Join Tables in Connect BY

Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Hi, I have the following Example. i am getting the require output if i hardcode the values in START WITH CLAUSE
but instead of hard coading the values how can i join the table .
WITH Current_ids AS (SELECT   100 ID FROM DUAL
                     UNION
                     SELECT   105 ID FROM DUAL),
    Hirerchy AS (SELECT   100 ID, 101 parent_id FROM DUAL
                 UNION ALL
                 SELECT   101 ID, 102 parent_id FROM DUAL
                 UNION ALL
                 SELECT   102 ID, 103 parent_id FROM DUAL
                 UNION ALL
                 SELECT   103 ID, 104 parent_id FROM DUAL
                 UNION ALL
                 SELECT   105 ID, 106 parent_id FROM DUAL
                 UNION ALL
                 SELECT   106 ID, 107 parent_id FROM DUAL
                 UNION ALL
                 SELECT   107 ID, 108 parent_id FROM DUAL)
    SELECT   CONNECT_BY_ROOT (ID) ID,
             TRIM (SYS_CONNECT_BY_PATH (B.id, ' ') || ' ' || B.parent_id) PATH
      FROM   Hirerchy b
     WHERE   CONNECT_BY_ISLEAF = 1
START WITH   b.id IN (101, 105) /******** Change this to get the values from Current_ids ********/
CONNECT BY   PRIOR b.parent_id = b.id
output
ID     PATH
101     101 102 103 104
105     105 106 107 108Thanks Every one for the Support and Help

I'm sorry . is this a trick? :)
WITH Current_ids AS (SELECT   101 ID FROM DUAL
                     UNION
                     SELECT   105 ID FROM DUAL),
    Hirerchy AS (SELECT   100 ID, 101 parent_id FROM DUAL
                 UNION ALL
                 SELECT   101 ID, 102 parent_id FROM DUAL
                 UNION ALL
                 SELECT   102 ID, 103 parent_id FROM DUAL
                 UNION ALL
                 SELECT   103 ID, 104 parent_id FROM DUAL
                 UNION ALL
                 SELECT   105 ID, 106 parent_id FROM DUAL
                 UNION ALL
                 SELECT   106 ID, 107 parent_id FROM DUAL
                 UNION ALL
                 SELECT   107 ID, 108 parent_id FROM DUAL)
    SELECT   CONNECT_BY_ROOT (ID) ID,
             TRIM (SYS_CONNECT_BY_PATH (B.id, ' ') || ' ' || B.parent_id) PATH
      FROM   Hirerchy b
     WHERE   CONNECT_BY_ISLEAF = 1
--START WITH   b.id IN (101, 105) /******** Change this to get the values from Current_ids ********/
START WITH   b.id IN (select id from current_ids)
CONNECT BY   PRIOR b.parent_id = b.idSeems to work for me.
Of course, you had 100 in the Current_ids .. and 101 in your hardcoding .. once I changed that, they matched. shrug

Similar Messages

  • Select distinct problem with muliple join tables, help needed

    Hi,
    I have two main tables. Each has its of sub joined tables.
    guest_id_for_reservation connects two major tables. This has
    to be that way
    because my guest may change the room status from single to
    double (and the
    similar exceptional requests).
    guests reservation
    guest_id_for_reservation
    countrytable hoteltable
    delegationtable roomtype
    I form a query. I want to select distinct those results. But
    it does not
    work.
    If I do not include any table related to reservation table
    and its sub
    joined tables (disregarding guest_id_for_reservation), it
    works.
    Is there a specific syntax for select distinct of this type
    or any
    workaround.?
    Thank you
    Hakan

    Hi I'm still battling with this - have connected the AX to my Imac via ethernet and it shows up fine in Airport Utility. Status light is green and it says its set up to connect to my existing wireless network using wireless connection. Security in Network Preferences is the same for both: WPA2 Personal.
    So I don't think there's a problem with the AX, and my current wireless network (BT Home Hub) is working fine.
    And when I restore factory settings Airport Utility can see the AX before updating settings so the wireless side of AX must work too.
    I'm figuring it must be something about the settings that mean AU can't see it anymore. But I can't work out what, since security is the same.
    Any ideas would be great!

  • Joining tables : Smart Access Connection

    Here's my scenario...
    I have data from 1 system existing as standard HANA tables.
    I have data from a second system, coming into HANA as a Smart Access Connection.
    My task is to build queries against each system's tables to obtain relevant data from each system, and then a top level query to join system A data to system B data.
    I'm from a SQL Server background, so my natural instinct is to NOT to join tables from linked servers directly to 'local' tables.
    I would normally query the remote source, stage the required data into a local temporary table, and then join local-to-local.
    However, I am unsure as to the best approach in this new world of HANA.
    I did some reading here : SAP HANA Smart Data Access - Using the SAP HANA Database - SAP Library
    "SAP HANA Smart Data Access optimizes execution of queries by moving processing as far as possible to the database connected via SAP HANA Smart Data Access. The SQL queries then work in SAP HANA on virtual tables. The SAP HANA Query Processor optimizes the queries and executes the relevant part in the connected database, returns the result to SAP HANA and completes the operation"
    .. but this is still a bit vague to me, and I am not sure that it was intended to be read in relation to simply querying the remote connection in isolation, or in queries involving other sources as well.
    Would anyone be able to clarify, or point me to better suited reading material ?
    many thanks for any pointers on this ....

    Not possible within SQL Dev.
    It pains me to suggest this.. but the simplest thing to do is to use an external table in Access to link to Oracle and make your joins in Access. I used to do it all the time and access is fairly good at only grabbing what is necessary from oracle. The only other product that comes to mind that does this type of operation is crystal reports.

