JMS Listener update user

I am using IDM 8.1. I've setup the JMS Listener to activesync queue message to Sun IDM repository.
I found that, it will consider any incoming queue message as create user request even I've checked the Create Unmatched Accounts in synchronization policy. Do anyone get the idea how to make the adapter launch the create / update process correctly? I've try added activeSync.diffAction value as one of the parameter in the incoming message but it fail, too.
Thx!

You need to set up a correlation rule for the adapter to correlate active sync updates to existing accounts.

Similar Messages

How do you make Mozilla listen to users and stop FFFFirefox Auto Updating despite being set to NOT auto update?

I am spitting nails
After all the STUPID problems outlined here
https://support.mozilla.org/en-US/questions/999831?esab=a&s=&r=0&as=s
I set Firefox to stop auto updating,
Then the other day I installed a new user on my laptop, when they loaded Firefox it auto updated MY version of Firefox.
Has NOTHING been learnt?
STUPID STUPID STUPID STUPID STUPID
So I have 2 questions
How do you make Mozilla listen to users?
and how do prevent what happened to me happening again?

SuperSluether
Not a millionth, you have only provided 150 answers and I doubt they were all this issue.
If you don't like it, don't use it.
If a business took this attitude they would soon be out of business
Updates help KEEP YOU SAFE
Sometimes, but in my experience FFirefox updates can really screw up your system, lose you data, mess up your user interface. I have run IT for one of the biggest intranets on the planet and we never allowed even Mictosoft updates until we did User Acceptance Testing and understood the impact of the upgrade. I am a grown up not a child, I have system where I test updates for performance, security and impact, I WILL DECIDE when I want to install it. If Mozilla wants to provide real security updates I would take them but if you look at the link in my OP you will see it said an update was security and it completely messed up.
Updates add tons of great new features
Actually with FFirefox in my experience they take more away than they add, things I did not ask them to take, they do not look at my config and leave my settings as they were and then tell me about new options, no they completely screw my productivity as it takes days to figure out how to undo the kwap they have added. Copying the AWFUL Chrome interface is not an improvement, Google has one of the worst UI's on the planet accross all their products.
Firefox is designed to be customized PER USER, NOT CROSS-SYSTEM
There are some things that benefit from being per user and some that are per machine, windows has group policies per machine and per user. My OP is telling Mozilla that this is another area where they have "designed" badly, I tell them this so that they improve it and in the vain hope that there is some config setting that will stop this nonsense.
So SuperSluether you have not really helped, all you seem to say is FO if you do not like it. Good job you do not run a business. With that attitude probably best you do not contribute.

