JFileChooser displays annoying "Drive A" message

When I use JFileChooser's showOpenDialog() method with JWS, my app displays a dialog box that says:
"There is no disk in the drive. Please insert a disk into drive A:"
I've tried setting a current directory and I still get the message. How do I get rid of this message?

This is a known bug:
http://developer.java.sun.com/developer/bugParade/bugs/4458949.html
Please vote for it to be fixed!

Similar Messages

Have a Sony Viao E series and get an "imcompatible display driver" error message

Get an "Incompatible Display Driver" error message when attempting to use Adobe Premiere Elements 12 on a Sony Vaio E series laptop.
How to solve this problem?
Thanks

I Googled, and Sony says that is a discontinued model, so I can't find a specification page
Amazon does have a couple models, and BOTH say motherboard integrated Intel graphics adapter
That makes me think the laptop discussed here has Intel AND AMD graphics adapters
To the OP (Original Poster) Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
If YES, read below
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

Annoying 'Network Lost' message keeps on being displayed

My iPad continuously displays a 'network Lost' message when the 3G signal has been lost, even if the WiFi is ok. How can I suppress this? If I am on YouTube for example the message pops up and pauses the clip.

To add to what has been said, if you do not have an unlimited data plan, then it is probably in your best interest to disable cellular data and only enable when you need it. This will prevent apps from accidentally using your limited amount of 3G data. That is what I do. It's a little more inconvenient, but it is comforting to not have to worry about using up my data.

Script not displayed threw driver program

script is not displayed threw driver program i have only one window n one main window n only text in tahat still its not displayed n gives error " Form zasi_sript4 language EN is not active a
no errors". code is below
*& Report ZASI_SRIPT4P
REPORT ZASI_SRIPT4P.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
 FORM = 'zasi_sript4'.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'START_FORM'
EXPORTING
 FORM = 'zasi_sript4'.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
 ELEMENT = 'E1 '
FUNCTION = 'SET'
TYPE = 'BODY'
 WINDOW = 'MAIN'
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
 ELEMENT = 'E2'
FUNCTION = 'SET'
TYPE = 'BODY'
 WINDOW = 'window1'
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
CALL FUNCTION 'END_FORM'
IMPORTING
RESULT = zasi_sript4p.
EXCEPTIONS
 UNOPENED = 1
 BAD_PAGEFORMAT_FOR_PRINT = 2
 SPOOL_ERROR = 3
 CODEPAGE = 4
 OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
OTFDATA =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
CODEPAGE = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Hi,
here you no need to write start form and end form
REPORT ZASI_SRIPT4P.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
FORM = 'zasi_sript4'. " change here
IF SY-SUBRC 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'E1 '
* FUNCTION = 'SET'
* TYPE = 'BODY'
WINDOW = 'MAIN'
IF SY-SUBRC 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'E2'
* FUNCTION = 'SET'
* TYPE = 'BODY'
WINDOW = 'window1' "is this same window or different window? if same window ,give name as 'MAIN'
IF SY-SUBRC 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
CALL FUNCTION 'CLOSE_FORM'
* IMPORTING
* RESULT =
* RDI_RESULT =
** TABLES
** OTFDATA =
** EXCEPTIONS
* UNOPENED = 1
* BAD_PAGEFORMAT_FOR_PRINT = 2
* SEND_ERROR = 3
* SPOOL_ERROR = 4
* CODEPAGE = 5
* OTHERS = 6
IF SY-SUBRC 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
with regards
Naresh

Where can I download Intel (R) Display Audio driver for HP Compaq L2206tm?

Hi,
I am using an Elitebook 820G1 with an external monitor HP Compaq L2206tm.
The monitor is also not showing up in Sounds>Playback as of now.
But when it does show up in Sounds, it can play sound from the laptop.
Problem is sometimes after reboot or wake up from sleep, the monitor drops off from the Sounds panel.
I tried uninstalling Intel (R) display audio driver from Device Manager, and then do a scan for hardware changes to reintall the driver, I get a message "Device driver software was successfully installed."
May I know where can I download Intel (R) display audio driver for HP Compaq L2206tm / Elitebook 820G1?
And what can I do to keep the monitor stay on the Sounds panel?
Please help, I have googled endless with no results.

