JMS picking multiple records

Hi,
I am working with JMS adapter as a sender.
The issue is the adapter is picking multiple records at time, where the requirement is to pick up only one record at a time (ie.., when the record has entered the queue).
The occurence state is already set to 1..1.
Please let me know the possible changes to do .
Thanks and Regards,
Manoj Kumar

Hi,
Check the Sender side structure , and see the below links
/people/alessandro.guarneri/blog/2006/01/04/jms-sender-adapter-handling-too-short-lines
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
content conversion
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
Regards
Chilla

Similar Messages

Display multiple records as sub-sections in the same report.

I am using Crystal Reports (VS-2005).
In a report, I have various sub-sections in the Details section. Each section represents a category and is connected with SQL command which uses LEFT OUTER JOIN.
The first section is the main section and the subsequent sections are the child sections.
Sometimes, a sub-section (other than the first main sub-section) picks multiple records of that category. In this case the report extends to multiple pages. Each report displays one record of this sub-section.
I want to show the the same sub-section multiple times in the same report as opposed to multiple reports that are now automatically generated by Crystal Reports.
How to handle this issue?

This is a .NET programming forum related to Crystal Reports. Your question is best suited for our report design forum below. Also, when you post your question it will be helpful if you use report design terminology. We have elements like Report Header, Page Header, Groups, and Details sections. Just mentioning "sections" doesn't give us a good idea about what you are attempting to do.
Check out the grouping options and see if it helps. You might need to create a formula to help you with your grouping though.
If you like, I can move this to the design forum.
[SAP Crystal Reports Design|SAP Crystal Reports;

Sender JMS Content Conversion - How to process multiple records

Hi All,
I use a Sender JMS Channel with Content Conversion.
My message structure is like this
<root>
<rec> </rec>
<rec> </rec>
</root>
I have fixed length flat file with multiple records.
i have given the parameters FixedFieldLength, FieldNames and StructureTitle.
Which parameter i need to use specify the RecordDelimiter
Because my input file will have more than record
my input file -
xxxx
yyyy
if i dont specify any delimiter value, in the module parameter,then for each newline of the file, a new mesage is created.
<root>
<rec>xxxx</rec>
<root>
<root>
<rec>yyyy</rec>
<root>
But i want the output to be like this
<root>
<rec>xxxx<rec>
<rec>yyyy</rec>
</root>

hi,
You can do your FCC for sender JMS by going through page 5 of this document.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50061bd9-e56e-2910-3495-c5faa652b710

Single Form Erroneously Creating Multiple Records

I've created a form that uses several pages, with different fields of the form on each page. The pages branch from one to the next depending on the choices made by the user, mostly using a regular select list or a radiogroup with submit. The problem I'm having is that some fields are being populated in one record on one page, and then the information entered by the user on the next page, for another column, creates a new record, so that every time a user would be finished making a complete entry into the form, multiple records have been created, with null fields in each from where those fields were populated, but in a different record. How can I make sure that only one record is created by the user each time they use this form?

Basically the way the page is designed is that there are only three main pages the user will see. 1) The login page then 2) The main menu page, and then 3) The page where they input the information that should populate the remainder of the fields in that record in the table.
The login page simply allows the user to access the menu page, and submits no data. The main menu page consists of 5 fields. Three of them are text fields, the fourth is a date field with a date picker. The fifth field is a radiogroup with submit that has 5 options which branch to 5 respective pages. Upon selecting an option from the radiogroup, these fields submit their data to the table and redirect the user to whichever page was designated by their choice.
This brings up the third page. Most of these other 5 pages consist simply of 4 fields; two required select lists, one required textarea field, and one nonrequired textarea field. Anyway, the problem occurs because instead of populating the remaining fields in the same record, each page with information to submit creates a new record.
I realize that the preceding may not be any additional relevant info., but I thought that if anything, there may be a better way to do that anyway. I thought that maybe editing the "Process" in the Page Definition could be where I need to change something, but I'm not sure how.
Right now my "Process Point" is set as "On Submit - After Computations and Validations," and my "Run Process" is set as the default "Once Per Page Visit." These settings are the same on every page on which I have fields that submit data; however, one difference I noticed is in the process editing interface for the initial menu page, the "Name" says "Insert row into USER_INPUT (table name) with a "Type" of "PL/SQL Anonymous Block", whereas all the other pages processes are named "Process row of USER_INPUT" with a type of "Automatic Row Processing (DML)." Am I even close to where I need to be looking to find the solution to this problem? Sorry for the novel I just wrote, but if there's any additional info. I can provide, just let me know.

