Join two partitions

How to I join t wo partitions in sun solaris 9.0
because of lack of space I wanted to delete one partition and join that space to another one.
Please guide me on this..
Thank you,
PNRAJ

Hi!
In a similar situation i had, i used the solaris volume manager. I created a concatenated volume (raid 0, concatenation), in order to use the space by two different partitions. Of course, if one of the partitions becomes part of a failed component, you will lose all the data.

Similar Messages

How to join two partition

How can I join two partition on my macintosh from System Ultility

You'll have to be more specific.
IF you are talking about two partitions that were set up through Boot Camp Assistant and you want to remove windows and go back to one partition, then simply run Boot Camp Assistant again and choose the option to reunite the partitions.
IF you are talking about two Mac, HFS+ partitions, there is no easy way to do it. The only solution would be to make a backup (easiest by making an image in Disk Utility), and then repartitioning both drives as one, then restoring from the backup image.
Partitioning is usually a "final" process that cannot be reversed; boot camp is one exception.

What are prerequisites for joining two essbase cubes

Hi,
Please explain us the could we able to join essbase cubes. What is the approach in three layers of the rpd. We are struggling since long to join two essbase cubes.
Regards,
Chandra kanth

You can create a third cube and partition those two cubes. This will let you view both the cube from the third cube seamlessly.
Please look this up.
Oracle Essbase Database Administrator's Guide
-Biraj

Problem encountered when join two remote tables in a materialized view

I'm using oracle 9.2.0.6
1> I have two tables:
CREATE TABLE TEST
A VARCHAR2(100 BYTE),
C DATE
CREATE TABLE TEST1
A VARCHAR2(100 BYTE),
B TIMESTAMP
2>. I defined a prebuild table:
CREATE TABLE MV_TEST1
ID1 ROWID,
A VARCHAR2(100 BYTE),
ID2 ROWID,
B TIMESTAMP(6),
C DATE
3> I created mview logs:
CREATE MATERIALIZED VIEW LOG ON PSI_TEST.TEST
WITH ROWID
INCLUDING NEW VALUES;
CREATE MATERIALIZED VIEW LOG ON PSI_TEST.TEST1
WITH ROWID
INCLUDING NEW VALUES;
4> when I create mview:
CREATE MATERIALIZED VIEW PSI_TEST.MV_TEST1
ON PREBUILT TABLE WITH REDUCED PRECISION
REFRESH FAST ON DEMAND
WITH PRIMARY KEY
AS
select
test.rowid id1,
test.a,
test1.rowid id2,
test1.b,
cast(null as date) c
from test , test1
where test.a = test1.a(+);
It is created successfully.
5> problem:
when I use remote tables to do the same thing, say test and test1 are in another instance and are connected by a dbLink, I couldn't create the mview successfully:
CREATE MATERIALIZED VIEW PSI_TEST.MV_TEST1
ON PREBUILT TABLE WITH REDUCED PRECISION
REFRESH FAST ON DEMAND
WITH PRIMARY KEY
AS
select
a.rowid id1,
a.a,
b.rowid id2,
b.b,
cast(null as date) c
from test@dbl a, test1@dbl b
where a.a = b.a(+);
when run above statement, I got:
ORA-12015: cannot create a fast refresh materialized view from a complex query
Any ideas? Or joining two table through a dblink for a mview is not allowed at all?
Thanks in advance.

No one has a clue?
Message was edited by:
lzhwxy

Need help to join two tables using three joins, one of which is a (between) date range.

I am trying to develop a query in MS Access 2010 to join two tables using three joins, one of which is a (between) date range. The tables are contained in Access. The reason
the tables are contained in access because they are imported from different ODBC warehouses and the data is formatted for uniformity. I believe this cannot be developed using MS Visual Query Designer. I think writing a query in SQL would be suiting this project.
ABCPART links to XYZPART. ABCSERIAL links to XYZSERIAL. ABCDATE links to (between) XYZDATE1 and ZYZDATE2.
[ABCTABLE]
ABCORDER
ABCPART
ABCSERIAL
ABCDATE
[ZYXTABLE]
XYZORDER
XYZPART
XYZSERIAL
XYZDATE1
XYZDATE2

