Job failed with error tempdb is not available
HI All,
Backup job failed with error 'Unable to determine if the owner () of job backup_all_user_db_full has server access (reason: The log for database 'tempdb' is not available. [SQLSTATE HY000] (Error 9001)).'
I checked in errorlog
LogWriter: Operating system error 1784(The supplied user buffer is not valid for the requested operation.) encountered.
Write error during log flush. Shutting down server
2014-09-09 07:46:25.90 spid52 Error: 9001, Severity: 21, State: 1
2014-09-09 07:46:25.90 spid52 The log for database 'tempdb' is not available..
2014-09-09 07:46:25.92 spid51 Error: 9001, Severity: 21, State: 1
Can anyone suggest to why it is happening
From the error message, it looks like the drive on which the tempdb log file is residing is having issues.
Please involve your storage admin to look into the disk subsystem
Similar Messages
-
OIM - Reconciliation jobs fail with Error: OPERATIONS_ERROR
Hi,
after integrating OIM with OAM for Fusion Apps provisioning (11.1.3), LDAP Reconciliation jobs fail with error OPERATIONS_ERROR.
Connection to LDAP looks OK, new users created in OIM are synchronized to LDAP, just Reconciliation jobs fail:
<May 1, 2012 10:00:50 AM CEST> <Error> <oracle.iam.platform.entitymgr.provider.ldap> <IAM-0042016> <An error occurred while getting the change log from LDAP - {0}
javax.naming.NamingException: Error: OPERATIONS_ERROR
Virtualization Session closed [Root exception is oracle.ods.virtualization.service.VirtualizationException: Virtualization Session closed]
at oracle.ods.virtualization.jndi.OVDUtil.mapErrorCode(OVDUtil.java:200)
at oracle.ods.virtualization.jndi.OVDContext.search(OVDContext.java:439)
at oracle.ods.virtualization.jndi.OVDContext.search(OVDContext.java:329)
at javax.naming.directory.InitialDirContext.search(InitialDirContext.java:248)
at oracle.iam.platform.entitymgr.provider.ldap.LDAPUtil.search(LDAPUtil.java:1049)
at oracle.iam.platform.entitymgr.provider.ldap.LDAPDataProvider.getChangelogResults(LDAPDataProvider.java:1531)
at oracle.iam.platform.entitymgr.provider.ldap.LDAPDataProvider.deltaDetect(LDAPDataProvider.java:1488)
at oracle.iam.ldapsync.scheduletasks.user.LDAPUserChangesReconTask.execute(LDAPUserChangesReconTask.java:152)
at oracle.iam.scheduler.vo.TaskSupport.executeJob(TaskSupport.java:145)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.iam.scheduler.impl.quartz.QuartzJob.execute(QuartzJob.java:196)
at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:529)
Caused By: oracle.ods.virtualization.service.VirtualizationException: Virtualization Session closed
at oracle.ods.virtualization.service.DefaultVirtualizationSession.checkActiveAndIncrementOp(DefaultVirtualizationSession.java:425)
at oracle.ods.virtualization.service.DefaultVirtualizationSession.search(DefaultVirtualizationSession.java:183)
at oracle.ods.virtualization.jndi.OVDContext.search(OVDContext.java:429)
at oracle.ods.virtualization.jndi.OVDContext.search(OVDContext.java:329)
at javax.naming.directory.InitialDirContext.search(InitialDirContext.java:248)
at oracle.iam.platform.entitymgr.provider.ldap.LDAPDataProvider.deltaDetect(LDAPDataProvider.java:1488)
at oracle.iam.ldapsync.scheduletasks.user.LDAPUserChangesReconTask.execute(LDAPUserChangesReconTask.java:152)
at oracle.iam.scheduler.vo.TaskSupport.executeJob(TaskSupport.java:146)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.iam.scheduler.impl.quartz.QuartzJob.execute(QuartzJob.java:198)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:529)
===
Reconciliation worked before integrating OIM with OAM.
Any ideas what could be wrong - or how to investigate this issue?
Thanks
DanielOVD changelog adapter was OK, but OVD URL was missing in the IT resource.
Reconciliation works now.
Thanks for pointing me to correct direction.
Daniel -
All crawl jobs are failing with errors, Query server not responding.