  • Am inserting only one table in a join table view

    am in Jdeveloper 11.1.2.1.0
    hi i have the following view am only able to insert in one table,which is SMS_PARTY_ADDRESS,am not able to insert to the othe join table which is property, my view is
    <?xml version="1.0" encoding="windows-1252" ?>
    <!DOCTYPE ViewObject SYSTEM "jbo_03_01.dtd">
    <!---->
    <ViewObject
      xmlns="http://xmlns.oracle.com/bc4j"
      Name="smsProp_partyAddress"
      Version="11.1.2.60.81"
      BindingStyle="OracleName"
      CustomQuery="true"
      PageIterMode="Full"
      UseGlueCode="false">
      <DesignTime>
        <Attr Name="_isExpertMode" Value="true"/>
      </DesignTime>
      <Properties>
        <SchemaBasedProperties>
          <LABEL
            ResId="sms1100.smsProp_partyAddress_LABEL"/>
        </SchemaBasedProperties>
      </Properties>
      <ViewAccessor
        Name="Sub_lov1"
        ViewObjectName="sms1100.Sub_lov"
        RowLevelBinds="true"/>
      <ListBinding
        Name="LOV_Town"
        ListVOName="Sub_lov1"
        ListRangeSize="-1"
        ComboRowCountHint="10"
        NullValueFlag="none"
        MRUCount="0">
        <AttrArray Name="AttrNames">
          <Item Value="Town"/>
        </AttrArray>
        <AttrArray Name="DerivedAttrNames">
          <Item Value="Suburb"/>
          <Item Value="PostalCode"/>
          <Item Value="TowId"/>
        </AttrArray>
        <AttrArray Name="ListAttrNames">
          <Item Value="Town"/>
          <Item Value="Suburb"/>
          <Item Value="PostalCode"/>
          <Item Value="Id"/>
        </AttrArray>
        <AttrArray Name="ListDisplayAttrNames">
          <Item Value="Town"/>
          <Item Value="Suburb"/>
          <Item Value="PostalCode"/>
          <Item Value="DsdRegion"/>
          <Item Value="ServiceDeliveryArea"/>
        </AttrArray>
        <DisplayCriteria/>
      </ListBinding>
      <SQLQuery><![CDATA[SELECT SmsPartyAddress.ADDRESS_LINE1,
           SmsPartyAddress.ID,
           SmsPartyAddress.ADDRESS_LINE2,
           SmsPartyAddress.ADDRESS_LINE3,
           SmsPartyAddress.ADDRESS_LINE4,
           SmsPartyAddress.ADDRESS_TYPE_IND,
           SmsPartyAddress.PAR_ID,
           SmsPartyAddress.PROP_ID,
           SmsPartyAddress.START_DT,
           SmsProperties.TOW_ID,
           SmsProperties.ID AS ID1,
           SmsProperties.ADDRESS_LINE,
           SmsProperties.ERF_NO,
           SmsProperties.WAR_ID,
           SmsProperties.ZONE,
            DECODE(TOW1.TOWN,NULL,TOW.TOWN,TOW1.TOWN)TOWN ,
           TOW.TOWN SUBURB,
           POSTAL_CODE
    FROM SMS_PARTY_ADDRESS SmsPartyAddress, SMS_PROPERTIES SmsProperties,
    SMS_TOWNS TOW
        ,SMS_TOWNS TOW1
        ,SMS_POSTAL_CODES PCOD
    WHERE SmsPartyAddress.PROP_ID = SmsProperties.ID(+)
    and TOW.PCOD_ID = PCOD.ID
        AND TOW.TOW_ID = TOW1.ID (+)
        --and TOW1.ID = SMSPROPERTIES.TOW_ID(+)
        and TOW.ID = SMSPROPERTIES.TOW_ID
        and SmsPartyAddress.prop_id = SmsProperties.id
         CONNECT BY PRIOR TOW.TOW_ID = TOW.ID]]></SQLQuery>
      <EntityUsage
        Name="SmsPartyAddress"
        Entity="sms1100.SmsPartyAddress"/>
      <EntityUsage
        Name="SmsProperties"
        Entity="sms1100.SmsProperties"
        Association="sms1100.proppaddAssociation"
        AssociationEnd="sms1100.proppaddAssociation.SmsProperties"
        SourceUsage="sms1100.smsProp_partyAddress.SmsPartyAddress"
        ReadOnly="true"
        Reference="true"
        DeleteParticipant="false"
        JoinType="LEFT OUTER JOIN">
        <DesignTime>
          <AttrArray Name="_srcAttributes">
            <Item Value="sms1100.SmsPartyAddress.PropId"/>
          </AttrArray>
          <AttrArray Name="_dstAttributes">
            <Item Value="sms1100.SmsProperties.Id"/>
          </AttrArray>
        </DesignTime>
      </EntityUsage>
      <ViewAttribute
        Name="AddressLine1"
        PrecisionRule="true"
        EntityAttrName="AddressLine1"
        EntityUsage="SmsPartyAddress"
        AliasName="ADDRESS_LINE1"/>
      <ViewAttribute
        Name="Id"
        IsUpdateable="while_insert"
        PrecisionRule="true"
        EntityAttrName="Id"
        EntityUsage="SmsPartyAddress"
        AliasName="ID"/>
      <ViewAttribute
        Name="AddressLine2"
        PrecisionRule="true"
        EntityAttrName="AddressLine2"
        EntityUsage="SmsPartyAddress"
        AliasName="ADDRESS_LINE2"/>
      <ViewAttribute
        Name="AddressLine3"
        PrecisionRule="true"
        EntityAttrName="AddressLine3"
        EntityUsage="SmsPartyAddress"
        AliasName="ADDRESS_LINE3"/>
      <ViewAttribute
        Name="AddressLine4"
        PrecisionRule="true"
        EntityAttrName="AddressLine4"
        EntityUsage="SmsPartyAddress"
        AliasName="ADDRESS_LINE4"/>
      <ViewAttribute
        Name="AddressTypeInd"
        IsNotNull="true"
        PrecisionRule="true"
        EntityAttrName="AddressTypeInd"
        EntityUsage="SmsPartyAddress"
        AliasName="ADDRESS_TYPE_IND"/>
      <ViewAttribute
        Name="ParId"
        PrecisionRule="true"
        EntityAttrName="ParId"
        EntityUsage="SmsPartyAddress"
        AliasName="PAR_ID"/>
      <ViewAttribute
        Name="PropId"
        PrecisionRule="true"
        EntityAttrName="PropId"
        EntityUsage="SmsPartyAddress"
        AliasName="PROP_ID"/>
      <ViewAttribute
        Name="StartDt"
        IsNotNull="true"
        PrecisionRule="true"
        EntityAttrName="StartDt"
        EntityUsage="SmsPartyAddress"
        AliasName="START_DT"/>
      <ViewAttribute
        Name="TowId"
        PrecisionRule="true"
        EntityAttrName="TowId"
        IsUpdateable="true"
        EntityUsage="SmsProperties"
        AliasName="TOW_ID"
        IsPersistent="true"/>
      <ViewAttribute
        Name="Id1"
        IsUpdateable="while_insert"
        PrecisionRule="true"
        EntityAttrName="Id"
        EntityUsage="SmsProperties"
        AliasName="ID1"/>
      <ViewAttribute
        Name="AddressLine"
        IsNotNull="true"
        PrecisionRule="true"
        EntityAttrName="AddressLine"
        EntityUsage="SmsProperties"
        AliasName="ADDRESS_LINE"/>
      <ViewAttribute
        Name="ErfNo"
        IsUnique="true"
        IsNotNull="true"
        PrecisionRule="true"
        EntityAttrName="ErfNo"
        EntityUsage="SmsProperties"
        AliasName="ERF_NO"/>
      <ViewAttribute
        Name="WarId"
        PrecisionRule="true"
        EntityAttrName="WarId"
        EntityUsage="SmsProperties"
        AliasName="WAR_ID"/>
      <ViewAttribute
        Name="Zone"
        IsNotNull="true"
        PrecisionRule="true"
        EntityAttrName="Zone"
        EntityUsage="SmsProperties"
        AliasName="ZONE"/>
      <ViewAttribute
        Name="Town"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="60"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="TOWN"
        Expression="TOWN"
        SQLType="VARCHAR"
        LOVName="LOV_Town">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="60"/>
        </DesignTime>
        <Properties>
          <SchemaBasedProperties>
            <CONTROLTYPE
              Value="combo_lov"/>
          </SchemaBasedProperties>
        </Properties>
      </ViewAttribute>
      <ViewAttribute
        Name="Suburb"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="60"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="SUBURB"
        Expression="SUBURB"
        SQLType="VARCHAR">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="60"/>
        </DesignTime>
      </ViewAttribute>
      <ViewAttribute
        Name="PostalCode"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="4"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="POSTAL_CODE"
        Expression="POSTAL_CODE"
        SQLType="VARCHAR">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="4"/>
        </DesignTime>
      </ViewAttribute>
      <AttrArray Name="KeyAttributes">
        <Item Value="Id"/>
      </AttrArray>
      <ResourceBundle>
        <PropertiesBundle
          PropertiesFile="SmsFrontService.SmsFrontServiceBundle"/>
      </ResourceBundle>
    </ViewObject>i what to insert in both table partyAddress and propertyaddress,the property table the Updateable="never" and is disable,am not able to set is to always

