Jolt for weblogic (5.1) and encryption ?

Hi.
I'm trying to use encryption between Jolt for Weblogic clients and Jolt servers
(JSL/JSH), but I can't get it work.
The JSL's "-Z" option is set to 40, and it boots without errors. Tuxedo 6.5 Security
add-on is installed. Everything works fine without the "-Z" option.
However, the Jolt client, while connecting to JSL, always catches a SessionException
with the following message:
Reason:NwHdlr: open: J_DH Bad Reply\nbea.jolt.JoltException: NwHdlr: open: J_DH
Bad Reply
and nothing is logged on the server side...
Is there something to configure or install on client (i.e. weblogic) side ? Has
anyone already succeeded in using Jolt's encryption ?
Any help welcome...
PS: I have posted this question on several groups, as far as it seems that nobody
knows about Jolt's encryption...

Hi Mathieu,
You may need to install a Tuxedo rolling patch. You need at least:
Tuxedo 6.4 Rolling Patch level 210,
Tuxedo 6.5 rolling patch level 47,
see the following CR:
CR016914 (Jolt only) DiffieHellman Key exchange for Jolt
Also, you may need to have WLS SP 10 installed in order to use
40-bit encryption. See CR 45413 with additional information in the Service
Pack release notes.
CR 45413: Added an international version of Jolt client which is required to talk
with International Tuxedo.
Scott Lynch
Michael Young <[email protected]> wrote:
Hi.
Try posting this to one or both of the following newsgroups:
weblogic.developer.interest.general or tuxedo.general. If you get no
response then I
suggest you open a case with BEA support.
Thanks,
Michael
Mathieu Chauvin wrote:
Hi.
I'm trying to use encryption between Jolt for Weblogic clients andJolt servers
(JSL/JSH), but I can't get it work.
The JSL's "-Z" option is set to 40, and it boots without errors. Tuxedo6.5 Security
add-on is installed. Everything works fine without the "-Z" option.
However, the Jolt client, while connecting to JSL, always catches aSessionException
with the following message:
Reason:NwHdlr: open: J_DH Bad Reply\nbea.jolt.JoltException: NwHdlr:open: J_DH
Bad Reply
and nothing is logged on the server side...
Is there something to configure or install on client (i.e. weblogic)side ? Has
anyone already succeeded in using Jolt's encryption ?
Any help welcome...
PS: I have posted this question on several groups, as far as it seemsthat nobody
knows about Jolt's encryption...--
Developer Relations Engineer
BEA Support

Similar Messages

Jolt for weblogic encryption initialization failure

Hi.
I'm trying to use encryption between Jolt for Weblogic clients and Jolt servers
(JSL/JSH), but I can't get it work.
The JSL's "-Z" option is set to 40, and it boots without errors. Tuxedo 6.5 Security
add-on is installed. Everything works fine without the "-Z" option.
However, the Jolt client always catches a SessionException, with the following
message: Reason:NwHdlr: open: J_DH Bad Reply\nbea.jolt.JoltException: NwHdlr:
open: J_DH Bad Reply
and nothing is logged on the server side...
Is there something to configure or install on client (i.e. weblogic) side ?
Has anyone already succeeded in using Jolt's encryption ?
Any help welcome...

Hi Mathieu,
You may need to install a Tuxedo rolling patch. You need at least:
Tuxedo 6.4 Rolling Patch level 210,
Tuxedo 6.5 rolling patch level 47,
see the following CR:
CR016914 (Jolt only) DiffieHellman Key exchange for Jolt
Also, you may need to have WLS SP 10 installed in order to use
40-bit encryption. See CR 45413 with additional information in the Service
Pack release notes.
CR 45413: Added an international version of Jolt client which is required to talk
with International Tuxedo.
Scott Lynch
Michael Young <[email protected]> wrote:
Hi.
Try posting this to one or both of the following newsgroups:
weblogic.developer.interest.general or tuxedo.general. If you get no
response then I
suggest you open a case with BEA support.
Thanks,
Michael
Mathieu Chauvin wrote:
Hi.
I'm trying to use encryption between Jolt for Weblogic clients andJolt servers
(JSL/JSH), but I can't get it work.
The JSL's "-Z" option is set to 40, and it boots without errors. Tuxedo6.5 Security
add-on is installed. Everything works fine without the "-Z" option.
However, the Jolt client, while connecting to JSL, always catches aSessionException
with the following message:
Reason:NwHdlr: open: J_DH Bad Reply\nbea.jolt.JoltException: NwHdlr:open: J_DH
Bad Reply
and nothing is logged on the server side...
Is there something to configure or install on client (i.e. weblogic)side ? Has
anyone already succeeded in using Jolt's encryption ?
Any help welcome...
PS: I have posted this question on several groups, as far as it seemsthat nobody
knows about Jolt's encryption...--
Developer Relations Engineer
BEA Support

