JQuery Puzzler

Apologies in advance for posting this purely jQuery question here but, what can I say? I am stuck and desperate. So, please have pity and help me anyhow...sniffle...sniffle
I need to create a compound jQuery selector but, I need the condition to be AND rather than OR. The goal is to add an additional class to two columns in a table wherever Column A = Val1 AND Column B = Val2.
For example:
'td[headers="CLEARERID"] select option:selected:contains(013), td[headers="MARGINING_ACCOUNT"] select option:selected:contains(H)'
The above selector will find cells where the column is CLEARERID and the value is 013 OR the column is MARGINING_ACCOUNT and the value is H
The problem with it being an OR is that, in rows where CLEARERID = 014 and MARGINING_ACCOUNT is H, the MARGINING_ACCOUNT is getting the additional class which is wrong.
Probably something simple but, been stuck on this for a while now.
Thanks,
-Joe

Oh, that's too bad.
I'm going to keep this unanswered for a little while longer just in case someone else knows of a "trick" to accomplish this but, I will, regretfully, proceed with the loop coding. I had already read that selector reference page and, like you, didn't get what I wanted there either.
Some folks have suggested a filter operator to achieve an AND condition but, it won't work in this example, because it would have to be true both that the column was CLEARINGID and that the column was MARGINING_ACCOUNT which, of course, isn't possible.
Thanks for the reply, Jari.
-Joe

Similar Messages

Dreamweaver template files updating, but javascript/jquery not being called on random pages.

Hello,
I have been tasked with updating the navigation on a site that is using a Dreamweaver template (DWT) as the base file. The navigation was originally built using jQuery navigation UI, however this did not address all of our needs and I have updated it with another version of an accordion.
The .dwt file only is only controlling the navigation and the head of the site.
I have integrated the new xhtml structure and added/removed javascript/jquery into the .dwt file. I saved the file, therefore updating all of the relevant .html files, and verified that the accordion works.
However - the accordion does not work for all of the xhtml files. Some files, seemingly at random, are not pulling in the javascript.
When opening the relevant .html files, I can verify that they have all been updated with the new xhtml and the correct javasctipt. However, when viewing the .html files that are not displaying correctly with FireBug, I can see that none of the jquery/javascript is being applied to the navigation (classes are missing that are injected into the xhtml, but the structure and css is correct).
I've done some research and the only issues I've been able to find are related to .xhtml files not being updated with the correct code, but in my case all of the affected files have the correct xhtml and scripts in the head.
Does anyone have any light to shed on this subject? I am quite puzzled.

While I understand that looking at code is the ultimate way to find a solution, the intent of my question was not "how do i fix this" or "what is wrong with my code" but rather "does anyone have any idea as to why this would be happening". Or even, "where would you start to troubleshoot this".
I made my question general as such because I intended on trying to troubleshoot on my own in order to better understand the issue.
Thank you for stating the obvious, not all first time forum posters are completely unaware of how to ask questions properly.

Gestures and jQuery

With latest Animate update, I see that we need to manually add jquery JS framework in order to make things work, as now Animate only exports its own framework that lacks of many basic functionalities.
For instance, if swipeleft event doesn't work any more without adding manually Jquery, why does Animate still make it appear normally with the rest of events? It just shows a tiny separator between these swipe and the rest of events, but no more warning, and many users are puzzled because they use swipe events then test the movie and then nothing works...
Don't you think the same?
Thanks

Hi,
So, i just tested this composition: swipe.zip - Box
using my iPad (iOS 8.1.3).
Swipe events run fine.
Can you send me one of your file?