    use this method but the column i still disable
    <EntityUsage
    Name="SmsProperties"
    Entity="sms1100.SmsProperties"
    Association="sms1100.proppaddAssociation"
    AssociationEnd="sms1100.proppaddAssociation.SmsProperties"
    SourceUsage="sms1100.smsProp_partyAddress.SmsPartyAddress"
    Reference="true"
    ReadOnly="false"
    DeleteParticipant="false"
    JoinType="LEFT OUTER JOIN">
    public class smsProp_partyAddressImpl extends ViewObjectImpl {
        protected void create(AttributeList attributeList) {
        // The view row will already have created "blank" entity instances
          SmsPropertiesImpl newProperty = new SmsPropertiesImpl();
        SmsPartyAddressImpl newPostal = new SmsPartyAddressImpl();
        //SmsPropertiesViewImpl newProperty = getSmsPropertiesView2();
        //SmsPartyAddressViewImpl  newPostal = getSmsPartyAddressView1();
        //SmsPropertiesImpl newProperty = getSmsPropertiesView2();
        //SmsPartyAddressImpl  newPostal = getSmsPartyAddressView1();
        try {
        // Let postal Address "blank" entity instance to do programmatic defaulting
        newProperty.create(attributeList);
        // Let postalAddress "blank" entity instance to do programmatic
        // defaulting passing in new SmsPropertiesImpl instance so its attributes
        // are available to the SmsPartyAddressImpl's create method.
        newPostal.create(newProperty);
        catch (JboException ex) {
        newProperty.revert();
        newPostal.revert();
        throw ex;
        catch (Exception otherEx) {
        newProperty.revert();
        newPostal.revert();
        throw new RowCreateException(true /* EO Row? */,
        "SmsProperties" /* EO Name */,
        otherEx /* Details */);
    }but the updatable="Always"
    the view is
    <?xml version="1.0" encoding="windows-1252" ?>
    <!DOCTYPE ViewObject SYSTEM "jbo_03_01.dtd">
    <!---->
    <ViewObject
      xmlns="http://xmlns.oracle.com/bc4j"
      Name="smsProp_partyAddress"
      Version="11.1.2.60.81"
      BindingStyle="OracleName"
      CustomQuery="true"
      PageIterMode="Full"
      UseGlueCode="false"
      RowClass="sms1100.smsProp_partyAddressRowImpl"
      ComponentClass="sms1100.smsProp_partyAddressImpl"
      RowInterface="sms1100.common.smsProp_partyAddressRow"
      ClientRowProxyName="sms1100.client.smsProp_partyAddressRowClient">
      <DesignTime>
        <Attr Name="_isExpertMode" Value="true"/>
        <Attr Name="_codeGenFlag2" Value="Access|Coll|Prog|VarAccess"/>
        <Attr Name="_isCodegen" Value="true"/>
      </DesignTime>
      <Properties>
        <SchemaBasedProperties>
          <LABEL
            ResId="sms1100.smsProp_partyAddress_LABEL"/>
        </SchemaBasedProperties>
      </Properties>
      <ViewAccessor
        Name="Sub_lov1"
        ViewObjectName="sms1100.Sub_lov"
        RowLevelBinds="true"/>
      <ListBinding
        Name="LOV_Town"
        ListVOName="Sub_lov1"
        ListRangeSize="-1"
        ComboRowCountHint="10"
        NullValueFlag="none"
        MRUCount="0">
        <AttrArray Name="AttrNames">
          <Item Value="Town"/>
        </AttrArray>
        <AttrArray Name="DerivedAttrNames">
          <Item Value="Suburb"/>
          <Item Value="PostalCode"/>
          <Item Value="TowId"/>
        </AttrArray>
        <AttrArray Name="ListAttrNames">
          <Item Value="Town"/>
          <Item Value="Suburb"/>
          <Item Value="PostalCode"/>
          <Item Value="Id"/>
        </AttrArray>
        <AttrArray Name="ListDisplayAttrNames">
          <Item Value="Town"/>
          <Item Value="Suburb"/>
          <Item Value="PostalCode"/>
          <Item Value="DsdRegion"/>
          <Item Value="ServiceDeliveryArea"/>
        </AttrArray>
        <DisplayCriteria/>
      </ListBinding>
      <SQLQuery><![CDATA[SELECT SmsPartyAddress.ADDRESS_LINE1,
           SmsPartyAddress.ID,
           SmsPartyAddress.ADDRESS_LINE2,
           SmsPartyAddress.ADDRESS_LINE3,
           SmsPartyAddress.ADDRESS_LINE4,
           SmsPartyAddress.ADDRESS_TYPE_IND,
           SmsPartyAddress.PAR_ID,
           SmsPartyAddress.PROP_ID,
           SmsPartyAddress.START_DT,
           SmsProperties.TOW_ID,
           SmsProperties.ID AS ID1,
           SmsProperties.ADDRESS_LINE,
           SmsProperties.ERF_NO,
           SmsProperties.WAR_ID,
           SmsProperties.ZONE,
            DECODE(TOW1.TOWN,NULL,TOW.TOWN,TOW1.TOWN)TOWN ,
           TOW.TOWN SUBURB,
           POSTAL_CODE
    FROM SMS_PARTY_ADDRESS SmsPartyAddress, SMS_PROPERTIES SmsProperties,
    SMS_TOWNS TOW
        ,SMS_TOWNS TOW1
        ,SMS_POSTAL_CODES PCOD
    WHERE SmsPartyAddress.PROP_ID = SmsProperties.ID(+)
    and TOW.PCOD_ID = PCOD.ID
        AND TOW.TOW_ID = TOW1.ID (+)
        --and TOW1.ID = SMSPROPERTIES.TOW_ID(+)
        and TOW.ID = SMSPROPERTIES.TOW_ID
        and SmsPartyAddress.prop_id = SmsProperties.id
         CONNECT BY PRIOR TOW.TOW_ID = TOW.ID]]></SQLQuery>
      <EntityUsage
        Name="SmsPartyAddress"
        Entity="sms1100.SmsPartyAddress"/>
      <EntityUsage
        Name="SmsProperties"
