[JGSS] AP_REQ token id does not match! while acceptSecContext

I am try to use Java jgss as server side program to accept c++ client on windows xp and the security mechanism is Kerberos V5 then i got these exception messgae:
Defective token detected (Mechanism level: AP_REQ token id does
not match!)
what is the possible problem ?

Any suggestions?

Similar Messages

An Attempt was made to reference a token that does not exist - SAPB1 8.8

Dear All,
System throws an error message as "An Attempt was made to reference a token that does not exist" while connecting Add-on in Client system in SAP Business 8.8 version
Please do the needful
Thanks & Regards
Venkatesh N

Hi Venkatesh N,
Are you got any solution for this issue?
I also face a same problem with you. I got the a reply is "Reinstall the application".
But this is not the main solution for the problem.
If you got any solution, hope you can share with me.
Thank you.
regards,
Sheon

The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.

I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
Thanks,
Venu S.
Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!

Hi Venu S,
Based on my research, you might encounter a known issue, please try the hotfix in this KB:
http://support.microsoft.com/kb/928385
Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
The version of Windows Server you are using
The result of SELECT @@VERSION
The scenario when you get this error
If anything is unclear, please let me know.
Regards,
Tom Li

Incoming Oracle-Auth-Token does not match

<Aug 15, 2012 2:27:36 PM SGT> <Error> <oracle.portal.page> <BEA-000000> <Unexpected exception in servlet
java.lang.IllegalStateException: Incoming Oracle-Auth-Token does not match.
     at oracle.webdb.page.PageBuilder.processUMDRequest(Unknown Source)
     at oracle.webdb.page.PageBuilder.process(Unknown Source)
     at oracle.webdb.page.Main.doRequest(Unknown Source)
     at oracle.webdb.page.ParallelServlet.doGet(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:184)
     at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:526)
     at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:253)
     at oracle.webdb.portal.servlet.PortalServlet.doGet(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
Anyone know the cause of the error?

Try the My Oracle Support search functionality - this will get you to Note [url https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=1075472.1]1075472.1, "XML Parsing Error: Syntax Error, Line Number 1, Column 1" and "Oracle-Auth-Token Does Not Match Error" When Accessing Portal 11g.
Thanks,
EJ

While configuring speed 1000 i am getting error as sw2-storage-vdc(config-if)# speed 1000 ERROR: Ethernet2/6: Configuration does not match the port capability.