Thank you for the looking at the post. The actual table names are rather ambiguous. I renamed them so it would make more sense. I will explain more and give the actual names. What I do not have is the actual data in the table. That is something I don't have
on this computer. There are no "Null" fields in either of the tables.
This table has many orders (MSORDER) that need to match one order (GLORDER) in GLORDR. This is based on MSPART joined to GLPART, MSSERIAL joined to GLSERIAL, and MSOPNDATE joined if it falls between GLSTARTDATE and GLENDDATE.
[MSORDR]
MSORDER
MSPART
MSSERIAL
MSOPNDATE
11111111
4444444
55555
2/4/2015
22222222
6666666
11111
1/6/2015
33333333
6666666
11111
3/5/2015
This table has one order for every part number and every serial number.
[GLORDR]
GLORDER
GLPART
GLSERIAL
GLSTARTDATE
GLENDDATE
ABC11111
444444
55555
1/2/2015
4/4/2015
ABC22222
666666
11111
1/5/2015
4/10/2015
AAA11111
555555
22222
3/2/2015
4/10/2015
Post Query table
GLORDER
MSORDER
GLSTARTDATE
GLENDDATE
MSOPNDATE
ABC11111
11111111
1/2/2015
4/4/2015
2/4/2015
ABC22222
22222222
1/5/2015
4/10/2015
1/6/2015
ABC22222
33333333
1/5/2015
4/10/2015
3/5/2015
This is the SQL minus the between date join.
SELECT GLORDR.GLORDER, MSORDR.MSORDER, GLORDR.GLSTARTDATE, GLORDR.GLENDDATE, MSORDR.MSOPNDATE
FROM GLORDR INNER JOIN MSORDR ON (GLORDR.GLSERIAL = MSORDR.MSSERIAL) AND (GLORDR.GLPART = MSORDR.MSPART);

Can you join two DSO's?

We have tried joining two DSO's and are getting the warning that "more than one datasource has been used in this report". It appears that the DSO driver does not support joins. The report runs but it is VERY slow, the same sort of performance you get when you try to join data from two datasources that are actually different (like two different SQL Server databases or an Oracle table joined to a SQL Server table). It appears that this is not a supported function with the DSO driver. Any thoughts?

Yes, we have created the joins between the two DSOs. We are looking into using the Open SQL driver to go against the base tables to see if that will work. This is how the original ODS driver used to work.
Update: After changing the join type to a left outer join the performance improved signficantly. Although not ideal it looks like it will be fine for our requirements. This particular report will be run monthly and scheduled to run overnight.
Edited by: Mike Garrett on Oct 27, 2009 4:28 PM

Can you please help me by saying me how can i join two different picture to make it as one picture.??

Hi Sir/ Madam,
My name is Rishav and I am facing some problem with my Photoshop CC. Actually I have a question. If you guys could help me out i will be very obliged. The quest in "Can you please help me by saying me how can i join two different picture to make it as one picture.??"

Maybe you should post over at
Photoshop for Beginners
or start with the "Get Started" section of the Help:
Photoshop Help | Photoshop Help
And your question
Can you please help me by saying me how can i join two different picture to make it as one picture.??
does not seem particularly specific – do you want to simply combine two images as they are, do you want to clip elements from the one and insert them into the other, …?
Could you post (lores of) the images and explain what you intend to achieve?

Is there a way to share my Mail account and settings between two partitions, running Snow Leopard and Lion?

I have two partitions on my internal hard drive - one is running Mac OS X 10.6 Snow Leopard and the other is running Mac OS X 10.7 Lion. Mail (5.0) is set up and runs perfectly on the Lion partition and I have not used Mail (4.5) yet on my Snow Leopard partition. I want to know if I can read, download, and save mail into the same user Library folder (probably the Lion user library) from both partitions...

You usually set up your mail accounts on a specific e-mail client programs such as Mail in OS X and Mail on an iPad, which will access the same remote mail server to have your messages show up on each device. Mailboxes can be synced in this way between two devices.
An alternative is to use the same remote application such as Gmail to access that service from multiple devices, so a dedicated e-mail client like Mail is not needed, but the availability of these depends on the e-mail service being used.

Using a view to join two tables

Thank you in advance for any advice you can lend.
I am using this code in my MySQL db to create a view.
select
    job.id as job_id,
    umr_cost_calculation.plant_name,
    max(umr_cost_calculation.id) as max_id
from
    job,
    umr_cost_calculation
where
    job.id = umr_cost_calculation.job_id
group by job.id , umr_cost_calculation.plant_name
I did this so I can join two tables and pull in the most current cost data for a specific plant. The report will, at times, show the wrong (older) data. I can re-run the report, filter to just the one job and see again the wrong data. When I add the max_id to the report, it display the id and updates the report with the correct data. It appears that the view was stale and by adding the ID to the report this fixed the issue.
1) Is this the best way to make this join? I don't see how Crystal supports a subquery to make a join (this is why I used the view).
2) If I leave the max_id on the report, will this force the view to always update?

Try:
Select
D1.EmpLoginID,
Count(D1.ID),
Count(D1.AlarmCode),
D1.EmpName,
D1.EmpAddress,
D2.Db2Count
FROM DB1.Data D1
LEFT JOIN (SELECT
empLoginID, Count(*) as Db2Count
FROM DB2.ALL_Database
WHERE site = 'Atlanta'
GROUP BY empLoginID
) D2
ON D1.EmpLoginID = D2.EmpLoginID
GROUP BY D1.empLoginID, D1.EmpName, D2.EmpAddress, D2.Db2Count
Order BY D1.empLoginID ASC
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard.

Good Morning,
I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard. I shut it off took out the battery, reinstalled the battery. Then I put in the Snow Leopard CD and booted up to disk utility and The Snow Leopard partion would not show up?? I do see the microsoft partion.
I also rebooted holding down the shift key and still no Snow Leopard
Could you please tell me what I can do, what keys do I press on restart any advice to get Snow leopard back.
thank you.

