JTable appears on maximizing Frame

The JTable does not appear till I resize the frame.
Relevant Points:
1. I am using a TableModel which extends AbstractTableMode to fetch the data for the JTable.
2. The JTable is being added to the JScrollPane. And the JScrollPane is being added on the JPanel.
I have worked on it for a quite a while and cannot figure out why should the JTable be displayed only if the window resizes.

hi,
it looks like a repaint problem.
did you call validate() or repaint() or both on the JFrame after adding the jtable?

Similar Messages

  • I downloaded Lightroom CC through the creative cloud where I have a paid plan, everything works except that when I click on it Develop instead of appearing the photo you want to work, appears a blue frame ..like to help me with this problem

    I downloaded Lightroom CC through the creative cloud where I have a paid plan, everything works except that when I click on it Develop instead of appearing the photo you want to work, appears a blue frame ..like to help me with this problem

    thanks a lot Jim..its work ..problem solved

  • Long clip only appears as one frame in Project Story Board

    My Imovie project only appears as one frame in Project Story Board. How do I get it back to an extended, multi-frame project so I can work on it?

    In the Project Browser? There's a scale slider in the lower right which will let you zoom in. Is that what you mean?

  • Pixels appear every 1 frame between 13 frames last about 15 sec

    I got master which is HD 1920 x 1080 prores then convert it to 720 x 480 widescreen then compressing it to m2v. Notice pixels appear every 1 frame between 13 frames last about 15 sec on m2v. Why is that? Is there other compressor program than apple compressor. I use Compressor 3.5.3.

    YOu don't need to do that first compression. Just take your HD output into Compressor and use the DVD presets.  Your method is adding a compression step that is unnecessary, and might be the cause of those issues.

  • Why do black lines appear to invisible frames when I print from a pdf and how do I stop it?

    As an indesign newcomer I am frustrated to find that occass
    ionaly when I convert the artwork into a pdf to pri
    nt I get a thin black line ap
    pering where the edges of the invisible frame must be. What causes this and how c
    an I eliminate it. The frustration is compounded as it will appear in different places at
    different times.

    Xerox 7346 Print Drivers
    The very first one is the Mac version you want. READ THE INSTRUCTIONS about closing print set up window.
    If you're on a PC, just scroll down to your OS (it's the box to the top left that starts with MAC OS and then lists all the PC drivers) and only the relevant drivers will appear. Most recent topmost down to oldest.
    You're a star...
    If only my wife agreed with that assessment.

  • JTable goes invisible when Frame resized

    Ive generated a JTable on base of records from database table is added in a panel and panel is added in a JTabbedPane. when I execute the query first JTable displays... but when I resize the Frame or minimize it and maximize again then JTable goes partially invisible .. i guess it is because of some problem with component paint method.. Ive tried
    calling repaint()
    validate
    doalyout
    but none of these works
    can any one help me...

    Havent tried your example, but this could work:
    SwingUtilities.updateComponentTreeUI(this);

  • How to make result of form post to jsp to appear in child frame

    Two frames inside a frameset, A and B (A is the first frame, B is the second). A has as it's source an html page containing a form with a submit button. The form posts to a jsp called Content.jsp. Works great, except: I want the results returned by Content.jsp to appear inside frame B. Seems like I've got the target for the form inside A wrong somehow, because when I click the submit button inside frame A, my results appear in a new browser instance, rather than inside B. Here's what the form declaration looks like:
    <form action="Content.jsp" method="post" target="_parent.frames[1]">
    If I make the target parent, that obviously replaces the whole page. If I make the target self, that obviously replaces the contents of frame A. I want to replace the contents of frame B. Any ideas?

    Thanks, but I'm not using IFrame, just Frame and FrameSet. In any event, I have tried using the name attribute to no avail. Here's a really simple version of the code:
    //Parent frameset
    <frameset rows="50%,50%">
    <frame name="A" src="testSubmit.html">
    <frame name="B" src="">
    </frameset>
    //Here's the form in testSubmit.html
    <form ACTION="testResult.html" METHOD="POST" TARGET="_parent.B">
    <input TYPE="SUBMIT" VALUE="Click Me">
    </form>
    I've also tried TARGET="_parent.frames[1]" with the same result -- a new browser window is launched rather than the results being displayed in B.
    Thanks for any assistance.