While updating user Details I am gettingsome error

Hi ,
While updating the user details from OIM server(OIM 9102 BP12) I am getting following error.Same is working properly on BP02.Can anybody help me to find out what is the root cause of this problem?
- I am trying to ceare a user through PSFT test utility, and getting following error.Same error is coming when we are creating user from
OIM server console.
Running GETROGUEACCOUNTSAMACCOUNTNAME
Target Class = com.thortech.xl.utilities.rogueAccountDetect
$$$ Rogue Account Detect $$$
The reconType query is: select obj_name from obj where obj_key=(select obj_key from rce where rce_key=38784)
$$$ Recon Object is: Xellerate User
$$$ wrong recon type for rogue account detect
tcDeptCodeChanged Running
Nr Name Value
0) Lookup Name Department SiteCode Mapping
1) From Field USR_UDF_DEPARTMENT_ID
2) To Field USR_UDF_SITECODE
3) Debug YES
4) SMTP Server 10.53.12.18
5) Email To [email protected]
6) Email From [email protected]
7) Trigger Field USR_UDF_SITECODE
8) Disable Resource RACF,RACF IMS_TMCC (AutoProvision)
9) ID Field UD_RACF_ID,UD_IMSB_ID
10) Resource Object RACF IMS_TMCC (AutoProvision)
11) RO Form UD_RACFUSRO
12) Field 01 Name UD_RACFUSRO_CREATE_IND
13) Field 01 Value RACF_CREATE
14) Field 02 Name UD_RACFUSRO_USER_TYPE
15) Field 02 Value IMS_TMCC
16) Translate Email Def Department Code Lookup Error
17) RBAC Job Codes List RBAC Job Codes
18) RBAC Departments List RBAC Departments
19) Job Code Field USR_UDF_JOB_CODE
SMTP Server : 10.53.12.18
Email To : [email protected]
Email From : [email protected]
Lookup Name : Department SiteCode Mapping
From Field : USR_UDF_DEPARTMENT_ID
Translate Email Def : Department Code Lookup Error
To Field : USR_UDF_SITECODE
t c D e p t C o d e C h a n g e d
User: ()
Old Department Code:
New Department Code: 064010
G E T U S E R R E S O U R C E
This is a create
More than one User Record Found, most likely a create
Number of Users: 12843
G E T L O O K U P D E F I N I T I O N S
Lookup rows: 210
Nr Name Value
E V A L U A T E F I E L D D A T A
*ACT: :
*OLD: :
*NEW: 064010 : 014
OLD VALUE NOT FOUND IN LOOKUP!
U P D A T E S I T E C O D E F I E L D
Running MANAGERSEARCHCONDITIONS
Target Class = com.thortech.xl.util.adapters.tcUtilHashTableOperations
Running FINDMANAGER
Running GETMANAGERCOUNT
Running GETMANAGERKEY
Running GENUNIQID
Target Class = com.thortech.xl.utils.tcUserData
<TMS 101> Flag:<Both> Checking for user in AD: khanz at server: <10.49.61.101>
<TFS 185> Flag :<Both> Checking for user in AD: khanz at server:<10.49.61.101>
Running CREATEGETUSERMAP
Target Class = com.thortech.xl.util.adapters.tcUtilHashTableOperations
Running GETUSER
Running Create Update User Map
Running Update Update User Map
Running UPDATEUSER
tcDeptCodeChanged Running
Nr Name Value
0) Lookup Name Department SiteCode Mapping
1) From Field USR_UDF_DEPARTMENT_ID
2) To Field USR_UDF_SITECODE
3) Debug YES
4) SMTP Server 10.53.12.18
5) Email To [email protected]
6) Email From [email protected]
7) Trigger Field USR_UDF_SITECODE
8) Disable Resource RACF,RACF IMS_TMCC (AutoProvision)
9) ID Field UD_RACF_ID,UD_IMSB_ID
10) Resource Object RACF IMS_TMCC (AutoProvision)
11) RO Form UD_RACFUSRO
12) Field 01 Name UD_RACFUSRO_CREATE_IND
13) Field 01 Value RACF_CREATE
14) Field 02 Name UD_RACFUSRO_USER_TYPE
15) Field 02 Value IMS_TMCC
16) Translate Email Def Department Code Lookup Error
17) RBAC Job Codes List RBAC Job Codes
18) RBAC Departments List RBAC Departments
19) Job Code Field USR_UDF_JOB_CODE
SMTP Server : 10.53.12.18
Email To : [email protected]
Email From : [email protected]
Lookup Name : Department SiteCode Mapping
From Field : USR_UDF_DEPARTMENT_ID
Translate Email Def : Department Code Lookup Error
To Field : USR_UDF_SITECODE
tcDeptCodeChanged: new and old field value is same, returning
tcJobCodeStatusChanged Running
0) Trigger Field USR_UDF_JOB_CODE
1) Debug YES
2) Request Key Resource AD User
3) Request Key Field UD_ADUSER_REVOKE_REQ_KEY
4) RACF B User ID Field UD_ADUSER_B_USERID
5) RACF T User ID Field UD_ADUSER_T_USERID
6) RACF I User ID Field UD_ADUSER_I_USERID
7) RACF B Resources RACF IMS_TMCC (AutoProvision)
8) RACF I Resources RACF IMS_TMIS (AutoProvision)
9) RACF T Resources RACF TSO_TMCC_NP (AutoProvision),RACF TSO_TMIS_NP (AutoProvision)
10) Common Resources Lotus Notes,LAN,Internet,Stars,Focus
11) Exclusion List Lookup.Object Exclusion List
12) Other Delete Resources Lookup.Other Delete Resources
13) RBAC Job Codes List RBAC Job Codes
14) RBAC Departments List RBAC Departments
Trigger Field : USR_UDF_JOB_CODE
newFieldValue 99O109 oldFieldValue 99O109
terminationFlag 0 oldTerminationFlag 0
processFlag N
tcJobCodeStatusChanged: new and old field value is same, returning
ERROR,28 Dec 2010 05:49:05,199,[XELLERATE.SERVER],Class/Method: tcDataObj/eventPostUpdate encounter some problems: com.thortech.xl.dataobj.util.tcProvPolicyUtils
java.lang.InstantiationError: com.thortech.xl.dataobj.util.tcProvPolicyUtils
at com.thortech.xl.client.events.tcUSRevaluatePolicies.evaluatePolicies(Unknown Source)
at com.thortech.xl.client.events.tcUSRevaluatePolicies.implementation(Unknown Source)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcUSR.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.updateUserData(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.updateUser(Unknown Source)
at com.thortech.xl.ejb.beans.tcUserOperationsSession.updateUser(Unknown Source)
at com.thortech.xl.ejb.beans.tcUserOperations_voj9p2_EOImpl.updateUser(tcUserOperations_voj9p2_EOImpl.java:1995)
at Thor.API.Operations.tcUserOperationsClient.updateUser(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
