Job error nmo setuid is not set

I am not able to submit any job on agent database machine it error out with mesg nmo setuid is not set

Run root. sh from AOH/bin and check

Similar Messages

Error ASPRUNTIME: Object reference not set to an instance of an object.in Visual Studio in method CopyPrecompiledFile.

Hello, I have this issue and Ihave wasted atleast 2 days with this one. I have tried all possible solutions -
1. Turn Off Real time McAffee scanning -- I do not have real time scanning ON
2. Delete Bin folder and start all over by adding references -- Did not work
3. delete .compiles or refresh filesdelete temp files from asp.net temp files folder -- no .Compiled file. Deleted refresh files but no use
4. change temp file for appliation in compilation tag of web config -- No use
My application framework is .NET 4.5 and VSD 2012. I have tried to compile from C:\WINDOWS\Mi
crosoft.NET\Framework folder as well as C:\WINDOWS\Mi
crosoft.NET\Framework64 folder. Both gave same error.
I need urgent assistance plz.
Here is stack trace :
C:\Development\Convergence\Applications\CAP\WixSetup\WixSetupView>"C:\WINDOWS\Mi
crosoft.NET\Framework\v4.0.30319\aspnet_compiler.exe" -u -fixedNames -p "C:\Deve
lopment\Convergence\Applications\CAP\TouchPointTier\Presentations" -v / "C:\Deve
lopment\Convergence\Applications\CAP\PrecompiledWeb\ConvergenceCAP" -errorstack
Microsoft (R) ASP.NET Compilation Tool version 4.0.30319.17929
Utility to precompile an ASP.NET application
Copyright (C) Microsoft Corporation. All rights reserved.
error ASPRUNTIME: Object reference not set to an instance of an object.
[NullReferenceException]: Object reference not set to an instance of an object.
at System.Web.Compilation.BuildManager.CopyPrecompiledFile(VirtualFile vfile,
String destPhysicalPath)
at System.Web.Compilation.BuildManager.CopyStaticFilesRecursive(VirtualDirect
ory sourceVdir, String destPhysicalDir, Boolean topLevel)
at System.Web.Compilation.BuildManager.CopyStaticFilesRecursive(VirtualDirect
ory sourceVdir, String destPhysicalDir, Boolean topLevel)
at System.Web.Compilation.BuildManager.CopyStaticFilesRecursive(VirtualDirect
ory sourceVdir, String destPhysicalDir, Boolean topLevel)
at System.Web.Compilation.BuildManager.CopyStaticFilesRecursive(VirtualDirect
ory sourceVdir, String destPhysicalDir, Boolean topLevel)
at System.Web.Compilation.BuildManager.PrecompileAppInternal(VirtualPath star
tingVirtualDir, IEnumerable`1 excludedVirtualPaths)
at System.Web.Compilation.BuildManager.PrecompileApp(VirtualPath startingVirt
ualDir, IEnumerable`1 excludedVirtualPaths)
at System.Web.Compilation.BuildManager.PrecompileApp(ClientBuildManagerCallba
ck callback, IEnumerable`1 excludedVirtualPaths)
at System.Web.Compilation.BuildManagerHost.PrecompileApp(ClientBuildManagerCa
llback callback, List`1 excludedVirtualPaths)
at System.Web.Compilation.BuildManagerHost.PrecompileApp(ClientBuildManagerCa
llback callback, List`1 excludedVirtualPaths)
at System.Web.Compilation.ClientBuildManager.PrecompileApplication(ClientBuil
dManagerCallback callback, Boolean forceCleanBuild)
at System.Web.Compilation.ClientBuildManager.PrecompileApplication(ClientBuil
dManagerCallback callback)
at System.Web.Compilation.Precompiler.Main(String[] args)
C:\Development\Convergence\Applications\CAP\WixSetup\WixSetupView>pause
Press any key to continue . . .

