JSP, Crystal RAS access passing parameter issue

I am facing some issues with Crystal Report in RAS Server. The reports works fine, when i access the URL with parameters without hiphen('-'). But the same throws an error when i have an hiphen in the parameter value "The syntax of the value for prompt is facilityid incorrect. Please correct the syntax and try again"
My URL is
http://server/businessobjects/viewrpt.cwr?id=33432&apsuser=USERID&apspassword=PASSWORD&apsauthtype=secWinAD&init=ACTX&promptex-departmentid=CMDV&promptex-facilityid=VS-1&promptex-shiftdate=04/28/2009&promptex-dummy=14.727542216333234
The issue is with the parameter value for facilityid VS-1

Thank you Praveen. But, I have done it in a different way.
http://server/businessobjects/viewrpt.cwr?id=33432&apsuser=USERID&apspassword=PASSWORD&apsauthtype=secWinAD&init=ACTX&promptex-departmentid="CMDV"&promptex-facilityid="VS-1"&promptex-shiftdate="04/28/2009"&promptex-dummy=14.727542216333234
I passed the parameter values in double quotes and it is working fine. But now the problem is that the Crystal Report is not refreshing with the latest data. This is the case, even if i uncheck the "Save data with report".

Similar Messages

Syntax to pass parameter value to jsp using href in out.println

Hi,
I have the URL in the form as mentioned below:
<a href="b2c/marketing/showDocDetail.jsp"> <%=doc_no%></a>
I've created the hyperlink using href tag to the document number in the jsp using the below syntax.
<% String a1 = "Document ";
       String a2 = "<a href=\"";
       String a3 = "marketing/showDocDetail.jsp\">";
       String a4 = doc_no;
       String a5 = "</a>";
out.println(a1a2a3a4a5);
%>
When clicked the doc_no is passed to backend RFC and export parameter is retrieved to result.jsp where values along with doc_no are displayed.
the value after clicked is not being passed to action.java class that does the retreival.
Needful, backend class, bom, entry in config.xml is all maintained.
Please help me out with the syntax to pass the parameter value into java class

Hi Bharathi,
try below.
<%
       String a1 = "Document ";
       String a2 = "<a href=\"";
       String a3 = "marketing/showDocDetail.do?docNo=";
       String a4 = doc_no;
       String a5 = " \">";
       String a6 = doc_no;
       String a7 = "</a>";
out.println(a1+a2+a3+a4+a5+a6+a7);
%>
I assume doc_no is java variable contains value of document number
Now create action entry in config.xml file. Suppose "actionDoc.java" class process it.
<action path="/marketing/showDocDetail" type="com.xyz.actions.actionDoc">
               <forward name="success" path="/marketing/showDocDetail.jsp"/>
               <forward name="error" path="/marketing/showDocDetail.jsp"/>
</action>
We are passing parameter docNo=doc_no to action class actionDoc.java in this class you can retrieve request parameter docNo from request object and then process it as you want.
Let me know if you face any problem or error.
eCommerce Developer
Edited by: Ecommerce Developer on Nov 9, 2009 8:35 AM

How to write c# to pass parameter with craxddrt.dll?

any example provided to open crystal report by passing parameter
after add reference craxddrt.dll etc.
for 8.5 report

[Samples|https://wiki.sdn.sap.com/wiki/display/BOBJ/ReportDesignerComponentSDKCOM+Samples].
Also check your Developer Help file...
Adn as Don said, unless you have obtained license for craxDDrt.dll, you are breaking your agreement. Use craxDrt.dll...
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Getting Error in Crystal report While passing parameters (DB: MS ACCESS)

