JPEG Library error

In Dreamweaver, I keep getting a windows pop-up error message
that says:
JPEG Library error Corrupt JPG data:
67 extraneous bytes before marker 0xc0
Does anyone know what this means and how to correct
it?

On Fri, 16 Jan 2009, TurboBill wrote
>The link you refer to is dead.
> <
http://www.cb1.com/~john/computing/emacs/lisp/graphics/jpeg-mode.el>
>
It isn't. Here it is in short form.
http://tinyurl.com/8glmne
> I installed Irfranview. The problem is there are a ton
of jpgs in the folder
>and I don't know which one is causing the problem, so I
will have to open each
>one and then save it. There is a batch mode but I am not
sure if I can just
>batch open and then save all without changing anything. I
sure don't want to
>change the file names.
You can convert a jpeg to a jpeg.
Set up test directories and files and In Batch conversion
choose the
jpegs, and save them as jpegs. Conversion doesn't change file
names.
With quality set to 100% there shouldn't be significant image
degradation.
Richard Mason
http://www.emdpi.com

Similar Messages

Getting JPEG Library Error for Corrupt JPEG Data using CS5

After recently upgrading to CS5 I am getting JPEG Library Errors for corrupt JPEG data. I have my old PC still in use that uses CS4 and does not generate these errors when accessing the same site. Could someone please assist me in how to get rid of these errors using CS5? I can't find help out there anywhere for this!
Thanks in advance!

You could use Photoshop's Image Processor to open all of your jpegs in a given folder, make a slight tweek and resave them in the hopes of cleaning out any errors that DW is hitting. It's worth a shot maybe.
1. In PS go to File > Scripts > Image Processor
2. For Step 1, browse to a folder in your site with jpeg issues
3. For Step 2, choose save in same location
4. For Step 3, choose Save as JPEG and check Convert File to sRGB
5. Click Run
This will create a sub folder called JPEG with the images resaved there. You can drag them into the parent folder to replace the originals.
If you haven't already, make sure to report the bug here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
At least the right people will be made aware of it then and if it's common enough to trip whatever quantity/user reports system they use, it would get included for repair.
I honestly don't think it's a "bug" per se, since the forum isn't absolutely flooded with the problem.

JPEG Library Error Warning: unknown JFIF revision number 2.01

Recently I started to recieve the following error in Dreamweaver CS4.
JPEG Library Error
Warning: unknown JFIF revision number 2.01
I read the sparse suggestions online which said a file might be corrupt. I currently maintain a lot of sub-websites under a large directory and it would be almost impossible to check every single image on the server. I get the error even if nothing is opened but the program. Is there another solution to finding out which image is causing this problem?

Some of the Adobe software reportedly tosses that diagnostic when it finds a JPEG image file that slightly puzzles it.
I'd suspect you're running some older Adobe bits, if I've guessed right about the source of that error and if your Adobe versions are of roughly the same vintage as OS X 10.6.8.
Looking at the console log is... ah... how do I phrase this... not without its own form of hazard, due to the plethora of innocuous but ominious-sounding messages that can get logged there. Figuring out which of the messages are things to be concerned about isn't easy, unfortunately.
But this error? I'd ignore it, unless you've got some malfunctioning image software somewhere, and/or unless there are patches or updates for whatever package is tossing this available.

Contruibute CS3 - Jpeg Library Error

When I click to edit i am getting the following error message "corrupt JPEG data 12 extraneous bytes before maker 0xdb" any ideas?
The program locks up and closes out, I am unable to delete the draft.

On Fri, 16 Jan 2009, TurboBill wrote
>The link you refer to is dead.
> <
http://www.cb1.com/~john/computing/emacs/lisp/graphics/jpeg-mode.el>
>
It isn't. Here it is in short form.
http://tinyurl.com/8glmne
> I installed Irfranview. The problem is there are a ton
of jpgs in the folder
>and I don't know which one is causing the problem, so I
will have to open each
>one and then save it. There is a batch mode but I am not
sure if I can just
>batch open and then save all without changing anything. I
sure don't want to
>change the file names.
You can convert a jpeg to a jpeg.
Set up test directories and files and In Batch conversion
choose the
jpegs, and save them as jpegs. Conversion doesn't change file
names.
With quality set to 100% there shouldn't be significant image
degradation.
Richard Mason
http://www.emdpi.com

