JFilchooser error on Webstart application with latest JRE download

Recently we have observed that with the latest versions of JRE downloads the JFilechooser does not pop up and on some machines and on some machines it throws out a 3184 error message on windows vista machines.
We are seeing this error occuring only on Vista .Everything works fine on XP though.
We have a java web start application which runs on the client machine and it has functionalities where it opens the jfilechooser.
Unfortunately with the latest update of JRE this is giving very big problems for us and im not sure how to fix this problem.
Can someone help us with this problem and provide a solution.
My class definition looks like this
FileAndDirectorySelection extends JPanel implements ActionListener {
JFileChooser fc;
fc = new JFileChooser(".");
fc.setCurrentDirectory(exportDefaultDirectory);
Not sure how to fix this problem but any help would be greatly appreciated.
Thanks
Chetan

BIBeans version 10.1.2.0.1 is certified only with Sun JRE:
1.3.1_11
1.4.1_04
1.4.2_03

Similar Messages

How to launch a Java WebStart application with older JREs when Java 7u25 is on the client?

How can I launch older versions of my Java WebStart application, that are built and run with Java 7u21 or earlier, even if Java 7u25 is installed locally on the client? Application launch and behaviour must be reliable and consistent.
Background:
As of 7u25 (and later), Java Webstart applications launch with a different class loader than pre-7u25.
My Java Webstart application has supported versions that were built with older versions of the JDK (e.g. Java 5, 6, 7u21 or earlier). These applications run with their required JRE version, enforced through JNLP. Once Java 7u25 is installed locally, these older applications fail to launch, due to classloader differences.
The question is: what is required to run older Java WebStart applications even if 7u25 (or later) Java Webstart is installed locally on the client?

I confirm your findings when using shortcuts to try specific versions of JavaWS with 7u25 or later installed:
JRE 5u14 launched and the classloader was as pre 7u25
JRE 6u43 would not launch
JRE 7u21 launched but the classloader was not as pre 7u25
You can launch the shortcut with the JavaWS -verbose option to display a messagebox with valuable information.
I am keeping a close watch on this thread.

Error in bibean applet with latest JRE

We have bi bean application developed using Applet It works fine with
JRE 1.5 or earlier JRE version but when I access same thing in PC that has JRE 1.5.0_09 it gives XML error
<Line 5, Column 21>: XML-20123: (Fatal Error) '>' Missing from end tag.
<Line 5, Column 21>: XML-20100: (Fatal Error) Expected 'EOF'.
java.lang.NullPointerException
     at oracle.dss.persistence.persistencemanager.server.PersistenceManagerSupport.loadFactoryFromXML(PersistenceManagerSupport.java:359)
     at oracle.dss.persistence.persistencemanager.server.PersistenceManagerSupport.<init>(PersistenceManagerSupport.java:157)
     at oracle.dss.persistence.persistencemanager.server.PersistenceManagerImpl.<init>(PersistenceManagerImpl.java:88)
     at oracle.dss.persistence.persistencemanager.server.InitPersistenceManagerFactory.getInitialContext(InitPersistenceManagerFactory.java:36)
     at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
     at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
     at javax.naming.InitialContext.init(Unknown Source)
     at javax.naming.InitialContext.<init>(Unknown Source)
     at javax.naming.directory.InitialDirContext.<init>(Unknown Source)
     at oracle.dss.persistence.persistencemanager.server.InitialPersistenceManager.<init>(InitialPersistenceManager.java:105)
     at oracle.dss.connection.server.drivers.persistence.PersistenceConnectionDriverImpl.connect(PersistenceConnectionDriverImpl.java:150)
     at oracle.dss.connection.server.ConnectionImpl.connect(ConnectionImpl.java:285)
     at oracle.dss.connection.client.Connection.connect(Connection.java:425)
     at oracle.dss.connection.client.Connection.connect(Connection.java:342)
     at oracle.dss.metadataManager.client.MetadataManager.setConnectionObjects(MetadataManager.java:4235)
     at oracle.dss.metadataManager.client.MetadataManager.attach(MetadataManager.java:924)
     at oracle.dss.metadataManager.client.MetadataManager.attach(MetadataManager.java:840)
     at oracle.dss.datautil.client.XMLManagerFactory.createQueryManager(XMLManagerFactory.java:196)
     at oracle.dss.datautil.client.ManagerFactoryImpl.lookupQueryManager(ManagerFactoryImpl.java:178)
     at oracle.dss.datautil.client.ManagerFactoryImpl.lookupMetadataManager(ManagerFactoryImpl.java:221)
     at oracle.dss.datautil.client.ManagerFactoryImpl.lookupManager(ManagerFactoryImpl.java:128)
     at edsl.olap.BIView.getMetadataManager(BIView.java:436)
     at edsl.olap.BIView.openView(BIView.java:565)
     at edsl.olap.BIView.jbInit(BIView.java:123)
     at edsl.olap.BIView.init(BIView.java:112)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

BIBeans version 10.1.2.0.1 is certified only with Sun JRE:
1.3.1_11
1.4.1_04
1.4.2_03

Have a wrt54g, v6.1 updated with latest firmward download...

