JFIleChooser set default name

Why is that if I do
chooser.setSelectedFile(something)
everytime I change the directory the file name is replaced by the current working directory?
I wanna set the name that stays there until the user explicitly decides otherwise.
How can I make it that the file name stays?

I have noticed this bug in older versions of Swing. Use JDK 1.3 or above to fix this problem.
-Andrew

Similar Messages

ExprHow to set default name for Express VI

I have created an express and when I drag drop the express in block diagram, I am getting a name "A1". What should I do to set a default name (for example "B") for my express VI? I tried updating the Window title properties of the source VI.
Thanks in advance.
Regards,
Satish

Hello diademi!
Select the menu 'Einstellungen' / 'Optionen' / 'Allgemeines...'. You get the dialog 'Allgemeine Einstellungen'. Click on the button 'Kompatibilität...'. In the dialog 'Kompatibilität' you have the flag 'Sprachunabhängige Ergebniskanalnamen in ANALYSIS' where you can set the behaviour. If you press Ctrl+A and paste in a text editor you can see that it is variable CompResChnNaming.
Matthias
Matthias Alleweldt
Project Engineer / Projektingenieur
Twigeater?

JFileChooser : Settig default name in text box

I am writing an FTP program that allows users to send files across different computers. On recieving a file I want the application provide the user with the option of saving the file where the user wants. I have used a JFileChooser's saveDialogBox for that. I want to set the default text in the saveDialogBox TextField with the file name that the application has recieved. How can this be done. Please help. Any help is welcome.

So much for learning to read the API...Sorry I had not seen your reply yet :o)
Besides, it took me a try in <favorite IDE> to check, it was not obvious to me that it would work in the "save" dialog type, especially when the physical does not exist yet (once again baffled by the fact that java.io.File does not denote a genuine file but merely a virtual file path).

Set default name of document before save

I have created a "save as" button on a form.
When the user presses the button (e.g., mouse up) I want the save as dialog box to appear with a NEW programmatically defined file name to appear. (NOT the existing file name).
The block comes because saveAs is a restricted method.
Any clues how to accomplish this seemingly simple task?

If you didn't mind some extra steps for the user, you could accomplish much the same thing by creating a dialog asking if the user wants to save the file named with the current date (as above).
Then if they wanted the file to be saved, you could ask them to navigate using app.browseForDoc ({ bSave: true}), and save using the returned cPath and your new filename.
Not quite a true save-as dialog, but you can get the file where the user wants it, and with the name you want to give.
Or if you want to save it in the same folder as the current document, just do doc.saveAs({ cPath: this.path })
Darryl

How to set group name as default value in People Picker in Infopath 2010

How to set group name (shareoint Groupname) as default value in People Picker in Infopath 2010

Under the Developer tab in Infopath you can manage Loading Events, unfortunetly i dont have Visual Studio on this PC so i cant laborate, but i believe it's rather simple to figure out.
Edit: Found a easier way, through Data > Default Values.

Default name appearing in new account set up for apple mail

When I set up a new mail account in os 10.4.11 the default name is my old last name. How do I make it permanently default to my new last name?

Hi Patty,
Open Address Book & Edit your listing there... at least it looks like that is where it gets it from.

How to set the default name when exporting a report ?

I use crystal reports in my C# asp application, with the CrystalReportViewer class. When the end user exports the reports by clicking on the toolbar button, the "save as" dialog box appears, with default name "_viewer.pdf" or "_viewer.xls" etc. "_viewer" being the CrystalReportViewer's instance name. Has anyone an idea to change this default name ? The end user would like at least the report name. Thanks

I looked around and I it appears that you have found the only way to set this.Â There doesn't seem to be dynamic support for the exported file names.
Rob Horne
http://diamond.businessobjects.com/blog/10

How to Set default value for taxonomywebtagging control with terms and nested terms

Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.

Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

Any opinions on setting default values on Business Partner level?

Hi All,
I do not have a question, but would like to have a good discussion on how you should preferably be setting default values on a business partner and it's assignment blocks.
In my opinion you have two main alternatives:
1. The "old fashioned" way by using the get_<attribute_name> method and doing some checks for the perticular attribute in the context node.
2. Using the Badi BADI_CRM_BP_UIU_DEFAULTS to fill fields with a default value. With some enhancements on the assignment blocks (making typed_context attribute public and, when not called yet, calling the badi) you can use the badi for all assignment blocks.
Because I discovered via debugging that in the, by many forums suggested, badi code a programm error/exception is used so that the default values are only set during creation mode, I started doubting to use the badi. Because once I had set my data declarations to the right references and the exception did not occur anymore, suddenly it always fills the values even when there are already values filled. So additional checks are needed to assure that I am in creation mode.
Although I like the use of the badi, because all my default values on the whole business partner object can be found in the same place, it is getting a bit strange to: first still enhance the view and context node class, adjust the visibility of the typed_context, call the badi and do all kind of checks to assure that you are in the right view/context node, where this all is faster and more lean and mean when done directly in the get_<attribute_name> method on a context node.
Anyone who wants to give there opinion on this?
Regards,
Martijn.

