JMF Problem with Logitech camera

Hi
I have a problem with JMF Registry Editor. I've tryed Detect Capture Devices and during detecting my computer crashes (blue screan) and restart the system. How can I solve this problem? I've set JMFHome.
Thank you in advance.
Falken

Blue screen means something in the Windows code is crashing your computer. There's probably not anything you can do to fix it except unplug any devices you have plugged in...

Similar Messages

JMF crashed with Logitech QuickCam Pro for Notebook using latest driver.

JMF crashed with Logitech QuickCam Pro for Notebook using latest driver
I can't register the webcam in JMF. WinXP crashed with Blue-screen-of-dead.
The crash occurs on installation of JMF when the installer tries to detect my capture devices.
Windows also crashes when i open the JMF Registry Editor and tell it to search for my capture devices.
I use a QuickCam Pro for Notenooks with driver version 11.80.1065.0000 on Windows XP with JMF 2.1.1e.
PS: I can use JMF to connect to other brand's webcam.
So, how to solve it?

So, how to solve it?JMF apparently doesn't work with that camera...so if you want to install JMF, you should unplug your Logitech cam. If that doesn't work, uninstall it.

Problem with Nokia Camera and Smart Sequence

Hi,
I'm having a problem with Nokia Camera and the Smart Sequence mode.
Basically, if you take a picture using nokia camera, and view it in your camera roll, it usually says, underneath the pic "open in nokia camera".
Well, if I take a pic using the Smart Sequence mode, it just doesn't say "open in nokia camera" so, to use the functions of smart sequence (best shot, motion focus, etc), I have to open nokia camera, go to settings and tap the "Find photos and videos shot with nokia camera" option.
Does anyone has the same problem? Anybody solved it?
I already tried reinstalling nokia camera, but that didn't help.
I'm running Nokia Black on my 925.
Thanks everyone!

Hi,
I had the same problem with my 1020. It did get fixed with the last update to Nokia camera.
However, IIRC, it didn't just happen right away. When browsing the camera roll I'm pretty sure that the "open with Nokia camera" text wasn't there.
Slightly disappointed I opened the (Nokia) camera anyway and was going to test the smart sequence again. I noticed the only precious pic I'd taken using this actually appeared top left of the screen.
I opened it and I had all the smart sequence editing options again - that we're missing previous. Made a new picture and saved it.
Now when in camera roll the text shows below the image and all is good.
This probably doesn't help much except that it didn't seem to fix automatically.
I work @Nokia so I can ask around a bit to see if this is a known / common issue (not that I know any developers)

Hi, i have a macbook air and i've been having problems with the camera when i'm using skype. i know im no the 1st one and i'd like to know when apple or someone 'll do something about this.

hi, i have a macbook air and i've been having problems with the camera when i'm using skype. i know im no the 1st one and i'd like to know when apple or someone 'll do something about this.

Try reinstalling Combo Update.
http://support.apple.com/kb/DL1676
Best.

E72: a great problem with my cam

Hi, all!!
That's one problem with my cam: when recording video on flash card there are some delays in picture changing and the image become smooth and then divide into squares??? how can i solve this bug???
ps: everything is ok when i record on the phone memory!
Thank you

Dearest nokia representatives....my problem is in the video recording mode..when i'm in the middle of recording,the motion in the screen moves slowly for about half a second..and sometimes it stucks before it went back normal and then again stuck...i'm terribly angry when i'm recording the precious moment s. i'm using the high quality setting and when i used the normal setting,the problem is gone but the picture is not good as the high quality setting.......
please solve my problem anybody/nokia?!...

I bought a new camera, Nikon D3300 . LR5 won't open RAW images. JPEG only. No problems with previous cameras D3100 od Canon S95

How do I open RAW images in LR5 from
my new camera? D3300. no problems with other cameras. it tells me, preview unavailable for this file

D3300 needs at least LR 5.4, the latest version is now 5.7. Its a free update.

Having problem with my camera after updating 8.1.3

having problem with my camera after updating 8.1.3.. how will you fix this

Try Resetting your phone: hold down the home and sleep buttons, wait for the Apple logo, let go of the buttons. If this does not work Restore your iPhone in iTunes.

