JRE 7 Patch-in-Place Configuration not working as documented

According to all of the documentation I have read, the default JRE installation mode is patch-in-place.
http://docs.oracle.com/javase/7/docs/webnotes/install/windows/jre-installer-options.html
http://www.oracle.com/technetwork/java/javase/jre-install-137694.html
http://docs.oracle.com/javase/7/docs/webnotes/install/windows/patch-in-place-and-static-jre-installation.html
However, after either manually installing JRE 7 to a specific installation directory (e.g. not on C:), or by specyfying the the INSTALLDIR on the command line, a subsequent JRE 7 update will uninstall the previous JRE from the desired installation location and install the current JRE in the default location (i.e. C:\Program Files\Java\jre7).
Is there some magic installer switch, registry entry, configuration file, etc. that will force the JRE installer to upgrade the existing installation in its existing location?
Note - these are not static instllations. Also, I am working with the 64-bit version; I don't know if the same applies to the 32-bit version, as I have not tested it because I require the 64-bit version.
-Jeff

At this site there is an explanation of this issue: probably LabVIEW don't support partial scrolling.
If I understood what they write, in Intellimouse 8.0 and above, Microsoft implemented a kind of patch for applications that don't support partial scrolling.
And so without Intellimouse, none of these applications supports partial scrolling.
I'll try to install the latest version of Intellimouse, but I think NI developers should patch LabVIEW to support partial scrolling. On the same site MS gives a link to the MSDN information dedicated to developers on how to handle partial scrolling.
Vix
In claris non fit interpretatio
Using LV 2013 SP1 on Win 7 64bit
Using LV 8.2.1 on WinXP SP3
Using CVI 2012 SP1 on Win 7 64bit, WinXP and WinXP Embedded
Using CVI 6.0 on Win2k, WinXP and WinXP Embedded

Similar Messages

Alert configuration Not working in RWB

Hi,
In RWB alertconfiguration is not working, showing the error
<b>404 Not Found</b>". I gone through this thread
Alert configuration or Alert Inbox-----404 Not Found
And my host name is full host name.
In exchange profiles my port is 50100 (J2EE PORT) (Not Changed)
1. In SMICM when I changed to port to 50100 (J2EE) then alert configuration
working, But My scenarios not working throwing error : System Error.
<b>Error Category XI_J2EE_MESSAGING_SYSTEM
Error Code HTTP_TRANSMISSION_ERROR</b>
2. In SMICM when I changed to port to 8001 (ABAP Port) then Alert configuration not working (Error : 404 Not Found), but my scenarios were working fine.
what would be the reason?
thx in advance,
Ansar.

HI,
If Error: 404 Not Found
Description: The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
Possible Tips:- for HTTP_RESP_STATUS_CODE_NOT_OK 404
404 is an HTTP response code that indicates that the resource in question couldn't be found. Usually this is due to an incorrect URL, so it is better to cross check all URLs.
Check pipeline URL in the SLD in the business system of the Integration Server For this go to SLD->Business System-><yourIntegrtaion Server>->Pipeline URL: It should be like this http://<host>:<port>/sap/xi/engine?type=entry Where host is the host name of the Integration Server and port is the HTTP(8xxx) port. To verify this in Integration Server you can do like this. Go to SXMB_ADM->Integration Engine Configuration->Choose Edit from Menu -> Change Global Configuration Data to switch to change mode. Then select System Landscape - Load Configuration. (This is not required always)
Check that the port really is the ICM HTTP Port and not the J2EE port i.e SMICM then menu GOTO --> SERVICES and check the port number for HTTP. It should be HTTP port
If the error is Page cannot be displayed, cannot find server in https configurations Check and correct the SSL configuration for the ABAP and the J2EE side of the system
If the error is because of integration server when using Proxy communications then check these. i.e SXMB_ADM->Integration Engine Configuration->Corresponding Integration Server enrty should be dest://<Http Integration server-Destination> Where < Http Integration server -Destination > is the RFC destination (SM59) of type HTTP connection (type H) to the Integration Server. In this case, host name, port, and path prefix are saved in the RFC destination
Also see the below links
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/content.htm
Regards
Chilla

HT201412 Safari could not open the page because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work. Can you please help me. I've tried everything. Thanks ya'll!

