JPEG Export Settings for third party printing.

Hi all,
I'm exporting JPEGS from a recent shoot and I am uploading to photobox.co.uk for printing. My question relates to the JPEG quality slider. I notice that 10 seems to be the default for original size. What export quality does everyone use for print export of JPEG? I've tried 11 and 12. 11 seems to be a very small size compared to my usual photoshop workflow and I'm worried that I am over compressing and will get poor prints. I have also ran 12, but these files seem very large indeed for upload. If I must, I'll use 12, but would like peoples opinion as to if the difference between 11 and 12 is really noticeable.
Thanks
Steve

You should be able to tell by looking at them. If you can't see a difference, then 10 is good enough
Really, I'm not trying to be cheeky. Look at the export files, compare them on fine edges, and see if 10 is sufficient, especially considering your print size. Maybe order 2 prints; one from each size export, at your target size, and see if you can tell any difference. Use it as a learning experience.

Similar Messages

Settings for third party order

Hi,
what are the settings needed for setting up third party order particularly at the schedule line level. Thanks in advance.
Regards
sri krishna

Dear sri krishna,
1) the first thing would be to have the item category group at the material level as BANS which is for a third party material.
2) Assign the item categories so that we have TAS as the item category or for a normal item have TAS as the manual item category and change it at the order level.
3) At the schdule line level, select the required order type for purchase order which is generally NB.
4) Select item category which says third party
5) Select the relevant account assignment category for third party out of the selection.
6) In the item category if you want an automatic purchase order then switch the automatic PO indicator.
Hope the explanation helps you.
Thanks & Regards
Sadhu Kishore

Soft Proof for Third Party Printing?

Julieanne's great training video covers Soft Proofing for monitors and local printers. How about using it for exports to third party Printers? All my work is exported to my Zenfolio sponsored website. From there is purchased for print by further exporting it to MPIX who in turn ship it directly to the buyer. How can I use Soft Proofing to optimize those photos. With LR3 my highly random and guesstimate solution was to add +5 with the brightness slider. I don't know why but its seemed to work even though the images were overly bright on my iMac monitor.

In terms of Blurb, unless you know for a fact that they use only one profile, then the soft proof debate is moot. And I seriously doubt they have one profile for all their papers (that is basically impossible).
This is correct. Blurb uses different printers/presses for different run sizes. You really cannot predict which one they will use and soft proofing to their one profile is really not useful. In fact I have tested this before and had two identical books printed with them, one using their (indeed cmyk) profile and one leaving all the images in sRGB. The sRGB one came out much closer to the original and the cmyk one came out too dark. In fact the cmyk one looked like what happens when I apply generic US web coated to images in their profile, so if you want to print with blurb, you're better off completely ignoring their profile and sending everything in sRGB as Lightroom appears to do. Of course you could have guessed this as they only offer a single profile, while they offer quite a few different papers as well as use multiple printers/presses.

The best export settings for 6x4 & 5x7 prints...

Hi guys,
I am using iphoto '08 and was hoping that someone can assist me with what export settings to use for 6x4 and 5x7 prints. I have 800 odd pics that I want to upload to an online printing company who happen to have a special on at the moment. If I export all the pics at full resolution i get over 1GB of data that I can't upload to the site. So my question is what setting should I use to reduce the file size so that I get a decent print and file size.
Most of the pics are currently JPEG and 3456 × 2304 in size giving a file size of 3.1-3.3MB. When exporting should I leave the JPEG Quality at maximum and change the file size?
Thanks,
Adrian

What quality print do you want?
THe more pixels the better - in theory
most people want a minimum of 300 dpi so you need to multiple the print size in inches by 300 to get the DPI - 4x6 == 1200x1800 - and crop to 4x6 first so the photo processor does not crop for you
5x7 == 1500x2100 (and again you are better off to do the 5x7 crop)
150 DPI is generally a very acceptable print - so for 150 DPI cut the above number in 1/2
And use maximum quality JPEG for the best quality - a lower quality for a smaller size
LN

EDI Basic configuration settings for Third party sales

Dear All,
Could you help step by step how to configure EDI to send PO automatically to outsourcing company for the Third party sales order.
Thanks
CG Balaji

Hi roberto
Please send me basic EDI configuration document to my mail id [email protected] this will help me a lot.
Thanks and regards,
CG Balaji

Embedding ICC profiles for third party printing?