I know these warning are not related to my issue that is the reason i am not able to understand what is wrong with it. Its a huge application and compiliing takes atleast 6-7 hrs and after that I get error in "copyPrecompiledFiles" method.
I have circular reference issue in application but when I build application in specific sequece, it goes away so after builing application with 0 errors, i execute command to precompile
rmdir C:\Precompiled /s /q
mkdir C:\Precompiled
"C:\WINDOWS\Microsoft.NET\Framework64\v4.0.30319\aspnet_compiler.exe" -u -fixedNames -p "C:\ApplicationPath" -v / "C:\Precompiled" -errorstack
pause

The only working print-related function in BioBench1.2 on my PC is the "Print Report", all the other "Print" functions gave me "Error, the printer is not set up correctly".

I used to print all my BioBench data by first exporting them to Excel and then print from there. Recently I need to print some of the screen shots and some data directly from array analysis, but when I click on the "print" buttons, the "Error, the printer is not set up correctly" message occurs. The only thing I can print from BB without this error is the report printing function. I have a postcript printer and I have set the postscript option to be "true"... Thanks !

This problem is a result of a limitation in Windows 9x regarding the size of an image that you can send to the printer. The problem does not occur on Windows 2000/NT. This problem appeared with the increased color options of LabVIEW 6.0 on which the BB1.2 is based.Although it is not immediately obvious, your video driver and settings play a role in printing.
1. Try adjusting the color palette your driver uses (i.e., 256 color, high olor, true color). The error may occur only in one of these modes. Also, change the resolution (number of pixels) to represent the Screen Area; e.g., change from a 1024 x 768 display to an 800 x 600 pixel display.
2.Certain video drivers also support "acceleration" modes. Using a non-accelerated mode often eliminates the error. For
Windows 95/98, right-click on your My Computer icon and select "Properties" from the pop-up
menu. On the Performance tab, click the Graphics button and change the Hardware Acceleration (e.g., if it is set to "Full", lower the setting a notch or two); for Windows 2000/NT, right-click on your Desktop and select "Properties" from the pop-up menu. On the Settings tab, click the Advanced button and go to
Troubleshooting.
3.In Windows, the standard VGA driver provided by the operating system is very stable. Try using this driver in place of the specific one written for your video hardware. If the error is eliminated, there is likely a problem with your vendor-provided video driver.
4.These errors are most often fixed with the latest
video/printer driver. Be sure to contact your hardware manufacturer and install the latest driver. An easy way to determine if your error is "driver-related" is to move your code to another machine (and hopefully a different set of drivers) and see if th
e error persists. If the problem is printer related, try another printer.
5.Make sure there are at least 100M avalible space in your C: drive. If not, set the virtual memory to the other drive which has larger available space.

Error in TPSETTINGS: transdir not set.

tp SHOWBUFFER ECP
This is tp version 372.04.71 (release 700, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
when i m traing to set the parmeter
set TRANSDIR = /usr/sap/trans
export TRANSDIR
and the parameter DIR_TRANS is already showing in rz11
but still it's not taking...
when i m seing this parameter in transport profile file it's exist there..
please tel me the solution what could be the passible cause..
Anil--

Hi,
(quote)tp SHOWBUFFER ECP(quote)
If you are trying on command level, you should specify parameter file in the TP command.
for example:
tp pf=/usr/sap/trans/bin/TP_DOMAIN_<DOMAIN SID>.PFL SHOWBUFFER ECP
For more help on TP command, refer below URL:
[TP Command Tool|http://help.sap.com/saphelp_45b/helpdata/en/3d/ad5b744ebc11d182bf0000e829fbfe/frameset.htm]
Regards.
Rajesh Narkhede

MSS - Compensation Profile iViews Error Messages (Parameter CREVI not set)

Hello Folks,
We are currently implementing ECM with MSS and SAP Portal. In the Plan Compensation iView when I click on the Employee Name hyperlink it is launching Employee Compensation Profile page having General Data, Compensation Adjustments, Salary Development, Salary Survey Data, Compensation Guidelines, Compensation Eligibility, LT Incentive iViews.
I am getting below listed messages in these iViews, I am not able to trace where the configuration for these is missing i.e. either in the Resource or Service or in any of the SPRO step. Could you please help me in pointing to the location where I am missing in the config part.
General Data iView - "Internal error; Parameter CREVI is not set, Salary Development: An error occurred while the data was read."
Salary Development, Salary Survey Data, LT Incentive iViews - "No data available"
Compensation Guidelines, Compensation Eligibility iViews - "To display data, first select an employee".
Thanks much for your help!
Thanks,
NVR.

