JMS Correlation ID not converting to EBCDIC Hexa

We are using the PI 7.1 system on a AIX platform.
We use the JMS adapter to send messages to a MQ Queue manager on a AS400platform.
WebSphereMQ transport protocol is in JMS adapter.
We are generating custom dynamic correlation id using a UDF.
Expectation is to receive the correlation id in Ebcdic format because the
receiving end is a AS400 system.
But what I receive there is a Ascii Hexa.
For a example we are sending the correlation id as 0180000012. (ASCII)
What MQ receive is 30313830303030303132 (ASCII HEX)
Where what MQ should receive is F0F1F8F0F0F0F0F0F1F2 (EBCDIC HEX)
I need help to find out why JMS adapter is converting the correlation id
in to ASCII HEX without converting to EBCDIC HEX.
Appreciate a lot if any one can provide some help on this.
Thanks a lot,
Tania.

I am not sure if I have understand the issue correctly.
Do you create an ASCII string and the ASCII characters are not converted into EBCDIC,
or do you create a HEX String?
Or does the JMS adapter converts your ASCII string to Hex?
I have the impression that the behaviour is a design gap, which nobody has noticed before.
A work around could be in converting the ASCII to EBCDIC inside the UDF,
Report this to SAP

Similar Messages

JMS sender adapter not converting data to XML properly.

Hi,
I am using JMS adapter to read data from MQ. The length of each segment is fixed.
The problem is there is no new line character at the end of each segment .So JMS adapter is just reading the first line and not reading the rest.
What I found out that if I place a new line character at the end of each segment it works fine. But for me I have constraint that in MQ the source system cannot send a new line character at the end of each segment. So can any one tell me how can I solve this issue?
The sample data that I am getting from MQ is:
AA12345
BBXYZXY CC12300
CC456AS
We are using SP13.
The length of each segment is fixed.
Any help is appreciated

Hi Sameer,
fieldFixedLengths is used to divide the data among the elements of a segment.
For example if I have the segment structure like
AA1234567
BB12345
BBXYZ12
Then in the module processor we define
xml.recordsetStructure NameA,1,NameB,*
xml.NameA.fieldNames MyKey,field-nameA
xml.NameA.fieldFixedLengths 2,7
xml.NameA.fieldNames MyKey,field-nameB
xml.NameB.fieldFixedLengths 2,5
As per my understanding goes First it reads the first line till it finds a new line char and then it uses fieldFixedLength to assign data to the fields inside the segments. Here in the above example A1=AA and A2=1234567
But I am not aware if we can use fieldFixedLength to identify the segment it self. If so then how can I use it can u let me know?
Thanks

JMS Correlation ID in JMS Receiver Adapter

Hi ,
I am working in PI7.1 on IDOC to JMS interface,
I want set IDOC number as Correlation ID in JMS queue ,
I did following Correlation steps ,
1. Set JMSCorrelation ID to PI Conversation ID
2. Checked JMS CorrelationID of request
3.Value to PI Conversation ID
In Adavanced Tab
Checked Use Adapter specific Message attributes
Checked Fial if Adapter specific Message attributes missing
Checked JMS Message Correlation ID
Additional Parameter
DCJMSCorreleationID String
I have created user defined function , Not using BPM , i don't have correlation ID in target field data type
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/JMS", "DCJMSCorreleationID");
return conf.put(key, idoc_number);
I tested UDF with mapping to target field, UDF is working .
But in JMS Correlation ID value is null
I am getting error in Communication Channel monitor if ticked check box of fail If adapter-specific message attributes
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Dynamic header records are missing/incorrect specified in message: 000c2901-fc48-1def-82f9-4b126dff2151. Erroneous/Unspecified headers are: DCJMSCorreleationID
1/27/10 11:02:36 PM 000c2901-fc48-1def-82f9-4b126dff2151 Dynamic record/records: DCJMSCorreleationID, that correspond to the JMS property/properties: JMSCorrelationID, respectively is/are either missing from the message: 000c2901-fc48-1def-82f9-4b126dff2151, or have invalid types specified in the channel configuration

