Windows 8.1 doesn't start Camera Window when Canon SX110IS is connected

When my Canon SX110IS is connected and turned on, Device Manager shows the camera as a connected Portable Device; and clicking Start/Control Panel/AutoPlay/Devices lists the Canon SX110IS and shows "Downloads Images from Canon Camera (Canon CameraWIndow)" as the action to take when camera is connected; however, when the camera is connected and turned on, Windows 8.1 doesn't start the CameraWindow program.

Solution: I thought that setting preferences using Windows 8.1 Control Panel / AutoPlay would make those actions happen. NOT SO! You MUST ALSO click to select "Use AutoPlay for all media and devices" at the top of the AutoPlay window. When you have your preferences set for your Media Card and your Canon Camera, AND have that also selected, the preferred actions you chose WILL take place when you either connect your camera to your computer via USB cable and turn the camera on, or insert your SD card in your computer.
In answer to why I connect via USB cable rather than inserting the SD card, it takes the same time for me to open the AV door and connect a USB cable between the camera and the computer as it does to open the battery door, remove the SD card, and insert it in the computer. So I guess it just depends on which mode you prefer to use.

Similar Messages

My iphone 4 will not open in itunes windows. when i try to connect my phone displays a message asking if i trust this computer.

my iphone will noy open in windows. when itry to connect my phone displays the message. Trust this computer? your settings and data will be accessible from this computer when connected.

Well, you downloaded a bootleg copy of iOS 7 beta and have installed it on your phone without being a developer. It has bricked your phone and you cannot get help here because doing what you did has voided your warranty. Have a nice day.

My macbook pro doesn't charge or operate when the battery is connected. When I remove it, it works fine only with the charger only

My laptop is a macbook pro 13 (mid 2010). When the battery is connected on it, the light of the magsafe adapter does not turn on, and the laptop neither. I shall note that the computer was operating normally before the battery was totally empty. I removed the battery and it operates normally. When I put it back, it's again dead, neither charges the battery, nor starts up.
What do you think is the problem about?

Thanks for your response! Resetting the SMC does not change anything.
More information: I used another MagSafe charger and it worked with the battery connected, like nothing happened. I run the apple hardware test and it showed that everything is ok! I would replace my MagSafe adapter, but except that it works fine without the battery, it also works fine on another macbook pro. I am confused! Any more advice please??

IPhone 4 doesn't start, from nothing, when I press home button (since iOS 5)

Since I updated my iPhone 4 to iOS 5, almost everyday, from nothing, I can't start the phone by pressing the home button or any other button. So I have to restart all the time it happens, it's getting annoying already!
Is it happening to someone else?
HELP!!!

Basic troubleshooting steps are restart, reset, restore from backup, restore has new device. Doesn't sound like you've been through ALL the steps yet.

SQLplus doesn't start from batch when using host comand

Hello.
We have a form to export some data from old (7) database. For that we use batch file that runs sql script.
There is button in form. The code on trigger looks like:
declare
     HostString Varchar2(50);
Begin
     HostString := 'C:\Path\File.bat';
     Host(HostString);
end;
That batch file calls another batch file:
c:
cd c:\Path
call NewFile.bat >> Data.log
And in NewFile batch we call sql script like:
c:
cd "c:\Path"
set ORACLE_HOME=c:\Oracle\Path
C:\Oracle\Path\BIN\SQLPLUS.EXE user/pass@db @C:\Path\Script.sql
@echo End
exit
In that script the code looks like:
spool c:\Path\File.txt
desc table;
spool off;
exit
If we run first batch in cmd everything works. When we use forms, form is working forever, freezes.
And Data.log file looks like:
(14:53:48,14) >c:
(14:53:48,14) >cd "c:\Path"
(14:53:48,14) >set ORACLE_HOME=c:\Oracle\Path
(14:53:48,14) >C:\Oracle\Path\BIN\SQLPLUS.EXE user/pass@db @C:\Path\Script.sql
Here it freezes, log file is locked.
We are using forms 10 on AS 10. But we must use SQLPlus 8 to connect to old database (7) in that case.
Maybe this is the problem?
Any idea why this doesn't work from forms, but works when run manually from cmd?
Thanks.
Message was edited by:
DejanH