Which database driver is required for weblogic 10.3 and Oracle DB 11g both on MS2008 separate server

Hi,
i am trying to configure JDBC with weblogic. Can any one tell me which deriver needs to be selected for weblogic 10.3 and Oracle DB 11g both on MS2008 separate server.
if i use BEA oracle Driver (Type 4) version 9.0.1, 9.2.0,10,11, i find error (see snap:2)
Connection test failed.
[BEA][Oracle JDBC Driver]Error establishing socket. Unknown host: hdyhtc137540d weblogic.jdbc.base.BaseExceptions.createException(Unknown Source) weblogic.jdbc.base.BaseExceptions.getException(Unknown Source) weblogic.jdbc.oracle.OracleImplConnection.makeConnectionHelper(Unknown Source) weblogic.jdbc.oracle.OracleImplConnection.makeConnection(Unknown Source) weblogic.jdbc.oracle.OracleImplConnection.connectAndAuthenticate(Unknown Source) weblogic.jdbc.oracle.OracleImplConnection.open(Unknown Source) weblogic.jdbc.base.BaseConnection.connect(Unknown Source) weblogic.jdbc.base.BaseConnection.setupImplConnection(Unknown Source) weblogic.jdbc.base.BaseConnection.open(Unknown Source) weblogic.jdbc.base.BaseDriver.connect(Unknown Source) com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:505) c om.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConn ectionConfiguration(CreateJDBCDataSource.java:369) sun.reflect.GeneratedMethodAccessor 826.invoke(Unknown Source) sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl. java:25) java.lang.reflect.Method.invoke(Method.java:597) org.apache.beehive.netui .pageflow.FlowController.invokeActionMethod(FlowController.java:870) org.apache.beehiv e.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809) org.ap ache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478) or g.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java :306) org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336 ) ...
and
when i use oracle's driver (thin) version 9.0.1, 9.2.0,10,11, i find error
Connection test failed.
Io exception: The Network Adapter could not establish the connection oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:10 1) oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112) oracle .jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173) oracle.jdbc.drive r.DatabaseError.throwSqlException(DatabaseError.java:229) oracle.jdbc.driver.DatabaseE rror.throwSqlException(DatabaseError.java:458) oracle.jdbc.driver.T4CConnection.logon( T4CConnection.java:411) oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnectio n.java:490) oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:202) oracle .jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:33) oracle.jdbc. driver.OracleDriver.connect(OracleDriver.java:474) com.bea.console.utils.jdbc.JDBCUtil s.testConnection(JDBCUtils.java:505) com.bea.console.actions.jdbc.datasources.createjd bcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:36 9) sun.reflect.GeneratedMethodAccessor826.invoke(Unknown Source) sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl. java:25) java.lang.reflect.Method.invoke(Method.java:597) org.apache.beehive.netui .pageflow.FlowController.invokeActionMethod(FlowController.java:870) org.apache.beehiv e.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809) org.ap ache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478) or g.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java :306) org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336 ) ...

i am finding this error when i click on Test Configuration button to test the connection wth oracle DB

Install fails for Weblogic 5.1 and VisualAge 3.5 integration kit

I am having some trouble installing the integration kit.
In the BEA kit install guide page 5, step 2., It says " delete javax.rmi and javax.transaction".

hai , i am mailing regarding the memory refrence error shown by Dr watson in nt when you were running the wl server5.0posted by you in the bea site. in novemberi face the same error when i run wl 6.0 console . If you have a solution to the problem please reply back regarding the samebyethomas

Where can I find document for weblogic(process JSP and Servlet)

Hello Maksim,
The link in your message no longer worked. I got "page can't be displayed".
Thank you.

