JS CS2 Call out specific image in script

I've never had to do anything with images in scripting, and I'm unclear whether I need to use "links", "images", "graphics"...so I came here. For everything I've found here so far, people are dealing with all images in a document. I just want to perform an action on a specific image, not all. (example: "logo.eps")
I have the same image in each document twice - once on the left master page and once on the right master page. It's a logo, and we've just added the registered mark to it, so we need to update it on all of our documents. The new image is the same name, so I need to:
*Update both links to the image
*Fit frame to content to both (the (R) makes the logo wider)
*On the left-hand master page, 'fit frame to content' widens the frame to the right. I need the right edge of the logo to stay on the right margin
I don't want to "fit frame to content" for all images, because some frames for other images may have been purposely sized--I don't want those to change.
Suggestions? (Unfortunately, we're still on CS2)

Hi Loic,
Thanks! It seems like a good start. It's not exactly working, but I'll see if I can adjust it myself from here. (For example, it's only updating the logo on the left master page. The one on the right page is not updating.) If I can't, I'll be back...
Lisa

Similar Messages

How to figure out which albums contain a specific image?

Is there a way to click on a specific image and find out where else it is located (besides the master file location)? For example, let's say an image of your cousin is included in an album Birthdays and in another called Family. If I clicked on the master image, is there a way to see that it is included in the albums Birthdays and Family?
Thanks for your help!

The link to the script in the post you referenced is no longer valid.
This should work Aperture: Search albums for a specific image
I have it installed as an Aperture Service but it will work as a regular script.

Please help to call oracle procedure with out paramter from shell script

Hi
I want to call a process with out parameter from shell script. I am calling process in shell script in below way
function Process_loads {
( echo 'set serveroutput on size 1000000 arraysize 1'
echo "set pagesize 0 term on verify off feedback off echo off"
echo "BEGIN"
echo " dbms_output.put_line('Before Calling The package'); "
echo " x ( '$1', '$2', '$2', '$4', '$5', '$error_code'); "
echo " dbms_output.put_line('After Calling The package'); "
echo "EXCEPTION "
echo " WHEN OTHERS THEN "
echo " dbms_output.put_line('BIN_LOAD_ERROR' || SQLERRM); "
echo " ROLLBACK;"
echo "END;"
echo "/" ) | sqlplus -s $USER/$PASSWORD@$SID
Here $error_code is out paramter. All varaibles passed in process are declared with export command.
When executing .sh it gives below error
"sh ERROR at line 3: ORA-06550: line 3, column 99: PLS-00363: expression '' cannot be used as an assignment target ORA-06550: line 3, column 3: PL/SQL: Statement ignored".
Please help to get rid from this error or please suggest how to call a oracle procedure with out paramter from unix shell script.
Thanks in advance

You can try this:
From sql*plus
SQL> ed
1 create or replace procedure my_proc(p_id in int, p_result out int)
2 as
3 begin
4 select 10 * p_id
5 into p_result
6 from dual;
7* end my_proc;
SQL> /
Procedure created.
SQL> set serveroutput on
SQL> declare
2 v_r int;
3 begin
4 my_proc(10,v_r);
5 dbms_output.put_line(v_r);
6 end;
7 /
100
PL/SQL procedure successfully completed.
from bash:
testproc.sh:
#!/bin/bash
(echo 'set serveroutput on';
echo 'declare';
echo 'v_r int;';
echo 'begin';
echo 'my_proc(10,v_r);';
echo 'dbms_output.put_line(v_r);'
echo 'end;';
echo '/';) | sqlplus -s u1/u1
Console:
oracle@mob-ubuntu:~$ chmod u+x testproc.sh
oracle@mob-ubuntu:~$ ./testproc.sh
100
PL/SQL procedure successfully completed.With kind regards
Krystian Zieja

How do I display call out accessories with different images?

I need some help with an app I'm developing. I'm displaying a map with an array of annotations.
I have managed to display the map & annotations successfully.
What I want to do next is have call out accessories that display different images everytime they are tapped.
Can anyone help with this? I have managed to display a right call out accessory but I'm getting stuck here & I don't know how to get my code to display images.
Any help wil be greatly appreciated!

baltwo: Thanks for the tip, I didn't know how easy it was to set up custom icons in OS X. In this case it's a difficult solution because it will have to be done by hand for every single folder, which is a problem if I'm going to have these in two places. I'm new to Automator but there doesn't seem to be a way to have it; 1) Select all the folders in a directory. 2) Copy the first image in each folder to the clipboard and have it use that image as each folder's icon.
Barney-15E: I know it sounds moronic, but yes. I've tried iPhoto but it's not a very good solution in this case. My folder structure is like this:
Root -> 282 image folders with 10 to 60 pictures in each.
All I really need is the ability to see at a glance what each image folder has without opening each individual folder. The folders are numbered sequentially (1-282 in this case) rather than by proper names, so this is the most efficient way.

Cannot Call Out to Specific Phone Number

I am not able to call out to a specific phone number from the iPhone.
I am able to call this specific phone number from different sources. ie. Another cell phone, lan line, work, etc...
Any clues on why just a specific phone number cannot be made to?
When I try to call, I always get 2 beep sounds only and says the Call Ended.
I get no Dial tone when I call also.
ps.
It could be that somehow they blocked my cell phone number.
But, I do not believe so.
-JK

PlyHrd wrote:
The phone number I'm trying to call is from T-Mobile. (Could be the culprit!)
Aha! T-Mobile is so ticked at losing out to AT&T that they are blocking incoming calls from iPhones!

Video I call out in /body and /head is playing on every page

I have almost no experience when it comes to coldfusion however I am trying to add a video to a clients site. The clients site is http://www.pcalic.com/ I'm adding this to the Index.cfm however the issue is when I click on the links to get to the other pages, the videos also play on that page. I really only want the videos to play on the home page. Is there something I can write to prevent the other pages from grabbing that?
I'm calling out 2 things one is the video script which I place above the </body> tag.
The other is video player and the java script call out which i put above the </head> tag
any help would be appciated thanks!!!!

