JoinFieldValue Product and Price

Hello, I am new to the whole JoinFieldValue expressions, however, this is what I am wanting to do but don't know how to accomplish:
In a Lead record, I have a picklist called "Product" and another text field called "Price". When a given Product is selected from the picklist, I would like the corresponding price for that product to update in the Price field in real time. The Product to Price relationship is a one-to-one relationship. I believe this can be accomplished with a JoinFieldValue expression.
An another version of Oracle CRM, I was taking care of the product and price in an Opportunity, and worked with a CRM support agent to create the following expression that worked similarly: JoinFieldValue('<Product>',[<ProductId>],'<cPurchase_Price_ITAG>')
I did not create this expression though, the support rep did, so unfortunately I don't know how to recreate something similar.
I'm a bit of a newbie at the JoinFieldValues, so may need some step-by-step instructions for it.
Thanks in advance for your help!

This syntax will work only if you have created the custom field with the name "Purchase_Price" and with type "currency". Replace the text <cPurchase_Price_ITAG> by the internal name of your new field, which you can find by pressing the "advanced" button in the "rename field" page of field setup.
regards,
Flavio Amorim
Brazil
www.triscal.com.br
Edited by: [email protected] on 08/01/2010 05:39
Edited by: [email protected] on 08/01/2010 05:39

Similar Messages

Java Card Product and Price List

Where to find the Java Card, Card Reader to read Java Card and its Price List issued by Sun Microsystems.I want these products and price list.
What is the tool needed to install the .CAP file in to Java Card?. I have read from the Sun Material, that there will be a off-card installer that loads the binary file of .CAP to Java Card through the CAD device. Where to find the off- card installer?
I had tested a sample application in Eclipse IDE with JCDK 2.2.2 and EclipseJCDE.
Please anyone provide me the details
Edited by: sachindev on Oct 24, 2007 6:22 PM

Hi there,
I found this site with everything that you might need, I would say that prices are reasonable (correct me if I am wrong):
Cards: http://www.smartcardsource.com/cards.htm
Readers: http://www.smartcardsource.com/readers1.htm
SDK: http://www.smartcardsource.com/sdk.htm
Hope it helps...

How can I install CS5 on a new/replacement laptop? I paid full price in 2011 and have the key (and it shows up in my Adobe account under products), but it was a downloaded product and I can't find a download of that version online and my key doesn't work

How can I install CS5 on a new/replacement laptop? I paid full price in 2011 and have the key (and it shows up in my Adobe account under products), but it was a downloaded product and I can't find a download of that version online and my key doesn't work in CC.

Your key cannot work in CC, it's newer version, and would require a new purchase.
Downlaod CS5 here.
Download CS5 products

Is it possible to have a price on a product and then have it automatically

populate the purchase price on the product revenue when the product is selected?

I have been able to use workflow to populate the purchase price on the opportunity product revenue based on the price stored in a field on the product component using: JoinFieldValue('<Product>',[<ProductId>],'<MSRP>')
I would like to set the default for the Purchase Price during the creation of a new record, but I am having no luck.
It seems that the purchase price has a 'default' of $0.00 since it is a currency field. If I add JoinFieldValue('<Product>',[<ProductId>],'<MSRP>') as a default on the field, it does not work. I'm thinking is has something to do with when you create an new record, you need to then select the product, so the ProductID is not established as time of initial record creation therefore the default will not work.
Any thoughts on this ??