        Entity="sms1100.SmsProperties"
        Association="sms1100.proppaddAssociation"
        AssociationEnd="sms1100.proppaddAssociation.SmsProperties"
        SourceUsage="sms1100.smsProp_partyAddress.SmsPartyAddress"
        Reference="true"
        ReadOnly="false"
        DeleteParticipant="false"
        JoinType="LEFT OUTER JOIN">
        <DesignTime>
          <AttrArray Name="_srcAttributes">
            <Item Value="sms1100.SmsPartyAddress.PropId"/>
          </AttrArray>
          <AttrArray Name="_dstAttributes">
            <Item Value="sms1100.SmsProperties.Id"/>
          </AttrArray>
        </DesignTime>
      </EntityUsage>
      <ViewAttribute
        Name="AddressLine1"
        PrecisionRule="true"
        EntityAttrName="AddressLine1"
        EntityUsage="SmsPartyAddress"
        AliasName="ADDRESS_LINE1"/>
      <ViewAttribute
        Name="Id"
        IsUpdateable="while_insert"
        PrecisionRule="true"
        EntityAttrName="Id"
        EntityUsage="SmsPartyAddress"
        AliasName="ID"/>
      <ViewAttribute
        Name="AddressLine2"
        PrecisionRule="true"
        EntityAttrName="AddressLine2"
        EntityUsage="SmsPartyAddress"
        AliasName="ADDRESS_LINE2"/>
      <ViewAttribute
        Name="AddressLine3"
        PrecisionRule="true"
        EntityAttrName="AddressLine3"
        EntityUsage="SmsPartyAddress"
        AliasName="ADDRESS_LINE3"/>
      <ViewAttribute
        Name="AddressLine4"
        PrecisionRule="true"
        EntityAttrName="AddressLine4"
        EntityUsage="SmsPartyAddress"
        AliasName="ADDRESS_LINE4"/>
      <ViewAttribute
        Name="AddressTypeInd"
        IsNotNull="true"
        PrecisionRule="true"
        EntityAttrName="AddressTypeInd"
        EntityUsage="SmsPartyAddress"
        AliasName="ADDRESS_TYPE_IND"/>
      <ViewAttribute
        Name="ParId"
        PrecisionRule="true"
        EntityAttrName="ParId"
        EntityUsage="SmsPartyAddress"
        AliasName="PAR_ID"/>
      <ViewAttribute
        Name="PropId"
        PrecisionRule="true"
        EntityAttrName="PropId"
        EntityUsage="SmsPartyAddress"
        AliasName="PROP_ID"/>
      <ViewAttribute
        Name="StartDt"
        IsNotNull="true"
        PrecisionRule="true"
        EntityAttrName="StartDt"
        EntityUsage="SmsPartyAddress"
        AliasName="START_DT"/>
      <ViewAttribute
        Name="TowId"
        PrecisionRule="true"
        EntityAttrName="TowId"
        EntityUsage="SmsProperties"
        AliasName="TOW_ID"/>
      <ViewAttribute
        Name="Id1"
        IsUpdateable="while_insert"
        PrecisionRule="true"
        EntityAttrName="Id"
        EntityUsage="SmsProperties"
        AliasName="ID1"/>
      <ViewAttribute
        Name="AddressLine"
        IsNotNull="true"
        PrecisionRule="true"
        EntityAttrName="AddressLine"
        EntityUsage="SmsProperties"
        AliasName="ADDRESS_LINE"/>
      <ViewAttribute
        Name="ErfNo"
        IsUnique="true"
        IsNotNull="true"
        PrecisionRule="true"
        EntityAttrName="ErfNo"
        EntityUsage="SmsProperties"
        AliasName="ERF_NO"/>
      <ViewAttribute
        Name="WarId"
        PrecisionRule="true"
        EntityAttrName="WarId"
        EntityUsage="SmsProperties"
        AliasName="WAR_ID"/>
      <ViewAttribute
        Name="Zone"
        IsNotNull="true"
        PrecisionRule="true"
        EntityAttrName="Zone"
        EntityUsage="SmsProperties"
        AliasName="ZONE"/>
      <ViewAttribute
        Name="Town"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="60"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="TOWN"
        Expression="TOWN"
        SQLType="VARCHAR"
        LOVName="LOV_Town">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="60"/>
        </DesignTime>
        <Properties>
          <SchemaBasedProperties>
            <CONTROLTYPE
              Value="combo_lov"/>
          </SchemaBasedProperties>
        </Properties>
      </ViewAttribute>
      <ViewAttribute
        Name="Suburb"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="60"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="SUBURB"
        Expression="SUBURB"
        SQLType="VARCHAR">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="60"/>
        </DesignTime>
      </ViewAttribute>
      <ViewAttribute
        Name="PostalCode"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="4"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="POSTAL_CODE"
        Expression="POSTAL_CODE"
        SQLType="VARCHAR">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="4"/>
        </DesignTime>
      </ViewAttribute>
      <AttrArray Name="KeyAttributes">
        <Item Value="Id"/>
      </AttrArray>
      <ResourceBundle>
        <PropertiesBundle
          PropertiesFile="SmsFrontService.SmsFrontServiceBundle"/>
      </ResourceBundle>
    </ViewObject>am also geting this error in my view after i set readOnly="false"
    Remove updateable flag from entity usage or mark attributes as key attributes for this entity usage
    i follow your link