Safari could not open the page on my new ipad mini's because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work fine. Yesterday I got it to work. Weird. Can you please help me. I've tried everything. Thanks ya'll!

Hello SavannahSweetie,
I was looking into the issue you are desribing, and found a great article for troubleshooting wifi connections with iOS devices. It's called iOS: Troubleshooting Wi-Fi networks and connections and can be found here: http://support.apple.com/kb/ts1398.
Start with this section, and work your way down if needed.
Basic troubleshooting
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.
Verify that you are in range of your Wi-Fi router or base station.
Confirm that your Wi-Fi router and Cable/DSL modem are connected to power and turned on.
Check whether other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Update your Wi-Fi router to the latest firmware.For AirPort Base Stations, refer to this article for information about firmware updates. For third-party Wi-Fi routers, check the manufacturer's website for details on updating your firmware.
Restart your iOS deviceHold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
All the best,
Sterling

Jre-setup.exe /L 1036 does not work

I tried to use "jre-setup.exe /L 1036" to let the installer displayed in French. However, it did not work. I am using Windows XP and the locale is English (Canada).
The installer only displayed in French when i change the locale to French on the PC.
Isn't the command " /L 1036" supposed to let installer displayed in French regardless what the locale of the pc is set to?
Thanks in advance.

I think some developers really got some wrong concepts here...
I have a English version of windows, but my locale set to Chinese for some of the programs I use. This does not mean that I want Java or any of my other programs in Chinese, and I certainly do not want the calendar to be. Recently I installed OpenProj and found a lot of parts including the calendar on the Gant Chart were in Chinese due to JRE taking my system's locale settings. This is all still ok, except for the fact that there is no way to change the language setting. Suggested solution by Sun is to just change the system locale in windows. This is of course not acceptable. Correct solution should be: JRE gets the default setting from the system, but is able to override it with an option.
For those of you who face the same, here is a quick patch which hardcodes the locale instead of getting is from the system:
-This has been done on File version 6.0.50.13 of Java.dll
-Close all programs using Java
-Open a hex editor and open "Java.dll" in "program files/Java/bin" or whereever you installed Java, and go to offset 0x6BD0 (if you have a different version of Java.dll), you can very likely still do a search for the hex values below and find the correct place)
-You will see following values: FF 15 A0 10 32 6D 8B F8 FF 15 A4 10 32 6D 57 89
-Change them to: 68 09 04 00 00 58 8B F8 68 09 04 00 00 58 57 89
^ ^ ^ ^
-You can change the values indicated with ^ to the locale you want JRE to take, please check the link below for all locales.
http://msdn2.microsoft.com/en-us/library/ms776260(VS.85).aspx
Remember to swap the bytes in the values above ie: 0x0409 (en) -> 0x0904.

Component and Application Configuration not working

Dear Friends,
I want to disable the reject button in HCM Processes and Forms Webdynpro component HRASR00_PROCESS_EXECUTE and in application asr_process_execute only for some specific roles in Portal. So I tried to use the component configuration followed by the application configuration and passed this configuration id as a application parameter in the Portal, but its not working.Please find below the config steps which I did, let me know if I am missing anything.
1. Created a new Component configuration ZTEST for the Webdynpro component HRASR00_PROCESS_EXECUTE and changed the property of the Reject button to "Invisible".
2. Created a new Application configuration ZTEST1 for the Webdynpro application ASR_PROCESS_EXECUTE and included the component configuration in the application configuration.
3. Created an Application Parameter WDCONFIGURATIONID for the Webdynpro application ASR_PROCESS_EXECUTE and hard coded its value as ZTEST1(Application configuration ID) for testing purpose.
4. Tried to test the application from Portal, but didn't work. I don't think the UWL customization is required at this point as we have hardcoded the WDCONFIGURATIONID in the Webdynpro Application.
Regards,
Sapient

