Joining Two Tables based on Conditions.

Hi All,
i would like to join two tables emp and dept with conditional join like
for example: select emp.column1...............
left outer join DEPT ON if Dept.column1='A" then emp.column1=dept.column1
else emp.column2=dept.column3
i know that bu using the UNION we can dothis, but i donot want to USE UNION.
please let me know if any workaround for this.
Thanks,
Kalyan

SQL> select * from etl
2 /
     EMPNO ENAME      JOB              MGR        SAL       COMM     DEPTNO AAA                     DEPT_NO
      7566 JONES      MANAGER         7839       2975                    20 2                         20
      7654 MARTIN     SALESMAN        7698       1250       1400         30 3                         10
      7698 BLAKE      MANAGER         7839       2850                    30 3                         10
      7782 CLARK      MANAGER         7839       2450                    10 1                         20
      7788 SCOTT      ANALYST         7566       3000                    20 2                         20
      7839 KING       PRESIDENT                  5000                    10 1                         20
      7844 TURNER     SALESMAN        7698       1500                    30 3                         10
      7876 ADAMS      CLERK           7788       1100                    20 2                         20
      7900 JAMES      CLERK           7698        950                    30 3                         10
      7902 FORD       ANALYST         7566       3000                    20 2                         20
      7934 MILLER5    CLERK           7782       1300                    10 1                         20
      7936 MILLER7    CLERK           7782       1300                    10 1                         20
12 rows selected.
SQL> select * from dept;
    DEPTNO DNAME          LOC
        10 ACCOUNTING     NEW YORK
        20 RESEARCH       DALLAS
        30 SALES          CHICAGO
        40 OPERATIONS     BOSTON
SQL> ed
Wrote file afiedt.buf
1 select
2     e.empno,
3     e.ename,
4     e.deptno,
5     aaa,
6     e.dept_no,
7     d.deptno,
8     d.dname
9 from
10     etl e ,
11     dept d
12 where
13     (e.aaa =1 and e.deptno = d.deptno) or
14*    (e.aaa =2 and e.dept_no =d.deptno)
SQL> /
     EMPNO ENAME          DEPTNO AAA                     DEPT_NO     DEPTNO DNAME
      7566 JONES              20 2                            20         20 RESEARCH
      7788 SCOTT              20 2                            20         20 RESEARCH
      7876 ADAMS              20 2                            20         20 RESEARCH
      7902 FORD               20 2                            20         20 RESEARCH
      7782 CLARK              10 1                            20         10 ACCOUNTING
      7839 KING               10 1                            20         10 ACCOUNTING
      7934 MILLER5            10 1                            20         10 ACCOUNTING
      7936 MILLER7            10 1                            20         10 ACCOUNTING
8 rows selected.Regards
Singh

Similar Messages

Join Two tables based on TO_DATE,TRIM,UPPER Functions in RPD

Hi All,
I have a requirement where I have to join 2 tables based on the functions TO_DATE,TRIM,UPPER.
I have Date Of Birth, Person Name . So I have to use these functions and then join in the RPD.
Is it possible to achieve. I am stuck in this problem.
Regards,
Krishna

Hi Dann,
Thanks for your reply. I had tried adding these functions but I get the error 'Only columns,designated predicates and operators are allowed". Niether in the Business not in the Physical layer we are allowed
to enter any functions in the join conditions between the two tables.
I am not very sure whether this is the normal behaviour or I can avoid this by doing something.
Thanks,
Krishna

Extracting from table based on conditions from two internal tables

Hi,
     i to have select few records from a table based on conditions from two different internal tables. How can I achieve this.?
ex:
      select objid from HRVPAD25 into table t_pad25
                                                where PLVAR = 01
                                                            OTYPE = E
                                                            OBJID = itab1-sobid
                                                            sobid = itab2-pernr.
How can this be written? can i use "for all entries..." addition with 2 tables?