Hi All,
I'm facing issue with search service , one of the Query server not responding and all the crawl jobs are throwing errors.
Errors:
"The SharePoint item being crawled returned an error when requesting data from the web service. ( Error from SharePoint site )"
"The object was not found. ( Error from SharePoint site: HttpStatusCode NotFound The request failed with HTTP status 404: Not Found. )"
Please suggest some resolutions.
PavanHi Pavan,
1. First verify as given in this article - https://support.microsoft.com/en-us/kb/2323206?wa=wsignin1.0
2. If not 1 resolves issue then try to disable the anonymous access on the default zone web application(in content source)
3. Also check this article if above two steps does not resolve the issue - http://www.sharepointtechs.com/the-sharepoint-item-being-crawled-returned-an-error-when-requesting-data-from-the-web-service-error-from-sharepoint-site-value-does-not-fall-within-the-expected-range
4. If none of the above works then install this CU update http://support.microsoft.com/kb/2596505 and
then re-run you SP Configuration Wizard and restart your SharePoint Server. But before installing this CU on your SharePoint Server ensure your have the latest backup.
4. If all above does not work then remove
the anonymous access (if enabled) and restore the site collection to a new new site.
Please remember to click 'Mark as Answer' if the reply answers your query or 'Upvote' if it helps you. -
Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:00:01 AM Error: 2014-08-15 10:00:07.20
Code: 0xC0047062 Source: Data Flow Task LEAN [6761]
Description: Teradata.Client.Provider.TdException: [Teradata Database] [3006] Logons are disabled.
at Teradata.Client.Provider.WpMessageManager.CheckForError()
at Teradata.Client.Provider.WpMessageManager.ProcessResponse()
at Teradata.Client.Provider.WpLogonManager.Action()
at Teradata.Client.Provider.WpSession.ManagerAction(WpMessageManager manager, UtlStopwatchWrapper watch, Int32 connectionTimeout)
at Teradata.Client.Provider.WpSession.Open(Int32 connectionTimeout, String password)
at Teradata.Client.Provider.WpSession.Open(Int32 connectionTimeout)
at Teradata.Client.Provider.Connection.Open(UtlConnectionString connectionString, UInt32 timeout)
at Teradata.Client.Provider.ConnectionPool.CreateConnection(UInt32 timeout)
at Teradata.Client.Provider.ConnectionPool.GetConnectionFromPool(Object owningObject)
at Teradata.Client.Provider.ConnectionFactory.GetConnection(Object owningObject, UtlConnectionString connStr)
at Teradata.Client.Provider.TdConnection.Open()
at Microsoft.SqlServer.Dts.Runtime.ManagedHelper.GetManagedConnection(String assemblyQualifiedName, String connStr, Object transaction)
at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager100.AcquireConnection(Object pTransaction)
at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.AcquireConnections(Object transaction)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper100 wrapper, Object transaction)
End Error Error: 2014-08-15 10:00:07.35 Code: 0xC0047017 Source: Data Flow Task SSIS.Pipeline
Description: component "LEAN" (6761) failed validation and returned error code 0x80004005. End Error Error: 2014-08-15 10:00:07.48
Code: 0xC004700C Source: Data Flow Task SSIS.Pipeline Description: One or more component failed validation.
End Error Error: 2014-08-15 10:00:07.60 Code: 0xC0024107 Source: Data Flow Task
Description: There were errors during task validation. End Error
DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:00:01 AM Finished: 10:00:07 AM
Elapsed: 6.692 seconds. The package execution failed. The step failed.
SQL Server agent job fails with above error, Please let me know process tohandle it.
Thanks,
Vishal.The error message suggests its the issue with Teradata source database to which SSIS tries to connect within the data flow task. Make sure Teradata database is available and LOGON is enabled.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Hello,
When I tried to update the schedule of the project , the job failed with the error message " AssignmentAlreadyExists". I further looked into the ULS logs but it wasn't that helpful.
This is the message I found in ULS logs "type = UpdateScheduledProject failed at Message 5 and is blocking the correlation Errors: AssignmentAlreadyExists,Leaving Monitored Scope (FillTypedDataSet -- MSP_WEB_SP_QRY_ReadTimeSheetAssignmentsAndCustomFieldData).