Unable to start admin server service for weblogic (startWebLogic.sh) Linux

I installed ECM 11g on Linux 64-bit , installed weblogic 12
so when I try to start admin server service for weblogic (startWebLogic.sh) and following error its showing
I found solution to give full access permeation for the user , but it's still same issue
and i am triyng to start services from the users how installed the Weblogic and ECM
bash-4.1$ '/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/startWebLogic.sh' .
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/home/ecm/Oracle/Middleware/patch_wls1211/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/ecm/Oracle/Middleware/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/lib/jvm/jdk1.6.0_33/lib/tools.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/weblogic_sp.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/weblogic.jar:/home/ecm/Oracle/Middleware/modules/features/weblogic.server.modules_12.1.1.0.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/webservices.jar:/home/ecm/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/home/ecm/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/home/ecm/Oracle/Middleware/oracle_common/soa/modules/commons-cli-1.1.jar:/home/ecm/Oracle/Middleware/oracle_common/soa/modules/oracle.soa.mgmt_11.1.1/soa-infra-mgmt.jar:/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/common/derby/lib/derbyclient.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/xqrl.jar:/home/ecm/Oracle/Middleware/Oracle_ECM1/ucm/idc/jlib/idcloader.jar:/home/ecm/Oracle/Middleware/Oracle_ECM1/ucm/idc/components/NativeOsUtils/classes-NativeOsUtils.jar
PATH=/home/ecm/Oracle/Middleware/wlserver_12.1/server/bin:/home/ecm/Oracle/Middleware/modules/org.apache.ant_1.7.1/bin:/usr/lib/jvm/jdk1.6.0_33/jre/bin:/usr/lib/jvm/jdk1.6.0_33/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/ecm/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.6.0_33"
Java(TM) SE Runtime Environment (build 1.6.0_33-b04)
Java HotSpot(TM) 64-Bit Server VM (build 20.8-b03, mixed mode)
Starting WLS with line:
/usr/lib/jvm/jdk1.6.0_33/bin/java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=AdminServer -Djava.security.policy=/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/weblogic.policy -Xverify:none -Djava.endorsed.dirs=/usr/lib/jvm/jdk1.6.0_33/jre/lib/endorsed:/home/ecm/Oracle/Middleware/wlserver_12.1/endorsed -da -Dplatform.home=/home/ecm/Oracle/Middleware/wlserver_12.1 -Dwls.home=/home/ecm/Oracle/Middleware/wlserver_12.1/server -Dweblogic.home=/home/ecm/Oracle/Middleware/wlserver_12.1/server -Dcommon.components.home=/home/ecm/Oracle/Middleware/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain -Djrockit.optfile=/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig/servers/AdminServer -Doracle.domain.config.dir=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig -Digf.arisidbeans.carmlloc=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig/carml -Digf.arisidstack.home=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dipm.oracle.home=/home/ecm/Oracle/Middleware/Oracle_ECM1 -Ducm.oracle.home=/home/ecm/Oracle/Middleware/Oracle_ECM1 -Dem.oracle.home=/home/ecm/Oracle/Middleware/oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/home/ecm/Oracle/Middleware/patch_wls1211/profiles/default/sysext_manifest_classpath:/home/ecm/Oracle/Middleware/patch_ocp371/profiles/default/sysext_manifest_classpath weblogic.Server
<Sep 12, 2012 12:08:02 PM EEST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Sep 12, 2012 12:08:03 PM EEST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Sep 12, 2012 12:08:03 PM EEST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.8-b03 from Sun Microsystems Inc..>
<Sep 12, 2012 12:08:04 PM EEST> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for 13340309 Thu Feb 16 18:30:21 IST 2012
WebLogic Server Temporary Patch for 13019800 Mon Jan 16 16:53:54 IST 2012
WebLogic Server Temporary Patch for BUG13391585 Thu Feb 02 10:18:36 IST 2012
WebLogic Server Temporary Patch for 13516712 Mon Jan 30 15:09:33 IST 2012
WebLogic Server Temporary Patch for BUG13641115 Tue Jan 31 11:19:13 IST 2012
WebLogic Server Temporary Patch for BUG13603813 Wed Feb 15 19:34:13 IST 2012
WebLogic Server Temporary Patch for 13424251 Mon Jan 30 14:32:34 IST 2012
WebLogic Server Temporary Patch for 13361720 Mon Jan 30 15:24:05 IST 2012
WebLogic Server Temporary Patch for BUG13421471 Wed Feb 01 11:24:18 IST 2012
WebLogic Server Temporary Patch for BUG13657792 Thu Feb 23 12:57:33 IST 2012
WebLogic Server 12.1.1.0 Wed Dec 7 08:40:57 PST 2011 1445491 >
<Sep 12, 2012 12:08:06 PM EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING.>
<Sep 12, 2012 12:08:06 PM EEST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool.>
<Sep 12, 2012 12:08:06 PM EEST> <Notice> <LoggingService> <BEA-320400> <The log file /home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/logs/AdminServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms, such as Windows.>
<Sep 12, 2012 12:08:06 PM EEST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to /home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/logs/AdminServer.log00009. Log messages will continue to be logged in /home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/logs/AdminServer.log.>
<Sep 12, 2012 12:08:06 PM EEST> <Notice> <Log Management> <BEA-170019> <The server log file /home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/logs/AdminServer.log is opened. All server side log events will be written to this file.>
Sep 12, 2012 12:08:09 PM oracle.security.jps.internal.keystore.file.FileKeyStoreManager openKeyStore
WARNING: Opening of file based keystore failed.
<Sep 12, 2012 12:08:09 PM EEST> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.>
<Sep 12, 2012 12:08:09 PM EEST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
 at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)
 at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)
 at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
 at weblogic.security.SecurityService.start(SecurityService.java:148)
 at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
 Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsRuntimeException: JPS-06514: Opening of file based keystore failed.
 at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:167)
 at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
 at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
 Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsException: JPS-06514: Opening of file based keystore failed.
 at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2855)
 at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3097)
 at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:164)
 at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
 Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06514: Opening of file based keystore failed.
 at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:374)
 at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:104)
 at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:76)
 at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:66)
 at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)
 Truncated. see log file for complete stacktrace
>
<Sep 12, 2012 12:08:09 PM EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED.>
<Sep 12, 2012 12:08:09 PM EEST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down.>
<Sep 12, 2012 12:08:09 PM EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN.>
bash-4.1$

