Jobs on windows run time doesn't start

Hi,
actually I'm trying to run the latest lotus notes framework but the initial load job doesn't start on my production environment. The test environment runs normaly.
It seems to be a problem with the Windows runtime, as the job runs with the java runtime.
I know, there are VB-Scripts within the notes job, so the switch to java runtime was only for testing purposes.
Any suggestions?
Kind regards,
Achim Heinekamp

Hi Matt,
you made my day!
I was sure that the connection strings are right. After your hint, I've checked them and ... the connection string for the windows runtime was without password.
Kind regards,
Achim Heinekamp

Similar Messages

[SOLVED] systemd/cron as user: timer doesn't start after boot

Hello,
I've tried to follow the wiki's systemd/cron functionality article to have a systemd service to run hourly.
Everything seems to be working ok, except that the hourly timer doesn't start automatically : I have to issue a
systemctl --user timer-hourly.timer start
command every time I start the machine to get the timer running.
Can you help me understand what I'm missing to get the (user) timer to start automatically after boot?
Thanks!
My setup consists of the following files:
/home/myuser/.config/systemd/user:
drwxr-xr-x 2 myuser users 4096 Jun 25 17:30 basic.target.wants/
-rw-r--r-- 1 myuser users 217 Jun 25 10:08 db_backup.service
-rw-r--r-- 1 myuser users 232 Jun 25 10:08 test.service
-rw-r--r-- 1 myuser users 61 Jun 19 12:14 timer-hourly.target
drwxr-xr-x 2 myuser users 4096 Jun 25 10:10 timer-hourly.target.wants/
-rw-r--r-- 1 myuser users 134 Jun 19 12:14 timer-hourly.timer
/home/myuser/.config/systemd/user/basic.target.wants/:
lrwxrwxrwx 1 myuser users 50 Jun 25 10:08 timer-hourly.timer -> /home/myuser/.config/systemd/user/timer-hourly.timer
/home/myuser/.config/systemd/user/timer-hourly.target.wants/:
lrwxrwxrwx 1 myuser users 49 Jun 13 15:51 db_backup.service -> /home/myuser/.config/systemd/user/db_backup.service
lrwxrwxrwx 1 myuser users 44 Jun 25 10:10 test.service -> /home/myuser/.config/systemd/user/test.service
timer-hourly.timer:
[Unit]
Description=Hourly Timer
[Timer]
OnBootSec=5min
OnCalendar=hourly
Unit=timer-hourly.target
[Install]
WantedBy=basic.target
timer-hourly.target:
[Unit]
Description=Hourly Timer Target
StopWhenUnneeded=yes
test.service:
[Unit]
Description=Run a test (echo) job every hour
Wants=timer-hourly.timer
[Service]
Nice=19
IOSchedulingClass=2
IOSchedulingPriority=7
ExecStart=/usr/bin/python /home/myuser/test_service.py
[Install]
WantedBy=timer-hourly.target
db_backup.service:
[Unit]
Description=Backups databases
Wants=timer-hourly.timer
[Service]
Nice=19
IOSchedulingClass=2
IOSchedulingPriority=7
ExecStart=/home/myuser/source/db_backups/db_backup.sh
[Install]
WantedBy=timer-hourly.target
test_service.py is a simple python script that appends the current time to a file, to check if the service is being run by the timer. (it is after I start the timer after boot, and runs correctly every hour)
db_backup.sh is a script that dumps a database into a text file in a mercurial repository, commits the change and pushes it to backup locations.
Last edited by fede (2014-06-25 21:06:09)

Have you tried this:
systemctl --user enable timer-hourly.timer

Windows 8.1 doesn't start Camera Window when Canon SX110IS is connected

When my Canon SX110IS is connected and turned on, Device Manager shows the camera as a connected Portable Device; and clicking Start/Control Panel/AutoPlay/Devices lists the Canon SX110IS and shows "Downloads Images from Canon Camera (Canon CameraWIndow)" as the action to take when camera is connected; however, when the camera is connected and turned on, Windows 8.1 doesn't start the CameraWindow program.

Solution: I thought that setting preferences using Windows 8.1 Control Panel / AutoPlay would make those actions happen. NOT SO! You MUST ALSO click to select "Use AutoPlay for all media and devices" at the top of the AutoPlay window. When you have your preferences set for your Media Card and your Canon Camera, AND have that also selected, the preferred actions you chose WILL take place when you either connect your camera to your computer via USB cable and turn the camera on, or insert your SD card in your computer.
In answer to why I connect via USB cable rather than inserting the SD card, it takes the same time for me to open the AV door and connect a USB cable between the camera and the computer as it does to open the battery door, remove the SD card, and insert it in the computer. So I guess it just depends on which mode you prefer to use.

