JSP does't load fully in IE
Hello everybody,
Strange problem...i am having problem in loading my JSP in IE. It loads completely in netscape and the page gets displayed. But in IE it loads only part lets say 8k(in my system) or 16k(in some other systems). I dont understand what could have been wrong?
would be grateful if somebody could help me.
thanks in advance,
vamsi.
My guess is that there may be some exceptions thrown by your JSP. Please check it.
Hafizur Rahman
SCJP
Similar Messages
-
From this monday suddenly, one of our heavily used web pages is having strange problem in IE. The jsp doesn't load fully. When I check the view source, it only shows half of its source.
I checked with Operations to see if the added any patch. They didn't. Also, checked with DB team and Application server team. No one has done anything.
Strange is, the page loads in firefox. Let me know if you guys have any suggestions. Thanks,
Maddy.When a JSP catches an exception it tries to forward to an error page that will generally show the exception stacktrace that was thrown.
However, forwarding or redirecting only works when data hasn't been flushed to the browser yet. This creates the problem that when an exception occurs AFTER data has been flushed (this will happen automatically when the output buffer becomes full), you only get half the output.
Check the logfiles of your webserver, I'm sure that it has the exception that is being caused. -
Firefox does not fully load Barclaycard Authentication site. It loads as far as asking for certain letters in my pasword but does not load the "Submit" button so I cannot continue with my purchase and have to switch to IE8 browser to purchase anything over the internet. Any clues?
== This happened ==
A few times a week
== Couple of weeks agoYour UserAgent string in Firefox is totally messed up by another program that you installed, and Barclays doesn't know you are using Firefox 3.6.6 - it probably looks like IE 6.0 to that website.
[http://en.wikipedia.org/wiki/User_Agent]
type '''about:config''' in the URL bar and hit Enter
''If you see the warning, you can confirm that you want to access that page.''
Filter = '''general.useragent.'''
Right-click the preferences that are '''bold''', one line at a time, and select '''''Reset''''',
Then restart Firefox -
JSP / HTML page does not load correctly in IE
I have a particular jsp page, which has heavy volume of data and it does not load completely in IE, but loads perfectly in Firefox and Safari.
It is a really perpleximg problem that occurs only when the volume of data is large. None of the people in my team were able to solve this issue.
Please send in your suggestions as to why this is happening or if there are any known bugs in IE.
In case you need an HTML version of the code, please do mail me at [email protected]Jaison_Sabu wrote:
I have a particular jsp page, which has heavy volume of data and it does not load completely in IE, but loads perfectly in Firefox and Safari.
It is a really perpleximg problem that occurs only when the volume of data is large. Why would you be sending large amounts of data to a JSP? Sounds fishy to me.
None of the people in my team were able to solve this issue.Well if you provided your team with the same amount (none) of information you provided here, then I would understand.
Please send in your suggestions as to why this is happening or if there are any known bugs in IE.Personally, I think it's the flux capacitor.
In case you need an HTML version of the code, please do mail me at [email protected]
Hope you're ready for some spam. -
Michael's Weekly Ad does not load in Firefox, but it loads in Internet Explorer
My wife and I have different computers, and she is interested in many ads for craft stores and the like. As such, she's been telling me how the Michael's Weekly Ad (http://weeklyad.michaels.com) does not load on her computer. Just for a kick, I thought I'd try it on mine, fully expecting it not to load, but then it did. I have double-checked everything I can think of; I have completely updated her add-ons (which turned out to be useless anyway because after disabling ALL of mine, the ad still loaded), I checked to make sure our version of Firefox match, and I have tried using search engines (Google) to locate any similar problems to no avail. Is there any explanation available (and ideally fixing whatever is wrong)?
A lot of content on that page is loaded via JavaScript, so she may be blocking some scripts on that page if it sin't displaying prolerly.
If you use extensions (Tools > Add-ons > Extensions) like <i>Adblock Plus</i> or <i>NoScript</i> or <i>Flash Block</i> that can block content then make sure that such extensions aren't blocking content.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
ConnectionFactory - who does the load balancing
Consider creating a connectionfactory (with server affinity unticked, load balancing
ticked and using the message delivery policy of round robin) we then go on to
create a distributed domain targetted at the cluster of two managed server's (managed1
and managed2)
If I create a simple java app that put's messages to that distributed destination,
using the connectionfactory above, who's responsible for doing the load balancing.