Have a wrt54g, v6.1 updated with latest firmward download. No problems for about a year. Now, problem is, almost daily I'll connect to the net, browse just a screen or two, and get the "cannnot connect" message. Have learned to go into the router (status says connected) and I have to clone the mac address from my pc to the router, go back to status, disconnect, then connect. Then I can go on browsing for hours, no more trouble. Any ideas what I can do so don't have to clone mac so often?

you got cable for your internet provider right? So, it's is really nessecary to do MAC CLONE for cable connections...sometimes that is a must for cable connections..
LinksysGuy

Error deploying the application with Crystal Report

Hello,
I'm using Visual Studio 2010 and I installed the required version of crystal report for it. I'm developing a windows Application with C# and Crystal Reports. The program runs correctly in the visual studio but when I tried to deploy it by adding the setup it gives me the following warnings:
- Unable to find dependency 'MICROSOFT.VISUALSTUDIO' (Signature='B03F5F7F11D50A3A' Version='1.0.5000.0') of assembly 'crdb_adoplus.dll'
+- The 'SAP Crystal Reports Runtime Engine for .NET Framework 4.0' item selected requires 'Microsoft.Net.Framework.2.0'. Select the missing prerequisite in the Prerequisites Dialog Box or create a bootstrapper package for the missing prerequisite.     +
- No 'HomeSite' attribute has been provided for '.NET Framework 2.0 SP2', so the package will be published to the same location as the bootstrapper.
I tried to ignore the warnings and deploy it but when I try to open the crystal report and in the program it gives me an error message then an empty report.
I also tried in the Prerequisites to choose the option : Download prerequisites from the same location as my application. but when I do that I receive the following errors:
- The install location for prerequisites has not been set to 'component vendor's web site' and the file 'MDAC28\mdac_typ.exe' in item 'Microsoft Data Access Components 2.8' can not be located on disk. See Help for more information.
- General failure building bootstrapper.
- Unrecoverable building error.
of course In addition to the previous error.
I'm not using the click-once deployment.
Can you please help and advice me with that? I tried to search through the net for these warnings but with no luck of the solution.
Thank you,

No, .Net Framework 2 is not installed. I'm using windows 7 so I installed .Net framework 4. I tried to Install .Net 2 but it doesn't install because of windows 7. I also tried to add it in the prerequisites but again with no luck in solving the issue.
If I try to deploy the App and install it. When I try to open the crystal report the app crushes and gives me the following error:
Report load failed.
exceptions:
CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException: Unsupported Operation. A document processed by the JRC engine cannot be opened in the C++ stack.
   at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
   at DataViewer2.Form5.crystalReportViewer1_Load(Object sender, EventArgs e)
   at System.Windows.Forms.UserControl.OnLoad(EventArgs e)
   at CrystalDecisions.Windows.Forms.CrystalReportViewer.OnCreateControl()
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl()
   at System.Windows.Forms.Control.WmShowWindow(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.Form.WmShowWindow(Message& m)
   at System.Windows.Forms.Form.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Edited by: starrysky88 on Sep 13, 2011 11:35 AM

Error while deploying application with TablePopinToggleCell UI element

Hi
I am using NWDS 7.0 and have developed an application with a Table that uses TablePopinToggleCell. When I deploy this on a server (NW2004s), it gives me the following error:
java.lang.NoClassDefFoundError: com.sap.tc.webdynpro.clientserver.uielib.standard.api.IWDTablePopinToggleCell
I am able to deploy the application without the UI element: TablePopinToggleCell
I understand that the class files are not available in the server. How do I fix this problem?
If I should add the required files in the server, where should I add them?
Thanks
Manoj

Hi Manoj,
I have tried doing something like this.
If you want to try this out running on a NW2004s.You need to first download the entire project from perforce branch (
tc\webdynpro\clientserver)for NWDS 7.0 and then build the project locally in your java perspective.
During the local build of the project.It will also point out the dependent projects required by this project(clientserevr).
Once the project is build.
Create seperate external jars of the clientserver project and its dependent projects and save them locally.
Open your SDM manager,pick up this jar file from there and deploy it.
Once the deployment is over, the server is ready to run the application you created.
But this make your NWDS2004s to behave jus like NWDS7.0 .
Just a small suggestion ,instead of going through this tedious process you can shift to NWDS7.0 itself.
regards
aarthi mathivanan

Error on Undeploy: Application with name "crazy" does not exist.

