series of 'representation disconnects' between the Palm calendaring application and iCal.
While this article— iSync: About Syncing Recurrent Events Between iCal and Palm OS Based Devices—would lead to you believe that iSync is primarily the issue, it's not: this behavior occurs primarily because of the differences between the calendaring programs in each environment, and only secondarily because of the manner in which records are pushed and pulled by the synchronization framework.
iSync itself is simply another compliant sync client, and there is unfortunately no workaround for the issues delineated in the article.

Problem with: Action Required: Your AOL Username login must transition to Apple ID

In the early days of the iTunes store, it was possible to log in and make purchases with an AOL screen name. This has since been discontinued. In March 2015, Apple sent out a message to legacy iTunes account holders who have not yet converted their iTunes accounts from an AOL screen name to an Apple ID.
However, the conversion program seem to be completely mismanaged and full of glitches and problems. If Apple does nothing about this, the company will face costly class action lawsuits by disgruntled consumers who purchased music but will in the future be prevented from playing it.
I tried to follow the directions, but I am not able to log into the iTunes account under the AOL screen name. I tried to initiate a password recovery through the recovery email, but the recovery message with the re-sent link never arrives.
I contacted Apple support several times. During very lengthy (several hours long) conversations, we were able to locate the account. However, I was told that Apple cannot reset the password and give me access to the account - I should contact AOL. My appeals that this would be illogical because AOL does not have the power to change passwords on an iTunes store account were ignored, and it was clear that each Apple employees I spoke with just wanted to push the problem on someone else.
So I contacted AOL and was told that they have nothing to do with this. Nevertheless, we reset the password for the AOL screen name. As I predicted, this made no difference for the iTunes account: I still cannot log in.
Today I contacted Apple again, and after we we made certain that I we identified the correct iTunes account, the Apple employee manually initiated a recovery e-mail sent to me. However, the confirmation message I received refers to resetting the existing Apple ID (not the iTunes store account we are trying to turn into an Apple ID).
Clearly, there is a glitch in the system. It somehow intermingles and confuses information from the Apple ID and the AOL Screen Name / iTunes store ID and thinks that we are trying to reset the Apple ID.
Apple's response was ridiculous: Talk to AOL. (I already have done that and established that changing the AOL SN password does not allow me to gain access to the iTunes account).
This is my 4th call to Apple. Each lasted several hours (including hold time). Now I've been on hold for about 3 hours while I'm waiting to talk to a higher tier tech support person.
Does anyone have similar problems with this conversion? Any solutions?

You need to sign in with just the user name. not with the @aol.com at the end.
Example: If your AOL username is AOLUSERNAME & your AOL email is [email protected], you must log in with only AOLUSERNAME & your AOL email password & it will prompt you to change it. You can’t use your @aol email, it must be something else.

Problem with action links

I have a relatively simple DVD project with 10 movie sequences each placed on a separate timeline. DVD has just one menu with a Button: "Watch whole movie" which basically sequences all 10 clips and then back to the menu.
Then I also have 10 Sequence-Buttons on the menu that should only show the respective sequence and then back to the menu.
1. I set up the action sequence for "Watch the whole movie" m1-m2-m3-m4-m5-m6-m7-m8-m9-m10-menu. No problem with that.
2. When I then start working on the first sequence button "SCENE 1" the problem starts. What I want is just Scene1-back to the menu. I tried it without and with end action override but then I disturbed the m1-m2-m3-m4-m5-m6-m7-m8-m9-m10-menu sequence.
I really couldn't figure out this simple task. Maybe somebody can give me a hint.

1. I set up the action sequence for "Watch the whole movie" m1-m2-m3-m4-m5-m6-m7-m8-m9-m10-menu. No problem with that.
Actually, that is the problem. Instead of making the end action of each timeline the next timeline, create a Playlist and sequence the timelines in there. Your play all button links to the playlist. End action of the playlist is Return to last menu.
Without end actions that go to the next movie, your Scene buttons will work fine. (The end action on each timeline will be "Return to Last Menu."

Problems with KEY_UP event

I'm doing some work at the moment on a program and have noticed that it is (very occasionally) not registering KEY_UP events, which is causing major issues with my code. It never seems to do this with KEY_DOWN events.
Anyone had this problem before? Is it a known issue? Any help appreciated

Hi Martin,
Look at the following posts:
Help catching Control-K
Trapping ctrl k
It looks like you cannot trap this event. I also investigated with EventSpy and don't get any event in if I use Ctrl and any other character. If pressing CtrlShiftk you get KeyPressed = 34 and not 107 anymore as k is now uppercase because of shift.
Hope it helps,
Adele

Intermittent Problem with Business Event.

Hi,
I have a problem with a BES Event. My suspicions are that the event is intermittently nor firing. It's custom code subscribed to '*.apps.ar.hz.PersonProfileExtAttr.Update' (an EBS Person Profile Extensible Attribute Update).
In the first lines of the custom code an audit is written to a table. For some one the updates to the Extensible Attribute no audit is written.
The table HZ_PARAM_TAB is cleared for the item
Q: Is there a way to prove that the BES Event did/did not fire?
Thanks in Advance,
Kieran.