Hi,
This is a question regarding Elelments 11 and embedding ICC profiles. I have succesfully set up a colour balanced system for printing on my own premises. At the time of printing I select the relevant ICC profile for the printer/ink combo I am using. However I need to send files way for larger sizes and want to ensure colour correct prints that match as closely as possible the prints I produce in my own studio.
How do I embed the third parties provided ICC profile in the file before sending to them?
Any help on the correct process would be appreciated,
thanks
Andy Martin

Not sure the following answers your question, but have a look here:
http://www.drycreekphoto.com/tools/profile_converter/

Order related billing for third party. Third party order..

Hi
While we are running batch job for billing system is throwing below error.
Order related billing for third party. Third party order..

Dear Nortel,
Can you Please check whether, during the item category configuration for TAS (T. Code: VOV7); you have marked relevant for billing indicator as F?
Also, maintained the copy control (T. Code: VTFA) between OR => IVA (for TAS) as follows:
Copying requirement = '013',
Invoiced quantity = 'F', (*)
Quantity/value = '+',
Pricing type = 'G'.
Best Regards,
Amit
Note: I would recommend you to Please go-through following document in full, atleast fo once. This will definitely help you to review your settings for Third Party Order Process Customization.
[Third Party Process|http://yasosap.wordpress.com/2008/10/22/third-party-scenario/]

Third Party Printing Software recommendations for Oracle R12 AP Check printing

We currently use Formscape for check printing in Oracle 11i. upgrade to R12 , Oracle AP checks are PDF and we are looking for alternatives for third party tools.
Any recommendations are appreciated.

Review this note, you will get source of check printing program
R12: Master Troubleshooting Guide for Oracle Payables Check Printing issues (Doc ID 1353280.1)
thanks

PO document type for third party PO...?

Hello friends,
My client's requirement is that third party PO should have different document type, say ZTRD?
I tried to configure the same with PR and PO doc types. I created new PO type ZTRD. I maintained the combination of PR doc type NB with item cat S to PO doc type ZTRD with item cat S. I also deleted the standard config i.e. combination PR doc type NB with item cat S to PO doc type NB with item cat S.
I created third party SO which created third party PR (doc type NB). But when I tried to convert this PR into PO, still with above config, I am getting error - Doc. type/item cat. NB/S (requisition) <-> NB/S (purch. order) error.
Please help me to configure the Z doc type for third party PO.
Thanks in Advance,
Pat.

Hi
Please try the following, do not delete the standard settings
1) Create Z document type for PR and assign this document type to relevant Schedule line Category ( CS for example) in SD
2) Create Z document type for PO and keep only Item category S & Z document type for the Item category S created for PR.
Hope it helps.
Thanks/Karthik

Process demand for third party direct shipment

Hello ,
I need help in below given areas. in our rollout client is given statement of work like this.
1)     Demand transfer to vendors
2)     Reminder processing
3)     Process demand for third party direct shipment
Please can you explain me about these area, how it works with example. it is very benificial for us.
Regards
sapman

Hi Sapera,
There can be 3 typse of trading scenarios
1. 3rd party with Shipping notification : Where in u create sales order and create PO against the PR which si triggered in SAles order adn hen MIGO followed by MIRO and Billing. Here Billing to the end customer can be doen before MIRO because the billign quantity considered is based on the goods Receipt( MIGO) quantity. Many a times you might have your personnels or soem mechanisms to cross verify the delivered quanity as some times the vendor might not dispatch the quantiy in the PO. Here the MIGO doen si consumption posting/Non valuated GR as physically it doenot come into your stock and therefore is not shown in our stock. ITem category used in TAS
2. 3rd party without shiiping notfication ; Here MIGO is not done and billig ncan be done only after MIRO as the billing quantity is based on the Invocie receipt quantity in MIRO
3. Bought in items/ Dealer Sales : Here you bring in the materials from the vendor to our depot plant and then dispatch it to the customer . Here PR is geenrated from sales order followed by PO and MIGO. After MIGO you have to do PGI followed by Billing. MIRO doesnot have any impact on the PGI or Billing. Item category used is TAB
But in all the three instancesthe configurational changes happen in schedule line cateogry and the account assignment which is maintiend in item category and for automatic determination of 2 different schedule line categories we need to maintian 2 different item categories alothough item category settings are almost the same.
Hope this was helpful in giving you some insights on the trading processes
Regards,
Nithin