here is the source code. THANKS so much!!!
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<cfoutput>
<meta http-equiv="description" content="#page.pgs_description#" />
<meta http-equiv="keywords" content="#page.pgs_keywords#" />
<title>#page.pgs_title#</title>
<link type="text/css" rel="stylesheet" href="#request.sitePath#style/reset.css" />
<link type="text/css" rel="stylesheet" href="#request.sitePath#style/pcaliccom.css" />
</cfoutput>
<script src="http://www.snap2video.com/ext/flvplayer/jquery-1.4.2.min.js"></script><script src="http://www.snap2video.com/ext/flvplayer/donscroll.js"></script>
</head>
<body>
<cfoutput><img id="logo" src="#request.sitePath#images/framework/pcalic.png" width="751" height="276"/></cfoutput>
<div id="logoText">Personal Care & Assisted Living Insurance Center, LLC</div>
<div id="searchBar">
    <div class="left"></div>
    <div class="right"></div>
    <div class="mid">
        <cfform name="searchForm" id="searchForm" action="#request.sitePath##devLink#search">
            SEARCH
            <cfinput type="text" name="searchTerm" id="searchTerm" />
            <cfinput type="image" src="#request.sitePath#images/framework/searchbar-arrow.jpg" alt="Search" id="searchArrow" name="submit">
        </cfform>
<cfoutput>
        <a href="http://twitter.com/BrianBarrick" target="_blank"><img class="social16px" src="#request.sitePath#images/framework/searchbar-twitter.jpg" alt="PCALIC's Twitter" width="16" height="16" /></a>
        <a href="http://www.facebook.com/pages/PCALIC-LLC/98891296431" target="_blank"><img class="social16px" src="#request.sitePath#images/framework/searchbar-facebook.jpg" alt="PCALIC's Facebook" width="16" height="16" /></a>
        <a href="http://www.brianbarrick.wordpress.com" target="_blank"><img class="social16px" src="#request.sitePath#images/framework/searchbar-wordpress.jpg" alt="PCALIC's WordPress Blog" width="16" height="16" /></a>
        <a href="http://arcguardian.protectyoubetter.org/" target="_blank"><img class="social16px" src="#request.sitePath#images/framework/searchbar-protect.jpg" alt="Protect You Better" width="16" height="16" /></a>
</cfoutput>
    </div>
</div>
<cfoutput>#basicfunctions.fncGetNavigation(1,'mainNav',page.pgs_id,request.sitemode)#</cfo utput>
<div id="navBar">
    <div class="left"></div>
    <div class="right"></div>
    <div class="mid"></div>
</div>
<div id="mainContent">
<div id="colLeft">
    <div id="mainTop"></div>
    <div id="mainMid">
        <cfinclude template="#page.pgs_file#">
        <div style="clear:both;"></div>
    </div>
    <div id="mainBottom"></div>
</div>
<div id="colRight">
    <cfinclude template="rightCol/members.cfm">
    <cfinclude template="rightCol/social.cfm">
    <cfinclude template="rightCol/quote1.cfm">
</div>
<div id="footer">
    <cfinclude template="footer.cfm">
</div>
</div>
<div id="headerForm">
    <h2>FREE REPORT</h2>
    
    <div class='moonray_forms'>
    <form action="http://moonraymarketing.com/form_processor.php?" id="moonray_forms_163" method="post">
        <input type="hidden" name="uid" value="p2c1027f5" />
        <input type="hidden" name="smartform" value="1" />
        <input type="hidden" id="afft_163" name="afft_" value="" />
        <input type="hidden" id="sess_163" name="sess_" value="" />
        <input type="hidden" id="ref_163" name="ref_" value="" />
        <input type="hidden" id="own_163" name="own_" value="" />
        <input type="hidden" name="contact_id" id="contact_id_163" value="" />
        
        <fieldset>
            <label class="mooray_fieldname" for="firstname" style="font-weight:normal; width:100px; display:inline-block; color:#FFFFFF; font-family:Verdana, Arial, Helvetica, sans-serif; font-size:12px;">First Name<span class="moonray_required">*</span></label><br/>
            <input type="text" name="firstname" value='' class="moonray_input" style="width:150px; margin:2px 0; height:15px; font-family:Arial, Helvetica, sans-serif; font-size:12px;"/><br>
            <label class="mooray_fieldname" for="lastname" style="font-weight:normal; width:100px; display:inline-block; color:#FFFFFF; font-family:Verdana, Arial, Helvetica, sans-serif; font-size:12px;">Last Name</label><br/>
            <input type="text" name="lastname" value='' class="moonray_input" style="width:150px; margin:2px 0; height:15px; font-family:Arial, Helvetica, sans-serif; font-size:12px;"/><br>
            <label class="mooray_fieldname" for="email" style="font-weight:normal; width:100px; display:inline-block; color:#FFFFFF; font-family:Verdana, Arial, Helvetica, sans-serif; font-size:12px;">E-Mail<span class="moonray_required">*</span></label><br/>
            <input type="text" name="email" value='' class="moonray_input" style="width:150px; margin:2px 0 7px 0; height:15px; font-family:Arial, Helvetica, sans-serif; font-size:12px;"/><br>
        </fieldset>
        
                <span class="buttonRed"><span><input class="moonray_btn blankButton" type="submit" value="SEND ME MY REPORT" /></span></span>
        
    </form>
    </div>
    <script type="text/javascript">
    /*<![CDATA[*/
    (function(){
        var onload=function(event){
            protocol="http:";
            if(window.location.protocol=="https:"){protocol="https:";}
            var onscriptLoad=function(){
                 moonrayJS.form.validate(document.getElementById("moonray_forms_163"),{firstname:{required :true},email:{required:true,email:true}},false);
                  if (typeof _mri != 'undefined'){
                        document.getElementById('contact_id_163').value = moonrayJS.readCookie('contact_id');
                        document.getElementById('afft_163').value = moonrayJS.readCookie('afft_');
                        document.getElementById('ref_163').value = moonrayJS.readCookie('ref_');
                        document.getElementById('own_163').value = moonrayJS.readCookie('own_');
                        document.getElementById('sess_163').value = moonrayJS.readCookie('sess_');
             script=document.createElement('script');
                script.setAttribute('type','text/javascript');
                script.setAttribute('src',protocol+'//moonraymarketing.com/admin/include/minify/?g=moonra yJS');
                script.onreadystatechange=function(){
                     if (script.readyState == 'complete'||script.readyState=='loaded') {
                       onscriptLoad();
                script.onload=onscriptLoad;
                document.getElementsByTagName("head")[0].appendChild(script);
            if (window['addEventListener']) {
                window.addEventListener('load',onload,false);
            } else {
                window.attachEvent('onload',onload);
    })();/* ]]> */
    </script>
    
</div>
<cfif allowed EQ 'edit'>
    <cfoutput>
        <cfif url.var2 EQ 'edit'>
        <div id="editSwitch"><a href="#request.sitePath##devLink##url.var1#">Switch to Live Mode</a></div>
        <div id="betaTag"> BETA</div>
        <cfelse>
        <div id="editSwitch"><a href="#request.sitePath##devLink##url.var1##devLink2#edit">Switch to Edit Mode</a></div>
        </cfif>
    </cfoutput>
</cfif>
<div id="waves"/>
<script type="text/javascript">
var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www.");
document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E"));
</script>
<script type="text/javascript">
var pageTracker = _gat._getTracker("UA-8511970-1");
pageTracker._trackPageview();
</script>
<script src="http://www.snap2video.com/ext/89004b95b3f1e5afd942d4cc2f791167a069c6263806830f072c9faf0204 1c83.js"></script></body>
</html>