What Puzzles Me About Apex

Recently I needed to rearrange nearly 50 columns in a "classic" type report in one of my Apex 4.0.1 applications. It was so laborious and tedious. In the "Report" tab, one by one I had to click the up or down arrows on each successive row, all the while keeping my eyes focused on where I was in the report lest I overshoot my target destination and, horrors, lest I mistakenly move the "wrong" column. It was an exercise in patience. How I longed for a simpler way to do this. Even having the option to move an item entirely to the top or entirely to the bottom of the column stack (as supplied for a "shuttle" item, for example) would have helped. But, alas, not even this amenity exists.
After finally completing this task, I began dwelling on other areas in Apex that I (and if one searches through just this past year's posts in this Forum, others as well) find frustrating. I wanted to know what others and, especially, members of the Apex development team, think about these things. Hence, the reason for this post. I am puzzled why the following things have not been addressed.
1) As mentioned at the outset, there is not an easier way to rearrange column ordering in both "classic" and IR reports. When reports (commonly) have 25 or more columns, and especially if one requires one or more columns to be moved from one end of the stack to the other, this is a productivity killer.
2) The Apex API makes it easy to create all sorts of objects within a region: text fields, display only items, dropdowns, popups, and now even JQuery like dynamic actions. But the one item that Apex does not make it easy to create is a hyperlink. This has always puzzled me. Surely one of the fundamental constituants of the web is the hyperlink. All Apex offers are fields (on forms, within SQL queries, etc.) in which the developer may construct a link. But there is no interface that walks the devleoper through the process of creating a link. One may say that creating a link should be one of those basic things every Apex/web developer ought to know. But one may equally apply that logic to most of the other aforementioned items. And I believe creating a hyperlink is more complex than creating, say, an input text field. Instead, one must muddle through the docs or look at previous examples to figure out how to construct an appropriate link. Why is there no step-by-step interface in the Apex API to help with this? There is for, say, a text field or a dropdown, but not for a link. Strange.
3) You need to create a form with 10 columns and 15 rows. Forget it. Apex complains about "a 100 cell limit on a form". This is another one of those puzzlements. What is the rational for this limit? It is so un-realistic and does not jive with today's business requirements. I first ran into this limitation on a form way back in version 1.x. And here we are three major versions ahead and we are still looking at this limitation. Why?
4) A fellow developer recently needed to import a page (not the application, just one of the pages) from one workspace to another. These two workspaces happened to reside in different Oracle instances (Dev and Prod).
Unlike importing an entire application, there is no intuitive way to do this. Instead, one must go into the actual export .SQL file and modify several of the included parameters. And even this is not straightforward. Surely, there needs to be an easier way (meaning, automatic way as in clicking a few buttons).
5) Years ago I used Microsoft's FrontPage tool to create a website. One of its nice features is the ability to automatically generate a "site map" of your website. A diagram would be created in which one may easily see which page "calls" or "redirects" to another page. Over the years I have either created (or inherited) Apex applications that sport 50 or more pages. Starting with, say, page 10, have you ever tried to figure out what page(s) called or redirected to page 10? If your Apex app only has 5 pages total, this is not a big deal. But with 50+pages, this is a big deal. A sitemap would have proved an invaluable productivity enhancer at this point. You might think, well, this would be a great Apex plugin idea. And you would be correct. But what puzzles me is that shouldn't this be a builtin "feature" of the Apex API, especially in a fourth major release of the product? Yes, I'm aware that Apex provides views from which one could gather this type of "which page called another page" information. It's just that I am using an API for the main purpose of making database/web development faster/easier. From a business perspective, this means saving money. For example, strictly speaking one need not bother with JQuery. Everything JQuery can do can be done using straight Javascript. It's just that JQuery provides an API making it much easier to implement common Javascript tasks. It's the same with the Apex API. I should not have to wait for someone to create a "sitemap" plugin. I realize that creating such a sitemap is not trival. Still, the logic/algorithm has existed for years as seen in FrontPage, DreamWeaver, and other APIs. I am puzzled why the APEX API does not already include this feature.
6) Recently, I needed to position several text fields within a given region of a page. It proved to be another exercise in patience. I needed to muddle with css style tags. Save my work. Refresh another browser window in order to see the results. Then go through the whole exercise over and over. Worse, while positioning a field I unitentionally moved other fields and regions into un-expected places on the screen. Worse yet, IE (version 8 and 9) caused these items to appear one way while Firefox (version 3.x) positioned them a different way. When the dust finally settled, I fould myself pining away for a tool like DreamWeaver in which I could just use my mouse to position items on the screen, all the while in the background the tool writes the necessary css style tags (cross browser compatible to boot). Yes, I realize that the Apex API is a "declaritive" environment, not a "GUI" based one. Still, in my code-tempered brain, I believe there is some way to meld the two and make it easier, more intuitive to position fields and regions on a page. This, too, is a great puzzlement to me.
Reading this, one might conclude that Elie is really "down" on Apex. This would be wrong. On the contrary, I like Apex quite alot and have been using it at my various work places over the past seven years. As mentioned at the outset, I wrote this out of my frustration in completing a task that I would have thought should not be so tedious.
Things like dynamic actions are, indeed, useful and even "cool". But in my experience I have found the more "mundane" tasks like rearranging report columns and positioning fields on a page and deciphering the page flow in a website are the things that developers spend the most time on. These are the things that any database/web development API should be attempting to streamline.
So, I am wondering why the above issues (and likely there are others) have not been addressed despite the fact that we are now in the fourth major release.
Thank you.
Elie

Hi, VANJ.
I want to thank you for your comments.
With respect to:
[1]: I did not realize that the "tree view" offers report column rearrangement. I'm so used to using the Component View that I did not bother to check the Tree View all that thoroughly. I guess, then, "I need to".
[2]: I was referring to an Apex interface that allows developers to create different types of links (absolute; relative; specify targets such as "_self", "_blank"; specify anchor tags; mailto links). Especially, I was looking for an interface making it easy to specify the various parts of an Apex link such as the debug flag, the printer friendly tag, and the "pass item/value" pairs tags. I realize none of these things are terribly difficult. Still, I at least cannot always remember the correct syntax for these different types of links. And this is especially true for the syntax needed for the Apex type links. I often need to refer to online docs and such. It just would be a time saver if the Apex API would offer such an interface much like it currently does for many other web ytype components like input fields and such.
[3]: I had always thought that the 100-item limit refers to"100 cells" in a form. I did not realize that this is referring to 100 page items. That said, I would have sworn that I had received an error about this limit on a form page. And I definitely did not have more than 100 page items on that page. I am not sure if the 100-page item limit also includes "page 0 "type items since these appear on every page in the application. In any case, I seriously doubt that I had anywhere close to 100 page items (page 0 or otherwise) on my form page when encountering this limit. Also, considering the numerous comments on this Forum about this "limit", I doubt that these unfortunate souls also had more than 100 page items on their page when they experienced this same "limit". In any case, it's an easy thing to check out, and so, I will do that.
[4]: What I had hoped for was a GUI type interface that just makes it "drop dead simple" to copy a page from one workspace to another, similar to the intuitive interface Apex provides to importan entire application. I had not heard of the apex_application_install utility. I'll defintely be checking this guy out. Thank you. You said it offers some flexibility. By this, do you mean that it offers a way to import a page from one workspace to another?
[5]: Ah. We do agree here.
[6]: Thanks for mentioning the drag-and-drop feature. I had tried this out and unfortunately it just doesn't really help with respect to positioning regions and items on a page in a cross browser compatible fashion. A WYSIWYG interface would be a great feature in such a robust API as Apex.
Since creating my post, I thought of yet another couple of "puzzlements" I have with the Apex API.
7) I wonder why one may include only a single IR report on a page. This has always baffled me. I am aware that one can create a page containing multiple iframes. And then populate each iframe with an IR report that really resides on its own separate page. I've tried this technique and it works very nicely. Still, I can only wonder if the good folks at Oracle/Apex will one day make multiple IR reports ona single page a builtin feature rather than having to rely on this iframe workaround or a JQuery set of page tabs workaround.
8) Again with respect to IR reports, I am puzzled why an IR report can be based solely on SQL as opposed to PLSQL. I did find a workaround to this limitation by using an Oracle table function as the underpinning of the IR report. This works. Still it is a kludge. And so, as with (7), I can only hope a future release of Apex will remove this limitation.
Thank you.
Elie