at $Proxy61.updateUser(Unknown Source)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSETBOOLEANVALUES.UPDATEUSER(adpSETBOOLEANVALUES.java:271)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSETBOOLEANVALUES.implementation(adpSETBOOLEANVALUES.java:89)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcORC.insertNonConditionalMilestones(Unknown Source)
at com.thortech.xl.dataobj.tcORC.completeSystemValidationMilestone(Unknown Source)
at com.thortech.xl.dataobj.tcORC.postInsertSysVal(Unknown Source)
at com.thortech.xl.dataobj.tcORC.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.util.tcOrderPackages.createProcessORC(Unknown Source)
at com.thortech.xl.dataobj.util.tcOrderPackages.createOrder(Unknown Source)
at com.thortech.xl.dataobj.util.tcOrderPackages.createOrder(Unknown Source)
at com.thortech.xl.dataobj.util.tcOrderPackages.orderPackageForOrganization(Unknown Source)
at com.thortech.xl.dataobj.tcOIO.provision(Unknown Source)
at com.thortech.xl.dataobj.tcOIO.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcOrgProvisionObject.insertImplementation(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcUSR.orderUserProcess(Unknown Source)
at com.thortech.xl.dataobj.tcUSR.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcRCE.createUserRecord(Unknown Source)
at com.thortech.xl.dataobj.tcRCE.applyActionRules(Unknown Source)
at com.thortech.xl.dataobj.tcRCE.checkDataSorted(Unknown Source)
at com.thortech.xl.dataobj.tcRCE.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcRCE.finishDataReceived(Unknown Source)
at com.thortech.xl.schedule.jms.reconOffline.ProcessOfflineReconMessages.finishReconciliationEvent(Unknown Source)
at com.thortech.xl.schedule.jms.reconOffline.ProcessOfflineReconMessages.execute(Unknown Source)
at com.thortech.xl.schedule.jms.messagehandler.MessageProcessUtil.processMessage(Unknown Source)
at com.thortech.xl.schedule.jms.messagehandler.ReconMessageHandlerMDB.onMessage(Unknown Source)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4547)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4233)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3709)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:114)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5058)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
ERROR,28 Dec 2010 05:49:05,207,[XELLERATE.SERVER],Class/Method: tcDataObj/save Error :Data Update Failed
ERROR,28 Dec 2010 05:49:05,210,[XELLERATE.DATABASE],Class/Method: tcDataBase/rollbackTransaction encounter some problems: Rollback Executed From
java.lang.Exception: Rollback Executed From
at com.thortech.xl.dataaccess.tcDataBase.rollbackTransaction(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.rollback(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.doRollback(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.updateUserData(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.updateUser(Unknown Source)
at com.thortech.xl.ejb.beans.tcUserOperationsSession.updateUser(Unknown Source)
at com.thortech.xl.ejb.beans.tcUserOperations_voj9p2_EOImpl.updateUser(tcUserOperations_voj9p2_EOImpl.java:1995)
at Thor.API.Operations.tcUserOperationsClient.updateUser(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
at $Proxy61.updateUser(Unknown Source)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSETBOOLEANVALUES.UPDATEUSER(adpSETBOOLEANVALUES.java:271)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSETBOOLEANVALUES.implementation(adpSETBOOLEANVALUES.java:89)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcORC.insertNonConditionalMilestones(Unknown Source)
at com.thortech.xl.dataobj.tcORC.completeSystemValidationMilestone(Unknown Source)
at com.thortech.xl.dataobj.tcORC.postInsertSysVal(Unknown Source)
at com.thortech.xl.dataobj.tcORC.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.util.tcOrderPackages.createProcessORC(Unknown Source)
at com.thortech.xl.dataobj.util.tcOrderPackages.createOrder(Unknown Source)
at com.thortech.xl.dataobj.util.tcOrderPackages.createOrder(Unknown Source)
at com.thortech.xl.dataobj.util.tcOrderPackages.orderPackageForOrganization(Unknown Source)
at com.thortech.xl.dataobj.tcOIO.provision(Unknown Source)
at com.thortech.xl.dataobj.tcOIO.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcOrgProvisionObject.insertImplementation(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcUSR.orderUserProcess(Unknown Source)
at com.thortech.xl.dataobj.tcUSR.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcRCE.createUserRecord(Unknown Source)
at com.thortech.xl.dataobj.tcRCE.applyActionRules(Unknown Source)
at com.thortech.xl.dataobj.tcRCE.checkDataSorted(Unknown Source)
at com.thortech.xl.dataobj.tcRCE.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcRCE.finishDataReceived(Unknown Source)
at com.thortech.xl.schedule.jms.reconOffline.ProcessOfflineReconMessages.finishReconciliationEvent(Unknown Source)
at com.thortech.xl.schedule.jms.reconOffline.ProcessOfflineReconMessages.execute(Unknown Source)
at com.thortech.xl.schedule.jms.messagehandler.MessageProcessUtil.processMessage(Unknown Source)
at com.thortech.xl.schedule.jms.messagehandler.ReconMessageHandlerMDB.onMessage(Unknown Source)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4547)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4233)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3709)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:114)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5058)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