Thank you Paul.
I'm downloading the driver as I write.
Hopefully HP will update their page and correct the link soon

Imminent hard drive failure message

can i return my laptop to the store for a replacement.. it is less than 5 months old and i am getting an imminent hard drive failure message. totally unacceptable

HP will replace the hard drive under warranty. Not too many stores will permit a return after 5 mos. We can also assist with a hard drive replacement.

I had backed up my I-tunes files to an external hard drive but after my computer crashed when I try to reload from the hard drive the message comes up saying I-tunes library cannot be read because it was created by a newer version. Help please!

I had backed up my I-tunes files to an external hard drive but after my computer crashed and I restored it when I try to reload from the hard drive the message comes up ""I-tunes files cannot be read because it was created by a newer version of I-tunes". Help Please

Upgrade the version of itunes on the new computer
Itunes.com for free download.
Peace

More precise JDBC driver error messages?

Hi,
is there a way to tell the Oracle JDBC driver (9.0.2.3) to provide more detailed error messages in an SQLException message string when a table cannot be found? The usual message "Table or view does not exist" does not provide information on the actual table or view that was missing. I would like the table or view name to be included in the message provided by the SQLException.
(In general I would appreciate more detailed error information in the Oracle JDBC driver exception messages.)
Best regards Uwe

perhaps this might help:
* Get error message of an SQLException with the following form:
* 
* <code>Code=<Vendor-specific error code>:'<error message>':SQLState=<SQLState></code>
* <code>
* Note: SQLState "S1000" is returned for general errors or if driver does not support SQLState.
* @param sqlException SQLException to create error code from.
* @return Specific error message or null if sqlException not available.
public static String toString(SQLException sqlException) {
String result = null;
if (sqlException != null) {
StringBuffer sb = new StringBuffer();
while (sqlException != null) {
sb.append("RDBMS Vendor Code ");
sb.append(sqlException.getErrorCode());
sb.append(": \"");
sb.append(sqlException.getMessage());
sb.append("\" : SQLState=");
sb.append(sqlException.getSQLState());
sqlException = sqlException.getNextException();
result = sb.toString();
}//else: input unavailable
return result;
}//toString()
 * Get string representation of a SQLWarning.
 * @param sqlWarning
 * @return Specific error message or null if sqlWarning not available.
 public static String toString(SQLWarning sqlWarning) {
String result = null;
if (sqlWarning != null) {
StringBuffer sb = new StringBuffer();
while (sqlWarning != null) {
sb.append("errorCode=");
sb.append(sqlWarning.getErrorCode());
sb.append(", SQLState=");
sb.append(sqlWarning.getSQLState());
sb.append(",message=");
sb.append(sqlWarning.getMessage());
sb.append(",cause=");
sb.append(sqlWarning.getCause());
sb.append(";");
sqlWarning = sqlWarning.getNextWarning();
}//next subsequent warning
}//else: input unavailable
return result;
}//toString()

How do i recover data from an external hard drive that was accidentally deleted? After I verified the drive, a message appeared that said my drive needed to be repaired. When I tried to access the drive again, the 700 Gigs of music is gone!

How do i recover data from an external hard drive that was accidentally deleted? After I verified the drive, a message appeared that said my drive needed to be repaired. When I tried to access the drive again, the 700 Gigs of music is gone!

Stop using the drive immediately, un plug it.
Buy a copy of ProSoft DataRescue 4 and use it to search for deleted files.

I own fully paid for license for Dreamweaver CS6. Every time I click to open the app, I get a very annoying pop-up message. How do I stop it?

I own fully paid for license for a Mac version of Dreamweaver cs6. Every time I click to open the app, and before I can start using CS6, I get a very annoying pop-up message (see screen shot below) that states I have a trial version and do I want to buy into the cloud version, which I don't. How do I stop the pop-up? This message seems to originate from the Extension Manager.
I tried trashing Extension Manager, but another annoying pops-up which states that I have to "reinstall the application manager". Of course, there is no such thing as a "application manager" that I can find. I guess it should be "extension manager".
I no longer own Photoshop because there are so many great alternatives available. Can't wait to do the same with Dreamweaver.
Adobe can't even get the correct cost. I'm an US Customer however they quote the Creative Cloud in Euros. Go figure........