Execution Time=398.730006187937"
Pplease help me to understand the root cause of this problem.
I have verified all the assignments in the plan and I did not find any duplicates.
Thanks in advance.
SeshaThis issue might need detailed troubleshooting, I would suggest you raise a support case with Microsoft.
Cheers! Happy troubleshooting !!! Dinesh S. Rai - MSFT Enterprise Project Management Please click Mark As Answer; if a post solves your problem or Vote As Helpful if a post has been useful to you. This can be beneficial to other community members reading
the thread. -
DPM 2012 R2 All backups fail with recovery point volume not available after resizing OS disk
I resized the C drive partition of my DPM server (the data is on a separate dedicated array) and everything failed. I put it back but everything is still failing with the same problem as here:
DPM 2007: The recovery point volume is not available?
I've run chkdsk for a couple and both have given the following after doing 3 stages:
Windows has scanned the file system and found no problems.
No further action is required.
The backups still fail and the only error information I can find in the event logs is:
Backup job for datasource: Online\<VM name> on production server: <host FQDN> failed.
How can I find out what the problem actually is?
Is it possible to resize the C drive containing a DPM install? If so what can it be safely resized to? It easily met the minimum requirements and I don't know of anything in the documentation that says resizing the OS disk may cause issues.
Preparing your environment for System Center 2012 R2 Data Protection Manager (DPM)Hi,
Resizing the boot partition (usually C:) should not effect DPM in any way. DPM writes directly to it's volumes contained in the storage pool and not through the mount points on the C: drive. So is the DPM UI showing
missing volume next to some data sources ? Try doing a DPM disk rescan and see if that removes the missing volume flag.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights. -
Scheduled TMS_ # TMS_TP_IMPORT background jobs fail with error code 0232
Is anyone else having the problem we've just encountered since upgrading to ECC 6.0 and CRM 2007, where once setting up the automatic import ALL background jobs, to have all of the Transport Change Requests imported into the Q-Prod testing systems automatically, fail after several successful runs?
After setting up the automatic import background job to run every 15 minutes, the first few run successfully (importing any transports as it should), then the transports stop being imported.
The background jobs continue to run, but have the following in the job log overviews CRM 2007 - "Could not start transport control program tp". R\3 ECC 6.0 - "Transport control program tp ended with error code 0232".
Only by deleting the background job and recreating it (or manually importing) from STMS, can the transports continue to be imported. Although I have noticed that there are multiple tp.exe processes started, which need to be deleted before the STMS and TMS Background jobs work again.
The:
DB is SQL Server 2005
disp+work is at version 7000.150.14.48855
R3Trans is at version 7000.149.14.47907
tp is at version 7000.144.14.39594
Any suggestions on how to cure this for good?Thanks All
FYI
SAP first suggested the following notes: 19466, 1150361, and to add a Startup profile parameter rfc/use_gwstart = 1. Which was only partially successful.
I guess it had more to do with RFC processes hanging than it did with the tp, which was fixed in a later kernel patch level.
I've upgraded the kernel to the latest (70000.181.0.0) and my problem was fixed.
Ken -
DB13 Job fail with error :Database instance is shut down
Hi All,
Recently we upgraded our Redhat Linux, Database from 9i to 10.2.0.4 and SAP Kernel 640 to patch 347.
Now my system is working fine but in DB13 jobs I am getting error:
Job started
Step 001 started (program RSDBAJOB, variant &0000000000763, user ID SHMITTAL)
Execute logical command BRCONNECT On host saturn
Parameters: -u / -c -f stats -t ALL
BR0801I BRCONNECT 6.40 (52)
BR0805I Start of BRCONNECT processing: cegcuesi.sta 2011-06-16 06.26.52
BR0484I BRCONNECT log file: /oracle/PP0/sapcheck/cegcuesi.sta
BR0613E Database instance PP0 is shut down
BR0806I End of BRCONNECT processing: cegcuesi.sta2011-06-16 06.26.52
BR0280I BRCONNECT time stamp: 2011-06-16 06.26.52
BR0804I BRCONNECT terminated with errors
External program terminated with exit code 3
BRCONNECT returned error status E
Job finished
it is looking to me that somewhere still Oracle path is mentioned as of 9i version.