U didnt mention version of forms and whether running in client server or web.
Incase of web note that host will execute on application server and hence u need to use webutil_host.
If u are on forms 6i/client server forms try invoking calc using host. If it works fine then u may have to use the code host('cmd /start c:\orant\bin\sqlplus.exe')
Best Regards
Rajesh ALex

MacBook Pro doesn't want to boot when cd rom is connected

Hello,
I have an issue with my MacBook Pro (2009) model.
When I'm connecting CD-ROM (internal one) computer doesn't want to boot nither from DC ROM nor from HDD.
As soon as I am dissconecting CD ROM system is booting up without any problem.
Please advise.
Thanks,
Dubbster

Hi Dubbster,
Welcome to the Apple Support Communities!
I understand that your MacBook Pro is not booting when you have the Mac OS X Install DVD inserted. Do you get any boot options when you hold down the Option key during startup? Please reference the following article and let me know if you need further assistance.
Startup Manager: How to select a startup volume
http://support.apple.com/kb/ht1310
I hope this helps,
-Joe

Satellite P30-109 doesn't run at power when AC adaptor is connected

When I unplug of the charger from the socket he goes automatically to battery: until now nothing wrong with it;
The point is that when I the plug back the charger in the socket he remains on the battery till when, after approximately 20 minutes with the high performance plan, begins to "pip" (battery less then 10%) and goes in "coma".
Normal discussed it should automatically go on net power and fill up the battery
Just after I shut it down, I disconnect the battery and connect it again then it begins to charge again.
The battery is not new, usage level according to Everest 65%; he lasts approximately 20 minutes on this moment for me more than enough. I just need to displace the pc from one room to the other for a presentation.
Even if I'd not use the battery I'd still have an issue: the plug to the rear side of the notebook is not really tight: sometimes it looses contact: without battery it'd abruptlly switch off.

If hardware is not defective something like this should not happen. You can disconnect AC power supply 100 times a day but every time if the notebook is connected to AC power supply again the battery should be charged.
I can really not say what is wrong there but it can be some power supply electronic issue. It seems to be that this electronic is somehow confused. Sorry but just exact test by service can give more answers.

Integrated wls doesn't start

Hi,
I'm using JDev 11.1.1.3.
I was working normally but suddenly the integrated wls doesn't start anymore.
When I start the server, the log stops here
<Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
Although the log says "RUNNING", the server is not running. If I test, through the server properties, all tests fail, except the HTTP.
I tried to delete the cache folder and re-install the middleware... the problem remains.
Thanks.