Kieran,
Never experienced any performance issues when setting this profile option. However, you may review the following documents.
Note: 280849.1 - How To Purge/Delete The Information From HZ_PARAM_TAB Table ?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=280849.1
Note: 187275.1 - TCA API Callouts/Workflow 2.6 Business Event System: Performance Issue
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=187275.1
Note: 171703.1 - 11.5.x: Implementing Oracle Workflow Directory Service Synchronization
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=171703.1
Regards,
Hussein

Problem with Script Events Manager buttons not showing up

Hi,
First off let me say that the latest release of Adobe products is a steaming pile of @#$#$.
Countless software issues, it's slow, buggy, you name it.
That being said, has anyone had this problem and know how to fix it.
My Script Events Manager is broken. Yes broken. The only buttons I see are "Done" and "Remove". There is no "Add" button so that I can actually add events. Someone please tell me this is user error and that I don't need to reinstall PS.

My system has 8 Gb of Ram and 4 processors. I doubt it's the system. I've had problems with CS Master Collection since day one. My main complaint is the ******* tabs and interface. Everything is so chunky. CS2 was smooth as butter. They keep making their products use more RAM and it's ridiculous. The tabs don't help, they only make life harder.
Thanks for the suggestions, I was hoping not to have to reinstall PS, but looks like it's the only option.

Problem with action script to button

Hello all.
I'm having a problem with my adobe flash CS3 action script. My button cant link to the other URL. I tried to put an action script but i fail. anyone can help me? here the attachment for my flash document.

HELLO,
just check navigateToURL()

Problem with ACTION (move, rotate, etc) in iBookAuthor with a Keynote file

Hi everyone,
I'm doing nice keynote animations with ACTION like rotate an image, move an image, etc. That makes great animation on my Mac screen.
But when i put that animation (keynote file) in iBookAuthor as a widget, the actions are not showing correctly on the iPad. I can't see them anymore.
Do you know why?
Tx
Steeve

It would seem that the Keynote widget can only handle the following animations (looks like what you are trying is not included). See http://support.apple.com/kb/HT5067
Transitions and builds
These transitions and builds work with the Keynote widget:
Transitions
Magic Move
Cube
Dissolve
Drop
Flip
Flop
Iris
Motion Dissolve
Move In
Page Flip
Pivot
Push
Reveal
Scale
Twirl
Twist
Wipe
Builds
Appear or Disappear
Cube
Dissolve
Drop
Move In or Move Out
Pivot
Scale
Twirl
Unsupported builds and transitions will be replaced with Dissolve.

Problem with action script 3 make input text box and button....

Hi every one I am trying to make a family book using "Air for Android" with a simple search engin in the book
air for android only work with AS3,
the search function is to type a person's name and hit submit then go to a specific frame.
have a problem making below code to work in AS3 and hopefully one of you guys can lead me in the right direction to fix the issue.
Currently, I have an input text box and a button. When you type specific words into the input box and then hit the button it sends you to a specific frame.
(it work find in AS2 but not in AS3,)
Here is my current code that is placed on the main timeline, first frame:
stop();
onEnterFrame = function () {
    submit.onRelease = function() {
        switch (yourname.text) {
        case "name1" :
            gotoAndStop(2);
            break;
        case "name2" :
            gotoAndStop(3);
            break;
My button that checks if the phrase is correct is called "submit" and my input box has an instance of "yourname".
My phrases that will be accepted in the input box are "name1" and "name2" which bring me to two different frames.
Basically, I'm having a problem with making this to work with AS3.

you should use the default option in the switch statement
that way yourname contains something not in one of the case statements it will go to the default bit and execute teh code there
function onSubmit(e:MouseEvent):void
                              switch (yourname.text)
                                        case "name1":
                                                  gotoAndStop(2);
                                                  break;
                                        case "name2":
                                                  gotoAndStop(3);
                                                  break;
                                        default:
                                                  goToAndStop(you frame you want);
                                        break;

Problem with PA30 event LIS1

Hi all,
I have a problem with PA30, I have three kind of subtyes, AS, CO, DI for a Z infotype, but I have a requirement, when I push the mountain(LIS1) list style for all subtypes, don't see the AS type, because the user does`'t need and is confused for him, but he need to see the 'AS' when he puts the subtype in the field of pa30, because he needs to create and delete it in some case, just when he push the LIS1 don't see it,
so the question is, is any way to do this ? I've been seeing by user exit and badis but the P9105 is a structure, so i can't get al the table to delete teh 'AS' or maybe have another name, or some place where it fill the table that display.
Some suggestions??
Please let me know.
Thanks a lot.

Explore dynpro 3000 of your Z infotype (MPnnnn00 report in se80)

Problem with action events........ :(

Similar Messages

Maybe you are looking for