  • Joining tables rom HR master to documents DB?

    SAP Gurus, I seek your wisdom
    I'm trying to join tables in quickviewer that show the personal information of who created the doc.(particularly the names) in my purchasing doc. reports.
    Is there a way to get data element ERNAM to link to USRID? Or some other method. Please help.

    Hi David,
    When saving documents using ArchiveLink, the actual document is saved in the Archive server and a reference link entry is saved in the link tables within SAP Basis. The link tables used are TOA01, TOA02, TOA03 or TOAHR. When saving the documents, a unique id is generated for each document, before storing the document in the archive system. This unique id is also stored in the link tables as DOCUMENT ID.
    Using ArchiveLink, you can store any kind of document like JPG, FAX, DOC, PDF...etc. Each document class would have its own size, for eg., the same file stored as JPG file would be probably of the size 150KB, but the same file when stored as BMP file would probably be of the size 2500 KB.
    ArchiveLink supports various kinds of connections to the Archive Server. You can use HTTP or RFC connection to the Archive server. Alternately, you can also store the documents in an R/3 Database repository.
    SAP provides SAP CONTENT SERVER which uses  HTTP type of connection. Depending on your business requirement, you can determine, what kind of documents you would mostly need to save. Once this has been determined, you can calculate how many documents you are planning to store approximately in a year. This would help you calculate the size of the server that you should be taking.
    For searching documents, you can use some transactions like OAAD, OADR..etc. However, please note that ArchiveLink does not support text searches within the stored documents.
    Please let me know if you should need any further information on this.
    Best Regards,
    Sindhu Sreedharan.

  • Conditions on Outer Joined Tables

    I'm trying to understand how Discoverer handles conditions created on outer joined tables. We're using Discoverer Plus 11.1.1.3.
    I have a query using two tables connected by an outer join. While I want all records back from the first table, I don't want all records back from the outer joined table. So, if I typed the SQL directly in a SQL Editor, I would put the '(+)' in each condition. However, I find that in Discoverer, sometimes it does this, and sometimes it doesn't. If it does not put the '(+)' on all conditions as well as the join, that essentially nullifies the outer join and makes it an standard join.
    For example, I expanded an item on the outer joined table in the Items dialog to see its list of values, and selected one, to add the column to the worksheet and create a condition. No (+). But when I deleted this and created the condition using the Condition dialog, I got a (+). Then I created another condition using the condition dialog. I used the IN operator and pasted in a list (this item had no item class to choose from)--no (+).
    When I tried manually adding (+) after the item name in the condition dialog, it put quotes around the whole thing and treated it as a string.
    I can find nothing in the documentation that discusses this. Is is possible to control whether or not it uses the (+)?
    Thank you, Scott Newman

    Dear Michael,
    Last night I had a call from user who was experiencing a very strange behaviour of her Discoverer workbook.
    I replicated the issue on my machine and could not believe my eyes. A condition on an item was being ignored. I then analysed the workbook and realised it was due to a condition on an item from an outer-joined folder. I did not have the strength after a long day to deal with it and was looking forward to having some fun the next day. Firstly, I tried few tricks such as NVL, LENGTH functions in a test query in Toad. I hate to give up but I did and searched threads on this forum and opened few. The very first thread I read was this one and I laughed when I read your advice. Only until the moment I tested it in the troubled workbook. It worked like a charm. I take my hat off to you Michael. I have rarely experienced such a satisfaction when solving a tricky problem during my 9-year-long Oracle Discoverer journey. This goes straight to my little text file with interesting problems and solutions.
    Thank you very much. I owe you a beer or two.
    It is great to have an expert like you, always ready to share his knowledge with his colleagues.
    P.S.
    My apologies for this massive post, I could not resist expressing my joy and gratitude.
    Jozef Hlavaty

  • Joining tables across databases in OBIEE Physical Layer

    I was facing this problem of joining tables across databases in Physical layer of OBIEE admin tool.
    I had a requirement to combine two tables from 2 different databases A and B respectively. I had created one database object (OBIEE Object) in the physical layer and I had created two connection pools under that pointing to the required databases. I was able to view the data (right click on the table object --> popup menu option "View Data" ) though I had to go through the "Select connection Pool" window and select the required connection pool. I was able to join the tables and was able to complete the star schema in BMM and bring them up to the presentation layer. Conistency check was also successful. Everything went fine so far.
    But when I started building the report, I started getting error whenever I chose the table which was supposed to be queried by using the second connection pool. The error message was something like "table or view does not exist at OCI call OCIStmtExecute". I assume that this was happening because the systm was not able to understand which connection pool to choose (because there were two pools defined under one database object) and by default the server was choosing the first one. If anybody is having a different opinion or definite information about this, kindly update with your reply.
    I could resolve this problem after creating a separate database object with a separate connection pool defined under it, which points to the second database. Imported the required table under this database object. (Infact it was reverse. When I re-imported the table, OBIEE Admin tool, by default created its own database object and the connection pool separately for the imported table).
    Once this was done then I went ahead as usual by joining the tables across these two different database objects and modelling was already done (ofcourse with a little more tweaking since the mapping had to be redone between BMM and Physical layers). Now I could build the report in the reporting layer without encountering any error.
    Appreciate and welcome any further additions/updations/corrections regarding this issue(?).
    -MMishra.
    Edited by: user13483341 on Nov 29, 2011 8:20 AM
    Edited by: user13483341 on Nov 29, 2011 8:20 AM
    Edited by: user13483341 on Nov 29, 2011 8:24 AM

    Hi Deepak, Thanks for your reply.
    Appreciate if you can help me with another thread "possibility of multi-currency in OBIA 7.9.6.2 financial anlytics".
    - MMishra.