I checked environment variables, Default profile, initSID.sap but not find any issue, checked on google it says check tnsnames.ora, I checked that file but there is no such parameter for Oracle home.
Please suggest to resolve the issue.
Shivam MittalShivam Mittal wrote:
BR0801I BRCONNECT 6.40 (52)
Hi,
allthough I am not quite sure, because 9i is sooo old and 10.2 is even near out of maintanance,
Kernel 6.40 is linked against a version 9 client thus forcing sidadm to work with a 9i environment.
brtools 6.40 working as orasid (environment 10g)
and failing as sidadm (in the 6.40 plain kernel environment (oracle 9i))
is perfectly normal as far as I remember.
I think there was a section in the version 10 upg-guide whichg says to switch brtools to version 7.0, even if you use a 6.40 kernel exactly for this reason. This is, because version 7.0 brtools are hardlinked against the instantclient 10.
So these work even as sidadm with an environment set to a version 9 client.
I can not verify exactly, any more, cause all our 6.40 systems have recently gone to oracle version 11
requireing the switch to the 6.40 EX2 kernel and brtools 7.20.
Try brtools 7.00 on current patchlevel.
Volker -
Backup job failing with error ORA-12546: TNS:permission denied
Hi All
This is regarding one backup job running on windows server 2003 failing with below error.. when we are running this job manually that is running fine.. but not running from windows scheduler.
its 9.2.0.1 and the 32 bit... windows 2003 64 bit
Recovery Manager: Release 9.2.0.1.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-12546: TNS:permission denied
Please help.
Edited by: 811427 on Sep 6, 2011 12:36 AMI assume you installed Oracle as "Administrator" user. If so, make sure you are running the job from the same user. Optionally open "services.msc" and go to the "ORCL Service" or whatever it may and check "Log on" tab. It should be "logon as" value should be "Local system". If you are using a domain then give credentials accordingly. Make sure you are part of "DBA" group.
The ORA-12546 TNS:permission denied points to "Insufficient permissions to trace/log files" - check the trace/log destination is writable and requisite permissions are given. -
The error message is: RemoteOperationException: Failed to establish input-streaming thread
In researching this, there was an article that talked about increasing the ThreadPool to MEDIUM. But this didn't help.
If I retry the backup after it fails, it runs without any problem.
This is GC 10.2.0.3 on Sun Solaris. Does anyone have a workaround for this?
Thanks.Try this script...
File Naming Format DBname_YYYYDDMM.BAK
DECLARE @name VARCHAR(50) -- database name
DECLARE @path VARCHAR(256) -- path for backup files
DECLARE @fileName VARCHAR(256) -- filename for backup
DECLARE @fileDate VARCHAR(20) -- used for file name
-- specify database backup directory
SET @path = 'C:\Backup\'
-- specify filename format
SELECT @fileDate = CONVERT(VARCHAR(20),GETDATE(),112)
DECLARE db_cursor CURSOR FOR
SELECT name
FROM master.dbo.sysdatabases
WHERE name NOT IN ('master','model','msdb','tempdb') -- exclude these databases
OPEN db_cursor
FETCH NEXT FROM db_cursor INTO @name
WHILE @@FETCH_STATUS = 0
BEGIN
SET @fileName = @path + @name + '_' + @fileDate + '.BAK'
BACKUP DATABASE @name TO DISK = @fileName
FETCH NEXT FROM db_cursor INTO @name
END
CLOSE db_cursor
DEALLOCATE db_cursor
File Naming Format DBname_YYYYDDMM_HHMMSS.BAK
If you want to also include the time in the filename you can replace this line in the above script:
-- specify filename format
SELECT @fileDate = CONVERT(VARCHAR(20),GETDATE(),112)
with this line:
-- specify filename format
SELECT @fileDate = CONVERT(VARCHAR(20),GETDATE(),112) + REPLACE(CONVERT(VARCHAR(20),GETDATE(),108),':','')
Raju Rasagounder Sr MSSQL DBA -
Hi, experts
I'm trying to configure a lab environment according tutorial http://www.msexchange.org/articles-tutorials/exchange-server-2010/compliance-policies-archiving/rights-management-server-exchange-2010-part3.html
After completing configuration, I execute cmdlet Set-IRMConfiguration -InternalLicensingEnabled $true, but get error
The remote certificate is invalid according to the validation procedure. ---> The underlying connection was closed: Cou
ld not establish trust relationship for the SSL/TLS secure channel. ---> Failed to get Server Info from https://exhv-65
94/_wmcs/certification/server.asmx.