I am working with Jdeveloper Studio Edition Version 11.1.1.6.0 Build JDEVADF_11.1.1.6.0_GENERIC_111205.1733.6192.
I have applications that run fine, however when I click on the undeploy, I get the error below. Please keep in mind that this is a simple sample application -- no security. Just one form with reading an HR schema table. Just a sample to try and figure out why I am getting this error. Any ideas?
1. I have deleted the system folder (repeatedly)
2. I deleted out my entire C:\Users\stuart\AppData\Local\Temp directory (someone mentioned this in another post)
3. Reinstalled Jdeveloper.
Thank you,
Stuart
PS, the application is called crazy because that is what this error is making me!
I have included the start of weblogic too, just in case that sheds some light on this issue.
starting weblogic with Java version:
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b50)
Java HotSpot(TM) Client VM (build 19.1-b02, mixed mode)
Starting WLS with line:
C:\Jdev1116\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Jdev1116\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Jdev1116\wlserver_10.3\server\lib\DemoTrust.jks -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Jdev1116\WLSERV~1.3 -Dwls.home=C:\Jdev1116\WLSERV~1.3\server -Dweblogic.home=C:\Jdev1116\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\Jdev1116\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\Users\stuart\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1 -Djrockit.optfile=C:\Jdev1116\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\Users\stuart\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\Users\stuart\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\Users\stuart\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\stuart\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\Users\stuart\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\Users\stuart\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Jdev1116\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Jdev1116\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\stuart\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Jdev1116\patch_wls1035\profiles\default\sysext_manifest_classpath;C:\Jdev1116\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
<Aug 26, 2012 10:09:26 PM EDT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Aug 26, 2012 10:09:26 PM EDT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Aug 26, 2012 10:09:27 PM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 19.1-b02 from Sun Microsystems Inc.>
<Aug 26, 2012 10:09:27 PM EDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Aug 26, 2012 10:09:29 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Aug 26, 2012 10:09:29 PM EDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Aug 26, 2012 10:09:29 PM EDT> <Notice> <Log Management> <BEA-170019> <The server log file C:\Users\stuart\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<Aug 26, 2012 10:09:39 PM EDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Aug 26, 2012 10:09:45 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Aug 26, 2012 10:09:45 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Aug 26, 2012 10:10:38 PM EDT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Aug 26, 2012 10:10:38 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Aug 26, 2012 10:10:38 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Aug 26, 2012 10:10:38 PM EDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.1.55:7101 for protocols iiop, t3, ldap, snmp, http.>
<Aug 26, 2012 10:10:38 PM EDT> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Aug 26, 2012 10:10:38 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Aug 26, 2012 10:10:38 PM EDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
IntegratedWebLogicServer startup time: 76287 ms.
IntegratedWebLogicServer started.
[Running application crazy on Server Instance IntegratedWebLogicServer...]
[10:10:41 PM] ---- Deployment started. ----
[10:10:41 PM] Target platform is (Weblogic 10.3).
[10:10:42 PM] Retrieving existing application information
[10:10:42 PM] Running dependency analysis...
[10:10:43 PM] Deploying 2 profiles...
[10:10:44 PM] Wrote Web Application Module to C:\Users\stuart\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\o.j2ee\drs\crazy\ViewControllerWebApp.war
[10:10:47 PM] Wrote Enterprise Application Module to C:\Users\stuart\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\o.j2ee\drs\crazy
[10:10:47 PM] Deploying Application...
<Aug 26, 2012 10:10:48 PM EDT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application crazy is not versioned.>
[10:11:15 PM] Application Deployed Successfully.
[10:11:15 PM] The following URL context root(s) were defined and can be used as a starting point to test your application:
[10:11:15 PM] http://stuart-PC:7101/crazy-ViewController-context-root
[10:11:15 PM] Elapsed time for deployment: 34 seconds
[10:11:15 PM] ---- Deployment finished. ----
Run startup time: 34164 ms.
[Application crazy deployed to Server Instance IntegratedWebLogicServer]
Target URL -- http://stuart-PC:7101/crazy-ViewController-context-root/faces/main.jspx
<Aug 26, 2012 10:11:25 PM EDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on 192.168.1.55:52,130 during the configured idle timeout of 5 secs>
<Aug 26, 2012 10:11:25 PM EDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on 192.168.1.55:52,131 during the configured idle timeout of 5 secs>
<Aug 26, 2012 10:11:25 PM EDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on 192.168.1.55:52,132 during the configured idle timeout of 5 secs>
<Aug 26, 2012 10:11:25 PM EDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on 192.168.1.55:52,129 during the configured idle timeout of 5 secs>
[Application termination requested. Undeploying application crazy.]
[10:11:54 PM] ---- Deployment started. ----
[10:11:54 PM] Target platform is (Weblogic 10.3).
[10:11:54 PM] Undeploying Application...
<AppPolicyHandler> <removePolicies> Removal of application policy failed. Reason: {0}.
oracle.security.jps.service.policystore.PolicyObjectNotFoundException: Application with name "crazy" does not exist.
     at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.unsync_getApplicationPolicy(XmlPolicyStore.java:704)
     at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.getApplicationPolicy(XmlPolicyStore.java:673)
     at oracle.security.jps.internal.config.deploy.DeployUtil.removeAppPolicy(DeployUtil.java:253)
     at oracle.security.jps.internal.config.deploy.AppPolicyHandler$2.run(AppPolicyHandler.java:123)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.internal.config.deploy.AppPolicyHandler.removePolicies(AppPolicyHandler.java:118)
     at oracle.security.jps.internal.config.deploy.AppPolicyHandler.handle(AppPolicyHandler.java:69)
     at oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener.callHandler(JpsApplicationLifecycleListener.java:125)
     at oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener.handle(JpsApplicationLifecycleListener.java:106)
     at oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener.postStop(JpsApplicationLifecycleListener.java:145)
     at weblogic.application.internal.flow.BaseLifecycleFlow$PostStopAction.run(BaseLifecycleFlow.java:351)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:199)
     at weblogic.application.internal.flow.BaseLifecycleFlow.postStop(BaseLifecycleFlow.java:95)
     at weblogic.application.internal.flow.HeadLifecycleFlow.unprepare(HeadLifecycleFlow.java:290)
     at weblogic.application.internal.BaseDeployment$1.previous(BaseDeployment.java:619)
     at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:223)
     at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:215)
     at weblogic.application.internal.BaseDeployment.unprepare(BaseDeployment.java:248)
     at weblogic.application.internal.EarDeployment.unprepare(EarDeployment.java:58)
     at weblogic.application.internal.DeploymentStateChecker.unprepare(DeploymentStateChecker.java:205)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.unprepare(AppContainerInvoker.java:117)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.silentUnprepare(AbstractOperation.java:689)
     at weblogic.deploy.internal.targetserver.operations.RemoveOperation.removeDeployment(RemoveOperation.java:313)
     at weblogic.deploy.internal.targetserver.operations.RemoveOperation.doCommit(RemoveOperation.java:114)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
     at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
     at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
[10:11:56 PM] Application Undeployed Successfully.
[10:11:56 PM] Elapsed time for deployment: 2 seconds
[10:11:56 PM] ---- Deployment finished. ----
[Application crazy stopped and undeployed from Server Instance IntegratedWebLogicServer]
Edited by: Stuart Fleming on Aug 26, 2012 7:12 PM

