Jobs stays in waiting state but does not ever run in target system

This usually happens when there is a network problem or the target system is down for some reason. Is there a way to ignore the waiting status so that the next scheduled job runs would be affected? If not can CPS be configured to constantly request for the actual status of the job in the target system?

Hi,
Set the below parameter on the process server of the target system for which jobs stays in waiting state.
Parameter: SAP_MaxReconnectTime value: 60
Reason: Process servers tries to connect to Target system at the time when the network issue happens and due to that It does not connect to the target SAP system and all the jobs stays in waiting status.
When you set this parameter with the value (what ever you want in Minutes), it will automatically try to reconnect to the target SAP System at every 60 min (or the value provided) when ever it loses the connection with Target system and Jobs will start processing again.
Thanks and Regards,
Vipul Kaswala

Similar Messages

Run As Account does not exist on the target system or does not have enough permissions

We are getting below alerts,
Run As Account does not exist on the target system or does not have enough permissions.
I know we can create a Run As account with low Privilege can fix this issue ,
http://blogs.technet.com/b/kevinholman/archive/2010/09/08/configuring-run-as-accounts-and-profiles-in-r2-a-sql-management-pack-example.aspx
My question here is there is any other way to fix it. I tried giving below permission for scom_act account (we used for agent installation and has local admin rights) but still same issue and
also i tried with sysadmin access for scom_act as well but no luck still having same issue , any solution would be welcome
The min. Privilege for monitor SQL server
DB Server Level
a. VIEW ANY DEFINITION
b. VIEW SERVER STATE
c. VIEW ANY DATABASE
Each DB
a. SQLAgentReaderRole database role.
b. PolicyAdministratorRole database role

Check below link
http://blog.coretech.dk/msk/run-as-account-does-not-exist-on-the-target-system-or-does-not-have-enough-permissions/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

A pop-up window accesses an URL comes up with a "Please Wait" message but does not show the document it is meant to access. this worked fine in the previous version of Firefox. Please help,

the URL in question has been allowed in Pop-up blocker.
This is a major problem as I am trying to access Contract Notes and it is therefore extremely important that i get a very quick solution to this problem.

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

After trying to update iBook application stays in waiting state

After Update iBook app, stays in waiting state . Will not open or able to delete.

Try this first ...tap the "waiting" icon and see if you can pause it. If it does pause, then tap it again and see if it will resume. If that works, repeat the same steps for each "waiting" icon.
If that didn't work, try this ....Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

I upgraded to snow leopard, since then safari does open in the dock but does not load as set in my preferences and the title page remains blank even though I have set-up a home page. I completely re-initialised safari, but no change.

I upgraded to snow leopard, since then safari does open in the dock (white dot) but does not startup as set in system preferences. Also, if I open safari, the title page remains blank even though I have set a home page under safari's preferences. I re-initialised safari, but no change.

Having put my home-page under "new windows open with home-page" solves the "blank title page problem".
One problem left: "safari" does not startup automatically as set in system preferences, whereas "mail", also set for startup DOES startup

IPad syncing stays on step 5 of 5 "waiting for items to copy" but does not copy anything... should I restore the iPad?

iPad syncing stays on step 5 of 5 “waiting for items to copy” but does not copy anything... should I restore the iPad?

Hey, I was having the same problem,, i just got mine to work. Take off everything but your apps (meaning take off pictures, music, ringtones, movies, tv shows, etc just leave on the apps) Then go up to the top and go to Store and turn off Genius. Restore your iPhone (It'll ask you to back up, click yes.) Restore from back up, Let your apps come back then when those are done add each category one by one. (i.e. click Photos -> Sync Photos and let them finish, then click something else like music) Hope this helps!

HT201415 I want to purchase a month of cellular service for my IPAD2. When I use my ITunes password, it states that I have the wrong password but does not offer a way to reset my password. Please advise.

I want to purchase a month of cellular service for my IPAD2. When I use my ITunes password, it states that I have the wrong password but does not offer a way to reset my password. Please advise.

Read through this link and maybe you'll see something that will help you:
http://www.tech-recipes.com/rx/5827/ipad-3g-activating-purchasing-att-cellular-d ata-for-the-ipad-3gwifi/

LaserJet Pro M1536dnf trouble sending fax...just says fax job added but does not send out

LaserJet Pro M1536dnf trouble sending fax...just says fax job added but does not send out. How do I repair?
Thanks!

Hi @LWest322 ,
I see that you are having issues with the fax not sending the fax. I can help you.
The settings would be under the Fax Menu button, Send Options, Send Fax Later.
I don't believe there is a option though to turn it off or on, just to set the date and time.
I can send you the reset for the printer in a private message, which resolve this issue.
In the forum beside your handle name just click on the envelope to view it.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HT2479 iMovie stays on desktop but does not want to open up so I can use it, any thoughts??

iMovie stays on desktop but does not want to open up so I can use it, any thoughts??