Have you restarted holding down the Opt key? That procedure should give you a gray screen with all of the partitions that exist. Then select the SL partition for boot. Also go to System Preferences and Startup Disk, unlock the lock and select the SL partition as the default boot partition, then relock.

I have a 15" MacBook Pro with Mountain Lion installed. I have partitioned the hard drive into two partitions. Is it possible to install Snow Leopard on the second partition? If so how do I do it?

I have a 15" MacBook Pro with Mountain Lion installed. I have partitioned the hard drive into two partitions. Is it possible to install Snow Leopard on the second partition? If so how do I do it?

If your MacBook Pro had Snow Leopard on it at one time then sure. (Early 2011 or earlier)
How to erase and install Snow Leopard 10.6
Obviously choose the second partition to install into. It has to be OS X Extended journaled formatted in Disk Utility (BootCamp software makes it a MSDOS/FAT32 formatted partition if you used that to partition with)
If it's a Early 2011 or Late 2011 that came with 10.7, it's possible, but it's not easy.
https://discussions.apple.com/thread/3264421?start=0&tstart=0
If you can't install Snow Leopard, there is a thread over at MacRumors how to run Snow Leopard in a virtual machine program under 10.7 or 10.8

When in Windows 7 (using bootcamp obviously) I am able to see my files in my Mac partition. When I try to access them I am told that I need permission from the administrator. How do I give myself permission to access files between the two partitions?

When in Windows 7 (while using bootcamp) I am able to see my personal files in my Mac partition. When I try to access them I am denied access, it tells me that I need permission from the administrator. How do I give myself permission to access files between the two partitions, Mac/Windows7?

When in Windows 7 (while using bootcamp) I am able to see my personal files in my Mac partition. When I try to access them I am denied access, it tells me that I need permission from the administrator. How do I give myself permission to access files between the two partitions, Mac/Windows7?

DataType conflict in the R/3 when joining two tables

Hi Experts,
I have created a view with two table in the R/3 side by joining two common fields,but one of the field is getting error with different data type, so could any one suggest me how to resolve this issue without changing type.
Thanks,
Venugopal

Hi
Actually I have to pull one of the field from one table and place in other table and create a generic data source on it,Can any one suggest me with any solution or exists to solve this issue.
Thanks,
Venugopal

How Will Yosemite Logical Volume Group Affect Two-Partition Drive?

After installing Yosemite, my Macintosh HD became a Logical Volume Group. Now, in Disk Utility, both the Drive and the Volume have the same name — Macintosh HD. I want to use one of two partitions on an extra internal drive in my Mac Pro (Mid 2010) as a bootable clone of my Yosemite startup drive, using SuperDuper!. When cloning is complete, will my spare drive become a Logical Volume Group with a renamed drive? Will that effect the other partition, which is a bootable Mavericks clone?

Thanks for the tip. I see its a common trouble. But i stuck a problem that cannot be solved with this method cause i dont have revertable logic volume.
SO i cannot install system now. There's no visible disk any more.

How do you join two tables from different Oracle schemas using a subquery

I am trying to join two tables from different Oracle schemas using a subquery. I can extract data from each of the tables without a problem. However, when I combine the select statements using a subquery I get the Oracle error *'ORA-00936: missing expression'*. Since each SELECT statement executes on its own without error I don't understand what is missing. The result set I am trying to get is to match up the LINE_ID from PDTABLE_12_1 in schema DD_12809 with the MAT_DESCRIPTION from table PDTABLE_201 in schema RA_12809.
The query is as follows:
sql = "SELECT [DD_12809].[PDTABLE_12_1].LINE_ID FROM [DD_12809].[PDTABLE_12_1] JOIN " _
+ "(SELECT [RA_12809].[PDTABLE_201].MAT_DESCRIPTION " _
+ "FROM [RA_12809].[PDTABLE_201]) AS FAB " _
+ "ON [DD_12809].[PDTABLE_12_1].PIPING_MATER_CLASS = FAB.PIPING_MATER_CLASS"
The format of the query is copied from a SQL programming manual.
I also tried executing the query using a straight JOIN on the two tables but got the same results. Any insight would be helpful. Thanks!
Edited by: user11338343 on Oct 19, 2009 6:55 AM

I believe you are receiving the error because you are trying to JOIN on a column that doesn't exist. For example you are trying to join on FAB.PIPING_MATER_CLASS but that column does not exist in the subquery.
If you want to do a straight join without a subquery you could do the following
SELECT DD_12809.PDTABLE_12_1.LINE_ID
,       FAB.MAT_DESCRIPTION
FROM    DD_12809.PDTABLE_12_1
JOIN    RA_12809.PDTABLE_201    AS FAB ON DD_12809.PDTABLE_12_1.PIPING_MATER_CLASS = FAB.PIPING_MATER_CLASS HTH!

Join two partitions

Similar Messages

Maybe you are looking for