I have faced this problem in the past. In my case, I had Adobe registered under two separate ID. One when a student and the second as a regular employed individual. Because I purchased the licensed while at the University, the registration was listed under the school id. So, when I login in Adobe using my regular ID, I then received the annoying marketing campaign add.
Therefore, review that you have enter the correct id during loging. IT is possible that you login to the community as one ID but purchased the subscription using a separate user name. In these cases, the computer will not know that you already have a paying license.

To display a continuos Error Message using BADI

Hi Everybody,
 There's a transaction that makes use of classes and interfaces to display an ALV grid with input enabled frames and fields. There's a need to display an error message using a specified BADI method, which gets triggered after the user enters the input. The error message is working fine for the first time.But when i'm trying to enter the same input and press enter after the error message, the transaction is getting closed. How can i display the same error message, until and unless the user enters the correct input ? I've tried to trace the control using the debugger after the enter is pressed, but the debugger is also getting closed and the control is coming out of the transaction. Help me out in displaying the error message.

Hi,
Open the interface and go to the Methods tab.
Select the Method and click on Parameters.
In the method parameters, declare a variable
RETURN Changing Type ALM_ME_BAPIRET2_T.
Now, inside your code, declare DATA : ls_return TYPE bapiret2.
and populate this RETURN table, something like:
 if not ( wa_mara-mtart eq 'SPAR' or wa_mara-mtart eq 'ZMRO' ).
 CLEAR ls_return.
 MOVE 'E' TO ls_return-type.
 MOVE 'ERR_MESSAGE' TO ls_return-id.
 MOVE '999' TO ls_return-number.
 MOVE 'Enter proper error message here' TO ls_return-message.
 INSERT ls_return INTO TABLE return.
 endif.
Then, back in your program, check if this table is empty proceed otherwise, STOP or EXIT.
Regards
Subramanian

How do I display the number of messages in a message folder under version 3.1.2?

I want to display the number of messages (read and unread) next to the folder name as in my previous version.
I used to go to Tools...Options...Advanced...General Tab and check "Show expanded columns in the folder pane".

Read the Release Notes for Thunderbird, that issue is covered. Scroll down to "Known Issues", "All Systems", second paragraph: https://support.mozilla.com/en-US/questions/748278
As Quarantine said, alway post to Thunderbird questions to one of the 2 forums that he listed in his response.

I have a problem in loading programs And display my me Hazh message (Plase contact itunes support to complete this transaction)

I have a problem in loading programs
And display my me Hazh message
(Plase contact itunes support to complete this transaction)

You need to contact iTunes Support. There is a "Contact Us" link at the bottom right of every page of the forums.
Best of luck.

Why does the display name in older messages change if I update my address book for that E-mail address?

I have recently installed Thunderbird 24.5.0 after upgrading a WinXP machine to Win7. I have discovered a strange problem with older mail that was imported from Outlook Express 6.
The pastor of my church uses a generic E-mail address <[email protected]>. This address belongs to the position, not to an individual. We recently had a new pastor come to the church, and I updated my entry for this E-mail address to reflect the new person's name. This is fine for new mail sent since the new person arrived, but Thunderbird has also applied the new name to older mail from the previous pastor. This is very confusing, since the current pastor could not have sent mail from that address prior to her start date.
How can I get Thunderbird to stop changing the Display Name in archival messages that were sent by the previous pastor prior to September 01, 2013? I have not encountered this situation before using Netscape 4.x Mail, Outlook Express 6, and Windows Mail (Vista version).

