JMSSecurityException: MQJMS2013: invalid security authentication supplied f

I had a very strange JMS exception. I was testing MQ and WL integration. The following simple java code segment worked fine if running by itself, but failed if it was running inside a WL JSP page. MQ and WL servers were on the same Solaris box, the user account was valid for MQ.
          Is there any security policy that prohibits WL to pass my user id and password in the createQueueConnection method?
          QueueConnectionFactory connectionFactory = new com.ibm.mq.jms.MQQueueConnectionFactory();
          QueueConnection connection = connectionFactory.createQueueConnection("userid", "password");
          connection.close();
          javax.jms.JMSSecurityException: MQJMS2013: invalid security authentication supplied for MQQueueManager
               at com.ibm.mq.jms.MQQueueConnectionFactory.createQueueConnection(MQQueueConnectionFactory.java:231)
               at jsp_servlet.__jmstest._jspService(__jmstest.java:128)
               at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
               at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:996)
               at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
               at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
               at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6452)
               at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
               at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
               at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3661)
               at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2630)
               at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
               at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)

That's an MQ JMS exception, so the MQ JMS documentation would be the best place to find out what it means.
If I recall correctly, when you're using the MQ JMS API in "bindings" mode -- which is what you're probably doing if your queue manager is on the same machine as WLS -- then MQ does not allow you to supply a username and password. It uses your Unix user ID to authenticate itself to the queue manager in this case.

Similar Messages

MQJMS2013: invalid security authentication supplied for MQQueueManager

Hi guys!
I am having trouble in getting connected to the Queue Manager.I am getting these errors
com.ibm.mq.MQException: MQJE001: An MQException occurred: Completion Code 2, Rea
son 2035
MQJE036: Queue manager rejected connection attempt
at com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
242)
at com.ibm.mq.MQClientManagedConnectionFactoryJ11._createManagedConnecti
on(MQClientManagedConnectionFactoryJ11.java:276)
at com.ibm.mq.MQClientManagedConnectionFactoryJ11.createManagedConnectio
n(MQClientManagedConnectionFactoryJ11.java:296)
at com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
a:80)
at com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
ctionManager.java:171)
at com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
a:754)
at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:688)
at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:469)
at com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:2255)
at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:1749)
at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:144)
at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:54)
at com.ibm.mq.jms.MQQueueConnectionFactory.createQueueConnection(MQQueue
ConnectionFactory.java:106)
at MqConnTest.<init>(MqConnTest.java:69)
at MqConnTest.main(MqConnTest.java:106)
Caused by: com.ibm.mqservices.MQInternalException: MQJE001: An MQException occur
red: Completion Code 2, Reason 2035
MQJE036: Queue manager rejected connection attempt
at com.ibm.mq.MQInternalCommunications.connectToQueueManager(MQInternalC
ommunications.java:2894)
at com.ibm.mq.MQInternalCommunications.<init>(MQInternalCommunications.j
ava:619)
at com.ibm.mq.MQSESSIONClient.MQCONN(MQSESSIONClient.java:1344)
at com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
218)
... 15 more
MQJMS2013: invalid security authentication supplied for MQQueueManager
can you advice me what is missing and what should be done.
thanks in advance
-Chandra

Hi
I am also facing the same problem .you have any solution for it
Thanks
Sahadeva Reddy

Interconnect MQSeries adapter exception MQJMS2013: invalid security authentication

Hi,
I get the MQJMS2013: invalid security authentication supplied for
MQQueueManager in my MQ Series adapter for Oracle interconnect. Is there more
specific information about this error. Maybe in an IBM user manual.
Has anybody experience with the IBM MQ Series adapter for Oracle interconnect 9.0.2
Thanx

That's an MQ JMS exception, so the MQ JMS documentation would be the best place to find out what it means.
If I recall correctly, when you're using the MQ JMS API in "bindings" mode -- which is what you're probably doing if your queue manager is on the same machine as WLS -- then MQ does not allow you to supply a username and password. It uses your Unix user ID to authenticate itself to the queue manager in this case.