Library error:corrupt JPEG data:2699 extraneous bytes before marker 0xe2

How can I fix this library error: corrupt JPEG data:2699 extraneous bytes before marker 0xe2
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
      <div id="head-nav">
        <ul>
          <li><a href="../about/contactus.html"> Contact us</a></li>
          <span class="spacer">|</span>
          <li><a href="../news/news.html">News</a></li>
          <span class="spacer">|</span>
          <li><a href="../events/events.html" target="_new">Events</a></li>
          <span class="spacer">|</span>
          <li><a href="../hr/index.html">Careers</a></li>
          <span class="spacer">|</span>
          <li><a href="../volunteer/index.html">Volunteer</a></li>
        </ul>
        <form action="http://www.bancroftneurohealth.org/search.html" id="cse-search-box">
          <div class="search">
            <input type="hidden" name="cx" value="008757697627747439989:fqakzcjmvkq" />
            <input type="hidden" name="cof" value="FORID:9" />
            <input type="hidden" name="ie" value="UTF-8" />
            <input type="text" name="q" size="31" />
            <input type="submit" name="sa" value="Search" />
          </div>
        </form>
        <script type="text/javascript" src="http://www.google.com/cse/brand?form=cse-search-box&lang=en"></script>
      </div>

I think the error is with the marker within the search box. I did not create the search box but need to update the nav list within the div where the search box resides. Anyone have experience with the google cse-search box below?
"cse-search-box">
          <div class="search">
            <input type="hidden" name="cx" value="008757697627747439989:fqakzcjmvkq" />
            <input type="hidden" name="cof" value="FORID:9" />
            <input type="hidden" name="ie" value="UTF-8" />
            <input type="text" name="q" size="31" />
            <input type="submit" name="sa" value="Search" />
          </div>
        </form>
        <script type="text/javascript" src="http://www.google.com/cse/brand?form=cse-search-box&lang=en"></script>
      </div>
    I think the marker within the search box is causing the error. I did not create this search box but need to update the navigation
div which contains this search box.

Odd jpeg version errors 6.2 and 7 in glib/gtk

Hi,
I keep getting this error with a gtk benchmarking program:
error message: Failed to load image 'image.jpg': Error interpreting JPEG image file (Wrong JPEG library version: library is 62, caller expects 70)
I recompiled:
- Glib
- GTK
- LibJPEG
- Codeblocks (also because of another issue)
And i keep getting this issue.
When i run: ldd /usr/lib/gtk-2.0/2.10.0/loaders/libpixbufloader-jpeg.so that returns:
[mark@Mark-Arch ~]$ ldd /usr/lib/gtk-2.0/2.10.0/loaders/libpixbufloader-jpeg.so
linux-vdso.so.1 => (0x00007fff88eb1000)
libjpeg.so.7 => /usr/lib/libjpeg.so.7 (0x00007fc561ed7000)
libgdk_pixbuf-2.0.so.0 => /usr/lib/libgdk_pixbuf-2.0.so.0 (0x00007fc561cb9000)
libgio-2.0.so.0 => /usr/lib/libgio-2.0.so.0 (0x00007fc561a0b000)
libresolv.so.2 => /lib/libresolv.so.2 (0x00007fc5617f5000)
libgobject-2.0.so.0 => /usr/lib/libgobject-2.0.so.0 (0x00007fc5615b0000)
libgmodule-2.0.so.0 => /usr/lib/libgmodule-2.0.so.0 (0x00007fc5613ac000)
libdl.so.2 => /lib/libdl.so.2 (0x00007fc5611a8000)
libglib-2.0.so.0 => /usr/lib/libglib-2.0.so.0 (0x00007fc560ec5000)
libpng12.so.0 => /usr/lib/libpng12.so.0 (0x00007fc560c9c000)
libm.so.6 => /lib/libm.so.6 (0x00007fc560a1a000)
libc.so.6 => /lib/libc.so.6 (0x00007fc5606c7000)
/lib/ld-linux-x86-64.so.2 (0x00007fc56233b000)
libz.so.1 => /usr/lib/libz.so.1 (0x00007fc5604b1000)
[mark@Mark-Arch ~]$
So, jpeg seems to be linked against version 7 but the actual jpeg version seems to be 6.2! Could someone explain me what's going wrong here and more importantly how to fix this?
as for libjpeg. i saw nothing strange in the PKGBUILD for that file so how come that this still acts so strange in glib?
Thanx,
Mark
Last edited by markg85 (2009-08-29 00:42:06)