Hi,
We had a same issue....the work around we got was that we had to create an enhancement...we removed the standard button...and created our custom button in place of the standard button....of course...the action method for our custom button was the same as the standard button....now since it is a custom button we were able to control the visibility of it....
you can try to do it the same way....there is no coding involve in this...only removing the standard button and placing in your own button....SAP does not allow changing the properties of the standard ui elements.....just want to mention that by removing the standard button...you are not actually removing the button....it stays on the layout....but it will not show up when you run the application....but your own custom button will show up....
If you do not know the procedure of removing the standard ui...it is fairly easy...right click on the ui element under the ROOTUIELEMENTCONTAINER...and select remove element....as i said before do not worry you are not removing it completely...it stays on the layout...and if you want to put it back...just right click on it again and select "undo deletion"....that is all
once you have your custom button there...you can control it the way you want...depending on the role....
Thanks..
AS...

Dynamic configuration not working in Java mapping

Hi All,
I have a scenario where i am using java mapping. In this i am doing following
1)Read file name from input message header
2)set file name in output message Header
3) set Directory name in output message Header
i have used following code .. but iit is not working... when i test end to end... in reciver communication channel it is failing stating " message failed as "Directory is not set in Header. Also i checked in SXMB_MONI "dynamic configuration".It is not showing Directory.
this is code.
public void transform(TransformationInput transformationInput,TransformationOutput transformationOutput)
               throws StreamTransformationException {
               private Map para;
               String Directory ;
               String inputFileName;
               String var1 = "ABC";
               para = transformationInput.getInputHeader().getAll();
               DynamicConfiguration conf = (DynamicConfiguration) para
                         .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
               DynamicConfigurationKey keyFileName1 = DynamicConfigurationKey
               .create("http://sap.com/xi/XI/System/File", "FileName");
                     inputFileName = conf.get(keyFileName1);
               DynamicConfigurationKey keyFilename = DynamicConfigurationKey
                         .create("http://sap.com/xi/XI/System/File", "FileName");
               DynamicConfigurationKey keyDirecory = DynamicConfigurationKey
                         .create("http://sap.com/xi/XI/System/File", "Directory");
               Directory = "tmp/"+var1;
               conf.put(keyFilename,inputFileName);
               conf.put(keyDirecory, Directory);
I am in PI 7.1 ,   and in eclipse its showing warning that Para is not used.
Can anyone show some lights.
Also is there any way to debug this?? like is there any function by which i can write the trace for each step to see those in MONI.

Method name:   public void createDirectory(Resultlist result, Container container)throws StreamTransformationException
//Use Simple UDF and do the following lines
String Directory ;
String inputFileName;
String var1 = "ABC";
DynamicConfiguration conf = container
    .getTransformationParameters()
    .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey keyFileName1 = DynamicConfigurationKey
               .create("http://sap.com/xi/XI/System/File", "FileName");
inputFileName = conf.get(keyFileName1);
DynamicConfigurationKey keyFilename = DynamicConfigurationKey
               .create("http://sap.com/xi/XI/System/File", "FileName");
DynamicConfigurationKey keyDirecory = DynamicConfigurationKey
               .create("http://sap.com/xi/XI/System/File", "Directory");
Directory = "tmp/"+var1;
conf.put(keyFilename,inputFileName);
conf.put(keyDirecory, Directory);
and remove these 3 lines
//private Map para;
//para = transformationInput.getInputHeader().getAll();
//DynamicConfiguration conf = (DynamicConfiguration) para.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION
>>I am in PI 7.1 , and in eclipse its showing warning that Para is not used.Can anyone show some lights.
You can simply remove declaring Map Para line... The eclipse gives warning because you dont assign values for it and you are trying to use...
For using the same input file name in output side, you dont need coding ... you need only for the directory...
Enable ASMA attributes in the channel.
Edited by: Baskar Gopal on Feb 24, 2011 10:58 AM