Table Join brings in multiple records

Hi guys,
I have created a table join for 2 HR master tables to get a view.
When i output the view however it brings in multiple records for each employee.
I have set PERNR as the Key field to join the tables but instead of giving me one instance of employee it picks it up 2 records....and in some cases many more, is their a fix for this?
Thanks

Hi,
Try using a combined primary key;
PERNR, BEGDA and ENDDA
There are more primary keys to be combined but try with this 3.
~BiSu

Read from multiple record stores sequentially

I am a newbie using OEID 3.0 and CloverETL to store some crawled data (using IAS) in the data domain. I am crawling each website in a separate record store, and I've encountered this problem in CloverETL I can't resolve:
So I have multiple record stores (e.g., rs1, rs2,..., rs1000), and what I need to do is to run a graph (the same graph) sequentially for all these record stores, through changing the record store name in "Record Store Reader" component. The graph simply stores the RS data in a data domain. Could you help me how to achieve this? Basically I need a loop to rerun the graph each time through changing the "Record Store Instance" property at each iteration.
Thanks!

I noticed you said you were doing website crawls with IAS (as opposed to CMS or FileSystem crawls). Personally, when crawling website, I always prefer to output the crawl to XML instead of a recordstore. Since webcrawls do not have any CDC mechanism (change data capture) you're really left conducting the whole crawl every time as there is no way to detect website page change to only crawl what's changed incrementally. For FileSystem crawls and CMS crawls, recordstores are very handing in accomplishing and tracking the incremental change.
So, if you do decide, like me, to output to XML for your website crawls, you can forego the RS read and simply use a XML reader to pick up multiple XML files.
HTH,
Dan
http://branchbird.com

Combining multiple records into a single record (View)

Okay so here is my scenerio:
There is a table I have made that details SQL jobs and the various details about them. What i wan't to do is make a view with specific logic implemented. Fields that will be taken across to this view will be: LastRunDate, LastRunTime and Step_Status.
JobName will also be used to define the logic but will not be a column in itself.
What i wan't is an additional column using this logic, called 'DataSet'. For each Dataset there are multiple jobs that are unique to it, so there are multiple records being brought over from the table to view for one particular dataset. For example,
for 'ExampleDataSet' there are three jobs, i wan't it so these jobs are combined and named as 'ExampleDataSet' under a calculated column called 'Dataset'. For the following fields i would like it so that LastRunDate and LastRunTime are the time in whichever
job was last to be intitiated is the date and time set. For Step_Status, there are three possible results, 'Running', 'Failed' or 'Succeeded'. If any of the three jobs are 'Running', then 'Running'. If neither are running yet one has failed then 'Failed'.
Only when all three have succeeded should it then be set to 'Succeeded'.
I hope i have made that clear enough, please feel free to ask any questions if not. I am relatively new to SQL but i thought to at least try least try (I knew it wouldn't work) and it didn't work. But it may give you a better idea of
what i wan't:
CREATE VIEW [dbo].[vw_DataAvailabilityAnalysts] AS
SELECT CASE
WHEN JobName in ('Job1','Job2','Job3') and step_status='Running' THEN 'Running'
WHEN JobName in ('Job1','Job2','Job3') and step_status='Failed' THEN 'Failed'
WHEN JobName in ('Job1','Job2','Job3) and step_status='Succeeded' THEN 'Succeeded'
END as StatusCheck,
CASE WHEN JobName in ('Job1','Job2','Job3') THEN 'ExampleDataSet'
END as DATASET,
LastRunDate,
lastruntime,
step_status,
FROM [CDS_Common].[dbo].[DataAvailability]
Many Thanks,
Plain_Clueless
Plain_Clueless