Jquery div starting positioning

I'm trying to learn jquery. Built this page in dreamweaver. In theory it works, I can drag the puzzle pieces around and connect them.
However, I want the pieces to initially start from the top left corner layered on top of each other, then drag them into position.
I tried adding a stack function in my jquery but it didn't work. Does anyone see what what is missing from my code? Any help would be appreciated.
<!DOCTYPE HTML>
<html>
<head>
<meta charset="utf-8">
<title>Drag and Drop</title>
<script src="http://code.jquery.com/jquery-1.8.2.js"></script>
<script src="http://code.jquery.com/ui/1.9.1/jquery-ui.js"></script>
<script>
$(document).ready(function() {
$(".pieces img").draggable();
</script>
<style>
div {
display: inline-block;
cursor: move;
position: absolute;
top: 10px;
left: 10px;
</style>
</head>
<body>
<div class="container">
<div class="pieces">
<img src="images/puzzle1.png"/>
<img src="images/puzzle2.png"/>
<img src="images/puzzle3.png"/>
<img src="images/puzzle4.png"/>
<img src="images/puzzle5.png"/>
<img src="images/puzzle6.png"/>
<img src="images/puzzle7.png"/>
<img src="images/puzzle8.png"/>
<img src="images/puzzle9.png"/>
<img src="images/puzzle10.png"/>
<img src="images/puzzle11.png"/>
<img src="images/puzzle12.png"/>
</div>
</div>
</body>
</html>

Can you give us a link to your actual webpage so we can debug?

HTML 5 code having a jquery slider is working in safari 4 (also other browsers). Its not working in safari 5.

HTML 5 code having a jquery slider function is working in safari 4. It is also working in IE9, IE8, Firefox 13. In Safari 5, it is not loading. Also CSS is not loading correctly. Its showing failed to load

HTML 5 code having a jquery slider function is working in safari 4. It is also working in IE9, IE8, Firefox 13. In Safari 5, it is not loading. Also CSS is not loading correctly. Its showing failed to load

Can no longer open NY Times puzzles: "puz could not be opened, because an unknown error occurred.?

Since updating Firefox, I can no longer open the NY Times daily/Sunday puzzle in the program used for crossword puzzles. Older puzzles sall open.

If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

Jquery is not working after i enable the attachments in Share Point EditForm

Hi ,
I have customized the Edit form .After customization the attachment functionality is not working and resolved the issue by creating the new Edit form .The attachments section only works if i don't push any j query/java script functions.If i comment below
line two lines the attachment sections works.But i would need to include them .Could you tell me how would i call below script in EditForm.
//_spBodyOnLoadFunctionNames.push("Test");
//_spBodyOnLoadFunctionNames.push("checkStatus");
<script>
function redirect(offerID)
var loc = "DispForm.aspx?ID=" + offerID;
window.location.href = loc;
function Test()
var TitleValue = "Drafting Communication";//$('#ctl00_m_g_1918401d_e6f3_4b9b_9262_dbb4aabcfd12_ff11_ctl00_ctl00_TextField').val();
alert(TitleValue );
if(TitleValue =="Drafting Communication")
$("select[Title='Workflow Stage']").find('option:contains("Stage 1 – Review")').remove();
$("select[Title='Workflow Stage']").find('option:contains("Stage 2 – Review")').remove();
$("select[Title='Workflow Stage']").find('option:contains("Stage 3 – Review")').remove();
$("select[Title='Workflow Stage']").find('option:contains("Stage 4 – Review")').remove();
else if(TitleValue =="Stage-1 Pre Approval Business")
$("select[Title='Workflow Stage']").find('option:contains("Drafting Communication")').remove();
$("select[Title='Workflow Stage']").find('option:contains("Stage 2 – Review")').remove();
$("select[Title='Workflow Stage']").find('option:contains("Stage 3 – Review")').remove();
$("select[Title='Workflow Stage']").find('option:contains("Stage 4 – Review")').remove();
else if(TitleValue =="Stage-2 Approval Marketing")
$("select[Title='Workflow Stage']").find('option:contains("Drafting Communication")').remove();
$("select[Title='Workflow Stage']").find('option:contains("Stage 1 – Review")').remove();
$("select[Title='Workflow Stage']").find('option:contains("Stage 3 – Review")').remove();
$("select[Title='Workflow Stage']").find('option:contains("Stage 4 – Review")').remove();
else if(TitleValue =="Stage-3 Approval Director")
$("select[Title='Workflow Stage']").find('option:contains("Drafting Communication")').remove();
$("select[Title='Workflow Stage']").find('option:contains("Stage 2 – Review")').remove();
$("select[Title='Workflow Stage']").find('option:contains("Stage 1 – Review")').remove();
$("select[Title='Workflow Stage']").find('option:contains("Stage 4 – Review")').remove();
else
$("select[Title='Workflow Stage']").find('option:contains("Drafting Communication")').remove();
$("select[Title='Workflow Stage']").find('option:contains("Stage 2 – Review")').remove();
$("select[Title='Workflow Stage']").find('option:contains("Stage 1 – Review")').remove();
$("select[Title='Workflow Stage']").find('option:contains("Stage 3 – Review")').remove();
$(".SelectA").hide();
function getTagFromIdentifierAndTitle(tagName, title)
var tags = document.getElementsByTagName(tagName);
for (var i=0; i < tags.length; i++) {
var tempString = tags[i].id;
if (tags[i].title== title) {
alert(tags[i].title);
return tags[i].value;
return null;
function checkStatus() {
var selectedId = getField('select','Current Status').options[getField('select','Current Status').selectedIndex].value;
var docID = 73;
if(selectedId == 'Approved')
$("input[value$='Save']").attr('disabled', true);
function getField(fieldType,fieldTitle) {
var docTags = document.getElementsByTagName(fieldType);
for (var i=0; i < docTags.length; i++) {
if (docTags[i].title == fieldTitle) {
return docTags[i]
//_spBodyOnLoadFunctionNames.push("Test");
//_spBodyOnLoadFunctionNames.push("checkStatus");
</script>

Hi,
According to your post, my understanding is that you failed to use the _spBodyOnLoadFunctionNames.push() function.
Per my knowledge, the _spBodyOnLoadFunctionNames.push() is SharePoint's version of jQuery's $(document).ready() or $(function(){}).
I recommend you to add a content-editor-webpart on the page and add the code below on the source editor to check whether it works.
<script language="javascript">
_spBodyOnLoadFunctionNames.push("FunctionName");
function FunctionName(){
  alert(Test);
</script>
More information:
SharePoint JavaScript – Page Load Add function: _spBodyOnLoadFunctionNames
If it works well, the issues is caused by the functions you created.
You need to check whether your code are correct.
In addition, you can make init.js loaded before _spBodyOnLoadFunctionNames.
Here is a similar thread for your reference:
http://sharepoint.stackexchange.com/questions/93937/spbodyonloadfunctionnames-not-working-on-master-page
Best Regards,
Linda Li
Linda Li
TechNet Community Support