Frank,
Thank you for your answer. I had not checked (will do so tonight).
I had considered it adequate to wipe out the entire system directory (thereby wiping out the integrated weblogic server), but perhaps it was not adequate? I did not specify that this is on the integrated server, but that is the case....
Stuart

Java.lang.NullPointerException in sun code with latest JRE (1.6.0_02)

We upgraded to the latest JRE and when we go to our website which has an unsigned applet and I answer Yes to trust it, the applet never runs.
I turned on debugging in the java console and see this after the certificate negotiation stuff is sent bck and forth:
security: Certificate has failed the verification with the SSL Root CA certificates
security: Invalid certificate from HTTPS server
java.lang.NullPointerException
     at com.sun.deploy.ui.UIFactory.showSecurityDialog(Unknown Source)
     at com.sun.deploy.security.TrustDeciderDialog.showDialog(Unknown Source)
     at com.sun.deploy.security.X509ExtendedDeployTrustManager.checkServerTrusted(Unknown Source)
     at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(Unknown Source)
     at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(Unknown Source)
     at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Unknown Source)
     at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Unknown Source)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(Unknown Source)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(Unknown Source)
     at sun.net.www.protocol.https.HttpsClient.afterConnect(Unknown Source)
     at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
     at sun.plugin.PluginURLJarFileCallBack$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.plugin.PluginURLJarFileCallBack.retrieve(Unknown Source)
     at sun.net.www.protocol.jar.URLJarFile.retrieve(Unknown Source)
     at sun.net.www.protocol.jar.URLJarFile.getJarFile(Unknown Source)
     at sun.net.www.protocol.jar.JarFileFactory.get(Unknown Source)
     at sun.net.www.protocol.jar.JarURLConnection.connect(Unknown Source)
     at sun.plugin.net.protocol.jar.CachedJarURLConnection.connect(Unknown Source)
     at sun.plugin.net.protocol.jar.CachedJarURLConnection.getJarFileInternal(Unknown Source)
     at sun.plugin.net.protocol.jar.CachedJarURLConnection.getJarFile(Unknown Source)
     at sun.misc.URLClassPath$JarLoader.getJarFile(Unknown Source)
     at sun.misc.URLClassPath$JarLoader.access$600(Unknown Source)
     at sun.misc.URLClassPath$JarLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.misc.URLClassPath$JarLoader.ensureOpen(Unknown Source)
     at sun.misc.URLClassPath$JarLoader.<init>(Unknown Source)
     at sun.misc.URLClassPath$3.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.misc.URLClassPath.getLoader(Unknown Source)
     at sun.misc.URLClassPath.getLoader(Unknown Source)
     at sun.misc.URLClassPath.getResource(Unknown Source)
     at java.net.URLClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(Unknown Source)
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
security: Adding certificate in Deployment denied certificate store
security: Added certificate in Deployment denied certificate store
For another person at same IE level and JRE level it works fine and debug for that shows:
security: Certificate has failed the verification with the Internet Explorer ROOT certificates
security: Invalid certificate from HTTPS server
security: Adding certificate in Deployment session certificate store
security: Added certificate in Deployment session certificate store
security: Saving certificates in Deployment session certificate store
security: Saved certificates in Deployment session certificate store
Is there something wrong with the "Deployment session certificate store" in the first instance? Treid un/reinstalling the JRE but it didn;t fix things.