Search on metalink for the following error to see lots of documents related to this error and the specific solution.
[XELLERATE.SERVER],Class/Method: tcDataObj/eventPostUpdate encounter some problems: com.thortech.xl.dataobj.util.tcProvPolicyUtils
java.lang.InstantiationError: com.thortech.xl.dataobj.util.tcProvPolicyUtils

Deadlock in TopLink when using JMS listener on WebLogic

I am experiencing a deadlock in TopLink 10.1.3 on WebLogic 9 in code that previously worked on TopLink 9.0.4 with WebLogic 8.1. As such, I'm not sure if it's due to the TopLink change, the WebLogic change or both. Anyway, we have a JMS listener (note, NOT a MessageDrivenBean) that is updating an existing TopLink cached domaing object. The JMS listener thread gets stuck when attempting to commit the transaction. The thread-dump shows that there is another thread which is blocked in the ConcurrencyManager waiting to obtain the lock on an object which is being updated by the listener thread. It appears to me that the root cause is that the Synchronization.afterCompletion() listener is running on a different thread than the one which owns the locks which were obtained beforeCompletion.
See stack traces.
First, the message listener thread which is waiting for participants in the transaction to commit:
"[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=9 tid=0x3a4a4728 nid=0xa48 in Object.wait() [0x3a0cf000..0x3a0cfbec]
     at java.lang.Object.wait(Native Method)
     - waiting on <0x0c7a0908> (a weblogic.transaction.internal.ServerTransactionImpl)
     at weblogic.transaction.internal.ServerTransactionImpl.globalRetryCommit(ServerTransactionImpl.java:2665)
     - locked <0x0c7a0908> (a weblogic.transaction.internal.ServerTransactionImpl)
     at weblogic.transaction.internal.ServerTransactionImpl.globalCommit(ServerTransactionImpl.java:2570)
     at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:277)
     at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:226)
     at weblogic.ejb.container.internal.BaseEJBObject.postInvoke1(BaseEJBObject.java:539)
     at weblogic.ejb.container.internal.StatelessEJBObject.postInvoke1(StatelessEJBObject.java:72)
     at weblogic.ejb.container.internal.BaseEJBObject.postInvokeTxRetry(BaseEJBObject.java:374)
     at com.avinamart.BusinessLogic.Bean.JobService.JobService_u1ylwo_EOImpl.submitJobAndRun(JobService_u1ylwo_EOImpl.java:1388)
     at com.avinamart.Framework.Event.Task.OptimizationTaskListener._submitAsAJob(OptimizationTaskListener.java:253)
     at com.avinamart.Framework.Event.Task.OptimizationTaskListener._submitAsAJob(OptimizationTaskListener.java:217)
     at com.avinamart.Framework.Event.Task.OptimizationTaskListener.processMessage(OptimizationTaskListener.java:344)
     at com.emptoris.base.event.EPASSMessageBaseListener.onMessage(EPASSMessageBaseListener.java:722)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:3824)
     at weblogic.jms.client.JMSSession.execute(JMSSession.java:3738)
     at weblogic.jms.client.JMSSession.pushMessage(JMSSession.java:3253)
     at weblogic.jms.client.JMSSession.invoke(JMSSession.java:4195)
     at weblogic.messaging.dispatcher.Request.wrappedFiniteStateMachine(Request.java:674)
     at weblogic.messaging.dispatcher.DispatcherServerRef.invoke(DispatcherServerRef.java:262)
     at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:134)
     at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:36)
     at weblogic.messaging.dispatcher.DispatcherServerRef$1.run(DispatcherServerRef.java:105)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
Next, the other thread which is participating in the transaction which is stuck:
"[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=5 tid=0x3adb80a0 nid=0xb30 in Object.wait() [0x3c7af000..0x3c7afd6c]
     at java.lang.Object.wait(Native Method)
     - waiting on <0x0c7a0000> (a oracle.toplink.internal.helper.ConcurrencyManager)
     at java.lang.Object.wait(Object.java:474)
     at oracle.toplink.internal.helper.ConcurrencyManager.acquire(ConcurrencyManager.java:76)
     - locked <0x0c7a0000> (a oracle.toplink.internal.helper.ConcurrencyManager)
     at oracle.toplink.internal.identitymaps.CacheKey.acquire(CacheKey.java:80)
     at oracle.toplink.internal.identitymaps.FullIdentityMap.remove(FullIdentityMap.java:164)
     at oracle.toplink.internal.identitymaps.HardCacheWeakIdentityMap.remove(HardCacheWeakIdentityMap.java:82)
     at oracle.toplink.internal.helper.WriteLockManager.releaseAllAcquiredLocks(WriteLockManager.java:363)
     at oracle.toplink.publicinterface.UnitOfWork.afterTransaction(UnitOfWork.java:2123)
     at oracle.toplink.transaction.AbstractSynchronizationListener.afterCompletion(AbstractSynchronizationListener.java:135)
     at oracle.toplink.transaction.JTASynchronizationListener.afterCompletion(JTASynchronizationListener.java:66)
     at weblogic.transaction.internal.ServerSCInfo.callAfterCompletions(ServerSCInfo.java:862)
     at weblogic.transaction.internal.ServerTransactionImpl.callAfterCompletions(ServerTransactionImpl.java:2913)
     at weblogic.transaction.internal.ServerTransactionImpl.afterCommittedStateHousekeeping(ServerTransactionImpl.java:2806)
     at weblogic.transaction.internal.ServerTransactionImpl.setCommittedUnsync(ServerTransactionImpl.java:2857)
     at weblogic.transaction.internal.ServerTransactionImpl.ackCommit(ServerTransactionImpl.java:1097)
     - locked <0x0c7a0908> (a weblogic.transaction.internal.ServerTransactionImpl)
     at weblogic.transaction.internal.CoordinatorImpl.ackCommit(CoordinatorImpl.java:211)
     at weblogic.transaction.internal.CoordinatorImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:517)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:407)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:403)
     at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:56)
     at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicServerRef.java:934)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
Is this the same concurrency bug which was fixed in 10.1.3.1??? As I am writing this, I am attempting to build the application with the updated TopLink jar to test for myself. Has anyone else seen this scenario with WebLogic? I should also point out that the problem only occurs when the listener is running on a separate server than the one hosting the JMS queue it reads from. It may be that when the listener runs on the same server, it does not use multiple threads in the transaction.
Any ideas are greatly appreciated.
- Bruno