Hi,
I had this problem. Solution was to move mouse over taskbar icon. When Firefox displays small icon right click this and select maximise window !!! I think somehow Firefox got minimised to the taskbar and would not reopen as a full window. i.e it when you clicked the taskbar icon it would pop up and then pop back down to the taskbar again !!
Hope this helps.

Depends On Resource stay in Waiting state after reconciliation

Hi,
I've come up with the following issue (which i though was handled ootb).
I have resource A which depends on resource B.
On user creation 1 access policy trigger provisioning of resource A. At the end of the creation, resource A is in waiting state.
Then we reconcile resource B account which appear in provisioned/enabled state in OIM. But resource A stay in waiting state.
If i revoke and re assign resource A access policy role, provisioning is fired.
Is there a way to have reconciliated resource fire provisioning for dependent resource ?
We are running on OIM11gR1 BP05.
Ps : i've found this topic about the subject but it's on an older version of OIM. I haven't been able to found anything relevant in patch notes
OIM - Issue with "Depends On" Objects
Thanks in advance!

Got some responses from oracle support on this issue.
They said that it was working as intended. Anyone already faced similar issues ? What step have you implemented to make it works?
Thanks!

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

HP Desjet 2540 problem Wireless printer, printer is connected but does not print from pc

I wanted to install my HP Deskjet 2540 printer, the installation went quickly, the printer is installed wirelessly.. but I can't print. I can print from my tablet to the printer. But ofcourse I also need to print from my pc > printer. I already used the HP print and scan doctor.
when I click at print document the printer icon at the bottom appaers and says, 0 documents waiting list.
Please can somebody help me.. it's driving me crazy!

Hi 11111981,
It sounds to me like it could be an issue with the driver. What happened when you used the Print and Scan Doctor?
I suspect the best approach is to remove the driver for the printer server properties and then readd the printer using the HP Setup and Software. Use the instructions below to perform these tasks.
1. In the ‘Devices and Printers’ folder
2. Choose ‘Print server properties'.
Win XP – With no printer selected, click ‘File’ then ‘Server Properties’.
Windows Vista – With no printer selected, press ‘Alt’ then click ‘File’ then ‘Server Properties’.
Windows 7/8 and 8.1 – Select any printer in the ‘Devices and Printers’ folder and click ‘Print Server properties’ above.
3. Click on the ‘Drivers’ tab at the top of ‘Print server properties’ window
4. Choose the printer you want to uninstall and click ‘Remove’
5. Choose 'Remove driver only"
6. The next screen will give a warning, letting you know that deleting the driver package will remove it from the system. Click ‘Yes’ to say that you are sure you want to do this.
If documents are stuck in the print spooler, you may see an error, cancel any documents pending in the print queue r or try restarting the print spooler, then try to remove the driver from ‘Print server properties’ again. If it still won’t remove the package, restarting the computer should resolve this ‘in use’ error and allow the driver to be removed.
7. Open Start > All Programs > HP folder > Deskjet folder > HP Setup and Software
8. Select "Connect a new printer"
9. Follow the on screen instructions
Please let me know if this resolves the issue you are experiencing. If it does not, please run the Print and Scan Doctor again and see if there are any changes, also, please post back with the results from the Print and Scan Doctor as it may help point me in the right direction.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

The Power Supply Fan is still working, but does not appear to respond to increased loads, and its speed cannot be increased using SMCFanControl. Any suggestions?

Hi all - My mac pro 1,1 has an enigmatic problem. It's quad-core, 3Ghz, running OS X 10.7.5. The problem began some months back, when running HD video conferences, HD streaming videos and some other graphics-moderate (I won't say intense) uses, such as slide shows in Just Looking. My machine has an ATY, RadeonX1900 card and 2 monitors - both Apple displays, one being 30 inch 2560x1600, the other being 24 inch 1920x1200.
When I start those types of graphics-moderate apps, after about 5 minutes, something would crash (the monitors making a noise as it did) and the displays would both go black. The power did not appear to be fully cut off from the monitors. I think that the underlying applications, however, did not crash. So, I could still hear and speak to people during video conferences, and I could hear the sound tracks of videos.
Attempts to restart the computer and get the monitors back did not immediately work to undo the problem, if done straight away. The only way to correct the problem (so as to have the monitors work) was to wait for a few minutes and then restart.
After a lot of puzzled looking at console logs (and I confess that I am not an expert), I ran into a blank.
But, because of the timing of the crashes (after ~5minutes use) and restarts (after some minutes wait), I reasoned that the problem might be temperature related.
Once on that path of thought, I found this article:
http://worldtv.com/blog/guides_tutorials/fixing_an_overheating_mac_pro_no_expens e_required.php
I installed both Temperature Monitor and SMCFanControl. And I experimented, and got interesting results:
Now to the puzzling bit: SMCFanControl shows that the speed of the Power Supply Fan doesn't vary much, even if I use SMCFanControl to ramp fan speeds right up. All of the other fans react to SMCFanControl, going up to and above 2500rpm when commanded. But the Power Supply Fan does not. Having watched it for a few days now, the Power Supply Fan, according to AFCFanControl, never varies outside of a range from about 600-640 rpm, regardless of what I do with AFCFanControl.
Also (and not surprisingly), whenever the graphics-moderate apps run, when I ramp all the fan speeds up using SMCFanControl, Temperature Monitor shows that the all of the temperatures within the machine plummet, except in the power supply locations. Power Supply Location 2 is the worst affected. Because the Power Supply Fan does not react as the other fans do, the "crashes" still occur.
I could post some screen shots of the read outs of SMCFanControl and Temperature Monitor, although I think I have covered the key points in this post.
It seems that the Power Supply Fan is still working, but does not respond to increased loads.
Instinctively, I'm worried that if that's right, it might be a hard problem to fix. Any suggestions? Help! I would really appreciate them!
Cheers
P