My experience in Toshibas product and customer services

Just a warning to people who may be considering purchasing a Qosmio based on my own experiences and the research I have done in the last week.
Toshibas customer service is simply not what it once was and there are 100s of reports of Qosmios of all generations suffering extreme issues just outside of warranty periods.
Ref: Toshiba Qosmio X500-149, Support call reference ********
I am writing to express my frustration, anger and disappointment in Toshibas product and customer services.
I am a Freelance Community Manager, Video Game and hardware reviewer in the video games industry presently looking after 2 communities for 2 employers totalling over 2.5m users, I travel to a lot of trade shows, expos and community meet and greets where I require a laptop suitable of showing the employers products which are usually AAA video games or editing video on the fly for publication to social networking sites.
In January of 2011 my 4 year old Alienware hit that point where it really needed replaced, I opted for a Toshiba Qosmio over the Asus G73 as there was a 300 price difference for near identical spec.
I managed to source a X500-149 at PCWorld the companies flagship model here in the UK paying 1499 for it on January 26th 2011 reduced from 1799.
For the 1st 13 month this laptop performed admirably aside a design issue of the fan guards that I raised on the 16th May 2011 with PCWorld where the heat expelled causes the rear guard plastics to become exceptionally brittle and crack. I evangelised the product to anyone who asked me what laptop and model it was that was running these AAA games in such great detail, something I certainly won't be doing in future.
In early March 2012 it then began randomly locking up requiring a hard reboot this would then suffer issues restarting, reporting Operating system could not be found this would usually point to a fault on the primary HD, disk checking software however reported no errors but this continued to happen which would lead me to suspect the motherboard.
Within a month of this problem starting the left laptop fan began making a horrible screeching noise and had a distinct wobble whenever high RPM's were required and the machine began to often go into thermal shut-down whilst performing my work duties and utilising graphics and higher than idle CPU.
I decided on the 23rd April 2012 that enough was enough and I was going to speak to Toshiba as for this to happen to a flagship laptop that was only just out of warranty was simply unacceptable.
23rd April called to report the issue and was basically told tough luck its out of warranty at this point I also updated my tel numbers with Toshiba as the info was outdated, after expressing my anger at this Toshiba agreed to offer me a extended warranty at a cost of 166.
I was fuming to say the least Toshibas flagship laptop breaks at 14 month old and I am expected to stump up more money. If I was not desperate as the machine is critical to my work I would have returned the machine to PCWorld under the sales of goods act and it not being fit for purpose.
As that course of action would likely lead to legal proceedings, engineer reports and even more delay than just dealing with Toshiba for a repair, against my better judgement I called back at 11am on 24th April paid the 166 and took Toshiba up on the warranty extension, order number ********** again having to provide correct tel numbers as where once again incorrect, immediately after I reported the faults.
Toshiba Support centre on fault reporting where great noting each issue in detail and raised a collection with UPS for the following day.
The evening of the 24th April whilst I was retrieving data from the laptop in preparation for factory resetting it the machine went into thermal shut-down with a very distinct smell of burning chemical/plastic coming from the rear vents.
It took me over 90 minutes to get the machine cool enough to actually reboot and get my data after this I shut it back down and boxed it up not be used again.
I thought the best course of action would be to report this as it was a fair step up from the previous overheating. Wednesday 25th April at around 9am I called Toshiba to report this and was advised this would have to be dealt with by a head office case manager, as the item had become hazardous thus the collection that would take the laptop to the service centre was cancelled.
At this stage the advisor took my contact numbers again and escalated the case to head office advising at that time that I would be called by HO within 24 hrs.
Thursday 26th April 15:31 Well past the 24 hr mark and no sign of a call so I called support again and spoke to a advisor called Jacob. Jacob advise that HO had indeed tried calling on 01670 ******* this number was my old number, this number was the number I had advised twice already was incorrect and had provided both a correct land-line and mobile number 3 times previously. To say I was annoyed was a understatement.
Jacob attempted to contact Chloe Sontag who was looking after my case but the line just rang out so Jacob advised that he had sent an email asking for Chloe to contact myself.
Friday came and still no contact by 15:00 so I called support who once again tried to patch me to Chloe who's number once again just rang out and again an email was sent asking to call me.
No call by 17:30 so I called tech support again and spoke to Ian asking for head offices number so I could call them direct, Ian provided the number yet advised that HO are now closed.
After expressing my frustration with this whole process and just how critical this machine is to my daily working life Ian promised to look into the case on Monday AM and try and expedite actually getting a phone call to at least start the process of having this laptop repaired.
To say I'm annoyed is really a understatement not only has this failure to receive a simple phone call at least delayed the repair by almost a week but it is costing me more and money daily when I spent a large amount on what I imagined would be a great laptop for 3-4 years and believed Toshiba actually had good customer service in the event something did happen.
My best guess is that Chloe is on holiday or is part time or such like as her phone just rings out and if that is the case then I would question why assign a case to her, if she isn't then I would want to know why after 2 additional mails advising that the customer is not happy and to contact them has there been no contact or are your case workers just so overworked with faulty products that they can't manage the workload ??
So far Toshibas inability to produce a product that last as long as you expect it would has cost me 2 days off work that I am having to make up this weekend thus cancelling prior commitments, 166 extended warranty 600 for a HP laptop that I had to go and purchase yesterday 27th April 2012 to actually perform my work on and who knows how much in phone calls by the time this matter will finally be resolved.
I was happy with Toshiba as a manufacturer and of course laptops can have issues however having now researched these issues far to many Qosmio X500 users report severe overheating just after the 12 month period or within it and many state that repair after repair has taken place but still to no avail, this on top of the cracking of the rear heat-sink guards has to be a design fault.
This letter will not arrive with you before I have hopefully had a phone call and my laptop has at least been collected for repair, If I have not had that phone call then I would expect another letter very shortly.
Why have I wrote this letter ? To express my disappointment with just how poor the durability of your flagship laptop is and also at just how poor your customer service are, 1500 is a lot of money in the PC purchasing scheme of things and to expect this quality of hardware and customer service is simply unacceptable.
I expect the repair to be expedited and if like some of the horror storys I have read online parts required will take 4 weeks + then I would expect a replacement laptop, not everyone uses these things for entertainment and whilst the HP I had to rush out and buy with money I didn't really have available can allow me to perform my core duties to the minimum it cannot allow me to perform my duties to my standards, my employers standards or my expectant communities standards.
This has been a really unfortunate series of events as I had been considering the X870 Ivy Bridge based on the Nvidia 670m Qosmio which would release soon and passing this X500 onto my partner but after these events and the fact that the HP laptop had to come out of the money saved for it then I can categorically state that will not be the case and I will instead opt for the Asus G55 or G75.
If this issue cannot be resolved to a satisfactory manner then I will have no option but to seek an independent engineers report as well as printing the myriad of similar reports of these issues on the internet and return the item to PCWorld.
In line with the sale of goods act 1979 a large electrical item has to be of satisfactory quality and fit for purpose for a period of 6 years whilst I wouldn't expect the full 6 years from a laptop I would expect at least 3-4 year especially considering that this is a near 2000 flagship model not a 200 budget model.
This is a action I really do not want to take as it will likely end in small claims court against PCWorld a company that on this occasion has done nothing wrong, I do not believe in punishing those who are not at fault so its a action I really wouldn't be happy with and I'm sure PCWorld one of if not the largest vendor of Toshiba products when you incorporate the rest of the DSG group wouldn't be too pleased with it either.
Frustratingly