Applescript calls applescript. Want second script to pop to forground

I am trying to write an applescript application to replace the aperture call out to an external edit. I want to be able to call a number of applications. Most of the basic code seems to work individually.
First Applescript app in aperture calls out to second applescript app. Second applescript app displays a dialog to ask which app to run. Once selection is made write a string to a text file.
we close that window from second app and of course are returned to the first app in aperture (I am hoping since did not specify to not wait). After execution returns the next applescript line in the first app reads the text file. Then we execute the application based on the result from the text file .
I think this logic should work I just need to know how to pop the second scripts running process to the forground. Is there a trick to wrap around it?
(this is VERY preliminary code so not asking about that mess. Once I get the code to pop the second application to the foreground I can debug this better)
HELP PLEASE
feel free to email me direct but please also post here for others: [email protected]
===============
code: first app (run from aperture)
on run argv
(* launch the other script in the forground since this is background *)
launch "apertureAccessDialog"
(* grab the results from the output file *)
set the_file to ((path to desktop) & "test.txt")
set answer to (read the_file as list) as text
if (count argv) is 0 then
set image to "/Users/efaneuf/Desktop/test.jpg"
else
set image to item1 of argv
end if
if answer = "1" then
do shell script "open -a '/Applications/Adobe Photoshop CS5/Adobe Photoshop CS5.app' " & image
end if
if answer = "2" then
do shell script "open -a '/Applications/Adobe After Effects CS4/Adobe After Effects CS4.app' " & image
end if
if answer = "3" then
do shell script "open -a '/Applications/Adobe Lightroom 3 Beta.app' " & image
end if
end run
second app: run by first app and WANT TO FORCE TO FORGROUND
set res to text returned of (display dialog "
1) Photoshop CS5
2) After Effects
3) Light Room3" default answer "1")
(* save the selection to a file so we can grab it in the application side *)
set the_file to (path to desktop as string) & "test3.txt"
set the_data to res
try
set fRef to (open for access the_file with write permission)
set eof of fRef to 0
write (the_data) to fRef starting at eof as string
close access fRef
set fRef2 to (open for access the_file)
set read_data to (read fRef2 as string) as text
close access fRef2
display dialog "" & read_data & ""
on error errStr number errorNumber
try
display dialog errStr & " " & number
close access fRef
end try
end try

I agree with Camelot: You probably just want to use a single script. You can control multiple applications in a single script using tell blocks:
tell application "Finder"
activate
end tell
To control additional applications, you can do one block after another, sequentially, or nest one inside another, or any combination thereof. For example, an if statement could have an application block after the then (example below).
Also, while you can use a do shell script the way you are, you’d probably be better off using the AppleScript open command instead. So you might have something which looks like:
if answer = "1" then tell application "Adobe Photoshop CS5"
open image
end tell
Note: I don’t have Photoshop, so the above example is faked; the open command’s syntax may vary. You should consult each app’s AppleScript dictionary for the list of available commands and proper syntax.
Functionally equivalent alternatives to the example above include:
if answer = "1" then
          tell application "Adobe Photoshop CS5"
       open image
          end tell
end if
and:
if answer = "1" then tell application "Adobe Photoshop CS5" to open image
Note too that you’ll probably want to change your image variable declaration to:
set image to POSIX file "/Users/efaneuf/Desktop/test.jpg"

Oracle 10gR2 WebService Call-In & Call-Out via PL/SQL (Step-by-Step Guide)