Hi,
bellow follows the entire log.
I can't launch the console... the log shows this message "<Logger><error> ServletContainerAdapter manager not initialized correctly."
*** Using port 7101 ***
D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\ext\jdbc\oracle\11g\ojdbc6dms.jar;C:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.3.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;.;C:\Program Files\Java\jre6\lib\ext\QTJava.zip
PATH=C:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\oraclexe\app\oracle\product\10.2.0\server\bin;D:\ORACLE\PRODUCT\10.2.0\CLIENT_3\BIN;D:\ORACLE\PRODUCT\10.2.0\CLIENT_2;C:\Windows\SYSTEM32;C:\Windows;C:\Windows\SYSTEM32\WBEM;C:\Windows\SYSTEM32\WINDOWSPOWERSHELL\V1.0\;C:\PROGRAM FILES\TORTOISESVN\BIN;C:\Oracle\Middleware\jdeveloper\jdev\bin;C:\Oracle\Middleware\jdeveloper\ant\bin;C:\Oracle\Middleware\jdk160_14_R27.6.5-32\bin;C:\Program Files\QuickTime\QTSystem\;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Oracle\Middleware3\wlserver_10.3\server\lib\DemoTrust.jks -Dhttp.proxyHost=proxy.link.pt -Dhttp.proxyPort=3128 "-Dhttp.nonProxyHosts=*.msdev.pt|*.linkcom.pt|*sgps*|*sonae*|*mch*|172.20.*.*|*.nvsd.local|192.168.*.*|194.117.36.*|*.aitec.pt|*.link.pt|localhost|localhost.localdomain|127.0.0.1|::1|pwpmedeiros.aitec.pt|pwpmedeiros" -Dhttps.proxyHost=proxy.link.pt -Dhttps.proxyPort=3128 "-Dhttps.nonProxyHosts=*.msdev.pt|*.linkcom.pt|*sgps*|*sonae*|*mch*|172.20.*.*|*.nvsd.local|192.168.*.*|194.117.36.*|*.aitec.pt|*.link.pt|localhost|localhost.localdomain|127.0.0.1|::1|pwpmedeiros.aitec.pt|pwpmedeiros" -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Ddomain.home=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1 -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1 -Doracle.server.config.dir=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.security.jps.config=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
<30/Ago/2011 18H01m BST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 16.0-b13 from Sun Microsystems Inc.>
<30/Ago/2011 18H01m BST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 >
<30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<30/Ago/2011 18H01m BST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<30/Ago/2011 18H01m BST> <Notice> <LoggingService> <BEA-320400> <The log file D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<30/Ago/2011 18H01m BST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00004. Log messages will continue to be logged in D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<30/Ago/2011 18H01m BST> <Notice> <Log Management> <BEA-170019> <The server log file D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<30/Ago/2011 18H01m BST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<30/Ago/2011 18H01m BST> <Notice> <LoggingService> <BEA-320400> <The log file D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<30/Ago/2011 18H01m BST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00004. Log messages will continue to be logged in D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<30/Ago/2011 18H01m BST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[13]" is now listening on 0:0:0:0:0:0:0:1:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[12]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on fe80:0:0:0:289b:22c3:bcf6:2bce:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Warning> <Server> <BEA-002611> <Hostname "pwpmedeiros.aitec.pt", maps to multiple IP addresses: 169.254.251.192, 192.168.59.64, 192.168.181.1, 192.168.159.1, fe80:0:0:0:8935:43d7:b990:fbc0%17, fe80:0:0:0:289b:22c3:bcf6:2bce%18, fe80:0:0:0:e437:fbfb:c9ee:9352%19>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 192.168.59.64:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[10]" is now listening on fe80:0:0:0:0:100:7f:fffe:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.159.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.181.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[9]" is now listening on fe80:0:0:0:0:5efe:c0a8:b501:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:e437:fbfb:c9ee:9352:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[7]" is now listening on 169.254.251.192:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[8]" is now listening on fe80:0:0:0:8935:43d7:b990:fbc0:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[11]" is now listening on fe80:0:0:0:f102:6891:b891:3efd:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:0:5efe:a9fe:fbc0:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:0:5efe:c0a8:3b40:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>

Satellite C55-A-1DC doesn't start anymore

My computer doesn't start anymore!
When I push the on button, everything is going like it supposed to go,until you see the screen with:
Toshiba
Leading Innovation >>>
And then it just stays stuck at that for a while, and then it just goes black!!
I don't know what to do anymore :(
Please help me!!
(sorry for my bad english:( )

Are you able to access the BIOS?
Check this by pressing the F2 button after powering on the unit.
If this isnt possible, there must be some kind of hardware problem (motherboard, RAM).
In case you could access the BIOS, check the first BIOS page. Usually the HDD should be listed there. HDD name, size information should be visible.
In case this HDD isnt listed, I assume your HDD is faulty and should be replaced.
Of course, you would need to reinstall the system once again.
In case the HDD is listed in BIOS, I would recommend you to boot using the Recovery disk (or another Windows installation disk) in order to reinstall the system.