So I received my laptop back today after having fans replaced and a good clean as well as the top cover replaced.
Opened the box and took the laptop out 1st thing I noticed was a screw rattling around inside, SIGH!!!!
Plugged the laptop in and attempted to boot it at this point it just cycle through finalisation of windows install and shutdown.
How could a laptop have been tested if it didn't even have windows installed ?
An hour later and I gave up unplugged it and lo and behold it actually booted when on battery only.
I then noticed that the SSD was full, oh wait no it wasn't the head office engineer in his infinite wisdom decided that partitioning a 64GB SSD to 2 drives barely even leaving enough for Windows on the C: and wait for it putting the HDD recovery on the second partition was a good course of action.
So a completely borked install and a screw floating around inside remind me how this particular engineer has a job ??
I spent the next 15 minutes just moving data around and creating and deleting partiitions to fix this mess up.
Grabbed HWMonitor to check temps and at an idle 50c on CPU and 36c on GPU they didn't look too bad,
Installed the Toshiba recommended Nvidia driver a driver I hasten to add that was released in 2010 as Toshiba have not updated the drivers for their flagship series laptop since then, They are happy to take your 1643 that the unit cost but then don't expect support for it.
Anyway that aside I then installed 1 of the games I work on and began to run the machine through our benchmark software wooooosh the temps shot up to 90c+ on both CPU and GPU and remained at this temp for the duration of the benchmark never quite triggering thermal shutdown, I then loaded into a warzone for further testing and sure enough half way through it the machine shut down due to thermal shutdown.
I then uninstalled the toshiba driver and tried a NVidia one sure enough as others have advised actual Nvidia drivers seem worse and thermal shutdown came so much earlier.
I have been to PCWorld today to begin proceedings of returning outside of warranty due to not being fit for purpose or of suitable quality. This is costing me a further 60 and at least 2 weeks more without a proper machine and will likely result in me getting about 1300 back from PCWorld.
So lets do the math on just what this will have cost me by the time its finished.
1634 Original purchase
166 Extended Warranty
600 Backup Laptop whilst this was away for a month
60 outside of warranty assessment
50 phone calls
I will probably receive 1300 back but then 1300 doenst buy me the spec I need for work so I will have to pull out another 300-400 for the required spec so lets add that to the original figures.
A Toshiba Qosmio, Toshibas flagship laptop will have cost me in total 2910 almost double its actual retail price.
I will NEVER buy a Toshiba product again and it will become my lifes mission to let everyone know just how terrible they are.