Enter in the iview PCD portal content :
iView Compensation Planning - edit iview - in propertes search for the field Compensation Review (CREV) it's optional and fey from SAP Table T71ADM08
Edited by: Javier Ignacio Serrano Zamorano on May 5, 2010 10:20 PM

Compensation Profile Page iViews Error Messages (Parameter CREVI not set)

Hello Folks,
We are currently implementing ECM with MSS and SAP Portal. In the Plan Compensation iView when I click on the Employee Name hyperlink it is launching Employee Compensation Profile page having General Data, Compensation Adjustments, Salary Development, Salary Survey Data, Compensation Guidelines, Compensation Eligibility, LT Incentive iViews.
I am getting below listed messages in these iViews, I am not able to trace where the configuration for these is missing i.e. either in the Resource or Service or in any of the SPRO step. Could you please help me in pointing to the location where I am missing in the config part.
General Data iView - "Internal error; Parameter CREVI is not set, Salary Development: An error occurred while the data was read."
Salary Development, Salary Survey Data, LT Incentive iViews - "No data available"
Compensation Guidelines, Compensation Eligibility iViews - "To display data, first select an employee".
Thanks much for your help!
Thanks,
NVR.

Hi NVR,
Please check http://help.sap.com/erp2005_ehp_04/helpdata/EN/ff/c5d98c226848ebae8e7c2ce106db67/frameset.htm for settings and http://help.sap.com/erp2005_ehp_04/helpdata/EN/97/da81a2167345359f153fafcbc8aadf/frameset.htm and the like for the different section values. We do not use some of the infotypes, so there is no data. I am just down to a salary development error now. Working with SAP on message 191413. I wish you well.
Best Regards,
Mike

Iam Running an Application it is running and working fine in Firefox where as Chrome pushing an error stating "Object reference not set to an instance of an object."

Iam Running an Application it is running and working fine in Firefox where as Chrome pushing an error stating "Object reference not set to an instance of an object."

This forum is for discussing technical documentations on Microsoft's web site.
If you need help with an app, contact its author.
Visual C++ MVP

Unable to start java tools - Error : Environment variable JAVA_HOME not set

hi all,
I am not able to start the java tool - Visual Admin, Configtool, etc in the solaris Bash shell.
I was given authorizations on solaris and i'm able to view the logs and browse in solaris boxes,
But, when i try to start Visual Admin, it says" ERROR environment variable JAVA_HOME not set "
Since,my colleagues are using this tool for years, how come the environment variable is not set only for my user profile ?
Is it like the environment variable has to set seperately for every user profile ?
Do i need to set it initially for my profile eventhough it is working for others ?
i am confused..please help.
Addy

Nicholls, Thanks for your quick reply.
Ofcourse, I use my login ID to use java tools and they use their's obviously.I don't use <SID>adm.
We WRQ reflection for X-Windows and Putty for Command line Solaris Access.
When i try to use VA through the X-Window tool WRQ reflection, I am not able to start the tool.
My doubt here is, Do we need to setup the environment variable for every new user initially for the first time ? ( I am a new user for this environment )
Supposing if i need to setup the environment variable, do i need to set it up for the all the Solaris Boxes i use ?
I am able to browse through the files.when i try to start the VA by giving ./go i am not able to start it up.
Appreciate your time and valuable replies.
Addy

Cannot add hub-managed content type with external list lookup columns to a list -- Error:Id field is not set on the external data field

