JEditorPane displays html font very large.

I have a JEditroPane embedded into a JScrollPane. The url for the EditorPane is an html file. It laods and displays. However, my html font is set to 8 but what is displayed appears to be at 12 point or higher. Is there a way to alter the font size of the html text displayed inside the JEditorPane?
Thanks.

Can anyone explain how to change the font size for the
entire html document set to the JEditorPane? The
default size is too large and any attmept to perform a
setFontSize fails.
Thanks.I'm posting this to save you time by letting you give up hope on finding some simple solution to your problem.
There may not be any.
I've just tried loading my html file into a JEditorPane and all characters appear in default regular size. It seems JEditorPane is not processing any stylesheets info which I use to define all text attributes.
The API document says:
"text/html
HTML text. The kit used in this case is the class javax.swing.text.html.HTMLEditorKit which provides HTML 3.2 support. "
3.2 is pretty old, isn't it? What's the HTML version you used to create your HTML files?
How do you set font size in your html files? A sample html file from Sun for a Text demo program uses the following and it seems to work:
<font size=-2>from</font> a
<font size=+2">URL</font>
If you decide to modify your existing HTML files, use the above format.
(Wait! Why do we need to modify perfectly working html files to make them appear normal in Java programs? It should be the other way around! :D)

Similar Messages

Displaying swf fonts, not working

In Adobe Shockwave Flash player object, are there any known differences between version 12.0.0.77 and 12.0.0.44 with regards to displaying swf fonts, in Internet Explorer? We have seen a variety of issues with almost all versions. We had 12.0.0.77 installed and the fonts were displayed quite improperly - very Large - , and then we downgraded to 12.0.0.44 and it worked, displaying the fonts properly. Then it upgraded to 12.0.0.77 and it worked again.
This happens in Internet Explorer, all versions. We have a heavy install on IE8 where we see if most.
What changes between the two versions would cause this?
What connections are required between the client and the server, if any?
In the page source, these transformations are triggered in statements similar to this one:
sIFR.replaceElement("h4", named({sFlashSrc: "/SiteCollectionImages/sIFR/neosans.swf", sColor: "#333", sCase: "upper", sWmode:"transparent"}));
Any idea what may cause such odd, inconsistent behaviour?

This is a flash or shockwave font, no real development involved I believe. The fact is it worked for years, then Adobe did an upgrade on the Object and it did not work. So just wondering what may have caused this in the release on the updated object.
It also does not work in Firefox, Chrome etc, as these browsers act as if it's not enabled. So it seems like there is a handshake that is not being addressed, access to the server-side font for example.
The font stopped working because of the change in the client side Object, not with anything on the server, development-wise.
In several places, in some companies, IE accounts for 100% of the browsers. And in some of those places IE8 may account for close to 100% of those installs. To dismiss a query because it involves IE is not really helpful, or constructive.
Are there any dependencies on the Object running and the server presenting the material, or could it be rights within the browser environment that may have changed (running javascript with prpoer permissions for example)?
Thanks, in advance, Dave

Very large cursor

Using most applications, Stickies, TextEdit, Quark, the initial display cursor is very large, 1.5". I can type and the text is the usual size, I think Helvetica 12 pt as default, but the cursor is still way too big. When I change the point size of the text either larger or smaller, the cursor eventually becomes a normal size.
Also, Mac Help menu displays the text of the help pages with gigantic spacing between each line of type, even though the text is normal size.
It's as if the default leading has become very large, although I haven't made that change that I know of.
Any ideas of what to do?
G4 Mac OS X (10.2.x)
G4 Mac OS X (10.2.x)
G4 Mac OS X (10.2.x)
G4 Mac OS X (10.2.x)

Hi-
Welcome to Discussions!
Open your System Preferences/Universal Access preference pane, check in "Seeing" to insure that "Zoom" isn't selected.
Also check the settings for "Mouse"- you can move the slider to change the size of the cursor.
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, 300gbSATA+160gbATA, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, ExtHD 160gb x2, 23"Cinema Display, Ratoc USB2.0, Nikon Coolscan

Display of the images became very large in macbook air, display of the images became very large in macbook air

suddenly the display became very large. it seems like the dsiplay for the handicap as if in ipad. How to restore to normal display? Thank

This link may help http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp2368.html

PC suite opening in VERY large fonts

when i click on pc suite it opens up very lage....
can someone tell me how to get it back to normal size?

Roberth
It is possible that your PC suite is unable to read your PC default fonts.
Once you open the PC suite with large fonts just check in control panel > display > appearence > font size. It should read as normal. If it does then you have a problem with PC suite
If my post has helped you please click the white star on the right

I was recently sent a very large emoji message amd now when i try to acces messages it will not display mesagges and then will bring me back to the home page

was recently sent a very large emoji message amd now when i try to acces messages it will not display mesagges and then will bring me back to the home page

Quit the messages app and reset your phone.
Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it jiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally. Then reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart.
After the phone restarts go into Messages and delete the thread containing the problem message.