Regenerate what certificate? The applet is unsigned.
Plus other people with the same IE level and same JRE level do not have this problem, which leads me to think it is something specific to this user, like maybe the deployment session certificate store. Is that a file someplace we can like delete to start clean?
Edited by: Jim_does_java on Oct 1, 2007 4:56 AM

Pressing Tab key in IE with latest JRE version

Hi,
I have question about typing "TAB" key in Java Applet in internet explorer with JRE 1.05_08 or above.
When I type any key other than "TAB", the function, processEvent, will be called 3 times to process the events: keyPressed, keyTyped and keyReleased. However, when I type "TAB" key, processEvent is only called once to process the event: keyTyped and the focus goes outside the applet.
Is there any way that the focus won't get lost when typing the "TAB" key?
Note that this problem only happens in IE browser with JRE 1.05_08 or above. It works well in Firefox and netscape with any JRE version and works well in IE with JRE 1.05_06 and below.
The following is my code:
import java.applet.*;
import java.awt.*;
import java.awt.event.*;
public class KeyEventDemo extends Applet implements KeyListener, FocusListener {
     public KeyEventDemo() {
          super();
          addKeyListener(this);
          addFocusListener(this);
     public void keyTyped(KeyEvent e) {
          System.out.println("KEY TYPED: e="+e);
     public void keyPressed(KeyEvent e) {
          System.out.println("KEY PRESSED: e="+e);
     public void keyReleased(KeyEvent e) {
          System.out.println("KEY RELEASED: e="+e);
     public boolean keyDown(Event e, int key) {
          System.out.println("keyDown: e="+e);
          return false;
     public boolean keyUp(Event e, int key) {
          System.out.println("keyUp: e="+e);
          return false;
     public void processEvent(AWTEvent e) {
          System.out.println("processEvent : e="+e);
     public void focusGained(FocusEvent e){System.out.println("FocusGained");}
     public void focusLost(FocusEvent e){System.out.println("FocusLost");}
     public void paint ( Graphics g ){
          this.setBackground ( Color.blue );
     public boolean isFocusTraversable() {
          return true;
     public boolean getFocusTraversalKeysEnabled() {
          return false;
Thanks very much!

I apologize - the cross posting snookered me; the solution is provided on:
http://forum.java.sun.com/thread.jspa?threadID=780250&messageID=4438725#4438725

I have 5updates notifications on my application, but could not download/install. the error messages is application can nto be download this time try again. i have tried severalyy but not installed

I could not installed/download the 5 updates notifcations on my application icon. the error messages is that application can not be download now try again. I have tried it several times but it will not down load.

Keep trying, sometimes they can take a number of attaempts.

My iPhone will not sync with latest itunes download

My iPhone will not sync with latest itunes download

just remove itunes via my control panel
re-downloaded it, install it in a different dir (itunes-2)
did nothing else, clicked on pref and it locked up

Error creating mobile application with dreamweaver cs5.5

I was just looking at the mobile phone application tools in Dreamweaver CS5.5.
I have a new mac, downloaded and installed Dreamweaver CS5.5, installed an update for it, then installed iOS Xcode, and within Dreamweaver attempted to install the Android SDK (this failed using the easy install, so I had to install it manually.
I then followed the tutorial here http://www.adobe.com/devnet/dreamweaver/articles/packaging-web-applications-as-mobile-apps .html
but when I try to package the app, I get the same error every time.
The log produces a lot of information, but I think this is the part that shows the error
/Users/Pat/Documents/DW_NAF/PhoneGapLib/build/PhoneGapLib.build/Debug-iphonesimulator/Phone GapLib.build/Objects-normal/i386/Camera.d -c /Users/Pat/Documents/DW_NAF/PhoneGapLib/Classes/Camera.m -o /Users/Pat/Documents/DW_NAF/PhoneGapLib/build/PhoneGapLib.build/Debug-iphonesimulator/Pho neGapLib.build/Objects-normal/i386/Camera.o
/Users/Pat/Documents/DW_NAF/PhoneGapLib/Classes/Camera.m:178:13: error: type of property 'returnType' ('unsigned int') does not match type of ivar 'returnType' ('enum DestinationType') [3] @synthesize returnType;
             ^
/Users/Pat/Documents/DW_NAF/PhoneGapLib/Classes/Camera.h:25:23: note: ivar is declared here [3]
         enum DestinationType returnType;
                              ^
1 error generated.
operation completed
      emptySelectCount = 9
      readCount = 310
I am not sure if this is the correct place to ask for help, so please forgive me if it is the wrong place.
Any suggestion would really be appreciated.
many thanks
Patch