Hi Swetha ,
Thanks for your response ,
I created user defined function with one parameter , no input parmeter .
My root node of IDOC as Structure type ,
In UDF , i have not mapped the IDOC number
public String CorrelationID(String messageId, Container container) throws StreamTransformationException{
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/JMS", "DCJMSCorreleationID");
return conf.put(key, messageId);
messageId I need map in additonal parameter .
Thanks ,
Laxman.
DCJMSCorreleationID messageId

Problem with JMS Correlation i Async/Sync bridge

This is my scenario:
Im receiving a request message from the JMS-adapter and forward this via a async/sync bridge to CRM. Im using a synchronous proxy in CRM. I want to send the response from this proxy back to MQ via the JMS adapter and put my original JMS Message ID in the JMS Correlation ID in the response message.
Ive read about how to configure this in the pdf-document How to Correlate JMS messages.
I did as suggested and that is as follows.
1.     In my receiver channel I set the Correlation Setting Set XI Conversation ID To=JMSMessageID.
2.     In my integration process (async/sync-bridge) I set the Conversation ID in my async send step to the Conversation ID of my request message.
3.     In my sender channel I set the Correlation Setting Set JMSCorrelationID To=XI Conversation ID.
When I test my scenario I get the following error:
New JMS message cannot be correlated with the XI message although it is configured. Unable to set because correlation value is null. Correlation rule: XI_CONVERSATIONID, correlated property: JMSCorrelationID
I thought that my Conversation ID should carry the value of my initial JMS Message ID. I know that this is not null.
Can somebody please help me?
Kind regards.
/Helé

Hi Wallace,
I tried to set the Conversation ID to the Correlation ID instead but I still get the same error.
The sending application needs to correlate the request message with the corresponding response and since we are using MQ this is the way to do it.
regards.
/Helé

JMS Correlation Issue

Hello
I actually stole some of the text of this question from a previous post. The post hasn't had any activity for over a month, so I thought I would repost as I need a solution. I have modified it to my situation.
I need to implement following scenario in my BPEL process:
1. BPEL enqueues using JMS Adapter message to queue 1. (Invoke activity)
2. BPEL dequeues using JMS Adapter message from queue 2. (Receive activity)
I need to correlate this two actions. How do I do this? I have tried the following with no success.
1. BPEL produces messages on queue 1 with JMS corr_id header variable set
2. Program dequeuing from queue 1 stores corr_id value in database.
3. Program finishes processing work and produces message on queue 2 specifying corr_id from value stored in database.
4. BPEL consumes message from queue 2. Here it is not working. The correlation does not seem to be happening.
Any ideas?
Thanks
Kirk

I think you need to define the correlation/correlation sets in BPEL Invoke and receive activities. The correlation identifier can very well be the JMS corr_id field value. I think what you tried is JMS message correlation as opposed to correlation in BPEL processes.
I haven't tried this myself. So my suggestion is purely conceptual.
HTH
Rajesh

OSB : How to use JMS Correlation ID to associate Reqeust with the Response

Hi,
I am using a business service to publish request on the queue. Now I want to use the same Business Service to send back me the response based on the JMS Correlation ID. Right no I am just trying to get the response without applying any logic to the JMS Correlation ID but its not working. Can any body let me know how to do this.
Regards,
Anuj Maheshwari

Use response by Correlation ID pattern as specified in this link:
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/interopjms/MsgIDPatternforJMS.html#wp1050154

Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it?

Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it in some other form befor dragging it?

Hello djensen1x,
Could you please let me know what version of Acrobat are you using.
Also, tell me your workflow of combining those PDF files?
Please share the screenshot of the error message that you get.
Hope to get your response.
Regards,
Anubha