We've got the same kind of issue with toplink 10.1.3.0.0 and bea weblogic 8.1 SP5.
I 've not tried with 10.1.3.1.0, did you?
Do you have a new status for this issue.
Chris

JMS Listener within a workflow

I have a JMS listener, waiting for new messages on a queue. Once there is a new message it uses that message which contains an object to begin the work flow process. The first step in the work flow calls an external engine we built that does quite a bit. At each critical point in the engine it adds a message to a topic. I want to have a listener for each one of the steps that will listen for the results to be added to the topic. Once it's there if everything is good go to the next listener and wait for the next result set. If it's bad I want to take the results and send the message to another queue and end that work flow. I'm not having much luck finding how to put a listener within the work flow. I have the listener that starts the process going fine using a Global Automatic event.
I thought the best solution would be do a subflow process at each points of them listeners. Have another global automatic event listener waiting which will then start the subflow process which stores the results and then returns which step to take back to the original process. But that didn't work it was completing all of the subflow's w/o waiting for a listener to find a message. So nothing ended up happening.
Any help?

That's what I figured with that global interactive I was trying to access the instance variables before so it wasn't showing up under my user. Now instead of an error pop up the error message shows up at the bottom of the runtime UI.
Error at bottom of page: (Followed by a bunch of package names)
Unexpected Error
javax.faces.el.EvaluationException: /jsf/menu/menuActionNormal.xhtml @24,147 onActivate="#{componentBean.doExecuteAction}": fuego.papi.exception.InvalidTaskNumberException: Invalid task number '0' for activity '/Manager#Default-1.0/Global'.
Warning in the Log:
There was an error when trying to obtain the environement information: null
Application: Engine, Module: Main, Thread: <0> StartUpServerIt gives me the top error when I have the notification set up to receive an external notification and gives me the warning for both cases either external notification or internal event. Its an internal event but in the documentation it never covers internal event situations for NotificationWait so I tried both.
Another thing is when I have 2 or more instances waiting at the wait how does it know which one to go too? In the real example it will be receiving an object from the thread that will have an id number. But in this little test set up how does it know which instance the global activity is for?