Dynamic Configuration not working with Integrated Configuration

Hi All,
Dynamic Configuration works fine in PI 7.3 when Classical Configuration is used. However the same does not work using Integrated Configuration.
Scenario :
SOAP -->SOAP Synchronous scenario in PI 7.3 (Dual Stack).
Trying to save a value from Request mapping using dynamic configuration and use the same in response mapping.
UDF Code :
Request Mapping :
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey Variable = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP", "Variable1");
conf.put(Variable, a);
Response Mapping :
DynamicConfigurationKey Variable = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP", "Variable1" );
string1 = conf.get(Variant);
Note : Using Integrated Config(AAE Processing) - Response header does not have DynamicConfiguration header node , but Classical Configuration has that.
Regards,
Parimala
Edited by: ParimalaE on Mar 1, 2012 1:33 PM

For us this is what we had:
This didn't work (getInputParameters is the newer stuff that doesn't work):
DynamicConfiguration dc = (DynamicConfiguration)container.getInputParameters().getValue(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey dck = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP","TServerLocation");
dc.put(dck,"https://xyz.api-salesforce.com/services/Soap/c/26.0/0DFa00000008jis");
return "";
This works for us(we had to remove getInputParameters):
DynamicConfiguration dc = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey dck = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP","TServerLocation");
dc.put(dck,"https://xyz.api-salesforce.com/services/Soap/c/26.0/00D3000000001X0");
return "";

Paste in Place shortcut not working

My Paste in Place shortcut (cmd+shift+v) is not working in Adobe Illustrator CC (Updated) for Mac OS X.
It works when I manually press the command in the edit menu, but not when I use the keystrokes
When the shortcut is initiated, the software behaves as if nothing was pressed
It is showing as the proper shortcut when I view my shortcut preferences
When I try to re-type the shortcut in the preferences, it acts as if nothing was pressed
I've tried uninstalling SubScribe Plug-in
I've tried uninstalling Illustrator and then downloading again
I've tried resetting Illustrator preferences
I'm using the Apple Wireless Keyboard
I've tried using another keyboard and that didn't work either
Please help me, this is affecting workflow

jwbrobst,
What about Cmd+V for Paste (centre of the view), Cmd+F (place in front in the same place), or Cmd+B (place in back in the same place)?
Have you actually selected an object to paste?
Did you reinstall using the full three step way?
Uninstall (ticking the box to delete the preferences), run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Local client copy profile SAP_CUSV: Configuration not working

Dear Experts,
My configuration client is 350 and my new client is 100 in same DEV system. Client 100 is copied from client 000 with profile SAP_ALL. Then I created a local copy from 350 using profile SAP_CUSV into same client 100. After that I am facing issues under HCM module. All the HCM configuration that works well in 350 does not work in client 100 even the standard header configuration of PA30 does not work. All the customizing entries are however present in HCM configuration tables but system seems not to read anything from HCM configuration. Apart from screen headers, the configuration done by consultant also has conflicts and system shows an error to maintain entries in tables which are already maintained and visible in configuration tables in 100. An example of error in which system gives error of maintaining Payscale Type and Payscale Area in table T510 is attached where as the entries are maintained in given table.
Best Regards,

Hi,
Please check the following notes.
1946003 - Client copy completed with Dictionary error
1171306 - Error with pooled tables when copying a client
686357 - Table pool has incorrect length following Unicode conversion
Please close the thread if this address your issues.
Thanks
Adil

Shared services db configuration not working in fusion

Hi,
I am trying to install v11. The problem is that the configuration of the db for HSS is not working correctly. The application server is deployed, the openldap service is up and EAS is fine but HSS isn't. Obviously nothing is registering with HSS. When I choose only to figure the db for hss there is no screen to enter the details. It goes straight to configure and then says its done. However, it is still listed as an outstanding task not as a failure. I tried deleting the db I had for hss and recreating it but this made no difference. I have read some docs but the screen I need is not coming up. I believe it did once though when I first went to install fusion.
Any ideas?
Thanks,

Actually when I installed version 9, I never got around to configuring shared services and so never had a shared services database in SQL Server to begin with.
One question about the registry entry you told me to delete: The (HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions) which currently exists would be the entry for version 11 which I have installed right? It's the only entry for Hyperion Solutions in the registry.
After uninstalling versino 9, C:/hyperion still existed on my machine (though it didnt have all the subfolders which it did prior to uninstalling), so I manually deleted it before installing verison 11.
I wouldn't mind installing it on a compatible version of windows, but the thing is that at this point this is all that is available to me.
and I don't have any other oracle products.
thanks....