  • Jbutton below JTable in the same frame

    Hi All,
    I want to display a button below the JTable as shown below.
    [http://s361.photobucket.com/albums/oo52/ufucker_ufaggot/?action=view&current=untitled.jpg]
    Here is my code:
    Jbutton savebuton = new Jbutton("save");
    table.setPreferredScrollableViewportSize(new Dimension(500, 70));
    JScrollPane scrollPane = new JScrollPane(table);
    frame.getContentPane().add(scrollPane);
    frame.setVisible(true);
    frame.validate();How should i add savebutton to the frame to get the desired result.
    Regards

    OK - must admit that I had neglected to look at the screenshot. But yuck that is horrid, what is the point of all that blank space?
    In any case, putting the elements in a(nother) JPanel and setting an EmptyBorder to it can provide all that wasted space. Here is an example of that, for the button. Play with the numbers until you are happy with the result.
    import javax.swing.*;
    import java.awt.*;
    import javax.swing.border.*;
    class TwoElementsInFrame {
      public static void main(String[] args) {
        JFrame frame = new JFrame("TwoElementsInFrame");
        frame.setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
        JButton savebuton = new JButton("save");
        JPanel savePanel = new JPanel();
        savePanel.setBorder( new EmptyBorder(50,200,50,5) );
        savePanel.add( savebuton );
        JPanel panel = new JPanel(new BorderLayout(5,5));
        panel.add(savePanel, BorderLayout.SOUTH);
        JTable table = new JTable();
        table.setPreferredScrollableViewportSize(new Dimension(500, 70));
        JScrollPane scrollPane = new JScrollPane(table);
        panel.add(scrollPane, BorderLayout.CENTER);
        frame.getContentPane().add(panel);
        frame.setVisible(true);
        frame.validate();
        frame.pack();
        frame.setVisible(true);
    }

  • Detecting Maximized Frames in v1.3

    Hi
    Does anybody know a method for determining whether a JFrame is in the maximized state, in JDK1.3? I know that in 1.4 there is a getExtendedState() method for Frames, but not in 1.3! We need to detect whether out main frame is in the maximized state, as when we shut down our application, we need to record its size, position, and whether it was iconized, maximized, or just in the normal state. We can determine (using Frames getState() method) whether it was iconized or not, but not whether it was maxmized.
    At the moment, I can't see a way out, but really need to find one. If anyone know of a method, no matter how obscure it may seem, can you let me know please! DukeDollars are on offer for a good solution (and i'll increase the number of Dukes available if someone can come up with a great solution).
    Your help is really appreciated.
    Alan

    Hi,
    you can do it the dirty way in non 1.4. environments using java.awt.Robot to place the mousepointer over the window's maximize button and let the robot press it.
    I would suggest you place this best in your Components addNotify()-method, like this:
    public void addNotify() {
    super.addNotify(); //do the standard things
    //threaded because Window may not yet be showing
    Thread maximizerThread = new Thread() {
    public void run() {
         try {
         java.awt.Robot robot = new java.awt.Robot(); //create a new robot
         while (true) {
         System.out.println("try to maximize window...");
         Window win = getMaintainer().getBNOWindow().getWindow();//get your Frame/Window here
         System.out.println("showing.. "+win.isShowing());
         if (win.isShowing()) {
         Point loc = win.getLocationOnScreen(); //location of window on screen
         Dimension size = win.getSize(); //size of window
         robot.mouseMove(loc.x+size.width-32, loc.y+13); //move mousepointer to location of window's maximize button
         robot.mousePress(InputEvent.BUTTON1_MASK); //press it
         robot.mouseRelease(InputEvent.BUTTON1_MASK); //release it
         System.out.println("maximized...");
         break; //break the loop and end thread
         //window is not yet showing, wait some time and try again
         else this.sleep(50);
         catch (Exception e) {} //catch all, this is no important function
    maximizerThread.start();
    }

  • MTS Files appear to skip frames at clip transitions?

