JRE 1.6.0_26 shows grant pop-up dialog even when usePolicy is in effect

I am testing JRE 1.6.0_26 (6u26 if you will) with our java.policy. Our policy starts with:
grant { permission java.lang.RuntimePermission "usePolicy"; };
and then adds specific grants for our internal java applets. With older JRE versions, this would suppress the pop-up dialog to ask the user to grant permission to signed and untrusted applets. This behavior is explained at http://java.sun.com/developer/technicalArticles/Security/applets/
With JRE 1.6.0_26 the dialog is shown, but pressing "cancel" or "run" gives the same result: the java.policy is used, not the user's decision.
Is this a bug in JRE 1.6.0_26 ?
I can still suppress the dialog by setting
deployment.security.askgrantdialog.show=false
in the the user's deployment.properties file. Is there a global way to set this property for all user?

After some more digging, here is the bug ID: http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=7047909

Similar Messages

  • I had switches off my iPhone 5 at around 20 percent battery next morning I was not able to switch it on. I tried to get it charged but it didn't showed any sign of charging even when plugged in for about 2 hours. I had to take it to apple care centre

    I had switches off my iPhone 5 at around 20 percent battery next morning I was not able to switch it on. I tried to get it charged but it didn't showed any sign of charging even when plugged in for about 2 hours. I had to take it to apple care centre but they refused to repair it after confirming the problem with the device as it was out of warranty and asked me to get it replaced for INR 22500. I got it repaired outside but after that also if I switch it off in the same situation it again happens and I have to take it for repair it has happened 3 times after that. Is it a inherent problem in iPhone that it uses battery even when switched off and if in that case battery drain out then refuse to get charged because this is the scenario i have experienced every time?

    Apple told you it was unrepairable.... You had it serviced by an unauthorized party. It's now no longer eligible for out of warranty replacement by Apple.
    There's really nothing else we can say about it. Find a competent 3rd party repair shop or buy a new one.

  • My traffic conditions dont show up on the notification even when it is turned on - ios 8

    my traffic conditions dont show up on the notification even when it is turned on - ios 8
    I have tried hard resetting. I had a similar problem with the weather but got that resolved now. Any ideas on how to fix?
    Thanks

    I'm having the same problem on my iPhone 5s. Traffic conditions are not even a option under edit, but weirdly my wifi iPad Mini Retina shows traffic conditions. I feel like I'm missing some option, but I can't figure out what it could be.

  • When i place my photo, the adjustments tab does not pop up, and even when i click image at the top, I cannot select any adjustments-brightness/contrast,hue-saturation, color blance, etc..Anyone know what I am doing wrong?

    When i place my photo, the adjustments tab does not pop up, and even when i click image at the top, I cannot select any adjustments-brightness/contrast,hue-saturation, color blance, etc..Anyone know what I am doing wrong?

    Good day!
    What is "place" supposed to mean – open, place as Smart Object, …?
    What are the image’s Color Mode and bit depth?
    Could you please post a screenshot with the pertinent Panels visible?
    Does Window > Adjustments not raise the Adjustments Panel?
    Regards,
    Pfaffenbichler

  • Whenever i open itunes on my iphone it shows "Cannot connect to iTunes" even when my internet connection is fine.

    Whenever i open itunes on my iphone it shows "Cannot connect to iTunes" even when my internet connection is fine.

    Try restarting the iPhone.
    If that doesn't do it, one thing that others have done to fix this is manually set the date and time a few months out  (Settings > General > Date & Time), test it again, and then set it back to the correct time.
    You can also take a look at this Apple doc for other ideas -> Can't connect to the iTunes Store

  • JRE Still showing 1.4.2_04-b05 even when JAVA_HOME is pointing jdk1.5.0_08

    I hae installed 2 versions of java 1.4.2_04-b05 and jdk1.5.0_08. Can I make current JRE to be 1.5.0_08 without uninstalling the previous version ?
    Can anybody please help me out?
    I tried changing the JAVA_HOME to the version jdk1.5.0_08 but it's still showing the version 1.4.2_04-b05 of JRE in use
    C:\>java -version
    java version "1.4.2_04"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_04-b05)
    Java HotSpot(TM) Client VM (build 1.4.2_04-b05, mixed mode)Thanks in advance
    Uday

    C:\source\java\ebanx\build\dev-sme>java -version
    java version "1.4.2_10"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_10-b03)
    Java HotSpot(TM) Client VM (build 1.4.2_10-b03, mixed mode)
    C:\source\java\ebanx\build\dev-sme>java15 -version
    C:\source\java\ebanx\build\dev-sme>C:\langs\java\jdk1.5.0\bin\java -version
    java version "1.5.0_06"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_06-b05)
    Java HotSpot(TM) Client VM (build 1.5.0_06-b05, mixed mode)

  • Turned off my iPhone and when it turned back on some settings were changed, why? Also, album art work not showing up on my iPhone even when it shows up in iTunes

    I turned off my phone using the home key and the top button (an apple customer service personnell told me to do this if it started to act up) and when i turned it back on some of my settings were changed.  I don't remember how everything was set up, so now I have to try and go searching for things that are wrong. Also, my iMessage and FaceTime accounts said that they aren't verified...they were before i turned my phone off.
    Another thing is, is that the album artwork isn't showing up on my iphone, but its in the "get info" section on itunes. AND many times the artwork isn't showing up on itunes...like songs purchased from itunes. This is extremely aggravating. Can someone please please please help me?!