Does the client create the session knowing that the connectionfactory requires
load balancing and thus takes the responsibility for it, or does the client just
put a constant stream of JMS messages to the WLS and the connectionfactory class
takes responsibility for the load balancing
Who maintain's the delivery state, the client application or WLS (i.e who's job
is it to look up the last messages queue destination?)
Hi Barry,
A JMS client's produced messages are first delivered to the WL server
that hosts the client's JMS connection. The JMS connection
host remains unchanged for the life of the connection.
Once produced messages arrive on the connection host,
they are load balanced to their JMS destination.
For more information I suggest reading the clustering
sections of the JMS Performance Guide white-paper. You can find
the white-paper here:
http://dev2dev.bea.com/technologies/jms/index.jsp
Tom Barnes
Barry Myles wrote:
> Consider creating a connectionfactory (with server affinity unticked, load balancing
> ticked and using the message delivery policy of round robin) we then go on to
> create a distributed domain targetted at the cluster of two managed server's (managed1
> and managed2)
>
> If I create a simple java app that put's messages to that distributed destination,
> using the connectionfactory above, who's responsible for doing the load balancing.
>
> Does the client create the session knowing that the connectionfactory requires
> load balancing and thus takes the responsibility for it, or does the client just
> put a constant stream of JMS messages to the WLS and the connectionfactory class
> takes responsibility for the load balancing
>
> Who maintain's the delivery state, the client application or WLS (i.e who's job
> is it to look up the last messages queue destination?)
>
>
>
>
-
My g mail does not open fully on firefox but does on IE despite reloading Firefox again
I have noticed I cannot fully load g mail from one particular notebook running firefox 3.6.10. It loads fully from other computers and allows me to logon. It does load on the machine in question if I use Int Expl.
I have uninstalled it and reloaded but the problem persists. This is a recent development as it ran well for months before without any issues. I have also cleared the cache, temp files etc
Please can someone assistJazcan,
Thx for the references. It appears that the solution may be to UNCHECK "Send to this recipient in Microsoft rich text format" checkbox in OUTLOOK. But, we are unable to find this checkbox. Any guidance on where it might be in OUTLOOK?
Mike T in Va. -
JSP does not call the right method in controller class
Hi all,
I have a jsp file which loads a page at this address: http://localhost:8080/dir/list/
I've added two checkboxes to the page; user can check both checkboxes, only one or none. Following is code I have in jsp file:
<form class="checkboxForm">
<c:choose>
<c:when test='${newItems==true}'>
<input id="newItems" type="checkbox" value="#" name="newItems" class="checkbox2" checked="checked" /><strong> New Businesses </strong>
</c:when>
<c:otherwise>
<input id="newItems" type="checkbox" value="#" name="newItems" class="checkbox2"/><strong> New Businesses </strong>
</c:otherwise>
</c:choose>
<c:choose>
<c:when test='${rejectedItems==true}'>
<input id="rejectedItems" type="checkbox" value="#" name="rejectedItems" class="checkbox3" checked="checked"/><strong> Rejected Businesses </strong>
</c:when>
<c:otherwise>
<input id="rejectedItems" type="checkbox" value="#" name="rejectedItems" class="checkbox3"/><strong> Rejected Businesses </strong>
</c:otherwise>
</c:choose>
<a href="#" onclick="apply();">
<button name="apply" class="btn-primary" value="Apply" tabindex="4">Apply</button>
</a>
</form>
<script type="text/javascript">
function apply(){
var newItems = document.getElementById("newItems").checked;
var rejectedItems = document.getElementById("rejectedItems").checked;
alert("Inside apply() method.");
alert("newItems= " + newItems + ", rejectedItems: " + rejectedItems);
window.location = "<c:url value='/list/'/>" + newItems + "/" + rejectedItems;
alert("window.location= " + window.location);
alert("Add extra delay!");
return false;
</script>This is my Controller class:
// Method1: this method gets called when the user loads the page for the first time.
@RequestMapping(value="/list", method = RequestMethod.GET)
public String list(Model model, HttpServletRequest request) {
System.out.println("Controller: method1: Passing through...");
model.addAttribute("newItems", Boolean.TRUE);
model.addAttribute("rejectedItems", Boolean.TRUE);
// Does other things.
// Method3: this method gets called when user checks/unchecks one of the checkboxes and clicks on Apply button.
@RequestMapping(value="/list/{newItems}/{rejectedItems}", method = RequestMethod.GET)
public String list(@PathVariable Boolean newItems, @PathVariable Boolean rejectedItems, Model model, HttpServletRequest request) {
System.out.println("Controller: method3: Passing through...");
model.addAttribute("newItems", newItems);
model.addAttribute("rejectedItems", rejectedItems);
// Does other things.