    My Canon Vixia HF S200 creates multiple sequentially numberd MTS files for long sequences.
    Snapping them together in Premier Pro CS5 yields a 'jump' between clips, as if frames were missing.
    Now, sombody on another forum insisted that there were no frames missing from the MTS files, and that re-muxing them would prove it.  So I did download 'tsMuxer' a free muxer, and combined a few into a single m2ts file and indeed the 'jump' vanished at the point where the previous 2 would have joined!
    So....  Any ideas?  Some setting?  Frame rate?
    Thanks,
    Dave

    That worked, thanks!
    So it appears that the camera is not actually creating individual complete MTS files with all the embedded structures, but they are really just chunks of one larger MTS object, broken up to stay under the 2 GB limit of some file systems?  Thus the media browser and other tools that know this combine them correctly?
    Whereas trying to look at them as individual complete MTS files must confuse some software, I'm guessing that Premiere, and other viewers that I played with, seem to have to skip some stuff in later files (not the first) to try and get in sync with the data stream or something?
    Just wondering how that is really working under the covers...

  • V2.2 bug: Album art sometimes appears as still frames from video podcasts

    I subscribe to the CNN "in case you missed it" video podcast. I have noticed that intermittently, the album art appearing on the iPhone screen for the playing song is a "stolen" frame from one of the CNN video podcasts. I have taken screenshots when this occurs and I can post them if desired.
    This is a question that I will mark as answered when I see that the problem has been corrected in a future firmware.

    This bug seems to have been fixed in IOS 3

  • How to add a jpanel in a jtable in a Jinternal frame

    hi to all,
    I want to add a panel above the table,which has been created in an internal frame,in the internal frame.
    i have created the table within the internal frame but unable to add panel in it..
    thanks

    Read the Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/layout/visual.html]How to Use Layout Managers. Mix and match layout managers to get the desired effect.

  • In Forms 10g, Item Prompts don't appear completely inside frames

    I have created a data block and a form layout by using the assistants.
    If I open the layout editor inside Forms Developer, I can see that the item prompts are completely contained inside the frame. However, when I run the form, some of the item prompts extend to the outside of the frame.
    I'm using Windows XP.
    Please, can you help me to solve the problem?
    Thanks in advance
    Jose I Bravo

    Hi Frank
    First of all, thanks a lot for your reply.
    I'm using the default font that Forms 10g uses. That is, I didn't specify any font.
    Am I the only one who has this problem? I've tried installing Forms 10g in different computers and all of them showed the same problem.
    Best regards.
    Jose
    Jose,
    are you using a font other than Courier
    New,Courier,courier,System,Terminal,Fixed,Fixedsys,Tim
    s,Times New Roman,MS Sans Serif,Arial ?
    If yes, then the font gets mapped on teh Web to one
    of teh above. If no mapping is defined in the
    forms90/java/oracle/forms/registry/registry.dat file
    then a default font is chosen. You can map any font
    to one of the supported in teh regsitry.dat file.
    Frank

  • How to make JTable appear disabled??

    Hi,
    I have searched the forum, and I couldn't find a suitable answer to my problem.
    I have a disabled table, but I want to give it that "Disabled Look" that other components have when they are disabled. For instance, I want the column headers to look like disabled JButtons, and I want the JTable itself to look like a disabled JCheckbox.
    Thanks in advance!

    Try this on the JTable and JTableHeader
    public static void setChildrenEnabled(Component comp, boolean enabled)
            comp.setEnabled(enabled);
            if(comp instanceof Container)
                Container container = (Container)comp;
                for(int idx = 0; idx < container.getComponentCount(); idx++)
                    setChildrenEnabled(container.getComponent(idx), enabled);
        }

  • When I go to my home page, some of the gadgets do not appear. The frame is there but the app is gone.

    Several of the gadgets on my igoogle homepage are no longer visible. I still get local weather, quotes and a couple of others but the rest aren't there. The frames that outline these missing gadgets are still in place but there's nothing inside them.
    Thanks....Joe

    Opening in the side bar is the default for bookmarks that are created via a link or button on a website.<br />
    You can check the Properties of a bookmark via the right-click context menu in the side bar (Ctrl+B; Cmd+B on Mac).<br />
    In the Bookmarks Manager (Bookmarks > Organize Bookmarks) you can click the More button in the Details pane at the bottom right.<br />
    Make sure that "Load this bookmark in the side bar" is not selected.<br />

Maybe you are looking for