JMS Listener configuration problem

I am installing IDM6.0 and trying to use the password synch feature with Active Directory. Below are my environment details
tomcat 5.0.28 on linux
Sun Message Queue 3.6 for JMS
When I am configuring the JMS Listener adapter I am getting the below error. I have installed the Sun Message Queue and storing the administered objects in a file.
Test connection failed for resource(s):
JMS Listener: javax.naming.NameNotFoundException
If anyone has ever done that earlier it will be very helpful for me.
Thanks in advance

Just an update on my last comment
I had tested this on the windows box. The problem may not be there in the Linux

JMS Listener Bug??

I am implementing SIM 7.0 and have enabled a JMS Listener resource. The resource works well and we have no issues with it.
The problem is when you try to edit the Synchronization policy for the JMS Listener and then cancel it without saving i.e.
1. Select the JMS Listener
2. Edit Synchronization Policy
3. Cancel the dit, you need not change anything
This throws a Task may have been deleted error. Can someone help me with solving this issue?
I have been trying to raise this as a bug but have not been successful. Can someone help me with how to report a bug. I went to the Bugs Reporting page but could not determine the proper set of options to pick to report a bug with the JMS Listener resource on Sun IdM.

That's what I figured with that global interactive I was trying to access the instance variables before so it wasn't showing up under my user. Now instead of an error pop up the error message shows up at the bottom of the runtime UI.
Error at bottom of page: (Followed by a bunch of package names)
Unexpected Error
javax.faces.el.EvaluationException: /jsf/menu/menuActionNormal.xhtml @24,147 onActivate="#{componentBean.doExecuteAction}": fuego.papi.exception.InvalidTaskNumberException: Invalid task number '0' for activity '/Manager#Default-1.0/Global'.
Warning in the Log:
There was an error when trying to obtain the environement information: null
Application: Engine, Module: Main, Thread: <0> StartUpServerIt gives me the top error when I have the notification set up to receive an external notification and gives me the warning for both cases either external notification or internal event. Its an internal event but in the documentation it never covers internal event situations for NotificationWait so I tried both.
Another thing is when I have 2 or more instances waiting at the wait how does it know which one to go too? In the real example it will be receiving an object from the thread that will have an id number. But in this little test set up how does it know which instance the global activity is for?

MessageConsumer.receive() Vs JMS Listener

Guys,
Just wondering if MessageConsumer.receive() is better option than the MessageListener.
I have a situation where I am writing a code that is in a common module for an internal application. I need to write a consumer where the consumer can be configured with minimum values as parameters like ContextFactory, Provider URL, Destnation Name, I need to pick the message from that destination.
Here the problem is if I use the JMS Listener then we need to wait untill message arrives and this may keep the thread blocked for hours. Sisce it is purly going to be plugable JMS providers, I am planning to use the receiveNoWait() and process the queue. Pick the message only if available. Otherwise, no messages are picked and the user can retry after some time.
Please comment.
Regards,
Reflex

I am in the middlle of enhancement of an old system to add the JMS feature to it.
Ya, It is a batch processing system where users put a configuration file on with similar kind of jobs in some sequence. The jobs can be doing some basic java tasks.
For example, if you want to subscribe from JMS topic on any server, may be at 10:00 AM every business day. After that you want to send the content as a Email to set of users and then again put it in a different queue. then all you need to just put the configuration of the process in sequence. Thats it. The system can schedule it and do it for us.
The JMS receiver process is just one processors in our sequence. We have around 100 similar processes for internal use. We have around half a million users and 5000 such sequences running round the clock.
In my case I cannot have an MDB because of the fact that the Topics/Queues are totally ad-hoc in nature. To make it cross platform we need to strictly use JMS Specification and cannot really on vendor specific code.
Now, I am bit confused in my choice of using an appropriate adapter. Should I go for JMS Listener or a MessageConsumer's receive() Method.
Note_: All sequences are run in seperate threads.
Regards,
Reflex

Configuration of Password Sync & JMS Listener in fail over in SUN IDM 7.1

HI All,
We are having a set up with IDM running on two Sun application servers pointed to single repository. Sun webserver Reverse Proxy has configured for load balancing.
We have configured JMS Listener adapter for Password Sync and JMS Listener Sync is running on Instance1*
and I copied a copy of .bindings file from Instance1 to Instance2 (I doubt whether this is correct or not) by keeping in mind about load balancing with Reverse Proxy.
Issue
Some times the JMS Listener Sync running on Instance1 is hanging (no polling is happening) and password changes are not happening. To make password changes happen, we are restarting Application server of Instance1 and with this some password are failing to synchronize.
I want to configure High availability or Failover to overcome the above issue.
[http://docs.sun.com/source/819-6123/IDM_admin_passwordsync.html#wp25192] not having any detailed steps to configure failover.
Please provide valuable suggestions
Thanks In Advance
Madhu