Sidebar Places Folders NOT working as a Smart Folder

I have three sidebar Places Folders that I originally made, but now they do not work as an expected Smart Folder. The additional problem is I cannot remove these sidebar folders by simply dragging them OFF the side bar. If I right click on these three problem sidebar folders I am only allowed to "Open Sidebar Preferences" and further more the sidebar folder cannot be highlighted. What can I do to remove these folders from the sidebar?

I wanted to know how to remover folders that were not smart folders. Your reply to Isjessop on May 10
provided the right answer. Thanks pal.

SPA122, "Restore Configuration" not working.

Hi,
I can't restore .cfg files on the Config Management menu. The "browse" button
is not active and i can't load a file. The firmware version is 1.3.1. Tested with Firefox, Opera, Google Chrome
Internet Explorer (old V6), same results. I haven't got problems with firmware upgrade or backup configuration menu.
Using Windows XP...
Thanks. (sorry for my poor english)

Well, i saved my configuration with the config manager, do one RESET with the phone (73738#). Logon on the PC with 192.168.15.1 (Yellow LAN port). And the restore configuration is active! But when i restore my .cfg file the SPA122 don't work well. The VoIP line is working but the PC connected to the yellow LAN does not work, can't get IP address (0.0.0.0).
(I reboot PC, SPA and router,same thing).
To reproduce the bug simply put the SPA in Bridge mode in Network service.
My SPA is in bridge mode and got one PC on the yellow LAN port. The SPA122 and the PC got static IP address from the ADSL router in DHCP. SPA -> 192.168.1.70 and the PC -> 192.168.1.64.

SQL Developer 1.1 Patch 3 still does not work on 64-bit Windows

There has been a long-standing problem with SQL Developer 1.1 not working on 64-bit versions of Windows. When sqldeveloper.exe is executed, a very unhelpful error dialog stating "The application failed to initialize properly (0xc00000018). Click on OK to terminate the application" is displayed.
While there is a workaround that involves running the sqldeveloper.bat file in the \sqldeveloper\bin subdirectory, it is a bit inconvenient and requires the user to discover this workaround. Furthermore, SQL Developer 1.0 did not have this problem, so it is a bit puzzling as to why the problem was introduced with SQL Developer 1.1 and why it is still not fixed with the latest patch.

I can confirm that we have a fix for this problem. I'm not sure when this fix will be available in SQL Developer.
The bug was introduced in 1.1 due to optimizations in the way that the native Windows launcher works to better support products like SQL Developer.
Thanks,
Brian

Aperture and Places does not work

Hi,
i have the newest Version of OSX Lion and of Aperture 3. The Places function does not work. All Buttons and functions which are assosciated with the function of GPS are grey. I have no possibility to push any Button that has something to do with GPS Information. The Map ist a little bit light and i cannot zoom in it. It also has noch Needles to show locations. If i import some Pictures with geoinformation, aperture do not show it on the map. Some ideas please! Thank you very much.
Tobi

Hey,
thanks for fast answering. Your Idea that there is no Internet connection was very good. Seem like to be, but isn't because I'm connected. Here are two Screenshots.

Illustrator CC 2014 open and place commands not working after installing Yosemite

How can I get Illustrator Open and Place commands to work after installing Yosemite?

Hello,
I also have the same problem, after 5 minutes I can't open or place anything in illustrator. I have this problem also in photoshop cc 2014. This started after installing Yosemite.
Tried to reinstall but nothing helps.
Today after updating creative cloud application it is even worse: illustrator is not opening anything: not even a new file. So I reinstalled... and I can open again for 5 minutes. But then it crashed while saving. Now I can't open illustrator at all...so nothing left to do then reinstalling again I suppose?

JRE 7 Patch-in-Place Configuration not working as documented

Similar Messages

Maybe you are looking for