    Hi Shelley1284,
    If you are having issues restoring your iPhone, you may find the following article helpful:
    Apple Support: If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Regards,
    - Brenden

  • Contact name not showing in call/sms log even when I call/sms from my address book.

    Two things have changed on my phone recently.
    1. I ran the latest update 4.3.2
    2. My phone was not showing all the contacts in my address book that is in my Mobile Me account. Mobile me had 166 contacts. The iPhone 4 had 136. I I unchecked the syncing of my contacts on my phone. This removed all the contacts from my phone. Then I check the syncing options again. All 166 appeared on the phone.
    I'm not sure which of the two caused the issue but now anytime someone who calls their name does not appear on the display or log, just their number. I can even call people from my address book and the display shows that I am calling them with their name and photo on display. However, in the call log the name does not show just their number.  This applies for text messages. I send a message directly from within the contact card in the address book and in my text log it shows only the number and not the name.
    I've turned the phone off and on a couple of times.
    I would appreciate any advice.
    Cheers

    Thanks iraghib,
    In the end I reset my phone to factory settings. I created a back up of my address book and ical. Reset the phone and did a sync again. This fixed it all. I didn't need to use the backups but is was nice to know they were there. I felt entering the various passwords for all my installed apps was a much better deal than adding the international area code to the 166 contacts I have in my address book.
    Good luck. And thanks for the post.

  • IPod Showing Up As Removable Disk Even When Disk Use is Disabled

    Hi there,
    I'm having a problem with my iPod and Vista. My iPod is showing up as a removable disk even though I do not have "Enable Disk Use" checked. This is confirmed by the fact that I can disconnect my iPod without having to eject it first.
    I've tried checking and unchecking the text box. It works the first time, but when I reconnect the iPod, the disk shows up again.
    How can I permanently disable disk use?
    Appreciate any help you can give.

    Have you tried performing a RESTORE on the iPod when connected to iTunes?
    Patrick

  • All my downloads show insignia of internet explorer even when downloaded in firefox,WHY?

    i only use mozilla firefox. Everything i download in firefox, shows the logo of internet explorer and not mozilla firefox. why so? how do i overcome this.

    You may have to set another browser temporarily as the default browser to make Firefox "redo" the default browser settings.

  • Contacts showing Name and Company Name, even when 'file as' is the name only

    We are running into a strange issue someone may provide some light on, I've researched quite a bit online with no success, and may soon be calling Microsoft on this one. Sometime earlier this year we installed Exchange 2010 Update rollup 4, then UR5, after
    that when you create new contacts in outlook 2010, no matter how you choose to 'file as', when you pull up the contact in the address book it always contains the company name after the persons name. It doesn't seem to matter how you file the contact, it always
    appears with the company name in the name field in the address book (and therefore pulls that into any mail merge).
    anyone else run into this issue or know how to fix it? I included screenshots below....
    thanks for your help all.
    here is the contact in address book, showing company name no matter how its filed.

    Hi,
    I can reproduce the same issue here. Here is what I did to fix this:
    1. Open a problematic contact.
    2. In the Full Name field, type a space and then click Save & Close button.
    3. Now, go to Address Book, you will find that the company name is removed.
    Based on my deep research, I find a macro can be used to update the Full Name info, when I run the macro, the company name is removed from all problematic contacts in Address Book. See the code sample:
    Sub UpdateContactFullName()
    Dim FileAsFormat As String
    Dim CurrentFolder As Outlook.Folder
    Dim objItem As Object
    Dim objItems As Object
    Dim objContact As Outlook.ContactItem
    Set CurrentFolder = Application.ActiveExplorer.CurrentFolder
    If CurrentFolder.DefaultItemType = Outlook.olContactItem Then
    Result = MsgBox("Update the Full Name field for all " & _
    "your contacts according to your default " & _
    "Full Name settings in Outlook?", _
    vbQuestion + vbYesNo, "Update Full Name field")
    If Result = vbYes Then
    Set objItems = CurrentFolder.Items
    For Each objItem In objItems
    If objItem.Class = Outlook.olContact Then
    Set objContact = objItem
    'We need to touch something in one of the name
    'field to force a rewrite of the Full Name field
    'according to the default Full Name settings.
    objContact.FirstName = objContact.FirstName
    objContact.Save
    End If
    Next
    Result = MsgBox("Finished updating the Full Name format of all contacts." _
    , vbInformation, "Done!")
    End If
    Else
    Result = MsgBox("Please select a Contacts folder." _
    , vbCritical, "Select Contacts folder")
    End If
    Set CurrentFolder = Nothing
    Set objContact = Nothing
    End Sub
    Reference link:
    http://www.howto-outlook.com/howto/contactnameformat.htm
    Hope this helps.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • "Removable Disk" shows up in Windows 7 even when USB Flash drive isn't there