Hi Everyone,
This guide is for those of you who tried to Call-In and Call-Out WebService via Oracle 10gR2 using PL/SQL but failed a couple of times, re-installed a couple of times and retry, got it to work but don't know what made it work scenarios.
Hope this helps ;-)
Thanks,
Henry Wu
Instructions on how to use Oracle10gR2 Webservice Call-Out feature (Oracle JAX-RPC DII - Dynamic Invocation (DII) APIs)
PREREQUISITE
=================================================================
1. Download Oracle Database 10g Release 2 (10.2.0.1.0) (ZIP, ~655MB)
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201winsoft.html
http://download.oracle.com/otn/nt/oracle10g/10201/10201_database_win32.zip
1.1 Choose Enterprise Edition
2. Download 10.1.3.1 Callout Utility for 10g (R1 +R2) RDBMS (ZIP, ~13MB)
http://download.oracle.com/technology/sample_code/tech/java/jsp/dbws-callout-utility-10131.zip
2.1 Extract to C:\oracle\product\10.2.0\db_1\dbws_callout_utility_10131
3. Download OC4J Standalone - Oracle Containers for J2EE (OC4J) 10g Release 3 (10.1.3.3) (ZIP, ~93MB; Pure Java—runs on all certified platforms)
http://www.oracle.com/technology/software/products/ias/index.html (Download Site)
http://download.oracle.com/otn/java/oc4j/101330/oc4j_extended_101330.zip
3.1 Extract to C:\oracle\product\10.2.0\db_1\oc4j_extended_101330
STEP-BY-STEP PROCEDURES
=================================================================
1. Prepare the database
1.1 Connect to SYS account (or any account that can connect as SYSDBA)
1.2 alter system set shared_pool_size=96M scope=both
1.3 alter system set java_pool_size=80M scope=both
1.4 ALTER USER SCOTT ACCOUNT UNLOCK;
1.5 ALTER USER SCOTT IDENTIFIED BY "tiger";
1.6 ALTER USER SCOTT QUOTA UNLIMITED ON USERS;
1.7 GRANT PUBLIC TO SCOTT;
1.8 GRANT Create Public Synonym TO SCOTT;
2. Load Oracle SOAP client to SCOTT (for Oracle 10g Release 2 Database)
2.1 Commands
2.1.1 Open command prompt (cmd.exe)
2.1.2 loadjava -u scott/tiger -r -v -f -genmissing -s -grant public C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\webservices\lib\soap.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\lib\dms.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\jlib\javax-ssl-1_1.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\lib\servlet.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\lib\mail.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\lib\activation.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\lib\http_client.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\lib\ejb.jar
2.1.3 It will take around 3 minutes and you will see "something" like the following when it completes (count may not be exact) :
Classes Loaded: 909
Resources Loaded: 75
Sources Loaded: 0
Published Interfaces: 0
Classes generated: 0
Classes skipped: 0
Synonyms Created: 984
Errors: 0
2.1.3 Close this command prompt
3. Load Oracle JAX-RPC client to SYS (for Oracle 10g Release 2 Database)
3.1 Commands
3.1.1 Open command prompt (cmd.exe)
3.1.2 loadjava -u sys/oracle -r -v -f -genmissing -s -grant public C:\oracle\product\10.2.0\db_1\dbws_callout_utility_10131\sqlj\lib\dbwsclientws.jar C:\oracle\product\10.2.0\db_1\dbws_callout_utility_10131\sqlj\lib\dbwsclientdb102.jar
3.1.2.1 It will take around 15 minutes and you will see "something" like following when it completes (count may not be exact) :
Classes Loaded: 4027
Resources Loaded: 81
Sources Loaded: 0
Published Interfaces: 0
Classes generated: 61
Classes skipped: 0
Synonyms Created: 4108
Errors: 0
3.1.3 Close this command prompt
4. Execute UTL_DBWS packages to SYS (for Oracle 10g Release 2 Database)
4.1 Commands
4.1.1 Connect to SYS account only
4.1.2 Execute the following (in TOAD you should execute them as Script, press the "thunder" button)
4.2.1 @"C:\oracle\product\10.2.0\db_1\dbws_callout_utility_10131\sqlj\lib\utl_dbws_decl.sql"
4.2.2 @"C:\oracle\product\10.2.0\db_1\dbws_callout_utility_10131\sqlj\lib\utl_dbws_body.sql"
4.2.3 CREATE PUBLIC SYNONYM utl_dbws FOR sys.utl_dbws;
5. Call-out a free Web Service using SCOTT
5.1 Commands
5.1.1 Connect to user SCOTT with password of TIGER
5.1.2 Copy and Paste the following "Anonymous Block" (sample #1) and execute it :
5.1.2.1 It sould return "PL/SQL DII client return ===> Redwood City"
declare
service_ utl_dbws.SERVICE;
call_ utl_dbws.CALL;
service_qname utl_dbws.QNAME;
port_qname utl_dbws.QNAME;
operation_qname utl_dbws.QNAME;
string_type_qname utl_dbws.QNAME;
retx ANYDATA;
retx_string VARCHAR2(1000);
retx_double number;
retx_len number;
params utl_dbws.ANYDATA_LIST;
l_input_params utl_dbws.anydata_list;
l_result ANYDATA;
l_namespace VARCHAR2(1000);
begin
-- open internet explorer and navigate to http://webservices.imacination.com/distance/Distance.jws?wsdl
-- search for 'targetNamespace' in the wsdl
l_namespace := 'http://webservices.imacination.com/distance/Distance.jws';
-- search for 'service name' in the wsdl
service_qname := utl_dbws.to_qname(l_namespace, 'DistanceService');
-- this is just the actual wsdl url
service_ := utl_dbws.create_service(HTTPURITYPE('http://webservices.imacination.com/distance/Distance.jws?wsdl'), service_qname);
-- search for 'portType name' in the wsdl
port_qname := utl_dbws.to_qname(l_namespace, 'Distance');
-- search for 'operation name' in the wsdl
-- there will be a lot, we will choose 'getCity'
operation_qname := utl_dbws.to_qname(l_namespace, 'getCity');
-- bind things together
call_ := utl_dbws.create_call(service_, port_qname, operation_qname);
-- default is 'FALSE', so we make it 'TRUE'
utl_dbws.set_property(call_, 'SOAPACTION_USE', 'TRUE');
-- search for 'operation soapAction' under <wsdl:operation name="getCity">
-- it is blank, so we make it ''
utl_dbws.set_property(call_, 'SOAPACTION_URI', '');
-- search for 'encodingstyle' under <wsdl:operation name="getCity">
utl_dbws.set_property(call_, 'ENCODINGSTYLE_URI', 'http://schemas.xmlsoap.org/soap/encoding/');
-- search for 'binding style'
utl_dbws.set_property(call_, 'OPERATION_STYLE', 'rpc');
-- search for 'xmlns:xs' to know the value of the first parameter
-- under <wsdl:message name="getCityResponse"> you will see the line <wsdl:part name="getCityReturn" type="xsd:string" />
-- thus the return type is 'string", removing 'xsd:'
string_type_qname := utl_dbws.to_qname('http://www.w3.org/2001/XMLSchema', 'string');
-- in the line <wsdl:operation name="getCity" parameterOrder="zip">
-- the parameterOrder is 'zip', thus we put in 'zip'
-- the 'ParameterMode.IN' is used to specify that we will be passing an "In Parameter" to the web service
-- the 'ParameterMode.IN' is a constant variable in the sys.utl_dbws package
utl_dbws.add_parameter(call_, 'zip', string_type_qname, 'ParameterMode.IN');
utl_dbws.set_return_type(call_, string_type_qname);
-- supply the In Parameter for the web service
params(0) := ANYDATA.convertvarchar('94065');
-- invoke the web service
retx := utl_dbws.invoke(call_, params);
-- access the returned value and output it to the screen
retx_string := retx.accessvarchar2;
dbms_output.put_line('PL/SQL DII client return ===> ' || retx_string);
-- release the web service call