Okay so here is what my table looks like (Simplified). There are four columns and the data within is extracted via a Stored Procedure.
JobName
LastRunDate
LastRunTime
Step_Status
Job1
11/06/2014
09:30:00
Succeeded
Job1
10/06/2014
09:37:20
Succeeded
Job2
11/06/2014
04:05:00
Succeeded
Job1
09/06/2014
02:17:41
Succeeded
As you can see there are 3 jobs which are all 'Job1'. This jobs are obviously different within the table however this represents that they are jobs which all update the same DataSet within our local warehouse. Whereas Job2 updates a different dataset alltogether.
I wan't to create a view which will alagmate the jobs that are of the same DataSet, which will disclude the column JobName but would create a whole new column that looks like this:
DataSet
LastRunDate
LastRunTime
Step_Status
DataSet2
11/06/2014
04:05:00
Succeeded
DataSet1
11/06/2014
09:30:00
Succeeded
Bascically what this shows you is all the Job 1's combined so they are one record, Amaglamated. The last time any of these jobs were run is the LastRunDate & LastRunTime, which was the first record in the first table provided. Again for Step_Status,
there are three possible results, 'Running', 'Failed' or 'Succeeded'. If any of the three jobs are 'Running', then 'Running' (Absolute). If none of the three jobs are running yet one has failed then 'Failed'. If one has failed yet another is also running then
'Running'.Only when all three have succeeded should it then be set to 'Succeeded'. (This last bit isn't as important).
Hope this clears it up a bit,
Plain_Clueless
Plain_Clueless

Add Multiple records to G/L account group.