Windows 8.1 doesn't start after update. BLACK SCREEN AFTER LOGIN

Before all, sorry my english, I'm brazilian and don't found the solution on the brazilian version of HP website.
After I did the updates, the system ask to restart the notebook, so I did it. And now, when I do the login, after the password page, the Windows doesn't starts. Just a Black Screen appears.
I can't open the right side window to acces the configurations, and this laptop doesn't have a battery to take out and put in again.
I had already restore the system.
So, I use my laptop to work, and it has only 4 days of use.
I need help! Thanks!

Hi,
Run through the following procedure.
Boot the computer normally and log-in.
At the black screen, hold down the ctrl and alt keys and press delete.
Select Task Manager.
Click on File and select Run new task.
Type cmd.exe - also enter a tick in the box for 'Create this task with administrative privileges' - and click Ok.
Type in the following command ( including spaces ) and hit enter.
Dism /Online /Cleanup-Image /RestoreHealth
This will take a while to complete, but when it’s finished, restart the notebook.
If the screen is still black after you log-in, once again, hold down the ctrl and alt keys and press delete.
Select Task Manager.
Click on File and select Run new task.
Type cmd.exe - also enter a tick in the box for 'Create this task with administrative privileges' - and click Ok.
Type in the following command ( there's a space between sfc and the / ) and hit enter.
Sfc /scannow
When the scan has finished, check that the result is ‘No integrity violations’, then type exit and hit enter.
Restart the notebook again.
Any change?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Run time error after starting eclipse

Hello,
after installation of the SAP Eclipse Theme Editor the following run time error is reported after each restart of eclipse:
java.lang.ClassCastException: com.sap.ur.plugins.ThemeEditor32Input cannot be cast to com.sap.ur.plugins.ThemeEditorInput
     at com.sap.ur.plugins.ThemeEditor.init(ThemeEditor.java:188)
     at org.eclipse.ui.internal.EditorManager.createSite(EditorManager.java:798)
     at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:647)
     at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:465)
     at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:595)
     at org.eclipse.ui.internal.EditorAreaHelper.setVisibleEditor(EditorAreaHelper.java:271)
     at org.eclipse.ui.internal.EditorManager.setVisibleEditor(EditorManager.java:1429)
     at org.eclipse.ui.internal.EditorManager$5.runWithException(EditorManager.java:942)
     at org.eclipse.ui.internal.StartupThreading$StartupRunnable.run(StartupThreading.java:31)
     at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
     at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134)
     at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:4041)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3660)
     at org.eclipse.ui.application.WorkbenchAdvisor.openWindows(WorkbenchAdvisor.java:803)
     at org.eclipse.ui.internal.Workbench$31.runWithException(Workbench.java:1567)
     at org.eclipse.ui.internal.StartupThreading$StartupRunnable.run(StartupThreading.java:31)
     at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
     at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134)
     at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:4041)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3660)
     at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2548)
     at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2438)
     at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:671)
     at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
     at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:664)
     at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
     at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:115)
     at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:369)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:620)
     at org.eclipse.equinox.launcher.Main.basicRun(Main.java:575)
     at org.eclipse.equinox.launcher.Main.run(Main.java:1408)
I can work with this editor anyway after choosing the project. But I still have a problem because the preview will not change when I choose a different UI element. The preview alway shows the text "welcome to the SAP ThemeEditor!". When I modify style parameters for the UI element Text the preview is modified in the right way. I already set the Internet Options for the Internet Explorer as suggested. Is it possible that the reported run time error is the reason for the preview problems? The external preview works fine.

Hi,
I would suggest you to remove NWDS, then ensure that nothing left on the disk related to NWDS, and then try a fresh install.
Best Regards,
Ervin

Run Time Error when starting photoshop elements9

Run Time error keeps crashing photoshop elements 9 when i try to start up.

Can you check the following threads:
http://forums.adobe.com/message/4124157
http://forums.adobe.com/message/4025662

(Windows XP) iTunes doesn't start

Hi,
My iTunes under Windows XP doesn't start since one week: I can see it started in the taskbar like other applications, as if it were minimized, but nothing else. No error message. If I click on it, nothing happens, if only it doesn't freeze the complete PC. I can only right click > Close.
I uninstalled all iTunes, then installed it again, and it still didn't work.
I downloaded iTunes latest version again to be sure. Still the same.
I looked for solutions over the web, but with no error message it looks difficult to find a case like mine.
Any idea someone?

Hey hervelam,
We have a great resource that will help troubleshoot this issue. It may be isolated to third-party software or plugins, which would explain why uninstalling and reinstalling iTunes has not resolved your issue. For information, please refer to the following:
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1421
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M.

Satellite A100 - Windows and BIOS doesn't start after BIOS update

Hello, I have updatet BIOS of my notebook sattelite A100.
After updating I cannot start my notebook and BIOS doesn't start.