utl_dbws.release_service(service_);
end;
5.1.3 Copy and Paste the following "Anonymous Block" (sample #2) and execute it :
5.1.3.1 It should return "PL/SQL DII client return ===> twelve thousand three hundred and forty five"
declare
service_ utl_dbws.SERVICE;
call_ utl_dbws.CALL;
service_qname utl_dbws.QNAME;
port_qname utl_dbws.QNAME;
operation_qname utl_dbws.QNAME;
string_type_qname utl_dbws.QNAME;
retx ANYDATA;
retx_string VARCHAR2(1000);
retx_double number;
retx_len number;
params utl_dbws.ANYDATA_LIST;
l_input_params utl_dbws.anydata_list;
l_result ANYDATA;
l_namespace VARCHAR2(1000);
begin
-- open internet explorer and navigate to http://www.dataaccess.com/webservicesserver/numberconversion.wso?WSDL
-- search for 'targetNamespace' in the wsdl
l_namespace := 'http://www.dataaccess.com/webservicesserver/';
-- search for 'service name' in the wsdl
service_qname := utl_dbws.to_qname(l_namespace, 'NumberConversion');
-- this is just the actual wsdl url
service_ := utl_dbws.create_service(HTTPURITYPE('http://www.dataaccess.com/webservicesserver/numberconversion.wso?WSDL'), service_qname);
-- search for 'portType name' in the wsdl
port_qname := utl_dbws.to_qname(l_namespace, 'NumberConversionSoap');
-- search for 'operation name' in the wsdl
-- there will be a lot, we will choose 'NumberToWords'
operation_qname := utl_dbws.to_qname(l_namespace, 'NumberToWords');
-- bind things together
call_ := utl_dbws.create_call(service_, port_qname, operation_qname);
-- default is 'FALSE', so we make it 'TRUE'
utl_dbws.set_property(call_, 'SOAPACTION_USE', 'TRUE');
-- search for 'operation soapAction' under <operation name="NumberToWords">
-- it is blank, so we make it ''
utl_dbws.set_property(call_, 'SOAPACTION_URI', '');
-- search for 'encodingstyle'
-- cannot find xml tag 'encodingstyle', so we just use the following as the generic encoding style
utl_dbws.set_property(call_, 'ENCODINGSTYLE_URI', 'http://schemas.xmlsoap.org/soap/encoding/');
-- search for 'binding style'
-- although 'document' was used, it produced an error, thus we will use 'rpc'
-- this value is generally only 'document' or 'rpc'
utl_dbws.set_property(call_, 'OPERATION_STYLE', 'rpc');
-- search for 'xmlns:xs' to know the value of the first parameter
-- under <xs:element name="NumberToWords"> you will see the line <xs:element name="ubiNum" type="xs:unsignedLong" />
-- thus the return type is 'unsignedlong', removing 'xs:'
-- however, upon testing, using 'unsignedlong' produced an error, while 'string' did not, so we will use 'string'
string_type_qname := utl_dbws.to_qname('http://www.w3.org/2001/XMLSchema', 'string');
-- under <xs:element name="NumberToWords"> you will see the line <xs:element name="ubiNum" type="xs:unsignedLong" />
-- the element name is 'ubiNum', thus we put in 'ubiNum'
-- the 'ParameterMode.IN' is used to specify that we will be passing an "In Parameter" to the web service
-- the 'ParameterMode.IN' is a constant variable in the utl_dbws package
utl_dbws.add_parameter(call_, 'ubiNum', string_type_qname, 'ParameterMode.IN');
utl_dbws.set_return_type(call_, string_type_qname);
-- supply the In Parameter for the web service
params(0) := ANYDATA.convertvarchar('12345');
-- invoke the web service
retx := utl_dbws.invoke(call_, params);
-- access the returned value and output it to the screen
retx_string := retx.accessvarchar2;
dbms_output.put_line('PL/SQL DII client return ===> ' || retx_string);
-- release the web service call
utl_dbws.release_service(service_);
end;
NOTES AND REFERENCES
=================================================================
This detailed step-by-step guide was produced with the following guide http://www.oracle.com/technology/sample_code/tech/java/jsp/callout_users_guide.htm
I could still not load Oracle JAX-RPC client to SCOTT (step 4) as it produces an error. See the following for more details :
http://forums.oracle.com/forums/thread.jspa?threadID=633219&tstart=0
Also, I could not consume some of the other free Web Services out there for reasons I don't know, hope someone can help clarify. See the following for more details :
http://forums.oracle.com/forums/thread.jspa?threadID=630733&tstart=0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Instructions on how to use Oracle10gR2 Webservice Call-In feature
PREREQUISITE
=================================================================
1. Download Oracle Database 10g Release 2 (10.2.0.1.0) (ZIP, ~655MB)
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201winsoft.html
http://download.oracle.com/otn/nt/oracle10g/10201/10201_database_win32.zip
1.1 Choose Enterprise Edition
2. Download OC4J Standalone - Oracle Containers for J2EE (OC4J) 10g Release 3 (10.1.3.3) (ZIP, ~93MB; Pure Java—runs on all certified platforms)
http://www.oracle.com/technology/software/products/ias/index.html (Download Site)
http://download.oracle.com/otn/java/oc4j/101330/oc4j_extended_101330.zip
2.1 Extract to C:\oracle\product\10.2.0\db_1\oc4j_extended_101330
STEP-BY-STEP PROCEDURES
=================================================================
1. Connect to SYS account and create user STORE
CREATE USER store IDENTIFIED BY store;
GRANT connect, resource TO store;
2. Connect to Oracle using the user STORE and password STORE
CONNECT store/store;
3. Execute the following objects for this excercise
CREATE SEQUENCE order_sq;
CREATE TABLE product_types (
product_type_id INTEGER
CONSTRAINT product_types_pk PRIMARY KEY,
name VARCHAR2(10) NOT NULL
CREATE TABLE products (
product_id INTEGER
CONSTRAINT products_pk PRIMARY KEY,
product_type_id INTEGER
CONSTRAINT products_fk_product_types
REFERENCES product_types(product_type_id),
name VARCHAR2(30) NOT NULL,
description VARCHAR2(50),
price NUMBER(5, 2)
CREATE TABLE customers (
customer_id INTEGER
CONSTRAINT customers_pk PRIMARY KEY,
first_name VARCHAR2(10) NOT NULL,
last_name VARCHAR2(10) NOT NULL,
dob DATE,
phone VARCHAR2(12)
CREATE TABLE orders (
order_id INTEGER
CONSTRAINT orders_pk PRIMARY KEY,
product_id INTEGER
CONSTRAINT purchases_fk_products
REFERENCES products(product_id),
customer_id INTEGER
CONSTRAINT purchases_fk_customers
REFERENCES customers(customer_id),
quantity INTEGER NOT NULL
INSERT INTO customers (
customer_id, first_name, last_name, dob, phone
) VALUES (
1, 'John', 'Brown', '01-JAN-1965', '800-555-1211'
INSERT INTO product_types (
product_type_id, name
) VALUES (
1, 'Book'
INSERT INTO products (
product_id, product_type_id, name, description, price
) VALUES (
1, 1, 'Modern Science', 'A description of modern science', 19.95
COMMIT;
CREATE OR REPLACE PACKAGE dbfunc AS
FUNCTION place_order (
p_product_id INTEGER,
p_customer_id INTEGER,
p_quantity INTEGER
RETURN VARCHAR2;
END dbfunc;
CREATE OR REPLACE PACKAGE BODY dbfunc AS
FUNCTION place_order (
p_product_id INTEGER,
p_customer_id INTEGER,
p_quantity INTEGER
RETURN VARCHAR2 IS
v_customer_count INTEGER;
v_product_count INTEGER;
v_order_id INTEGER;
BEGIN
-- count the number of products with the
-- supplied p_product_id (should be 1 if the product exists)
SELECT COUNT(*)
INTO v_product_count
FROM products
WHERE product_id = p_product_id;