Dear ABAP Experts,
i have requirement that is using BDC recording file the Functional People wants to add records to the G/L Account group. The FI consultant gave the recording file, based on the recording file i developed a BDC program. This BDC program will work for single record. After creating single record system will ask for transport request .
REPORT ZDP_ACC_GRP.
TYPES: BEGIN OF TY_TAB,
        KTOPL TYPE KTOPL,
        KTOKS TYPE KTOKS,
        TXT30 TYPE TXT30,
        VONNR TYPE VONNR,
        BISNR TYPE BISNR,
       TRKORR TYPE TRKORR,
   END OF TY_TAB.
data: lt_tab type table of ty_tab,
       wa_tab type ty_tab.
data: begin of record,
* data element: KTOPL
         KTOPL_01_001(004),
* data element: KTOKS
         KTOKS_01_002(004),
* data element: TXT30_077T
         TXT30_01_003(030),
* data element: VONNR_077S
         VONNR_01_004(010),
* data element: BISNR_077S
         BISNR_01_005(010),
* data element: TRKORR
         TRKORR_006(020),
       end of record.
*       Batchinputdata of single transaction
DATA:   BDCDATA type table of BDCDATA WITH HEADER LINE.
*       messages of call transaction
DATA:   MESSTAB type table of BDCMSGCOLL WITH HEADER LINE.
*       error session opened (' ' or 'X')
DATA:   E_GROUP_OPENED.
*       message texts
TABLES: T100.
data:lv_file type string.
parameters: p_fname type IBIPPARMS-PATH.
at selection-screen on value-request for p_fname.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
    PROGRAM_NAME        = SYST-CPROG
    DYNPRO_NUMBER       = SYST-DYNNR
    FIELD_NAME          = 'P_FNAME'
IMPORTING
    FILE_NAME           = p_fname .
start-of-selection.
lv_file = p_fname.
CALL FUNCTION 'GUI_UPLOAD'
   EXPORTING
     FILENAME                      = LV_FILE
*   FILETYPE                      = 'ASC'
    HAS_FIELD_SEPARATOR           = 'X'
   TABLES
     DATA_TAB                      = LT_TAB
EXCEPTIONS
    FILE_OPEN_ERROR               = 1
    FILE_READ_ERROR               = 2
    NO_BATCH                      = 3
    GUI_REFUSE_FILETRANSFER       = 4
    INVALID_TYPE                  = 5
    NO_AUTHORITY                  = 6
    UNKNOWN_ERROR                 = 7
    BAD_DATA_FORMAT               = 8
    HEADER_NOT_ALLOWED            = 9
    SEPARATOR_NOT_ALLOWED         = 10
    HEADER_TOO_LONG               = 11
    UNKNOWN_DP_ERROR              = 12
    ACCESS_DENIED                 = 13
    DP_OUT_OF_MEMORY              = 14
    DISK_FULL                     = 15
    DP_TIMEOUT                    = 16
    OTHERS                        = 17 .
LOop at lt_tab into wa_tab.
perform bdc_dynpro      using 'SAPL0F09' '0020'.
perform bdc_field       using 'BDC_CURSOR'
                               'V_T077S-TXT30(01)'.
perform bdc_field       using 'BDC_OKCODE'
                               '=NEWL'.
perform bdc_dynpro      using 'SAPL0F09' '0020'.
perform bdc_field       using 'BDC_CURSOR'
                               'V_T077S-BISNR(01)'.
perform bdc_field       using 'BDC_OKCODE'
                               '=SAVE'.
perform bdc_field       using 'V_T077S-KTOPL(01)'
                               WA_TAB-KTOPL."record-KTOPL_01_001.
perform bdc_field       using 'V_T077S-KTOKS(01)'
                               WA_TAB-KTOKS."record-KTOKS_01_002.
perform bdc_field       using 'V_T077S-TXT30(01)'
                               WA_TAB-TXT30."record-TXT30_01_003.
perform bdc_field       using 'V_T077S-VONNR(01)'
                               WA_TAB-VONNR."record-VONNR_01_004.
perform bdc_field       using 'V_T077S-BISNR(01)'
                               WA_TAB-BISNR."record-BISNR_01_005.
perform bdc_dynpro      using 'SAPLSTRD' '0300'.
perform bdc_field       using 'BDC_CURSOR'
                               'KO008-TRKORR'.
perform bdc_field       using 'BDC_OKCODE'
                               '=LOCK'.
perform bdc_field       using 'KO008-TRKORR'
                               WA_TAB-TRKORR."record-TRKORR_006.
perform bdc_dynpro      using 'SAPL0F09' '0020'.
perform bdc_field       using 'BDC_CURSOR'
                               'V_T077S-KTOPL(02)'.
perform bdc_field       using 'BDC_OKCODE'
                               '=BACK'.
perform bdc_dynpro      using 'SAPL0F09' '0020'.
perform bdc_field       using 'BDC_CURSOR'
                               'V_T077S-KTOPL(02)'.
perform bdc_field       using 'BDC_OKCODE'
                               '=BACK'.
perform bdc_transaction using 'OBD4'.
ENDLOOP.
FORM BDC_TRANSACTION USING TCODE.
   DATA: L_MSTRING(480).
   DATA: L_SUBRC LIKE SY-SUBRC.
* batch input session
* call transaction using
     REFRESH MESSTAB.
     CALL TRANSACTION 'OBD4' USING BDCDATA
                      MODE 'A'" CTUMODE
                      UPDATE 'S'"CUPDATE
                      MESSAGES INTO MESSTAB.
     L_SUBRC = SY-SUBRC.
       LOOP AT MESSTAB.
         SELECT SINGLE * FROM T100 WHERE SPRSL = MESSTAB-MSGSPRA
                                   AND   ARBGB = MESSTAB-MSGID
                                   AND   MSGNR = MESSTAB-MSGNR.
         IF SY-SUBRC = 0.
           L_MSTRING = T100-TEXT.
           IF L_MSTRING CS '&1'.
             REPLACE '&1' WITH MESSTAB-MSGV1 INTO L_MSTRING.
             REPLACE '&2' WITH MESSTAB-MSGV2 INTO L_MSTRING.
             REPLACE '&3' WITH MESSTAB-MSGV3 INTO L_MSTRING.
             REPLACE '&4' WITH MESSTAB-MSGV4 INTO L_MSTRING.
           ELSE.
             REPLACE '&' WITH MESSTAB-MSGV1 INTO L_MSTRING.
             REPLACE '&' WITH MESSTAB-MSGV2 INTO L_MSTRING.
             REPLACE '&' WITH MESSTAB-MSGV3 INTO L_MSTRING.
             REPLACE '&' WITH MESSTAB-MSGV4 INTO L_MSTRING.
           ENDIF.
           CONDENSE L_MSTRING.
           WRITE: / MESSTAB-MSGTYP, L_MSTRING(250).
         ELSE.
           WRITE: / MESSTAB.
         ENDIF.
       ENDLOOP.
   REFRESH BDCDATA.
ENDFORM.
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
   CLEAR BDCDATA.
   BDCDATA-PROGRAM = PROGRAM.
   BDCDATA-DYNPRO   = DYNPRO.
   BDCDATA-DYNBEGIN = 'X'.
   APPEND BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
     CLEAR BDCDATA.
     BDCDATA-FNAM = FNAM.
     BDCDATA-FVAL = FVAL.
     APPEND BDCDATA.
ENDFORM.
But the FI consultant wants to add multiple records to 'G/L account group'.After adding records before saving the system need to ask transport request at the last.
How can I write code ...??
Please help me.