The problem appears to be machine account password changes that pass null or corrupted values. Machine accounts are like users, but the password change occur automatically between machine and DC so that the client can be a member of the domain.
We turned up the Password Sync logging were able to see the machine name that occurred before each event, and then researching those machines identified them as NT 4.0 workstations. It turns out that NT 4.0 machines cycle their password every 7 days, down to the second. To say that we were surprised to find these machines still on the network was an understatement.
Contact support for this issue. They have been working on a patch for this.
Jason

Securing the Peoplesoft JMS listening connector URL

In order to start or stop the JMS listening connector we execute a URL on the browser; the URL looks like..
http://<WEBSERVER>:<PORT>/PSIGW/JMSListeningConnectorAdministrator?Activity=START
http://<WEBSERVER>:<PORT>/PSIGW/JMSListeningConnectorAdministrator?Activity=STOP
Problem with this is that any one who knows this can playaround with the listening connector of the production instance; and moreover if he can access the peoplesoft signon page, he can easily know the webserver URL.
Is there any means that this can be secured; for example executing this URL should first take the user to an authentication page..
-Sudripta

on the webserver u can find the .class file here
PS_HOME\webserv\domain_name\applications\peoplesoft\PSIGW\WEB-INF\classes\com\peoplesoft\pt\integrationgateway\listeningconnector
u open this .class file u need a java compiler (or) hex editor to read the content.
Thnks!

User Exit to update user status at VA01/VA02

Hi Expert
Please help identify any User Exit to update User Status stored in tables (JSTO/JEST), at time of sales order (Business Object 2032) creation / change.
Requirement is to set check mark on a specific user status in case of a material master is missing HTS code.
Regards-Aamir

Hi,
If your requirement is to set the check the HTS field in the material master, you can make the field as Mandatory without which the Material cant be saved
You can make this field mandatory in OMS9 transaction code with field status as 89 and the field is MARC-STAWN
Please revert if you need more details
regards,
santosh

STATUS_UPDATE error to update USER STATUS - Update termination error

Hi All,
I am using status_update FM in sales order user exit MV45AFZZ in a perform routine for updating user status in line item for sales order. There are 4 custom statuses created for the sales order line item. 1,2 3, and 4 by configuration. My job is to select one of those based on user selection.
Scenario: During change order process using VA02, I have to change the existing status to a third status when user selects the second one. That is for example, in VA02, user selects status 4 from previous status 3, and save, I have to make the status 4 inactive and save the new status 2 instead of 3 though user selected 3. How do I achieve this.? ????Any programming example is really appreciated. Thanks!!!
I am right now using STATUS_READ and reading the existing status 4. Then making it inactive using status_update FM. And updating the new status 2 as active one and 3 as inactive again. Two inactive updates and one active update is throwing an update termination error while saving the sales order.
Any help is really appreciated.
Thanks
Ricky

Hi ricky,
For saving any changes you need to have a Z-table.
In programs we can't store the user selection. In your case you can create a z-table and store the status there and delete the last status. The process would be faster as you will always have one record in the table.
. One more advantage is you can even track the changes through the Z-table(User who is changing it.)
Hope this solution will surely help you.
Cheers
Suvi

After I updated user for i phone 4 s iCloud password is no way I can not phone and e-mail address has been blocked. I did not bring the solution to Turkey APPLE chief BILKOM is forgotten the password and e-mail address in the e-mail address asking for hel

After I updated user for i phone 4 s iCloud password is no way I can not phone and e-mail address has been blocked. I did not bring the solution to Turkey APPLE chief BILKOM is forgotten the password and e-mail address in the e-mail address asking for help from you I will make the iphone does not open e-mail address associated with it @hotmail.com mail to this address icloud iphone phone's password is forgotten, I want to thank you in advance for your help tell a method of opening up again.
<Email Edited by Host>