I have been trying to solve passing parameters in Crystal Reports.
What I have done is :
I added Crystal Reports to my project,
I connect to database using OLE DB (ADO) in database expert form (for your kind information; I did not create or add DataSet1.xsd file the Crystal Reports worked on below code with out parameters and I want report with parameter)
I added below piece of code on my form load event
When I try to pass parameter using .SetparameterValue function, report pop up with bunch of values BUT it does not filter with values which I want, Can anyone tell me that Am I missing something strange ? If yes please guide me
Here is images Links : Dropbox - Creport error
First Image shows my crystal report look, second image shows my DB connection and third one shows the error which I am getting while executing below code
Please help me, I've been trying to solve this problem for two months.
Public Class frmrptProducts
   Private Sub frmrptProducts_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
   Dim cryRpt As New ReportDocument
   Dim CrTables As Tables
   Dim crtableLogoninfo As New TableLogOnInfo
   Dim crConnectionInfo As New ConnectionInfo
   'load report
cryRpt.Load(ReportPath & "CRproducts.rpt")
   'parameters definition(if any) This is the part where I pass parameters
   Dim ColourName As String = "White"
cryRpt.SetParameterValue("colours", ColourName)
   'provide connection info. This is important and you can change it as per your db location
   With crConnectionInfo
   .ServerName = My.Application.Info.DirectoryPath.ToString() & "\data\db.mdb"
   '.DatabaseName = ""
   '.UserID = ""
   .Password = ""
   End With
CrTables = cryRpt.Database.Tables
   For Each CrTable In CrTables
crtableLogoninfo = CrTable.LogOnInfo
crtableLogoninfo.ConnectionInfo = crConnectionInfo
CrTable.ApplyLogOnInfo(crtableLogoninfo)
   Next
CRV.ReportSource = cryRpt
CRV.Refresh()
   End Sub

HI Don,
Thanks for replied, I have come up with some different code and it worked,
Please visit this link and let me know if Am I able to get question resolved Pass more than two parameters to Crystal Reports from VB.NET

How to pass parameter from 1 stored procedure to another stored procedure inside crystal report

Hi
I have several stored procedure in my Crystal Report. I am wondering if it is possible for me to pass a parameter to one of the stored procedure and to use the result of that stored procedure E.g. CustomerCode. To another 2 stored procedure to generate the report dynamically?
I have 3 stored procedure
The 1st one is used to gather information and process the calculation
another 2 stored procedure is used for generate the graph and both of them required to take 2 parameters. The 1st stored procedure will require 1 parameter (E.G. Reference Code) and will return a set of information including the data that could be use on the other 2 stored procedures.
After I added these 2 stored procedure, it requires me to pass 3 parameters to the report. I would like to know if I could only pass the Reference Code for stored procedure 1 and use it to retrieve the information for the other 2 parameter?
Thanks in advance
Chi

Hi Chi
To pass parameter from 1 stored procedure to another stored procedure, you will have to create sub report. In your case you will have to create 2 sub reports for 2nd and 3rd stored procedure and link those sub reports with the main report using Reference Code field in order to pass the values.
After creating the report when you will refresh the report, it will ask 4 parameters, one parameter for main report, one for the first subreport and two for second subreport to fetch the data correctly.
Regards
Poonam Thorat.

How to pass parameter to my jsp apge included in adf inlineframe

Hi,
I would like to know how could i pass parameter to my adf inileframe src.
Because when i try to do this
<af:inlineFrame id="if1" source="/frontBackOffice/Scanning.jsp?param0=#{....}&param1=#{....}" />
I have a error
ADF_FACES-30179:Pour plus d''informations, consultez le journal d''erreur du serveur à une entrée commençant par : l''élément UIViewRoot est NULL. Exception fatale lors de PhaseId : RESTORE_VIEW 1
Could you help me please

you map the source to a backingbean.. and in the bean you just manipulate the parameters..
chk this link for an idea - search for af:inlineframe
http://biemond.blogspot.com/2009/02/facebook-adf-task-flow.html
<af:inlineFrame source="#{FaceBook.facebookLoginUrl}"
                     inlineStyle="width:99%; height:99%;"
                     shortDesc="Loginpage"/>
in the bean do this
private String facebookLoginUrl;
public String getFacebookLoginUrl() {
      if (sessionID==null){
        try {
              client = new FacebookJaxbRestClient(APIKEY, SECRET);
              token = client.auth_createToken();
              facebookLoginUrl= "http://api.new.facebook.com/login.php?api_key=" + APIKEY + "&v=1.0&auth_token=" + token;
         } catch (FacebookException ex) {
          ex.printStackTrace();
      return facebookLoginUrl;
}

How to pass parameter to intro.jsp page ?