storage-vdc(config-if)# show module
Mod Ports Module-Type                         Model              Status
2    32     1/10 Gbps Ethernet Module           N7K-F132XP-15      ok
sw1-gd78(config-if)# sh module
Mod Ports Module-Type                         Model              Status
2    48     1/2/4/8 Gbps FC Module              DS-X9248-96K9      ok
4    8      10 Gbps FCoE Module                 DS-X9708-K9        ok
7    0      Supervisor/Fabric-2a                DS-X9530-SF2AK9    active *
8    0      Supervisor/Fabric-2a                DS-X9530-SF2AK9    ha-standby
10   22     4x1GE IPS, 18x1/2/4Gbps FC Module   DS-X9304-18K9      ok
Mod Sw              Hw      World-Wide-Name(s) (WWN)
2    5.2(2)          1.1     20:41:00:0d:ec:fb:8a:00 to 20:70:00:0d:ec:fb:8a:00
4    5.2(2)          0.107   --
7    5.2(2)          1.8     --
8    5.2(2)          1.8     --
10   5.2(2)          1.3     22:41:00:0d:ec:fb:8a:00 to 22:52:00:0d:ec:fb:8a:00
sw1-gd78(config-if)# sh run int ethernet4/6
!Command: show running-config interface Ethernet4/6
!Time: Mon Feb 20 22:56:12 2012
version 5.2(2)
interface Ethernet4/6
no shutdown
sw1-gd78(config-if)# no shut
sw1-gd78(config-if)# speed 1000
ERROR: Ethernet4/6: Configuration does not match the port capability.
sw1-gd72# sh int ethernet4/6 capabilities
Ethernet4/6
Model:                 DS-X9708-K9
Type (SFP capable):    10Gbase-SR
Speed:                 1000,10000
Duplex:                full
Trunk encap. type:     802.1Q
Channel:               yes
Broadcast suppression: percentage(0-100)
Flowcontrol:           rx-(off/on/desired),tx-(off/on/desired)
Rate mode:             dedicated
QOS scheduling:        rx-(2q4t),tx-(1p3q4t)
CoS rewrite:           yes
ToS rewrite:           yes
SPAN:                  yes
UDLD:                  yes
Link Debounce:         yes
Link Debounce Time:    yes
MDIX:                  no
Port Group Members:    none
TDR capable:           no
FabricPath capable:    yes
Port mode:             Switched
sw1-gd72# sh int ethernet4/6 transceiver details
Ethernet4/6
    transceiver is present
    type is 10Gbase-SR
    name is CISCO-FINISAR
    part number is FTLX8571D3BCL-CS
    revision is C
    serial number is FNS12090EMJ
    nominal bitrate is 10300 MBit/sec
    Link length supported for 50/125um OM2 fiber is 82 m
    Link length supported for 50/125um OM3 fiber is 300 m
    Link length supported for 62.5/125um fiber is 26 m
    cisco id is --
    cisco extended id number is 4
           SFP Detail Diagnostics Information (internal calibration)
                                     Alarms                  Warnings
                                High        Low         High          Low
Temperature   36.21 C        75.00 C     -5.00 C     70.00 C        0.00 C
Voltage        3.29 V         3.63 V      2.97 V      3.46 V        3.13 V
Current        8.11 mA       11.80 mA     4.00 mA    10.80 mA       5.00 mA
Tx Power       -2.65 dBm       1.49 dBm -11.30 dBm   -1.50 dBm     -7.30 dBm
Rx Power       -2.21 dBm       1.99 dBm -13.97 dBm   -1.00 dBm     -9.91 dBm
Transmit Fault Count = 0
Note: ++ high-alarm; + high-warning; -- low-alarm; - low-warning

Ankit,
You are trying to set speed 1000 on a 10g sfp.
type is 10Gbase-SR
You will need to insert a 1gig sfp and then you will be able to set the speed.
Also, I noticed that you posted first with interface 2/6 and the output you gave me was for 4/6. Are you sure you're in the right interface?

Error while trying to install NI-VISA driver on SUSE LINUX 11.1(The version of gcc in the path does not match the version of gcc used to compile the currently running kernel.)

hi i am trying to install NI-VISA driver on SUSE LINUX 11.1.
the error message it shows is
******************************** ERROR ****************************************
* The version of gcc in the path does not match the version of gcc used to    *
* compile the currently running kernel. This can cause unpredictable         *
* behavior in kernel drivers and should be fixed.                             *
* gcc version: Linux)                                                          *
* kernel compiled with: 4.3.2                                                 *
******************************** ERROR ****************************************
my kernel source version is
linux-8nes:/home/admin # rpm -qi kernel-source
Name        : kernel-source                Relocations: /usr/src
Version     : 2.6.27.29                         Vendor: openSUSE
Release     : 0.1.1                         Build Date: Sun 16 Aug 2009 03:43:52 PM IST
Install Date: Sat 24 Oct 2009 02:13:12 AM IST      Build Host: rinck
Group       : Development/Sources           Source RPM: kernel-source-2.6.27.29-0.1.1.src.rpm
Size        : 309251954                        License: GPL v2 only
Signature   : RSA/8, Sun 16 Aug 2009 03:57:25 PM IST, Key ID b88b2fd43dbdc284
Packager    : http://bugs.opensuse.org
URL         : http://www.kernel.org/
Summary     : The Linux Kernel Sources
Description :
Linux kernel sources with many fixes and improvements.
Authors:
    Linus Torvalds <[email protected]>
    see /usr/src/linux/CREDITS for more details.
Source Timestamp: 2009-08-15 17:53:59 +0200
GIT Revision: 8a413546901c407e96f7fba18574cceeb40452af
GIT Branch: SLE11_BRANCH
Distribution: openSUSE 11.1
i had also installed GCC 4.3.2.
it shows the error message as i had posted.
please kindly help me on this.
Thanks and regards,
P.karthick