  • What is the better way to join table for ASE 12.5?

    To join table with T-SQL, there are 2 options:
    select * from tab1 a join tab2 b on a.id = b.id where x=y
    select * from tab1a, tab2 b where a.id = b.id and x=y
    this is only a syntax difference or there is a performance difference? which one is better for performance?

    The first query (using the join clause) is the ANSI standard way of writing joins and is usually supported by all mainstream RDBMSs.
    The second query is the T-SQL method of writing joins and may have limited re-usability with other RDBMSs.
    In most cases which one you use is usually one of preference, ie, which ever one you're comfortable with.
    From a technical perspective there are some join constructs that you cannot build with T-SQL joins, but can build with ANSI joins (eg, you may have problems in T-SQL with a table that you want to be both a) an inner table of an outer join and b) part of a equi/inner join).
    Soooo, ANSI joins provide you a lot more flexibility in coding as well as portability (between other RDBMSs).  But if you're going to work with ASE you'll still need to understand how T-SQL joins work as you'll see quite a lot of T-SQL join-based queries.

  • How can I pass multiple condition in where clause with the join table?

    Hi:
    I need to collect several inputs at run time, and query the record according to the input.
    How can I pass multiple conditions in where clause with the join table?
    Thanks in advance for any help.
    Regards,
    TD

    If you are using SQL-Plus or Reports you can use lexical parameters like:
    SELECT * FROM emp &condition;
    When you run the query it will ask for value of condition and you can enter what every you want. Here is a really fun query:
    SELECT &columns FROM &tables &condition;
    But if you are using Forms. Then you have to change the condition by SET_BLOCK_PROPERTY.
    Best of luck!

  • How to use a MAP whithout join table

    Hello
    I am still evaluating KODO ;-)
    I am using kodo 3.1.2 with an evaluation version
    linux (kernel 2.6)
    SUN JDK 1.4.2_04
    MYSQL MAX 4.0.18 -Max
    IDEA 4.0.3 and ANT 1.5.4 (to be exhaustive)
    I am wondering how to configure the following mapping involving a Map. :
    public class Translation {
    private String locale;
    private String txt;
    public class TranslatableDescription {
    /**Map of Key=locale as String; Value = {@link Translation}*/
    ==> private Map translations = new HashMap(); <==
    public void addATranslation(Translation t){
    translations.put(t.getLocale(), t);
    file package.jdo :
    <?xml version="1.0"?>
    <jdo>
    <package name="data">
    <class name="Translation"/>
    <class name="TranslatableDescription">
    <field name="translations">
    <map key-type="java.lang.String"
    value-type="tutorial.data.Translation"/>
    <extension vendor-name="kodo" key="jdbc-key-size" value="10"/>
    </field>
    </class>
    </package>
    </jdo>
    The default Mapping generate a join table : TRANS_TRANSLATION which works
    fine, but I would like to remove this table by adding a
    colonne in the "TRANSLATION" table containing the JDOID of the
    TRANSLATIONDESCRIPTION owner of this TRANSLATION.
    I have made some try like this one in the mapping file
    <class name="TranslatableDescription">
    <field name="translations">
    <jdbc-field-map type="n-many-map" key-column="LOCALE"
    ref-column.JDOID="OWNERJDOID" table="TRANSLATION0"
    value-column.JDOID="JDOID"/>
    </field>
    The schema generated in my DB is correct but when I try to persist some
    objects I have the following Exception :
    727 INFO [main] kodo.jdbc.JDBC - Using dictionary class
    "kodo.jdbc.sql.MySQLDictionary" (MySQL 4.0.18'-Max' ,MySQL-AB JDBC Driver
    mysql-connector-java-3.0.10-stable ( $Date: 2004/01/13 21:56:18 $,
    $Revision: 1.27.2.33 $ )).
    Exception in thread "main" kodo.util.FatalDataStoreException: Invalid
    argument value, message from server: "Duplicate entry '2' for key 1"
    {prepstmnt 8549963 INSERT INTO TRANSLATION0 (JDOID, LOCALESTR, OWNERJDOID)
    VALUES (?, ?, ?) [reused=0]} [code=1062, state=S1009]
    NestedThrowables:
    com.solarmetric.jdbc.ReportingSQLException: Invalid argument value,
    message from server: "Duplicate entry '2' for key 1" {prepstmnt 8549963
    INSERT INTO TRANSLATION0 (JDOID, LOCALESTR, OWNERJDOID) VALUES (?, ?, ?)
    [reused=0]} [code=1062, state=S1009]
    java.sql.BatchUpdateException: Invalid argument value, message from
    server: "Duplicate entry '2' for key 1"
         at kodo.jdbc.sql.SQLExceptions.getFatalDataStore(SQLExceptions.java:42)
         at kodo.jdbc.sql.SQLExceptions.getFatalDataStore(SQLExceptions.java:24)
         at kodo.jdbc.runtime.JDBCStoreManager.flush(JDBCStoreManager.java:594)
         at
    kodo.runtime.DelegatingStoreManager.flush(DelegatingStoreManager.java:152)
         at
    kodo.runtime.PersistenceManagerImpl.flushInternal(PersistenceManagerImpl.java:964)
         at
    kodo.runtime.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.java:813)
         at kodo.runtime.LocalManagedRuntime.commit(LocalManagedRuntime.java:69)
         at
    kodo.runtime.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:542)
         at
    tutorial.CreateTranslatableDescription.main(CreateTranslatableDescription.java:48)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.intellij.rt.execution.application.AppMain.main(Unknown Source)
    I have the feeling that KODO does try to make diffent row in the table
    "TRANSLATION0" for the TRANSLATION and the MAP.
    So, is this kind of mapping supported by KODO and if yes, how can I
    configure it.
    Thank you for your help
    Nicolas

    So, is this kind of mapping supported by KODO and if yes, how can I
    configure it.It is not directly supported. You can fake it using a one-many mapping
    (see thread: Externalizing Map to Collection of PC), but unless you must
    map to an existing schema, it's probably not worth the effort. (Note:
    also there is a bug that actually prevents this from working with 3.1.2;
    the bug is fixed for 3.1.3, but it hasn't been released yet).