For the kind of money that Adobe charges, my expectation is that the Adobe software should be of the highest caliber. Wish I had known. I would not have saved for months in order to buy 5.5. I bought Dreamweaver specifically for the mobile piece. I'm disappointed to say the least. I think there is something VERY wrong when users have to supply the fixes and/or search for days or months for help. This is inexcuseable from a software company as well known as Adobe. When I purchase a product that is this costly, I just expect it to work.
Currently, thanks to a fellow Dreamweaver user, I managed to get the Adroid sdk and emulator working early this morning. This after days of searching and thinking that I must be doing something wrong. It had to be me. It couldn't be Adobe.
Come on, having to tweek an internal xml file in order to get the Android emulator to work from Dreamweaver? How many of us could find this fix ourselves?
Xcode is still in limbo giving me the error messages mentioned in this thread. Now it appears that we as users are expected to go in and tweek .h camera files in hopes the fix will work? This is ridiculous. Where is the adobe support and updates to deal with all of this? Seems a little like false advertising to say that mobile apps with compile to code. Steamed? You bet.

Error while accessing application with custom components

Hi experts,
I have an application (HAP_MAIN_DOCUMENT) of component FPM_OIF_COMPONENT which uses a Webdynpro component with the same name (HAP_MAIN_DOCUMENT). This Webdynpro component (HAP_MAIN_DOCUMENT) uses 2 other components (HAP_DOCUMENT_BODY and HAP_DOCUMENT_HEADER).
For my client requirement, i need to create the custom components by copying from standard components as the UI layout changes are quiet huge and not manageable with the enhancements. To accomodate this i have changed the standard configurations by replacing the standard web dynpro components with the custom ones copied. Apart fomr this there are no changes to the standard.
While trying to access the application, i am getting the error as Null object reference. the details of the error is as below. Please advice.
Portal Error
Error when processing your request
What has happened?
The URL http://ddrsap12.dubal.domain:8001/sap/bc/webdynpro/sap/HAP_MAIN_DOCUMENT/ was not called due to an error.
Note
The following error text was processed in the system DSD : Access via 'NULL' object reference not possible.
The error occurred on the application server ddrsap12_DSD_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: WDDOINIT of program /1BCWDY/LUR96POELQNL3TIUWPYS==CP
Method: IF_WDR_VIEW_DELEGATE~WD_DO_INIT of program /1BCWDY/LUR96POELQNL3TIUWPYS==CP
Method: DO_INIT of program CL_WDR_DELEGATING_VIEW========CP
Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
Method: INIT_CONTROLLER of program CL_WDR_VIEW===================CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: GET_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: BIND_ROOT of program CL_WDR_VIEW_MANAGER===========CP
Method: INIT of program CL_WDR_VIEW_MANAGER===========CP
Method: INIT_CONTROLLER of program CL_WDR_INTERFACE_VIEW=========CP
ST22 Dump Analysis
Short text
    Access via 'NULL' object reference not possible.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "/1BCWDY/LUR96POELQNL3TIUWPYS==CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
Information on where terminated
    Termination occurred in the ABAP program "/1BCWDY/LUR96POELQNL3TIUWPYS==CP" -
     in "WDDOINIT".
    The main program was "SAPMHTTP ".
    In the source code you have the termination point in line 4640
    of the (Include) program "/1BCWDY/B_LUXVEOR5WUW66V6QRRNU".
    Termination occurred in a Web Dynpro application
      Web Dynpro Component          ZWD_HAP_DOCUMENT_HEADER
      Web Dynpro Controller         VW_HEADER_MAIN
    The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
    procedure "WDDOINIT" "(METHOD)", but it was neither handled locally nor
     declared
    in the RAISING clause of its signature.
    The procedure is in program "/1BCWDY/LUR96POELQNL3TIUWPYS==CP "; its source
     code begins in line
    4619 of the (Include program "/1BCWDY/B_LUXVEOR5WUW66V6QRRNU ".
Active Calls/Events
No.   Ty.          Program                             Include                             Line
      Name
   33 METHOD       /1BCWDY/LUR96POELQNL3TIUWPYS==CP    /1BCWDY/B_LUXVEOR5WUW66V6QRRNU       4640
      CL_VW_HEADER_MAIN_CTR=>WDDOINIT
      Web Dynpro Component          ZWD_HAP_DOCUMENT_HEADER
      Web Dynpro Controller         VW_HEADER_MAIN
   32 METHOD       /1BCWDY/LUR96POELQNL3TIUWPYS==CP    /1BCWDY/B_LUXVEOR5WUW66V6QRRNU         70
      CLF_VW_HEADER_MAIN_CTR=>IF_WDR_VIEW_DELEGATE~WD_DO_INIT
      Web Dynpro Component          ZWD_HAP_DOCUMENT_HEADER
      Web Dynpro Controller         VW_HEADER_MAIN
   31 METHOD       CL_WDR_DELEGATING_VIEW========CP    CL_WDR_DELEGATING_VIEW========CM003     3
      CL_WDR_DELEGATING_VIEW=>DO_INIT
   30 METHOD       CL_WDR_CONTROLLER=============CP    CL_WDR_CONTROLLER=============CM00Q     3
      CL_WDR_CONTROLLER=>INIT_CONTROLLER
   29 METHOD       CL_WDR_VIEW===================CP    CL_WDR_VIEW===================CM00K     5
      CL_WDR_VIEW=>INIT_CONTROLLER
   28 METHOD       CL_WDR_CONTROLLER=============CP    CL_WDR_CONTROLLER=============CM002     7
      CL_WDR_CONTROLLER=>INIT
   27 METHOD       CL_WDR_VIEW_MANAGER===========CP    CL_WDR_VIEW_MANAGER===========CM008    70
      CL_WDR_VIEW_MANAGER=>GET_VIEW
   26 METHOD       CL_WDR_VIEW_MANAGER===========CP    CL_WDR_VIEW_MANAGER===========CM005    23
      CL_WDR_VIEW_MANAGER=>BIND_ROOT
   25 METHOD       CL_WDR_VIEW_MANAGER===========CP    CL_WDR_VIEW_MANAGER===========CM00B    17
      CL_WDR_VIEW_MANAGER=>INIT
   24 METHOD       CL_WDR_INTERFACE_VIEW=========CP    CL_WDR_INTERFACE_VIEW=========CM004    11
      CL_WDR_INTERFACE_VIEW=>INIT_CONTROLLER
   23 METHOD       CL_WDR_CONTROLLER=============CP    CL_WDR_CONTROLLER=============CM002     7
      CL_WDR_CONTROLLER=>INIT
   22 METHOD       CL_WDR_VIEW_MANAGER===========CP    CL_WDR_VIEW_MANAGER===========CM008    70
      CL_WDR_VIEW_MANAGER=>GET_VIEW
Thanks in advance,
Regards,
Ravi.