Hi Maansi_SAP,
you can use exactly one internal table in the FOR ALL ENTRIES clause. Consider this alternative:
data:
itab_sobid_hash like itab1 with unique key sobid,
ls_pad25 like line of t_pad25.
sort itab1.
delete adjacend duplicates from itab1 comparing sobid.
itab_sobid_hash = itab1.
select objid
into ls_pad25
from HRVPAD25
for all entries in itab2
where PLVAR = '01'
    and OTYPE = E
    and sobid = itab2-pernr..
read table itab_sobid_hash with table key sobid = ls_pad25-objid.
check sy-subrc = 0.
append ls_pad25 to t_pad25.
endselect.
You may decide if itab1 or itab2 is better used as hashed table. Make a performance test.
The critics will tell you that SELECT ... ENDSELECT is not performant. That was very true, back in last milleniums's 90ies
Regards,
Clemens

Need help to join two tables using three joins, one of which is a (between) date range.

I am trying to develop a query in MS Access 2010 to join two tables using three joins, one of which is a (between) date range. The tables are contained in Access. The reason
the tables are contained in access because they are imported from different ODBC warehouses and the data is formatted for uniformity. I believe this cannot be developed using MS Visual Query Designer. I think writing a query in SQL would be suiting this project.
ABCPART links to XYZPART. ABCSERIAL links to XYZSERIAL. ABCDATE links to (between) XYZDATE1 and ZYZDATE2.
[ABCTABLE]
ABCORDER
ABCPART
ABCSERIAL
ABCDATE
[ZYXTABLE]
XYZORDER
XYZPART
XYZSERIAL
XYZDATE1
XYZDATE2

Thank you for the looking at the post. The actual table names are rather ambiguous. I renamed them so it would make more sense. I will explain more and give the actual names. What I do not have is the actual data in the table. That is something I don't have
on this computer. There are no "Null" fields in either of the tables.
This table has many orders (MSORDER) that need to match one order (GLORDER) in GLORDR. This is based on MSPART joined to GLPART, MSSERIAL joined to GLSERIAL, and MSOPNDATE joined if it falls between GLSTARTDATE and GLENDDATE.
[MSORDR]
MSORDER
MSPART
MSSERIAL
MSOPNDATE
11111111
4444444
55555
2/4/2015
22222222
6666666
11111
1/6/2015
33333333
6666666
11111
3/5/2015
This table has one order for every part number and every serial number.
[GLORDR]
GLORDER
GLPART
GLSERIAL
GLSTARTDATE
GLENDDATE
ABC11111
444444
55555
1/2/2015
4/4/2015
ABC22222
666666
11111
1/5/2015
4/10/2015
AAA11111
555555
22222
3/2/2015
4/10/2015
Post Query table
GLORDER
MSORDER
GLSTARTDATE
GLENDDATE
MSOPNDATE
ABC11111
11111111
1/2/2015
4/4/2015
2/4/2015
ABC22222
22222222
1/5/2015
4/10/2015
1/6/2015
ABC22222
33333333
1/5/2015
4/10/2015
3/5/2015
This is the SQL minus the between date join.
SELECT GLORDR.GLORDER, MSORDR.MSORDER, GLORDR.GLSTARTDATE, GLORDR.GLENDDATE, MSORDR.MSOPNDATE
FROM GLORDR INNER JOIN MSORDR ON (GLORDR.GLSERIAL = MSORDR.MSSERIAL) AND (GLORDR.GLPART = MSORDR.MSPART);

How to prevent Oracle from using an index when joining two tables ...

How to prevent Oracle from using an index when joining two tables to get an inline view which is used in an update statement?
O.K. I think I have to explain what I mean:
When joining two tables which have many entries sometimes it es better not to use an index on the column used as join criteria.
I have two tables: table A and table B.
Table A has 4.000.000 entries and table B has 700.000 entries.
I have a join of both tables with a numeric column as join criteria.
There is an index on this column in table A.
So I instead of
where (A.col = B.col)I want to use
where (A.col+0 = B.col)in order to prevent Oracle from using the index.
When I use the join in a select statement it works.
But when I use the join as inline view in an update statement I get the error ORA-01779.
When I remove the "+0" the update statement works. (The column col is unique in table B).
Any ideas why this happens?
Thank you very much in advance for any help.
Regards Hartmut