Dremweaver CC doesn't start on Mac os maverick

Hi
I've installed Dreamwear CC but it doesn't start... when i click on it, simply nothing happen.
i've read in forum some solutions and tryed but without success ( uninstalled java ecc...) but seem's nobody's had my problem...
No problem with other apps ( i've complete CC suite).
If can be helping on my mac there's yet installed old version of dw (CS5)
...any suggestion??
Thanks
Giovanni

Hi ben,
Thanks for advice.
I read all info but my configuration doesn't have nothing wrong....
Anyway i SOLVED downloading directly dreamweaver from adobe site ( before i had try to install from creative clud manager), then login with my account to activate it.
Giovanni

Music doesn't start

The music from my Iphone 4S (ios 5.1) doesn't start anymor. When i click on play, the II sign appears correctly on the bootom but the track stays at 0 second.
I've restarted the app and the phone but it doesn't change anything.
THANKS

Hi Glo H,
I tried that and it didn't fix the problem...the music still starts a bit choppy (part way into the music) at the tail end of the 1st slide/beginning of second. I don't know if I mentioned earlier, that the music, when it does come in, is at the point it should be, i.e. like it started with the first slide, just not coming out of the speakers...if that makes any sense
Thanks,
Rob

Mountain Lion doesn't start, goes into terminal screen

Ever since I upgrades to Mountain Lion from Lion, my system doesn't start correctly. When I boot it, the screen goes into terminal and stops there. I usually have to give the command to exit and then command boot ant it starts up. Other times I have to shut down from terminal and restart. The apple support has not been help full at all. They say do this, do that and then want to hang up without resolving the issue. Can anyone help?

Well - I think we found the issue. It looks to be when you power up the system and turn on the wireless keyboard as it boots up, it sends a signal that triggers single user mode. This never happened with the previous Snow Leopard and Lion. It looks like I should never turn off the keyboard or mouse. They will automatically go to sleep mode after approximately 6 minutes of no system activity. When you power the system, it will send a wake signal to the two devices.
Following this advise from 2nd level tech support has proven to be successful.
This is the end of this issue for me. Thanks to all who gave me some options to try.

Doesn't start when starting as administrator. Error Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

Update firefox, it asked me to update flash, I tried to update flash but it said I had to close firefox. A box came up and said the Flash install would continue when I closed firefox. I closed all firefox windows and no update of flash occurred. I tried relaunching firefox but got the "Doesn't start when starting as administrator. Error Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." message. I rebooted the system, no improvement. I tried to run firefox as administrator and got the same message. Either I find a fix or I won't be able to use firefox and will have to go back to ie.

-> press '''CTRL''' + '''SHIFT''' + '''ESC''' to Open Task Manager -> Processes tab -> right-click '''firefox.exe''' and click '''End Process Tree''' -> close Task Manager
Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Troubleshooting plugins
* https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins
Check and tell if its working.

Beats audio doesn't start with windows

Hi,
beats audio doesn't start with windows. when i log into windows, no beats icon shows in the notification area.
it only works when i go to Control Panel and open up beats audio control panel, then the icon shows up.

Hi @MadGrin
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
How Do I Find My Model Number or Product Number?
When I checked the driver page for DV5000 I noticed it came with either XP or Vista.
Have you checked for any HP bios updates for your notebook? If not you could try that but please be aware that updating the bios does have a potential to cause damage. For this reason I suggest contacting HP support for assistance with that process .
Updating the BIOS
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Have you checked compatability for Windows 8.1. Windows compatibility Center
There is a option to scan your computer to check if your apps and device work.
Have you done all the updates for Windows 8.1?
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Satellite A205-S4607 doesn't start after windows vista update

Hello,
I was installing windows vista updates, but the battery was low and the computer turned off, then, the computer doesn´t start, only the hard disc led is light but the screen is black, please can you help me?
The model is Satellite A205 -S4607

Thanks for your advice, but the problem is very complicate, the computer doesn't boot up, only the led te HD is ligthing, I removed the HD and the memory but doesn't work, I've read that the problem could be the bios, and the recomendation is remove the battery of the board to reset the bios, but I think it is very dangerous.
Message was edited by: Nvillegas

Windows 8.1 doesn't start Camera Window when Canon SX110IS is connected

Similar Messages

Maybe you are looking for