JDBC Receiver does not convert empty string to NULL

Hello experts,
I am facing a problem with an INSERT statement to ORACLE DB where some of the fields are empty, for example:
- <STATEMENT_VLP_CONT_DETAILS>
- <TABLE_VLP_CONT_DETAILS ACTION="INSERT">
<TABLE>VLP_CONT_DETAILS</TABLE>
- <ACCESS>
<VLP_HDR_ID>43</VLP_HDR_ID>
<VLP_CONT_LINE_ID>1</VLP_CONT_LINE_ID>
<QUANTITY>1</QUANTITY>
<OWNER>CBHU</OWNER>
<SERIAL_NO>3372739</SERIAL_NO>
<CONT_ISO_CODE>2300</CONT_ISO_CODE>
<WEIGHT>6.44</WEIGHT>
<POL>ILASH</POL>
<POD>FRFOS</POD>
<FD>FRFOS</FD>
<OPER_CODE>COS</OPER_CODE>
<CUR_STOW_LOC>150102</CUR_STOW_LOC>
<PRV_STOW_LOC />
<HAZARDOUS>N</HAZARDOUS>
In the JDBC Receiver comm channel I selected: Interpretation of Empty String Values = NULL Value.
It seems the empty strings are not converted to NULL values as can be seen in the reflected SQL statement in RWB:
INSERT INTO VLP_CONT_DETAILS (VLP_HDR_ID, VLP_CONT_LINE_ID, QUANTITY, OWNER, SERIAL_NO, CONT_ISO_CODE, WEIGHT, POL, POD, FD, OPER_CODE, CUR_STOW_LOC, PRV_STOW_LOC, HAZARDOUS, EMPTY, REFER, OOG, HAZARD_IMDG, TEMP_SET, TEMP_MIN, TEMP_MAX, FRONT_OVL, REAR_OVL, RIGHT_OVW, LEFT_OVW, OVERHEIGHT, COMMODITY, BOOKING_REF, ALLOTMENT, YARD_LOC, LD_SEQ_CRANEID, LD_SEQ_NUMBER, LD_STATUS, STACKABLE, OPT_PORT_CODE1, OPT_PORT_CODE2, OPT_PORT_CODE3) VALUES (44, 1, 1, CBHU, 3372739 , 2300, 6.44, ILASH, FRFOS, FRFOS, COS, 150102, , N, N, N, N, , , , , , , , , , , , , , , 0, 64, N, , , )
So, I am getting the following error:
Could not execute statement for table/stored proc. "VLP_CONT_DETAILS" (structure "STATEMENT_VLP_CONT_DETAILS") due to java.sql.SQLException: ORA-00936: missing expression
Help would be appreciated.

Hi Effi,
There is a mismatch in the field and thier value.
Here field id 37
VLP_HDR_ID, VLP_CONT_LINE_ID, QUANTITY, OWNER, SERIAL_NO, CONT_ISO_CODE, WEIGHT, POL, POD, FD, OPER_CODE, CUR_STOW_LOC, PRV_STOW_LOC, HAZARDOUS, EMPTY, REFER, OOG, HAZARD_IMDG, TEMP_SET, TEMP_MIN, TEMP_MAX, FRONT_OVL, REAR_OVL, RIGHT_OVW, LEFT_OVW, OVERHEIGHT, COMMODITY, BOOKING_REF, ALLOTMENT, YARD_LOC, LD_SEQ_CRANEID, LD_SEQ_NUMBER, LD_STATUS, STACKABLE, OPT_PORT_CODE1, OPT_PORT_CODE2, OPT_PORT_CODE3
And value is 35
44, 1, 1, CBHU, 3372739 , 2300, 6.44, ILASH, FRFOS, FRFOS, COS, 150102, , N, N, N, N, , , , , , , , , , , , , , , 0, 64, N, , ,
Give empty values for nuil fields so that they can be made NULL by jdbc adapter
Regards
Suraj