I think you should post an properly formatted explain plan output using DBMS_XPLAN.DISPLAY including the "Predicate Information" section below the plan to provide more details regarding your query resp. update statement. Please use the \[code\] and \[code\] tags to enhance readability of the output provided:
In SQL*Plus:
SET LINESIZE 130
EXPLAIN PLAN FOR <your statement>;
SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY);Usually if you're using the CBO (cost based optimizer) and have reasonable statistics gathered on the database objects used the optimizer should be able to determine if it is better to use the existing index or not.
Things look different if you don't have statistics, you have outdated/wrong statistics or deliberately still use the RBO (rule based optimizer). In this case you would have to use other means to prevent the index usage, the most obvious would be the already mentioned NO_INDEX or FULL hint.
But I strongly recommend to check in first place why the optimizer apparently seems to choose an inappropriate index access path.
Regards,
Randolf
Oracle related stuff:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle:
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

Joining two tables in PL/SQL

Hi there,
I have two problems...first being:
We are trying to run a sub-query within a WHERE/AND clause. I am not sure on the correct syntax on how to run the sub-query as denoted in the code below. Secondly I am trying to join two tables with a common column name (ie: CIPIDI_NR). Considering I cant fix the first problem I cant test out the sub-query. So any help on either would be grateful. Cheers
Select *
from TBL_CIPIDI
     WHERE CIPIDI_NR like nvl ('in_case_number%', CIPIDI_NR)
AND CIPIDI_NAME like nvl ('in_case_name%', CIPIDI_NAME)
AND COST_CENTRE LIKE NVL ('in_cost_centre%', COST_CENTRE)
AND CIPIDI_DESCRIPTION like nvl ('in_description%', CIPIDI_DESCRIPTION)
AND CLAIMANT_NAME LIKE NVL ('in_claimant%', CLAIMANT_NAME)
AND REQUESTOR LIKE NVL ('in_requestor%', REQUESTOR)
AND PROJECT_MANAGER LIKE NVL ('in_project_manager%', PROJECT_MANAGER)
AND TEAM_LEADER LIKE NVL ('in_team_leader%', TEAM_LEADER)
     AND ********RUN THE QUERY BELOW************
SELECT C1.CIPIDI_NR, C2.CIPIDI_NR
from TBL_TEAM_MEMBERS C1, TBL_CIPIDI C2
     WHERE C1.CIPIDI_NR = C2.CIPIDI_NR
     AND TEAM_MEM_NAME LIKE NVL ('in_team_mem_name%', TEAM_MEM_NAME)
);

You really need to start providing create table and insert statements for tables and sample data for testing, the results that you want based on that data in order to clarify the problem, your Oracle version, and a copy and paste of an attempted run of your code, complete with any error messages received. The following is my best guess at what you might be looking for.
Select *
from   TBL_TEAM_MEMBERS C1, TBL_CIPIDI C2
WHERE C1.CIPIDI_NR = C2.CIPIDI_NR
AND    c1.CIPIDI_NR          like nvl (in_case_number     || '%', c1.CIPIDI_NR)
AND    c1.CIPIDI_NAME        like nvl (in_case_name       || '%', c1.CIPIDI_NAME)
AND    c1.COST_CENTRE        LIKE NVL (in_cost_centre     || '%', c1.COST_CENTRE)
AND    c1.CIPIDI_DESCRIPTION like nvl (in_description     || '%', c1.CIPIDI_DESCRIPTION)
AND    c1.CLAIMANT_NAME      LIKE NVL (in_claimant        || '%', c1.CLAIMANT_NAME)
AND    c1.REQUESTOR          LIKE NVL (in_requestor       || '%', c1.REQUESTOR)
AND    c1.PROJECT_MANAGER    LIKE NVL (in_project_manager || '%', c1.PROJECT_MANAGER)
AND    c1.TEAM_LEADER        LIKE NVL (in_team_leader     || '%', c1.TEAM_LEADER)
AND    TEAM_MEM_NAME         LIKE NVL (in_team_mem_name   || '%', TEAM_MEM_NAME);