[SOLVED] Puzzled: Web site visible on network but not outside network

Edit: Ok, nevermind . . . somehow the problem has resolved itself. Perhaps my ISP was having a bad hair day or something.
I'm puzzled by this small problem I'm having. It is NOT a critical problem or anything, just something I'd like to solve.
I've installed the LAMP packages, set up a small MySQL database and made a very simple web interface for it. The web pages open fine on my main computer and all the other computers on our network, but it is not visible outside our network.
I am behind a router and I have forwarded port 80 to my local IP. I've set httpd: ALL, http: ALL and (finally) ALL: ALL: ACCEPT in /etc/hosts.
I got to thinking maybe my ISP (RoadRunner) is blocking port 80 requests to my home, so I changed the port to 9292 and forwarded that to my local IP. Still not visible from the outside.
I've tinkered with the /etc/httpd/conf/httpd.conf file (pasted in below) but still there is no outside connectivity, changing the listen settings and the server name settings. I can still access it fine from this side of the router. I've restarted the httpd service many times.
I've done all I can think to do to solve the issue. it is likely I am overlooking something very basic. Any help or ideas are appreciated. Below is my httpd.conf.
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd//var/log/httpd/foo_log".
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 192.168.1.100:9292
#Listen *:9292
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule php5_module modules/libphp5.so
LoadModule php5_module /usr/lib/httpd/modules/libphp5.so
AddHandler php5-script php
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
ServerName 192.168.1.100:9292
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /var/run/httpd/cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
Include conf/extra/php5_module.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
Last edited by Rumor (2009-01-29 15:04:27)

You could try a factory reset of the home hub, as sometimes the config can get corrupted.
There is some general help on this page.
Help with setting up routers, wireless repeaters, TVs and printers, CCTV cameras, VOIP Phones
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

How do i change the path of data ajax false from returning to homepage, when using a PHP mail form in jquery mobile?