Hey guys... I tried to update my girlfriend's BIOS on a A100 just now (the windows installer) and the procedure stoped in the middle because windows crashed while doing. Now the laptop won't start at all (obviously). I have a black screen when turning it on. No boot sounds or anything. I've already removed the AC power source and battery in case that works. I guess removing the BIOS battery won't help either since the flashing was wrong... In case that doesn't work, is there any chance i could find a BIOS from ebay or somewhere else?
Thx in advance, Jimmy..
PS. My gf is going to shoot my brains out :P

Windows Virtual Machine Doesn't Start

I recently installed a clean install of windows 7 pro 64-bit. I installed windows XP mode as described on the microsoft website followed by the update provided but when I try to open windows virtual PC nothing happens. I click on the program icon and nothing happens. When I try to open windows XP mode I get the error message "Cannot start Windows Virtual PC Host Process. Check the System event log for more detials. Server execution failed" Once I check the event log there is nothing there. The PC I am running on supports hardware virtualization and it is enabled in the bios. My coworker just installed windows XP mode on the machine right next to mine and it works fine. Can someone please tell me how to get this thing to work. Running virtual 2007 is not an option.

Same problem.
In past i've used successful windows virtual pc, but now it won't work.
I tryed uninstallind the Windows6.1-KB958559-x64.msu update and the windows xp mode and deleting the old virtual machines.
After reinstall the Windows6.1-KB958559-x64.msu update the problem returns as before.
I get this error: "Cannot start Windows Virtual PC Host Process. Check the System event log for more detials. Server execution failed"
Looking at the event viewer into "Applications and Services Logs/Microsoft/Windows/Virtual PC/Admin" i find "Virtual machine ''. Error - Server execution failed"
(0x80080005)" and just before this message i get "One or more files from the Virtual PC installation are missing. Please reinstall Virtual PC and try again."
So i tryed a lot of times uninstalling and reinstalling, unsucessfully. What i can do?
XML of "Virtual machine ''. Error - Server execution failed" error:
Log Name:      Microsoft-Windows-Virtual PC/Admin
Source:        Microsoft-Windows-Virtual PC
Date:          05/03/2010 14:00:13
Event ID:      1000
Task Category: None
Level:         Error
Keywords:
User:          Riccardo-PC\Riccardo
Computer:      Riccardo-PC
Description:
Virtual machine ''. Error - Server execution failed
(0x80080005)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Virtual PC" Guid="{A759B4BE-484C-414D-A97D-961D33C31A3D}" />
    <EventID>1000</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-03-05T13:00:13.453470800Z" />
    <EventRecordID>295</EventRecordID>
    <Correlation />
    <Execution ProcessID="5032" ThreadID="4100" />
    <Channel>Microsoft-Windows-Virtual PC/Admin</Channel>
    <Computer>Riccardo-PC</Computer>
    <Security UserID="S-1-5-21-653287977-206352491-2073433540-1000" />
</System>
<EventData>
    <Data Name="String1">
    </Data>
    <Data Name="String2">Error - Server execution failed
(0x80080005)</Data>
</EventData>
</Event>
XML of "One or more files from the Virtual PC installation are missing. Please reinstall Virtual PC and try again."
Log Name:      Microsoft-Windows-Virtual PC/Admin
Source:        Microsoft-Windows-Virtual PC
Date:          05/03/2010 13:59:43
Event ID:      45
Task Category: None
Level:         Error
Keywords:
User:          Riccardo-PC\Riccardo
Computer:      Riccardo-PC
Description:
One or more files from the Virtual PC installation are missing. Please reinstall Virtual PC and try again.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Virtual PC" Guid="{A759B4BE-484C-414D-A97D-961D33C31A3D}" />
    <EventID>45</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-03-05T12:59:43.357816300Z" />
    <EventRecordID>294</EventRecordID>
    <Correlation />
    <Execution ProcessID="4320" ThreadID="5100" />
    <Channel>Microsoft-Windows-Virtual PC/Admin</Channel>
    <Computer>Riccardo-PC</Computer>
    <Security UserID="S-1-5-21-653287977-206352491-2073433540-1000" />
</System>
<EventData>
</EventData>
</Event>

Firefox is hanging repeatly , And some times doesn't start ?

Hi , My Firefox browser is hanging many times in the day I don't know why , And sometimes It cannot be started this problim with me from firefox 3.6 and now I have Firefox 6.0.2 and still hanging .
> My OS : Windows 7 Ultimate

Hi Shahram Dehghani,
Based on my understanding, there are serious problems with this Windows Server 2012 DC: couldn't login and some important services could not run.
Please run dcdiag in the command prompt to check the situation of the DC and then tell us the error or warning message.
In addition, please help to collect the following information for further troubleshooting:
What is the error message when you could not login to the DC?
Which MMC did you use to login to the DC?
What is the error message when the services could not be started manually?
The enviroment of the AD. Is there another DC in the domain? If so, does it has the same issue?
When does this issue start appearing?
Regards,
Lany Zhang

Oracle 11g 2, Windows Service OracleDBConsole doesn't start.