JMSSecurityException: MQJMS2013

I am using MQ 5.1 and JMS on solaris and jdk is 1.1.2.Getting following error.
04 29 10:10:15 sqa47 EEC_8004_E: JMS RELATED EXCEPTION - CURRENT ERROR IS EXCEPT
ION:DTE[Tue Apr 29 10:10:15 MST 2003]CAT[EECEventLoadingException], ORIGIN[Event
Loader : startLoading Method ], TYP[FATAL],CDE[8004], TXT[ JMS RELATED EXCEPTION
javax.jms.JMSSecurityException: MQJMS2013: invalid security authentication supp
lied for MQQueueManager].
Please help.
mail me on [email protected]

use setmqauth to user of application for accessing qmgr/q's

HT204266 How come my credit card says invalid security code when I put my code in at the App Store?

How come my credit card says invalid security code when I put my code in at the App Store? I have a bunch of free apps when I had my ipad 1 now I have 2 and my credit card will not be read as authentic Watson ever I tried my girls card nothing do I need to have money on it for a free download? I even bought a couple of games but why with so many free ones? Please help me I'm slow so walkit through with me thnx also my ipad 2 is brand new out da box and I accidentally updated to 6.0 without finding out first about it so some pointers to it would help ...which I think that it has something to do with it.

Is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorisations have the correct information on file.
And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
For iOS I would expect an updated version of the manual to appear here at some point : http://support.apple.com/manuals/ipad/
In the meantime there is this : http://www.apple.com/ios/whats-new/

Invalid Security role-name error in Web Project

Hi All,
I have imported a J2EE application project built in JBOSS into NWDS 7.1.
While building the project i get the following error
CHKJ3020E:Invalid Security role-name error: PEHNTAHO_ADMIN
This error directs me to the following code in web.xml
<security-constraint>
 <display-name>Default JSP Security Constraints</display-name>
 <web-resource-collection>
 <web-resource-name>Portlet Directory</web-resource-name>
 <url-pattern>/jsp/*</url-pattern>
 <http-method>GET</http-method>
 <http-method>POST</http-method>
 </web-resource-collection>
 <auth-constraint>
 <role-name>PEHNTAHO_ADMIN</role-name>
 </auth-constraint>
 <user-data-constraint>
 <transport-guarantee>NONE</transport-guarantee>
 </user-data-constraint>
 </security-constraint>
I have tried out the following things to resolve this issue :
1) Remove the role manually(as suggested by various people in other J2EE forums), but then some other error came in to picture
2)Then I added the following code in web.xml
<security-role>
 <role-name>PEHNTAHO_ADMIN</role-name>
 </security-role>
Then the above mentioned build error gets resolved, but then I get the following error while deploying the application.
Dec 3, 2007 12:59:21 AM /userOut/daView_category (eclipse.UserOutLocation) [Thread[Deploy Thread,5,main]] ERROR: Deploy Exception.An error occurred while deploying the deployment item 'sap.com_AnalyticsApp2EAR'.; nested exception is:
 java.rmi.RemoteException: class com.sap.engine.services.dc.gd.DeliveryException: An error occurred during deployment of sdu id: sap.com_AnalyticsApp2EAR
sdu file path: D:\usr\sap\CE1\J01\j2ee\cluster\server0\temp\tcbldeploy_controller\archives\191\AnalyticsApp2EAR.ear
version status: HIGHER
deployment status: Admitted
description:
 1. Error:
Cannot update application sap.com/AnalyticsApp2EAR. Reason: The application sap.com/AnalyticsApp2EAR will not be update, because its validation failed. Reason:
ERRORS:
Web Model Builder: com.sap.engine.frame.core.configuration.NameNotFoundException: The parameter/s in String "<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
 
</web-app>
" is/are not defined and could not be substituted., file: AnalyticsApp2.war#WEB-INF/web.xml, column 0, line 0, severity: error
WARNINGS:
Web Model Builder: Following tests could not be executed because of failed precondition test "Web Model Builder" : Implicit Constraints Test, JSF Application Test, Mapping Test, Web File Existence Test, Web Class Existence Test, Security Role Test, file: AnalyticsApp2.war, column -1, line -1, severity: warning
3) I had also added the following code in web-j2ee-engine.xml
<security-role-map>
 <role-name>PEHNTAHO_ADMIN</role-name>
 <server-role-name>all</server-role-name>
 </security-role-map>
but still i get the same deployment error.
Please help me in resolving this problem.
Can anybody tell me the use of role "PEHNTAHO_ADMIN"?
Thanks and Regards,
Sruti