I have a put a php mail form in the quote page of my mobile site. However when i send the form it returns to the route page rather than the quote page, i have used the data ajax false action as i dont want to send via ajax. i have left the thanks page blank as i want it to remain on the same page showing sent or declined message. Can someone help please?
<?php
// OPTIONS - PLEASE CONFIGURE THESE BEFORE USE!
$yourEmail = "[email protected]"; // the email address you wish to receive these mails through
$yourWebsite = "www.firstcalltransport.co.uk"; // the name of your website
$thanksPage = ''; // URL to 'thanks for sending mail' page; leave empty to keep message on the same page
$maxPoints = 4; // max points a person can hit before it refuses to submit - recommend 4
$requiredFields = "name,email,collection,delivery,comments"; // names of the fields you'd like to be required as a minimum, separate each field with a comma
// DO NOT EDIT BELOW HERE
$error_msg = array();
$result = null;
$requiredFields = explode(",", $requiredFields);
function clean($data) {
$data = trim(stripslashes(strip_tags($data)));
return $data;
function isBot() {
$bots = array("Indy", "Blaiz", "Java", "libwww-perl", "Python", "OutfoxBot", "User-Agent", "PycURL", "AlphaServer", "T8Abot", "Syntryx", "WinHttp", "WebBandit", "nicebot", "Teoma", "alexa", "froogle", "inktomi", "looksmart", "URL_Spider_SQL", "Firefly", "NationalDirectory", "Ask Jeeves", "TECNOSEEK", "InfoSeek", "WebFindBot", "girafabot", "crawler", "www.galaxy.com", "Googlebot", "Scooter", "Slurp", "appie", "FAST", "WebBug", "Spade", "ZyBorg", "rabaz");
foreach ($bots as $bot)
if (stripos($_SERVER['HTTP_USER_AGENT'], $bot) !== false)
return true;
if (empty($_SERVER['HTTP_USER_AGENT']) || $_SERVER['HTTP_USER_AGENT'] == " ")
return true;
return false;
if ($_SERVER['REQUEST_METHOD'] == "POST") {
if (isBot() !== false)
$error_msg[] = "No bots please! UA reported as: ".$_SERVER['HTTP_USER_AGENT'];
// lets check a few things - not enough to trigger an error on their own, but worth assigning a spam score..
// score quickly adds up therefore allowing genuine users with 'accidental' score through but cutting out real spam
$points = (int)0;
foreach ($badwords as $word)
if (
strpos(strtolower($_POST['comments']), $word) !== false ||
strpos(strtolower($_POST['name']), $word) !== false
$points += 2;
if (strpos($_POST['comments'], "http://") !== false || strpos($_POST['comments'], "www.") !== false)
$points += 2;
if (isset($_POST['nojs']))
$points += 1;
if (preg_match("/(<.*>)/i", $_POST['comments']))
$points += 2;
if (strlen($_POST['name']) < 3)
$points += 1;
if (strlen($_POST['comments']) < 15 || strlen($_POST['comments'] > 1500))
$points += 2;
if (preg_match("/[bcdfghjklmnpqrstvwxyz]{7,}/i", $_POST['comments']))
$points += 1;
// end score assignments
foreach($requiredFields as $field) {
trim($_POST[$field]);
if (!isset($_POST[$field]) || empty($_POST[$field]) && array_pop($error_msg) != "Please fill in all the required fields and submit again.\r\n")
$error_msg[] = "Please fill in all the required fields and submit again.";
if (!empty($_POST['name']) && !preg_match("/^[a-zA-Z-'\s]*$/", stripslashes($_POST['name'])))
$error_msg[] = "The name field must not contain special characters.\r\n";
if (!empty($_POST['email']) && !preg_match('/^([a-z0-9])(([-a-z0-9._])*([a-z0-9]))*\@([a-z0-9])(([a-z0-9-])*([a-z0-9]))+ ' . '(\.([a-z0-9])([-a-z0-9_-])?([a-z0-9])+)+$/i', strtolower($_POST['email'])))
$error_msg[] = "That is not a valid e-mail address.\r\n";
if (!empty($_POST['url']) && !preg_match('/^(http|https):\/\/(([A-Z0-9][A-Z0-9_-]*)(\.[A-Z0-9][A-Z0-9_-]*)+)(:(\d+))?\ /?/i', $_POST['url']))
$error_msg[] = "Invalid website url.\r\n";
if ($error_msg == NULL && $points <= $maxPoints) {
$subject = "Automatic Form Email";
$message = "You received this e-mail message through your website: \n\n";
foreach ($_POST as $key => $val) {
if (is_array($val)) {
foreach ($val as $subval) {
$message .= ucwords($key) . ": " . clean($subval) . "\r\n";
} else {
$message .= ucwords($key) . ": " . clean($val) . "\r\n";
$message .= "\r\n";
$message .= 'IP: '.$_SERVER['REMOTE_ADDR']."\r\n";
$message .= 'Browser: '.$_SERVER['HTTP_USER_AGENT']."\r\n";
$message .= 'Points: '.$points;
if (strstr($_SERVER['SERVER_SOFTWARE'], "Win")) {
$headers   = "From: $yourEmail\r\n";
} else {
$headers   = "From: $yourWebsite <$yourEmail>\r\n";
$headers .= "Reply-To: {$_POST['email']}\r\n";
if (mail($yourEmail,$subject,$message,$headers)) {
if (!empty($thanksPage)) {
header("Location: $thanksPage");
exit;
} else {
$result = 'Your mail was successfully sent.';
$disable = true;
} else {
$error_msg[] = 'Your mail could not be sent this time. ['.$points.']';
} else {
if (empty($error_msg))
$error_msg[] = 'Your mail looks too much like spam, and could not be sent this time. ['.$points.']';
function get_data($var) {
if (isset($_POST[$var]))
echo htmlspecialchars($_POST[$var]);
?>
<!DOCTYPE HTML>
<html>
<head>
<meta charset="utf-8">
<title>Untitled Document</title>
<link href="CSS/stylesheetnew.css" rel="stylesheet" type="text/css">
<link href="../jquery-mobile/jquery.mobile-1.0a3.min.css" rel="stylesheet" type="text/css">
<script src="../jquery-mobile/jquery-1.5.min.js" type="text/javascript"></script>
<script src="../jquery-mobile/jquery.mobile-1.0a3.min.js" type="text/javascript"></script>
<style type="text/css">
p.error, p.success {
font-weight: bold;
padding: 10px;
border: 1px solid;
p.error {
background: #ffc0c0;
color: #F00;
p.success {
background: #b3ff69;
color: #4fa000;
</style>
</head>
<body>
<div data-role="page" id="home">
<div data-role="header" data-position="fixed">
   <h1>FIRSTCALL TRANSPORT</h1>
</div>
    <div data-role="navbar" data-position="fixed">
                                <ul>
                                  <li><a href="#about">About</a></li>
                                  <li><a href="#services">Services</a></li>
                                  <li><a href="#contact">Contact</a></li>
                                  <li><a href="#quote">Quote</a></li>
                                </ul>
</div>
<div data-role="content"> </div>
     <div data-role="footer" data-position="fixed" > </div>
</div>
</div>
<div data-role="page" id="quote">
<div data-role="header" data-position="fixed">
    <h1>GET A QUOTE</h1>
</div>
<div data-role="content">
   <?php
if (!empty($error_msg)) {
echo '<p class="error">ERROR: '. implode("<br />", $error_msg) . "</p>";
if ($result != NULL) {
echo '<p class="success">'. $result . "</p>";
?>
<form action="<?php echo basename(__FILE__); ?>" method="post" data-ajax="false" >
<noscript>
<p><input type="hidden" name="nojs" id="nojs" /></p>
</noscript>
<p>
<label for="name">Name: *</label>
<input type="text" name="name" id="name" value="<?php get_data("name"); ?>" /><br />
<label for="email">E-mail: *</label>
<input type="text" name="email" id="email" value="<?php get_data("email"); ?>" /><br />
        <label for="company">Company:</label>
<input type="text" name="company" id="company" value="<?php get_data("company"); ?>" /><br />
<label for="collection">Collection: *</label>
<input type="text" name="collection" id="collection" value="<?php get_data("collection"); ?>" /><br />
    <label for="delivery">Delivery: *</label>
<input type="text" name="delivery" id="delivery" value="<?php get_data("delivery"); ?>" /><br />
<label for="comments">Message: *</label>
<textarea name="comments" id="comments" rows="5" cols="20"><?php get_data("comments"); ?></textarea><br />
<input type="submit" name="submit" id="submit" value="Send" <?php if (isset($disable) && $disable === true) echo ' disabled="disabled"'; ?> />
</p>
</form> </div>
     <div data-role="footer" > </div>
</div>
</div>
</body>
</html>

My wife has left me for four weeks, favouring to be with our son who lives 4,000 km away. I now have to cook for myself and the steaks taste horrible. What am I doing wrong?
If you do not know what I have (not) done to make the steak taste horrible, my question is as hard to answer as your question above.
Please give us more info like giving us the code that sends the page to the homepage rather than to the previous page.

Relative Path for Jquery into Content Editor Web Part

Hi;
I'd add a Content Editor Web Part (CEWP) to a web part zone. I'd edit that CEWP in HTML view and add my script which load Jquery and my question : how to use a relative
path for Jquery :
<SharePoint:ScriptLink Name="SP.js" runat="server" OnDemand="true"
Localizable="false" />
<script src="/sites/XXX/Style%20Library/Scripts/jquery.min.js" type="text/javascript"></script>
<script type="text/javascript">
My code
</script>
Regards

Hi;
Firstly, I have used :
<script src="/Style%20Library/Scripts/jquery.min.js" type="text/javascript"></script>
But any result and any change and If I add /Sites/XXX/ : it works correctly ?
My code is :
<SharePoint:ScriptLink Name="SP.js" runat="server" OnDemand="true"
    Localizable="false" />
<script src="/sites/XXX/Style Library/Scripts/jquery.min.js" type="text/javascript"></script>
<script type="text/javascript">
ExecuteOrDelayUntilScriptLoaded(displayTitle, "SP.js");
var site;
var context;
function displayTitle() {
    //Get the current client context
    context = SP.ClientContext.get_current();
    //Add the site to query queue
    site = context.get_web();
    context.load(site);
    //Run the query on the server
    context.executeQueryAsync(onQuerySucceeded, onQueryFailed);
function onQueryFailed(sender, args) {
alert('request failed ' + args.get_message() +
    '\n' + args.get_stackTrace());
function onQuerySucceeded(sender, args) {
    $("#layoutsTable table th span").html("Bienvenue sur le site " + site.get_title() + " - Direction Technique");
   $("#zz17_V4QuickLaunchMenu ul.root li span:contains('Biblioth')").parent().parent().hide();
   $("#zz17_V4QuickLaunchMenu ul.root li span:contains('Listes')").parent().parent().hide();
</script>