Autorization of Sales District and Price List Creation to the User

Dear Experts,
At Present the end user (customer) is sending the request of New Sales District and Price List Creation to SAP SD Consultant and the consultant creates the same in Development Client SPRO through T code OVR0 etc. and then transports the same to Quality and Production Server. This Process takes a lot of time
We want to provide the direct access of Sales district and Price List creation to the user in PRD.
Kindly Let me know what is the best way in which we can handle this situation.
Regards,
Ranjan Singh

Are you sure you want to do that? You will create inconsistencies between the systems which will jepardise future tests. I suggest you just train end-user to do the procedure him/her self. I don't think it costs so much time to transport a couple of requests.

I want to buy a photo book but iphoto paying procedure is in swiss French and prices in francs

Same as the title. In addition, i've been to Geneva some months ago but it should update my location.And prices of course.

set the print products country in the iPhoto preferences and your location and languange preference in system preferences
LN

Price control V and price determination 3

In the material master record 'price control is given as V and price determination indicator as 3 . With this combination , in the sale order pricing, which price would be picked up by VPRS condition ? Material ledger is activated for this material .
Regards
Mahesh .

hi,
For Make to order scenerio, the price of finished goods will be Standard price ' s'. for Raw material it will be Moving average price"v".
For VPRS condition it will take Standard price of product.
if ur using with Quantity structure, then the price of Raw material in BOM and routing will be shown in ck11n.
Better to take EK02 Condition in pricing procedure with maitaining Requirement class and type.
It will automatically show the price of finished product when u click on cost calculation tab in sales order.
Regards,
Sreekanth Munipally

Increase decimal places in the PO quantity and Price

Hi All,
Can the decimal places in the PO( ME21N) creation be increased more than 3 decimal places in quantity and price?
I did changes in UOM's in CUNI, I increased the decimal places upto 14 but still it does not take more than three i-e., 0.001 maximum.
Is there any other way to handle this?
Request inputs on this.
Note 569326 - ME9F: Customized decimal places are not taken into account........ found this OSS but this correction instruction is not for our pack level ECC 6.0
Best regards,
Sridhar

hi
In case if you are already working in production remember that decimal places should not change. It will affect all previous data.
For your problem best solution is make order unit as 1000. So that your problem will solve
e.g. instead of 2.009 inr for 1 Unit use 2009 inr for 1000 unit.

Landed costs and price differences

I'm trying to figure out what PS does to adjust for total value discrepancies between an invoice voucher and associated PO. Say on my PO I have a line item with quantity of 2 and unit price of $10. Therefore total value is $20. When I create a voucher, that same line item is now 2x$11 = $22. I approve that voucher for $22. Now I run the Extract Landed Cost batch process. What does this process do to "compensate" for the difference between voucher and PO? Does it change the unit price of that item in inventory from $10 to $11?

Hi, yes you are right: Using this approach ML would use price differences for other batches and increase their value instead of posting them as loss like the initial cost.
The way around that would be to post some unplanned material good receipt for the loss production order, e.g. a material called scrap. In account determination you might make sure that these materials have own stock and price difference accounts that you could treat special in your balance sheet.
This would be shown in ML like a joint production between the planned product and the scrap material and multi-level variances would be distributed using following an apportionment structure from material master.
If it is difficult to maintain a reasonable apportionment structure you might implement BADI cost_split described in note 997264.
Also a good possibility would be to use a quantity-proportional split that can be derived from the ML quantity structure.
I could provide an example implementation of that.
best regards, Udo

Material and Price export to an External System

I've a Problem, I will send Materials with sales Price from SAP to an external System. I will use the IDOC MATMAS01, but I can't send the price with it? Is that correct? How I can send the sales Price for each Material? Is it possible to send more than one Material (mass export) with MATMAS01 per process? Or I had to define a Product or Price Catalog?
Or is there a better way by using a BAPI for this use case? Which BAPI?
Thanks