Check this solution

Any idea what this errorr means? the data type of the reference does not match the data type of the variable

I am using Veristand 2014, Scan Engine and EtherCat Custom Device. I have not had this error before, but I was trying to deploy my System Definition File (run) to the Target (cRio 9024 with 6 modules) and it failed. It wouldn't even try to communicate with the target. I get the 'connection refused' error.
I created a new Veristand project
I added the Scan Engine and EtherCat custom device.
I changed the IP address and auto-detected my modules
i noticed tat Veristand didn't find one of my modules that was there earlier. (this week)
So, i went to NiMax to make sure software was installed and even reinstalled Scan Engine and Veristand just to make sure.
Now, it finds the module, but when i go to deploy it getsto the last step of deploying the code to the target, and then it fails.
Any thoughts?
Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Preparing to synchronize with targets...
• Querying the active System Definition file from the targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.
• Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Preparing to deploy the System Definition to the targets...
• Compiling the System Definition file...
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Sending reset command to all targets...
• Preparing to deploy files to the targets...
• Starting download for target Controller...
• Opening FTP session to IP 10.12.0.48...
• Processing Action on Deploy VIs...
• Setting target scan rate to 10000 (uSec)... Done.
• Gathering target dependency files...
• Downloading testChassis.nivssdf [92 kB] (file 1 of 4)
• Downloading testChassis_Controller.nivsdat [204 kB] (file 2 of 4)
• Downloading CalibrationData.nivscal [0 kB] (file 3 of 4)
• Downloading testChassis_Controller.nivsparam [0 kB] (file 4 of 4)
• Closing FTP session...
• Files successfully deployed to the targets.
• Starting deployment group 1...
The VeriStand Gateway encountered an error while deploying the System Definition file.
Details:
Error -66212 occurred at Project Window.lvlibroject Window.vi >> Project Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
Possible reason(s):
LabVIEW: The data type of the reference does not match the data type of the variable.
=========================
NI VeriStand: NI VeriStand Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
• Sending reset command to all targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.

Can you deploy if you only have the two 9401 modules in the chassis (no other modules) and in the sysdef? I meant to ask if you could attach your system definition file to the forum post so we can see it as well (sorry for the confusion).
Are you using any of the specialty configurations for the 9401 modules? (ex: counter, PWM, quadrature, etc)
You will probably want to post this on the support page for the Scan Engine/EtherCAT Custom Device: https://decibel.ni.com/content/thread/8671
Custom devices aren't officially supported by NI, so technical questions and issues are handled on the above page.
Kevin W.
Applications Engineer
National Instruments

Receipt Qty in AP invoice does not match with actual receipt qty.

Hello everyone,
I am facing an issue in oracle Payables module. When we match invoice with receipt while preparing invoices, Quantity received shown in the Receipt quantity block in invoice window does not match with actual receipt quantity of that item. Due to this difference user is not able to book the invoice. Please help me to resolve this issue.
Thanks,
Himanshu Gupta

Exactly. What i mean is in the invoice window, There is a block called reciept quantity shown in the lower part. The received quantity displayed in that block is more the actual quantity being recieved. (when we see the recieving transactions). is this a bug?
thanks for your reply, awaiting your response......
Himanshu Gupta

My album artwork does not match the song in my playlists

After making playlists with music purchased from itunes in my music app, the art work does not match the title of the song / album. How can I fix this problem?