Hi all,
Anybody please tell me how to pass parameter to intro.jsp page.
Is there any param name defined in <forward > syntax ?
I have made following configuration in struts-config.xml file.
I want to pass parameter to intro.jsp page
<global-forwards>
<forward name="invalidsession" path="/intro.jsp" redirect="true" />
</global-forwards>
please reply soon.
Thanking you.

Hi all,
I have a similar kind of question..
Iam trying to pass a string variable from JSP to servlet thro URL..
Im using tomcat5
COde:
String fname=request.getParamter("filename");
<jsp:forward page="/servlet/coreservlets.filedownload?name=" +fname />
It is generating a unterminated tag error..Please help..

Crystal Report - Parameter issue (advanced dialog box)

In our wpf .net application we view the crystal report, the report prompts for entering 2 parameter values i.e 2 dates and inturn these parameters will be used to generate the crystal report.
The parameter panel on the left has a button (show advanced dialog box). This button should again invoke the same parameter prompt dialog box, so that the user can modify these parameters and the report can be regenerated.
Issue is that when I click on the the button, this generates a null reference exception in the code. The call stack is -
at CrystalDecisions.Windows.Forms.ParameterFieldInfo.get_isDCP()
   at CrystalDecisions.Windows.Forms.InteractiveParameterPanel.ShowAdvancedDialog(ParameterUnit pu)
   at CrystalDecisions.Windows.Forms.InteractiveParameterPanel.pu_ShowAdvancedDialog(Object sender, EventArgs e)
   at CrystalDecisions.Windows.Forms.ParameterUnit.OnShowAvancedDialog(EventArgs e)
   at CrystalDecisions.Windows.Forms.ParameterUnit.editControl_ShowAdvancedDialog(Object sender, EventArgs e)
   at CrystalDecisions.Windows.Forms.ParameterValueEditControl.OnShowAdvancedDialog(EventArgs e)
   at CrystalDecisions.Windows.Forms.ParameterValueEditControl.btnShowAdvancedDialog_Click(Object sender, EventArgs e)
   at System.Windows.Forms.Control.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ButtonBase.WndProc(Message& m)
   at System.Windows.Forms.Button.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Please note, I used the .net reflector to debug the crystal report dll , the isDCP method looks like -
public bool isDCP
      get
        return (this.Attributes.Contains("IsDCP") && ((bool) this.Attributes["IsDCP"]));
Looks like the attributes value is null.
Please let me know your comments. Am I missing something while getting the report in the frontend.
I use crystal reports 2008 sp 2 (also note that my gac contains different version of crystal reports (cannot remove them - tried it) , with windows server 2003. I use web service with proxy to get the report from the local server.
Note I also tried to create sample application in which I specify the local path to reports source , this works. However when I tried to use webservice, i was getting soap exception.
Please let me know how solve above issue

So you found the Report Design forum, if you looked down one more you would have found the SDK forum, SDK stands for Software Development Kit if you did not know.
Or did you not mention you get the same error when you run this report in CR Designer, if so then you were in the right forum.
Try Service Pack 3 also
Move to the SDK forums.

Issue on How to mimic Deski document from CMS to local machine, pass parameter, execute and save in a mutiple report format then store in a network drive.

Post Author: usaitconsultant
CA Forum: JAVA
Would you know if there's a way to mimic Deski
document from BOXI server(CMS) to local machine, pass parameter, execute and
save in a mutiple report format then store in a local drive or network
drive? Most examples and tutorials in BO XI R2 I've seen are scheduling while drilling report is for web intelligence only and not desktop intelligence. Please let me know your ideas. I would really appreciate your help. Thanks.