Hi Malathy,
Once the users are created in Authentication Provider, and once the roles are created in Weblogic Server, You just have to map users to roles in Jazn-data.xml.
Could you please let us know you created a roles named users in WLS ?
Thanks & Regards,
Murali.
============

WSUS Sync is not working Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. --- System.Security.Authentication.AuthenticationException: The remote

I know there are loads of posts with same issue and most of them were related to proxy and connectivity .
This was case for me as well (few months back). Now the same error is back. But I've confirmed that FW ports and proxy are fine this time around.
server is configured on http port 80
ERROR
Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid
according to the validation procedure.~~at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request). Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WSyncAction.WSyncAction.SyncWSUS
I've checked proxy server connectivity. I'm able browse following site from WSUS server
http://catalog.update.microsoft.com/v7/site/Home.aspx?sku=wsus&version=3.2.7600.226&protocol=1.8
I did telnet proxy server on the particular port (8080) and that is also fine.
I've doubt on certificates, any idea which are the certificates which we need to look? And if certificate is expired then (my guess) we won't be able open the above mentioned windows update catalog site?
Any tips appreciated !
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

Hi Lawrence ! - Many thanks for looking into this thread and replying. Appreciate your help.
Your reply ("SSL is enabled/configured, and the certificate being used is invalid
(or the cert does not exist or cannot be obtained), or the SSL connection could not be established.") is very helpful.
I've already tested CONTENT DOWNLOAD and it's working fine. WSUS Sync was also working fine for years with proxy server configured on port (8080) and WSUS server on port 80.
My Guess (this is my best guess ;)) is this something to do with Firewall or Proxy side configuration rather than WSUS. However, I'm not finding a way to prove this to proxy/firewall team. From their perspective all the required port communication open and
proxy server is also reachable. More over we're able to access internet (Microsoft Update Catalog site) over same port (8080).
Any other hints where I can prove them it's a sure shot problem from their side.
Thanks again !!
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

JAX-WS web service client and Windows integrated Security authentication

I am currently developing a JAX-WS web service client running on WebLogic 10.3.2.0. The client is connecting to exchange web service running on IIS.
Everything works well when EWS is configured with Http basic authentication.
The problems started when I changed the autentication method on EWS from Http basic authentication to Windows integrated Security authentication.
The client is then unable to authenticate to the web service. Every request made to EWS returns with the message : Invalid HTTP server response [401] - Unauthorized.
I tried using an authenticator like this one:
static class RetrieveWSDLAuthenticator extends Authenticator
private String username, password;
public RetrieveWSDLAuthenticator(String user, String pass)
username = user;
password = pass;
@Override
protected PasswordAuthentication getPasswordAuthentication()
return new PasswordAuthentication(username, password.toCharArray());
and setting it as the default authenticator :
Authenticator.setDefault(new MyAuthenticator("username", "password"));
but the method getPasswordAuthentication() was not even called.
Is there a way to make a JAX-WS client works with Windows integrated Security ?

WIS is not suppported on WLS JAX-WS. You'll need to use other authentication mechanisms such as http basic (which you tried already), or message-level security such as UNT, or SAML.
Regards,
Pyounguk

I can't update my payment Inof.. Whenever I Put in the new card info it say invalid security code and I haven't been able to download any new apps for two months now

I can't download any apps on my phone... I've played in and you credit card information and it keeps saying invalid security code

No this was absolutely of no help what so ever!!!!1I have had this issue before and it was also a nightmare. I don't understand why you have to go thru so much pain until you can talk to a real person. I don't have 48 hours. I use this app to make money. I can't update it, so I can't use it, all because I can't update my info, which is clearly on the Apple side. Not my bank (like they first want to say), not me, I know who I am, but it must be something on apple's side. And to wait 48 hours for an email response to tragic . I can't believe a company with as much assets as Apple can't get a real person to help me sort this out. I had this same problem years ago, and it was the same mess. Whay do I keep doing this? Am I just one of the bovine masses who just have to have an iPhone? Yikes

Invalid security code?