}The way my jsp code is written now, it calls the correct method and displays the correct url. When page loads for the first time, it calls method1 and the url is:
http://localhost:8080/dir/list
When the user checks/unchecks one or both checkboxes and clicks on apply button, method3 is called and this url is displayed:
If both checkboxes are checked which both booleans are set to true:
http://localhost:8080/dir/list/true/true
Everything is fine... however, if I comment these two lines at the end of JavaScript apply() function,
alert("window.location= " + window.location);
alert("Add extra delay!");Then method3 will never gets called; only method1 gets called and I see this url:
http://localhost:8080/url/list//?newItems=%23&rejectedItems=%23&apply=Apply
I do not know why it gets confused bet. method1 and method3 and cannot pick the right method?
I tried to use the POST method instead, but the page goes directly to our internal error page and it never reaches the method I wrote in my controller for POST:
I don't really know what I'm doing wrong? Any help is greatly appraciated.
Edited by: ronitt on Dec 13, 2011 2:35 PMI changed the <form> in the jsp to div and its working fine. I do not need to have comments in JavaScript funcion() anymore. I don't know why that made the difference though? According to:
http://www.w3schools.com/tags/tag_form.asp
The <form> tag is used to create an HTML form for user input.
The <form> element can contain one or more of the following form elements:
<input>
<textarea>
<button>
<select>
<option>
<optgroup>
<fieldset>
<label>
An HTML form is used to pass data to a server.
I do have <button> and also send the data - the value of checkboxes - to server. So I think it should also work with <form>.
Please let me know if you have any idea. Thanks. -
Firefox 33.1 does not load Adobe Flash Player 15.0.0.223
As far as I can determine, Firefox 33.1 does not load Adobe Flash Player 15.0.0.223 (identified on the Plug-ins list as "Shockwave Flash 15.0.0.223") when I access most of the pages on the MSN website. Whether it will display any specific video is unpredictable but it displays about one out of five.
If I place the mouse cursor on the blank black video display area (for which no controls or buttons are displayed), and click the right mouse button, then either (1) the context menu is the same as for clicking the mouse cursor on an empty part of the page, or (2) the context menu is not displayed at all.
Apparently, Firefox has failed to load the plug-in, but does not display any error message. Neither is there any error message displayed by the plug-in.
If you think I am willing to undertake a trial-and-error odyssey through various "do this and see what happens" recommendations in "Knowledge Base" articles and the like, then think again. I don't have the time to make the effort, and I will use Internet Exporer instead. It ought to work with MSN just fine. :-)
Since I did not develop Firefox, this is not my problem to solve. It's your software, not mine, and I didn't make the mistakes, so you fix it.
By the way:
Either Firefox Help does not display the version correctly, or your Troubleshooter doesn't obtain the data correctly. Help says version 33.1 and Troubleshooter says 33.0. YES I KNOW THAT FIREFOX 33.1.1 IS AVAILABLE. SO WHAT?
Troubleshooter also identifies the Shockwave Flash plug-in as "15.0 r0" but the native Add-ons feature identifies it as 15.0.0.223 -- which is the version that Adobe uses.
The last line of the Troubleshooter's "educated guesses" just has "* 5.1.30514.0". I have no idea as to what that refers to and I doubt that anyone else would have one either.
Well, maybe those numbers are good enough for "educated guessers" but in my experience computers do not make "educated guesses" even if software developers do.
Enjoy!Please refrain from posting scattergun boilerplate suggestions.
Please post specific instructions that will resolve the problem. If you don't know why the problem occurs and how to remedy the problem, then don't bother.
Realize that the problem did not occur with the previous version of Adobe Flash Player, but began after it was updated to 15.0.0.223. So it is is apparently specific to that version, and it may reflect a flaw in Adobe Flash Player. There's no way to actually report it to Adobe. Posting a report in their "user forum" just produces replies like the one that you have posted in reply to my OP, so what is the use?
Evidently you presume that Firefox does not have a bug, that something else doesn't work and you may be right. However, if Firefox does have a bug, then nothing that you have posted will correct it, and experimenting according to your boilerplate will be nothing but a waste of time and effort.
Again, the problem is not that Adobe Flash Player 15.0.0.223 does not run, but that it does not run when I attempt to view most of the videos on MSN. It does display videos from YouTube and other websites with an occasional specific exception. If the failure occured on more websites, and with all MSN videos, then maybe your suggestions for investigating it would have more merit.