Allan wrote:
You can just use ABS to download it at the moment.
Edit:
# Maintainer Stefan Husmann <[email protected]>
# Contributor: Mihai Militaru <[email protected]>
# Contributor: scippio <[email protected]>
pkgname=freeimage
pkgver=3.12.0
pkgrel=2
pkgdesc="Library project for developers who would like to support popular graphics image formats."
arch=('i686' 'x86_64')
license=('GPL' 'custom:FIPL')
url="http://freeimage.sourceforge.net/"
depends=('gcc-libs')
makedepends=('hd2u')
source=(http://dfn.dl.sourceforge.net/sourceforge/freeimage/FreeImage3120.zip)
md5sums=('47b259102f776a4bcd7affc00942f3b4')
build() {
cd ${srcdir}/FreeImage
make || return 1
make DESTDIR=${pkgdir} install || return 1
make -f Makefile.fip || return 1
make -f Makefile.fip DESTDIR=${pkgdir} install || return 1
install -Dm644 $srcdir/FreeImage/license-fi.txt \
$pkgdir/usr/share/licenses/$pkgname/license-fi.txt
Recompiled it and rebuilded my benchmark script. Still the same issue.
However there is another more strange issue.. FreeImage alone worked fine and is working fine.. just the combination i use is giving problems or so it seems.

JMF Improper call to JPEG library in state 210

Hi
I would like to discuss an issue that has been driving me mad for quite some time now.
I have an application that displays the stream of a microsoft webcam with WDM interface, and grabbing a frame in order to create a photograph of my users, everything works just fine but sometimes (like 1 every 15), the stream does not display and instead a purple square does. I check the console output and this message from stderr displays over and over again:
Corrupt JPEG data: 266315 extraneous bytes before marker 0x2a
Unsupported marker type 0x2a
Improper call to JPEG library in state 210
Improper call to JPEG library in state 210
Improper call to JPEG library in state 210
Improper call to JPEG library in state 210
Improper call to JPEG library in state 210
Improper call to JPEG library in state 210
Improper call to JPEG library in state 210
Improper call to JPEG library in state 210
Improper call to JPEG library in state 210
Improper call to JPEG library in state 210
Improper call to JPEG library in state 210
and only if I reinit my application the streams shows up again. I´ve tried everything but still getting this error, do you know what the source of this problem may be? have you encountered before?
Thank you

I looked more into the JMF stream and found that every time the processor does not configure the stream does not send indication for begening and end of frames. The way I determined this was by checking SBIT=0 and GOB=0 , indicating start of new frame.
I don't think is illegal as per the RFC, could anyone tell me what could be going wrong here.
Any help will be greatly appreciated.
Cheers

Please help! Shared Library Error... no applications will open!

Hi. Major issues!!
My computer was unplugged for 2 weeks (renovations). When I set it up in my new office, none of my applications would open! (Microsoft, Adobe, AOL, etc...) Safari is working.
I get this error message:
The application "Photoshop" could not be launched because of a shared library error: "5<application><CarbonLib><CFMPriv_SpeechRecognition>"
The application "Word" could not be launched because of a shared library error:
"8<Microsoft Word><CarbonLib><CFMPriv_SpeechRecognition>"
The application "AOL" could not be launched because of a shared library error:
"9<AOL (Bootstrap)><CarbonLib><CFMPriv_SpeechRecognition>"
The application "AppleWorks" could not be launched because of a shared library error: "4<AppleWorks><CarbonLib><CFMPriv_SpeechRecognition>"
Here's what I've tried...
I have tried to install combo update 10.3.9. .. didn't work.
My computer was purchased in 2004... just moved to a new house... do not know where my installation dvd is... so to reboot on that is not an option.
I tried disk repair permissions... didn't work!
I opened my log console to view the crash logs... and it appears a lot has crashed... but I can not understand what any of it means!?!
Can anyone help or offer some advice?
Can anyone understand a crash log if I post it?
Please help!?! Taking an online masters course and this is a major dilemma!
Thanks,
Lindsay

Hi Lindsay,
"Can I get one from a mac store? Does it have to be the original one I used when I purchased my mac?"
No, you can no longer purchase 10.3 Panther disks from Apple Stores, online or otherwise. You may however, be able to purchase replacement disks for your computer (if Mac OS 10.3 were the original install disks that came with your mac) by calling Apple and explaining and having the serial number ready of the computer.
If your installation of 10.3 was an upgrade you can purchase retail copies of 10.3 disks online from many resellers, such as on ebay or sites such as FastMac, but be sure to purchase a retail box set and not upgrade or machine specific disks.
Did you perform all of the steps that Kappy steered you to in Dr. Smoke's FAQ first and your only option left is the Archive and Install?
littleshoulders