Cameron,
Unfortunately you cannot pass the Account and Contact name before saving the record. Post default tries to capture the name just before the record gets saved, but as the record is yet to be created, the relationship wont exist and only the respective id fields will have values. If you try using account id/ contact id it will work else just pass the time stamp in the name field which will make sure there is some value when the record is saved. later in the back end you might need WS to update the field values.

Set Default Sort in File Manager

Hi,
When i go to File Manager, Media Card, Photos, the default "sort" is set to Name and "order" Ascending. If i want to change it to "sort" date and "order" descending, i select date and then it jumps back to the actual pictures. I have to go back into the menu to do the second selection "sort" descending". So can the development team create an option where you change all the settings first and then you save them which then brings you back to the actual pictures? And also look into the option of remembering your preferred sort/order preferences? because once you go out of file manager and go back in, you have to do these steps again.
if I am overlooking this feature (maybe it's already a setting somewhere which i missed) feel free te let me know.
Thanks

Hi,
It's not about set of key field in MDM Import Manager but the reason is that you can not select more than 1 category(Lookup Taxonomy) in maintable for one record. thats why error is coming because for this Property Multi-valued always No.
Even, you can try this in Data Manager manually create three Category A, B and C in taxonomy mode on selecting Sub table Categories, then on selecting main table, when you select category field(which is lookup to categories table)for a particular record you could able to select only one category A, B or C.
i would suggest make a Attribute of type text having three values A, B and C and mark this as Multi-Valued in Attribute Detail and link this Attribute with your category. in this way you can attach three values A, B and C with your Record.
Other thing you can do,make this category field as (Lookup Hierarchy not lookup taxonomy) in main table to Subtable(Hierarchy) then for this field in main table you can set Property Multi-valued = Yes in MDM console and then after Import using MDM Import Manager finally only one record will get created in Data Manager as:
Name Category
1 A;B;C
Hope it will Help you,
Rewards if Useful.....
Mandeep Saini
Edited by: Mandeep Saini on Jun 20, 2008 8:46 AM

Set Document Name

Hi guys
I'm using VS + C# for my Add-on
I create my new document by this code:
Document myDocument = myVisioApplication.Documents.Add("MyTemplateFile.vst");
and it create new document for me but the default name of this document is Drawing1.vsdx , Drawing2.vsdx , ....
How can I set another name for that without saving?
Regards
Danesh

You can't, the document name is a read-only attribute, it is set by saving the file.
Paul Herber, Sandrila Ltd. Engineering and software shapes for Visio
Sandrila Ltd

Set Default Printer based on user setting using Powershell script

Hi
I would like to create a script that runs on user log off and captures the default printer (set manually by the user) and then another script to reapply the settings (saved upon log off) when the user logs back in.
This is because local printers are set as default printer (PDF Creator Programs) when we all use Network Printers so this means a user has to set default printer to the network printer all the time.
I have found this script to start with:
$Printer = Get-WmiObject -namespace root\cimv2 -Query “select * from Win32_Printer Where Default = TRUE” -Impersonation 3 | select name | out-file C:\temp\Printer.txt
But the out file looks like this:
name
\\PrinterserverName\Accounts01
Which I dont see how it can be used on another script plus there are spaces after\Account01
Any Ideas please?
M
Maelito

Hi Maelito,
According to your description, you want to export the default printer name to text file, then read this printer name from text file and set the default printer via Powershell:
#save printer name to text file
Get-WmiObject -namespace root\cimv2 -Query “select * from Win32_Printer Where Default = TRUE” -Impersonation 3 | select -ExpandProperty name | out-file C:\temp\Printer.txt
# read printer name from text file and set default printer
$name=get-content C:\temp\Printer.txt
(Get-WmiObject -Class Win32_Printer -Filter "Name='$name'").SetDefaultPrinter()
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to dynamically set the name of the generated PDF file sent by email

Hello,
I am using Reports 10g and I managed to send PDF reports by email, specifying the recipient, subject, format etc, using the reports servlet URL.
But there is one thing that I cannot find a way to do: I want to dynamically set the name of the attached file. It defaults to the name of the RDF file (eg monthly_sales.pdf). I would like it to be something more meaningful (eg monthly_sales_072010.pdf, where 072010 is the month and year passed by parameters).
Is it possible to do it?
Thanks
Luis

Use System.load(...) instead of System.loadLibrary(...).

Account set default in report

Hi Gurus,
I copied an income statement report and defined a new set and new variable for the report to default in - in my case - balance sheet accounts. I defined the set thus:
Set name: BALA
Table: GLPCT
Set type: Basic set
Field name:RACCT
I then created a variable BALA defined as:
Table: GLPCT
Field Name: RACCT
Default entries: All Values
Entry fields on selection screen:: Set and value entry
Why does this set not give me any values?
Regards

In the variable definition, change the default entries to "Default Set" and give set name there. Then when you use this variable, it should default show the set name in the field.
Hope it helps.
Thanks.
Rahul

JFIleChooser set default name

Similar Messages

Maybe you are looking for