Want to Join two tables with cursors

Can anyone tell me how to join two tables only by cursors.
Not with:
1.Joining condition
2.Procedure etc.
Only cursors with passing parameters.
Sowmya

This is my assignment. I want to get the matching records from both tables. I have pk, fk for both tables for deptno.Can I pass parameter for this.
dept table:
deptno deptname
10 sales
20 Erp
30 hr
40 marketing
emp table:
Empno deptno Name
1 10 lee
2 20 hans
3 10 peter
4 30 james
5 30 king
Output should be:
deptno empname empno deptname
10 lee 1 sales
10 peter 3 erp
30 james 4 hr
30 king 5 marketing

How to join two tables

hi
how to join two tables using inner join if the first table has two primary keys and second table has 3 primary keys

Would describe type of joins in ABAP, which might differ with other joins.
The join syntax represents a recursively nestable join expression. A join expression consists of a left-hand and a right- hand side, which are joined either by means of INNER JOIN or LEFT OUTER JOIN. Depending on the type of join, a join expression can be either an inner (INNER) or an outer (LEFT OUTER) join. Every join expression can be enclosed in round brackets. If a join expression is used, the SELECT command circumvents SAP buffering.
On the left-hand side, either a single database table, a view dbtab_left, or a join expression join can be specified. On the right-hand side, a single database table or a view dbtab_right as well as join conditions join_cond can be specified after ON. In this way, a maximum of 24 join expressions that join 25 database tables or views with each other can be specified after FROM.
AS can be used to specify an alternative table name tabalias for each of the specified database table names or for every view. A database table or a view can occur multiple times within a join expression and, in this case, have various alternative names.
The syntax of the join conditions join_cond is the same as that of the sql_cond conditions after the addition WHERE, with the following differences:
At least one comparison must be specified after ON.
Individual comparisons may be joined using AND only.
All comparisons must contain a column in the database table or the view dbtab_right on the right-hand side as an operand.
The following additions not be used: NOT, LIKE, IN.
No sub-queries may be used.
For outer joins, only equality comparisons (=, EQ) are possible.
If an outer join occurs after FROM, the join condition of every join expression must contain at least one comparison between columns on the left-hand and the right-hand side.
In outer joins, all comparisons that contain columns as operands in the database table or the view dbtab_right on the right-hand side must be specified in the corresponding join condition. In the WHERE condition of the same SELECT command, these columns are not allowed as operands.
Resulting set for inner join
The inner join joins the columns of every selected line on the left- hand side with the columns of all lines on the right-hand side that jointly fulfil the join_cond condition. A line in the resulting set is created for every such line on the right-hand side. The content of the column on the left-hand side may be duplicated in this case. If none of the lines on the right-hand side fulfils the join_cond condition, no line is created in the resulting set.
Resulting set for outer join
The outer join basically creates the same resulting set as the inner join, with the difference that at least one line is created in the resulting set for every selected line on the left-hand side, even if no line on the right-hand side fulfils the join_cond condition. The columns on the right-hand side that do not fulfil the join_cond condition are filled with null values.
Note
If the same column name occurs in several database tables in a join expression, they have to be identified in all remaining additions of the SELECT statement by using the column selector ~.
Example
Join the columns carrname, connid, fldate of the database tables scarr, spfli and sflight by means of two inner joins. A list is created of the flights from p_cityfr to p_cityto. Alternative names are used for every table.
PARAMETERS: p_cityfr TYPE spfli-cityfrom,
p_cityto TYPE spfli-cityto.
DATA: BEGIN OF wa,
fldate TYPE sflight-fldate,
carrname TYPE scarr-carrname,
connid TYPE spfli-connid,
END OF wa.
DATA itab LIKE SORTED TABLE OF wa
WITH UNIQUE KEY fldate carrname connid.
SELECT ccarrname pconnid f~fldate
INTO CORRESPONDING FIELDS OF TABLE itab
FROM ( ( scarr AS c
INNER JOIN spfli AS p ON pcarrid = ccarrid
AND p~cityfrom = p_cityfr
AND p~cityto = p_cityto )
INNER JOIN sflight AS f ON fcarrid = pcarrid
AND fconnid = pconnid ).
LOOP AT itab INTO wa.
WRITE: / wa-fldate, wa-carrname, wa-connid.
ENDLOOP.
Example
Join the columns carrid, carrname and connid of the database tables scarr and spfli using an outer join. The column connid is set to the null value for all flights that do not fly from p_cityfr. This null value is then converted to the appropriate initial value when it is transferred to the assigned data object. The LOOP returns all airlines that do not fly from p_cityfr.
PARAMETERS p_cityfr TYPE spfli-cityfrom.
DATA: BEGIN OF wa,
carrid TYPE scarr-carrid,
carrname TYPE scarr-carrname,
connid TYPE spfli-connid,
END OF wa,
itab LIKE SORTED TABLE OF wa
WITH NON-UNIQUE KEY carrid.
SELECT scarrid scarrname p~connid
INTO CORRESPONDING FIELDS OF TABLE itab
FROM scarr AS s
LEFT OUTER JOIN spfli AS p ON scarrid = pcarrid
AND p~cityfrom = p_cityfr.
LOOP AT itab INTO wa.
IF wa-connid = '0000'.
WRITE: / wa-carrid, wa-carrname.
ENDIF.
ENDLOOP.