For what it is worth: the problem occurs in Firefox Safe Mode and without Firefox Safe Mode. Disabling or enabling any extensions or other plug-ins has no effect.
I established that while investigating why Firefox 33.1 started producing crash reports every time that it initially displayed the New Tab page when I visited MSN (Firefox 32 did not do that). I also checked whether the actions that I took to troubleshoot that behavior affected Adobe Flash Player on MSN. They didn't.
Apparently the crash reports occured because Firefox could not find or could not load the "thumbnail" images for website pages that I had previously seen (they are often deleted by ''CCleaner''). The crash reports stopped after I made a couple of changes to the configuration for the ''SandboxIE'' sandbox in which I run Firefox.
Frankly, Firefox "Safe Mode" is something I don't need, because I run Firefox in a ''SandboxIE'' sandbox, which is a much more comprehensive security measure than anything implemented by any specific application. At the moment I don't recall whether Firefox Safe Mode is enabled, although I probaby re-enabled it after disabling it during the crash-report investigation. But it didn't make any difference with regard to Adobe Flash Player in that context, so there's no reason to repeat it. -
IE 11 Does not load pages and "Stops Responding" After 11/26/2013 Windows Update
I have Windows 7 Pro 64 bit. IE 11. (Doesn't matter if I try to open 32 or 64 bit IE)
I keep Automatic Updates on and they install as soon as they are available.
Everything on my PC was running fine 11/25/13.
I came to it 11/26/13 after Windows Updates ran and now whenever I open any webpages, it does not load the web page 100%, no hyperlinks can be clicked on and once you attempt to click on anything. I get the "IE 11 has stopped responding" bubble.
It also seemed to affect Firefox which does not completely load pages either.
Any shove in the correct way to help solve this would be helpful.Robert -
Anyone who has gathered over 13,000 points is certainly to be respected as being super smart and uber helpful. However, your response is inadequate on two counts.
First, "stopped working" is not an inexact phrase, nor is it a euphemism trotted out by a newbie who hasn't the skill to describe the problem accurately. "stopped working" is an exact part of the error message issued by Windows. Of course it would
help if Windows would issue error messages that are more useful, but that is a different issue. For the purposes of this discussion, "stopped working" as part of the exact error message is a useful piece of information.
Second, despite your excellent suggestions for hunting down the problem, I'm guessing that few people here have the time or inclination to be beta testers for Microsoft. Even if the exact cause is found, it is not likely that anyone here will
be able to fix the problem. There are literally hundreds of people complaining about this problem in multiple forums. If you know your consumer behavior metrics, then you know that means tens of thousands are affected. This is systemic, not
a random problem on a few errant machines. Microsoft needs to know that they have a major problem on their hands and they need to fix it. I saw this problem starting with IE 10. Is it any wonder that in that time, IE usage has fallen greatly
while Chrome has become the dominant browser? (The only reason I am bothering to write instead of just shifting to Chrome is that Chrome also has its bugs, one of which affects a web app I use several times a week, so I need a functioning version of
IE.)
So thanks Robert for all your help in the past, but this response isn't helpful.
Microsoft, are you listening? Fix your browser. -
Image does not load in application
Hi:
I read about the following in a loading image tutorial:
"The getImage methods return immediately, without checking whether the image data exists. The actual loading of image data normally doesn't start until the first time the program tries to paint the image. "
Basically, I am using the
Image img = Toolkit.getDefaultToolkit().getImage(path);I've also overwritten the paintComponent()method
public void paintComponent(Graphics g)
super.paintComponent(g);
g.drawImage(image, 0,0, myWidth, myHeight, this);
}Then, I included the above code in a JPanel, which is further included in a JInternalFrame. But somehow, the image just doesn't load, the tutorial says, the image does not load until the FIRST TIME PROGRAM PAINTS THE IMAGE. How do I make the program paint the image??
Thanx a lotCheck out ImageObserver, Component.prepareImage() and MediaTracker.
-
Iceberg reader will not load fully, it comes up with a blank white page. How am i ment tonread my books?
If not is there anyway i can get a refund to buy the books on ibooks?Soapie wrote:
Iceberg reader will not load fully, it comes up with a blank white page. How am i ment tonread my books?
If not is there anyway i can get a refund to buy the books on ibooks?
The only Iceberg app I can find in the app store is a social networking app, not an e-reader. I don't see how you could buy books for it.