Thanks for your response Grant. I had already read about, and I think excluded, dust in graphics card/fan/assembly as a cause. The entire inside of the computer, including the graphics card/fan/assembly, is as clean as a whistle. It looks clean. I've cleaned the dust out every now and then (including a few days ago). Also, my undersanding (derived from the article, linked in my first post) is that I might expect to see high temperatures in the Northbridge and memory module B if the graphics card was overheating. According to Temperature Monitor, however, locations do not increase in temperature when I run the relevant apps. Finally, the graphics card/assembly does not feel too hot to touch.
It is strange that SMCFanControl lists the Power Supply Fan as being software controllable, if that fan is not. Still, your comments are consistent with my observations, as the fan simply does not respond to software control.
There are two upsides: First, I've something of a work-around. I've worked out what temperature must be achieved in Power Supply Location 2 for a crash to occur, and I can watch that location in Temperature Monitor, terminating the process before that treshold is reached. Of course, that's not ideal. Second, ramping all the other fans up does significantly delay the onset of the problem, and makes recovery time much quicker.
Is there any donwside to peridically ramping up the other fans when running the relevant apps? Given that it causes all of the other locations to cool significantly, could this lessesn the life expecancy of the mahcine? (I don't want to run the fans up all the time - that's like sitting next to a jet ready for take off!)
Also, a correction to my first post: Yesterday, with all the other fans running on full and running an HD streaming video, the Power Supply Fan did, eventually, slowly, come up to ~740rpm, which is much higher than the ~640rpm maximum I had previously seen, and this may have aided delaying the onset of the problem.
I'm not sure where this leaves me? The problem might now be able managed. Well, sort-of. But it's not eliminated.

Clicking on an email address on a webpage, opens outlook express, but does not create a new mail, which it used to. annoying as it then means cutting & pasting the details

As I said above, clicking on an email address on a webpage, opens outlook express which is my default email client. In the past it used to also open a new mail, ready for me to type the message but now it does not. It works if I load internet explorer as the browser but does not in firefox. I prefer firefox, so can someone help me resolve this. Its so annoying to have to open a new mail then cut & paste the email details.

I posted this reply elsewhere in the support forum but I'll copy it here for you, as follows....
I had the same problem. Initially thought I needed a string (code) to run the "Create new e-mail" command for Outlook but I didn't. I did a few things that eventually made it work, but I don't know for certain which one it was so here goes.
1.) Go to Control Panel and click on Internet Properties. Go to the Programs tab and double-check that Outlook Express is your default e-mail client. (This is probably for IE).
2. Close Outlook Express. Select the RUN command from the Start Menu and type the following: <msimn /reg>. Only type the info between the brackets. Click the OK button and wait about 5 seconds. Nothing will happen on screen but the information is being silently written to the registry.
3. Open Outlook Express and go to the Tools Menu. Select Options. On the General tab, look down to the Default Messaging Programs. More than likely, the top option will say that "This application is NOT the default Mail handler" Click the button next to it that says "Make Default". This should trigger an available option in Firefox, below, if it was not already available.
4. In Firefox, go to the Tools menu. Select Options. Click on Applications. Under the column, "Content Type" look for the mailto function. In the column Action, select "Use Outlook Express (default)" if it is not already selected. "(default)" must be part of the phrase. Somehow there is code behind this option that will bring up a new e-mail in Outlook that otherwise does not work if Outlook is selected manually. (To choose Outlook manually, you will indeed have to find the string code somewhere.)

My iPod Classic 120GB is clicking and not turning on. It has been charged but does not hold charge. I am not able to restore factory settings. Error code and have tried troubleshooting options without success. Thoughts?

My iPod Classic 120GB makes a clicking noise when syncing with iTunes and will not sync. It will not turn on at this time and has been charged but does not hold the charge. After trying to sync, iTunes states that iPod must be restored. Have tried to do this but not successful, I receive an error code and have done the troubleshooting steps for the error and I am still not able to sync or use my iPod. HELP?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

Jobs stays in waiting state but does not ever run in target system

Similar Messages

Maybe you are looking for