  • MVC: Create a view which populates two (or more) joined tables in a single view table

    I am beginner in MVC and I would like to create a view which populates two (or more) joined tables in a single view table as described below.
    I have two tables:
    1 - Bloggers: - bloggerID (int);
                        - bloggerName (string)
    2 - Blogs: - blogID (int);
    bloggerID (int);
                    - blogTitle (string);
                    - blogImage (string)
    A blogger can have one or more blogs while one blog must be related to only one blogger.
    I would like to have a view table on my webpage as the following:
    Blogger Name
    Blog Title
    Blog Image
    Noris Gang
    Virus
    virus.jpg
    Noris Gang
    Desktops
    desktop.jpg
    Gauthier
    Books
    books.png
    John Leon
    NNNMHJhjdhj
    Nmbj.jpg
    I'm using MVC 4 (or at least 3).
    Thanks for your help.

    Hello,
    From your description, it is not very clear that what you mean about the View, if it means the View concept in database as SQL Server, your required view should be as below:
    Create view
    as
    Select Bloggers.bloggerName, Bloggers.blogTitle, Bloggers.blogImage
    From Bloggers join Blogs on Bloggers.bloggerID = Blogs. bloggerID
    If it means the UI view in MVC concept, I suggest you could ask it on the MVC forum:
    http://forums.asp.net/1146.aspx
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • What are the Pros and Cons while joining tables at DF and Universe level

    Hi Experts,
    I am new to Data federator designer. I need help on the below.
    Could you please let me know the Pros and Cons while joining the source tables in data federator
    And While joining the DF target tables in universe designer.
    Regards,
    Gana

    Hi,
    1. I have created target tables based on source tables with one to one mapping and then join all target tables in universe.
    Ex: Source tables: Infocube text tables, fact tables and 3rd party data base table
    Target tables:Target tables are same as source tables
    --- Yes this is the way to create target Tables  and join them in the universe.These target Tables gives you the flexibility  like in future your requirement is to add one more object based on some calculation which is not possible in the universe so that time you can create  one more column in the target table and do the calculation. at the same time if you are using source table you can not do anything.
    2. Created single target table with all objects of source tables and merged all sources tables data.
    Ex: Source tables: Infocube text tables, fact tables and 3rd party data base table
    Target table: Single table.
    --- This is bit complex structure to merge all tables data in the one target table.in this situation you have to put more efforts and it is more complex.basically this type of target table is useful when you are merging data by multiple source into single  or  creating one target table based on the  union of tables by adding two mapping rules or more and you can not join tables in universe.
    Better approach is first 1. create target tables based on the source tables and join them in the universe.
    Thanks,
    Amit

  • Additional field in join table for CMP EJB

    Hello,
    I'm trying to perform this task using CMP entity beans:
    The entity A has a CMR relation of cardinality m-n with entity B (bidirectional) (This is working fine).
    I want to add a parameter to the relation.
    Ex : When I find that A1 is linked to B1, I need to perform "x" times an action. x would be my parameter, and I would have kept this parameter as an additional column in the join table A_TO_B.
    Could anyone provide an example of how to perform this with CMP EJB?
    NOTE: I'm using OC4J 10g 9.0.4 standalone (and cannot change my version).
    Thanks
    Tanguy

    Manohar,
    You need to create an append structure for table VBAP (for example ZAVBAP) using SE11. In this structure you create your ZZ fields. If you need a non-SAP domain/data element for your field then you need to create it first using the same transaction and activate it. Attach ZAVBAP to VBAP so the SE11 shows:
    .APPEND in the Fields column and
    ZAVBAP in the Field type column.
    Your ZZ fields will be shown automatically.
    When you have finished then activate your ZAVBAP structure. You will notice when you go VA01 (for example) that a lot of programs are being recompiled. Don't worry. It will be ok.
    The user-exit screen number for items is 8459 (in program SAPMV45A).
    Thanks,
    Wojtek