Puzzle Game and new Game Problem

Hello Java Programmers,
Once again I have encountered a problem with my ongoing puzzle game. I have completed it all. Now I want my user to be able to start a new game in after they win. I tried repaint and update method with JFrame but it deosn't reshuffle the buttons. How can I do that. The code geos below.
[/b]
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.event.*;
import javax.swing.JOptionPane;
public class PuzzleGame{
   String[] btn_Labels = {"1","2","3","4","5","6","7","8","9",
                        "10","11","12","13","14","15"," "};
   String[] labels = {"1","2","3","4","5","6","7","8","9",
                        "10","11","12","13","14","15"};
   private final int ONE = 1, TWO = 2, THREE = 3, FIVE = 5;
   private boolean WIN_STATE = false;
   private JButton b[];
   public String clicked_btn_label = "";
   //Constructor method.
   public PuzzleGame(){
      showSplashScreen();
      initGame();
   public static void main(String args[]){
      PuzzleGame game = new PuzzleGame();
   //When a new Game started labels of buttons are shuffled using this method.
   public void shuffleNumbers(){
      String temp = null;
      for(int j=0; j<16; j++){
      int k = (int)(Math.random()*16);
      temp = btn_Labels[j];
      btn_Labels[j] = btn_Labels[k];
      btn_Labels[k] = temp;
   //Game initialization method.
   public void initGame(){
      b = new JButton[16];
      JPanel p = new JPanel();
      JFrame frame = new JFrame();
      shuffleNumbers();
      for(int i=0; i<16; i++){
         b[i] = new JButton();
         b.setText(btn_Labels[i]);
b[i].setActionCommand(""+(i+1));
for(int i=0; i<16; i++){
b[i].addActionListener( new ActionListener(){
public void actionPerformed(ActionEvent e){
clicked_btn_label =(String)e.getActionCommand();
doSwapping();
checkWin();
p.add(b[i]);
p.setLayout(new GridLayout(4,4));
frame.getContentPane().add(p);
frame.addWindowListener(new WindowAdapter(){
public void windowClosing(WindowEvent e){
System.exit(0);
Dimension dm = Toolkit.getDefaultToolkit().getScreenSize();
int x = (dm.width - 230)/2;
int y = (dm.height - 240)/2;
frame.setBounds(x,y,320,240);
frame.setSize(340,240);
frame.setVisible(true);
//This method swaps the clicked button with the empty button if it doesn't violate rule.
public void doSwapping(){
int num = Integer.parseInt(clicked_btn_label);
String temp;
if( (num + ONE <= 16) && b[num].getText() == " " && num % 4 != 0){
temp = b[num].getText();
b[num].setText(b[num-ONE].getText());
b[num-ONE].setText(temp);
else if((num - TWO >= 0) && b[num-TWO].getText() == " " && ((num - ONE) % 4 != 0)){
temp = b[num-ONE].getText();
b[num-ONE].setText(b[num-TWO].getText());
b[num-TWO].setText(temp);
else if( (num + THREE < 16) && b[num+THREE].getText() == " "){
temp = b[num-ONE].getText();
b[num-ONE].setText(b[num+THREE].getText());
b[num+THREE].setText(temp);
else if( (num - FIVE >= 0) && b[num-FIVE].getText() == " "){
temp = b[num-ONE].getText();
b[num-ONE].setText(b[num-FIVE].getText());
b[num-FIVE].setText(temp);
// else{}
public void checkWin(){
WIN_STATE = true;
for(int i=0; i<15; i++){
if( b[i].getText() != labels[i])
WIN_STATE = false;
if(WIN_STATE == true){
JOptionPane.showMessageDialog(null,"Congratulations You Have won the Game!","You Win",JOptionPane.INFORMATION_MESSAGE);
     initGame();
public void showSplashScreen(){
JWindow w = new JWindow();
JPanel p = (JPanel)w.getContentPane();
JLabel l = new JLabel(new ImageIcon("splash.jpg"));
Dimension d = Toolkit.getDefaultToolkit().getScreenSize();
int x = (d.width - 230)/2;
int y = (d.height - 240)/2;
p.add(l);
w.setBounds(x,y,320,240);
w.setVisible(true);
try{
Thread.sleep(10000);
catch(Exception e){
w.setVisible(false);
[/b]

Sorry for violation. I would like to add a menubar to the application containing a single menu button for new game. adding a menubar is simple but how can i reshuffle the buttons using methods like update etc. or any other way.

