How to reconstruct the missing parts list (co24)
Dear All
How to reconstruct the missing parts list (co24).by using report PPCOXPR1.?
Rgds
Pankaj Agarwal
Hi Pankaj,
You need to run the program "PPCOXPR1" using SE38. This program will create missing part index in RESB table.
Hope this helps you, Reward your points.
Regards,
Prasobh
Similar Messages
-
Why the missing parts list changed after Pro.order released
I open a pro.order before released ,then I do the availability check get a missing parts list, this list including less parts than the missing parts after pro.order released ,why does it caused?which configuration caused?
Thanks,
HelaiHi Lai,
You can do Material Availability check at the two stage of Production / Process Orders.
- First is to control (Check Missing Part) at the time of Order Creation.
T.code is OPJK - Select order type and Business Transaction -1 at the time of Order Creation
- Second is to control(Check Missing Part) at the of Order Relase.
T.code is OPJK - Select order type and Business Transaction - 2 at the time of Order release.
So it may possible that you have assign different checking group or checks to the above both stages , that's why you got different result regarding missing parts during above both stages.
Regards,
Dhaval -
Co24 missing parts list does not show material with shortage
Dear All,
I have a following problem: a production order with status MSPR which has 2 components in the missing parts list from availability check (inside that PO).
In Co24 tcode system does not show any missing parts for the same production order.
For these missing parts i have shipping notifications with an exeption message 10: "bring process forward".
My question is why Co24 does not show missing parts while they are shown in the production order if click on ATP check button.
Is there any interconnection with expection messages to bring process forward?
Thanks for your help!
Regards, AndreyIt seems that at the stage when atp check was run last time there were no reciepts for missing parts. When i was doing ATP check in production order i didn't save results thus respective table was still containing old results.
After i saved results of ATP check in production order missing parts were dispayed in Co24 as expected. -
Hi All,
Till last week the missing parts list for a particular MRP controller showed many parts but since this week it only shows some parts and we are not able to find out the difference between what is expected and what it is showing.
Can somebdy guide me through the exact process how it searches for missing parts through Availability check.
Thanks
Shailesh.Dear Shailesh
Last week there might be No stock for componets, so system might have shown many componets list
but this week, enough stock might be availble for componets, so system is not showing missing parts
just check in MMBE for required components stock
Regards
kumar
Edited by: kumar kumar on Sep 9, 2009 12:26 PM -
Hi Team,
We are facing issue for availability check. During creation of Production order, the missing part list is not complete and it should show componenet A in the Missing part list. Below is the details:
Production Order quantity: 100 kg
Componenet A required quantity: 100 kg
MMBE Unrestricted qty: 1000 kg
MMBE Reserved Quantity: 2000 kg
So as per above figures component A should come as missing part during availability check. But it is not coming as missing part. Please check and give your inputs.Hello
The results of availability check should NEVER be compared with MMBE. As already mentioned, transaction CO09 is more appropriate.
Also, this issue has been already discussed on hundreds of threads in the past. See some examples below:
Problem with missing parts list during production order creation
issue in committing material for production order
Material Availibility check in Production orders
availability check
order is not released
As it is stated on the The SCN Rules of Engagement you should do some research before opening a thread. Therefore, please use the search tool or even google to search for similar problems before opening a thread.
BR
Caetano -
Missing Part list for Plant to Plant Purchase order
Hi,
I need the following requirement in CO24,
In CO24 its shows the missing parts for Sales order, similarly we want the missing parts list for Plant to Plant Purchase order in the same report. Also the report,
1.It should not consider the Planned order for a sales order.
2.It should not consider the planned order which can be convert into purchase requisition.
3.The procurement type should be "E" or "X".
Kindly guide me is there any standard layout changes in available or any development we have to do.