While joining two tables

Hi all,
Assume that someone needs to join two tables called PA0002 and PA0008 with keyword PERNR and
that person needs to read the data of PA0008 aedtm's max.
That is there are many records based on the aedtm and the user wants to read the last date update and wants to use this in join, not separately.
Any idea?
Thanks.
deniz

hi use this..
report.
tables:pa0002,pa0008.
data: begin of itab occurs 0,
      pernr like pa0002-pernr,
      vorna like pa0002-vorna,
      nachn like pa0002-nachn,
      begda like pa0002-begda,
      endda like pa0002-endda,
      end of itab.
data: begin of itab1 occurs 0,
      pernr like pa0008-pernr,
      begda like pa0008-begda,
      stvor like pa0008-stvor,
      ansal like pa0008-ansal,
      end of itab1.
data:begin of final occurs 0,
      pernr like pa0002-pernr,
      vorna like pa0002-vorna,
      nachn like pa0002-nachn,
      begda like pa0008-begda,
      stvor like pa0008-stvor,
      ansal like pa0008-ansal,
    end of final.
select-options:s_pernr for pa0002-pernr.
start-of-selection.
select pernr
       vorna
       nachn
       begda
       endda
       from pa0002
       into table itab
       where pernr in s_pernr.
sort itab by pernr begda descending.
select pernr
       begda
       stvor
       ansal
       from pa0008
       into table itab1
       for all entries in itab
       where pernr = itab-pernr.
sort itab1 by pernr begda descending.
loop at itab.
final-pernr = itab-pernr.
final-vorna = itab-vorna.
final-nachn = itab-nachn.
read table itab1 with key pernr = itab-pernr.
final-begda = itab1-begda.
final-stvor = itab1-stvor.
final-ansal = itab1-ansal.
append final.
clear final.
endloop.
   loop at final.
   write:final-pernr ,
final-vorna ,
final-nachn ,
final-begda ,
final-stvor ,
final-ansal .
   endloop.
regards,
venkat.

Joining Two Tables by Database View

HI There,
I'm trying to join two tables BNKA and LFBK to get the Bank details according to the requirement.
Now, I wanted to go head and create a Generic datasource and bring the fields from these two tables by Vew.
Can someone please explain me step by step to create the database view?
One more thing, do we need to have anything in common between two tables BNKA and LFBK ?
I really appreciate if someone can guide me through step by step method to create Database Table view?
Thanks
Madhuri

Hi Madhuri,
With out having common fields, we can not create data base view based on two tables.
1) goto SE11
2) select data base view and give the name and create.
3) in left side give the tables names
4) In left side define the relation
check the below article
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10a89c00-7dd7-2d10-6f83-cd24ee6d517c?QuickLink=index&overridelayout=true
Regards,
Venkatesh