  • Problem in joining tables

    Hi All,
    Here I am facing the problem in Joining table I have S031,s032,makt,marc,I need a field ATWRT field from CAWN table,I did't find any link for this above from tables, any one please help me how to find out.
    REPORT  ZMMTEST.
    tables:s031,s032,makt,marc.
    DATA : BEGIN OF itab1 OCCURS 0,
           matnr TYPE s031-matnr,
           lgort      TYPE s031-lgort,
           werks      TYPE s031-werks,
           spmon      TYPE s031-spmon,
           magbb      type S031-magbb,
           wagbb      type S031-wagbb,
           azubb      type S031-azubb,
           aagbb      type S031-aagbb,
           END OF itab1.
    DATA : BEGIN OF itab2 OCCURS 0,
           matnr like makt-matnr,
           maktx like makt-maktx,
           END OF itab2.
    DATA : BEGIN OF itab3 OCCURS 0,
           matnr TYPE marc-matnr,
           werks type marc-werks,
           ekgrp type marc-ekgrp,
           END OF itab3.
    DATA : BEGIN OF itab4 OCCURS 0 ,
           matnr   TYPE s032-matnr,
           lgort   TYPE s032-lgort,
           werks   TYPE s032-werks,
           mbwbest type s032-mbwbest,
           wbwbest type s032-wbwbest,
           END OF itab4.
    data : begin of itab5 occurs 0,
          objek   type ausp-objek,
           atwrt   type cawn-atwrt,
           end of itab5.
    DATA : BEGIN OF itab_final1 OCCURS 0,
           matnr      TYPE s031-matnr,
           lgort      TYPE s031-lgort,
           werks      TYPE s031-werks,
           spmon      TYPE s031-spmon,
           magbb      type S031-magbb,
           wagbb      type S031-wagbb,
           azubb      type S031-azubb,
           aagbb      type S031-aagbb,
           maktx      TYPE makt-maktx,
           ekgrp      type marc-ekgrp,
           mbwbest    type s032-mbwbest,
           wbwbest    type s032-wbwbest,
           END OF itab_final1.
    DATA : BEGIN OF itab_final OCCURS 0,
           matnr      TYPE s031-matnr,
           lgort      TYPE s031-lgort,
           werks      TYPE s031-werks,
           spmon      TYPE s031-spmon,
           magbb      type S031-magbb,
           wagbb      type S031-wagbb,
           azubb      type S031-azubb,
           aagbb      type S031-aagbb,
           maktx      TYPE makt-maktx,
           ekgrp      type marc-ekgrp,
           mbwbest    type s032-mbwbest,
           wbwbest    type s032-wbwbest,
           atwrt      type cawn-atwrt,
           END OF itab_final.
    select-options:s_matnr for s031-matnr.
    start-of-selection.
    select matnr lgort werks spmon magbb wagbb azubb aagbb
            from s031 into  table itab1
            where matnr in s_matnr.
    if not itab1[] is initial.
        select matnr maktx from makt into table itab2 for all entries in itab1 where matnr = itab1-matnr.
    if not itab2[] is initial.
       select matnr werks ekgrp from marc into table itab3 for all entries in itab2 where matnr = itab2-matnr.
    if not itab3[] is initial.
       select matnr werks mbwbest wbwbest from s032 into corresponding fields of table itab4 for all entries in itab3 where matnr = itab3-matnr.
    *if not itab4[] is initial.
       select atwrt from cawn into corresponding fields of table itab5.*
         endif.
       endif.
    endif.
    endif.
    end-of-selection.
      loop at itab3.
       itab_final-matnr = itab3-matnr.
       read table itab2 with key matnr = itab3-matnr.
       if sy-subrc = 0.
        itab_final-maktx = itab2-maktx.
       read table itab1 with key matnr = itab2-matnr.
       if sy-subrc = 0.
        itab_final-lgort = itab1-lgort.
        itab_final-werks = itab1-werks.
        itab_final-spmon = itab1-spmon.
        itab_final-magbb = itab1-magbb.
        itab_final-wagbb = itab1-wagbb.
        itab_final-azubb = itab1-azubb.
        itab_final-aagbb = itab1-aagbb.
      endif.
       endif.
       itab_final-ekgrp = itab3-ekgrp.
      read table itab4 with key matnr  = itab3-matnr.
      if sy-subrc = 0.
      itab_final-mbwbest = itab4-mbwbest.
      endif.
    itab_final-wbwbest = itab4-wbwbest.
      append itab_final.
      clear itab_final.
      endloop.
    WRITE: /2 'material', 23 'storagelocation',29  'plant',35 'date',44 'val.stock.issue',66 'val.stock.issue.value',86 'no.of.stock.receipts',97 'no.of.stock.issues',150 'material.des', 160 'pur.group',190 'stock.val',210 'stock.quan'.
      ULINE.
      loop at itab_final.
      WRITE: /2 itab_final-matnr, 23 itab_final-lgort,29  itab_final-werks,35 itab_final-spmon,44 itab_final-magbb,66 itab_final-wagbb,86 itab_final-azubb,97 itab_final-aagbb,
               150 itab_final-maktx, 160 itab_final-ekgrp,190 itab_final-wbwbest,210 itab_final-mbwbest,itab_final-atwrt.
    ENDLOOP.
    Thanks&regds,
    Sree.

    Hi sree,
    take join between s031-sptag ,ausp-datuvthen fetch records based on this condition.(itab1)
    After retrieve records based on join condition between
    ausp-atinn,ausp-adzhl and cawn-atinn,cawn-adzhl.(itab2)
    Retrieve records using for all entries bet first join condition and second join condition.
    use for all entries between itab1 and itab2.
    it will work surely.
    reaward points

  • Joining table in GRC 10 Process Control

    Hi,
    I am trying to create a new Data Source in GRC 10 Process Control. I need to join tables AGR_1251 (main table) and AGR_USERS. I am selecting AGR_1251 as main table. However, nothing comes up when I try to select AGR_USERS as 'Related Table'. On searching AGR_USERS , the system does not return any tables. Both are transparent tables and hence can be joined. I tried using both 'Reference Tables' as well as 'Dependent Tables' .
    Can you also explain the difference between 'Reference Tables' and 'Dependent Tables'.
    Regards,

    Hi Amarnath,
    tables is used to provide the table for the CURR(currency) or QUAN (quantity) fields.
    In your case you want to join tables via foreign key(s) and therefore will have to use dependant tables.
    The search for table AGR_USERS as dependant table for AGR_1251 will not return anything since the only table
    referred as check table (for a foreign key) in AGR_1251 is AGR_DEFINES.
    I would suggest to build your query based on defined check tables (see se11) of the needed tables (in this case AGR_DEFINE is the common point of both AGR_USERS & AGR_1251).
    Kind regards,
    Pascal

Maybe you are looking for

  • GL accounts- field status group table

    Hi guys, any idea whether there is a table that contains data about field status for the GL accounts similar to T082 for assets? Thanks and regards Stefan

  • Photo Album Hanging

    I have the new iPhone 5, it was set up as a new phone (I didn't want to carry all my crap over from my 4.) The photo album app seems to have a tendancy to hang. I open it and it loads as far as the column of albums, but doesn't show any pictures or a

  • Right Click Crashes MSOffice apps

    I just bought another Macbook Pro.  This time it is the 13" Retina.  Whenever I right-click on any MSOffice 2011 app (Outlook or Excel or Word) I get the beach ball and the program stops responding.  I have to force quite and re-open.  I'm wondering

  • How to reconstruct the missing parts list (co24)

    Dear All How to reconstruct the missing parts list (co24).by using report PPCOXPR1.? Rgds Pankaj Agarwal

  • Cannot update Itunes. Older version of Bonjour cannot be removed

    Trying to update Itunes, but dowload stops stating 'Older version of Bonjour cannot be removed'     ' Ask your Technical support group' I am computer stupid and do not understand any of this.    Is there a simple way to overcome this?