    I have a new windoz 7 computer, a couple of new sandisk cruzer 16bg flash drives. I removed the flash drives a couple of times without doing the "eject" thing. I never had a problem with your flashdrives on my xp machines. I know I was a bad boy, I just pulled the usb flash drive out. When I go to my computer folder it shows me my hard drives and its shows 5 Devices with Removable Storage ....one of which is the DVD RW Drive and 4 Removable Disk  which are or were times when I plugged in my usb flash drive. They show 0 bytes, nothing is in any of the "Removable Disk" instances and I cannot remove them. I tried to delete, cut and I tried to eject but the Removable Disk icon stays there. How can I get rid of these safely, I tried rebooting a couple of times, they show up even without any usb devices plugged in. Thanks in advance Scott

    I had this same problem.  It turns out to be easy to resolve:Open the Windows 7 "Start" Menu,  on the right shoose computer, in the new window that opens choose System Properties from the choices across the top of the window, now on the left side of the window choose Device Manager.  In Device Manager expand the "Disk Drives" entry.  You should see a listing of your hard disk drives and you'll also see "removable disk drives" with some additional idnetifying information.  Select the offending entry and then right click and select "Uninstall" click "Okay" and the entry will be gone.  Just be sure you're not uninstalling one of your hard disks.  That's all there is to it. To prevent this issue in the future always "eject" the SD drives/sticks before you remove them. I hope this helps.

  • The request for me to enter my master password keeps popping up constantly, even when I don't need a password.

    There aren't many details other than that. As long as I am using firefox, the request for my master password just appears over and over.

    I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
    The old email address no longer exists - I haven't used it in a year probably and I no longer have the account.  I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there.  On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back.  Every 2 seconds I am asked to log in using the old non-existent email.  The device is currently useless.
    The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
    Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

  • Resource still showing Product in Capacity view even when the PDS is deleted

    Hello,
    I have a Material which had 2 PDSes sometime back. PDS1 has Resource1 and PDS2 has Resource 2. Some time back PDS2 was deleted(version also deleted from ECC). So, now the Material has only one source of Supply PDS1(with Resource 1). There are no open orders of the past which were on PDS2 or say, resource 2. So basically Resource 2 should now have no connection with Material.
    However, when I load Resource 2 in Capacity View and drill down at Product Level, I can still see the said Material in the list with other materials(for which Resource 2 is still valid). Not sure why the Material would now appear there. Also, when i try to create any order for this material in Capacity view for resource 2, it says- No valid PDS/PPM available-which is fine, but why would the material appear there in the first place?
    This is happening for many other materials as well.
    Any suggestions?
    Thanks,
    Kunal

    Hi Cyrille..
    Thanks for the reply! You are bang on..
    The only catch here is that we do have a cons check program running every day which was not correcting the issue..but when i ran it manually, the issue got corrected automatically....
    The only difference between the job run manually and the one running daily in background is that the background run has parallel processing profile assigned to it while i ran it manually without any PPP..
    I guess PPP is the reason it was not happening
    Thanks,
    Kunal

  • Pop-up dialog box when using SPROXY t.code in ECC 6.0

    Hi
       I have a ECC 5.0 that I am trying to connect to my XI 7.0 box for development.
       When I use transaction code SPROXY in my ECC 6.0 box - I get a dialog box titled 'Enter your username and id' - with a subtitle - Resource   Rep  and asking me for userid and password
    My SLDCHECK works fine with accesses to SLD and exchange file of my XI box from ECC 6.0. I don't have any RFC destination like ESR*PROXY . My RFC destination LCRSAPRFC tests ok.
    Why am I still get this popup ? When I try executing SPROX_CHECK_IFR_ADDRESS - I get the same popup dialog box .
    Correct answers will be instantly rewarded. I am really looking forward to help for this critical problem.

    Go to SXMB_ADM-->IntegrationServer Configuration in ECC . There find the value for Related Integration Server. It will be some thing like dest://<RFCdestination name>. Note this destination name and test this destination in SM59.
    >>Correct answers will be instantly rewarded.
    BTW, I am not here for points and it is violating the Rules of Agreement to make such statements in forums.

Maybe you are looking for