Help -- How to display Html text in a JEditorPane

I'm trying to display html in a JEditorPane (html is obtained by transforming Xml and Xsl). So after i do the transformation i have a string which is the html source to be displayed. But when i use editorpane.setText(htmlString) method it is displaying the html source in the editorpane. I also tried using the HTMLEditorKit's read method. Even then its displaying the html source. But when i store the html source as a html file and give the editorpane, the url of the html file, it displays properly.
I would be so grateful if u can help in displaying the html (which i have as a string) instead of the source...
Thank you so much...

Hi, after struggling with problem, the solution seems to be to ditch the content type meta tag, JEditorPane seems to barf (silently!) on this...
So, to turn this off...
transformer.setOutputProperty(OutputKeys.ENCODING,"");
Cheers
Greg

Displaying HTML character entities in JEditorPane

Hi,
I have noticed that when displaying HTML character entity references in a JEditorPane it will show some of them, e.g. © for copyright symbol but not others e.g. ’ for "curly" single quote.
Is there any way to get JEditorPane to show all (most?) of them?

Create a class that extends ComboBox and override the
updateDisplayList and measureText functions. Then use that new
ComboBox in your code:
<local:HtmlComboBox .. xmlns:local="components.*".>
<local:itemRenderer>
<mx:Component>
<mx:Text htmlText="{data.label}" />
</mx:Component>
</local:itemRenderer>
</local:HtmlComboBox>
Put this into a folder called "components" and name the file
HtmlComboBox.as
package components
import mx.controls.ComboBox;
import flash.text.TextLineMetrics;
public class HtmlComboBox extends ComboBox
public function HtmlComboBox()
super();
override protected function
updateDisplayList(unscaledWidth:Number, unscaledHeight:Number):void
super.updateDisplayList(unscaledWidth,unscaledHeight);
var s:String = textInput.text;
textInput.htmlText = s;
override public function
measureText(text:String):TextLineMetrics
return measureHTMLText(text);
}

How can NI FBUS Monitor display very large recorded files

NI FBUS Monitor version 3.0.1 outputs an error message "Out of memory", if I try to load a large recorded file of size 272 MB. Is there any combination of operating system (possible Vista32 or Vista64) and/or physical memory size, where NI FBUS Monitor can display such large recordings ? Are there any patches or workarounds or tools to display very large recorded files?

Hi,
NI-FBUS Monitor does not set the limitation on the maximum record file size. The physical memory size in the system is one of the most important factors that affect the loading of large record file. Monitor will try loading the entire file into the memory during file open operation.
272MB is a really large file size. To open the file, your system must have sufficient physical memory available. Otherwise "Out of memory" error will occur.
I would recommend you do not use Monitor to open a file larger than 100MB. Loading of a too large file will consume the system memory quickly and decrease the performance.
Message Edited by Vince Shen on 11-30-2009 09:38 PM
Feilian (Vince) Shen

My display is very large

My son used my imac and played a game via the internet. Now my display is very large and I can not make it smaller. Any suggestions

Check the resolution in System Preferences > Displays > Display tab > set to the highest resolution.
In SL it's the last on the list, in Lion it's the first one.
Regards,
Captfred

When using reader, the font gets very large on last page and I cant change it

when using reader, the font gets very large on last page and I cant change it

You cannot edit PDF files with Reader. You can change the View options to make what you see smaller. View -> Zoom

Regarding displaying html page in a JEditorPane

i want to display a html page in a JEditorPane but the problem is it is displying the page but the script part of html page is printed as it is in the pane . please tell the solution for it . i will be highly thankful to u.