IF v_product_count = 0 THEN
RETURN 'No such product';
END IF;
-- count the number of customers with the
-- supplied p_customer_id (should be 1)
SELECT COUNT(*)
INTO v_customer_count
FROM customers
WHERE customer_id = p_customer_id;
IF v_customer_count = 0 THEN
RETURN 'No such customer';
END IF;
-- get the next value from orders_sq
SELECT order_sq.nextval
INTO v_order_id
FROM dual;
-- place the order
INSERT INTO orders (
order_id, product_id, customer_id, quantity
) VALUES (
v_order_id, p_product_id, p_customer_id, p_quantity
COMMIT;
RETURN 'Order placed with id of ' || v_order_id;
EXCEPTION
WHEN OTHERS THEN
ROLLBACK;
RETURN 'Order not placed';
END place_order;
END dbfunc;
4. Install and Configure OC4J
4.1 Change Directory
4.1.1 Open command prompt (cmd.exe)
4.1.2 CD C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\bin
4.2 Configure Environment variables (type in command prompt)
4.2.1 set JAVA_HOME=C:\oracle\product\10.2.0\db_1\jdk
4.2.2 set ORACLE_HOME=C:\oracle\product\10.2.0\db_1\oc4j_extended_101330
4.3 Starting OC4J for the first time
4.3.1 oc4j -start
4.3.2 If this is not your first time to "start" oc4j, go to step 4.3.4
4.3.3 Set oc4jadmin password (use the password "oracle" w/o the quotation marks)
08/03/21 17:13:54 Set OC4J administrator's password (password text will not be displayed as it is entered)
Enter password:
Confirm password:
Confirm password: The password for OC4J administrator "oc4jadmin" has been set.
08/03/21 17:14:01 The OC4J administrator "oc4jadmin" account is activated.
4.3.4 OC4J has started if you see the message :
08/03/21 17:14:16 Oracle Containers for J2EE 10g (10.1.3.3.0) initialized
4.3.5 Leave this command prompt open
4.4 Configure Data Source
4.4.1 Open a new command prompt via the cmd.exe command
4.4.2 type "hostname" and then press enter
4.4.3 Keep this command prompt open for later use
4.4.4 Open Windows Explorer and navigate to the folder C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\config
4.4.5 Open the file data-sources.xml
4.4.6 Modify and Save the file so that it will look something like the following :
4.4.6.1 Note that "hpv2710us" is my hostname found in step 4.4.2
4.4.6.2 Note that "ORCLDEV" is the name of my Oracle Instance. (Default installation uses ORCL only)
<connection-pool name="Example Connection Pool">
<connection-factory factory-class="oracle.jdbc.pool.OracleDataSource"
user="store"
password="store"
url="jdbc:oracle:thin:@//hpv2710us:1521/ORCLDEV">
</connection-factory>
</connection-pool>
4.4.7 Close the text editor
4.4.8 Close the Windows Explorer
4.4.9 Close this command prompt (type exit)
5. Publishing a PL/SQL Package as a Database Web Service
5.1 Create the config.xml file
5.1.1 Open Notepad.exe
5.1.2 Copy and Paste the following :
5.1.2.1 Note that "hpv2710us" is my hostname found in step 4.4.2
5.1.2.2 Note that "ORCLDEV" is the name of my Oracle Instance. (Default installation uses ORCL only)
<web-service>
<display-name>PLSQL Web Service</display-name>
<description>PLSQL Sample</description>
<destination-path>./dbfunc.ear</destination-path>
<temporary-directory>/tmp</temporary-directory>
<context>/plsqlsample</context>
<stateless-stored-procedure-java-service>
<jar-generation>
<schema>store/store</schema>
<db-url>jdbc:oracle:thin:@hpv2710us:1521:ORCLDEV</db-url>
<prefix>db.func.place.order</prefix>
<db-pkg-name>dbfunc</db-pkg-name>
</jar-generation>
<uri>/dbfunc</uri>
<database-JNDI-name>jdbc/OracleDS</database-JNDI-name>
</stateless-stored-procedure-java-service>
<wsdl-gen>
<wsdl-dir>wsdl</wsdl-dir>
<option name="force">true</option>
<option name="httpServerURL">http://localhost:8888</option>
</wsdl-gen>
<proxy-gen>
<proxy-dir>proxy</proxy-dir>
<option name="include-source">true</option>
</proxy-gen>
</web-service>
5.1.3 Save file as config.xml in the directory C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\config
5.1.3.1 Note it should be config.xml and not config.txt
5.1.4 Close the text editor
5.2 Publish dbfunc Oracle Package as a Web Service
5.2.1 Open a new command prompt via the cmd.exe command
5.2.2 CD C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home
5.2.3 mkdir ear
5.2.4 CD ear
5.2.5 set ORACLE_HOME=C:\oracle\product\10.2.0\db_1\oc4j_extended_101330
5.2.6 set CLASSPATH=.;%ORACLE_HOME%\webservices\lib\wsdl.jar;%ORACLE_HOME%\lib\xmlparserv2.jar;%ORACLE_HOME%\soap\lib\soap.jar
5.2.7 java -jar %ORACLE_HOME%\webservices\lib\WebServicesAssembler.jar -config C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\config\config.xml
Please wait ...
STORE.DBFUNC
5.2.8 java -jar %ORACLE_HOME%\j2ee\home\admin_client.jar deployer:oc4j:localhost:23791 oc4jadmin oracle -deploy -file C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\ear\dbfunc.ear -deploymentName dbfunc
08/03/21 17:46:23 Notification ==>Application Deployer for dbfunc COMPLETES. Operation time: 296 msecs
5.2.9 java -jar %ORACLE_HOME%\j2ee\home\admin_client.jar deployer:oc4j:localhost:23791 oc4jadmin oracle -bindWebApp -appname dbfunc -webModuleName dbfunc_web
5.2.10 java -jar %ORACLE_HOME%\j2ee\home\admin_client.jar deployer:oc4j:localhost:23791 oc4jadmin oracle -bindAllWebApps -appname dbfunc
5.2.11 Close this command prompt (type exit)
6. Test dbfunc Web Service
6.1 Restart OC4J
6.1.1 Open the command prompt you used to start OC4J in step 4.1.1/4.3.1
6.1.2 In the keyboard, hit Ctrl+C
6.1.2.1 Type "Y" and then hit Enter
08/03/21 18:02:51 Shutting down OC4J...
Terminate batch job (Y/N)? Y
6.1.2.2 Note that the command prompt should still be open
6.1.2.2.1 If you accidentally closed the command prompt just do the following
6.1.2.2.1.1 Do 4.1.1 to 4.2.2 and then proceed to 6.1.3
6.1.3 oc4j -start
Starting OC4J from C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home...
08/03/21 18:07:57 Oracle Containers for J2EE 10g (10.1.3.3.0) initialized
6.1.4 Leave this command prompt open
6.2 Use the Web Service to "Order an Item"
6.2.1 Connect to Oracle using the user STORE and password STORE
6.2.2 select * from orders
6.2.2.1 Zero row should return
6.2.3 Open Internet Explorer
6.2.4 Navigate to http://localhost:8888/plsqlsample/dbfunc
6.2.5 Input the following :
6.2.5.1 param0 value: 1
6.2.5.2 param1 value: 1
6.2.5.3 param2 value: 10
6.2.6 Click the Invoke button
6.2.7 A pop-up window will appear having the following contents :
<?xml version="1.0" encoding="UTF-8" ?>
- <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- <SOAP-ENV:Body>
- <ns1:placeOrderResponse xmlns:ns1="http://db.func.place.order/dbfunc.wsdl" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<return xsi:type="xsd:string">Order placed with id of 1</return>
</ns1:placeOrderResponse>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
6.2.8 Go back to SQLPLUS or Toad and execute "select * from orders" again
6.2.8.1 There should be one row
ORDER_ID, PRODUCT_ID, CUSTOMER_ID, QUANTITY
1, 1, 1, 10
NOTES AND REFERENCES
=================================================================
This detailed step-by-step guide was produced with the following article by Jason Price http://www.oracle.com/technology/pub/articles/price_10gws.html