I have bought about 12 games off the app store, but now it asks me to sign in my billing info, the only thing that was giving me problems was the security code, it constantly tells me "Invalid security code" and it's the right one, I know where it is on my visa, I've tried to see if my purchase history is screwed up somehow, but doesn't let the purchase history load, or tell me what's wrong. This is a really irritating problem, and I hope to see if anyone knows about what I'm talking about.

I'm the same issue as well!! Just got my iPod on Friday, so I'm new to all this--but I can tell you the card I used initially was working just fine then. Wasn't until just yesterday that suddenly I had an "unpaid balance" and when I tried to reenter my card number, that was when I got the invalid sec. code error. Even tried a couple of other cards, and still the same error.

Invalid security code for iphone 4

I'm not sure if I am posting in the correct area of this page but oh well. I recently received a iphone 4 from my husband. And after having the phone for one week, I could not download any apps to my phone because of billing info or invalid security code. Here's what worked for me. If you do not have any money on the card, it will continue to display invalid security code. Hope this helps. Good luck!!!

I'm having the same issue. But why the **** is it all of a sudden requiring a legitimate credit card just to download FREE apps? Or even UPDATE free apps??

Invalid Security Code for my valid debit card?

Really!!!! I guess poor people like me who spend so much money on the **** device first of all (iPhone) and the **** phone bill, have a limit to purchasing "FREE" apps from the app store because apparently, now my apple ID won't accept my debit card information! INVALID SECURITY CODE!!! -____-
Tried to to work around this stupid obstacle. 1000 times maybe. Tried using my Husband's debit card, my siblings credit card...NOTHING. Still, my apple ID didn't want to accept the info. WHAT TO DO, WHAT TO DO. Not like my whole life revolves around buying apps from the app store via Iphone, its just...THATS WHAT I BOUGHT THE **** PHONE FOR, the benefits...the whole shabang!
So I discoverved that I could make a new apple ID. How convenient it was for me to make a new email address - a valid one, and make a new apple ID. I scored! GENIUS. The option isnt there though. You need to sign out of your current apple ID and then the option tabs pop up. SMART MOVE. smart *** move.

Sasha,
You'll need to contact your bank and make sure that your name and billing address match EXACTLY with the name and billing address on your iTunes account, and if they don't then you'll need to update that information on your iTunes account. If they don't match then you're eventually going to have the same problem with your new Apple ID.

When I tried updating my apps it says invalid security code for my credit card.

Basically when I try updating an app it says to login. Ok say once I log in it makes me update billing info. When I put my cc info in (which has a 0$ balance) it says invalid security code. This is complete ********, I can't even download FREE apps OR update the ones I have. Im considering going back to android. This is ridiculous.

you cannot place a card on the account that has no balance to it...
you can hit the "None" option if you owe nothing to the itunes store
iTunes Store: My credit card's security code or zip code does not ...

My ipod wont let me buy any apps because it says i have an invalid security code for my moms credit card but its the right one. and it also says i owe money for upgrading an app does anyone know how to remove my moms credit card cause i cant figure itout

my ipod wont let me buy any appps because it says i have an invalid security code for my moms credit card but its the right one. and it also says i owe money for upgrading an app does anyone know how to remove my moms credit card cause i cant figure itout

To change asccount information see:
Changing Account Information
For the code issue this may help.
iTunes Store: My credit card's security code or zip code does not match my bank's records
For a standard iTunes account you need a valid payment method even for free apps and app updates.
What is making it think that you own money for an app upgrade?

After upgrading to Firefox 10.0.2 there is no way to proceed to a website with an invalid security certificate. How do you proceed to these websites in the new release? The fault page only has a button that says "Try again."

Using Firefox 10.0.2 for Mac.
In trying to proceed to various websites (corporate such as dlnet.delta.com (expired certificate), government such as https://www.homeport.navy.mil/links/owa-navy-links/ ) with "invalid" security certificates, Firefox 10.0.2 does not have a button on the error page to continue on to the website. How can you do this using Firefox 10.0.2? I have not found any settings in Firefox preferences to enable this capability either.
Thx.

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

JMSSecurityException: MQJMS2013: invalid security authentication supplied f

Similar Messages

Maybe you are looking for