What you are doing exactly? you are displaying the html file into a JEditorPane or After displaying you are tring to Print it out in the Paper or what.
If this the First Sinario then this code will help you.
import javax.swing.*;
import java.awt.*;
import java.net.URL;
import java.net.MalformedURLException;
import java.io.*;
import javax.swing.text.*;
import javax.swing.event.*;
public class Htmlexample extends JInternalFrame {
     //Constructor of Class.
     public Htmlexample () {
          //super(Title, Resizable, Closable, Maximizable, Iconifiable)
          super (title, true, true, true, true);
          setSize (500, 350);
          HtmlPane html = new HtmlPane ("Help/Keys.htm");
          setContentPane (html);
          setVisible (true);
//Following Class Show HTML Help inside an EditorPane.
class HtmlPane extends JScrollPane implements HyperlinkListener {
     JEditorPane html;
     public HtmlPane (String filename) {
          try {
               File f = new File (filename);
               String s = f.getAbsolutePath();
               s = "file:" + s;
               URL url = new URL (s);
               html = new JEditorPane (s);
               html.setEditable (false);
               html.addHyperlinkListener (this);
               JViewport vp = getViewport();
               vp.add (html);
          catch (MalformedURLException e) { }
          catch (IOException e) {     }
     //Function Perform By the HyperLinks of HTML Help File.
     public void hyperlinkUpdate (HyperlinkEvent e) {
          if (e.getEventType() == HyperlinkEvent.EventType.ACTIVATED) {
               linkActivated (e.getURL());
     //Function for Loading other HTML Pages in Your HTML Help.
     protected void linkActivated (URL u) {
          Cursor c = html.getCursor();
          Cursor waitCursor = Cursor.getPredefinedCursor (Cursor.WAIT_CURSOR);
          html.setCursor (waitCursor);
          SwingUtilities.invokeLater (new PageLoader (u, c));
     //Following Class Load Other Pages Included in Our HTML Help File.
     class PageLoader implements Runnable {
          //Constructor of Class.
          PageLoader (URL u, Cursor c) {
               url = u;
               cursor = c;
          public void run () {
               if (url == null) {
                    html.setCursor (cursor);
                    Container parent = html.getParent();
                    parent.repaint();
               else {
                    Document doc = html.getDocument();
                    try {
                         html.setPage (url);
                    catch (IOException ioe) {
                         html.setDocument (doc);
                         getToolkit().beep();
                    finally {
                         url = null;
                         SwingUtilities.invokeLater (this);
          URL url;
          Cursor cursor;
}if there is any other issue Let me Know
Thank you
Jofin

JEditorPane doesn�t display HTML special char. codes

My application is using JEditorPane to display text/html.
The problem comes when I try to display HTML special character codes such as
> JEditorPane ignores those codes and displays nothing.
Do I have to convert all those strings representing special characters?
How could I solve it?
Thanks in advance,
Bruno

Here's my solution - I replace the HTMLEditorKit if it's not the first pass through. I found that the EditorKit is an instance of HTMLEditorKit for every pass except the first (which doesn't have a problem).
EditorKit ek = displayJEditorPane.getEditorKit();
if( ek instanceof HTMLEditorKit ) {
     // Needs to be replaced
     HTMLEditorKit htmlEditorKit = new HTMLEditorKit();
     displayJEditorPane.setEditorKit( htmlEditorKit );
// Display the HTML document
displayJEditorPane.setPage( resultURL );I'll spread my Duke Dollars around to everyone who offered a suggestion later today if I don't hear of a better solution.
Thanks.

Iphone 3GS displaying icons very largely.......

I am facing a very strange problem, my iphone model 3GS is displaying icons on the screen very large in size, than the usal format.
I tried to solve the problem by switching on/off, tried the settings options.
But did not go for restoring the factory settings, because of the doubt i may lose all the contacts saved in the phone.
Please advise any solution and clear the doubt of losing the saved contacts if i apply the factory resetting option.

If you select erase all content and settings on your iPhone, this does exactly as provided - it will erase all content and settings - everything but the firmware/included software.
If you restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup, the same applies.
Contacts are designed to be synced with a supported application on your computer. With Windoze, this can be with Outlook 2003 or 2007 along with syncing calendar events, or with Windows Contacts for syncing contacts only - the address book used by Windows Mail with Vista.
If you aren't currently using a supported application on your computer for contacts - the address book is empty, before syncing contacts with the application enter one contact in the application on your computer. Make this contact up if needed, which can be deleted later. This will provide a merge prompt with the first sync for this data, which you want to select. Contacts between the two will be kept synchronized with following syncs. Syncing contacts with a supported application on your computer is selected under the Info tab for your iPhone sync preferences with iTunes. You can do this before restoring your iPhone with iTunes which will also give you access to your contacts on your computer.

When writing an email the letters are so small that I can hardly read them. If I increase the size then the outgoing email letters are very large.

letters are very large. I have tried changing the font but it doesn't help. This is very annoying. How can I remedy this?

I use these settings, so try them:
Tools > Options > Display > Formatting tab
or
Menu icon > Options > Options > Display > Formatting tab
* eg: Default font: Arial
* size 14
Note: this sets the default font to be used in both display of messages and the font to use as default in composing messages.
Under Plain text Messages
* select: Style : Regular Size: Regular and colour Black
* Click on 'Advanced' button
* make sure all sizes - 14
* select; 'allow messages to use other fonts'
* Select; 'Use fixed width fonts for plain text messages'
* click on OK
Note: This will use the default eg: Arial to be used, but allows the display of messages to use other fonts if the sender specified them.
then at top click on 'Composition' > General tab
note: This sets the default composing text colour and background colour.
under HTML
* Font: Variable width
* Size : Medium
* Select a text colour for writing emails eg: Blue
* Select background colur eg: white
click on OK to save and close Options.

JEditorPane displays html font very large.

Similar Messages

Maybe you are looking for