LogMiner puzzle - CLOB datatype

Hello, everybody!
Sorry for the cross-post here and in "Database\SQL and PL/SQL" forum, but the problem I am trying to dig is somewhere between those two areas.
I need a bit of an advice whether the following behavior is wrong an requires SR to be initiated – or I am just missing something.
Setting:
-     Oracle 11.2.0.3 Enterprise Edition 64-bit on Win 2008.
-     Database is running in ARCHIVELOG mode with supplemental logging enabled
- DB_SECUREFILE=PERMITTED (so, by default LOBs will be created as BasicFiles - but I didn't notice any behavior difference comparing to SecureFile implementation)
Test #1. Initial discovery of a problem
1. Setup:
<li> I created a table MISHA_TEST that contains CLOB column
create table misha_test (a number primary key, b_cl CLOB)<li> I run anonymous block that would insert into this table WITHOUT referencing CLOB column
begin
     insert into misha_test (a) values (1);
     commit;
end;2. I looked at generated logs via the LogMiner and found the following entries in V$LOGMNG_CONTENTS:
SQL_REDO
set transaction read write;
insert into "MISHA_TEST"("A","B_CL") values ('1',EMPTY_CLOB());
set transaction read write;
commit;
update "MISHA_TEST" set "B_CL" = NULL where "A" = '1' and ROWID = 'AAAj90AAKAACfqnAAA';
commit;And here I am puzzled: why do we have two operations for a single insert – first write EMPTY_CLOB into B_CL and then update it to NULL? But I didn’t even touch the column B_CL! Seems very strange – why can’t we write NULL to B_CL from the very beginning instead of first creating a pointer and than destroying it.
Key question:
- why NULL value in CLOB column should be handled differently than NULL value in VARCHAR2 column?
Test #2. Quantification
Question:
-     having LOB column in the table seems to cause an overhead of generating more logs. But could it be quantified?
Assumption:
-     My understanding is that CLOBs defined with “storage in row enabled = true” (default) up to ~ 4k of size behave like Varchar2(4000) and only when the size goes above 4k we start using real LOB mechanisms.
Basic test:
1.     Two tables:
<li> With CLOB:
create table misha_test_clob2 (a_nr number primary key, b_tx varchar2(4000), c_dt date, d_cl CLOB)<li>With VARCHAR2:
create table misha_test_clob   (a_nr number primary key, b_tx varchar2(4000), c_dt date, d_cl VARCHAR2(4000))2.     Switch logfile/Insert 1000 rows and populate only A_NR/Switch logfile
insert into misha_test_clob (a_nr)
select level
from dual
connect by level < 10013.     Check sizes of generated logs:
<li>With CLOB – 689,664 bytes
<li>With Varchar2 – 509.440 (<b>or about 26% reduction</b>)
Summary:
<li>the overhead is real. It means that table with VARCHAR2 column is cheaper to maintain, even if you are not using that column. So adding LOB columns to a table "just in case" is a really bad idea.
<li>Having LOB columns in the table that has tons of INSERT operations is expensive.
Just to clarify a real business case - I have a table with some number of attributes, one attribute has CLOB datatype. Frequency of inserts in this table is pretty high, frequency of using CLOB column is pretty low (NOT NULL ~0.1%). But because of that CLOB column I generate a lot more LOG data than I need (about 30% extra). Seems like a real waste of time! For now I requested development team to split the table into two, but that's still a bandage.
So, does anybody care? Comments/suggestions are very welcome!
Thanks a lot!
Michael Rosenblum

Hello, everybody!
Sorry for the cross-post here and in "Database\SQL and PL/SQL" forum, but the problem I am trying to dig is somewhere between those two areas.
I need a bit of an advice whether the following behavior is wrong an requires SR to be initiated – or I am just missing something.
Setting:
-     Oracle 11.2.0.3 Enterprise Edition 64-bit on Win 2008.
-     Database is running in ARCHIVELOG mode with supplemental logging enabled
- DB_SECUREFILE=PERMITTED (so, by default LOBs will be created as BasicFiles - but I didn't notice any behavior difference comparing to SecureFile implementation)
Test #1. Initial discovery of a problem
1. Setup:
<li> I created a table MISHA_TEST that contains CLOB column
create table misha_test (a number primary key, b_cl CLOB)<li> I run anonymous block that would insert into this table WITHOUT referencing CLOB column
begin
     insert into misha_test (a) values (1);
     commit;
end;2. I looked at generated logs via the LogMiner and found the following entries in V$LOGMNG_CONTENTS:
SQL_REDO
set transaction read write;
insert into "MISHA_TEST"("A","B_CL") values ('1',EMPTY_CLOB());
set transaction read write;
commit;
update "MISHA_TEST" set "B_CL" = NULL where "A" = '1' and ROWID = 'AAAj90AAKAACfqnAAA';
commit;And here I am puzzled: why do we have two operations for a single insert – first write EMPTY_CLOB into B_CL and then update it to NULL? But I didn’t even touch the column B_CL! Seems very strange – why can’t we write NULL to B_CL from the very beginning instead of first creating a pointer and than destroying it.
Key question:
- why NULL value in CLOB column should be handled differently than NULL value in VARCHAR2 column?
Test #2. Quantification
Question:
-     having LOB column in the table seems to cause an overhead of generating more logs. But could it be quantified?
Assumption:
-     My understanding is that CLOBs defined with “storage in row enabled = true” (default) up to ~ 4k of size behave like Varchar2(4000) and only when the size goes above 4k we start using real LOB mechanisms.
Basic test:
1.     Two tables:
<li> With CLOB:
create table misha_test_clob2 (a_nr number primary key, b_tx varchar2(4000), c_dt date, d_cl CLOB)<li>With VARCHAR2:
create table misha_test_clob   (a_nr number primary key, b_tx varchar2(4000), c_dt date, d_cl VARCHAR2(4000))2.     Switch logfile/Insert 1000 rows and populate only A_NR/Switch logfile
insert into misha_test_clob (a_nr)
select level
from dual
connect by level < 10013.     Check sizes of generated logs:
<li>With CLOB – 689,664 bytes
<li>With Varchar2 – 509.440 (<b>or about 26% reduction</b>)
Summary:
<li>the overhead is real. It means that table with VARCHAR2 column is cheaper to maintain, even if you are not using that column. So adding LOB columns to a table "just in case" is a really bad idea.
<li>Having LOB columns in the table that has tons of INSERT operations is expensive.
Just to clarify a real business case - I have a table with some number of attributes, one attribute has CLOB datatype. Frequency of inserts in this table is pretty high, frequency of using CLOB column is pretty low (NOT NULL ~0.1%). But because of that CLOB column I generate a lot more LOG data than I need (about 30% extra). Seems like a real waste of time! For now I requested development team to split the table into two, but that's still a bandage.
So, does anybody care? Comments/suggestions are very welcome!
Thanks a lot!
Michael Rosenblum

JQuery slideshow doesn't work

Now that I have the javascript code in the right place in the head, and I have followed all the other instructions to get a jQuery slideshow into my webpage, are there any ideas why it doesn't function as a slideshow please?
In browser preview, one piece of javascript code shows at the top of the page
jQuery(document).ready(function($) { $('#SWAP').cycle({ fx: 'fadeZoom'}); });
and the images for the slideshow are all showing on the page one underneath the other.
Here's all the code for the page, with the relevant code for the slideshow in BOLD:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">