JRE 1.5 VS. JRE 1.6 - Could not convert socket to TLS

I have an applet that is trying to send an email through an SMTP server. It works just fine 1.6 but on 1.5 it blows up and I'm kind of at the end of my rope. Any help here would be great.
I've had to set up the DummySSLSocketFactory as described in the JavaMail readme but still no luck on 1.5.
Here is the error:
DEBUG: setDebug: JavaMail version 1.4ea
DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc.]
DEBUG SMTP: useEhlo true, useAuth true
DEBUG SMTP: trying to connect to host "mail.bluebottle.com", port 25, isSSL false
220 fe0.bluebottle.com ESMTP Sendmail 8.13.1/8.13.1; Thu, 28 Jun 2007 08:25:34 -0700
DEBUG SMTP: connected to host "mail.bluebottle.com", port: 25
EHLO CC-FRED
250-fe0.bluebottle.com Hello 207-174-73-129.officepartners.us [207.174.73.129] (may be forged), pleased to meet you
250-ENHANCEDSTATUSCODES
250-PIPELINING
250-8BITMIME
250-SIZE
250-DSN
250-AUTH LOGIN PLAIN
250-STARTTLS
250-DELIVERBY
250 HELP
DEBUG SMTP: Found extension "ENHANCEDSTATUSCODES", arg ""
DEBUG SMTP: Found extension "PIPELINING", arg ""
DEBUG SMTP: Found extension "8BITMIME", arg ""
DEBUG SMTP: Found extension "SIZE", arg ""
DEBUG SMTP: Found extension "DSN", arg ""
DEBUG SMTP: Found extension "AUTH", arg "LOGIN PLAIN"
DEBUG SMTP: Found extension "STARTTLS", arg ""
DEBUG SMTP: Found extension "DELIVERBY", arg ""
DEBUG SMTP: Found extension "HELP", arg ""
STARTTLS
220 2.0.0 Ready to start TLS
javax.mail.MessagingException: Could not convert socket to TLS;
nested exception is:
                java.net.SocketException: com.cc.util.controller.email.DummySSLSocketFactory
                at com.sun.mail.smtp.SMTPTransport.startTLS(SMTPTransport.java:1230)
                at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:378)
                at javax.mail.Service.connect(Service.java:275)
                at javax.mail.Service.connect(Service.java:156)
                at javax.mail.Service.connect(Service.java:176)
                at com.cc.util.discovery.DiscoveryService.sendViaSMTP(DiscoveryService.java:422)
                at com.cc.util.discovery.DiscoveryService.discoverSMTPService(DiscoveryService.java:378)
                at com.cc.util.discovery.DiscoveryService.discoverPOP3Service(DiscoveryService.java:330)
                at com.cc.util.discovery.DiscoveryService.checkEmailService(DiscoveryService.java:126)
                at com.cc.applet.CCNonBlockingThread$1.run(CCNonBlockingThread.java:180)
                at java.security.AccessController.doPrivileged(Native Method)
                at com.cc.applet.CCNonBlockingThread.processEventData(CCNonBlockingThread.java:178)
                at com.cc.applet.CCNonBlockingThread.run(CCNonBlockingThread.java:139)
Caused by: java.net.SocketException: com.cc.util.controller.email.DummySSLSocketFactory
                at javax.net.ssl.DefaultSSLSocketFactory.createSocket(Unknown Source)
                at com.sun.mail.util.SocketFetcher.startTLS(SocketFetcher.java:249)
                at com.sun.mail.smtp.SMTPTransport.startTLS(SMTPTransport.java:1226)
                ... 12 moreHere is the code:
               Properties props = new Properties();
               props.put("mail.smtp.auth", "true");
               props.put("mail.smtp.host", smtpServer);
               props.put("mail.smtp.starttls.enable","true");
               // the line below is for java 1.5
               java.security.Security.setProperty("ssl.SocketFactory.provider","com.cc.util.controller.email.DummySSLSocketFactory");
               // these are for java 1.4
              props.setProperty("mail.smtps.socketFactory.class","com.cc.util.controller.email.DummySSLSocketFactory");
              props.setProperty("mail.smtps.socketFactory.fallback", "false");
               Session session = Session.getInstance(props, null);
               session.setDebug(true);
               // -- Create a new message --
               Message msg = new MimeMessage(session);
               // -- Set the FROM and TO fields --
               msg.setFrom(new InternetAddress(from));
               msg.setRecipients(Message.RecipientType.TO,InternetAddress.parse(to, false));
               // -- Set the subject and body text --
               msg.setSubject(subject);
               msg.setText(body);
               // -- Set some other header information --
               msg.setHeader("X-Mailer", "FuserDiscoveryProcess");
               msg.setSentDate(new Date());
               // -- Send the message --
               Transport tr = session.getTransport("smtp");
               tr.connect(username, password);
               tr.sendMessage(msg,msg.getAllRecipients());
               tr.close();
               CCLogger.getLogger().log(Level.INFO, "Message sent OK.");

new info it works on 1.5.0_10 but not 1.5.0_06 any ideas?