Problems with integrated camera of lenovo 3000 v100

A have a problem with the camera of my notebook, when I open the camera the image that it show me in the screen of the notebook it's a many colors, the light afects the image and it apears to be green an some metalic colors. I already tryed to instal the driver but it didn't work, can some one help me??
Thanks

Lines, it would be better to get a new battery. Search online with battery FRU number or call Lenovo to purchase from Lenovo.
I would suggest you buy a wireless usb adapter too which won't cost much more than the headache.
It's not the brand, batteries can be unpredictable, as any electronic product can be. I had been using my laptop for last 2 years and it has been doing perfectly fine as it was when i got it; except for the battery which was battery manufacturer's problem i guess.
Dh.
3000 N100-0768DKU
XP Home 5.01.2600 SP2
Ubuntu 8.04(hardy)

Problems with my cam

ive used a site for ages with no problems with my cam. now I am not getting the box asking for permission to use my cam, and my cam wont work on it. . it works fine on other sites, its just this one site,,,ive gone through the security and privacy setting on adobe flash and tried the suggestions but still no good

Maybe the web cam manager?
I am a student at DeVry University

Lenovo 3000 V100, problems with integrated Camera

Hello,
I bought this Lenove a couple of years ago ( autumm 2007 ).
equipped with Windows Vista, Location=Swedish.
Since then I have had problems with the camera, on and off.
The Camera was not working when I got home, I then got help from
the support desk. Then later on it stopped working, now it is only showing a black
box - either it could be after a Vista update or after a Lenovo update - I don't know.
Is there anyone who could help me out here.
Would like to use that camera, since it is integrated.
Thanks for your help, Ink

Hi Slape84,
Welcome to Lenovo Community Forums!
I’m sorry to hear that the integrated camera is not getting enabled even after trying to install the drivers for the camera. I suggest you to make sure the LEM (Lenovo Energy Management) is installed in the computer, if not please download it from the below link by selecting the exact Model Type of your G580 Laptop:
Drivers and software - Lenovo Ideapad Laptops
Then press Fn + Esc after installing the LEM in the computer this is the shortcut key to Turn on/off the integrated camera, now install the drivers for the integrated camera from the above link. But while installing while installing the driver right click on the downloaded file and select “Run as administrator” option to get it installed without any error.
Do post us back if the issue still persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Is there a known problem with some cameras, e.g. the E-410?

I bought an Olympus E-410 yesterday, took a few pictures, and then wanted to load them onto my eMac. But the computer never saw the camera. The screen on the camera said "One moment" forever. I had installed the software that came with the camera, but that said "When iPhoto comes up close it and open [the Olympus software]".
I installed it on my Windows machine, and it saw the camera as an installed device, and the Olympus software worked fine, with the same cable.
I would have expected it to work because it is explicitly mentioned here: http://docs.info.apple.com/article.html?artnum=306297
We regularly add pictures from my wife's Canon Powershot A80, into iPhoto, and it works fine.
Any helpful ideas?
Message was edited by: Logistes

No! I was wrong. My iPod showed the same symptom. The common denominator is that the Maxtor was plugged in at the same time. I had no problem with the new camera today, after removing the Maxtor's USB.
That's a relief, but not perfect. I guess I should have got a Firewire HDD

Aspect ratio problem with consumer camera and Premiere Elements 11

Hello everyone - I'm Steve. I'm new here. I do still photography on a pro level, digital and analog, but I am an absolute dummy with video...but then, I don't want to do much, just rudimentarily cut a few family videos, upload them, etc.
However, I can't get Premiere Elements 11 to output my self-shot clips in a correct aspect ratio.
My camera is a consumer-model Canon Legria FS200. I shoot video in a resolution the camera calls XP. The camera says they are 16:9, the camera monitor shows them as 16:9, and when I use the software (called Pixela Image Mixer) that came with the camera to import the clips to disk, I get mpg files that Windows (7) Explorer says are 720x576 pixel, and that VLC player correctly displays as wide-screen 16:9 without me having to tweak its display settings.
However, the moment I import them into Premiere Elements, they appear horizontally squeezed, and I can't seem to output them any other way, with or even without editing them in Premiere.
I tried to use the recipe given here: https://forums.adobe.com/message/5987538#5987538 , (replacing only NTSC with PAL because I'm in Germany), namely, setting the project preset set manually for PAL/Hard Disk etc/ Widescreen 48kHz and check force selected program settings. But no matter, Premiere displays the video in horizontally compressed form, with large black bars to the right and to the left.
On the export side, setting the output to PAL DVD Widescreen and setting the Pixel Aspect Ratio in the output settings to Widescreen does not help, either. Neither can I force VLC player manually to display the correct aspect ratio. BTW, audio is perfect all along.
This is about as far as I can see myself getting without help. Has anyone any idea?
Thanks a lot in advance,
Steve, from Germany