Custom Template for Third Party Balance Summary Report(Java type executable

Hi Al,l we have a requirment to have a layout with some of the fields from
Third Party Balance Summary Report( Which is a Java type executable and
Data definition has Data Template attached(.xml)).
I tried in below way.
Coppied the Third Party Balance Summary Report program with same application and parameters
with. Then defined a Datadefinition with my concurrent prog short name
attached the same standard .xml file(Not sure what it is) and developed a custom template with
a custom rtf(excel output type), and submitted the program
the output is generated in excel but my custom .rtf layout is not getting applied
rather it is showing same layout as in standard.
Some thing I am missing here or else it is not the way of changing the
template.
If any one know how to do this please let me know.
My client want only some files from the standard report(no need of new fileds)
with output type xls.
Thanks in Advance.
The same content is posted in Custom Template for Third Party Balance Summary Report(Java type executable sorry for duplicating the thread, just for increase the visibility for my issue I did this.

I gave up on using a different font or figuring out if I could use Times New Roman's built-in fractions visible in Font Book (as unicodes) and did a work-around based on Michael Wasley's tips in this discussion.
https://discussions.apple.com/message/11622842#11622842
I adapted it however and think it looks a little better.
Font: Times New Roman 12 point
I used the fraction bar in 12-point (Shift-Option-1) for automatic kerning.
For the numerator, I changed the font style to superior (12-point).
For the denominator, I changed the font style to subscript (Shift-Command-hyphen) and reduced the font size to half, or 6-point using the short-cut Shift-Command-<.
When the fractions occured in my footnotes (9-point), I used 4-point in the denominator; 10- and 11-point, I used 5-point in the denominator. This seemed to produce the best result when printing.
Thank you, Michael.
-Dottie

What are the best export settings for a HD video in Premier Pro CS4?

Hi!
   I've been having so much trouble with this issue and it's something that continually frustrates my boss. I have a HD video the settings for it are
FPS 23.98
1920 x 1080, then a few lines down it says 1408 x 792
16 bit,
2 channels
48000 Hz
   What should the settings be when I make a new sequence?
             When I look at it in the window in Premiere Pro I have to contantly 'shrink' the image to fit the window, is that something I should be doing or does it indicate the sequence settings are incorrect?
But more importantly what should the export settings be? I exported a 4 minute long video and the size was 1 GB, I know that's too big.
I need to export it without loosing any quality and export another one that meets the Youtube and Vimeo limits on size.
Vimeo is 500 MB per week, sometimes I upload 4 videos per week. I think Youtube you can only upload 500 MB at a time.
I need to get smaller sizes with loosing the least amount of quality possible AND the best export settings for quality, so I guess I have 3 separate questions-
What are the best sequence settings for HD video?
What are the best export settings for HD without loosing any quality?
What are the best export settings for the size to come out around 500 MB with loosing the least amount of quality possible?
Thank You!
http://forums.adobe.com/thread/713070
On the above thread I used the 5th anwer, and it's going to take about 7 hours to export a 4 minute video :/