Looks to be a cert or keystore issue. How do you have that setup?

Regarding New for weblogic portal

hi every one.
My name is krishnarjun yada. I am the new for weblogic portal applicatons and i have a training on next weak. But i don't know much more about on portal.I mean which topics are there and how to work. I have knowledge on WebspherePortalServer. Please guide me anyone it's very need for me.
Please reply to <email address removed by moderator> ASAP.

*** moderator note ***
I've removed your email address from the post because a) you are likely to get lots of spam in your email by publishing it in public and b) responses to issues should be posted on the forum, as this is not a personal support service where people should be contacting you directly.
Also please note that this is a forum of volunteers doing their own jobs, and leading their own lives, so to request help "ASAP" or "Urgently" etc. is not appropriate and considered very rude by many people. Such urgent issues suggest a live system that has got problems and a company is losing money or people's lives are at risk, in which case the issue should be raise via My Oracle Support (MOS) which is the paid-for support channel for Oracle.
The description of your issue, wanting to know more about a product before your training, is not an urgent issue. (Surely the point of the training is to learn it?)
*** end of moderator note ***

Do I need to set system env variables for weblogic and SOA server installation?

Hi All,
   I already have two weblogic application servers on my machine(that were installed by others).
I observed some environment variables were also set in System variables(ORACLE_HOME,WEB_SERVER_HOME etc) section in Env variables section(Start Menu---> Computer --> properties ---).But why do we need to have system environment variables wherein we already have those variables in files like setDomainEnv.bat or/and setSOADoaminEnv.bat for each server.
And one more thing system variables will be applicable for all servers(the whole machine) right.It may spoil the installation of new servers and present servers as variables should be unique to each server.
    I want to install weblogic and SOA server installation.
So Can I remove the existing system variables(as they will applicable for every server) and install weblogic and SOA server installation without setting up the environment variables?
Especially I have multiple Weblogic servers,In that case how it would be to have environment variables(JAVA_HOME,WL_HOME,ORACLE_HOME etc)?
Please guide me on this to installl SOA suite .
Thanks in advance