Of course it does. It looks for a match between the sender's email address and a Contact in your address book. You've edited the Display Name for this account so it gets applied to any message with that email address if that's how your Address Book is configured.
In the Contact card for this address, you can tell it whether or not to use the "real" email address within the message, or the Display Name from your Address Book. Telling it to use the name found in the message ''might'' resolve this, but it depends on how the sender has formatted it. If he includes his name then Thunderbird should be able to resolve it, and you just add both configurations to your Address Book as two separate Contacts, rather than modifying the existing entry.
However, in this situation you're using the same email address for two distinct people, so Thunderbird may not be able to know who sent the old messages. If both have sent using "rector@stpeterscobourg.org" without any personalization then Thunderbird won't be able to differentiate between them.
I have to say that I haven't recently tried using different display names with the same email address, so I don't know for sure if TB can use the display name constructively. If there's nothing in the old messages to tell you which sender wrote them, then TB can't do anything about it.

How to check if the user has only the display authority of a message

hi,
How to check if the user has only the display authority of a message but does not have the change authority for a certain message?
Best regards,

hi blake
though i am an application consultant and for authorisation u need to have help of BASIS person if u r not the one but still i can guide u regarding the same,
Basically Authorization Management
Use
You can use the following authorization objects to control the authorizations for maintaining business partner data:
        Authorization objects for the Business Partner:
             B_BUPA_GRP
             B_BUPA_ATT
             B_BUPA_FDG
             B_BUPA_RLT
Authorization objects for relationships:
             B_BUPR_BZT
             B_BUPR_FDG
In addition, you can assign an authorization group to a business partner in the dialog. The authorization group controls which users may maintain data for this business partner.
You can also define authorizations for fields and field groups using the Business Data Toolset (BDT). Depending on the settings you have made, the system carries out the relevant authorization checks.
In the dialog in the SAP GUI, you can display an overview of the authorizations assigned to you by pressing the button Settings.
For more information on authorization management, see the Implementation Guide (IMG) of the Business Partner, as well as in the Developers Handbook for the BDT under Authorizations.
IntegrationAuthorization management for the Business Partner forms part of the SAP authorization concept.
Prerequisites
You have made the necessary settings in Customizing of the Business Partner under Basic Settings--> -Address Management.
Moving over
AS ABAP Authorization Concept
The ABAP authorization concept protects transactions, programs, and services in SAP systems from unauthorized access. On the basis of the authorization concept, the administrator assigns authorizations to the users that determine which actions a user can execute in the SAP system, after he or she has logged on to the system and authenticated himself or herself.
To access business objects or execute SAP transactions, a user requires corresponding authorizations, as business objects or transactions are protected by authorization objects. The authorizations represent instances of generic authorization objects and are defined depending on the activity and responsibilities of the employee. The authorizations are combined in an authorization profile that is associated with a role. The user administrators then assign the corresponding roles using the user master record, so that the user can use the appropriate transactions for his or her tasks.
Authorization Checks
To ensure that a user has the appropriate authorizations when he or she performs an action, users are subject to authorization checks.
The following actions are subject to authorization checks that are performed before the start of a program or table maintenance and which the SAP applications cannot avoid:
        Starting SAP transactions (authorization object S_TCODE)
        Starting reports (authorization object S_PROGRAM)
        Calling RFC function modules (authorization object S_RFC)
        Table maintenance with generic tools (S_TABU_DIS)
Checking at Program Level with AUTHORITY-CHECK
Applications use the ABAP statement AUTHORITY-CHECK, which is inserted in the source code of the program, to check whether users have the appropriate authorization and whether these authorizations are suitably defined; that is, whether the user administrator has assigned the values required for the fields by the programmer. In this way, you can also protect transactions that are called indirectly by other programs.
AUTHORITY-CHECK searches profiles specified in the user master record to see whether the user has authorization for the authorization object specified in the AUTHORITY-CHECK. If one of the authorizations found matches the required values, the check is successful.
Starting SAP Transactions
When a user starts a transaction, the system performs the following checks:
        The system checks in table TSTC whether the transaction code is valid and whether the system administrator has locked the transaction.
        The system then checks whether the user has authorization to start the transaction.