+ CategoryInfo : InvalidOperation: (:) [Set-IRMConfiguration], Exception
+ FullyQualifiedErrorId : C810E449,Microsoft.Exchange.Management.RightsManagement.SetIRMConfiguration
Then I run cmdlet Test-IRMConfiguration -Sender [email protected] and get error
Results : Checking Exchange Server ...
- PASS: Exchange Server is running in Enterprise.
Loading IRM configuration ...
- PASS: IRM configuration loaded successfully.
Retrieving RMS Certification Uri ...
- PASS: RMS Certification Uri: https://server1/_wmcs/certification.
Verifying RMS version for https://server1/_wmcs/certification ...
- WARNING: Failed to verify RMS version. IRM features require AD RMS on Windows Server 2008 SP2 with the
hotfixes specified in Knowledge Base article 973247 (http://go.microsoft.com/fwlink/?linkid=3052&kbid=973247)
or AD RMS on Windows Server 2008 R2.
Microsoft.Exchange.Security.RightsManagement.RightsManagementException: Failed to get Server Info from https:
//server1/_wmcs/certification/server.asmx. ---> System.Net.WebException: The underlying connection was clos
ed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authenticatio
n.AuthenticationException: The remote certificate is invalid according to the validation procedure.
at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest async
Request, Exception exception)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest async
Request)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest async
Request)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest async
Request)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequ
est asyncRequest)
at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Obje
ct state)
at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.ConnectStream.WriteHeaders(Boolean async)
--- End of inner exception stack trace ---
at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Exchange.Security.RightsManagement.SOAP.Server.ServerWS.GetServerInfo(ServerInfoRequest[] req
uests)
at Microsoft.Exchange.Security.RightsManagement.ServerWSManager.ValidateServiceVersion(String featureXPath
--- End of inner exception stack trace ---
at Microsoft.Exchange.Security.RightsManagement.ServerWSManager.ValidateServiceVersion(String featureXPath
at Microsoft.Exchange.Management.RightsManagement.IRMConfigurationValidator.ValidateRmsVersion(Uri uri, Se
rviceType serviceType)
at Microsoft.Exchange.Management.RightsManagement.IRMConfigurationValidator.TryGetRacAndClc()
OVERALL RESULT: PASS with warnings on disabled features
From the error message, this issue seem to related with SSL/TLS connection. So I go back to check configuration and find out a difference to tutorial. Current SCP url is https://server1/_wmcs/certification, but in tutorial it is https://server1:433/_wmcs/certification.
On my opinion, I don't think it is the real reason.
So, how can I resolve this error? Could you give me some suggestion? Thanks in advance.
System Info:
Windows Server 2008 R2 + Exchange Server 2010 SP3 RTMHi
Please have a try with the solution on this KB article
“Error message when you try to test access from the Microsoft Dynamics CRM E-mail Router: "Incoming Status: Failure - The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel"”
http://support.microsoft.com/kb/954584/en-us
Cheers
Zi Feng
TechNet Community Support -
OEM12c jobs fail with "Error attempting to invoke console command"
Hi gurus,
I'm wondering if someone could help me on this issue.
When I try to execute a job it remains in "Running" state for a long time periord and looking at the jobs details I can see something like this:
Execution: DB11G.WORLD
DB11G.WORLD Running Aug 29, 2012 10:17:31 AM GMT+02:00 57.9 minutes
Step: DeployDriver DB11G.WORLD Scheduled
Doing drilldown in "Scheduled" hiperlynk the message displayed is that:
Error attempting to invoke console command, retrying
And this is the Tip offered by oem:
TIP: Management Service from which the job step was dispatched.
Everything seems to be working even the Management Service, but any job launched fail in the same way.
Environment:
Oem12c 12.1.0.1.0 with last patch
Oracle Linux 5.7
DB Oracle 11gr2
Any suggestion on this issue will be welcome.
Thanks,
Carlos.Thanks Eric for your feedback.