Thanks
Muthamil Murugan.GHi Purushothaman,
If you have the following settings in OPJK:
Plant XXXX
Order Type XXXX
Availability Check 2
[X]Status Check
[X]Check material availability when saving order (may not need)
Checking Rule PP PP checking rule
Component Check Type ATP check
Release material 2 Release permitted despite missing parts
Then in COHV you try to mass release the order with the following parameter:
List: Order Header
Selection: Your selection criteria
Mass processing:
Function: Release
Max. No.of Processes 99
Save Log: Always
Release control order: Collective Order Release
Then after the order is released, you can find the missing part list of that order in CO03 menu path:
Goto->Missing Parts->Missing parts list
Hope it helps.
Regards,
Rachel -
Hi,
We would like to send the missing parts list generated from CO24 to other system. Is there any standard IDOC available to send missing parts?
I would appreciate your help.
Thanks.Karthik,
Thanks for your quick reply. But this is not what I am looking out for. I am sorry, I think my question was not clear.
There is one functionality in Production Planning area that we can find out the missing parts for the production order. We have to send the information to our warehouse asking for the missing parts to fulfill the production order. Our warehouse is not on SAP so we want to send the information through an ALE/IDOC. In order to do this I wanted to know that is there any standard IDOC type which can be used or we have to create a custom IDOC.
Thanks. -
Hi Guru's,
When we checked the missing part list in the "COOISPI "report (Process Order infromation system) for the planned order and compared this with the missing parts in the MD12 for the particular planned Order, there was a differnece in number of entires (components) betwwne both these lists. why is the missing part list for MD12 and COOISPI is showing the difference?
If anyone is familiar with this report please let me know what can be the reason for the difference. also can any explain the logic how this report does the availability check for the missing parts.
Thanks,
Nagesh.Dear Nagesh,
1) For missing parts at plan order level check in MDVP ( Not in COOISPI )
2) Compare MDVP with MD12
3) AV check will carried out based on settings defined in OPJJ ( Combination of cheing group & checking rule )
Regards
Madhu Kumar -
Missing Part List !!
HI
Is there any std report to see the missing part list.
I mean material issued to prod order and we wana see the shortage.
Thank Youin co11n or co15--from menu --u can check for any missing parts against prod. order..
-
Missing parts list at planned order level
I have tried to use comac t-code for checking the missing parts list at planned order level. but no log has been generated. pls advise. Is there any way to do the same?
Hi,
Use MDVP, i think it should meet your need.
If helpful award points
Regards,
Vivek -
"missing part list" releasing process order, but the material there is
Hi dears,
Ive a strange problem.
When im going to release a process order, the system give me a missing part list.
The strange is the material indicated in that list, a component of a phantom, is present in state free in the st. location indicate.
Does anybody know what can be the problem?
Thanks in advance,
JuanHi all,
the problem was that the material was present in quantity lower than safety stock.
For this reason, the system give me that advice.
however thanks for the help.
Best regards,
Juan -
Missing Parts List History (CO24)
Hello,
is there a possibility within ERP 6.0 to see a history for missing parts in co-orders like in CO24.
I want to create a TopN report for the missing parts of the past. CO24 seems to be only relevant for the current parts that are missing.
Thanks in Andvance
MarkusHello Timothy
Transaction CO24 considers the settings defined on the scope of check (transaction OPJK), therefore, it may include another receipts instead of only checking the availability against the stock.
Please go to transaction CO24 and check exactly the elements that you want to consider on the ATP check (none if you want to check the availability against stock).
BR
Caetano -
Sales Order no in CO24 missing parts list
Missing parts CO24.
I am having trouble bringing the Sales Order field populated into the missing parts information system.
It seems that when RESB is populated with the sales order it brought through to the report but I have some Assembly Orders (82) that have a Sales Order but this is blank in the missing parts and therefore blank in RESB u2013 why would this be blank in RESB?
This is extremely frustrating as the users are asking me why have a Sales Order field that will not populate?