Hi ,
How are you able to configure Custom Web dynpro application to Appraisal document instead of HAP_MAIN_DOCUMENT. could you please share the steps. We have created custom application a copy of HAP_MAIN_DOCUMENT and the other two webdynpro components are also copied.
We dont know how to link this to Appraisal template. BADI HRHAP00_BSP_TMPL is used to change application names for BSP application. How to change application name for Web dynpro ABAP. Please share the stpes which will help us
Thanks and Regards,
Kothand

Error while accessing application with the custom components

Hi experts,
I have an application (HAP_MAIN_DOCUMENT) of component FPM_OIF_COMPONENT which uses a Webdynpro component with the same name (HAP_MAIN_DOCUMENT). This Webdynpro component (HAP_MAIN_DOCUMENT) uses 2 other components (HAP_DOCUMENT_BODY and HAP_DOCUMENT_HEADER). For my client requirement, i need to create the custom components by copying from standard components as the UI layout changes are quiet huge and not manageable with the enhancements. To accomodate this i have changed the standard configurations by replacing the standard web dynpro components with the custom ones copied. Apart fomr this there are no changes to the standard.
While trying to access the application, i am getting the error as Null object reference.
the details of the error is as below. Please advice.
Heading 1: h1. P:ortal Error
The URL http://******************/sap/bc/webdynpro/sap/HAP_MAIN_DOCUMENT/ was not called due to an error.
Note
The following error text was processed in the system DSD : Access via 'NULL' object reference not possible.
The error occurred on the application server ddrsap12_DSD_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: WDDOINIT of program /1BCWDY/LUR96POELQNL3TIUWPYS==CP
Method: IF_WDR_VIEW_DELEGATE~WD_DO_INIT of program /1BCWDY/LUR96POELQNL3TIUWPYS==CP
Method: DO_INIT of program CL_WDR_DELEGATING_VIEW========CP
Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
Method: INIT_CONTROLLER of program CL_WDR_VIEW===================CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: GET_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: BIND_ROOT of program CL_WDR_VIEW_MANAGER===========CP
Method: INIT of program CL_WDR_VIEW_MANAGER===========CP
Method: INIT_CONTROLLER of program CL_WDR_INTERFACE_VIEW=========CP
Heading 2: h2. ST22 - Dump Analysis
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
     caught in
    procedure "WDDOINIT" "(METHOD)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component.
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
Information on where terminated
    Termination occurred in the ABAP program "/1BCWDY/LUR96POELQNL3TIUWPYS==CP" -
     in "WDDOINIT".
    The main program was "SAPMHTTP ".
    In the source code you have the termination point in line 4640
    of the (Include) program "/1BCWDY/B_LUXVEOR5WUW66V6QRRNU".
    Termination occurred in a Web Dynpro application
      Web Dynpro Component          ZWD_HAP_DOCUMENT_HEADER
      Web Dynpro Controller         VW_HEADER_MAIN
    The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
    procedure "WDDOINIT" "(METHOD)", but it was neither handled locally nor
     declared
    in the RAISING clause of its signature.
    The procedure is in program "/1BCWDY/LUR96POELQNL3TIUWPYS==CP "; its source
     code begins in line
    4619 of the (Include program "/1BCWDY/B_LUXVEOR5WUW66V6QRRNU ".
Active Calls/Events