UPDATE: I see that it isn't available in the US app store. To contact the developer find it in your App Store and there will be a link to the developer's support site. -
Site does not load after some minutes of creation or after restart the server
Hello,
I have been asked to create a test enviroment identical to the production enviroment. So, what I did was:
Backed up the production web application's content database: Prod_WSS_ContentDB
Created new test servers (domain controller, sql server and sharepoint 2013 server) in a new, completely isolated, network environment, without any connection with the production environment (specifically Azure)
Created a new web application in test environment with a new content database.
Dismounted the new content database with powershell: Dismount-spcontentdatabase Test_WSS_Content
Copy the Prod_WSS_ContentDB database to the test sql server and restored it with Management Studio.
Mount the Prod_WSS_ContentDB databe to the web application with powershell:
Mount-spcontentdatabse Prod_WSS_ContentDB -WebApplication http://testsp/
Then, when I type http://testsp in the browser it redirects me to http://testsp/SitePages/Home.aspx
and the site loads exactly as the production environment.
But, after some minutes, or if I restart the Sharepoint Server, when I navigate to
http://sitesp I am redirected to http://testsp/SitePages/Home.aspx
as expected, but the site does not load, the browser just show a complety blank page.
The Central Administration site loads normally.
Trying to fix it I found that if I dismount the content database Prod_WSS_ContentDB, then mount the test database Test_WSS_Content,
then navigate to the site, dismount Test_WSS_Content and finally mount again Prod_WSS_ContentDB, the site loads normally, no blank page, but after some minutes or if I restart the same happens again.
For the error event I receice in event viewer it seems that the problem is related to database. I have not found a solution for this error... How can I solve this?
The error is:
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 6/27/2014 2:44:22 PM
Event ID: 5586
Task Category: Database
Level: Error
Keywords:
User: UCETEST\spaccount
Computer: TESTSP01.ucetest.edu.do
Description:
Unknown SQL Exception -2146893055 occurred. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>5586</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-27T14:44:22.743159500Z" />
<EventRecordID>4742</EventRecordID>
<Correlation />
<Execution ProcessID="1688" ThreadID="1692" />
<Channel>Application</Channel>
<Computer>TESTSP01.ucetest.edu.do</Computer>
<Security UserID="S-1-5-21-2552298216-324766354-3392103171-1108" />
</System>
<EventData>
<Data Name="int0">-2146893055</Data>
<Data Name="string1">A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)</Data>
</EventData>
</Event>
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, ConfiguringHi,
According to your post, my understanding is that Site does not load after some minutes of creation or after restart the server.
Please make sure you create a test environment for existing production site correctly.
Here are some great articles for your reference:
Moving content between SharePoint environments
Copy SharePoint production data to a test environment
Build a SharePoint 2010 Test/Development Farm
Best Regards,
Linda Li
Linda Li
TechNet Community Support
Hello Linda Li,
I follwed that steps to create my test enviroment... and I have recreated it some times using that same steps, but the problem persits. After some minutes or after I restart the SharePoint server the site does not load.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring -
When I type a new URL in the address bar (or location bar), and I either type the complete URL or select from the drop down list, nothing happens. I hit enter, and the website does not load in the current tab, new tab nor in a new window. Exactly the same when I hit the green arrow to the right of the address bar. I am using Firefox 8, and all my add-ins are up to date.
It has been working before. The setting to get Firefox to open new pages in a new tab from the address bar is there, so it should open a new tab. But I get nothing at all!
Please help, how can I fix this?
Thanks,
James.That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?
Same issue here, previously did work perfectly
Maybe you are looking for
-
I received a message on my iPhone saying that some charges could be applied due to activiation of iMessage. My question is: why have I been charged now, if I had already activated iMessage and I have been using it for more than a year.
-
Fillable PDF Email Returned as XML ???
I have Adobe Acrobat 7 Pro. When I create a fillable PDF and then email it, once the person completes it and it comes back not as a PDF but as an XML document. Is there a way I can change this to were it will return as a PDF file as well to save me t
-
My Macbook Air failed the cable connection between Monitor and Mainboard
When I just got accident with this macbook air version 2008, It still working but after one week the screen got the blue color but The Mac OS still working. Now I want to contact with the technician of Apple to help me get the price and solution for
-
Usage of Transaction Control Extension
Hi there, is the PA Transaction Control Extension (PATCX) only good for EXTENDING Transaction Controls, or can it also be used to REPLACE Default Transaction Controls? Regards Nils
-
Anyone find a fix for this? Most programs installed invoke this error. The system extension "/System/Library/Extensions/ZD1211Mac.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an up