MailAPI SMTP sending error: 'Could not convert socket to TLS'

I'm stucked with smtp authentication in a project.
The process works on port 25 with no STARTTLS, but unfortunately our company server uses port 587 and STARTTLS.
It seems that only the half of the authentication process could be successful, as the server accepts EHLO, but when it switches to secure the program fails with the exception:
'Could not convert socket to TLS'
The simplified code (from a sample app) is:
public void SendMail() throws Exception{
        Properties props = new Properties();
        props.setProperty("mail.transport.protocol", "smtp");
        props.setProperty("mail.smtp.host", "smtpserver");
        props.setProperty("mail.smtp.port", "587");
        props.setProperty("mail.smtp.auth", "true");
        props.setProperty("mail.smtp.auth.ntlm.domain", "codomain");
        props.setProperty("mail.smtp.starttls.required", "true");
        props.setProperty("mail.smtp.auth.mechanisms", "LOGIN NTLM");
        Session mailSession = Session.getDefaultInstance(props, null);
        mailSession.setDebug(true);
        Transport transport = mailSession.getTransport();
        MimeMessage message = new MimeMessage(mailSession);
        message.setSubject("My subject");
        message.setFrom(new InternetAddress("[email protected]"));
        message.setContent("<h1>Hello world</h1>", "text/html");
        message.addRecipient(Message.RecipientType.TO,
                            new InternetAddress("[email protected]"));
        transport.connect("smtpserver", 587, "CODOMAIN\\myaccount", "mypass");
        transport.sendMessage(message,
        message.getRecipients(Message.RecipientType.TO));
        transport.close();
   }

I'll copy the full message below:
+2010.06.29. 12:03:10 mailapi_2.Main main+
SEVERE: null
javax.mail.MessagingException: Could not convert socket to TLS;+
nested exception is:
javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
at com.sun.mail.smtp.SMTPTransport.startTLS(SMTPTransport.java:1652)
at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:534)
at javax.mail.Service.connect(Service.java:291)
at mailapi_2.SimpleMail.SendMail1(SimpleMail.java:59)
at mailapi_2.Main.main(Main.java:23)
Caused by: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:174)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1591)
at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Handshaker.java:187)
at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Handshaker.java:181)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(ClientHandshaker.java:1035)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(ClientHandshaker.java:124)
at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Handshaker.java:516)
at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Handshaker.java:454)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:884)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1096)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1123)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1107)
at com.sun.mail.util.SocketFetcher.configureSSLSocket(SocketFetcher.java:503)
at com.sun.mail.util.SocketFetcher.startTLS(SocketFetcher.java:443)
at com.sun.mail.smtp.SMTPTransport.startTLS(SMTPTransport.java:1647)
+... 4 more+
Caused by: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
at sun.security.validator.PKIXValidator.doBuild(PKIXValidator.java:285)
at sun.security.validator.PKIXValidator.engineValidate(PKIXValidator.java:191)
at sun.security.validator.Validator.validate(Validator.java:218)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.validate(X509TrustManagerImpl.java:126)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(X509TrustManagerImpl.java:209)
Could not convert socket to TLS
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(X509TrustManagerImpl.java:249)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(ClientHandshaker.java:1014)
+... 14 more+
Caused by: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
at sun.security.provider.certpath.SunCertPathBuilder.engineBuild(SunCertPathBuilder.java:174)
at java.security.cert.CertPathBuilder.build(CertPathBuilder.java:238)
at sun.security.validator.PKIXValidator.doBuild(PKIXValidator.java:280)
+... 20 more+
And the output panel before the exception:
Sending mail...
DEBUG: setDebug: JavaMail version 1.4.3
+DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]+
DEBUG SMTP: useEhlo true, useAuth true
DEBUG SMTP: trying to connect to host "smtpserver", port 587, isSSL false
+220 exch.plt.local Microsoft ESMTP MAIL Service ready at Tue, 29 Jun 2010 12:03:08 +0200+
DEBUG SMTP: connected to host "smtpserver", port: 587
EHLO machine.codomain.local
+250-smtpserver.codomain.local Hello [xxx.xxx.xxx.xxx]+
+250-SIZE 15728640+
+250-PIPELINING+
+250-DSN+
+250-ENHANCEDSTATUSCODES+
+250-STARTTLS+
+250-AUTH GSSAPI NTLM+
+250-8BITMIME+
+250-BINARYMIME+
+250 CHUNKING+
DEBUG SMTP: Found extension "SIZE", arg "15728640"
DEBUG SMTP: Found extension "PIPELINING", arg ""
DEBUG SMTP: Found extension "DSN", arg ""
DEBUG SMTP: Found extension "ENHANCEDSTATUSCODES", arg ""
DEBUG SMTP: Found extension "STARTTLS", arg ""
DEBUG SMTP: Found extension "AUTH", arg "GSSAPI NTLM"
DEBUG SMTP: Found extension "8BITMIME", arg ""
DEBUG SMTP: Found extension "BINARYMIME", arg ""
DEBUG SMTP: Found extension "CHUNKING", arg ""
STARTTLS
+220 2.0.0 SMTP server ready+