It seems that the problem was related with target "Oracle Authorization Policy Manager" because this target was down and after restart OMS and check that this target was up again all pending jobs worked and finished.
However the job_queue_processes value was a good point to take into account so I increase this parameter just in case.
Thanks,
Carlos.
QUERY STATUS = SOLVED -
Bakground job failed with error EXSQL UNKNOWN CONNECTION
Hello,
We are scheduling job is background which connects to other system and picks up entries to update it.
The report works very well in foreground no error, no dumps, no connectivity issues.
When report is schedule in background it gives dumps throwing error 'EXSQL UNKNOWN CONNECTION' which is near the DISCONNECT statement.
All authorisation and everything is in place as job runs in foreground and also in background sometimes.
Please help.Hi Sunny,
Yes I have analysed the dumps in st22.
We have scheduled the background jobs which are exchanging data with external databases.
Sometimes these background jobs get finished and sometimes it gets cancelled and gives the above mentioned ABAP dumps.
I am not sure whether it is related to the database connectivity or something else?
Waiting for the response.
Thanks & Regards,
Prem -
Background Job cancelling with error Data does not match the job definition
Dear Team,
Background Job is getting cancelled when I run a Job on periodically but the same Job is executing perfectly when I run it manually(repeat scheduling) .
Let me describe the problem clearly.
We have a program which picks up files from an FTP server and posts the documents into SAP. We are scheduling this program as a background Job daily. This Job is running perfectly if the files contain no data. But if the file contains data the JOb is getting cancelled with the following messages.
And also the same Job is getting executed perfectly when repeat scheduling is done ( even for files with data).
Time Message text Message class Message no. Message type
03:46:08 Job PREPAID_OCT_APPS2_11: Data does not match the job definition; job terminated BD 078 E
03:46:08 Job cancelled after system exception ERROR_MESSAGE 00 564 A
Please help me in resolving this issue.
Thanks in advance,
Sai.hi,
If you have any GUI function modules used in the program of job
you cannot run it in background mode. -
Tp import fails with error "data files not transferred"
Hi colleagues,
I am working on transport requests. I had issued out the <i>tp addtobuffer SIDKxxxx <sid> pf=TP_DOMAIN_SID.PFL </i> command for a number of transport requests at OS level; but when i then try to do <i>tp import SIDKxxxxx <sid> client= u18 pf=TP_DOMAIN_sid.PFL</i>, i get this error: "Data files are not transfered</b>" in the QAS system. Everything works fine in PROD though. What could be the reason for this. I can't get it done within the application either.
Your responses appreciated.Hi,
I guess you have individual transport directories. I f you have configured the Transport Domain and added the Other Two into the Domain and configured the Transport Route. You should be able to see the Some RFC Destinations in SM59.
TMSADM@<SID>.<DOMAIN NAME>
TMSSUP@<SID>.<DOMAIN NAME>
Please check the Test connection. of all these RFC Destination. If these fail check if you have firewall issues between the system stopping the communication on Port 33<Instance No>.
Thanks,
Tanuj
Maybe you are looking for
-
How can I get music from one computer to another? Can't understand home sharing
I can't get home sharing to work for some reason. Any tips?
-
My ipod only works on my docking station. Any help would be great!
I have a 4GB ipod I got in Dec. and I got a docking station in May and I use them all the time. Well I left my ipod plugged into the docking station for a couple days, and it works fine on it, but when I tried to connect my ipod to my computer,it jus
-
HP Officejet Pro 8610 setup issues Is there a problem using a MIFI?
I just bought this HP Officejet Pro. After trying all day yesterday with your support team, it was suggested I take it back to the store. I did and have purchase another HP Officejet Pro 8610 and am having the same problems. The on button goes to s
-
Hi, I am running the following SQL on my laptop "SELECT to_number(to_char(to_date('01-apr-2010','dd-mon-yyyy'), 'd')) FROM dual" The result is "4" which is a Wednesday. This should return "5" for Thursday as the 1st of April 2010 is a Thursday. Can a
-
Importing composition from AE to Premiere Pro
I have imported a couple of compositions from After Effects to Premiere Pro. They are slideshows On the Premiere Pro timeline they are extremely show and only showing several frames. Are they still downloading/importing or do I need to try again or