This is a variation on the issue mentioned in this
post
We are using SP 2010 Content Hub to manage our content types. On the content hub we've created a couple of exteranl lists, and then created some site columns as lookups against these lists. We then added the columns to one of our content types
and set it to publish.
After the publishing job executed, I tried adding the content type (which now appears on the subscriber sites) to one of the document libraries on one of the subscriber sites. When I did that it threw the following error:
Microsoft.SharePoint.WebControls.BusinessDataListConfigurationException: Id field is not set on the external data field
at Microsoft.SharePoint.SPBusinessDataField.CreateIdField(SPAddFieldOptions op)
at Microsoft.SharePoint.SPBusinessDataField.OnAdded(SPAddFieldOptions op)
at Microsoft.SharePoint.SPFieldCollection.AddFieldAsXmlInternal(String schemaXml, Boolean addToDefaultView, SPAddFieldOptions op, Boolean isMigration, Boolean fResetCTCol)
at Microsoft.SharePoint.SPContentType.ProvisionFieldOnList(SPField field, Boolean bRecurAllowed)
at Microsoft.SharePoint.SPContentType.ProvisionFieldsOnList()
at Microsoft.SharePoint.SPContentType.DeriveContentType(SPContentTypeCollection cts, SPContentType& ctNew)
at Microsoft.SharePoint.SPContentTypeCollection.AddContentTypeToList(SPContentType contentType)
at Microsoft.SharePoint.SPContentTypeCollection.AddContentType(SPContentType contentType, Boolean updateResourceFileProperty, Boolean checkName, Boolean setNextChildByte)
at Microsoft.SharePoint.SPContentTypeCollection.Add(SPContentType contentType)
at Microsoft.SharePoint.ApplicationPages.AddContentTypeToListPage.Update(Object o, EventArgs e)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)   b55297ed-717f-466d-8bdc-297b20344d3f
I checked the external content type configuration and it did specify an "id column". Anyone know if what I am attempting to do is possible and if so, what special configurations are required?
Thanks

The issue is not External Content type or external list but the look up column.
It's not possible to publish a look up column via the Content Type Hub.
If you need to do this then an alternate way is to use a Managed Metadata column instead, otherwise you will have to implement this via a feature.
Varun Malhotra
=================
If my post solves your problem could you mark the post as Answered or Vote As Helpful if my post has been helpful for you.

Using a Variable in SSIS - Error - "Command text was not set for the command object.".

Hi All,
I am using a OLE DB Source in my dataflow component and want to select SQL Query from the master table I have created variables v_Archivequery
String packageLevel (to store the query).
<Variable Name="V_Archivequery" DataType="String">
     SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
     FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
     ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
     Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)
    </Variable>
I am assigning this query to the v_Archivequery variable, "SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)"
Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, v_Archivequery .
But when I am generating the package and when running I am getting bewlo errror
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object.".
Can Someone guide me whr am going wrong?
Please let me know where am going wrong?
Thanks in advance.
Thankx & regards, Vipin jha MCP

What happens if you hit Preview button in OLE DB Source Editor? Also you can use the same query by selecting SQL Command option and test.
Could you try set the Delay Validation = True at Package and re-run ?
If set the query in variable expression (not in value), then Set Evaluate As Expression = True.
-Vaibhav Chaudhari

WRT160N - LELA FAILED - ERROR - MSG_100_000_003 & Object ref not set to an instance of an object

First of all I would like to say I'm very disappointed with Cisco/Linksys support. I made 6 phone calls and spent about 3 hours on hold and being connected to someone else over the course of about two weeks. The Tech supportin this particular case was the worst I have ever experienced. Regarding the problem - make sure that you do not have any items in the start up such as Linksys EasyLink Advisor and in particular nmctxth unchecked. Also, check that your Anti-Virus does not have the app blocked. I was instructed to uninstall and reinstall about six different times - which I did. This never solved anything. Then I notice a program named "Pure Networks", this appears to be app associated with LELA. The best I could tell this does not get uninstalled and reinstalled like the rest of the program. So I chased the app down to Documents and Settings\All Users\Application Data\Pure Networks\Setup\PlatformSetupInstaller_0.msi . Executed this program which initiated an install program for the same and selected the REPAIR option from the three options (Repair\Modify\Uninstall). After about two or three minutes the program indicated the Repair had completed and the PC needed to be rebooted. Which I did and now the program (LELA) works with no issues. I think when you uninstall and reinstall the LELA program this never gets executed. So when you manually run the program it actually gets executed. I performed this Repair when the file: PlatformSetupInstaller_0.msi was selected and actually executed. The following error messages were indicated before the issue was resolved:
Error
MSG_100_000_003
Cannot find Platform service, make sure that the service is correctly installed on your machine.
Error
Object ref not set to an instance of an object.
Error
1628
These errors occured when various items were selected in LELA and after reboot on reinstall. And by the way LELA would be blank with no Network Map present. If you go through the log files under the Documents and Settings\All Users\Application Data\Pure Networks and C:\Documents and Settings\All Users\Application Data\Linksys\Lela, then search for the word fail, you will turn up these errors in bits and parts. The registry key: 4CDCB1A1-87EE-49AB-9A9F-E270FC5DB823 led me to the Pure Networks program or I might not have figured it all out.
All of these error messages are related to the log files in either folder indicated above.
I hope this helps everyone - again the support was pitiful and I really expected more.