Quicktime does not convert my .MOV file into a watchable format on Quicktime

Hi guys!
I won't give you all a long sob story but basically, I went to my first music festival over the weekend and uploaded my videos onto my friends computer, I then uploaded these videos (i took with my iPhone) to Google Drive. When i got back onto my own computer, I download the .MOV files from Google Drive, these videos would not convert into a watchable format. It gives me the message -
"QuickTime Player can't open "IMG_8788.MOV". To see if additional software is available that will enable QuickTime Player to open the movie, click Tell Me More."
It says that Quicktime should support MOV files. I am using version 10.3 Quicktime player with iOS Mavericks. I really want help with this issue as I will be devastated if these videos are lost. My friend obviously deleted them off his computer because they did take up alot of space!

I won't give you all a long sob story but basically, I went to my first music festival over the weekend and uploaded my videos onto my friends computer, I then uploaded these videos (i took with my iPhone) to Google Drive. When i got back onto my own computer, I download the .MOV files from Google Drive, these videos would not convert into a watchable format. It gives me the message -
"QuickTime Player can't open "IMG_8788.MOV". To see if additional software is available that will enable QuickTime Player to open the movie, click Tell Me More."
It says that Quicktime should support MOV files. I am using version 10.3 Quicktime player with iOS Mavericks. I really want help with this issue as I will be devastated if these videos are lost. My friend obviously deleted them off his computer because they did take up alot of space!
iPhone recorded files should already be compatible QT X v10.3 (and QL) as is in the MOV file container. However, the process of downloading, uploading, and again downloading the files may have created some sort of issue causing QT X to not properly "recognize" the content and thus, wants you to check for additional support.
In any case, will the files open in any other media players? (E.g., VLC, MPlayerX, NicePlayer, QT 7, MPEG Streamclip, etc.) For instance, if the files open in QT 7 Pro, MPEG Streamclip, or VLC, you may be able to copy the data to a new MOV file container which QT X will open and play. (I.e., this procedure does not recompress the data and is reasonable quick. Also not sure if using the "Command-D" Finder option to "duplicate" the file will create a "readable" file or not but you might try it.)