Welcome to the Apple Community.
I have asked for your email address to be edited out. Posting your address in an open thread is a sure way to be bombarded by unwanted email, remember it will be here long after you have resolved your problem, for automated detection software to find.
If you want people to contact you, enable others to see your email address in your profile.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID, verify the changes, enter the password as requested on your device and then turn off "find my phone".
You should then change your Apple ID back to its current state, verify it once again, delete the iCloud account from your device and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
Apple Topluluk hoş geldiniz.
Ben düzenlenebilir için e-posta adresi için istedi. Açık bir konu adres gönderme istenmeyen e-posta ile bombardıman bir emin yoludur, bulmak için otomatik algılama yazılımı için, size sorunu giderilmiştir sonra burada uzun olacak unutmayın.
Eğer insanlar sizinle iletişim istiyorsanız, başkalarının profilinizde e-posta adresinizi görmelerini sağlar.
Bu özellik onları çalıntı olduğunu bu işe yaramaz çalıntı telefonları için getirilmiştir.
Ancak aynı zamanda kullanıcı Apple ile Apple ID ayrıntıları değişti ve iCloud hesabı için aynı değişiklik yapmamış ortaya çıkar / iOS 7 yükseltmeden önce cihaz üzerinde My Phone bul olabilir.
Tek çözüm My Apple ID de Apple ile önceki durumuna geri Apple ID değiştirmek için, değişiklikleri doğrulamak cihazınızda talep olarak, şifreyi girin ve sonra kapatın "benim telefon bulmak".
Daha sonra tekrar bugünkü durumuna Apple ID değiştirmek gerekir, bir kez daha doğrulamak cihazınızdan iCloud hesabı silmek ve daha sonra mevcut Apple kimliği kullanarak oturum açın. Son olarak, geri bir kez daha üzerinde "benim telefon bulmak" açın.

Update User Mapping ID api

Hi,
Does anyone know if there is an api to update user mapping ids for users in EP6.0 Portal Database.
I know it can be done in the standard User Import with the inclusion of $usermapping$ but wanted to know of there is a way to do it in a bespoke program to help automate the addition of portal users who will require access to the connected R/3 system (of which there will be many).
Thanks for any help you can offer,
Steve.

Hi Steve
Try the following code.
IPortalComponentRequest req = (IPortalComponentRequest) this.getRequest();
IUserMappingService iumser = (IUserMappingService) PortalRuntime.getRuntimeResources().getService(IUserMappingService.KEY);
IUserMappingData iumdata = iumser.getMappingData("System Alias", req.getUser());
Map map = new HashMap();
try {
    iumdata.enrich(map);
} catch (Exception e) {}
String userid = (String)map.get ("user");
String password = (String)map.get ("mappedpassword");
The following code stores usermapping info.
IPortalComponentRequest req = (IPortalComponentRequest) this.getRequest();
IUserMappingService umapser = (IUserMappingService)
PortalRuntime.getRuntimeResources().getService(IUserMappingService.KEY);
IUser userid = req.getUser();
IUserMappingData iumdata = umapser.getMappingData ("System Alias", userid);
Map map = new HashMap ();
try {
     map.put("user","userid");
         map.put("mappedpassword","password");
        iumdata.storeLogonData(map);
} catch (Exception e) {response.write(e.getMessage());}
Hope this helps.
Regards,
Yoga

How to update users' Trusted Locations settings on open?

I am looking for a function that will trigger on opening of Access 2010 that will automatically update users' Trusted Locations to include the local network. Only authenticated users have access to the drive, so there should be no security
issues in making it a trusted location for anyone who opens the application.
It would be too time consuming to explain to 100+ how to add the network to their trusted locations, so I am looking for something to bypass this.

I put the function into the AutoExec macro, but when the database is not in a trusted location yet, I get a macro error number 2001. After pressing Stop All Macros, then pressing Enable All Content, the function runs and properly adds the location.
Obviously the error occurs because the location is not trusted yet, so how do I get it to trust a macro beforehand?
<v:shapetype coordsize="21600,21600" filled="f" id="_x0000_t75" o:preferrelative="t" o:spt="75" path="m@4@5l@4@11@9@11@9@5xe"
stroked="f"><v:stroke joinstyle="miter"><v:formulas><v:f eqn="if lineDrawn pixelLineWidth 0"><v:f eqn="sum @0 1 0"><v:f eqn="sum 0 0 @1"><v:f eqn="prod @2 1 2"><v:f
eqn="prod @3 21600 pixelWidth"><v:f eqn="prod @3 21600 pixelHeight"><v:f eqn="sum @0 0 1"><v:f eqn="prod @6 1 2"><v:f eqn="prod @7 21600 pixelWidth"><v:f eqn="sum @8 21600
0"><v:f eqn="prod @7 21600 pixelHeight"><v:f eqn="sum @10 21600 0"></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:formulas>
<v:path gradientshapeok="t" o:connecttype="rect" o:extrusionok="f"><o:lock aspectratio="t" v:ext="edit"></o:lock></v:path></v:stroke></v:shapetype><v:shape alt=""
id="Picture_x0020_1" o:spid="_x0000_i1025" style="width:372.75pt;height:229.5pt;" type="#_x0000_t75"><v:imagedata o:href="cid:[email protected]" src="file:///C:\Users\ropelen\AppData\Local\Temp\msohtmlclip1\01\clip_image001.png"></v:imagedata></v:shape>

JMS Listener update user

Similar Messages

Maybe you are looking for