The Linksys Link Network Advisor (LELA) sometimes works, most of the times does not on our "House-PC"; we have to install the disk again when it gets stuck to make it work. Also, in order to make changes to our network, we can do it easily on its web site, but the LELA will not synchronize it sometimes; so we have to go again and put the disk in to re-install LELA and "synchronize" it; though in reality, it is as if we are installing LELA for the first time, everytime we want to make changes to our network, by the way, a real pain!! After reading the advice above, I also installed Sisco's (the Linksys parent company) Network Magic software and now all my computers in my network work seamessly, and perfectly well. I can even share my printers now!! Thanks for this advice; very helpful indeed.
a happy network administrator

Career and Job Error - Area EMPLOYEE_CAREER_ERP2005 does not exist

Hi Experts,
We are getting following error while click on Career and Job tab on ESS. We checked in Table V_T7XSSSERARB. Entry is maintained.
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
Fatal error: Area EMPLOYEE_CAREER_ERP2005 does not exist
Would appreciate kind guidance on this.
Thanks,
Aashish

Waiting for experts comment. We checked services are defined in iViews,Pages,Roles and WorkSet but couldn't resolve issue. Entry also exist in SAP configuration.
ERROR IS AS FOLLOWS :
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Fatal error: Area EMPLOYEE_CAREER_ERP2005 does not exist
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:112)
     at com.sap.xss.ser.xssmenu.fc.ModelHandler.onInit(ModelHandler.java:235)
     at com.sap.xss.ser.xssmenu.fc.wdp.InternalModelHandler.onInit(InternalModelHandler.java:428)
     at com.sap.xss.ser.xssmenu.fc.FcXssMenu.setPersonnelNumber(FcXssMenu.java:570)
     at com.sap.xss.ser.xssmenu.fc.FcXssMenu.onInit(FcXssMenu.java:292)
     at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenu.onInit(InternalFcXssMenu.java:455)
     at com.sap.xss.ser.xssmenu.fc.FcXssMenuInterface.onInit(FcXssMenuInterface.java:165)
     at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenuInterface.onInit(InternalFcXssMenuInterface.java:389)
     at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenuInterface$External.onInit(InternalFcXssMenuInterface.java:546)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
Would really appreciate kind guidance.
Thanks,
Aashish
Edited by: Aashish Brahmbhatt on Oct 2, 2008 10:08 PM

MSS Error Page Counter is not set.

Hi,
I am using EP 7.01 and ECC 6.0 I am getting error in MSS-->Inbox and selecting the option PCR contract agreement generation ,then getting the error like Page counter is not set. How to resolve this error? Can someone give the solution?
Thanks,
Kundan

Goto--> Main Program.
Then Goto->Attributes.
You can change the unicode checks active flag here

Middleware BDOC Error- Parameter I_IBASE is not set

Hi All,
In our system, when a CRM Sales Order transaction is replicated from CRM to ECC6 and completely processed in ECC 6.0
through Invoice, the CRM Middleware receives a BDoc that is in error with message Parameter I_IBASE is not set and the
result is the Document flow is not replicated to CRM transaction. I could not find any relevant OSS note or solution for this
problem. Could you let me know what is the solution for this problem. Please explain the steps to fix this error.
Thanks in advance.
--R D

Hi,
We have experienced the same error; however we have not found any solution.
Has anyone experienced with this error found a solution?
Brent

Error: 'Unicode Flag is not Set'

Hi,
I am trying to include a ZSRF function module in my program (it contains data types that I want to use) and I get an error saying that unicode flag is not set. How can I set this flag?
Val.

Goto--> Main Program.
Then Goto->Attributes.
You can change the unicode checks active flag here

Job error nmo setuid is not set

Similar Messages

Maybe you are looking for