<meta name="description" content="The most recent review of Lunaire Collective printed in The Australian newspaper.">
<meta name="keywords" content="review, The Australian, Whistler, Tom Green, Birtwistle secret theatre">
<title>LUNAIRE COLLECTIVE: Reviews and photos of Lunaire Collective - News and Reviews</title>

<link href="desktop.css" rel="stylesheet" type="text/css">
<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>

<script type="text/javascript" src="js/jquery-1.7.2.min.js"></script>
<script type="text/javascript" src="js/jquery.cycle.all.js"></script>
jQuery(document).ready(function($) {
$('#SWAP').cycle({ fx: 'fadeZoom'});

<script type="text/javascript">
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
    var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
    if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
    d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
   if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
</script>
</head>
<body>
<div class="container">
<div class="header"><object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="1024" height="133" id="FlashID" title="Lunaire Collective with moon animation">
    <param name="movie" value="lunaire_banner.swf">
    <param name="quality" value="high">
    <param name="wmode" value="opaque">
    <param name="swfversion" value="7.0.70.0">
    
    
    <object type="application/x-shockwave-flash" data="lunaire_banner.swf" width="1024" height="133">
      
      <param name="quality" value="high">
      <param name="wmode" value="opaque">
      <param name="swfversion" value="7.0.70.0">
      <param name="expressinstall" value="Scripts/expressInstall.swf">
      
    </object>
    
</object>
</div>
<div class="nav">
<ul>
<li><a href="index.html">HOME</a></li>
<li><a href="about_us.html">ABOUT US</a></li>
<li><a href="concerts.html">CONCERTS</a></li>
<li><a href="news.html">GALLERY</a></li>
<li><a href="composers.html">COMPOSERS</a></li>
<li><a href="contact_us.html">CONTACT US</a></li>
</ul>
</div>

<div class="sidebar1">
</div>

<div class="content" id="SWAP">
   <img src="slideshow/slide00.jpg" width="600" height="338" alt="The Lunaire Collective members"/>
   <img src="slideshow/slide01.jpg" width="600" height="338" alt="Lunaire in the recording studio"/>
   <img src="slideshow/slide02.jpg" width="600" height="338" alt="Lunaire in quartet form"/>
   <img src="slideshow/slide03.jpg" width="600" height="338" alt="Lunaire in duo form"/>
   <img src="slideshow/slide04.jpg" width="600" height="338" alt="Lunaire in quartet form"/>
   <img src="slideshow/slide05.jpg" width="600" height="338" alt="Lunaire at Tyalgum festival 2014"/>
   <img src="slideshow/slide06.jpg" width="600" height="338" alt="Lunaire with Hartley Newman"/>   
</div>

<div class="sidebar2">
    <h2>UPCOMING CONCERTS</h2>
    <p><a href="concerts.html">Wed 25 Mar 1:05pm<br>
      Classic Wind<br>
      Quintets<br>
      at QCGU</a></p>
    <p><a href="concerts.html">Wed 3 Jun 6:00pm<br>
      Romantic<br>
      Revue<br>
      at QCGU</a></p>
    <p><a href="concerts.html">Wed 10 June 6:00pm<br>
    Winds at<br>
    Twilight<br>
    Toowoomba</a></p>
    <p><a href="concerts.html">Sat 11-13 Sept <br>
Tyalgum Music<br>
Festival</a></p>
    <p><a href="concerts.html">Wed 14 Oct 6:00pm<br>Carter<br>at QCGU</a></p>
</div>
<div class="footer">
<div class="footer2">
<p><a href="index.html"><img src="graphics/lunaire_logo_transparent_no_outline.jpg" alt="Lunaire Collective Logo" width="171" height="97" class="fltlft"></a><a href="http://www.griffith.edu.au/music/queensland-conservatorium" target="_blank"><img src="graphics/Griffith-logo-colour.png" alt="Griffith University Logo" width="236" height="63" class="fltrt"></a></p>
</div>
<div class="footer3"><p class="italics">© 2013 Lunaire Collective. All rights reserved.</p>
<p class="italics"><a href="http://www.web.prohasky.com.au" target="_blank">Web design by Glenn Prohasky</a></p>
</div>
</div>
</div>
<script type="text/javascript">
swfobject.registerObject("FlashID");
</script>
</body>
</html>

Change this -
<script type="text/javascript" src="js/jquery-1.7.2.min.js"></script>
<script type="text/javascript" src="js/jquery.cycle.all.js"></script>
jQuery(document).ready(function($) {
$('#SWAP').cycle({ fx: 'fadeZoom'});
To this -
<script type="text/javascript" src="js/jquery-1.7.2.min.js"></script>
<script type="text/javascript" src="js/jquery.cycle.all.js"></script>
<script>
jQuery(document).ready(function($) {
$('#SWAP').cycle({ fx: 'fadeZoom'});
</script>
Assuming everything else is in the right place, that should do the trick. But here's a suggestion - put the two external links ABOVE the editable region in the template. That way, all files will link to those two jquery files (it won't matter since they are cached locally) and then all you'd need to put into the editable region would be the embedded script -
<script>
jQuery(document).ready(function($) {
$('#SWAP').cycle({ fx: 'fadeZoom'});
</script>

Dymanic action with jQuery selector not working in version 4.2.2

Hi,
We’re in the process upgrading to APEX version 4.2.2. We have an issue is with a report with a link that’s firing a dynamic action with a jQuery selector.
The first sequence in the dynamic action is Confirm. When we click the link in the report it’s supposed to popup a confirm “Are you sure you want to save?"
When we click the link nothing happens. This works in our current version 4.0.1, but not in 4.2.2. Do you have any ideas?
Thanks,
Joe

change the
in the url to
javascript:void(0);
The reason for your issue is that the default action of the anchor tag is not prevented and thus navigation occurs. A confirm action will return true or false, and execution of further true actions will stop when selecting cancel but this will still not prevent the default action from occuring. Similarly a cancel event true action is not adequete as this has to be run after the confirm so not accounting for the execution-stopping cancel of the confirm.
That javascript in the url is some good ol' "hack". It'll run that javascript instead of performing a navigation and void(0) just does nothing, and the click dynamic action will be unaffected.

JQuery Puzzler

Similar Messages

Maybe you are looking for