Hi Srikanth,
Thanks for reply,
You are right we need to load hierarchy for G/L then we can see all the G/L's for all G/L groups.
I have one more question when I check in RSA3 for the G/L account numbers, I could not find them.
I am using the datasource fi_gl_4 and in rsa3 I can see 1000 records data and when I put filter on G/L account and search for the G/L number I needed I cant see it, but it is there in the functional transaction(f.01)?
How to check for the required G/L's in rsa3 ?
Thx

How to store multiple records for one master reocrd using sequnce

dear,
my question is in one form i have master block f and detail block.
my question is i created one sequence and assign to master table. but i dont know how to assign that sequence to multiple record in detail table for that particular master record. i got lots of answer previously but i m not getting exactly.pls tell me full procedure otherwise gv me one demo application
NOTe: the sequnce is created after master record commiting to database.
PLS pls help me
Thanks
damby

i did not get answer pls help me.

How to concatenate multiple records into one

Hi everybody:
I want to know if exist some way to concat multiple records into one without using cursors. For example, I have a table named "Authors" like this:
Lan|Author
English|Ernest Hemingway
Spanish|Octavio Paz
Spanish|Mario Vargas Llosa
English|Sinclair Lewis
Spanish|Gabriel García Márquez
And I want to get this:
Author
Octavio Paz, Mario Vargas Llosa, Gabriel García Márquez
I have worked with SQL Server and I can do something like this:
CREATE FUNCTION dbo.MyConcat (@lan varchar(10))
RETURNS varchar(5000) AS
BEGIN
declare @retvalue varchar(5000)
set @retvalue=''
select @retvalue = @retvalue + Author +',' from Authors where lan = @lan
return substring(@retvalue,1,len(@retvalue)-1)
END
ie, do not use cursors to concatenate records. However, with ORACLE, I have to do someting like this.
FUNCTION MyConcat(P_Lan IN VARCHAR2) RETURN VARCHAR2 IS
v_ret VARCHAR2(4000);
v_element VARCHAR2(4000);
v_cursor sys_refcursor;
BEGIN
OPEN v_cursor FOR SELECT Author FROM Authors where Lan = P_Lan
LOOP
FETCH v_cursor INTO v_elemento;
EXIT WHEN v_cursor%NOTFOUND;
IF v_ret IS NULL THEN
v_ret := v_element;
ELSE
v_ret := v_ret || ', ' || v_element;
END IF;
END LOOP;
RETURN v_ret;
END;
Exist some other way to do this?
Best Regards
Jack

Tks both for answer... I forgot to mention that I am using Oracle 10g. I read about LISTAGG() but this function is available for Oracle 11g release 2.
I wil read about the other techniques than Hoek mention
Best Regards.
Jack

How to handle multiple records in BPMN process

Hi All,
We are using Oracle BPM 11g.In my requirement,I am using the database adapter to get the data from table and I need to validate the each record and update the status of that record from the BPM Process.But I dont know how to handle if multiple records come at a time.Can anybody please helpout from this problem.
Thanks in advanced.
Narasimha Rao.