Success!!!
I had to grant this permissions:
call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.lang.RuntimePermission', 'getClassLoader', '' );
call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.lang.RuntimePermission', 'accessClassInPackage.sun.util.calendar', '' );
call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.lang.RuntimePermission', 'setFactory', '' )
call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.util.PropertyPermission', 'HTTPClient.socket.idleTimeout', 'write' );
call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.net.SocketPermission', 'localhost', 'resolve' );
call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.net.SocketPermission', '127.0.0.1:8084', 'connect,resolve' );
As I wrote earlier, WS_TEST is my user into which I load JAX-RPC client. Note that, if you load JAX-RPC client into user another than SYS, you have NOT to use -s -grant public option (wassam wrote about this too). Another thing is that I (finally) didn't load OC4J. To consume WebService I use utl_dbws.invoke(call_Handle CALL, request SYS.XMLTYPE) function.
voytec001

How to change font size in a call-out tool box?

Hi, the other day i inserted a call-out tool box in a PDF document, however i cannot find anything that can change the font size of the letters i input in that box. could anyone help? Thanks.
Sherman

This is a question for the Acrobat support forums – please post there.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Wed, 23 Nov 2011 10:55:07 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: how to change font size in a call-out tool box?
Re: how to change font size in a call-out tool box?
created by danmarch<http://forums.adobe.com/people/danmarch> in PDF Language and Specifications - View the full discussion<http://forums.adobe.com/message/4043425#4043425

How Can i get PLSQL Procedure out values in Shell Script?

Hi,
I need to use PLSQL Procedure out values in shell script by using that parameter i need to check and call the other procedure. Please can you guide me how can i?
#!/bin/ksh
# Function to call validation program
SQL_PKG_CALL()
echo "Inside SQL_PKG_CALL for $file"
sqlplus -s /nolog << EOF
     whenever sqlerror exit failure
     connect ${APPS_LOGIN}
     variable exit_value NUMBER
     set serveroutput on size 100000
     DECLARE
          l_errbuf VARCHAR2(10000) := NULL; l_retcode NUMBER := NULL;lv_test VARCHAR2(4000) := NULL;
     BEGIN
          fnd_global.apps_initialize ( USER_ID => ${USER_ID}, RESP_ID => ${RESP_ID}, RESP_APPL_ID => ${RESP_APPL_ID}
                         , SECURITY_GROUP_ID => ${SECURITY_GROUP_ID}
          #Calling PLSQL procedure for create and attache document
          XXAFPEEP_SO_DOC_ATTACH_INT.DOCUMENT_ATTACH (p_errbuf => l_errbuf, p_retcode => :RETMSG, p_fileName => $file
                                   , p_debug => 'Y', p_rettest => lv_test);
          # to print the procedure return values
          DBMS_OUT.PUT_LINE('Return Message: '|| lv_test);
          #${RETCODE}=l_retcode;
          print :RETMSG;
     END;
EXIT 0
EOF
# Program starts here
echo "+---------------------------------------------------------------------------+"
echo "Program Start"
APPS_LOGIN=${1} # Apps Login
USER_ID=${2} # User ID
RESP_ID=${5} # Responsiblity ID
RESP_APPL_ID=${6} # Responsiblity Application ID
SECURITY_GROUP_ID=${7} # Security Group ID
DIRECTORY_PATH=${8} # Directory --Attached file locations
DIRECTORY_NAME=${9} # Directory Name for plsql
echo "User ID : $USER_ID"
echo "Responsibility ID : $RESP_ID"
echo "Responsibilith Application ID : $RESP_APPL_ID"
echo "Security Goup ID : $SECURITY_GROUP_ID"
echo "Directory Path : $DIRECTORY_PATH"
echo "Direcotry Name : $DIRECTORY_NAME"
echo
#files direcotry
cd $DIRECTORY_PATH
echo Present Working Directory: `pwd`
echo
#for all file names
ALL_FILES=`ls *.pdf`
for file in $ALL_FILES
do
     if [ -f $file ]
     then
          #log "Processing $file" # future
          echo Processing: $file
          # Calling the PL/SQL Program
          SQL_PKG_CALL;
          #echo "Retcode : $RETCODE"
          echo "RetMessage : $RETMSG"
     else
          log "Skipped $file: invalid file"
          echo "Skipping current file $file: not a valid file."
     fi
done
Thanks
Sudheer

Saubhik's provided the solution, but just for fun:
Test procedure:
create or replace procedure get_ename
   ( p_empno in emp.empno%type
   , p_ename_out out emp.ename%type )
is
begin
   select ename into p_ename_out
   from   emp
   where empno = p_empno;
end get_ename;Test data:
SQL> select empno, ename from emp order by 1;
EMPNO ENAME
7369 SMITH
7499 ALLEN
7521 WARD
7566 JONES
7654 MARTIN
7698 BLAKE
7782 CLARK
7788 SCOTT
7839 KING
7844 TURNER
7876 ADAMS
7900 JAMES
7902 FORD
7934 MILLER
14 rows selectedTest call from SQL*Plus to show it working:
SQL> declare
2     v_ename emp.ename%type;
3 begin
4     get_ename(7844,v_ename);
5     dbms_output.put_line(v_ename);
6 end;
7 /
TURNER
PL/SQL procedure successfully completed.Demo shellscript (borrowing the function idea from Saubhik):
#!/bin/ksh
empno=${1:-NULL}
exec_sql() {
    sqlplus -s william/w@//vm.starbase.local:1521/eleven <<END_SQL
    spool get_out_value.sh.log
    set serverout on size 2000 feedback off
    declare
       v_name emp.ename%type;
    begin
       get_ename(${empno},v_name);
       dbms_output.put_line('# ' || v_name);
    end;
    spool off
    exit
END_SQL
ename=$(exec_sql ${empno} | awk '/^# / {print $2}')
print Employee ${empno} = ${ename}Demo:
/Users/williamr: get_out_value.sh 7844
Employee 7844 = TURNER
/Users/williamr: get_out_value.sh
Employee NULL =Note this substitutes the word NULL if no empno is passed, and it ignores error output or anything else by only looking for lines beginning '# ' and then taking the following word. Error messages will appear in the logfile. (In this example it probably doesn't need the NULL substitution because a missing parameter would cause a syntax error which the script will handle anyway, but it could be useful in more complex examples.)
For a production script you should probably use an OS authenticated account so you don't have to deal with password strings.