No.   Ty.          Program                             Include                             Line
      Name
   33 METHOD       /1BCWDY/LUR96POELQNL3TIUWPYS==CP    /1BCWDY/B_LUXVEOR5WUW66V6QRRNU       4640
      CL_VW_HEADER_MAIN_CTR=>WDDOINIT
      Web Dynpro Component          ZWD_HAP_DOCUMENT_HEADER
      Web Dynpro Controller         VW_HEADER_MAIN
   32 METHOD       /1BCWDY/LUR96POELQNL3TIUWPYS==CP    /1BCWDY/B_LUXVEOR5WUW66V6QRRNU         70
      CLF_VW_HEADER_MAIN_CTR=>IF_WDR_VIEW_DELEGATE~WD_DO_INIT
      Web Dynpro Component          ZWD_HAP_DOCUMENT_HEADER
      Web Dynpro Controller         VW_HEADER_MAIN
   31 METHOD       CL_WDR_DELEGATING_VIEW========CP    CL_WDR_DELEGATING_VIEW========CM003     3
      CL_WDR_DELEGATING_VIEW=>DO_INIT
   30 METHOD       CL_WDR_CONTROLLER=============CP    CL_WDR_CONTROLLER=============CM00Q     3
      CL_WDR_CONTROLLER=>INIT_CONTROLLER
   29 METHOD       CL_WDR_VIEW===================CP    CL_WDR_VIEW===================CM00K     5
      CL_WDR_VIEW=>INIT_CONTROLLER
   28 METHOD       CL_WDR_CONTROLLER=============CP    CL_WDR_CONTROLLER=============CM002     7
      CL_WDR_CONTROLLER=>INIT
   27 METHOD       CL_WDR_VIEW_MANAGER===========CP    CL_WDR_VIEW_MANAGER===========CM008    70
      CL_WDR_VIEW_MANAGER=>GET_VIEW
   26 METHOD       CL_WDR_VIEW_MANAGER===========CP    CL_WDR_VIEW_MANAGER===========CM005    23
      CL_WDR_VIEW_MANAGER=>BIND_ROOT
   25 METHOD       CL_WDR_VIEW_MANAGER===========CP    CL_WDR_VIEW_MANAGER===========CM00B    17
      CL_WDR_VIEW_MANAGER=>INIT
   24 METHOD       CL_WDR_INTERFACE_VIEW=========CP    CL_WDR_INTERFACE_VIEW=========CM004    11
      CL_WDR_INTERFACE_VIEW=>INIT_CONTROLLER
   23 METHOD       CL_WDR_CONTROLLER=============CP    CL_WDR_CONTROLLER=============CM002     7
      CL_WDR_CONTROLLER=>INIT
   22 METHOD       CL_WDR_VIEW_MANAGER===========CP    CL_WDR_VIEW_MANAGER===========CM008    70
      CL_WDR_VIEW_MANAGER=>GET_VIEW
Thanks In advance,
Regards,
Ravi.

Hi, I'm closing this thread and opening the same in another as the content got pasted in reader un friendly format and i'm unable to change the format.
Thanks,
Ravi.

Error while deploying application with WebLogic server

Hi,
I use Jdeveloper 11g and created and ADF application which i want to deploy with WebLogic Server.But i have an error which is :
"There was a failure when processing annotations for application C:\...\xxx.war. Please make sure that the annotations are valid. The error is oracle.adf.library.webapp.ResourceServlet "
Plz help me.
Thx

I am receiving same message for simple servlet. Running JDev11g build 5166 and embedded WLS 10.3. Servlet used to deploy to embedded WLS and ran fine. Recently running newly created servlets produces error message as in this thread.
Investigation turned up the fact that the class file for the servlet was not deployed to the context-root (o.j2ee\drs) on the server. Copying the class file from the mywork project folder to the context-root folder (o.j2ee\drs) permitted the servlet to run.
Don't know if this is the cause of what you are experiencing but it may assist in your investigation! I have not figured out why the class file for servlets does not deploy to server despite the fact that the log file shows war and ear files were deployed. As it turns out, the war file does not have the class file in it so something is wrong before the war file is created.
Cheers!

JFilchooser error on Webstart application with latest JRE download

Similar Messages

Maybe you are looking for