Could someone explain the logic of what conditions there are for the Sales Order number to appear in CO24 ?Hi,
In case of make-to-order scenario, the components are not managed on the sales order special stock, since the field special stock for the components is empty.
Therefore, the sales order number is not copied to the reservation and it is not available on CO24.
If you would like to have this field displayed in CO24, you should manage the components on the individual sales order stock, instead of using collective requirements.
I hope this helps.
Regards,
Marcelo -
I upgraded MacBook Pro (13-inch, Early 2011) to yosemite. I have no more access to Finder, App Store and some apps. Since I have no access to App Store I cannot download the missing parts. How can I get access to App Store?
Welcome to Apple Support Communities
What do you mean by having no access to those apps? Can you start up your Mac and work with it, and only some OS X apps do not work?
Anyway, what you can try is to reinstall OS X. To do this, hold Command and R keys while your Mac is starting up and reinstall OS X. You will not lose any file. -
Missing Parts List While creating Prd. Order
Hi Friends,
My client is creating production Orders Manually thru CO01and While Creating & Saving The Production Order System Is Not Supporting In Giving Missing Parts list In spite Of Deficit of Un Restricted stock inStorage Location For BOM components used in that Order.
To my surprise when the defisit is for all the BOM components only one component is showing as missing part in missing parts list.
But While confirming the order The system is showing missing parts for all the components which are defisit for order confirmation.
I Tried To Get This From the Following Method
Checked For Define checking control In OPJK.
Selected plant, Order type & selected the business function 1 for create or 2 for release. And Maintained These Settings
a) Removed tick mark in No Availability check.
b) Type of component check Given as - ATP check.
c) Material release - 1. User decides on release if parts are missing.
d) PP Checking rule (Which Is same As with plant parameter OPPQ)
e) In Define scope of check (OPJJ) made a tick mark in check w/o RLT.
Then Assigned the availability checking group at Mrp View of Header material.
In spite Of All These Settings Still At The Time Of Order Release/Save A Warning Massage Or A Informative Massage Is Not Appearing
*Please Suggestu2026u2026u2026u2026*
hariHi,
Please check same checking rule use in Material master and with order type and plant?
Check the cheking group in material master MRP3 view for all material.
Go to Transection OPJJ - Maintain scope of check,
Select your Checking rule which you have assing to your order type and tick INLCUDE RESERVATION.
(1). CO24- Missing Parts Information System
Under this transaction you choose Selection from Reservations and then select Plant & Material then you can get Missing Parts List for your respective material without production / planned order also.
(2). COOIS : Production Order Information System
Under this transaction you need to Select in List option as Components and then go on Selection Tab.
For collective availability check use
COHV - Excute the roport w ith collective avaliabilty check.
COMAC.
Hope this help.
Regards,
R.Brahmankar
Maybe you are looking for
-
Hi All, I had created a down payment Request using F-47 and paid using F110. After that i had adjsuted the down payment against vendor invoice(created using fb60) using the tcode -F-53. This had created a request but when i try to pay the remaining a
-
I've used to display a PDF file inside my JSP page. It is working fine in IE. However, many of users of this application are using Mozilla and the platform is Ubuntu so it is vital that the file is shown in Mozilla as well. How can I solve this probl
-
Magic idv gives me a server error
I have been trying to get help with a problem in Iphoto which I cant resolve and now it has occurred in Idvd. When I click on Magic Idvd I get the following error"The server May not exist or it is not operational at this time .Check server name Or IP
-
Accessing Work Items assigned to other users from end user page
Hello Experts, We are using Sun IDM 6.0 SP1 at our client place. Most of the applications integrated with IDM are manually provisioned, in the sense, once after all the necessary approvals are received the request will be assigned to a group of provi
-
Erros in Agent Inbox Profiles for Account Factsheet
Hello All, I need my service request and service orders to appear in the account fact sheet in the interaction center role For the missing customization I go to CRM-Interaction Center WebClient-Agent Inbox-Define Inbox Profiles where I have created a