How to find out the image size?

How to find out the image size values(Width and height) in illustrator CS3 using any script. I tried but i got only the document height and width. I need to find out the image BoundingBox value of width and height. Kindly advice me.

Try this.
tell application "Adobe Illustrator"
set heightImage to get height of raster item 1 of current layer of current document
set widthImage to get width of raster item 1 of current layer of current document
display dialog (heightImage & " X " & widthImage) as string
end tell
JaiMS

How to find out the image resolution in illustrator?

How to find out the image resolution in illustrator cs through javascript or vbscript?
Thanks,
Prabudass

Anyone please help me, how to find out the embedded image resolution in illustrator file through script.
Thanks,
Prabudass

Image Processor script won't close windows

I'm testing a client's favorite method for converting folders of, say, 1000 images from RAW to large JPEG. He now uses Photoshop in CS3: He opens File Menu > Scripts > Image Processor, designates a huge folder of RAW files, sets the right parameters, and saves to a different folder. Works perfectly (but slowly) on a Mac G5.
Now I am testing it on a Mac Pro in PS-CS4, the setup he wants to buy, using exactly the same parameters. Trouble is, the window that opens on each document isn't closed, and so they accumulate! Doesn't matter whether Tabs is enabled or not. Starts eating up scratch space and has the potential to open 1000 tabs or windows. Something is wrong.
Same operation works perfectly in PS-CS3 on this Mac Pro.
If the Close Window is missing from this repeating script, then it should be added back -- or a checkbox should be added: "Close each window." I haven't been able to create an Action that will close each window without confusing the Save/Save As mechanism in the script.
How can I report this apparent bug? Or can someone please tell me what I'm missing.
(I know there are other ways to accomplish this task. But this one should work!)

From Kathy: "I still can not find out your issues here. You may try report this to adobe through this link.
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform"
Thank you, Kathy! This was the tip I needed. I thought that Adobe may, indeed, be monitoring this forum. Many manufacturers monitor and post in their own forums, e.g. Apple.
"Also one simple workaround for you, could be create a close action and run this action in Image Processor."
I really did try this. Trouble is, you run into unresolvable interactions with a Save As dialog. I.e. the Close Action seems to interfere with the saving of the converted JPEG. At least I couldn't get it to work -- but it should not be necessary.
There are workarounds, such as selecting multiple items in Bridge, opening them all into ACR, and then selecting them all and clicking Save File. Doesn't open any windows at all! But the bug still needs to be reported.
From Ramon: "Before your frustration causes you to become overly argumentative, you may want to consider that your interlocutor may actually know a bit more than you seem to think she does. Kathy may even be part of the Adobe team, for all you know."
You are reading way too much into what I said. Argumentative? I meant what I said literally. The behavior of the Image Processor script should not have any dependencies, and the documentation (such as it is) indicates none whatever. Further, the script, when run identically in CS3, runs perfectly.

Calling Functions From Import Integration Script

I've got an import integration script that runs fine, however I also have several DataPump scripts that are used in FDM to change specific columns as they come in. I can take the code from the scripts and add to the Import Integration script, but I would rather just call those other functions from the VBScript. I don't see any docs on this, and I'm just wondering if anyone has done this or can describe how I can do it.
Is it possible? Since the standard import scripts reference the strField and the strRecord, can these functions be called from the import integration script?

strField and strRecord are arguments passed by the application to the import function. The represent the field as defined by the import format and the record that is being processed during the import.
Given that, I'm not sure how to answer your question.

Problems with UTL_DBWS calling out a web service.

I´m using ORACLE 10G 10.2.0 and i ´ve downloaded the dbws-callout-utility-10R2.zip utility l´ve unziped it and launched it .
the command loadjava -u SCOTT/passwd -r -v -f -genmissing dbwsclientws.jar dbwsclientdb102.jar ended without errors.
then I gave grant access using the following commands
the environment variable is
$TMPCLASSPATH=$ORACLE_HOME/sqlj/lib/dbwsa.jar:$ORACLE_HOME/jdk/lib/dt.jar:$ORACLE_HOME/jdk/lib/tools.jar:$ORACLE_HOME/sqlj/lib/runtime12.jar:$ORACLE_HOME/sqlj/lib/translator.jar:$ORACLE_HOME/javavm/lib/aurora.zip:$ORACLE_HOME/rdbms/jlib/xdb.jar:$ORACLE_HOME/lib/xsu12.jar:$ORACLE_HOME/jlib/jndi.jar:$ORACLE_HOME/rdbms/jlib/aqapi.jar:$ORACLE_HOME/rdbms/jlib/jmscommon.jar:$ORACLE_HOME/lib/xmlparserv2.jar:$ORACLE_HOME/jlib/orai18n.jar:$ORACLE_HOME/jdbc/lib/ojdbc14.jar
call dbms_java.grant_permission( 'SCOTT','SYS:java.lang.RuntimePermission', 'shutdownHooks', '' );
COMMIT;
call dbms_java.grant_permission( 'SCOTT', 'SYS:java.util.logging.LoggingPermission', 'control', '' );
COMMIT;
call dbms_java.grant_permission( 'SCOTT', 'SYS:java.lang.RuntimePermission', 'setFactory', '' );
COMMIT;
then I created the package running UTL_DBWS .SQL scripts
when I run a test for calling out the web service I got the next error.
ORA-29532: UNCAUGHT JAVA EXCEPTION : Java.Lang.IllegalAccessException: java.lang.ExceptionLnLn
at line
" function create_service_proxy(wsdl_Document_Location VARCHAR2, service_Name VARCHAR2) return SERVICE
as language java 'oracle.jpub.runtime.dbws.DbwsProxy.createService(java.lang.String,java.lang.String) return long' "
name 'oracle.jpub.runtime.dbws.DbwsProxy.createService(java.lang.String,java.lang.String) return long';
Is necessary to install the jpublisher in addition for a sucessfully web service calling out?
what goes wrong?
Thanks for the soon answer.

I have exactly the same problem.
All possible grants are made.
Running as SYS is not functioning as well.
The same installation (the same jar's, the same utl_dbws version, the same database version) does function on two other (developers team's) servers .
The differences are:
Where it functions: Oracle database Enterprise edition on Windows (Windows 7, Vista)
Where it does not function: Oracle database Stadard edition on Unix
I have gone though a decent number of forums and other on-line resources with no success. Solutions available are to grant missing permissions. However these solutions are based on the assumption that under SYS user everything functions properly.
In my case, this does not function even under SYS as SYSDBA.
I will highly appreciate any recommendations!
Best Regards,
Michail
P.S.
Database: Oracle 10.2.0.1 Standard edition installed on Unix

JS CS2 Call out specific image in script

Similar Messages

Maybe you are looking for