Can you have a look at this post: http://redstack.wordpress.com/2010/09/30/iteratingtraversing-arrays-in-bpm/
It's solving a different problem, but the key is that it's using a multi-instance subprocess to iterate over an array of "things" that need to be acted in. In your case it's the set of results from the db query rather than the set of tests in the example. But the principle is the same. You'd take collection of rows from the DB and process them in a multi-instance subprocess. The text that begins with the following would be good place to start:
"Now let’s implement the body of our process. We will use the Subprocess object to handle the traversal of the array of tests. Drag a Subprocess from the component palette on the right into the process and drop it on the line between the Start and End nodes."
In the loop characteristics you'd define whether you want to execute serially or in parallel.

How to select multiple records in the ALV POP UP by using oops

Hi All,
We have a requirement of ALV POP UP by using the OOPS. How to select the multiple records in the POP UP and After selecting that i want do Inteactive ALV means again one more POP UP in ALV.
Thanks for help....
Regards,
Bharani

Hello Bharani
Displaying an ALV list in a popup is by no means different from a list displayed on a main screen. The only thing you need to consider is that you set the right screen level when creating the parent container for the ALV.
For more details refer to thread in CL_GUI_SPLITTER_CONTAINER ALV list is not show in called screen
" step 1:
CREATE OBJECT gr_spliter
    EXPORTING
      parent = cl_gui_container=>screen0 " For first popup use: =>screen1
      rows = 1
      columns = 2.
Regards
Uwe

How to get Multiple records from functions

Hi Everyone
Im new to this stuff. Im trying through JCO. As far as the single recordsets like data of customer or article are concerned i get it through an array.
But i wanted to retrieve
1- Whole tables like (all articles)
2- Selected articles. or Customer order details (articles in PO)
That means multiple records in one go.
Later on ill display it in JTables.
Like for the past three days i was googling around. Thought like this ones not for my stomach. Came across this Forum. Thought its worth posting a request.
Here is the code
public String[] KSearch(String Knr) throws Exception{
                        String[] Result=new String[11];
                        IFunctionTemplate ftemplate= Con.repository.getFunctionTemplate("SucheKUNDE");
                        if (ftemplate == null)
                                throw new Exception("Funktionstemplate nicht gefunden");
                        JCO.Function function = ftemplate.getFunction();
                        JCO.ParameterList input = function.getImportParameterList();
                        input.setValue(Knr,"FieldName");
                   JCO.Client client = JCO.getClient(Con.conPoolId);
                   client.execute(function);
                   JCO.ParameterList output = function.getExportParameterList();
                   Result[0]=output.getString("NAME");
                   Result[1]=output.getString("VORNAME");
                   Result[2]=output.getString("GDATE");
                   Result[3]=output.getString("TELEFON");
                   Result[4]=output.getString("MAIL");
                   Result[5]=output.getString("STRASSE");
                   Result[6]=output.getString("PLZ");
                   Result[7]=output.getString("ORT");
                   Result[8]=output.getString("KONTO");
                   Result[9]=output.getString("INSTITUT");
                   Result[10]=output.getString("BLZ");
                                                                                JCO.releaseClient(client);
                   return Result;
now instead of a single record what if im expecting a number of records, like what if i need customer over 25. Which means more than one. I have to get in tabular format so that i can display it in JTables.
Hope it a bit illustrative.
Regards
Edited by: Aaron Maleck on Jan 5, 2008 7:35 AM