The SAP system performs the authorization checks every time a user starts a transaction from the menu or by entering a command. Indirectly called transactions are not included in this authorization check. For more complex transactions, which call other transactions, there are additional authorization checks.
             The authorization object S_TCODE (transaction start) contains the field TCD (transaction code). The user must have an authorization with a value for the selected transaction code.
             If an additional authorization is entered using transaction SE93 for the transaction to be started, the user also requires the suitable defined authorization object (TSTA, table TSTCA).
If you create a transaction in transaction SE93, you can assign an additional authorization to this transaction. This is useful, if you want to be able to protect a transaction with a separate authorization. If this is not the case, you should consider using other methods to protect the transaction (such as AUTHORITY-CHECK at program level).
        The system checks whether the transaction code is assigned an authorization object. If so, a check is made that the user has authorization for this authorization object.
The check is not performed in the following cases:
You have deactivated the check of the authorization objects for the transaction (with transaction SU24) using check indicators, that is, you have removed an authorization object entered using transaction SE93. You cannot deactivate the check for objects from the SAP NetWeaver and HR areas.
This can be useful, as a large number of authorization objects are often checked when transactions are executed, since the transaction calls other work areas in the background. In order for these checks to be executed successfully, the user in question must have the appropriate authorizations. This results in some users having more authorization than they strictly need. It also leads to an increased maintenance workload. You can therefore deactivate authorization checks of this type in a targeted manner using transaction SU24.
             You have globally deactivated authorization objects for all transactions with transaction SU24 or transaction SU25.
             So that the entries that you have made with transactions SU24 and SU25 become effective, you must set the profile parameter AUTH/NO_CHECK_IN_SOME_CASES to Y (using transaction RZ10).
All of the above checks must be successful so that the user can start the transaction. Otherwise, the transaction is not called and the system displays an appropriate message.
Starting Report Classes
You can perform additional authorization checks by assigning reports to authorization classes (using report RSCSAUTH). You can, for example, assign all PA* reports to an authorization class for PA (such as PAxxx). If a user wants to start a PA report, he or she requires the appropriate authorization to execute reports in this class.
We do not deliver any predefined report classes. You must decide yourself which reports you want to protect in this way. You can also enter the authorization classes for reports with the maintenance functions for report trees. This method provides a hierarchical approach for assigning authorizations for reports. You can, for example, assign an authorization class to a report node, meaning that all reports at this node automatically belong to this class. This means that you have a more transparent overview of the authorization classes to which the various reports are transported.
You must consider the following:
              After you have assigned reports to authorization classes or have changed assignments, you may have to adjust objects in your authorization concept (such as roles (activity groups), profiles, or user master records).
              There are certain system reports that you cannot assign to any authorization class. These include:
              RSRZLLG0
              STARTMEN (as of SAP R/3 4.0)
              Reports that are called using SUBMIT in a customer exit at logon (such as SUSR0001, ZXUSRU01).
              Authorization assignments for reports are overwritten during an upgrade. After an upgrade, you must therefore restore your customer-specific report authorizations.
Calling RFC Function Modules
When RFC function modules are called by an RFC client program or another system, an authorization check is performed for the authorization object S_RFC in the called system. This check uses the name of the function group to which the function module belongs. You can deactivate this check with parameter auth/rfc_authority_check.
Checking Assignment of Authorization Groups to Tables
You can also assign authorization groups to tables to avoid users accessing tables using general access tools (such as transaction SE16). A user requires not only authorization to execute the tool, but must also have authorization to be permitted to access tables with the relevant group assignments. For this case, we deliver tables with predefined assignments to authorization groups. The assignments are defined in table TDDAT; the checked authorization object is S_TABU_DIS.
You can assign a table to authorization group Z000. (Use transaction SM30 for table TDDAT) A user that wants to access this table must have authorization object S_TABU_DIS in his or her profile with the value Z000 in the field DICBERCLS (authorization group for ABAP Dictionary objects).
please See also:
        SAP Notes 7642, 20534, 23342, 33154, and 67766
guess this info will help you,there is one graphic which actually explain the hierarchy of authorisation,i will find some time out to let u know more info about the authorisation
but if u sit with ur BASIS guy then u can learn lot of things in PFCG
i guess u r a basis guy,then its not a problem
best regards
ashish

JFileChooser displays annoying "Drive A" message

Similar Messages

Maybe you are looking for