Hi All,
   I already have two weblogic application servers on my machine(that were installed by others).
I observed some environment variables were also set in System variables(ORACLE_HOME,WEB_SERVER_HOME etc) section in Env variables section(Start Menu---> Computer --> properties ---).But why do we need to have system environment variables wherein we already have those variables in files like setDomainEnv.bat or/and setSOADoaminEnv.bat for each server.
And one more thing system variables will be applicable for all servers(the whole machine) right.It may spoil the installation of new servers and present servers as variables should be unique to each server.
    I want to install weblogic and SOA server installation.
So Can I remove the existing system variables(as they will applicable for every server) and install weblogic and SOA server installation without setting up the environment variables?
Especially I have multiple Weblogic servers,In that case how it would be to have environment variables(JAVA_HOME,WL_HOME,ORACLE_HOME etc)?
Please guide me on this to installl SOA suite .
Thanks in advance

Strange username and password in Mozilla saved passwords for chrome://weave (Mozilla Services Encryption Passphrase)

What is chrome://weave (Mozilla Services Encryption Passphrase) ?
I checked my saved password list in Mozilla Firefox and I found two strange usernames for site: chrome://weave (Mozilla Services Encryption Passphrase) and chrome:weave (Mozilla Services Password). Is this username randomly generated or is it possible that some addin/application/malware automatically generates this username and password.
The username for both is "gjqsnhtjmmojlnmtepcdbiccdfrrerid"
Password for chrome:weave (Mozilla Services Password) is a password I use commonly so seems to be provided by me but the password for : chrome://weave (Mozilla Services Encryption Passphrase) is a combination of random letters(just like the username)
My issue is only that it should not be the work of any malicious content lying in my system which has reached my Mozilla Saved Passwords

chrome://weave (Mozilla Services Encryption Passphrase is the sync key that is used to locally encrypt your data before sending it to the Sync server. 
That key is automatically generated and changing the sync key will wipe all data stored on the sync server. 
It is good practice to have a backup copy of the sync key. 
The user name stored in the password manager is also generated, but you can always use the email address to get access to your sync account.

Single Client Access Name for Weblogic Forms and Reports.

I have a 2 node clustered system:
Windows 2008 R2 64-bit
Weblogic 10.3.3 (on each node)
Weblogic Forms and Reports 11.1.1.3 (on each node)
Database 11gR2 RAC 11.2.0.1 (on each node)
The forms and reports are clustered and I can connect to each from each of the two servers and the cluster is working well.
The database uses Single Client Access Name (SCAN) to present the database as if it were one server called dbserver1.
I was wondering if there was a similar thing for Weblogic and what everyone else uses to present their application as a single name to the user.
I tried using Windows Network Load Balancing, but this stops the database scan listeners from working.
Thanks.

Dear,
Did you find an answer to your question back in 2009?
We are facing the same installation architecture, but we do not find any concrete information regarding SCAN with Oracle Forms 11g
Geert

Workshop for weblogic and spring 2.0.6 not working on weblogic 92

Hi,
I try to use workshop for weblogic 10.1 to create a web project using spring mvc framework and deploy it to a weblogic 9.2 server, and it gives me the error.
Here's what I have done:
Create a 9.2 server.
Create a web project with spring facet, I downloaded spring 2.0.6.
I created a test jsp page along with applicationContext.xml and springServlet.xml spring support.
When I start the server and publish the ear to the server,
I got the following error:
Aug 28, 2007 9:18:03 AM EDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Aug 28, 2007 9:18:27 AM EDT> <Error> <HTTP> <BEA-101216> <Servlet: "SpringContextServlet" failed to preload on startup in Web application: "springmvcWar".
java.lang.NoClassDefFoundError: weblogic/i18n/logging/MessageLoggerRegistryListener
 at java.lang.ClassLoader.defineClass1(Native Method)
 at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
 at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
 at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:338)
 at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:291)
 Truncated. see log file for complete stacktrace
I couldn't find the class weblogic/i18n/logging/MessageLoggerRegistryListener anywhere.
Does anybody have seen this error before.
Thanks
maildt

Hi,
I tried the scenario against 9.2mp1 server and 9.2mp2 server and the publish worked fine.
The only difference is the jsp file you created
Can you remove your jsp file and see if the publish still fails?
Which version of 9.2 server are you using? Also, what all facets are you using other than spring?
Can you also try something and see if it helps?
1. Open a new workspace
2. In Window -> Preferences -> WebLogic -> J2EE Libraries, removed the logging bridge libraries (the 10.0 version) and re-added these libraries from a 9.2 installation.
Basically they are
wls-commonslogging-bridge 1.0/1.0
wls-commonslogging-bridge-war 1.0/1.0
wls-commonslogging-bridge 1.0/1.1
wls-commonslogging-bridge-war 1.0/1.1
and add 2 jars from 9.2_BEA_HOME/weblogic92\common\deployable-libraries
3. Create web project and follow the other steps
Thanks
Vimala