It Stands for "Coder Decoder."
Your format is like a container for your video file. Certain containers can hold certain codecs and not others. Other containers can hold other codecs. Sometimes different containers can hold the same codecs.
This might be a bad analogy but I'll give it a try.
A coffe cup (container) can hold pretty much any liquid you drink, where a red solo cup (container) won't hold scolding water. So, the coffe cup would be your container of choice most likely because it has the most options for liquids (codecs). But, you might want a red solo cup for just a single crappy beer at a party (a moderate quality streaming video on the web). In that case, you don't need all the optoins of another container.
In Premiere Pro CC H.264 is a Container and the Codec in one option. This has been streamlined for web distrobution of video to be played in browsers without things like Flash or special players.
Were as if you choose the QuickTime Container there are over 40 codec optoins (at least on my machine with additinal ones installed) but you may run into an issue where your browser doesn't support QuickTime playback.
I would say that your container is for compatability with players and your codec is taken into consideration when looking at the quality of the compression.
Yesteraday I wrote a blog entery on Exporting from Premiere Pro and found that the MPEG-4 codec inside of the QuickTime container gave me much richer colors than the H.264 container/codec option.
I posted the link before but here it is:
http://goo.gl/8GZq4i

Logic X and 9 looking for third party plugins in the wrong place Mavericks

Hi all
i'm having trouble loading up old sessions in logicX and Logic 9 with my recent upgrade of computer which came with mavericks.
can anybody please help me!!
Logic is searching for third party plugins like this:
this is a real pain because when i replace the plugin with the exact same plugin from its propper location i loose all the settings that were originaly used.
thanks in advance
Mitch

See if this helps: Find your hardware serial number.
and About This Mac

Generate CSR for Third-Party Certificates

Hi All,
i have an issue when i tried to Generate CSR for Third-Party Certificates,
i follow step by step in the document of cisco until this step:
3.
Now that your CSR is ready, copy and paste the CSR information into any CA enrollment tool.
In order to copy and paste the information into the enrollment form, open the file in a text editor that
does not add extra characters. Cisco recommends that you use Microsoft Notepad or UNIX vi. Refer
to the website of the third−party CA for more information on how to submit the CSR through the
enrollment tool.
After you submit the CSR to the third−party CA, the third−party CA digitally signs the certificate and
sends back the signed certificate via e−mail.
4.
Copy the signed certificate information that you receive back from the CA into a file.
This example names the file CA.pem.
my issue is where i sould copy and paste the CSR information into any CA enrollment tool. i just have done create mykey.pem and myreq.pem in my folder OpenSSL\bin
Please help and Thanks you.
Regards,
Jasa

you have to do more steps using openssl.
before you obtain the third−part certificate, you have to copy that on a notepad text, and you have to obtain an intermediate and root certificate from the company that gives you the certificate.
Then you have to copy and paste on a notepad or gedit:
SSL (the certificate that they give you)
Intermediate (the certificate that you obtain from the company that gives you the certificate)
Root (the certificate that you obtain from the company that gives you the certificate)
name the text file like: allcerts.pem
then... you have to run this commands:
C:\OpenSSL\bin>openssl pkcs12 -export -in allcerts.pem -inkey mykey.pem -out All-certs.p12 -clcerts -passin pass:yourpassword -passout pass:yourpassowrd
C:\OpenSSL\bin>openssl pkcs12 -in All-certs.p12 -out finalcert.pem -passin pass:yourpassword -passout pass:yourpassword
Then you are going to have a file named: finalcert.pem, thats the one you have to update to the WLC. please note that on those lines "yourpassword" is the password you use when you create the certificate and its going to be the same that you have to use for upload to WLC.
Note that you have to use openssl version 0.9.8 because its the only version thats WLC support
If you have doubts please contact me.
Have fun!

Shipto Address for Third Party PO

Hi, can anyone advise is there a standard configuration to pick the shipto location from SO which generates the PR for third party scenario? This is bcos the shipto address in the PR should reflect the one from the SO header so that vendor knows where to ship the goods in such case. Currently, the shipto address is based on the plant or SLOC in the PR item which is not correct.
Thanks
PP

Hi Wong
Pl check the logic used in your smartform / sapscript form assigned to the print output.
The source fields might have been wrongly mapped.
with kind regards
Sundar

JPEG Export Settings for third party printing.

Similar Messages

Maybe you are looking for