Thanks for the answers, now I've two ways to implement that, first with IDOC MATMAS01 and Idoc COND_A with an enhancement VKOE0001 PRICING CONDITION. And the second one with the BAPI.
Which is the better way?
And how I create a BAPI for Material and Sales Price?
Thanks

By Products and Co Products

Hello all,
What is the meaning of by-products and co-products??
Pls ans.
Thanks and Regards,
Umakanth.

dear
A co-product is a product that is produced in conjunction with other products. The system creates a separate order item in the production order for each co-product. As a result, it is possible to display actual costs at co-product level.
Prerequisites for a co-product:
The indicator Co-product must be activated in the material master of the co-product (MRP area)
The co-product must be listed as an item in the bill of material of the main product
On the Basic data tab page of the BOM item, the indicator Co-product must be activated in the field group General data.
A by-product is a product that is produced in conjunction with other products. The system does not create a separate order item for each by-product. The material valuation of a by-product is always based on the price specified by price control in the material master.
Prerequisites for a by-product:
The by-product must be listed as an item in the bill of material of the main product
The bill of material item must have a negative quantity (for example u20181 -u2019).
Do not set the indictor Co-product for by-products
Reward points if helpful
Thanks and regards
Ravikant Dewangan

Determine Discount and Price details for Materials in CRM

Hi,
I am looking for a standard program / function module which can provide information on Discounts and Prices for any given Material and Customer in SAP-CRM 7.0.
Any help on this will be highly appreciated.
Regards,
Prasanna

Hi ,
You can find the price and the discount for a product in the table CNCCRMPRSAP172 .
Regards,
Mithun

Co product and By product product costing and settlement

Dear Friends,
Here is my question
In Disrete manufacturing Product costing
when we design product costing Business blue print
Instead of using co-product we wrongly map to co-product what will be the impact in costing point of view
can any one explain demerits in costing point of view
Product costing is based on Quanity structure
if my question is not clear, please do not hesitate to ask for more information
Thanks & Regards
Raj

Hi,
Please consider the following:
1. By-Product Scenario:
You need to maintain a costing BOM, to determine the standard price of the by-product. In the BOM of main product, you can use this by-product as a credit, the system will calculate the target cost based on the std cost from coting BOM.
If you dont maintain the byproduct in BOM of main product, and while confirming you are entering by-product, then the system will calculate production variance.
2. Co-Product Scenario:
You need to maintain Co-product tick in either MRP2 or Costing View and maintain the coproduct combination in the Joint Production. This is to be maintained for all the co-products. Once you are entering a production order, the system automatically uses this combination and brings in multiple lines in the production order for all the relevant materials (co-products).
When cost estimate is done, the system divides the cost for materials, activity costs, etc based on the weightage maintained in equivalent numbers.
Trust this helps.
Please assign pts, if useful.

Difference between co-product and By-product

Hi,
Can anyone tell me Difference between co-product and By-product with example?
What is their impact on costing?

Hi,
By-Product : By-Product is a Product Created While Making Production
1. The System Does not create a separate order item for each by-Product
2. The Material Valuation of a by-Product is always based on the price, specified by the price control in the material master
3. The by-product must be listed as an item in the bill of material of the main product .The bill of material item must have a negative quantity (for example 1 -)
4. Byproduct has only the -ve quantity in BOM component, it does not go for joint production costing.
5. Movement type 531 to post the By-Product during Confirmation.
6. Settlement of cost is done to the header of the material
Co-Product :A co-product is a product that is produced in conjunction with other products. The system creates a separate order item in the production order for each co-product. As a result, it is possible to display actual costs at co-product
Settings: 1.) You have to activate check box in MRP2 view for co product.
2.) For co products we also need to define the apportionate structure with equivalence number for costing purpose, this will be done in "Joint Production" details in the same view. (30:30:20:20)
Prerequisite for the main product:
1.) The indicator Co-product must be activated in the material master of the main product (MRP area)
Prerequisites for a co-product:
1.) The indicator Co-product must be activated in the material master of the co-product (MRP area)
The co-product must be listed as an item in the bill of material of the main product
2.) On the Basic data tab page of the BOM item, the indicator Co-product must be activated in the field group General data
Regards
Sunil Kumar

JoinFieldValue Product and Price

Similar Messages

Maybe you are looking for