public String[] KSearch(String Knr) throws Exception{
String[] Result=new String11;
IFunctionTemplate ftemplate= Con.repository.getFunctionTemplate("SucheKUNDE");
if (ftemplate == null)
throw new Exception("Funktionstemplate nicht gefunden");
JCO.Function function = ftemplate.getFunction();
JCO.ParameterList input = function.getImportParameterList();
input.setValue(Knr,"FieldName");
JCO.Client client = JCO.getClient(Con.conPoolId);
client.execute(function);
// Maybe here you should use a JCO.Table Class to get the //ExportParameters such as
JCO.Table output = function.getTableParameterList().getTable( "tabelname" );
// so you can use setRow() Function to get the information of the //relevant record. such as the 3. Costum
output.setRow(3);// Record Number
Result[0]=output.getString("NAME");
Result[1]=output.getString("VORNAME");
Result[2]=output.getString("GDATE");
Result[3]=output.getString("TELEFON");
Result[4]=output.getString("MAIL");
Result[5]=output.getString("STRASSE");
Result[6]=output.getString("PLZ");
Result[7]=output.getString("ORT");
Result[8]=output.getString("KONTO");
Result[9]=output.getString("INSTITUT");
Result10=output.getString("BLZ");
JCO.releaseClient(client);
return Result;
Ｉam not sure that works. But you can try it. and reply me to tell if it really works as i think.
Hope helps.
Amao

How to get multiple records using fn-bea:execute-sql()

Hi,
I created Proxy service(ALSB3.0) to get records from DB table. I have used Xquery function(fn-bea:execute-sql()). Using simple SQL query I got single record, but my table having multiple records. Please suggest how to get multiple records using fn-bea:execute-sql() and how to assign them in ALSB variable.
Regards,
Nagaraju
Edited by: user10373980 on Sep 29, 2008 6:11 AM

Hi,
Am facing the same issue stated above that I couldnt get all the records in the table that am querying in the Proxyservice.
For example:
fn-bea:execute-sql('EsbDataSource', 'student', 'select Name from StudentList' ) is the query that am using to fetch the records from the table called StudentList which contains more than one records like
Id Name
01 XXX
02 YYY
03 ZZZ
I tried to assign the result of the above query in a variable and while trying to log the variable, I can see the below
<student>
<Name>XXX</Name>
</student>
I want to have all the records from my table in xml format but it's not coming up. I get the value only from the first row of my table.
Please suggest.
regards,
Venkat

Line separator to get multiple records in one variable

Hi Experts,
I have a requirement where i need to get data in the below form , in exactly one variable.
Invoice No.       Inv. Date      Voucher   Gross Amount    TDS Amount     Discount    Paid Amount
986013092,17   04/08/2010    00091217   32415.00            .00                 .00          32415.00
Bharti Infot      27/07/2010     00091230   19600.00            .00                 .00          19600.00
9860442689    04/08/2010       001247     47374.00            .00                  .00         47374.00
2031565000,2031565000Total Amount     99389.00             .00                  .00         99389.00
As of now, I have written the following,
loop at lt_merge into ls_merge.
lv_skfbt = ls_MERGE-SKFBT.
lv_budat = Ls_MERGE-budat.
lv_wskto = Ls_MERGE-wskto.
lv_wrbtr = Ls_MERGE-wrbtr.
lv_WT_QBSHB = ls_merge-WT_QBSHB.
concatenate invoice_id
            ls_merge-BELNR
            lv_BUDAT
            ls_merge-XBLNR
            lv_skfbt
            lv_wt_qbshb
            lv_WSKTO
            lv_wrbtr
into invoice_id separated by space.
endloop.
which gives me one row of the table where, invoice_id stores my entire one record as a string. My question is how do I proceed with separating the lines if I have multiple records?
Thanks in advance..
Regards,
Trishna

HI
choose some character that will be not use in your data for example '|' vertical separator. You will get string:
invoice_id = line1 | line2 | line3 |.....
loop at lt_merge into ls_merge.
lv_skfbt = ls_MERGE-SKFBT.
lv_budat = Ls_MERGE-budat.
lv_wskto = Ls_MERGE-wskto.
lv_wrbtr = Ls_MERGE-wrbtr.
lv_WT_QBSHB = ls_merge-WT_QBSHB.
concatenate invoice_id
ls_merge-BELNR
lv_BUDAT
ls_merge-XBLNR
lv_skfbt
lv_wt_qbshb
lv_WSKTO
lv_wrbtr
into invoice_id separated by space.
new code
concatenate invoice_id '|' into invoice_id
endloop.

JMS picking multiple records

Similar Messages

Maybe you are looking for