Hi freezerman84,
Thanks for the question. I understand you are experiencing issues with Album Artwork on your iPhone 5. To troubleshoot this issue, it may be best to completely resync your iPhone with iTunes. To do so, uncheck the "Sync Music" checkbox, and apply the changes (so there is ultimately no music syncing to your iPhone).
Once you have done that, recheck the "Sync Music" checkbox, and apply the changes. This will instruct iTunes to completely remove all music from your iPhone, and then copy the files once more. If you have a large amount of music, this initial sync may take a while.
If the above does not resolve your issue, it may be necessary to restore your iPhone:
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Additional information:
iOS: Syncing your data with iTunes
http://support.apple.com/kb/HT1386
Thanks,
Matt M.

Why does my app store account tell me that my payment method does not match my bank's records. my card is valid and works for iTunes but not the app store.

While trying to change my Credit Card info: The app store tells me that my payment method information does not match my bank records and to try again or enter a new payment method. My CC is valid and its the same CC ive had for a while. This CC info works for iTunes but is not being accepted for the App store.I have changed this info online but cannot change it on my iPhone. Can anyone tell me what i need to do?

Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers..
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes.

Output map: Document Type does not match any of the given schemas

On a send port, we have a map that uses a custom xslt. We were hoping to somehow design the map so the output was essentially a generic xs:any schema. But unless we ad a reference from our map assembly to the assembly that holds the actual schema for
the message pertaining to the map out put we get an error:
The Messaging Engine failed while executing the outbound map for the message going to the destination URL "C:\BizTalk\Test\%MessageID%.xml"
with the Message Type http://test#testmessage. Details:"Document type "outputtest#outputtestmessage" does not match any of the given schemas.
Is there a way to avoid having to have the reference?

Hi ,
In BizTalk messages are distinct from each other based on the message type . In your case http://test#testmessage (Namespace#RootNode)
Now coming to your case have you verified whether you have a schema type matching the response is deployed with the solution. The easy way is to look into specific BizTalk application schema node .
If not ,What you can do is to create a new schema for output having "TestMessage" as record and any element inside it. After that apply a mass copy
funtiod from source t destination(in your case any type schema created).
Thanks
Abhishek

Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)

Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
===========================================================
This is a SQL Server 2012 Developer Edition of SSRS.
I am getting this error when navigating to http://servername/Reports. The reports site was working fine, until I installed a SQL 2014 Developer instance (including SSRS) on the same server.
I can still get to the http://servername/ReportServer site.
Neither of these are using Sharepoint.
Any help resolving this issue would be greatly appreciated.
Below is the stack trace.
===========================================================
[FileLoadException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Reflection.Assembly._nLoad(AssemblyName
fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +0 System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity,
StackCrawlMark& stackMark, Boolean forIntrospection) +416 System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +166 System.Reflection.Assembly.Load(String
assemblyString) +35 System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +190 [ConfigurationErrorsException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel'
or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +1149
System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +323 System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +116 System.Web.Configuration.AssemblyInfo.get_AssemblyInternal() +36 System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection
compConfig) +212 System.Web.Compilation.WebDirectoryBatchCompiler..ctor(VirtualDirectory vdir) +174 System.Web.Compilation.BuildManager.BatchCompileWebDirectoryInternal(VirtualDirectory vdir, Boolean ignoreErrors) +57 System.Web.Compilation.BuildManager.CompileWebFile(VirtualPath
virtualPath) +295 System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +482 System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext
context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +108 System.Web.Compilation.BuildManager.GetVirtualPathObjectFactory(VirtualPath virtualPath, HttpContext context, Boolean allowCrossApp, Boolean
noAssert) +171 System.Web.Compilation.BuildManager.CreateInstanceFromVirtualPath(VirtualPath virtualPath, Type requiredBaseType, HttpContext context, Boolean allowCrossApp, Boolean noAssert) +52 System.Web.UI.PageHandlerFactory.GetHandlerHelper(HttpContext
context, String requestType, VirtualPath virtualPath, String physicalPath) +53 System.Web.HttpApplication.MapHttpHandler(HttpContext context, String requestType, VirtualPath path, String pathTranslated, Boolean useAppConfig) +519 System.Web.MapHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
+176 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +274
===========================================================