Using a view to join two tables

Thank you in advance for any advice you can lend.
I am using this code in my MySQL db to create a view.
select
    job.id as job_id,
    umr_cost_calculation.plant_name,
    max(umr_cost_calculation.id) as max_id
from
    job,
    umr_cost_calculation
where
    job.id = umr_cost_calculation.job_id
group by job.id , umr_cost_calculation.plant_name
I did this so I can join two tables and pull in the most current cost data for a specific plant. The report will, at times, show the wrong (older) data. I can re-run the report, filter to just the one job and see again the wrong data. When I add the max_id to the report, it display the id and updates the report with the correct data. It appears that the view was stale and by adding the ID to the report this fixed the issue.
1) Is this the best way to make this join? I don't see how Crystal supports a subquery to make a join (this is why I used the view).
2) If I leave the max_id on the report, will this force the view to always update?

Try:
Select
D1.EmpLoginID,
Count(D1.ID),
Count(D1.AlarmCode),
D1.EmpName,
D1.EmpAddress,
D2.Db2Count
FROM DB1.Data D1
LEFT JOIN (SELECT
empLoginID, Count(*) as Db2Count
FROM DB2.ALL_Database
WHERE site = 'Atlanta'
GROUP BY empLoginID
) D2
ON D1.EmpLoginID = D2.EmpLoginID
GROUP BY D1.empLoginID, D1.EmpName, D2.EmpAddress, D2.Db2Count
Order BY D1.empLoginID ASC
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

Spliting a table in to two table based on the groups in SSRS

Hi,
I am trying to a split a rows accross two tables based on a group.
So far I have added a list and added a row group and grouped it using lineof business
Inside my list i have two identical tables so i can display the data
for the first table i have set the row visibility as follows: where LineOfbusiness1 is the groupname of my list group
=RowNumber(Nothing) >= (IIf(CountRows("LineOfBusiness1")\2 = 1, CountRows("LineOfBusiness1")/2, (CountRows("LineOfBusiness1")/2)+1))
and for the second table in the i have set the row visibility as follows
=RowNumber(Nothing)< (IIf(CountRows("LineOfBusiness1")\2 = 1,CountRows("LineOfBusiness1")/2, (CountRows("LineOfBusiness1")/2)+1))
this set up works fine for the first group but it doesnt display the data the way i want for the subsequent groups.
so how do i have the table start over after each group... plus in my group i have specified to do a page break after everygroup...
Any help will be appreciated.
Thanks
Karen

Visakh,
Thanks for answering.... a sample for the data will look like
dataset----
create table #dataset
Code varchar(5),
Name varchar(200),
Lineofbusiness int,
Statename varchar(10),
typed int,
description varchar(2000)
insert into #dataset
select 45111,abc,1,AL,4500,policies
insert into #dataset
select 45111,abc,1,AL,2500,vehiles
insert into #dataset
select 45111,abc,1,AL,3,drivers
insert into #dataset
select 45000,bca,2,AL,4500,policies
insert into #dataset
select 45000,bca,2,AL,500,house
insert into #dataset
select 45000,bca,2,AL,40,theft
When i display the data i want it to be
Line of business 1
policies 4500 drviers 3
vehiles 2500
Line of business 2
Policies 4500 theft 40
House 500
but right now the for lineofbusiness 1 its showing the correct way for but the line 2 everything is being displayed in the right.
Thanks
Karen

How do you join two tables from different Oracle schemas using a subquery

I am trying to join two tables from different Oracle schemas using a subquery. I can extract data from each of the tables without a problem. However, when I combine the select statements using a subquery I get the Oracle error *'ORA-00936: missing expression'*. Since each SELECT statement executes on its own without error I don't understand what is missing. The result set I am trying to get is to match up the LINE_ID from PDTABLE_12_1 in schema DD_12809 with the MAT_DESCRIPTION from table PDTABLE_201 in schema RA_12809.
The query is as follows:
sql = "SELECT [DD_12809].[PDTABLE_12_1].LINE_ID FROM [DD_12809].[PDTABLE_12_1] JOIN " _
+ "(SELECT [RA_12809].[PDTABLE_201].MAT_DESCRIPTION " _
+ "FROM [RA_12809].[PDTABLE_201]) AS FAB " _
+ "ON [DD_12809].[PDTABLE_12_1].PIPING_MATER_CLASS = FAB.PIPING_MATER_CLASS"
The format of the query is copied from a SQL programming manual.
I also tried executing the query using a straight JOIN on the two tables but got the same results. Any insight would be helpful. Thanks!
Edited by: user11338343 on Oct 19, 2009 6:55 AM