Steve
I see that you are now in the Adobe Premiere Elements Forum with your problem already solved.
I did not see any Why for what you encountered, so I thought I would give you my take on this.
Your Canon FS200 gives video with MPEG2 video compression with a .mod file extension. That .mod file extension can be found in use with some Canon as well as JVC cameras. The .mod file history with Premiere Elements (any version) is problematic. In some instances, the user needs to rename the file extension from .mod to .mpg before it can be imported, but not always. But, the .mod widescreen comes packaged with the aspect ratio dilemma, presenting as 4:3 rather than 16:9. The classical argument is whether Premiere Elements does not recognize a .mod file's 16:9 flag or whether the 16:9 flag got lost.
There used to be a utility contributed by an user to handle the file extension and/or aspect ratio issues. Now, the general fix is to import the file into Premiere Elements (in your case 11) with Add Media/Files and Folder/Project Assets. And in Project Assets, you right click the file, select Interpret Footage, and go to the Pixel Aspect Ratio section of the Interpret Footage dialog where you
(a) dot the Conform To:
and
(a) set the Contorm To: field to (in your case) D1/DV PAL Widescreen 16:9 (1.4587)
Once you are in the program and have the file on the Timeline, if any black edges, you can click the monitor to bring up the image's bounding box. Then drag on a bounding box handle to scale the image just to the point where the black edges are gone.
If you ever need the Adobe Premiere Elements Forum, maybe bookmark this link
Premiere Elements
You should expect to have this issue with any .mod widescreen file that you obtain from your Canon FS200 camera.
ATR
Add On...If you are depending on the program to set the correct project preset, you may want to check into what it is setting based on the properties the first file you drag to the Timeline. A manual setting of the project preset may be in order. Please see
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting

Continuing import problem with USB cameras.

In other threads people have discussed problems they are having with iMovie 7.1.1 in importing with USB cameras. I have had the same experience with my Sony CX-7 on two different MacBook Pros including a brand new one. Once in a while the camera will trigger the import page but usually not. Is this a bug Apple is aware of and working on?? Other suggestions for a fix or work around. Very frustrating.

Hmmm... I think there might be some sort of bug with the app regarding USB port connections. iMovie wouldn't even launch for me until I disconnected my 2 external drives. However, it seems that when I mount the external HD that's connected via firewire, iMovie is able to launch. But when it's the other external drive that's connected via USB that's mounted, that's when iMovie won't even open... And the weirdest thing is that, when the external HD that's mounted via USB is connected, just as you think the app has launched correctly, it sort of brings up an error message box that I can't even read for it just crashes immediately...

Problems with logitech headset

Hey guys I was just playing Call of Duty 4 the other day, using my Logitech headset on Mountain Lion 10.8.3. But when I updated to 10.8.4 the sound from the game just completely stuffed up. The music is OK but all other sound is gone. The only other sound I can hear is what appears to be voice chat coming from the right headphone but it is very, incredibly soft and you an barly hear it. Although the sound is fine when I use the built-in speakers. Is there a problem with the headset or is it just the software in Call of Duty 4?

Hi,
As it has been so long I reread the topic.
I am now confused though.
In the first post you said
... It works fine with Skype, but when using iChat, there is no microphone pick up. I have set the audio settings to the USB headset in both the System preferences for my iMac and for the iChat preferences; ...
From that I went on to say set the iChat bits to anything else then set System Preferences > Sound > Input and then reset iChat to the Headset Mic option.
You then said it was the Output (incoming Audio) that you could not hear.
I suggested the same technique be applied to the iChat Output options/System Preferences > Sound > Output with iChat again being Set "Last".
You have replied that you have set the preferences in both places but not to the order in which you did them (this is the important bit).
I have seen one post that suggests that Output to the Headset should be done before the Mic/Input settings but did view this with a deal of scepticism.
Also even though you have no MIDI device can you Open Audio MIDI Set up in Applications/Utilities and see what sample rate the Headset is using for Input (Mic) and Output.
Ideally iChat seems to prefer 44100
You may also notice here that you have different controls over the volume.
Is it Mic/Input (your Outgoing Audio) or Incoming Audio/Output to Headset that is the issue ?
8:52 PM Tuesday; June 22, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
Message was edited by: Ralph Johns (UK)

Problem with the Camera Raw 7.1 zip file

I downloaded the Camera Raw 7.1 from the Adobe website and I cannot unpack the .zip file,there is always some CRC error, so I cannot install either. I tried through the Application Manager but the same problem happened with that one as well. I need the 7.1 for the Nikon D800. Can u help me somehow?

You need to download the file again. Your download took an error. It happens.
If it continues to happen, you may need to take it up with your internet provider; file downloads are not supposed to be corrupted by link errors, and it may be that they have some problems with their equipment.
-Noel

JMF Problem with Logitech camera

Similar Messages

Maybe you are looking for