Post Author: usaitconsultant
CA Forum: JAVA
Hi Ted,
Thanks for the reply.The file is not available in the server. Though, I checked CMS and I found an instance in history tab and the status is failed with error below.
Error Message:
A variable prevented the data provider Query 1 with BANRRD30 from being refreshed. (DMA0008).When I checked my codes, I found out that the object Im using is for web intelligence data provider. However, I cannot find any documentation and example for passing parameter values in desktop intelligence data provider. Any idea on this? You think this is not suported by Report Engine SDK?Thanks.

Error while passing parameter in Oracle Jdeveloper

Hi All,
I was passed Crystal report viewer object From Servlet it is Running fine but one problem in that while passing parameter from that page to data base it is not supporting (The ok Button on page).
can any one tell me how to find Action Button (.Jsp page)
Because i am using .jsp page That was made in CR4E
in that i found only jsp code I have not get how to work Action of that button
Also another problem while making Viewer.jsp pge ..rpt-Crystal reports--->>Create Viewer Jsp->>Insert CrysatlReport viewer API code------->>>1.Connectparameterinthat report 2.connect the crystalreportPageViewer while makin this page i was running on Apache tomcat Server it is not displaying Anything only Displaying Blank Browser
Can Any one help me...
Sincerly
Amol

For your first question can you please be a little more clear as to what you are referring to? I am not familiar with an action button for the parameter pages.... what I can tell you is that we don't have any jsp code for the viewer controls, all of that is generated dynamically at runtime. We do have a viewer SDK that you can use to set properties on the viewer; information about this can be found in the [Developer Library|https://boc.sdn.sap.com/developer/library] in the Viewer SDK documentation book.
For your second question, I assume you are referring to generating a viewer page from a report in Crystal Reports for Eclipse. You will need to uncomment the viewer code (for some reason when the page is generated, the viewer code has block comments surrounding it). You will probably want to make sure the parameter code is uncommented as well.
In addition to this, there is a helper file called JRCHelperSample.java that contains all of the helper methods for the automatically generated viewer page. This can be modified in whatever way you wish to suit your needs.

Crystal Runtime exception: Missing parameter values

Our company did a PeopleTools upgrade at one of our clients recently. We upgraded them to PeopleTools 8.50.08. We had to convert all the Crystal Reports to the 2008 format using the RPT converter which is included in the Client install of PeopleTools.
The only problem now is that a lot of the Crystal processes in PeopleSoft are failing with the following error:
Crystal Runtime exception: Missing parameter values.
I've checked the parameters which are being passed to the report and I see both parameters are filled:
E:\HR881\BIN\CLIENT\WINX86\PSCRRUN.EXE -CTORACLE -CDHRMKPDEV -COPSDUT -CPOPRPSWD -I218609 -RP"PUP202K" -OT6 -OP"G:\PS\PSPRCS\log_output\HRMKPDEV\CRW_PUP202K_218609" -LGDUT -OF2 -ORIENTL "2000-10-01" "2002-06-30"
Database type is Oracle. HRMS version is 8.8. I can run the Query which gets the data in just fine and I can also run the report from Crystal fine. This only happens with Crystal reports which have a date field as a parameter/prompt in the report.
There's currently an SR open at Oracle, but I was hoping that someone here can help me nail this issue. I'm not too happy with the quallity of Oracle support, but that's a whole different story.