Weblogic.appc compiler for Weblogic 9 and higher version

We had problem precompiling the jsp's using weblogic.jspc compiler after migrating the project from 8.1 to 9.2. From the edocs weblogic documentation we see that jspc compiler is deprecated from weblogic 9 onwards and they recommend using weblogic.appc for precompiling the jsp's.
Please note if you are passing runtime expression values in the name attribute of the jsp param tag, you will have to explicitly enabke "<rtexprvalue-jsp-param-name>" to true in weblogic.xml deployment descriptor (format shown below).
<weblogic-web-app>
<jsp-descriptor>
<rtexprvalue-jsp-param-name>true</rtexprvalue-jsp-param-name>
</jsp-descriptor>
</weblogic-web-app>
Below is the edocs link which has JSP descriptors information for Weblogic 9,2
http://e-docs.bea.com/wls/docs92/webapp/weblogic_xml.html#wp1038491
- - Tarun

The solution given in the below link worked for me .
http://a-developer-life.blogspot.com/2010/11/injecting-into-ejb3-with-google-guice.html?showComment=1328674836129#c7251888680841418914

Enter username and password for "weblogic" at ..

We have a web service running on a single domain on a weblogic 7.0 SP1 cluster.
We load balance via a F5 in front of the cluster. Our F5 accepts SSL requests
on port XXX3, terminates SSL and forwards the non-SSL request to a managed server
in the cluster for processing. Likewise, the F5 receives HTTP requests on port
XXX0 and forwards the non-SSL request to a managed server in the cluster.
We have no Weblogic security features configured for the web service. Only the
standard "myrealm" is configured with the defaults values.
Whenever we call this web service, via the F5, on the XXXX ports, we are prompted
to authenticate. The message "Enter username and password for "weblogic" at <domain-name>"
appears. We don't even have a "weblogic" realm configured. (1) We are not sure
why we need to authenticate when no security has been configured for this application
(2) We've tried every username password combination we can think of and none work.
One clue is.... if we use the standard HTTP ports 80 and 443 for traffic coming
into the firewall, we are not prompted to authenticate. The web service works
just fine. The problem seems to rise when we use the non-standard ports on the
F5 of XXX0 and XXX3 and forward traffic from these ports to the managed servers.
Has anyone seen this behavior?
-Cassandra

In Firefox go to the tools menu - Add-ons - extensions then remove browse for change.

Powershell to classify files ( confidential, highly confidential, Business use, and Public ) and encrypt it for confidential & highly confidential types.

Hello Experts !!
I am wondering if PowerShell can be used to classify files ( confidential, highly confidential, Business use, and Public ) and encrypt it for confidential & highly confidential types.
I found some material for Windows Server 2008 R2 and Windows 8.1 but that doesn't seem convincing. I need it for Xp and Windows 7.
Thanks !

You may want to consider using FCI (File Classification Infrastructure) in Server 2012 R2. You will need FSRM (File Server Resource Manager), AD RMS (Active Directory Management Services), AD CS (Active Directory Certificate Services, and DAS (Dynamic Access
Control). You will also need a 2012 level forest and domain, and KDC support for claims, compound authentication, and Kerberos armoring.
Microsoft has already developed the software foundation to do exactly what you're looking for at an enterprise scale. It may be easier to implement it, instead of reinventing the wheel..
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable)

Looking for "PDF Public-Key Digital Signature and Encryption Specification"

Hi,
i am looking for the following ("old") document:
PDF Public-Key Digital Signature and Encryption Specification
Originally i could be found here:
http://partners.adobe.com/asn/developer/acrosdk/DOCS/ppk_pdfspec.pdf
But not anymore. Does somebody of you still have it? Adobe today just offers the latest documents but i specifically need that older version.
Or is there an archive i don't know of?
Thanks for your help,
ToM

You can read the PDF 1.5 specification OR even ISO 32000-1 itself for that information. Each feature is "tagged" with the specific version in which it was introduced.
Digital Signatures were first introduced in Acrobat 4 (PDF 1.3) and have seen various improvements which each version since.

Jolt for weblogic (5.1) and encryption ?

Similar Messages

Maybe you are looking for