Hi Glen，
"The located assembly's manifest definition does not match the assembly reference." is generally caused by the loaded assembly's version is different than the expected version application refers to.
In this case, it should be caused by:
While starting Report Manager, the backend process ReportingServiceService need to load assemblies it refers to
ReportingServiceService reads the compilation/assemblies element from web.config(under Report Manager virtual patch)
If the compilation/assemblies is not existing, ReportingServiceService loads all assemblies from Bin folder. It can be verified from call stack System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory(). ReportingServiceService
uses System.Reflection.Assembly.Load with the assemblies' name only to load assemblies.
The Assembly.Load tries to load from the specify assembly by name from GAC at first. If it is found from GAC, it won't be loaded from Bin folder any more.
Since Reporting Service SharePoint Integration mode is installed, a same assembly of 'Microsoft.ReportingServices.SharePoint.ObjectModel' with different version might be installed to the GAC. That causes the error "The located assembly's manifest definition
does not match the assembly reference."
For more information about the error message and the loading process, please see:
http://blogs.msdn.com/b/junfeng/archive/2004/03/25/95826.aspx
https://msdn.microsoft.com/en-us/library/yx7xezcf(v=vs.100).aspx
Thanks,
Jinchun Chen

ClickOnce: Reference in the manifest does not match the identity of the downloaded assembly Office.dll

I have WPF application, which has the excel component reference. I have the deployment issue when i user Office 2007 installed on my server and try to access the application i get Reference in the manifest does not match the identity of the downloaded assembly Office.dll , but when office 2003 is installed there is no issue deplying.
Below is the detail of the issue.
PLATFORM VERSION INFO
    Windows             : 5.1.2600.131072 (Win32NT)
    Common Language Runtime     : 2.0.50727.3082
    System.Deployment.dll         : 2.0.50727.3053 (netfxsp.050727-3000)
    mscorwks.dll             : 2.0.50727.3082 (QFE.050727-3000)
    dfshim.dll             : 2.0.50727.3053 (netfxsp.050727-3000)
SOURCES
    Deployment url            : http://<Server>/VFOLDER/pages.xbap
    Application url            : http://Server/VFOLDER/Application%20Files/pages_1_0_0_3/pages.exe.manifest
IDENTITIES
    Deployment Identity        : pages.xbap, Version=1.0.0.3, Culture=neutral, PublicKeyToken=70c49c4ca21b317d, processorArchitecture=msil
    Application Identity        : pages.exe, Version=1.0.0.3, Culture=neutral, PublicKeyToken=70c49c4ca21b317d, processorArchitecture=msil, type=win32
APPLICATION SUMMARY
    * Online only application.
    * Browser-hosted application.
ERROR SUMMARY
    Below is a summary of the errors, details of these errors are listed later in the log.
    * An exception occurred while downloading the application. Following failure messages were detected:
        + Reference in the manifest does not match the identity of the downloaded assembly Office.dll.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
    No transaction error was detected.
WARNINGS
    There were no warnings during this operation.
OPERATION PROGRESS STATUS
    No phase information is available.
ERROR DETAILS
    Following errors were detected during this operation.
    * [6/22/2009 5:43:31 PM] System.Deployment.Application.InvalidDeploymentException (RefDefValidation)
        - Reference in the manifest does not match the identity of the downloaded assembly Office.dll.
        - Source: System.Deployment
        - Stack trace:
            at System.Deployment.Application.DownloadManager.ProcessDownloadedFile(Object sender, DownloadEventArgs e)
            at System.Deployment.Application.FileDownloader.DownloadModifiedEventHandler.Invoke(Object sender, DownloadEventArgs e)
            at System.Deployment.Application.FileDownloader.OnModified()
            at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
            at System.Deployment.Application.SystemNetDownloader.DownloadAllFiles()
            at System.Deployment.Application.FileDownloader.Download(SubscriptionState subState)
            at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification notification, DownloadOptions options)
            at System.Deployment.Application.DeploymentManager.SynchronizeCore(Boolean blocking)
            at System.Deployment.Application.DeploymentManager.SynchronizeAsyncWorker()
COMPONENT STORE TRANSACTION DETAILS
    No transaction information is available.
Any one has faced the problem... any help will be very grateful.
Thanks in Advance.
Sunil