Some JMS objects do not show up in JNDI tree

Hello friends. I have a situation where some of my JMS Queues do not show up in
the JNDI tree. Other Queues / Topics show up fine. I cannot find any difference
in the interface that tells me what my cause this to happen. Any insight would
be appreciated.
brian

are you using a cluster? if so check the multicast to see if its working
right.
Where are you looking up the JNDI tree? in the console or are you checking
the JNDI tree via weblogic.Admin LIST command? the LIST command may be a
better way to see it for sure.
sree
"Brian" <[email protected]> wrote in message
news:40b74519$1@mktnews1...
>
Hello friends. I have a situation where some of my JMS Queues do not showup in
the JNDI tree. Other Queues / Topics show up fine. I cannot find anydifference
in the interface that tells me what my cause this to happen. Any insightwould
be appreciated.
brian

The bullet list, numbered list and the normal text is not converting when I am converting from RH 9 to MS Word 2010

Hi all,
Greetings for the day
I am created a new CSS in Robohelp 9. I have also created a new template in Word 2010. The style sets for different information elements like (Heading, bullets, body text, ) are more or less same between the CSS and the new templates. I am also able to map the .css styles to Word template when I am converting from RH to Word as I am getting the necessary option in the drop-down list.
However, when the output is generated, the bullet, the numbered list and the body text is not converting at all. The body text works sometimes. However, the numbered list and bullet list is coming out as images.
If anybody knows the solution, I can share the .css and Word template.
Thanks in advance.
Regards,
Parag Deb

Create a new project with two or three topics containing lists of both types. Generate a printed output that shows the problem. Then zip it up and send it to me. See the Contact page on my site for instructions.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

AP Account Analysis Report USD not converting to Functional Currency

When I am running AccountAnalysis Report , USD not converting to SGD\
08-JUN-09 3D NETWORKS SINGAPORE PTE TI10050729 Invoice Nonrecoverable GST Yes
USD 8,395.36 8,395.36 530000844
Regards,
Ajit
Edited by: Ajit Raut on Jul 27, 2009 8:10 PM

Resolved,
==============================================
Please find below notes;
Not all reports are appropriate to run under MRC responsibility.
The reports that do not have set of books as parameter cannot show thedata in reporting currency as
sob is not supplied. So all such reportsnot having set of books parameter cannot be expected to show
the outputin reporting currency.
Refr to the document "Multiple Reporting Currencies in Oracle Applications"
Appendix A: MRC Reporting Responsibilities:
Section Request Groups (page A-8)
Extract from the document:
The predefined MRC request groups allow you to access only those reports
and programs that are "appropriate" to run when using a reporting responsibility.
Pre–defined MRC request groups are in the format MRC Programs <product code>.
Payables
=======
The following reports are available in the MRC Programs AP request group:
• Accounts Payable Trial Balance Report
• Posted Invoice Register
• Posted Payment Register
• Posting Hold Report
• Transaction Reconciliation Report
• Journal with GL Details Report

I want to create a document/spreadsheet (whichever) that I can send to agencies to type in information for work projects. Any ideas? I have an Excel file but it does not convert over very well and I am having trouble making changes to it.

Need to create a new spreadsheet or be able to edit the one I have.
I use this spreadsheet as a work order form for social service agencies. They enter name address etc., and then there are various work projects that they can select as well.
The one I have from the organization I work with is an excel file but it does not convert over very well. Instead of being 7 pages it is more like 11 or so because things run off the page. I am trying to delete certain things and move them over but not working out very well so thought it might be easier to start over fresh.
Is numbers the program to use? If so, any useful tips?

If the form is going to be used on an iPad, Numbers is the only game in town.
Numbers is available for Macs only (and iOS devices). Excel is available for PCs and Macs. If you are in a mixed environment of Windows PCs and Macs and you are using this document as an electronic form, Excel is probably the better choice. Otherwise you will need to export to Excel for the PC users then import from Excel to retrieve their data. The import/export process is not perfect. A file that has been exported then reimported will not be the same as the original file. I would assume social services agencies are almost entirely PC-based.
If the form is to be printed or turned into a PDF for distribution and use by the social services agencies, either Excel or Numbers would do the job but right now Excel might be the better choice. I would have recommended Numbers '09 but I cannot recommend Numbers 3 for anything thsat requires printing until they give us the layout and printing functionality we used to have (editing in Print View, ability to set margins, etc).
If everything else in your department/operation/agency is Windows PC and Microsoft Office based, you would be better off sticking with the standard.
I hope that helps.

JMS Correlation ID not converting to EBCDIC Hexa

Similar Messages

Maybe you are looking for