<s>Just to be sure, did you put a space after each parameter name or is it a typo over here ?
E:\HR881\BIN\CLIENT\WINX86\PSCRRUN.EXE -CT ORACLE -CD HRMKPDEV -CO PSDUT -CP OPRPSWD -I 218609 -RP "PUP202K" -OT 6 -OP "G:\PS\PSPRCS\log_output\HRMKPDEV\CRW_PUP202K_218609" -LG DUT -OF 2 -OR IENTL "2000-10-01" "2002-06-30"</s>
Nicolas.
sorry, it was wrong assumption.
Edited by: N Gasparotto on Jun 2, 2010 5:11 PM

How to pass parameter as http POST in pageContext.setForwardURL

Hi,
I need to call a third party application page in my custom OAF page. I need to pass parameter to this third party page using POST method. I am using following command to call that -
HashMap hm = new HashMap();
hm.put("FirstName",firstName );
hm.put("LastName",lastName);
hm.put("AppSignature", signature);
pageContext.setForwardURL(hopURL,
null, // not necessary with KEEP_MENU_CONTEXT
OAWebBeanConstants.KEEP_MENU_CONTEXT, // no change to menu context
null, // No need to specify since we're keeping menu context
hm, // request parameters
false, // retain the root application module
OAWebBeanConstants.ADD_BREAD_CRUMB_YES, // display breadcrumbs
OAException.ERROR);
I am passing parameter to the page using hash map table. That application is expecting the parameters in POST format and I believe using hash map table the parameters will be passed as GET format.
We figured that out because one of the parameter we have to send is AppSignature which is 160 characters long. When third party applicatoin received that parameter they got only 151 characters, looks like they are truncated by GET method.
Any idea how to pass parameter using POST format so that this issue could be fixed.
Regards
Hitesh

Sumit,
Thanks for your reply. I have resolved this issue by forwarding all parameters in session using pageContext.putSessionValueDirect and redirect to a jsp using pageContext.redirectImmediately.
in jsp I read the params from session and set in the form , and then redirected to my third party application.
Regards
Hitesh

UPDATE: Pass Parameter from Form to Form While on Seperate Pages

I'm running 9iASR2 on Linux
My issues is that In need to Take a Parameter entered on Form1 one a page then upon click of insert I need to pass a parameter entered into that form and naviagate to another page containing 2 portlets 1 being another form and 1 being a dynamic page both of the portlets on the second page need to beable to access the parameter.
Since my last post I updated the PL/SQL code to better fit the situation and now have a different problem.
Ok.. So I'm still attempting to do the same thing a about. Here what I tried and the outcome.
1. I put following code in the succeful submission pl/sql procedure of the first form(the calling form).
What a suspected the follow code to do was navigate to the page containing my other from in a portlet. Which it did. Cool!
declare
url varchar2(220);
v_FLOWNAME varchar2(220);
begin
v_FLOWNAME := p_session.get_value_as_VARCHAR2(
p_block_name => 'DEFAULT',
p_attribute_name => 'A_FLOWNAME');
url:='http://ebalpha3.us.oracle.com:7778/portal/page?_pageid=36,31629&_dad=flowmanager&_schema=PORTALSCHEMA&a.FLOWNAME='||v_FLOWNAME;
call(url);
end;
2. It passed the follow URL http://ebalpha3.us.oracle.com:7778/portal/page?_pageid=36,31629&_dad=flowmanager&_schema=PORTALSCHEMA&a.FLOWNAME=MyFLow
3. In the accepting form I input the following code in the before displaying the page section of the the form.
declare
FLOWNAME varchar2(200);
begin
FLOWNAME := portalschema.wwpro_api_parameters.get_value('FLOWNAME','a');
p_session.set_value(
p_block_name => 'DEFAULT',
p_attribute_name => 'A_FLOWNAME',
p_value => FLOWNAME);
end;
What I expected it to do is take the a.FLOWNAME from the url and input it into the FLOWNAME variable, but the FLOWNAME variable came across as blank and the FLOWNAME text area came accross as blank because the FLOWNAME parameter was never pulled.
What do you think?
Thanks for you help!