HFM Application Library error Null while deploying the validated app

Hello,
I am trying to deploy a HFM application on EPM 11.1.3 and when I right click on the application in Application library of EPMA, I am getting a pop-up with the following error:
Application Library Error
null
Please note:
1. This is a EPMA managed HFM application.
2. The validation of the application is successful.
3. Deployement errors with the above error.
4. It is on Windows 2003 server with MSServer as the RDBMS.
Please help me resolve this issue.
thanks,
Ankit

Hi Ankit,
This would be normally resolved by Restarting the EPM Services and also remember to restart the Calculation manager services as well.
Once the services are restarted try deploying the application again to see if it deploys successfully.
Hope this helps,
Thank you,
Charles Babu J

ITunes crashes when doing a power search. I get a Microsoft Visual C Runtime Library Error message: Program C:\Program Files (x86)\iTunes\iTunes.exe R6025. Pure virtual functional call. If I select ok, Windows 7 pops up with iTunes has stopped working

iTunes crashes when doing a power search. I get a Microsoft Visual C Runtime Library Error message: Program C:\Program Files (x86)\iTunes\iTunes.exe R6025. Pure virtual functional call. If I select ok, Windows 7 pops up with iTunes has stopped working and then it shuts iTunes down. Anyone else every have this issue. Any ideas on a fix?
Thanks,

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

B575: Microsoft Visual C++ Runtime Library Error on Startup? Please Help!

This came out of the blue, I just started up my laptop and out of no where my Windows 7 Ultimate transperancy graphics are gone and I can't connect to the internet! I get this message on startup saying 'Microsoft Visual C++ Runtime Library Error', for controlhandler.cpp and I have no clue what it is! I tried a clean boot and safemode boot, and it is the same thing! Please help
Solved!
Go to Solution.

hi ironmax,
As a last resort, you can:
1. Press the One Key Recovery button to restore the unit from factory settings or
2. Create a recovery disc and use this disc to restore the system from factory
Note:
Backup important before doing a factory reset
Regards,
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Microsoft Visual C++ Runtime Library Error in T430S during HP printer install

I just bought a T430S Windows 8 and I'm having problems installing the software and drivers for my HP Photosmart D-110-a printer. I've owned the printer for a year and it was no problem installing the software that it came with on my previous Dell Windows 7. Every time I try to install from the CD-Rom or download the software from HP, I get a Microsoft Visual C++ Runtime Library Error message. Please someone help!
By the way, I am able to print to the machine because I think HP printer driver was preloaded on the Start screen from Lenovo. Is it possible the reason why I can't install the software that the my HP printer came with, is because HP driver was preloaded? The issue of not being able to install the full software, is that I can't monitor ink levels or scan items from the computer.

It looks to me like HP never made a windows8 driver for that printer. You might read this:
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers-e-g-Windows-8/windows-8-driver-hp-p...

Shared Library Error after software update

After a software update check, I downloaded all recommendations which were the following: Java for Mac OS X 10.4 Release 5, iTunes 7.1, iPhoto Update 6.0.6, Security Update 2006-008 (PPC) 1.0, and Mac OS X Update (PPC) 10.4.9.
But upon restarting, I get 2 popup windows entitled Application Launch Failure. The first says: The application "(null)" could not be launched because of a shared library error: "5>HP Communications><CarbonLib><CFMPriv_CarbonSound>". The second reads: The application "EEventManager" could not be launched because of a shared library error: "1<EEventManager><CarbonLib><CFMPriv_CarbonSound>". I also get one when I try to launch AOL from the desktop. It also has the string with CarbonSound in it.
I tried reinstalling all of the updates and the Security update didn't work at all - which didn't seem to matter since it was an older version (I think??). I then reinstalled the OS update again, but this time I did the combo version. Still no luck. I looked into CarbonSound, but I haven't found anything current or relevant. Any suggestions? Thank you.
1.25 ghz ppc g4 Mac OS X (10.4.9)

You might want to post your question in the Mac OS X v10.4 Tiger forum.

I have Adobe Illustrator CS5 Runtime C++ Library Error Message

When I open a large Ai file I get an error saying Runtime C++ Library error, how do I fix it? It works with small files but not my large one, this is the only program it has been doing it and just occurred recently within the last week. I have Windows 7 (PC obviously), I've tried uninstalling the programs and re-installing, deleting folders/files and restarting the program and still comes up when I try to open just one file, that's pretty big and don't know what else to do.
-Amanda

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

Appleworks 6 will not open I get a "shared library error" message. What can I do

Appleworks 6 will not open. I get a "shared library error" message. What can I do?

Hi, Bob. Welcome to Apple Support Communities.
Try posting in AppleWorks Discussions:
https://discussions.apple.com/community/applications/appleworks?view=discussions

JPEG Library error

Similar Messages

Maybe you are looking for