I believe you are receiving the error because you are trying to JOIN on a column that doesn't exist. For example you are trying to join on FAB.PIPING_MATER_CLASS but that column does not exist in the subquery.
If you want to do a straight join without a subquery you could do the following
SELECT DD_12809.PDTABLE_12_1.LINE_ID
,       FAB.MAT_DESCRIPTION
FROM    DD_12809.PDTABLE_12_1
JOIN    RA_12809.PDTABLE_201    AS FAB ON DD_12809.PDTABLE_12_1.PIPING_MATER_CLASS = FAB.PIPING_MATER_CLASS HTH!

How do I join two tables in the same database and load the result into a destination table in a SSIS package

Hi,
I have a query that joins two tables in the same database, the result needs to be loaded in a destination DB table. How do I do this in SSIS package?
thank you !
Thank You Warmest Fanny Pied

Please take a look at these links related to your query.
http://stackoverflow.com/questions/5145637/querying-data-by-joining-two-tables-in-two-database-on-different-servers
http://stackoverflow.com/questions/7037228/joining-two-tables-together-in-one-database

Joining two tables, sql query

This is a newbie question! I would like to join two tables. Table_1 contains xml stylesheets:
id stylesheet doc
1 <xml stylesheet doc A>
2 <xml stylesheet doc B>
And Table_2 contains the XML documents that the stylesheets will transform:
id XML doc
1 <XML document 1>
1 <XML document 2>
1 <XML document 3>
2 <XML document 4>
2 <XML document 5>
I would like <xml stylesheet doc A> to transform only XML doc that have an id of 1, so I tried this sql statement:
select a.stylesheet_doc ,b.xml_doc from Table_1 a, Table_2 b where a.id=b.id and a.id=1;
This statement returns the rows I want (stylesheet doc with id equals 1, and xml_doc with id equals 1), but it pairs each xml document with a style sheet.
stylesheet doc A <XML document 1>
stylesheet doc A <XML document 2>
stylesheet doc A <XML document 3>
My question is, is there a way to have a result that looks like this?
stylesheet doc A
<XML document 1>
<XML document 2>
<XML document 3>
That is, is there a way in sql to get rid of duplicate stylesheet doc A?
I have tried group by and rollup and xmlagg.
Thank you very, very much for your help.
Jim

Hi, Jim,
Welcome to the forum!
You just want to display the XML, not actually transform it, right?
GROUP BY ROLLUP should work, but I find it easier with GROUP BY GROUPING SETS. Here's an example from tables in the scott schema:
SELECT       CASE
          WHEN GROUPING (ename) = 1
          THEN d.dname
       END          AS dname
,       e.ename
FROM       scott.dept     d
JOIN       scott.emp     e ON     d.deptno     = e.deptno
GROUP BY GROUPING SETS ( (d.dname, e.ename)
               , (d.dname)
ORDER BY d.dname
,       ename          NULLS FIRST
;Output:
DNAME          ENAME
ACCOUNTING
               CLARK
               KING
               MILLER
RESEARCH
               ADAMS
               FORD
               JONES
               SCOTT
               SMITH
SALES
               ALLEN
               BLAKE
               JAMES
               MARTIN
               TURNER
               WARDYou may have noticed that this site noramlly compresses whitespace.
Whenever you post formatted text (such as query results) on this site, type these 6 characters:
\(small letters only, inside curly brackets) before and after each section of formatted text, to preserve spacing.

Joining Two Tables based on Conditions.

Similar Messages

Maybe you are looking for