Thanks for the reply Robin, here is some of the observation, hope you can provide some solution from your end.
1. When Publish my build, in the Manifest file dependentAssembly has two reference to Office.dll one with version 11.0.0.0 and another with version 7.0.3300.0.
2. In the pages_1_0_0_4 Published folder has one office.dll with version 11.0.5530.0
3. In the root folder of the virtual directory has one office.dll with version 7.0.9466.0
Can you please give your thoughts, what exactly wrong with the deployment, i feel its a assembly mismatch. where in the application files i have set the required assembly. please provide your useful solution.
Thanks in Advance.
Sunil

Object does not match target type when raising an event from c# to VB6

I have a c# .net DLL that I use from a VB6 app. It exposes an event,
and the VB6 app is sinking it.
The VB6 app is receiving the event, as long as it is raised from the
main thread of the .net DLL.
I have an aync task being handled inside the DLL (delegate BeginInvoke). Any
attempt to raise the event from within that thread casuses the reported
error, even from within the AsyncCallback function, when the thread is ending.
I noticed that the delegate for the event is not declared inside the
interface. It's in that module, but above the interface definition:
    [ComVisible(false)]
    public delegate void LoggingEventHandler( string logData );
The event is declared in the class itself as:
    public class Processor : _Processor
        public event LoggingEventHandler        LogNotification;
Finally, to raise the event:
if ( this.Completed != null )
    this.Completed( true );
If I open the tlb with OLEVIEW, I can see the public event just fine. Of course, I expected to, as it's working up until the helper thread kicks in.
Now for the REAL WIERD PART! This DOES work on several servers that have
been in production for months. It's just this one server that it won't work
on. Same code. Resinstalled/registered it 1,000 times. It took me a while to
find that an error was even occuring, since it was being raised in the
seperate thread. In other words, I'm receiving the event just fine on a series of servers. This is a new machine we're trying to bring online. I suspect it's environmental, but I can't figure it out.
I don't understand why the publisher would be expecting a certain type of
subscriber in the first place... unless the error is really triggered by the client when the event reaches it. I've put logging into the client, though, and the first line of code inside the event is not being executed.
For the VB6 app, I reference the tlb file that is automatically created when
I compile (Interop is checked). I unregistered and re-registered the tlb on
the server. I regasm'd the dll itself. All dlls are in the same folder - not
in the GAC.
The stack trace is as follows:
   at System.RuntimeType.InvokeDispMethod(String name, BindingFlags
invokeAttr, Object target, Object[] args, Boolean[] byrefModifiers, Int32
culture, String[] namedParameters)
   at System.RuntimeType.InvokeMember(String name, BindingFlags invokeAttr,
Binder binder, Object target, Object[] args, ParameterModifier[] modifiers,
CultureInfo culture, String[] namedParameters)
   at System.RuntimeType.ForwardCallToInvokeMember(String memberName,
BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData&
msgData)
   at HPFS.Queue.IProcessorEvents.LogNotification(String logData))