I have a similar problem where I have a portlet X which accepts parameters using the <passAllUrlParams>true</passAllUrlParams> tag in the provider.xml and it works if portlet X is directly on page A. However, because I need to wrap portal security around this portlet declaratively, I will need to apply security on this page A and then publish page A as a page portlet Z, then drop page portlet Z on another page, page B. (I hope you all been through this before to apply security around a portlet). By doing this - the parameters are no longer being passed into portlet X anymore.
To get around this - I will need to define page parameters for page A and map them to portlet X via the "Parameters" tab in edit mode and then define the same set of page parameters on page B and map them to the page portlet Z just to get the parameter passing working and flowing through to portlet X.
Is there anyway around this?
Do we always need to define page portlets in 10.1.4?
What does the <passAllUrlParams>true</passAllUrlParams> tag do in 10.1.4?
In 10.1.2 - the <passAllUrlParams>true</passAllUrlParams> tag was all you need to pass any number and type of parameters from a page B->page-portlet Z->portlet X
This feature seems to be missing in 10.1.4.
Please respond.
Thanks
Stanley

Pass Parameter from Form to Form While on Seperate Pages

I'm running 9iASR2 on Linux
I know there are allot of postings on Passing parameters and I'd hate to bring it up again, but I've been attempting this for a few days now and can't seem to figure it out.
My issues is that In need to Take a Parameter entered on Form1 one a page then upon click of insert I need to pass a parameter entered into that form and naviagate to another page containing 2 portlets 1 being another form and 1 being a dynamic page both of the portlets on the second page need to beable to access the parameter.
I am abable to pass the parameter between the forms when not running in a portlet with the code below.
declare
url varchar2(220);
v_FLOWNAME varchar2(220);
begin
v_FLOWNAME := p_session.get_value_as_VARCHAR2(
p_block_name => 'DEFAULT',
p_attribute_name => 'A_FLOWNAME');
url:='portalschema.wwa_app_module.link?' ||
'p_arg_names=_moduleid&p_arg_values=1082756362' ||
'&p_arg_names=_show_header&p_arg_values=NO' ||
'&p_arg_names=FLOWNAME&p_arg_values=' || v_FLOWNAME;
call(url);
end;
Thanks for You Assistance!

FRM 41213 : unable to connect to the report server repsrv+
Look at this ....
Did u created the report server from the command prompt
If yes
Did u started the report server
if not
use this from the command prompt
rwserver server = yourservername start

Access Context Parameter in Java Bean.

Hi,
I want to access the Context parameter set by the web.xml from a java bean or simple java class. For example, If I have database connection details in my web.xml and I want to get these in a Java Bean of a class which will pick up the values and create a Connection object and return to the guy calling it, either JSP or servlet.
I have a idea of using InitialContext class. But I doubt it works for
Context parameter defined in the web.xml.
It worked if I use like this for DataSource object which is created in my application server.
Context ctx = new InitialContext();
DataSource ds = (DataSource)ctx.lookup("OMSDataSource");
return ds.DatabaseConnection.getConnection();
So how can I access a parameter like this..
<context-param>
<param-name>Webmaster</param-name>
<param-value>[email protected]</param-value>
</context-param>
Cheers.
L G Goundalkar

Greetings,
Hi,
I want to access the Context parameter set by the web.xml from a java bean or simple java class.The bean doesn't have direct access to the context object so that access must to supplied to it - i.e by calling getServletContext() and passing the resulting reference to the bean.
For example, If I have database connection details in my web.xml and I want to get these in a Java
Bean of a class which will pick up the values and create a Connection object and return to the guy
calling it, either JSP or servlet.Why not write a DAO to handle the JSP or servlet's access needs? The DAO can be initialized at application start with a context listener and the initialized instance placed in the context where the JSP or servlet can get it directly. ;)
I have a idea of using InitialContext class. But I doubt it works for Context parameter defined in the
web.xml.Not for context parameters (a different "space" from the JNDI namespace ;). But, of course, it does work for "environment entries" which may also be placed in the web.xml DD (er, presuming your web container supports JNDI, of course).
Cheers.
L G GoundalkarRegards,
Tony "Vee Schade" Cook

JSP, Crystal RAS access passing parameter issue

Similar Messages

Maybe you are looking for