Hi!
I installed ORACLE 11.2 database (11.2.0.1.0) On Windows XP SP3.
Global database name: orcl
SID : orcl11g2
At the end of installation I got the error :
+01.12.2010 14:50:17 oracle.sysman.emcp.EMDBPostConfig invoke+
WARNING: Error starting Database Control.Please execute the following command(s).
+1) Set the environment variable ORACLE_UNQNAME to Database unique name+
+2) E:\app\u_kudinov\product\11.2.0\dbhome_1\bin\emctl.bat start dbconsole+
I type
set ORACLE_UNQNAME=orclin emctl.bat
end execute:
emctl.bat start dbconsoleI get that :
D:\>E:\app\u_kudinov\product\11.2.0\dbhome_1\bin\emctl.bat status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
https://2-3-67-7:1158/em/console/aboutApplication
EM Daemon is not running.+
with error message:
Specific error of service : 2
Q: How can I start the Windows Service OracleDBConsole ?
Thanks ...
Edited by: muma on 03.12.2010 2:19

Did you check this post: http://cn.forums.oracle.com/forums/thread.jspa?threadID=1108281
Eric

2011 MacBook Pro-Sleep light blinks 3 times, doesn't start

Hi there, I was just given a 2011 MacBook Pro 15'-8GB RAM, 2.2Ghz...the medium spec'd model if I am correct. It worked fine for a little while, but now whenever I plug it into power, it does one of two things. Either it attempts to come on, hard drive spins up...and then the sleep light flashes 3 times and it powers down. OR, as soon as it gets plugged in it powers cycles indefinately until I unplug it. The sleep light comes on for maybe a second, and the hard drive spins up, then it shuts back off and repeats this until I unplug it.
Nothing has been changed from it's stock configuration to I am relatively sure that it isn't a simple RAM problem.
Any help is appreciated.
Please note that I have already tried things like clearing the SMC and reseating the RAM.

Means bad memory.

Firefox won't download. The Run menu doesn't start and nothing happens on the click here to download. I suspect Internet Explorer (which I hate) is the problem.

Can't get Firefox to download. When I click on the download it takes me to the second page but the download doesn't begin. When I select the click here link, nothing happens, it stays on the same page.

*Does the image display on the list of downloads on about:downloads
*Are there any settings on the device that blocks downloads over wifi or by certain applications?
*Is there room on the device to download the image?
*An example webpage will help further investigate.
If the notifications on Firefox have been turned off in the Android operating system, turn them back on by:
Go to Settings > Sound & notification > App notifications

Changes in shopping cart at run time doesn't reflect at approval level.

Hello experts,
I have created a shopping cart upto 4 levels based on immediate manager, category id, cost center and last manager (who will approve/reject ). It is working good so far. At 3rd level (cost center) I added a formula ( Overall value > 5.000 ). It means when overall value is greater than 5000 then only cost center is going to be displayed. It works when overall value goes above 5000. But before finishing shopping cart if user changes quantity, makes it less than previously entered (which affects overall value less than 5000 ) then at 3rd level it shows approval. This is not correct. As value goes below 5000 it should not show 3rd level approver. Where I should chnge the code ? Is there anything workng there ? Please advise. Thank you.
Best regards.

Hello Sam.
Thank you for your reply. Issue has been resolved now. It was portal issue.
Yes I am using process controlled workflow.
Best regards.

Hello, My i Mac is from 2008, the unit at times doesn't start up.(mouse lights then off with no screen) I ran Mackeeper thinking its a virus, but not. My unit is plugged into a volt regulator its a US unit 110v and here in philippines 220 V, any ideas

Hello, My I Mac is a 2008 unit. Quite offen it will not power on, mouse lights then it goes off with no screen even if i press control/command rp keys.
Some other information the unit is from USA, a 110V and now in Philippines which is 220V I have it on a 110 voltage regulator.(can i plug in to 220 v directly?) I also ran MacKeeper thinking it could be a virus, but its not, i notice if i leave unit on without shut down, the problem occurs less, thinking its a battery problem but I'm not sure.
Here in Philippines we have no Mac stores and service is not like in the USA. Any ideas of what wrong?

MacKeeper is highly invasive malware that can de-stablize your operating system. It is also unethically marketed and a rip-off.
Further opinion on it and how to uninstall MacKeeper malware:
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
This is also worth reading:
http://www.reedcorner.net/news.php/?p=245
It sounds like a faulty power unit. You need to get it professionally checked.

Jobs on windows run time doesn't start

Similar Messages

Maybe you are looking for