This is driving me nuts!
I sure would appreciate any suggestions.
I got this working on one of the two machines. The other machine had some other issues, so I had it re-imaged. It's been so long since I fixed the first one, that I can't remember exactly how I did it. Plus, I did so many things to it over two weeks, that I never really felt confident, anyway. But ... I could *swear* that the last thing I did back then to get this event to flow was to re-register the DLL's TLB.
So ... This is win 2k with FW 1.1 + SP1.
Completed is the delagate I'm trying to invoke.
this.Completed.Target.GetType().Name = "__comobject"
I've tried everything. Unregistered the .tlb. Unregistered the .net DLL. Verified that the app completely failed while unregistered. Created the TLB using RegAsm /tlb syntax.
I tried using CLR SPY. It registers nothing. It only lets me pick an EXE. This is a DLL tring to raise to an EXE.
I've looked at the TLB in OLE VIEW and I just don't know what I'm looking at.
Is there any other tool or technique I can use to audit/monitor/trap this? .net is giving me *** for details about what's failing. I wish I could somehow debug into exactly what it's trying to do and get more details on the failure.
Here's the error I'm getting:
(Code -1) Object does not match target type.<Source:mscorlib>(Stack:    at System.RuntimeType.InvokeDispMethod(String name, BindingFlags invokeAttr, Object target, Object[] args, Boolean[] byrefModifiers, Int32 culture, String[] namedParameters)
   at System.RuntimeType.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParameters)
   at System.RuntimeType.ForwardCallToInvokeMember(String memberName, BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData& msgData)
   at HPFS.Queue.IProcessorEvents.Completed(Boolean success)
   at HPFS.Queue.Processor.RequestDone())
Processor = the DLL I'm trying to raise the event from.
IProcessor = the event interface that's exposed through COM.

ERROR ITMS-9000: "File given does not match type JPEG ... Image is likely corrupt

Hi ALl,
On compliing my book get these errors with ITunes producer...I've resaved the files out with photoshop and they seems fine?
Package Summary:
1 package(s) were not uploaded because they had problems:
          /Users/Umran/Music/iTunes Producer/Playlists/9780957408654.itmsp - Error Messages:
                    Apple's web service operation was not successful
                    Unable to authenticate the package: 9780957408654.itmsp
                    ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@1cf629f[userString=An unknown error occured while parsing. Image is likely corrupt. Exception message: null]" at Book (MZItmspBookPackage)
                    ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@1801285[userString=We reached the end of the file before we expected. Image is likely corrupt]" at Book (MZItmspBookPackage)
                    ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@1e056e9[userString=We reached the end of the file before we expected. Image is likely corrupt]" at Book (MZItmspBookPackage)
                    ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@11d58e0[userString=We reached the end of the file before we expected. Image is likely corrupt]" at Book (MZItmspBookPackage)
                    ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@127c00e[userString=We reached the end of the file before we expected. Image is likely corrupt]" at Book (MZItmspBookPackage)
                    ERROR ITMS-5107: "VirtualLandscapesTheModernEra20002012.epub: Fixed-layout books must supply a text or bodymatter starting location in the guide." at Book (MZItmspBookPackage)
Any advice??? Hope someone can help!

iBookstore Publisher Support send me a fast response email which included some helpful info:
Please make sure that all image files inside the ePub end with one of the following: ".tif", ".jpg", or ".png" and that the file itself matches the file extension type. To check if the image file matches the file extension type, please right click on the image then select "Get Info". Once the info tab appears, please make sure that the file extension type of the image file matches the "Kind" found under "General".
For further information regarding embedded images, please refer to the iBookstore Asset Guide, which is available for download in the Deliver Your Content module in iTunes Connect.
And they INCLUDED THE TRANSPORTER LOG (!), the log generated by iTunes Producer as it tries to upload a book. We were able to search for the Validation Error # within the log and find out which image Producer was trying to upload when it encountered an error. Turns out the problem was a corrupted screenshot jpeg.
Grateful!

[JGSS] AP_REQ token id does not match! while acceptSecContext

Similar Messages

Maybe you are looking for